V4L/DVB (6948): HVR950 requires additional settings for audio to properly work
Thanks to Markus Rechberger <mrechberger@gmail.com> for retriving those
commands.
Also, MTS firmware is required for audio to work on HVR950.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index e00de32..78be0dc 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -179,6 +179,7 @@
.tda9887_conf = TDA9887_PRESENT,
.tuner_type = TUNER_XC2028,
.has_tuner = 1,
+ .mts_firmware = 1,
.decoder = EM28XX_TVP5150,
.input = { {
.type = EM28XX_VMUX_TELEVISION,
@@ -193,6 +194,9 @@
.vmux = TVP5150_SVIDEO,
.amux = 1,
} },
+
+ /* gpio's 4, 1, 0 */
+ .analog_gpio = 0x003d2d,
},
[EM2880_BOARD_TERRATEC_HYBRID_XS] = {
.name = "Terratec Hybrid XS",
@@ -453,8 +457,18 @@
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950:
case EM2880_BOARD_TERRATEC_HYBRID_XS:
- /* reset through GPIO? */
- em28xx_write_regs_req(dev, 0x00, 0x08, "\x7d", 1);
+ em28xx_write_regs(dev, XCLK_REG, "\x27", 1);
+ em28xx_write_regs(dev, I2C_CLK_REG, "\x40", 1);
+ em28xx_write_regs(dev, 0x08, "\xff", 1);
+ em28xx_write_regs(dev, 0x04, "\x00", 1);
+ msleep(100);
+ em28xx_write_regs(dev, 0x04, "\x08", 1);
+ msleep(100);
+ em28xx_write_regs(dev, 0x08, "\xff", 1);
+ msleep(50);
+ em28xx_write_regs(dev, 0x08, "\x2d", 1);
+ msleep(50);
+ em28xx_write_regs(dev, 0x08, "\x3d", 1);
break;
}
}
@@ -469,13 +483,31 @@
switch (command) {
case XC2028_TUNER_RESET:
- /* FIXME: This is device-dependent */
+ {
+ char gpio0, gpio1, gpio4;
+
+ /* GPIO and initialization codes for analog TV */
+ gpio0 = dev->analog_gpio & 0xff;
+ gpio1 = (dev->analog_gpio >> 8) & 0xff;
+ gpio4 = dev->analog_gpio >> 24;
+
dev->em28xx_write_regs_req(dev, 0x00, 0x48, "\x00", 1);
dev->em28xx_write_regs_req(dev, 0x00, 0x12, "\x67", 1);
- msleep(140);
+ if (gpio4) {
+ dev->em28xx_write_regs(dev, 0x04, &gpio4, 1);
+ msleep(140);
+ }
+
+ msleep(6);
+ dev->em28xx_write_regs(dev, 0x08, &gpio0, 1);
+ msleep(10);
+ dev->em28xx_write_regs(dev, 0x08, &gpio1, 1);
+ msleep(5);
+
break;
}
+ }
return rc;
}
@@ -608,6 +640,7 @@
dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
dev->decoder = em28xx_boards[dev->model].decoder;
dev->video_inputs = em28xx_boards[dev->model].vchannels;
+ dev->analog_gpio = em28xx_boards[dev->model].analog_gpio;
if (!em28xx_boards[dev->model].has_tuner)
dev->tuner_type = UNSET;
@@ -643,7 +676,9 @@
if (tv.has_ir)
request_module("ir-kbd-i2c");
#endif
- /* FIXME: Should also retrieve decoder processor type */
+ /* enable audio 12 mhz i2s */
+ em28xx_write_regs(dev, XCLK_REG, "\xa7", 1);
+ msleep(10);
break;
}
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index abde13e..1fb3c23 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -178,12 +178,13 @@
int tuner_type;
/* i2c flags */
- unsigned int is_em2800;
unsigned int tda9887_conf;
+ unsigned int is_em2800:1;
unsigned int has_tuner:1;
unsigned int has_msp34xx:1;
unsigned int mts_firmware:1;
+ unsigned int analog_gpio;
enum em28xx_decoder decoder;
@@ -217,15 +218,16 @@
char name[30]; /* name (including minor) of the device */
int model; /* index in the device_data struct */
int devno; /* marks the number of this device */
- unsigned int is_em2800;
- int video_inputs; /* number of video inputs */
- struct list_head devlist;
+ unsigned int analog_gpio;
+ unsigned int is_em2800:1;
unsigned int has_tuner:1;
unsigned int has_msp34xx:1;
unsigned int has_tda9887:1;
-
unsigned int stream_on:1; /* Locks streams */
+ int video_inputs; /* number of video inputs */
+ struct list_head devlist;
+
u32 i2s_speed; /* I2S speed for audio digital stream */
enum em28xx_decoder decoder;
@@ -351,6 +353,7 @@
#define EM2800_AUDIOSRC_REG 0x08
/* em28xx registers */
+#define I2C_CLK_REG 0x06
#define CHIPID_REG 0x0a
#define USBSUSP_REG 0x0c /* */