diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 5ac27ed..497dbb2 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3037,7 +3037,7 @@
 
 		/* maybe switch power back on (e.g. root hub was reset) */
 		if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
-				&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
+				&& !(portstatus & USB_PORT_STAT_POWER))
 			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
 
 		if (portstatus & USB_PORT_STAT_ENABLE)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index c7178bc..c440181 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -659,7 +659,7 @@
 		 * Even if OWNER is set, so the port is owned by the
 		 * companion controller, khubd needs to be able to clear
 		 * the port-change status bits (especially
-		 * USB_PORT_FEAT_C_CONNECTION).
+		 * USB_PORT_STAT_C_CONNECTION).
 		 */
 
 		switch (wValue) {
@@ -729,12 +729,12 @@
 
 		// wPortChange bits
 		if (temp & PORT_CSC)
-			status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+			status |= USB_PORT_STAT_C_CONNECTION << 16;
 		if (temp & PORT_PEC)
-			status |= 1 << USB_PORT_FEAT_C_ENABLE;
+			status |= USB_PORT_STAT_C_ENABLE << 16;
 
 		if ((temp & PORT_OCC) && !ignore_oc){
-			status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
 
 			/*
 			 * Hubs should disable port power on over-current.
@@ -791,7 +791,7 @@
 		if ((temp & PORT_RESET)
 				&& time_after_eq(jiffies,
 					ehci->reset_done[wIndex])) {
-			status |= 1 << USB_PORT_FEAT_C_RESET;
+			status |= USB_PORT_STAT_C_RESET << 16;
 			ehci->reset_done [wIndex] = 0;
 
 			/* force reset to complete */
@@ -833,7 +833,7 @@
 		 */
 
 		if (temp & PORT_CONNECT) {
-			status |= 1 << USB_PORT_FEAT_CONNECTION;
+			status |= USB_PORT_STAT_CONNECTION;
 			// status may be from integrated TT
 			if (ehci->has_hostpc) {
 				temp1 = ehci_readl(ehci, hostpc_reg);
@@ -842,11 +842,11 @@
 				status |= ehci_port_speed(ehci, temp);
 		}
 		if (temp & PORT_PE)
-			status |= 1 << USB_PORT_FEAT_ENABLE;
+			status |= USB_PORT_STAT_ENABLE;
 
 		/* maybe the port was unsuspended without our knowledge */
 		if (temp & (PORT_SUSPEND|PORT_RESUME)) {
-			status |= 1 << USB_PORT_FEAT_SUSPEND;
+			status |= USB_PORT_STAT_SUSPEND;
 		} else if (test_bit(wIndex, &ehci->suspended_ports)) {
 			clear_bit(wIndex, &ehci->suspended_ports);
 			ehci->reset_done[wIndex] = 0;
@@ -855,13 +855,13 @@
 		}
 
 		if (temp & PORT_OC)
-			status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+			status |= USB_PORT_STAT_OVERCURRENT;
 		if (temp & PORT_RESET)
-			status |= 1 << USB_PORT_FEAT_RESET;
+			status |= USB_PORT_STAT_RESET;
 		if (temp & PORT_POWER)
-			status |= 1 << USB_PORT_FEAT_POWER;
+			status |= USB_PORT_STAT_POWER;
 		if (test_bit(wIndex, &ehci->port_c_suspend))
-			status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+			status |= USB_PORT_STAT_C_SUSPEND << 16;
 
 #ifndef	VERBOSE_DEBUG
 	if (status & ~0xffff)	/* only if wPortChange is interesting */
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index acc157d..6a6a508 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -1265,7 +1265,7 @@
 
 	/* don't submit to a dead or disabled port */
 	if (!((isp1362_hcd->rhport[0] | isp1362_hcd->rhport[1]) &
-	      (1 << USB_PORT_FEAT_ENABLE)) ||
+	      USB_PORT_STAT_ENABLE) ||
 	    !HC_IS_RUNNING(hcd->state)) {
 		kfree(ep);
 		retval = -ENODEV;
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index cfdac6d..13f7d12 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1923,7 +1923,7 @@
 		 * Even if OWNER is set, so the port is owned by the
 		 * companion controller, khubd needs to be able to clear
 		 * the port-change status bits (especially
-		 * USB_PORT_FEAT_C_CONNECTION).
+		 * USB_PORT_STAT_C_CONNECTION).
 		 */
 
 		switch (wValue) {
@@ -1987,7 +1987,7 @@
 
 		/* wPortChange bits */
 		if (temp & PORT_CSC)
-			status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+			status |= USB_PORT_STAT_C_CONNECTION << 16;
 
 
 		/* whoever resumes must GetPortStatus to complete it!! */
@@ -2007,7 +2007,7 @@
 			/* resume completed? */
 			else if (time_after_eq(jiffies,
 					priv->reset_done)) {
-				status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+				status |= USB_PORT_STAT_C_SUSPEND << 16;
 				priv->reset_done = 0;
 
 				/* stop resume signaling */
@@ -2031,7 +2031,7 @@
 		if ((temp & PORT_RESET)
 				&& time_after_eq(jiffies,
 					priv->reset_done)) {
-			status |= 1 << USB_PORT_FEAT_C_RESET;
+			status |= USB_PORT_STAT_C_RESET << 16;
 			priv->reset_done = 0;
 
 			/* force reset to complete */
@@ -2062,18 +2062,18 @@
 			printk(KERN_ERR "Warning: PORT_OWNER is set\n");
 
 		if (temp & PORT_CONNECT) {
-			status |= 1 << USB_PORT_FEAT_CONNECTION;
+			status |= USB_PORT_STAT_CONNECTION;
 			/* status may be from integrated TT */
 			status |= ehci_port_speed(priv, temp);
 		}
 		if (temp & PORT_PE)
-			status |= 1 << USB_PORT_FEAT_ENABLE;
+			status |= USB_PORT_STAT_ENABLE;
 		if (temp & (PORT_SUSPEND|PORT_RESUME))
-			status |= 1 << USB_PORT_FEAT_SUSPEND;
+			status |= USB_PORT_STAT_SUSPEND;
 		if (temp & PORT_RESET)
-			status |= 1 << USB_PORT_FEAT_RESET;
+			status |= USB_PORT_STAT_RESET;
 		if (temp & PORT_POWER)
-			status |= 1 << USB_PORT_FEAT_POWER;
+			status |= USB_PORT_STAT_POWER;
 
 		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
 		break;
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 8f04c0a..f608dfd 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3201,7 +3201,7 @@
 		 * Even if OWNER is set, so the port is owned by the
 		 * companion controller, khubd needs to be able to clear
 		 * the port-change status bits (especially
-		 * USB_PORT_FEAT_C_CONNECTION).
+		 * USB_PORT_STAT_C_CONNECTION).
 		 */
 
 		switch (wValue) {
@@ -3263,11 +3263,11 @@
 
 		/* wPortChange bits */
 		if (temp & PORT_CSC)
-			status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+			status |= USB_PORT_STAT_C_CONNECTION << 16;
 		if (temp & PORT_PEC)
-			status |= 1 << USB_PORT_FEAT_C_ENABLE;
+			status |= USB_PORT_STAT_C_ENABLE << 16;
 		if ((temp & PORT_OCC) && !ignore_oc)
-			status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
 
 		/* whoever resumes must GetPortStatus to complete it!! */
 		if (temp & PORT_RESUME) {
@@ -3285,7 +3285,7 @@
 			/* resume completed? */
 			else if (time_after_eq(jiffies,
 					oxu->reset_done[wIndex])) {
-				status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+				status |= USB_PORT_STAT_C_SUSPEND << 16;
 				oxu->reset_done[wIndex] = 0;
 
 				/* stop resume signaling */
@@ -3308,7 +3308,7 @@
 		if ((temp & PORT_RESET)
 				&& time_after_eq(jiffies,
 					oxu->reset_done[wIndex])) {
-			status |= 1 << USB_PORT_FEAT_C_RESET;
+			status |= USB_PORT_STAT_C_RESET << 16;
 			oxu->reset_done[wIndex] = 0;
 
 			/* force reset to complete */
@@ -3347,20 +3347,20 @@
 		 */
 
 		if (temp & PORT_CONNECT) {
-			status |= 1 << USB_PORT_FEAT_CONNECTION;
+			status |= USB_PORT_STAT_CONNECTION;
 			/* status may be from integrated TT */
 			status |= oxu_port_speed(oxu, temp);
 		}
 		if (temp & PORT_PE)
-			status |= 1 << USB_PORT_FEAT_ENABLE;
+			status |= USB_PORT_STAT_ENABLE;
 		if (temp & (PORT_SUSPEND|PORT_RESUME))
-			status |= 1 << USB_PORT_FEAT_SUSPEND;
+			status |= USB_PORT_STAT_SUSPEND;
 		if (temp & PORT_OC)
-			status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+			status |= USB_PORT_STAT_OVERCURRENT;
 		if (temp & PORT_RESET)
-			status |= 1 << USB_PORT_FEAT_RESET;
+			status |= USB_PORT_STAT_RESET;
 		if (temp & PORT_POWER)
-			status |= 1 << USB_PORT_FEAT_POWER;
+			status |= USB_PORT_STAT_POWER;
 
 #ifndef	OXU_VERBOSE_DEBUG
 	if (status & ~0xffff)	/* only if wPortChange is interesting */
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index a004a12..6db57ab 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -1018,10 +1018,10 @@
 	rh->old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port)) & LNST;
 	rh->scount = R8A66597_MAX_SAMPLING;
 	if (connect)
-		rh->port |= 1 << USB_PORT_FEAT_CONNECTION;
+		rh->port |= USB_PORT_STAT_CONNECTION;
 	else
-		rh->port &= ~(1 << USB_PORT_FEAT_CONNECTION);
-	rh->port |= 1 << USB_PORT_FEAT_C_CONNECTION;
+		rh->port &= ~USB_PORT_STAT_CONNECTION;
+	rh->port |= USB_PORT_STAT_C_CONNECTION << 16;
 
 	r8a66597_root_hub_start_polling(r8a66597);
 }
@@ -1065,8 +1065,8 @@
 	else if (speed == LSMODE)
 		rh->port |= USB_PORT_STAT_LOW_SPEED;
 
-	rh->port &= ~(1 << USB_PORT_FEAT_RESET);
-	rh->port |= 1 << USB_PORT_FEAT_ENABLE;
+	rh->port &= USB_PORT_STAT_RESET;
+	rh->port |= USB_PORT_STAT_ENABLE;
 }
 
 /* this function must be called with interrupt disabled */
@@ -1705,7 +1705,7 @@
 	u16 tmp;
 	struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 
-	if (rh->port & (1 << USB_PORT_FEAT_RESET)) {
+	if (rh->port & USB_PORT_STAT_RESET) {
 		unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
 		tmp = r8a66597_read(r8a66597, dvstctr_reg);
@@ -1717,7 +1717,7 @@
 			r8a66597_usb_connect(r8a66597, port);
 	}
 
-	if (!(rh->port & (1 << USB_PORT_FEAT_CONNECTION))) {
+	if (!(rh->port & USB_PORT_STAT_CONNECTION)) {
 		r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
 		r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
 	}
@@ -2185,7 +2185,7 @@
 
 		switch (wValue) {
 		case USB_PORT_FEAT_ENABLE:
-			rh->port &= ~(1 << USB_PORT_FEAT_POWER);
+			rh->port &= ~USB_PORT_STAT_POWER;
 			break;
 		case USB_PORT_FEAT_SUSPEND:
 			break;
@@ -2226,12 +2226,12 @@
 			break;
 		case USB_PORT_FEAT_POWER:
 			r8a66597_port_power(r8a66597, port, 1);
-			rh->port |= (1 << USB_PORT_FEAT_POWER);
+			rh->port |= USB_PORT_STAT_POWER;
 			break;
 		case USB_PORT_FEAT_RESET: {
 			struct r8a66597_device *dev = rh->dev;
 
-			rh->port |= (1 << USB_PORT_FEAT_RESET);
+			rh->port |= USB_PORT_STAT_RESET;
 
 			disable_r8a66597_pipe_all(r8a66597, dev);
 			free_usb_address(r8a66597, dev, 1);
@@ -2269,12 +2269,12 @@
 		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 		unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
-		if (!(rh->port & (1 << USB_PORT_FEAT_ENABLE)))
+		if (!(rh->port & USB_PORT_STAT_ENABLE))
 			continue;
 
 		dbg("suspend port = %d", port);
 		r8a66597_bclr(r8a66597, UACT, dvstctr_reg);	/* suspend */
-		rh->port |= 1 << USB_PORT_FEAT_SUSPEND;
+		rh->port |= USB_PORT_STAT_SUSPEND;
 
 		if (rh->dev->udev->do_remote_wakeup) {
 			msleep(3);	/* waiting last SOF */
@@ -2300,12 +2300,12 @@
 		struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 		unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
-		if (!(rh->port & (1 << USB_PORT_FEAT_SUSPEND)))
+		if (!(rh->port & USB_PORT_STAT_SUSPEND))
 			continue;
 
 		dbg("resume port = %d", port);
-		rh->port &= ~(1 << USB_PORT_FEAT_SUSPEND);
-		rh->port |= 1 << USB_PORT_FEAT_C_SUSPEND;
+		rh->port &= ~USB_PORT_STAT_SUSPEND;
+		rh->port |= USB_PORT_STAT_C_SUSPEND < 16;
 		r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg);
 		msleep(50);
 		r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index dcd7fab..bcf9f0e 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -90,10 +90,10 @@
 
 	/* hub is inactive unless the port is powered */
 	if (is_on) {
-		if (sl811->port1 & (1 << USB_PORT_FEAT_POWER))
+		if (sl811->port1 & USB_PORT_STAT_POWER)
 			return;
 
-		sl811->port1 = (1 << USB_PORT_FEAT_POWER);
+		sl811->port1 = USB_PORT_STAT_POWER;
 		sl811->irq_enable = SL11H_INTMASK_INSRMV;
 	} else {
 		sl811->port1 = 0;
@@ -407,7 +407,7 @@
 
 static inline void start_transfer(struct sl811 *sl811)
 {
-	if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND))
+	if (sl811->port1 & USB_PORT_STAT_SUSPEND)
 		return;
 	if (sl811->active_a == NULL) {
 		sl811->active_a = start(sl811, SL811_EP_A(SL811_HOST_BUF));
@@ -721,23 +721,23 @@
 		 * force the reset and make khubd clean up later.
 		 */
 		if (irqstat & SL11H_INTMASK_RD)
-			sl811->port1 &= ~(1 << USB_PORT_FEAT_CONNECTION);
+			sl811->port1 &= ~USB_PORT_STAT_CONNECTION;
 		else
-			sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION;
+			sl811->port1 |= USB_PORT_STAT_CONNECTION;
 
-		sl811->port1 |= 1 << USB_PORT_FEAT_C_CONNECTION;
+		sl811->port1 |= USB_PORT_STAT_C_CONNECTION << 16;
 
 	} else if (irqstat & SL11H_INTMASK_RD) {
-		if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) {
+		if (sl811->port1 & USB_PORT_STAT_SUSPEND) {
 			DBG("wakeup\n");
-			sl811->port1 |= 1 << USB_PORT_FEAT_C_SUSPEND;
+			sl811->port1 |= USB_PORT_STAT_C_SUSPEND << 16;
 			sl811->stat_wake++;
 		} else
 			irqstat &= ~SL11H_INTMASK_RD;
 	}
 
 	if (irqstat) {
-		if (sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))
+		if (sl811->port1 & USB_PORT_STAT_ENABLE)
 			start_transfer(sl811);
 		ret = IRQ_HANDLED;
 		if (retries--)
@@ -819,7 +819,7 @@
 	spin_lock_irqsave(&sl811->lock, flags);
 
 	/* don't submit to a dead or disabled port */
-	if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))
+	if (!(sl811->port1 & USB_PORT_STAT_ENABLE)
 			|| !HC_IS_RUNNING(hcd->state)) {
 		retval = -ENODEV;
 		kfree(ep);
@@ -1119,8 +1119,8 @@
 	unsigned long	flags;
 	u8		irqstat;
 	u8		signaling = sl811->ctrl1 & SL11H_CTL1MASK_FORCE;
-	const u32	mask = (1 << USB_PORT_FEAT_CONNECTION)
-				| (1 << USB_PORT_FEAT_ENABLE)
+	const u32	mask = USB_PORT_STAT_CONNECTION
+				| USB_PORT_STAT_ENABLE
 				| USB_PORT_STAT_LOW_SPEED;
 
 	spin_lock_irqsave(&sl811->lock, flags);
@@ -1135,8 +1135,8 @@
 	switch (signaling) {
 	case SL11H_CTL1MASK_SE0:
 		DBG("end reset\n");
-		sl811->port1 = (1 << USB_PORT_FEAT_C_RESET)
-				| (1 << USB_PORT_FEAT_POWER);
+		sl811->port1 = (USB_PORT_STAT_C_RESET << 16)
+				 | USB_PORT_STAT_POWER;
 		sl811->ctrl1 = 0;
 		/* don't wrongly ack RD */
 		if (irqstat & SL11H_INTMASK_INSRMV)
@@ -1144,7 +1144,7 @@
 		break;
 	case SL11H_CTL1MASK_K:
 		DBG("end resume\n");
-		sl811->port1 &= ~(1 << USB_PORT_FEAT_SUSPEND);
+		sl811->port1 &= ~USB_PORT_STAT_SUSPEND;
 		break;
 	default:
 		DBG("odd timer signaling: %02x\n", signaling);
@@ -1154,9 +1154,9 @@
 
 	if (irqstat & SL11H_INTMASK_RD) {
 		/* usbcore nukes all pending transactions on disconnect */
-		if (sl811->port1 & (1 << USB_PORT_FEAT_CONNECTION))
-			sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION)
-					| (1 << USB_PORT_FEAT_C_ENABLE);
+		if (sl811->port1 & USB_PORT_STAT_CONNECTION)
+			sl811->port1 |= (USB_PORT_STAT_C_CONNECTION << 16)
+					| (USB_PORT_STAT_C_ENABLE << 16);
 		sl811->port1 &= ~mask;
 		sl811->irq_enable = SL11H_INTMASK_INSRMV;
 	} else {
@@ -1166,7 +1166,7 @@
 		sl811->irq_enable = SL11H_INTMASK_INSRMV | SL11H_INTMASK_RD;
 	}
 
-	if (sl811->port1 & (1 << USB_PORT_FEAT_CONNECTION)) {
+	if (sl811->port1 & USB_PORT_STAT_CONNECTION) {
 		u8	ctrl2 = SL811HS_CTL2_INIT;
 
 		sl811->irq_enable |= SL11H_INTMASK_DONE_A;
@@ -1233,7 +1233,7 @@
 
 		switch (wValue) {
 		case USB_PORT_FEAT_ENABLE:
-			sl811->port1 &= (1 << USB_PORT_FEAT_POWER);
+			sl811->port1 &= USB_PORT_STAT_POWER;
 			sl811->ctrl1 = 0;
 			sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
 			sl811->irq_enable = SL11H_INTMASK_INSRMV;
@@ -1241,7 +1241,7 @@
 						sl811->irq_enable);
 			break;
 		case USB_PORT_FEAT_SUSPEND:
-			if (!(sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)))
+			if (!(sl811->port1 & USB_PORT_STAT_SUSPEND))
 				break;
 
 			/* 20 msec of resume/K signaling, other irqs blocked */
@@ -1290,9 +1290,9 @@
 			goto error;
 		switch (wValue) {
 		case USB_PORT_FEAT_SUSPEND:
-			if (sl811->port1 & (1 << USB_PORT_FEAT_RESET))
+			if (sl811->port1 & USB_PORT_STAT_RESET)
 				goto error;
-			if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE)))
+			if (!(sl811->port1 & USB_PORT_STAT_ENABLE))
 				goto error;
 
 			DBG("suspend...\n");
@@ -1303,9 +1303,9 @@
 			port_power(sl811, 1);
 			break;
 		case USB_PORT_FEAT_RESET:
-			if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND))
+			if (sl811->port1 & USB_PORT_STAT_SUSPEND)
 				goto error;
-			if (!(sl811->port1 & (1 << USB_PORT_FEAT_POWER)))
+			if (!(sl811->port1 & USB_PORT_STAT_POWER))
 				break;
 
 			/* 50 msec of reset/SE0 signaling, irqs blocked */
@@ -1314,7 +1314,7 @@
 						sl811->irq_enable);
 			sl811->ctrl1 = SL11H_CTL1MASK_SE0;
 			sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
-			sl811->port1 |= (1 << USB_PORT_FEAT_RESET);
+			sl811->port1 |= USB_PORT_STAT_RESET;
 			mod_timer(&sl811->timer, jiffies
 					+ msecs_to_jiffies(50));
 			break;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index dd69df1..325b47a 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -205,27 +205,27 @@
 
 		/* wPortChange bits */
 		if (temp & PORT_CSC)
-			status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+			status |= USB_PORT_STAT_C_CONNECTION << 16;
 		if (temp & PORT_PEC)
-			status |= 1 << USB_PORT_FEAT_C_ENABLE;
+			status |= USB_PORT_STAT_C_ENABLE << 16;
 		if ((temp & PORT_OCC))
-			status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+			status |= USB_PORT_STAT_C_OVERCURRENT << 16;
 		/*
 		 * FIXME ignoring suspend, reset, and USB 2.1/3.0 specific
 		 * changes
 		 */
 		if (temp & PORT_CONNECT) {
-			status |= 1 << USB_PORT_FEAT_CONNECTION;
+			status |= USB_PORT_STAT_CONNECTION;
 			status |= xhci_port_speed(temp);
 		}
 		if (temp & PORT_PE)
-			status |= 1 << USB_PORT_FEAT_ENABLE;
+			status |= USB_PORT_STAT_ENABLE;
 		if (temp & PORT_OC)
-			status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+			status |= USB_PORT_STAT_OVERCURRENT;
 		if (temp & PORT_RESET)
-			status |= 1 << USB_PORT_FEAT_RESET;
+			status |= USB_PORT_STAT_RESET;
 		if (temp & PORT_POWER)
-			status |= 1 << USB_PORT_FEAT_POWER;
+			status |= USB_PORT_STAT_POWER;
 		xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
 		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
 		break;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 705cc4a..ced6d9e 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -353,8 +353,7 @@
 	 * which cause occasional OPT A "Did not receive reset after connect"
 	 * errors.
 	 */
-	musb->port1_status &=
-		~(1 << USB_PORT_FEAT_C_CONNECTION);
+	musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
 }
 
 #endif
@@ -530,8 +529,8 @@
 				musb_writeb(mbase, MUSB_DEVCTL, devctl);
 			} else {
 				musb->port1_status |=
-					  (1 << USB_PORT_FEAT_OVER_CURRENT)
-					| (1 << USB_PORT_FEAT_C_OVER_CURRENT);
+					  USB_PORT_STAT_OVERCURRENT
+					| (USB_PORT_STAT_C_OVERCURRENT << 16);
 			}
 			break;
 		default:
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 7775e1c0..92e85e0 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -183,8 +183,8 @@
 
 void musb_root_disconnect(struct musb *musb)
 {
-	musb->port1_status = (1 << USB_PORT_FEAT_POWER)
-			| (1 << USB_PORT_FEAT_C_CONNECTION);
+	musb->port1_status = USB_PORT_STAT_POWER
+			| (USB_PORT_STAT_C_CONNECTION << 16);
 
 	usb_hcd_poll_rh_status(musb_to_hcd(musb));
 	musb->is_active = 0;