mmc: mxcmmc: Allow binding a regulator to manage the MMC card voltage
This implementation is based on the pxamci.c driver and it will
be used to support the mx31_3ds machine.
Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index bdd2cbb..1a7f48c 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -31,6 +31,7 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
#include <asm/dma.h>
#include <asm/irq.h>
@@ -141,10 +142,45 @@
struct work_struct datawork;
spinlock_t lock;
+
+ struct regulator *vcc;
};
static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios);
+static inline void mxcmci_init_ocr(struct mxcmci_host *host)
+{
+#ifdef CONFIG_REGULATOR
+ host->vcc = regulator_get(mmc_dev(host->mmc), "vmmc");
+
+ if (IS_ERR(host->vcc)) {
+ host->vcc = NULL;
+ } else {
+ host->mmc->ocr_avail = mmc_regulator_get_ocrmask(host->vcc);
+ if (host->pdata && host->pdata->ocr_avail)
+ dev_warn(mmc_dev(host->mmc),
+ "pdata->ocr_avail will not be used\n");
+ }
+#endif
+ if (host->vcc == NULL) {
+ /* fall-back to platform data */
+ if (host->pdata && host->pdata->ocr_avail)
+ host->mmc->ocr_avail = host->pdata->ocr_avail;
+ else
+ host->mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ }
+}
+
+static inline void mxcmci_set_power(struct mxcmci_host *host, unsigned int vdd)
+{
+#ifdef CONFIG_REGULATOR
+ if (host->vcc)
+ mmc_regulator_set_ocr(host->vcc, vdd);
+#endif
+ if (host->pdata && host->pdata->setpower)
+ host->pdata->setpower(mmc_dev(host->mmc), vdd);
+}
+
static inline int mxcmci_use_dma(struct mxcmci_host *host)
{
return host->do_dma;
@@ -680,9 +716,9 @@
host->cmdat &= ~CMD_DAT_CONT_BUS_WIDTH_4;
if (host->power_mode != ios->power_mode) {
- if (host->pdata && host->pdata->setpower)
- host->pdata->setpower(mmc_dev(mmc), ios->vdd);
+ mxcmci_set_power(host, ios->vdd);
host->power_mode = ios->power_mode;
+
if (ios->power_mode == MMC_POWER_ON)
host->cmdat |= CMD_DAT_CONT_INIT;
}
@@ -807,10 +843,7 @@
host->pdata = pdev->dev.platform_data;
spin_lock_init(&host->lock);
- if (host->pdata && host->pdata->ocr_avail)
- mmc->ocr_avail = host->pdata->ocr_avail;
- else
- mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ mxcmci_init_ocr(host);
if (host->pdata && host->pdata->dat3_card_detect)
host->default_irq_mask =
@@ -915,6 +948,9 @@
mmc_remove_host(mmc);
+ if (host->vcc)
+ regulator_put(host->vcc);
+
if (host->pdata && host->pdata->exit)
host->pdata->exit(&pdev->dev, mmc);