| config DVB_USB |
| tristate "Support for various USB DVB devices" |
| depends on DVB_CORE && USB && I2C |
| depends on HOTPLUG # due to FW_LOADER |
| select FW_LOADER |
| help |
| By enabling this you will be able to choose the various supported |
| USB1.1 and USB2.0 DVB devices. |
| |
| Almost every USB device needs a firmware, please look into |
| <file:Documentation/dvb/README.dvb-usb>. |
| |
| For a complete list of supported USB devices see the LinuxTV DVB Wiki: |
| <http://www.linuxtv.org/wiki/index.php/DVB_USB> |
| |
| Say Y if you own a USB DVB device. |
| |
| config DVB_USB_DEBUG |
| bool "Enable extended debug support for all DVB-USB devices" |
| depends on DVB_USB |
| help |
| Say Y if you want to enable debugging. See modinfo dvb-usb (and the |
| appropriate drivers) for debug levels. |
| |
| config DVB_USB_A800 |
| tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" |
| depends on DVB_USB |
| select DVB_DIB3000MC |
| select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE |
| select DVB_PLL if !DVB_FE_CUSTOMISE |
| help |
| Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. |
| |
| config DVB_USB_DIBUSB_MB |
| tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)" |
| depends on DVB_USB |
| select DVB_PLL if !DVB_FE_CUSTOMISE |
| select DVB_DIB3000MB |
| select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE |
| help |
| Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by |
| DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator. |
| |
| For an up-to-date list of devices supported by this driver, have a look |
| on the Linux-DVB Wiki at www.linuxtv.org. |
| |
| Say Y if you own such a device and want to use it. You should build it as |
| a module. |
| |
| config DVB_USB_DIBUSB_MB_FAULTY |
| bool "Support faulty USB IDs" |
| depends on DVB_USB_DIBUSB_MB |
| help |
| Support for faulty USB IDs due to an invalid EEPROM on some Artec devices. |
| |
| config DVB_USB_DIBUSB_MC |
| tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" |
| depends on DVB_USB |
| select DVB_DIB3000MC |
| select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE |
| help |
| Support for USB2.0 DVB-T receivers based on reference designs made by |
| DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator. |
| |
| For an up-to-date list of devices supported by this driver, have a look |
| on the Linux-DVB Wiki at www.linuxtv.org. |
| |
| Say Y if you own such a device and want to use it. You should build it as |
| a module. |
| |
| config DVB_USB_DIB0700 |
| tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)" |
| depends on DVB_USB |
| select DVB_DIB7000P |
| select DVB_DIB7000M |
| select DVB_DIB3000MC |
| select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE |
| select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE |
| select DVB_TUNER_DIB0070 |
| help |
| Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The |
| USB bridge is also present in devices having the DiB7700 DVB-T-USB |
| silicon. This chip can be found in devices offered by Hauppauge, |
| Avermedia and other big and small companies. |
| |
| For an up-to-date list of devices supported by this driver, have a look |
| on the Linux-DVB Wiki at www.linuxtv.org. |
| |
| Say Y if you own such a device and want to use it. You should build it as |
| a module. |
| |
| config DVB_USB_UMT_010 |
| tristate "HanfTek UMT-010 DVB-T USB2.0 support" |
| depends on DVB_USB |
| select DVB_PLL if !DVB_FE_CUSTOMISE |
| select DVB_DIB3000MC |
| select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE |
| help |
| Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. |
| |
| config DVB_USB_CXUSB |
| tristate "Conexant USB2.0 hybrid reference design support" |
| depends on DVB_USB |
| select DVB_PLL if !DVB_FE_CUSTOMISE |
| select DVB_CX22702 if !DVB_FE_CUSTOMISE |
| select DVB_LGDT330X if !DVB_FE_CUSTOMISE |
| select DVB_MT352 if !DVB_FE_CUSTOMISE |
| select DVB_ZL10353 if !DVB_FE_CUSTOMISE |
| select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE |
| help |
| Say Y here to support the Conexant USB2.0 hybrid reference design. |
| Currently, only DVB and ATSC modes are supported, analog mode |
| shall be added in the future. Devices that require this module: |
| |
| Medion MD95700 hybrid USB2.0 device. |
| DViCO FusionHDTV (Bluebird) USB2.0 devices |
| |
| config DVB_USB_M920X |
| tristate "Uli m920x DVB-T USB2.0 support" |
| depends on DVB_USB |
| select DVB_MT352 if !DVB_FE_CUSTOMISE |
| select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE |
| help |
| Say Y here to support the MSI Mega Sky 580 USB2.0 DVB-T receiver. |
| Currently, only devices with a product id of |
| "DTV USB MINI" (in cold state) are supported. |
| Firmware required. |
| |
| config DVB_USB_GL861 |
| tristate "Genesys Logic GL861 USB2.0 support" |
| depends on DVB_USB |
| select DVB_ZL10353 if !DVB_FE_CUSTOMISE |
| select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE |
| help |
| Say Y here to support the MSI Megasky 580 (55801) DVB-T USB2.0 |
| receiver with USB ID 0db0:5581. |
| |
| config DVB_USB_AU6610 |
| tristate "Alcor Micro AU6610 USB2.0 support" |
| depends on DVB_USB |
| select DVB_ZL10353 if !DVB_FE_CUSTOMISE |
| select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE |
| help |
| Say Y here to support the Sigmatek DVB-110 DVB-T USB2.0 receiver. |
| |
| config DVB_USB_DIGITV |
| tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support" |
| depends on DVB_USB |
| select DVB_PLL if !DVB_FE_CUSTOMISE |
| select DVB_NXT6000 if !DVB_FE_CUSTOMISE |
| select DVB_MT352 if !DVB_FE_CUSTOMISE |
| help |
| Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver. |
| |
| config DVB_USB_VP7045 |
| tristate "TwinhanDTV Alpha/MagicBoxII, DNTV tinyUSB2, Beetle USB2.0 support" |
| depends on DVB_USB |
| help |
| Say Y here to support the |
| |
| TwinhanDTV Alpha (stick) (VP-7045), |
| TwinhanDTV MagicBox II (VP-7046), |
| DigitalNow TinyUSB 2 DVB-t, |
| DigitalRise USB 2.0 Ter (Beetle) and |
| TYPHOON DVB-T USB DRIVE |
| |
| DVB-T USB2.0 receivers. |
| |
| config DVB_USB_VP702X |
| tristate "TwinhanDTV StarBox and clones DVB-S USB2.0 support" |
| depends on DVB_USB |
| help |
| Say Y here to support the |
| |
| TwinhanDTV StarBox, |
| DigitalRise USB Starbox and |
| TYPHOON DVB-S USB 2.0 BOX |
| |
| DVB-S USB2.0 receivers. |
| |
| config DVB_USB_GP8PSK |
| tristate "GENPIX 8PSK->USB module support" |
| depends on DVB_USB |
| help |
| Say Y here to support the |
| GENPIX 8psk module |
| |
| DVB-S USB2.0 receivers. |
| |
| config DVB_USB_NOVA_T_USB2 |
| tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" |
| depends on DVB_USB |
| select DVB_DIB3000MC |
| select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE |
| select DVB_PLL if !DVB_FE_CUSTOMISE |
| help |
| Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. |
| |
| config DVB_USB_TTUSB2 |
| tristate "Pinnacle 400e DVB-S USB2.0 support" |
| depends on DVB_USB |
| select DVB_TDA10086 if !DVB_FE_CUSTOMISE |
| select DVB_LNBP21 if !DVB_FE_CUSTOMISE |
| select DVB_TDA826X if !DVB_FE_CUSTOMISE |
| help |
| Say Y here to support the Pinnacle 400e DVB-S USB2.0 receiver. The |
| firmware protocol used by this module is similar to the one used by the |
| old ttusb-driver - that's why the module is called dvb-usb-ttusb2.ko. |
| |
| config DVB_USB_DTT200U |
| tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)" |
| depends on DVB_USB |
| help |
| Say Y here to support the WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver. |
| |
| The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan). |
| |
| The WT-220U and its clones are pen-sized. |
| |
| config DVB_USB_OPERA1 |
| tristate "Opera1 DVB-S USB2.0 receiver" |
| depends on DVB_USB |
| select DVB_STV0299 if !DVB_FE_CUSTOMISE |
| select DVB_PLL if !DVB_FE_CUSTOMISE |
| help |
| Say Y here to support the Opera DVB-S USB2.0 receiver. |
| |
| config DVB_USB_AF9005 |
| tristate "Afatech AF9005 DVB-T USB1.1 support" |
| depends on DVB_USB && EXPERIMENTAL |
| select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE |
| select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE |
| help |
| Say Y here to support the Afatech AF9005 based DVB-T USB1.1 receiver |
| and the TerraTec Cinergy T USB XE (Rev.1) |
| |
| config DVB_USB_AF9005_REMOTE |
| tristate "Afatech AF9005 default remote control support" |
| depends on DVB_USB_AF9005 |
| help |
| Say Y here to support the default remote control decoding for the |
| Afatech AF9005 based receiver. |
| |