PC300too alternative WAN driver
The attached patch adds an alternative driver "pc300too" for PCI WAN
cards PC300/RSV and PC300/X21 made by Cyclades Corp. (now Avocent Corp).
Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 21f76f5..f07aec3 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -235,6 +235,19 @@
comment "Refer to the file README.mlppp, provided by PC300 package."
depends on WAN && HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
+config PC300TOO
+ tristate "Cyclades PC300 RSV/X21 alternative support"
+ depends on HDLC && PCI
+ help
+ Alternative driver for PC300 RSV/X21 PCI cards made by
+ Cyclades, Inc. If you have such a card, say Y here and see
+ <http://www.kernel.org/pub/linux/utils/net/hdlc/>.
+
+ To compile this as a module, choose M here: the module
+ will be called pc300too.
+
+ If unsure, say N here.
+
config N2
tristate "SDL RISCom/N2 support"
depends on HDLC && ISA
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
index 83ec2c8..d61fef3 100644
--- a/drivers/net/wan/Makefile
+++ b/drivers/net/wan/Makefile
@@ -41,6 +41,7 @@
obj-$(CONFIG_C101) += c101.o
obj-$(CONFIG_WANXL) += wanxl.o
obj-$(CONFIG_PCI200SYN) += pci200syn.o
+obj-$(CONFIG_PC300TOO) += pc300too.o
clean-files := wanxlfw.inc
$(obj)/wanxl.o: $(obj)/wanxlfw.inc
diff --git a/drivers/net/wan/pc300too.c b/drivers/net/wan/pc300too.c
new file mode 100644
index 0000000..79b2d54
--- /dev/null
+++ b/drivers/net/wan/pc300too.c
@@ -0,0 +1,565 @@
+/*
+ * Cyclades PC300 synchronous serial card driver for Linux
+ *
+ * Copyright (C) 2000-2007 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>.
+ *
+ * Sources of information:
+ * Hitachi HD64572 SCA-II User's Manual
+ * Cyclades PC300 Linux driver
+ *
+ * This driver currently supports only PC300/RSV (V.24/V.35) and
+ * PC300/X21 cards.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/moduleparam.h>
+#include <linux/netdevice.h>
+#include <linux/hdlc.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include "hd64572.h"
+
+static const char* version = "Cyclades PC300 driver version: 1.17";
+static const char* devname = "PC300";
+
+#undef DEBUG_PKT
+#define DEBUG_RINGS
+
+#define PC300_PLX_SIZE 0x80 /* PLX control window size (128 B) */
+#define PC300_SCA_SIZE 0x400 /* SCA window size (1 KB) */
+#define ALL_PAGES_ALWAYS_MAPPED
+#define NEED_DETECT_RAM
+#define NEED_SCA_MSCI_INTR
+#define MAX_TX_BUFFERS 10
+
+static int pci_clock_freq = 33000000;
+static int use_crystal_clock = 0;
+static unsigned int CLOCK_BASE;
+
+/* Masks to access the init_ctrl PLX register */
+#define PC300_CLKSEL_MASK (0x00000004UL)
+#define PC300_CHMEDIA_MASK(port) (0x00000020UL << ((port) * 3))
+#define PC300_CTYPE_MASK (0x00000800UL)
+
+
+enum { PC300_RSV = 1, PC300_X21, PC300_TE }; /* card types */
+
+/*
+ * PLX PCI9050-1 local configuration and shared runtime registers.
+ * This structure can be used to access 9050 registers (memory mapped).
+ */
+typedef struct {
+ u32 loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */
+ u32 loc_rom_range; /* 10h : Local ROM Range */
+ u32 loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */
+ u32 loc_rom_base; /* 24h : Local ROM Base */
+ u32 loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */
+ u32 rom_bus_descr; /* 38h : ROM Bus Descriptor */
+ u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */
+ u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */
+ u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */
+}plx9050;
+
+
+
+typedef struct port_s {
+ struct net_device *dev;
+ struct card_s *card;
+ spinlock_t lock; /* TX lock */
+ sync_serial_settings settings;
+ int rxpart; /* partial frame received, next frame invalid*/
+ unsigned short encoding;
+ unsigned short parity;
+ unsigned int iface;
+ u16 rxin; /* rx ring buffer 'in' pointer */
+ u16 txin; /* tx ring buffer 'in' and 'last' pointers */
+ u16 txlast;
+ u8 rxs, txs, tmc; /* SCA registers */
+ u8 phy_node; /* physical port # - 0 or 1 */
+}port_t;
+
+
+
+typedef struct card_s {
+ int type; /* RSV, X21, etc. */
+ int n_ports; /* 1 or 2 ports */
+ u8* __iomem rambase; /* buffer memory base (virtual) */
+ u8* __iomem scabase; /* SCA memory base (virtual) */
+ plx9050 __iomem *plxbase; /* PLX registers memory base (virtual) */
+ u32 init_ctrl_value; /* Saved value - 9050 bug workaround */
+ u16 rx_ring_buffers; /* number of buffers in a ring */
+ u16 tx_ring_buffers;
+ u16 buff_offset; /* offset of first buffer of first channel */
+ u8 irq; /* interrupt request level */
+
+ port_t ports[2];
+}card_t;
+
+
+#define sca_in(reg, card) readb(card->scabase + (reg))
+#define sca_out(value, reg, card) writeb(value, card->scabase + (reg))
+#define sca_inw(reg, card) readw(card->scabase + (reg))
+#define sca_outw(value, reg, card) writew(value, card->scabase + (reg))
+#define sca_inl(reg, card) readl(card->scabase + (reg))
+#define sca_outl(value, reg, card) writel(value, card->scabase + (reg))
+
+#define port_to_card(port) (port->card)
+#define log_node(port) (port->phy_node)
+#define phy_node(port) (port->phy_node)
+#define winbase(card) (card->rambase)
+#define get_port(card, port) ((port) < (card)->n_ports ? \
+ (&(card)->ports[port]) : (NULL))
+
+#include "hd6457x.c"
+
+
+static void pc300_set_iface(port_t *port)
+{
+ card_t *card = port->card;
+ u32* init_ctrl = &card->plxbase->init_ctrl;
+ u16 msci = get_msci(port);
+ u8 rxs = port->rxs & CLK_BRG_MASK;
+ u8 txs = port->txs & CLK_BRG_MASK;
+
+ sca_out(EXS_TES1, (phy_node(port) ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS,
+ port_to_card(port));
+ switch(port->settings.clock_type) {
+ case CLOCK_INT:
+ rxs |= CLK_BRG; /* BRG output */
+ txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
+ break;
+
+ case CLOCK_TXINT:
+ rxs |= CLK_LINE; /* RXC input */
+ txs |= CLK_PIN_OUT | CLK_BRG; /* BRG output */
+ break;
+
+ case CLOCK_TXFROMRX:
+ rxs |= CLK_LINE; /* RXC input */
+ txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
+ break;
+
+ default: /* EXTernal clock */
+ rxs |= CLK_LINE; /* RXC input */
+ txs |= CLK_PIN_OUT | CLK_LINE; /* TXC input */
+ break;
+ }
+
+ port->rxs = rxs;
+ port->txs = txs;
+ sca_out(rxs, msci + RXS, card);
+ sca_out(txs, msci + TXS, card);
+ sca_set_port(port);
+
+ if (port->card->type == PC300_RSV) {
+ if (port->iface == IF_IFACE_V35)
+ writel(card->init_ctrl_value |
+ PC300_CHMEDIA_MASK(port->phy_node), init_ctrl);
+ else
+ writel(card->init_ctrl_value &
+ ~PC300_CHMEDIA_MASK(port->phy_node), init_ctrl);
+ }
+}
+
+
+
+static int pc300_open(struct net_device *dev)
+{
+ port_t *port = dev_to_port(dev);
+
+ int result = hdlc_open(dev);
+ if (result)
+ return result;
+
+ sca_open(dev);
+ pc300_set_iface(port);
+ return 0;
+}
+
+
+
+static int pc300_close(struct net_device *dev)
+{
+ sca_close(dev);
+ hdlc_close(dev);
+ return 0;
+}
+
+
+
+static int pc300_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ const size_t size = sizeof(sync_serial_settings);
+ sync_serial_settings new_line;
+ sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
+ int new_type;
+ port_t *port = dev_to_port(dev);
+
+#ifdef DEBUG_RINGS
+ if (cmd == SIOCDEVPRIVATE) {
+ sca_dump_rings(dev);
+ return 0;
+ }
+#endif
+ if (cmd != SIOCWANDEV)
+ return hdlc_ioctl(dev, ifr, cmd);
+
+ if (ifr->ifr_settings.type == IF_GET_IFACE) {
+ ifr->ifr_settings.type = port->iface;
+ if (ifr->ifr_settings.size < size) {
+ ifr->ifr_settings.size = size; /* data size wanted */
+ return -ENOBUFS;
+ }
+ if (copy_to_user(line, &port->settings, size))
+ return -EFAULT;
+ return 0;
+
+ }
+
+ if (port->card->type == PC300_X21 &&
+ (ifr->ifr_settings.type == IF_IFACE_SYNC_SERIAL ||
+ ifr->ifr_settings.type == IF_IFACE_X21))
+ new_type = IF_IFACE_X21;
+
+ else if (port->card->type == PC300_RSV &&
+ (ifr->ifr_settings.type == IF_IFACE_SYNC_SERIAL ||
+ ifr->ifr_settings.type == IF_IFACE_V35))
+ new_type = IF_IFACE_V35;
+
+ else if (port->card->type == PC300_RSV &&
+ ifr->ifr_settings.type == IF_IFACE_V24)
+ new_type = IF_IFACE_V24;
+
+ else
+ return hdlc_ioctl(dev, ifr, cmd);
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (copy_from_user(&new_line, line, size))
+ return -EFAULT;
+
+ if (new_line.clock_type != CLOCK_EXT &&
+ new_line.clock_type != CLOCK_TXFROMRX &&
+ new_line.clock_type != CLOCK_INT &&
+ new_line.clock_type != CLOCK_TXINT)
+ return -EINVAL; /* No such clock setting */
+
+ if (new_line.loopback != 0 && new_line.loopback != 1)
+ return -EINVAL;
+
+ memcpy(&port->settings, &new_line, size); /* Update settings */
+ port->iface = new_type;
+ pc300_set_iface(port);
+ return 0;
+}
+
+
+
+static void pc300_pci_remove_one(struct pci_dev *pdev)
+{
+ int i;
+ card_t *card = pci_get_drvdata(pdev);
+
+ for (i = 0; i < 2; i++)
+ if (card->ports[i].card) {
+ struct net_device *dev = port_to_dev(&card->ports[i]);
+ unregister_hdlc_device(dev);
+ }
+
+ if (card->irq)
+ free_irq(card->irq, card);
+
+ if (card->rambase)
+ iounmap(card->rambase);
+ if (card->scabase)
+ iounmap(card->scabase);
+ if (card->plxbase)
+ iounmap(card->plxbase);
+
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ if (card->ports[0].dev)
+ free_netdev(card->ports[0].dev);
+ if (card->ports[1].dev)
+ free_netdev(card->ports[1].dev);
+ kfree(card);
+}
+
+
+
+static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ card_t *card;
+ u8 rev_id;
+ u32 __iomem *p;
+ int i;
+ u32 ramsize;
+ u32 ramphys; /* buffer memory base */
+ u32 scaphys; /* SCA memory base */
+ u32 plxphys; /* PLX registers memory base */
+
+#ifndef MODULE
+ static int printed_version;
+ if (!printed_version++)
+ printk(KERN_INFO "%s\n", version);
+#endif
+
+ i = pci_enable_device(pdev);
+ if (i)
+ return i;
+
+ i = pci_request_regions(pdev, "PC300");
+ if (i) {
+ pci_disable_device(pdev);
+ return i;
+ }
+
+ card = kmalloc(sizeof(card_t), GFP_KERNEL);
+ if (card == NULL) {
+ printk(KERN_ERR "pc300: unable to allocate memory\n");
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ return -ENOBUFS;
+ }
+ memset(card, 0, sizeof(card_t));
+ pci_set_drvdata(pdev, card);
+
+ if (pdev->device == PCI_DEVICE_ID_PC300_TE_1 ||
+ pdev->device == PCI_DEVICE_ID_PC300_TE_2)
+ card->type = PC300_TE; /* not fully supported */
+ else if (card->init_ctrl_value & PC300_CTYPE_MASK)
+ card->type = PC300_X21;
+ else
+ card->type = PC300_RSV;
+
+ if (pdev->device == PCI_DEVICE_ID_PC300_RX_1 ||
+ pdev->device == PCI_DEVICE_ID_PC300_TE_1)
+ card->n_ports = 1;
+ else
+ card->n_ports = 2;
+
+ for (i = 0; i < card->n_ports; i++)
+ if (!(card->ports[i].dev = alloc_hdlcdev(&card->ports[i]))) {
+ printk(KERN_ERR "pc300: unable to allocate memory\n");
+ pc300_pci_remove_one(pdev);
+ return -ENOMEM;
+ }
+
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
+ if (pci_resource_len(pdev, 0) != PC300_PLX_SIZE ||
+ pci_resource_len(pdev, 2) != PC300_SCA_SIZE ||
+ pci_resource_len(pdev, 3) < 16384) {
+ printk(KERN_ERR "pc300: invalid card EEPROM parameters\n");
+ pc300_pci_remove_one(pdev);
+ return -EFAULT;
+ }
+
+ plxphys = pci_resource_start(pdev,0) & PCI_BASE_ADDRESS_MEM_MASK;
+ card->plxbase = ioremap(plxphys, PC300_PLX_SIZE);
+
+ scaphys = pci_resource_start(pdev,2) & PCI_BASE_ADDRESS_MEM_MASK;
+ card->scabase = ioremap(scaphys, PC300_SCA_SIZE);
+
+ ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK;
+ card->rambase = ioremap(ramphys, pci_resource_len(pdev,3));
+
+ if (card->plxbase == NULL ||
+ card->scabase == NULL ||
+ card->rambase == NULL) {
+ printk(KERN_ERR "pc300: ioremap() failed\n");
+ pc300_pci_remove_one(pdev);
+ }
+
+ /* PLX PCI 9050 workaround for local configuration register read bug */
+ pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, scaphys);
+ card->init_ctrl_value = readl(&((plx9050*)card->scabase)->init_ctrl);
+ pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, plxphys);
+
+ /* Reset PLX */
+ p = &card->plxbase->init_ctrl;
+ writel(card->init_ctrl_value | 0x40000000, p);
+ readl(p); /* Flush the write - do not use sca_flush */
+ udelay(1);
+
+ writel(card->init_ctrl_value, p);
+ readl(p); /* Flush the write - do not use sca_flush */
+ udelay(1);
+
+ /* Reload Config. Registers from EEPROM */
+ writel(card->init_ctrl_value | 0x20000000, p);
+ readl(p); /* Flush the write - do not use sca_flush */
+ udelay(1);
+
+ writel(card->init_ctrl_value, p);
+ readl(p); /* Flush the write - do not use sca_flush */
+ udelay(1);
+
+ ramsize = sca_detect_ram(card, card->rambase,
+ pci_resource_len(pdev, 3));
+
+ if (use_crystal_clock)
+ card->init_ctrl_value &= ~PC300_CLKSEL_MASK;
+ else
+ card->init_ctrl_value |= PC300_CLKSEL_MASK;
+
+ writel(card->init_ctrl_value, &card->plxbase->init_ctrl);
+ /* number of TX + RX buffers for one port */
+ i = ramsize / (card->n_ports * (sizeof(pkt_desc) + HDLC_MAX_MRU));
+ card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
+ card->rx_ring_buffers = i - card->tx_ring_buffers;
+
+ card->buff_offset = card->n_ports * sizeof(pkt_desc) *
+ (card->tx_ring_buffers + card->rx_ring_buffers);
+
+ printk(KERN_INFO "pc300: PC300/%s, %u KB RAM at 0x%x, IRQ%u, "
+ "using %u TX + %u RX packets rings\n",
+ card->type == PC300_X21 ? "X21" :
+ card->type == PC300_TE ? "TE" : "RSV",
+ ramsize / 1024, ramphys, pdev->irq,
+ card->tx_ring_buffers, card->rx_ring_buffers);
+
+ if (card->tx_ring_buffers < 1) {
+ printk(KERN_ERR "pc300: RAM test failed\n");
+ pc300_pci_remove_one(pdev);
+ return -EFAULT;
+ }
+
+ /* Enable interrupts on the PCI bridge, LINTi1 active low */
+ writew(0x0041, &card->plxbase->intr_ctrl_stat);
+
+ /* Allocate IRQ */
+ if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, devname, card)) {
+ printk(KERN_WARNING "pc300: could not allocate IRQ%d.\n",
+ pdev->irq);
+ pc300_pci_remove_one(pdev);
+ return -EBUSY;
+ }
+ card->irq = pdev->irq;
+
+ sca_init(card, 0);
+
+ // COTE not set - allows better TX DMA settings
+ // sca_out(sca_in(PCR, card) | PCR_COTE, PCR, card);
+
+ sca_out(0x10, BTCR, card);
+
+ for (i = 0; i < card->n_ports; i++) {
+ port_t *port = &card->ports[i];
+ struct net_device *dev = port_to_dev(port);
+ hdlc_device *hdlc = dev_to_hdlc(dev);
+ port->phy_node = i;
+
+ spin_lock_init(&port->lock);
+ SET_MODULE_OWNER(dev);
+ dev->irq = card->irq;
+ dev->mem_start = ramphys;
+ dev->mem_end = ramphys + ramsize - 1;
+ dev->tx_queue_len = 50;
+ dev->do_ioctl = pc300_ioctl;
+ dev->open = pc300_open;
+ dev->stop = pc300_close;
+ hdlc->attach = sca_attach;
+ hdlc->xmit = sca_xmit;
+ port->settings.clock_type = CLOCK_EXT;
+ port->card = card;
+ if (card->type == PC300_X21)
+ port->iface = IF_IFACE_X21;
+ else
+ port->iface = IF_IFACE_V35;
+
+ if (register_hdlc_device(dev)) {
+ printk(KERN_ERR "pc300: unable to register hdlc "
+ "device\n");
+ port->card = NULL;
+ pc300_pci_remove_one(pdev);
+ return -ENOBUFS;
+ }
+ sca_init_sync_port(port); /* Set up SCA memory */
+
+ printk(KERN_INFO "%s: PC300 node %d\n",
+ dev->name, port->phy_node);
+ }
+ return 0;
+}
+
+
+
+static struct pci_device_id pc300_pci_tbl[] __devinitdata = {
+ { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_RX_1, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_RX_2, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_TE_1, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_TE_2, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 },
+ { 0, }
+};
+
+
+static struct pci_driver pc300_pci_driver = {
+ name: "PC300",
+ id_table: pc300_pci_tbl,
+ probe: pc300_pci_init_one,
+ remove: pc300_pci_remove_one,
+};
+
+
+static int __init pc300_init_module(void)
+{
+#ifdef MODULE
+ printk(KERN_INFO "%s\n", version);
+#endif
+ if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) {
+ printk(KERN_ERR "pc300: Invalid PCI clock frequency\n");
+ return -EINVAL;
+ }
+ if (use_crystal_clock != 0 && use_crystal_clock != 1) {
+ printk(KERN_ERR "pc300: Invalid 'use_crystal_clock' value\n");
+ return -EINVAL;
+ }
+
+ CLOCK_BASE = use_crystal_clock ? 24576000 : pci_clock_freq;
+
+ return pci_module_init(&pc300_pci_driver);
+}
+
+
+
+static void __exit pc300_cleanup_module(void)
+{
+ pci_unregister_driver(&pc300_pci_driver);
+}
+
+MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
+MODULE_DESCRIPTION("Cyclades PC300 serial port driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(pci, pc300_pci_tbl);
+module_param(pci_clock_freq, int, 0444);
+MODULE_PARM_DESC(pci_clock_freq, "System PCI clock frequency in Hz");
+module_param(use_crystal_clock, int, 0444);
+MODULE_PARM_DESC(use_crystal_clock,
+ "Use 24.576 MHz clock instead of PCI clock");
+module_init(pc300_init_module);
+module_exit(pc300_cleanup_module);