ASoC: sti: fix errors management
Add missing error messages.
Propagate error of uni_reader_init and uni_reader_init.
Add return at end of dev_err strings.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/sound/soc/sti/sti_uniperif.c b/sound/soc/sti/sti_uniperif.c
index 549fac3..ee91ae5 100644
--- a/sound/soc/sti/sti_uniperif.c
+++ b/sound/soc/sti/sti_uniperif.c
@@ -293,7 +293,7 @@
/* The uniperipheral should be in stopped state */
if (uni->state != UNIPERIF_STATE_STOPPED) {
- dev_err(uni->dev, "%s: invalid uni state( %d)",
+ dev_err(uni->dev, "%s: invalid uni state( %d)\n",
__func__, (int)uni->state);
return -EBUSY;
}
@@ -301,7 +301,7 @@
/* Pinctrl: switch pinstate to sleep */
ret = pinctrl_pm_select_sleep_state(uni->dev);
if (ret)
- dev_err(uni->dev, "%s: failed to select pinctrl state",
+ dev_err(uni->dev, "%s: failed to select pinctrl state\n",
__func__);
return ret;
@@ -322,7 +322,7 @@
/* pinctrl: switch pinstate to default */
ret = pinctrl_pm_select_default_state(uni->dev);
if (ret)
- dev_err(uni->dev, "%s: failed to select pinctrl state",
+ dev_err(uni->dev, "%s: failed to select pinctrl state\n",
__func__);
return ret;
@@ -366,11 +366,12 @@
const struct of_device_id *of_id;
const struct sti_uniperiph_dev_data *dev_data;
const char *mode;
+ int ret;
/* Populate data structure depending on compatibility */
of_id = of_match_node(snd_soc_sti_match, node);
if (!of_id->data) {
- dev_err(dev, "data associated to device is missing");
+ dev_err(dev, "data associated to device is missing\n");
return -EINVAL;
}
dev_data = (struct sti_uniperiph_dev_data *)of_id->data;
@@ -389,7 +390,7 @@
uni->mem_region = platform_get_resource(priv->pdev, IORESOURCE_MEM, 0);
if (!uni->mem_region) {
- dev_err(dev, "Failed to get memory resource");
+ dev_err(dev, "Failed to get memory resource\n");
return -ENODEV;
}
@@ -403,7 +404,7 @@
uni->irq = platform_get_irq(priv->pdev, 0);
if (uni->irq < 0) {
- dev_err(dev, "Failed to get IRQ resource");
+ dev_err(dev, "Failed to get IRQ resource\n");
return -ENXIO;
}
@@ -421,12 +422,15 @@
dai_data->stream = dev_data->stream;
if (priv->dai_data.stream == SNDRV_PCM_STREAM_PLAYBACK) {
- uni_player_init(priv->pdev, uni);
+ ret = uni_player_init(priv->pdev, uni);
stream = &dai->playback;
} else {
- uni_reader_init(priv->pdev, uni);
+ ret = uni_reader_init(priv->pdev, uni);
stream = &dai->capture;
}
+ if (ret < 0)
+ return ret;
+
dai->ops = uni->dai_ops;
stream->stream_name = dai->name;
diff --git a/sound/soc/sti/uniperif_player.c b/sound/soc/sti/uniperif_player.c
index 1bc8ebc..c9b4670 100644
--- a/sound/soc/sti/uniperif_player.c
+++ b/sound/soc/sti/uniperif_player.c
@@ -67,7 +67,7 @@
}
if (!count) {
- dev_err(player->dev, "Failed to reset uniperif");
+ dev_err(player->dev, "Failed to reset uniperif\n");
return -EIO;
}
@@ -97,7 +97,7 @@
/* Check for fifo error (underrun) */
if (unlikely(status & UNIPERIF_ITS_FIFO_ERROR_MASK(player))) {
- dev_err(player->dev, "FIFO underflow error detected");
+ dev_err(player->dev, "FIFO underflow error detected\n");
/* Interrupt is just for information when underflow recovery */
if (player->underflow_enabled) {
@@ -119,7 +119,7 @@
/* Check for dma error (overrun) */
if (unlikely(status & UNIPERIF_ITS_DMA_ERROR_MASK(player))) {
- dev_err(player->dev, "DMA error detected");
+ dev_err(player->dev, "DMA error detected\n");
/* Disable interrupt so doesn't continually fire */
SET_UNIPERIF_ITM_BCLR_DMA_ERROR(player);
@@ -135,11 +135,14 @@
/* Check for underflow recovery done */
if (unlikely(status & UNIPERIF_ITM_UNDERFLOW_REC_DONE_MASK(player))) {
if (!player->underflow_enabled) {
- dev_err(player->dev, "unexpected Underflow recovering");
+ dev_err(player->dev,
+ "unexpected Underflow recovering\n");
return -EPERM;
}
/* Read the underflow recovery duration */
tmp = GET_UNIPERIF_STATUS_1_UNDERFLOW_DURATION(player);
+ dev_dbg(player->dev, "Underflow recovered (%d LR clocks max)\n",
+ tmp);
/* Clear the underflow recovery duration */
SET_UNIPERIF_BIT_CONTROL_CLR_UNDERFLOW_DURATION(player);
@@ -153,7 +156,7 @@
/* Check if underflow recovery failed */
if (unlikely(status &
UNIPERIF_ITM_UNDERFLOW_REC_FAILED_MASK(player))) {
- dev_err(player->dev, "Underflow recovery failed");
+ dev_err(player->dev, "Underflow recovery failed\n");
/* Stop the player */
snd_pcm_stream_lock(player->substream);
@@ -336,7 +339,7 @@
/* Oversampling must be multiple of 128 as iec958 frame is 32-bits */
if ((clk_div % 128) || (clk_div <= 0)) {
- dev_err(player->dev, "%s: invalid clk_div %d",
+ dev_err(player->dev, "%s: invalid clk_div %d\n",
__func__, clk_div);
return -EINVAL;
}
@@ -359,7 +362,7 @@
SET_UNIPERIF_I2S_FMT_DATA_SIZE_24(player);
break;
default:
- dev_err(player->dev, "format not supported");
+ dev_err(player->dev, "format not supported\n");
return -EINVAL;
}
@@ -448,12 +451,12 @@
* for 16 bits must be a multiple of 64
*/
if ((slot_width == 32) && (clk_div % 128)) {
- dev_err(player->dev, "%s: invalid clk_div", __func__);
+ dev_err(player->dev, "%s: invalid clk_div\n", __func__);
return -EINVAL;
}
if ((slot_width == 16) && (clk_div % 64)) {
- dev_err(player->dev, "%s: invalid clk_div", __func__);
+ dev_err(player->dev, "%s: invalid clk_div\n", __func__);
return -EINVAL;
}
@@ -471,7 +474,7 @@
SET_UNIPERIF_I2S_FMT_DATA_SIZE_16(player);
break;
default:
- dev_err(player->dev, "subframe format not supported");
+ dev_err(player->dev, "subframe format not supported\n");
return -EINVAL;
}
@@ -491,7 +494,7 @@
break;
default:
- dev_err(player->dev, "format not supported");
+ dev_err(player->dev, "format not supported\n");
return -EINVAL;
}
@@ -504,7 +507,7 @@
/* Number of channelsmust be even*/
if ((runtime->channels % 2) || (runtime->channels < 2) ||
(runtime->channels > 10)) {
- dev_err(player->dev, "%s: invalid nb of channels", __func__);
+ dev_err(player->dev, "%s: invalid nb of channels\n", __func__);
return -EINVAL;
}
@@ -758,7 +761,7 @@
/* The player should be stopped */
if (player->state != UNIPERIF_STATE_STOPPED) {
- dev_err(player->dev, "%s: invalid player state %d", __func__,
+ dev_err(player->dev, "%s: invalid player state %d\n", __func__,
player->state);
return -EINVAL;
}
@@ -787,7 +790,8 @@
/* Trigger limit must be an even number */
if ((!trigger_limit % 2) || (trigger_limit != 1 && transfer_size % 2) ||
(trigger_limit > UNIPERIF_CONFIG_DMA_TRIG_LIMIT_MASK(player))) {
- dev_err(player->dev, "invalid trigger limit %d", trigger_limit);
+ dev_err(player->dev, "invalid trigger limit %d\n",
+ trigger_limit);
return -EINVAL;
}
@@ -808,7 +812,7 @@
ret = uni_player_prepare_tdm(player, runtime);
break;
default:
- dev_err(player->dev, "invalid player type");
+ dev_err(player->dev, "invalid player type\n");
return -EINVAL;
}
@@ -848,7 +852,7 @@
SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(player);
break;
default:
- dev_err(player->dev, "format not supported");
+ dev_err(player->dev, "format not supported\n");
return -EINVAL;
}
@@ -866,13 +870,13 @@
/* The player should be stopped */
if (player->state != UNIPERIF_STATE_STOPPED) {
- dev_err(player->dev, "%s: invalid player state", __func__);
+ dev_err(player->dev, "%s: invalid player state\n", __func__);
return -EINVAL;
}
ret = clk_prepare_enable(player->clk);
if (ret) {
- dev_err(player->dev, "%s: Failed to enable clock", __func__);
+ dev_err(player->dev, "%s: Failed to enable clock\n", __func__);
return ret;
}
@@ -934,7 +938,7 @@
/* The player should not be in stopped state */
if (player->state == UNIPERIF_STATE_STOPPED) {
- dev_err(player->dev, "%s: invalid player state", __func__);
+ dev_err(player->dev, "%s: invalid player state\n", __func__);
return -EINVAL;
}
@@ -969,7 +973,7 @@
ret = regmap_field_write(player->clk_sel, 1);
if (ret) {
dev_err(player->dev,
- "%s: Failed to select freq synth clock",
+ "%s: Failed to select freq synth clock\n",
__func__);
return ret;
}
@@ -1066,7 +1070,7 @@
ret = uni_player_parse_dt_audio_glue(pdev, player);
if (ret < 0) {
- dev_err(player->dev, "Failed to parse DeviceTree");
+ dev_err(player->dev, "Failed to parse DeviceTree\n");
return ret;
}
@@ -1081,15 +1085,17 @@
/* Get uniperif resource */
player->clk = of_clk_get(pdev->dev.of_node, 0);
- if (IS_ERR(player->clk))
+ if (IS_ERR(player->clk)) {
+ dev_err(player->dev, "Failed to get clock\n");
ret = PTR_ERR(player->clk);
+ }
/* Select the frequency synthesizer clock */
if (player->clk_sel) {
ret = regmap_field_write(player->clk_sel, 1);
if (ret) {
dev_err(player->dev,
- "%s: Failed to select freq synth clock",
+ "%s: Failed to select freq synth clock\n",
__func__);
return ret;
}
@@ -1101,7 +1107,7 @@
ret = regmap_field_write(player->valid_sel, player->id);
if (ret) {
dev_err(player->dev,
- "%s: unable to connect to tdm bus", __func__);
+ "%s: unable to connect to tdm bus\n", __func__);
return ret;
}
}
@@ -1109,8 +1115,10 @@
ret = devm_request_irq(&pdev->dev, player->irq,
uni_player_irq_handler, IRQF_SHARED,
dev_name(&pdev->dev), player);
- if (ret < 0)
+ if (ret < 0) {
+ dev_err(player->dev, "unable to request IRQ %d\n", player->irq);
return ret;
+ }
mutex_init(&player->ctrl_lock);
diff --git a/sound/soc/sti/uniperif_reader.c b/sound/soc/sti/uniperif_reader.c
index 0e1c3ee..09314f8 100644
--- a/sound/soc/sti/uniperif_reader.c
+++ b/sound/soc/sti/uniperif_reader.c
@@ -52,7 +52,7 @@
if (reader->state == UNIPERIF_STATE_STOPPED) {
/* Unexpected IRQ: do nothing */
- dev_warn(reader->dev, "unexpected IRQ ");
+ dev_warn(reader->dev, "unexpected IRQ\n");
return IRQ_HANDLED;
}
@@ -62,7 +62,7 @@
/* Check for fifo overflow error */
if (unlikely(status & UNIPERIF_ITS_FIFO_ERROR_MASK(reader))) {
- dev_err(reader->dev, "FIFO error detected");
+ dev_err(reader->dev, "FIFO error detected\n");
snd_pcm_stream_lock(reader->substream);
snd_pcm_stop(reader->substream, SNDRV_PCM_STATE_XRUN);
@@ -105,7 +105,7 @@
SET_UNIPERIF_I2S_FMT_DATA_SIZE_16(reader);
break;
default:
- dev_err(reader->dev, "subframe format not supported");
+ dev_err(reader->dev, "subframe format not supported\n");
return -EINVAL;
}
@@ -125,14 +125,14 @@
break;
default:
- dev_err(reader->dev, "format not supported");
+ dev_err(reader->dev, "format not supported\n");
return -EINVAL;
}
/* Number of channels must be even */
if ((runtime->channels % 2) || (runtime->channels < 2) ||
(runtime->channels > 10)) {
- dev_err(reader->dev, "%s: invalid nb of channels", __func__);
+ dev_err(reader->dev, "%s: invalid nb of channels\n", __func__);
return -EINVAL;
}
@@ -190,7 +190,7 @@
/* The reader should be stopped */
if (reader->state != UNIPERIF_STATE_STOPPED) {
- dev_err(reader->dev, "%s: invalid reader state %d", __func__,
+ dev_err(reader->dev, "%s: invalid reader state %d\n", __func__,
reader->state);
return -EINVAL;
}
@@ -219,7 +219,8 @@
if ((!trigger_limit % 2) ||
(trigger_limit != 1 && transfer_size % 2) ||
(trigger_limit > UNIPERIF_CONFIG_DMA_TRIG_LIMIT_MASK(reader))) {
- dev_err(reader->dev, "invalid trigger limit %d", trigger_limit);
+ dev_err(reader->dev, "invalid trigger limit %d\n",
+ trigger_limit);
return -EINVAL;
}
@@ -246,7 +247,7 @@
SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(reader);
break;
default:
- dev_err(reader->dev, "format not supported");
+ dev_err(reader->dev, "format not supported\n");
return -EINVAL;
}
@@ -294,7 +295,7 @@
count--;
}
if (!count) {
- dev_err(reader->dev, "Failed to reset uniperif");
+ dev_err(reader->dev, "Failed to reset uniperif\n");
return -EIO;
}
@@ -305,7 +306,7 @@
{
/* The reader should be stopped */
if (reader->state != UNIPERIF_STATE_STOPPED) {
- dev_err(reader->dev, "%s: invalid reader state", __func__);
+ dev_err(reader->dev, "%s: invalid reader state\n", __func__);
return -EINVAL;
}
@@ -325,7 +326,7 @@
{
/* The reader should not be in stopped state */
if (reader->state == UNIPERIF_STATE_STOPPED) {
- dev_err(reader->dev, "%s: invalid reader state", __func__);
+ dev_err(reader->dev, "%s: invalid reader state\n", __func__);
return -EINVAL;
}
@@ -423,7 +424,7 @@
uni_reader_irq_handler, IRQF_SHARED,
dev_name(&pdev->dev), reader);
if (ret < 0) {
- dev_err(&pdev->dev, "Failed to request IRQ");
+ dev_err(&pdev->dev, "Failed to request IRQ\n");
return -EBUSY;
}