| /* |
| * Copyright (c) 2008-2011 Atheros Communications Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/dma-mapping.h> |
| #include <linux/slab.h> |
| #include <linux/ath9k_platform.h> |
| #include <linux/module.h> |
| #include <linux/relay.h> |
| #include <net/ieee80211_radiotap.h> |
| |
| #include "ath9k.h" |
| |
| struct ath9k_eeprom_ctx { |
| struct completion complete; |
| struct ath_hw *ah; |
| }; |
| |
| static char *dev_info = "ath9k"; |
| |
| MODULE_AUTHOR("Atheros Communications"); |
| MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards."); |
| MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| |
| static unsigned int ath9k_debug = ATH_DBG_DEFAULT; |
| module_param_named(debug, ath9k_debug, uint, 0); |
| MODULE_PARM_DESC(debug, "Debugging mask"); |
| |
| int ath9k_modparam_nohwcrypt; |
| module_param_named(nohwcrypt, ath9k_modparam_nohwcrypt, int, 0444); |
| MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption"); |
| |
| int led_blink; |
| module_param_named(blink, led_blink, int, 0444); |
| MODULE_PARM_DESC(blink, "Enable LED blink on activity"); |
| |
| static int ath9k_btcoex_enable; |
| module_param_named(btcoex_enable, ath9k_btcoex_enable, int, 0444); |
| MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence"); |
| |
| static int ath9k_bt_ant_diversity; |
| module_param_named(bt_ant_diversity, ath9k_bt_ant_diversity, int, 0444); |
| MODULE_PARM_DESC(bt_ant_diversity, "Enable WLAN/BT RX antenna diversity"); |
| |
| bool is_ath9k_unloaded; |
| /* We use the hw_value as an index into our private channel structure */ |
| |
| #define CHAN2G(_freq, _idx) { \ |
| .band = IEEE80211_BAND_2GHZ, \ |
| .center_freq = (_freq), \ |
| .hw_value = (_idx), \ |
| .max_power = 20, \ |
| } |
| |
| #define CHAN5G(_freq, _idx) { \ |
| .band = IEEE80211_BAND_5GHZ, \ |
| .center_freq = (_freq), \ |
| .hw_value = (_idx), \ |
| .max_power = 20, \ |
| } |
| |
| /* Some 2 GHz radios are actually tunable on 2312-2732 |
| * on 5 MHz steps, we support the channels which we know |
| * we have calibration data for all cards though to make |
| * this static */ |
| static const struct ieee80211_channel ath9k_2ghz_chantable[] = { |
| CHAN2G(2412, 0), /* Channel 1 */ |
| CHAN2G(2417, 1), /* Channel 2 */ |
| CHAN2G(2422, 2), /* Channel 3 */ |
| CHAN2G(2427, 3), /* Channel 4 */ |
| CHAN2G(2432, 4), /* Channel 5 */ |
| CHAN2G(2437, 5), /* Channel 6 */ |
| CHAN2G(2442, 6), /* Channel 7 */ |
| CHAN2G(2447, 7), /* Channel 8 */ |
| CHAN2G(2452, 8), /* Channel 9 */ |
| CHAN2G(2457, 9), /* Channel 10 */ |
| CHAN2G(2462, 10), /* Channel 11 */ |
| CHAN2G(2467, 11), /* Channel 12 */ |
| CHAN2G(2472, 12), /* Channel 13 */ |
| CHAN2G(2484, 13), /* Channel 14 */ |
| }; |
| |
| /* Some 5 GHz radios are actually tunable on XXXX-YYYY |
| * on 5 MHz steps, we support the channels which we know |
| * we have calibration data for all cards though to make |
| * this static */ |
| static const struct ieee80211_channel ath9k_5ghz_chantable[] = { |
| /* _We_ call this UNII 1 */ |
| CHAN5G(5180, 14), /* Channel 36 */ |
| CHAN5G(5200, 15), /* Channel 40 */ |
| CHAN5G(5220, 16), /* Channel 44 */ |
| CHAN5G(5240, 17), /* Channel 48 */ |
| /* _We_ call this UNII 2 */ |
| CHAN5G(5260, 18), /* Channel 52 */ |
| CHAN5G(5280, 19), /* Channel 56 */ |
| CHAN5G(5300, 20), /* Channel 60 */ |
| CHAN5G(5320, 21), /* Channel 64 */ |
| /* _We_ call this "Middle band" */ |
| CHAN5G(5500, 22), /* Channel 100 */ |
| CHAN5G(5520, 23), /* Channel 104 */ |
| CHAN5G(5540, 24), /* Channel 108 */ |
| CHAN5G(5560, 25), /* Channel 112 */ |
| CHAN5G(5580, 26), /* Channel 116 */ |
| CHAN5G(5600, 27), /* Channel 120 */ |
| CHAN5G(5620, 28), /* Channel 124 */ |
| CHAN5G(5640, 29), /* Channel 128 */ |
| CHAN5G(5660, 30), /* Channel 132 */ |
| CHAN5G(5680, 31), /* Channel 136 */ |
| CHAN5G(5700, 32), /* Channel 140 */ |
| /* _We_ call this UNII 3 */ |
| CHAN5G(5745, 33), /* Channel 149 */ |
| CHAN5G(5765, 34), /* Channel 153 */ |
| CHAN5G(5785, 35), /* Channel 157 */ |
| CHAN5G(5805, 36), /* Channel 161 */ |
| CHAN5G(5825, 37), /* Channel 165 */ |
| }; |
| |
| /* Atheros hardware rate code addition for short premble */ |
| #define SHPCHECK(__hw_rate, __flags) \ |
| ((__flags & IEEE80211_RATE_SHORT_PREAMBLE) ? (__hw_rate | 0x04 ) : 0) |
| |
| #define RATE(_bitrate, _hw_rate, _flags) { \ |
| .bitrate = (_bitrate), \ |
| .flags = (_flags), \ |
| .hw_value = (_hw_rate), \ |
| .hw_value_short = (SHPCHECK(_hw_rate, _flags)) \ |
| } |
| |
| static struct ieee80211_rate ath9k_legacy_rates[] = { |
| RATE(10, 0x1b, 0), |
| RATE(20, 0x1a, IEEE80211_RATE_SHORT_PREAMBLE), |
| RATE(55, 0x19, IEEE80211_RATE_SHORT_PREAMBLE), |
| RATE(110, 0x18, IEEE80211_RATE_SHORT_PREAMBLE), |
| RATE(60, 0x0b, (IEEE80211_RATE_SUPPORTS_5MHZ | |
| IEEE80211_RATE_SUPPORTS_10MHZ)), |
| RATE(90, 0x0f, (IEEE80211_RATE_SUPPORTS_5MHZ | |
| IEEE80211_RATE_SUPPORTS_10MHZ)), |
| RATE(120, 0x0a, (IEEE80211_RATE_SUPPORTS_5MHZ | |
| IEEE80211_RATE_SUPPORTS_10MHZ)), |
| RATE(180, 0x0e, (IEEE80211_RATE_SUPPORTS_5MHZ | |
| IEEE80211_RATE_SUPPORTS_10MHZ)), |
| RATE(240, 0x09, (IEEE80211_RATE_SUPPORTS_5MHZ | |
| IEEE80211_RATE_SUPPORTS_10MHZ)), |
| RATE(360, 0x0d, (IEEE80211_RATE_SUPPORTS_5MHZ | |
| IEEE80211_RATE_SUPPORTS_10MHZ)), |
| RATE(480, 0x08, (IEEE80211_RATE_SUPPORTS_5MHZ | |
| IEEE80211_RATE_SUPPORTS_10MHZ)), |
| RATE(540, 0x0c, (IEEE80211_RATE_SUPPORTS_5MHZ | |
| IEEE80211_RATE_SUPPORTS_10MHZ)), |
| }; |
| |
| #ifdef CONFIG_MAC80211_LEDS |
| static const struct ieee80211_tpt_blink ath9k_tpt_blink[] = { |
| { .throughput = 0 * 1024, .blink_time = 334 }, |
| { .throughput = 1 * 1024, .blink_time = 260 }, |
| { .throughput = 5 * 1024, .blink_time = 220 }, |
| { .throughput = 10 * 1024, .blink_time = 190 }, |
| { .throughput = 20 * 1024, .blink_time = 170 }, |
| { .throughput = 50 * 1024, .blink_time = 150 }, |
| { .throughput = 70 * 1024, .blink_time = 130 }, |
| { .throughput = 100 * 1024, .blink_time = 110 }, |
| { .throughput = 200 * 1024, .blink_time = 80 }, |
| { .throughput = 300 * 1024, .blink_time = 50 }, |
| }; |
| #endif |
| |
| static void ath9k_deinit_softc(struct ath_softc *sc); |
| |
| /* |
| * Read and write, they both share the same lock. We do this to serialize |
| * reads and writes on Atheros 802.11n PCI devices only. This is required |
| * as the FIFO on these devices can only accept sanely 2 requests. |
| */ |
| |
| static void ath9k_iowrite32(void *hw_priv, u32 val, u32 reg_offset) |
| { |
| struct ath_hw *ah = (struct ath_hw *) hw_priv; |
| struct ath_common *common = ath9k_hw_common(ah); |
| struct ath_softc *sc = (struct ath_softc *) common->priv; |
| |
| if (NR_CPUS > 1 && ah->config.serialize_regmode == SER_REG_MODE_ON) { |
| unsigned long flags; |
| spin_lock_irqsave(&sc->sc_serial_rw, flags); |
| iowrite32(val, sc->mem + reg_offset); |
| spin_unlock_irqrestore(&sc->sc_serial_rw, flags); |
| } else |
| iowrite32(val, sc->mem + reg_offset); |
| } |
| |
| static unsigned int ath9k_ioread32(void *hw_priv, u32 reg_offset) |
| { |
| struct ath_hw *ah = (struct ath_hw *) hw_priv; |
| struct ath_common *common = ath9k_hw_common(ah); |
| struct ath_softc *sc = (struct ath_softc *) common->priv; |
| u32 val; |
| |
| if (NR_CPUS > 1 && ah->config.serialize_regmode == SER_REG_MODE_ON) { |
| unsigned long flags; |
| spin_lock_irqsave(&sc->sc_serial_rw, flags); |
| val = ioread32(sc->mem + reg_offset); |
| spin_unlock_irqrestore(&sc->sc_serial_rw, flags); |
| } else |
| val = ioread32(sc->mem + reg_offset); |
| return val; |
| } |
| |
| static unsigned int __ath9k_reg_rmw(struct ath_softc *sc, u32 reg_offset, |
| u32 set, u32 clr) |
| { |
| u32 val; |
| |
| val = ioread32(sc->mem + reg_offset); |
| val &= ~clr; |
| val |= set; |
| iowrite32(val, sc->mem + reg_offset); |
| |
| return val; |
| } |
| |
| static unsigned int ath9k_reg_rmw(void *hw_priv, u32 reg_offset, u32 set, u32 clr) |
| { |
| struct ath_hw *ah = (struct ath_hw *) hw_priv; |
| struct ath_common *common = ath9k_hw_common(ah); |
| struct ath_softc *sc = (struct ath_softc *) common->priv; |
| unsigned long uninitialized_var(flags); |
| u32 val; |
| |
| if (NR_CPUS > 1 && ah->config.serialize_regmode == SER_REG_MODE_ON) { |
| spin_lock_irqsave(&sc->sc_serial_rw, flags); |
| val = __ath9k_reg_rmw(sc, reg_offset, set, clr); |
| spin_unlock_irqrestore(&sc->sc_serial_rw, flags); |
| } else |
| val = __ath9k_reg_rmw(sc, reg_offset, set, clr); |
| |
| return val; |
| } |
| |
| /**************************/ |
| /* Initialization */ |
| /**************************/ |
| |
| static void setup_ht_cap(struct ath_softc *sc, |
| struct ieee80211_sta_ht_cap *ht_info) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| u8 tx_streams, rx_streams; |
| int i, max_streams; |
| |
| ht_info->ht_supported = true; |
| ht_info->cap = IEEE80211_HT_CAP_SUP_WIDTH_20_40 | |
| IEEE80211_HT_CAP_SM_PS | |
| IEEE80211_HT_CAP_SGI_40 | |
| IEEE80211_HT_CAP_DSSSCCK40; |
| |
| if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_LDPC) |
| ht_info->cap |= IEEE80211_HT_CAP_LDPC_CODING; |
| |
| if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_SGI_20) |
| ht_info->cap |= IEEE80211_HT_CAP_SGI_20; |
| |
| ht_info->ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; |
| ht_info->ampdu_density = IEEE80211_HT_MPDU_DENSITY_8; |
| |
| if (AR_SREV_9330(ah) || AR_SREV_9485(ah) || AR_SREV_9565(ah)) |
| max_streams = 1; |
| else if (AR_SREV_9462(ah)) |
| max_streams = 2; |
| else if (AR_SREV_9300_20_OR_LATER(ah)) |
| max_streams = 3; |
| else |
| max_streams = 2; |
| |
| if (AR_SREV_9280_20_OR_LATER(ah)) { |
| if (max_streams >= 2) |
| ht_info->cap |= IEEE80211_HT_CAP_TX_STBC; |
| ht_info->cap |= (1 << IEEE80211_HT_CAP_RX_STBC_SHIFT); |
| } |
| |
| /* set up supported mcs set */ |
| memset(&ht_info->mcs, 0, sizeof(ht_info->mcs)); |
| tx_streams = ath9k_cmn_count_streams(ah->txchainmask, max_streams); |
| rx_streams = ath9k_cmn_count_streams(ah->rxchainmask, max_streams); |
| |
| ath_dbg(common, CONFIG, "TX streams %d, RX streams: %d\n", |
| tx_streams, rx_streams); |
| |
| if (tx_streams != rx_streams) { |
| ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF; |
| ht_info->mcs.tx_params |= ((tx_streams - 1) << |
| IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); |
| } |
| |
| for (i = 0; i < rx_streams; i++) |
| ht_info->mcs.rx_mask[i] = 0xff; |
| |
| ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED; |
| } |
| |
| static void ath9k_reg_notifier(struct wiphy *wiphy, |
| struct regulatory_request *request) |
| { |
| struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); |
| struct ath_softc *sc = hw->priv; |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_regulatory *reg = ath9k_hw_regulatory(ah); |
| |
| ath_reg_notifier_apply(wiphy, request, reg); |
| |
| /* Set tx power */ |
| if (ah->curchan) { |
| sc->config.txpowlimit = 2 * ah->curchan->chan->max_power; |
| ath9k_ps_wakeup(sc); |
| ath9k_hw_set_txpowerlimit(ah, sc->config.txpowlimit, false); |
| sc->curtxpow = ath9k_hw_regulatory(ah)->power_limit; |
| /* synchronize DFS detector if regulatory domain changed */ |
| if (sc->dfs_detector != NULL) |
| sc->dfs_detector->set_dfs_domain(sc->dfs_detector, |
| request->dfs_region); |
| ath9k_ps_restore(sc); |
| } |
| } |
| |
| /* |
| * This function will allocate both the DMA descriptor structure, and the |
| * buffers it contains. These are used to contain the descriptors used |
| * by the system. |
| */ |
| int ath_descdma_setup(struct ath_softc *sc, struct ath_descdma *dd, |
| struct list_head *head, const char *name, |
| int nbuf, int ndesc, bool is_tx) |
| { |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| u8 *ds; |
| int i, bsize, desc_len; |
| |
| ath_dbg(common, CONFIG, "%s DMA: %u buffers %u desc/buf\n", |
| name, nbuf, ndesc); |
| |
| INIT_LIST_HEAD(head); |
| |
| if (is_tx) |
| desc_len = sc->sc_ah->caps.tx_desc_len; |
| else |
| desc_len = sizeof(struct ath_desc); |
| |
| /* ath_desc must be a multiple of DWORDs */ |
| if ((desc_len % 4) != 0) { |
| ath_err(common, "ath_desc not DWORD aligned\n"); |
| BUG_ON((desc_len % 4) != 0); |
| return -ENOMEM; |
| } |
| |
| dd->dd_desc_len = desc_len * nbuf * ndesc; |
| |
| /* |
| * Need additional DMA memory because we can't use |
| * descriptors that cross the 4K page boundary. Assume |
| * one skipped descriptor per 4K page. |
| */ |
| if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_4KB_SPLITTRANS)) { |
| u32 ndesc_skipped = |
| ATH_DESC_4KB_BOUND_NUM_SKIPPED(dd->dd_desc_len); |
| u32 dma_len; |
| |
| while (ndesc_skipped) { |
| dma_len = ndesc_skipped * desc_len; |
| dd->dd_desc_len += dma_len; |
| |
| ndesc_skipped = ATH_DESC_4KB_BOUND_NUM_SKIPPED(dma_len); |
| } |
| } |
| |
| /* allocate descriptors */ |
| dd->dd_desc = dmam_alloc_coherent(sc->dev, dd->dd_desc_len, |
| &dd->dd_desc_paddr, GFP_KERNEL); |
| if (!dd->dd_desc) |
| return -ENOMEM; |
| |
| ds = (u8 *) dd->dd_desc; |
| ath_dbg(common, CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n", |
| name, ds, (u32) dd->dd_desc_len, |
| ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len); |
| |
| /* allocate buffers */ |
| if (is_tx) { |
| struct ath_buf *bf; |
| |
| bsize = sizeof(struct ath_buf) * nbuf; |
| bf = devm_kzalloc(sc->dev, bsize, GFP_KERNEL); |
| if (!bf) |
| return -ENOMEM; |
| |
| for (i = 0; i < nbuf; i++, bf++, ds += (desc_len * ndesc)) { |
| bf->bf_desc = ds; |
| bf->bf_daddr = DS2PHYS(dd, ds); |
| |
| if (!(sc->sc_ah->caps.hw_caps & |
| ATH9K_HW_CAP_4KB_SPLITTRANS)) { |
| /* |
| * Skip descriptor addresses which can cause 4KB |
| * boundary crossing (addr + length) with a 32 dword |
| * descriptor fetch. |
| */ |
| while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) { |
| BUG_ON((caddr_t) bf->bf_desc >= |
| ((caddr_t) dd->dd_desc + |
| dd->dd_desc_len)); |
| |
| ds += (desc_len * ndesc); |
| bf->bf_desc = ds; |
| bf->bf_daddr = DS2PHYS(dd, ds); |
| } |
| } |
| list_add_tail(&bf->list, head); |
| } |
| } else { |
| struct ath_rxbuf *bf; |
| |
| bsize = sizeof(struct ath_rxbuf) * nbuf; |
| bf = devm_kzalloc(sc->dev, bsize, GFP_KERNEL); |
| if (!bf) |
| return -ENOMEM; |
| |
| for (i = 0; i < nbuf; i++, bf++, ds += (desc_len * ndesc)) { |
| bf->bf_desc = ds; |
| bf->bf_daddr = DS2PHYS(dd, ds); |
| |
| if (!(sc->sc_ah->caps.hw_caps & |
| ATH9K_HW_CAP_4KB_SPLITTRANS)) { |
| /* |
| * Skip descriptor addresses which can cause 4KB |
| * boundary crossing (addr + length) with a 32 dword |
| * descriptor fetch. |
| */ |
| while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) { |
| BUG_ON((caddr_t) bf->bf_desc >= |
| ((caddr_t) dd->dd_desc + |
| dd->dd_desc_len)); |
| |
| ds += (desc_len * ndesc); |
| bf->bf_desc = ds; |
| bf->bf_daddr = DS2PHYS(dd, ds); |
| } |
| } |
| list_add_tail(&bf->list, head); |
| } |
| } |
| return 0; |
| } |
| |
| static int ath9k_init_queues(struct ath_softc *sc) |
| { |
| int i = 0; |
| |
| sc->beacon.beaconq = ath9k_hw_beaconq_setup(sc->sc_ah); |
| sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0); |
| ath_cabq_update(sc); |
| |
| sc->tx.uapsdq = ath_txq_setup(sc, ATH9K_TX_QUEUE_UAPSD, 0); |
| |
| for (i = 0; i < IEEE80211_NUM_ACS; i++) { |
| sc->tx.txq_map[i] = ath_txq_setup(sc, ATH9K_TX_QUEUE_DATA, i); |
| sc->tx.txq_map[i]->mac80211_qnum = i; |
| sc->tx.txq_max_pending[i] = ATH_MAX_QDEPTH; |
| } |
| return 0; |
| } |
| |
| static int ath9k_init_channels_rates(struct ath_softc *sc) |
| { |
| void *channels; |
| |
| BUILD_BUG_ON(ARRAY_SIZE(ath9k_2ghz_chantable) + |
| ARRAY_SIZE(ath9k_5ghz_chantable) != |
| ATH9K_NUM_CHANNELS); |
| |
| if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) { |
| channels = devm_kzalloc(sc->dev, |
| sizeof(ath9k_2ghz_chantable), GFP_KERNEL); |
| if (!channels) |
| return -ENOMEM; |
| |
| memcpy(channels, ath9k_2ghz_chantable, |
| sizeof(ath9k_2ghz_chantable)); |
| sc->sbands[IEEE80211_BAND_2GHZ].channels = channels; |
| sc->sbands[IEEE80211_BAND_2GHZ].band = IEEE80211_BAND_2GHZ; |
| sc->sbands[IEEE80211_BAND_2GHZ].n_channels = |
| ARRAY_SIZE(ath9k_2ghz_chantable); |
| sc->sbands[IEEE80211_BAND_2GHZ].bitrates = ath9k_legacy_rates; |
| sc->sbands[IEEE80211_BAND_2GHZ].n_bitrates = |
| ARRAY_SIZE(ath9k_legacy_rates); |
| } |
| |
| if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ) { |
| channels = devm_kzalloc(sc->dev, |
| sizeof(ath9k_5ghz_chantable), GFP_KERNEL); |
| if (!channels) |
| return -ENOMEM; |
| |
| memcpy(channels, ath9k_5ghz_chantable, |
| sizeof(ath9k_5ghz_chantable)); |
| sc->sbands[IEEE80211_BAND_5GHZ].channels = channels; |
| sc->sbands[IEEE80211_BAND_5GHZ].band = IEEE80211_BAND_5GHZ; |
| sc->sbands[IEEE80211_BAND_5GHZ].n_channels = |
| ARRAY_SIZE(ath9k_5ghz_chantable); |
| sc->sbands[IEEE80211_BAND_5GHZ].bitrates = |
| ath9k_legacy_rates + 4; |
| sc->sbands[IEEE80211_BAND_5GHZ].n_bitrates = |
| ARRAY_SIZE(ath9k_legacy_rates) - 4; |
| } |
| return 0; |
| } |
| |
| static void ath9k_init_misc(struct ath_softc *sc) |
| { |
| struct ath_common *common = ath9k_hw_common(sc->sc_ah); |
| int i = 0; |
| |
| setup_timer(&common->ani.timer, ath_ani_calibrate, (unsigned long)sc); |
| |
| sc->last_rssi = ATH_RSSI_DUMMY_MARKER; |
| sc->config.txpowlimit = ATH_TXPOWER_MAX; |
| memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN); |
| sc->beacon.slottime = ATH9K_SLOT_TIME_9; |
| |
| for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) |
| sc->beacon.bslot[i] = NULL; |
| |
| if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) |
| sc->ant_comb.count = ATH_ANT_DIV_COMB_INIT_COUNT; |
| |
| sc->spec_config.enabled = 0; |
| sc->spec_config.short_repeat = true; |
| sc->spec_config.count = 8; |
| sc->spec_config.endless = false; |
| sc->spec_config.period = 0xFF; |
| sc->spec_config.fft_period = 0xF; |
| } |
| |
| static void ath9k_init_pcoem_platform(struct ath_softc *sc) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath9k_hw_capabilities *pCap = &ah->caps; |
| struct ath_common *common = ath9k_hw_common(ah); |
| |
| if (common->bus_ops->ath_bus_type != ATH_PCI) |
| return; |
| |
| if (sc->driver_data & (ATH9K_PCI_CUS198 | |
| ATH9K_PCI_CUS230)) { |
| ah->config.xlna_gpio = 9; |
| ah->config.xatten_margin_cfg = true; |
| ah->config.alt_mingainidx = true; |
| ah->config.ant_ctrl_comm2g_switch_enable = 0x000BBB88; |
| sc->ant_comb.low_rssi_thresh = 20; |
| sc->ant_comb.fast_div_bias = 3; |
| |
| ath_info(common, "Set parameters for %s\n", |
| (sc->driver_data & ATH9K_PCI_CUS198) ? |
| "CUS198" : "CUS230"); |
| } |
| |
| if (sc->driver_data & ATH9K_PCI_CUS217) |
| ath_info(common, "CUS217 card detected\n"); |
| |
| if (sc->driver_data & ATH9K_PCI_CUS252) |
| ath_info(common, "CUS252 card detected\n"); |
| |
| if (sc->driver_data & ATH9K_PCI_AR9565_1ANT) |
| ath_info(common, "WB335 1-ANT card detected\n"); |
| |
| if (sc->driver_data & ATH9K_PCI_AR9565_2ANT) |
| ath_info(common, "WB335 2-ANT card detected\n"); |
| |
| if (sc->driver_data & ATH9K_PCI_KILLER) |
| ath_info(common, "Killer Wireless card detected\n"); |
| |
| /* |
| * Some WB335 cards do not support antenna diversity. Since |
| * we use a hardcoded value for AR9565 instead of using the |
| * EEPROM/OTP data, remove the combining feature from |
| * the HW capabilities bitmap. |
| */ |
| if (sc->driver_data & (ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_AR9565_2ANT)) { |
| if (!(sc->driver_data & ATH9K_PCI_BT_ANT_DIV)) |
| pCap->hw_caps &= ~ATH9K_HW_CAP_ANT_DIV_COMB; |
| } |
| |
| if (sc->driver_data & ATH9K_PCI_BT_ANT_DIV) { |
| pCap->hw_caps |= ATH9K_HW_CAP_BT_ANT_DIV; |
| ath_info(common, "Set BT/WLAN RX diversity capability\n"); |
| } |
| |
| if (sc->driver_data & ATH9K_PCI_D3_L1_WAR) { |
| ah->config.pcie_waen = 0x0040473b; |
| ath_info(common, "Enable WAR for ASPM D3/L1\n"); |
| } |
| |
| if (sc->driver_data & ATH9K_PCI_NO_PLL_PWRSAVE) { |
| ah->config.no_pll_pwrsave = true; |
| ath_info(common, "Disable PLL PowerSave\n"); |
| } |
| } |
| |
| static void ath9k_eeprom_request_cb(const struct firmware *eeprom_blob, |
| void *ctx) |
| { |
| struct ath9k_eeprom_ctx *ec = ctx; |
| |
| if (eeprom_blob) |
| ec->ah->eeprom_blob = eeprom_blob; |
| |
| complete(&ec->complete); |
| } |
| |
| static int ath9k_eeprom_request(struct ath_softc *sc, const char *name) |
| { |
| struct ath9k_eeprom_ctx ec; |
| struct ath_hw *ah = ah = sc->sc_ah; |
| int err; |
| |
| /* try to load the EEPROM content asynchronously */ |
| init_completion(&ec.complete); |
| ec.ah = sc->sc_ah; |
| |
| err = request_firmware_nowait(THIS_MODULE, 1, name, sc->dev, GFP_KERNEL, |
| &ec, ath9k_eeprom_request_cb); |
| if (err < 0) { |
| ath_err(ath9k_hw_common(ah), |
| "EEPROM request failed\n"); |
| return err; |
| } |
| |
| wait_for_completion(&ec.complete); |
| |
| if (!ah->eeprom_blob) { |
| ath_err(ath9k_hw_common(ah), |
| "Unable to load EEPROM file %s\n", name); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void ath9k_eeprom_release(struct ath_softc *sc) |
| { |
| release_firmware(sc->sc_ah->eeprom_blob); |
| } |
| |
| static int ath9k_init_soc_platform(struct ath_softc *sc) |
| { |
| struct ath9k_platform_data *pdata = sc->dev->platform_data; |
| struct ath_hw *ah = sc->sc_ah; |
| int ret = 0; |
| |
| if (!pdata) |
| return 0; |
| |
| if (pdata->eeprom_name) { |
| ret = ath9k_eeprom_request(sc, pdata->eeprom_name); |
| if (ret) |
| return ret; |
| } |
| |
| if (pdata->tx_gain_buffalo) |
| ah->config.tx_gain_buffalo = true; |
| |
| return ret; |
| } |
| |
| static int ath9k_init_softc(u16 devid, struct ath_softc *sc, |
| const struct ath_bus_ops *bus_ops) |
| { |
| struct ath9k_platform_data *pdata = sc->dev->platform_data; |
| struct ath_hw *ah = NULL; |
| struct ath9k_hw_capabilities *pCap; |
| struct ath_common *common; |
| int ret = 0, i; |
| int csz = 0; |
| |
| ah = devm_kzalloc(sc->dev, sizeof(struct ath_hw), GFP_KERNEL); |
| if (!ah) |
| return -ENOMEM; |
| |
| ah->dev = sc->dev; |
| ah->hw = sc->hw; |
| ah->hw_version.devid = devid; |
| ah->reg_ops.read = ath9k_ioread32; |
| ah->reg_ops.write = ath9k_iowrite32; |
| ah->reg_ops.rmw = ath9k_reg_rmw; |
| sc->sc_ah = ah; |
| pCap = &ah->caps; |
| |
| common = ath9k_hw_common(ah); |
| sc->dfs_detector = dfs_pattern_detector_init(common, NL80211_DFS_UNSET); |
| sc->tx99_power = MAX_RATE_POWER + 1; |
| init_waitqueue_head(&sc->tx_wait); |
| |
| if (!pdata) { |
| ah->ah_flags |= AH_USE_EEPROM; |
| sc->sc_ah->led_pin = -1; |
| } else { |
| sc->sc_ah->gpio_mask = pdata->gpio_mask; |
| sc->sc_ah->gpio_val = pdata->gpio_val; |
| sc->sc_ah->led_pin = pdata->led_pin; |
| ah->is_clk_25mhz = pdata->is_clk_25mhz; |
| ah->get_mac_revision = pdata->get_mac_revision; |
| ah->external_reset = pdata->external_reset; |
| } |
| |
| common->ops = &ah->reg_ops; |
| common->bus_ops = bus_ops; |
| common->ah = ah; |
| common->hw = sc->hw; |
| common->priv = sc; |
| common->debug_mask = ath9k_debug; |
| common->btcoex_enabled = ath9k_btcoex_enable == 1; |
| common->disable_ani = false; |
| |
| /* |
| * Platform quirks. |
| */ |
| ath9k_init_pcoem_platform(sc); |
| |
| ret = ath9k_init_soc_platform(sc); |
| if (ret) |
| return ret; |
| |
| /* |
| * Enable WLAN/BT RX Antenna diversity only when: |
| * |
| * - BTCOEX is disabled. |
| * - the user manually requests the feature. |
| * - the HW cap is set using the platform data. |
| */ |
| if (!common->btcoex_enabled && ath9k_bt_ant_diversity && |
| (pCap->hw_caps & ATH9K_HW_CAP_BT_ANT_DIV)) |
| common->bt_ant_diversity = 1; |
| |
| spin_lock_init(&common->cc_lock); |
| spin_lock_init(&sc->sc_serial_rw); |
| spin_lock_init(&sc->sc_pm_lock); |
| mutex_init(&sc->mutex); |
| tasklet_init(&sc->intr_tq, ath9k_tasklet, (unsigned long)sc); |
| tasklet_init(&sc->bcon_tasklet, ath9k_beacon_tasklet, |
| (unsigned long)sc); |
| |
| setup_timer(&sc->sleep_timer, ath_ps_full_sleep, (unsigned long)sc); |
| INIT_WORK(&sc->hw_reset_work, ath_reset_work); |
| INIT_WORK(&sc->paprd_work, ath_paprd_calibrate); |
| INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work); |
| |
| /* |
| * Cache line size is used to size and align various |
| * structures used to communicate with the hardware. |
| */ |
| ath_read_cachesize(common, &csz); |
| common->cachelsz = csz << 2; /* convert to bytes */ |
| |
| /* Initializes the hardware for all supported chipsets */ |
| ret = ath9k_hw_init(ah); |
| if (ret) |
| goto err_hw; |
| |
| if (pdata && pdata->macaddr) |
| memcpy(common->macaddr, pdata->macaddr, ETH_ALEN); |
| |
| ret = ath9k_init_queues(sc); |
| if (ret) |
| goto err_queues; |
| |
| ret = ath9k_init_btcoex(sc); |
| if (ret) |
| goto err_btcoex; |
| |
| ret = ath9k_init_channels_rates(sc); |
| if (ret) |
| goto err_btcoex; |
| |
| ath9k_cmn_init_crypto(sc->sc_ah); |
| ath9k_init_misc(sc); |
| ath_fill_led_pin(sc); |
| |
| if (common->bus_ops->aspm_init) |
| common->bus_ops->aspm_init(common); |
| |
| return 0; |
| |
| err_btcoex: |
| for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) |
| if (ATH_TXQ_SETUP(sc, i)) |
| ath_tx_cleanupq(sc, &sc->tx.txq[i]); |
| err_queues: |
| ath9k_hw_deinit(ah); |
| err_hw: |
| ath9k_eeprom_release(sc); |
| dev_kfree_skb_any(sc->tx99_skb); |
| return ret; |
| } |
| |
| static void ath9k_init_band_txpower(struct ath_softc *sc, int band) |
| { |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_channel *chan; |
| struct ath_hw *ah = sc->sc_ah; |
| struct cfg80211_chan_def chandef; |
| int i; |
| |
| sband = &sc->sbands[band]; |
| for (i = 0; i < sband->n_channels; i++) { |
| chan = &sband->channels[i]; |
| ah->curchan = &ah->channels[chan->hw_value]; |
| cfg80211_chandef_create(&chandef, chan, NL80211_CHAN_HT20); |
| ath9k_cmn_get_channel(sc->hw, ah, &chandef); |
| ath9k_hw_set_txpowerlimit(ah, MAX_RATE_POWER, true); |
| } |
| } |
| |
| static void ath9k_init_txpower_limits(struct ath_softc *sc) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath9k_channel *curchan = ah->curchan; |
| |
| if (ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) |
| ath9k_init_band_txpower(sc, IEEE80211_BAND_2GHZ); |
| if (ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ) |
| ath9k_init_band_txpower(sc, IEEE80211_BAND_5GHZ); |
| |
| ah->curchan = curchan; |
| } |
| |
| void ath9k_reload_chainmask_settings(struct ath_softc *sc) |
| { |
| if (!(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT)) |
| return; |
| |
| if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) |
| setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap); |
| if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ) |
| setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap); |
| } |
| |
| static const struct ieee80211_iface_limit if_limits[] = { |
| { .max = 2048, .types = BIT(NL80211_IFTYPE_STATION) | |
| BIT(NL80211_IFTYPE_P2P_CLIENT) | |
| BIT(NL80211_IFTYPE_WDS) }, |
| { .max = 8, .types = |
| #ifdef CONFIG_MAC80211_MESH |
| BIT(NL80211_IFTYPE_MESH_POINT) | |
| #endif |
| BIT(NL80211_IFTYPE_AP) | |
| BIT(NL80211_IFTYPE_P2P_GO) }, |
| }; |
| |
| static const struct ieee80211_iface_limit if_dfs_limits[] = { |
| { .max = 1, .types = BIT(NL80211_IFTYPE_AP) | |
| #ifdef CONFIG_MAC80211_MESH |
| BIT(NL80211_IFTYPE_MESH_POINT) | |
| #endif |
| BIT(NL80211_IFTYPE_ADHOC) }, |
| }; |
| |
| static const struct ieee80211_iface_combination if_comb[] = { |
| { |
| .limits = if_limits, |
| .n_limits = ARRAY_SIZE(if_limits), |
| .max_interfaces = 2048, |
| .num_different_channels = 1, |
| .beacon_int_infra_match = true, |
| }, |
| { |
| .limits = if_dfs_limits, |
| .n_limits = ARRAY_SIZE(if_dfs_limits), |
| .max_interfaces = 1, |
| .num_different_channels = 1, |
| .beacon_int_infra_match = true, |
| .radar_detect_widths = BIT(NL80211_CHAN_WIDTH_20_NOHT) | |
| BIT(NL80211_CHAN_WIDTH_20), |
| } |
| }; |
| |
| static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) |
| { |
| struct ath_hw *ah = sc->sc_ah; |
| struct ath_common *common = ath9k_hw_common(ah); |
| |
| hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | |
| IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | |
| IEEE80211_HW_SIGNAL_DBM | |
| IEEE80211_HW_SUPPORTS_PS | |
| IEEE80211_HW_PS_NULLFUNC_STACK | |
| IEEE80211_HW_SPECTRUM_MGMT | |
| IEEE80211_HW_REPORTS_TX_ACK_STATUS | |
| IEEE80211_HW_SUPPORTS_RC_TABLE | |
| IEEE80211_HW_SUPPORTS_HT_CCK_RATES; |
| |
| if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) { |
| hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION; |
| |
| if (AR_SREV_9280_20_OR_LATER(ah)) |
| hw->radiotap_mcs_details |= |
| IEEE80211_RADIOTAP_MCS_HAVE_STBC; |
| } |
| |
| if (AR_SREV_9160_10_OR_LATER(sc->sc_ah) || ath9k_modparam_nohwcrypt) |
| hw->flags |= IEEE80211_HW_MFP_CAPABLE; |
| |
| hw->wiphy->features |= NL80211_FEATURE_ACTIVE_MONITOR; |
| |
| if (!config_enabled(CONFIG_ATH9K_TX99)) { |
| hw->wiphy->interface_modes = |
| BIT(NL80211_IFTYPE_P2P_GO) | |
| BIT(NL80211_IFTYPE_P2P_CLIENT) | |
| BIT(NL80211_IFTYPE_AP) | |
| BIT(NL80211_IFTYPE_WDS) | |
| BIT(NL80211_IFTYPE_STATION) | |
| BIT(NL80211_IFTYPE_ADHOC) | |
| BIT(NL80211_IFTYPE_MESH_POINT); |
| hw->wiphy->iface_combinations = if_comb; |
| hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb); |
| } |
| |
| hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; |
| |
| hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; |
| hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS; |
| hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; |
| hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_5_10_MHZ; |
| hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH; |
| |
| hw->queues = 4; |
| hw->max_rates = 4; |
| hw->max_listen_interval = 1; |
| hw->max_rate_tries = 10; |
| hw->sta_data_size = sizeof(struct ath_node); |
| hw->vif_data_size = sizeof(struct ath_vif); |
| |
| hw->wiphy->available_antennas_rx = BIT(ah->caps.max_rxchains) - 1; |
| hw->wiphy->available_antennas_tx = BIT(ah->caps.max_txchains) - 1; |
| |
| /* single chain devices with rx diversity */ |
| if (ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) |
| hw->wiphy->available_antennas_rx = BIT(0) | BIT(1); |
| |
| sc->ant_rx = hw->wiphy->available_antennas_rx; |
| sc->ant_tx = hw->wiphy->available_antennas_tx; |
| |
| if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_2GHZ) |
| hw->wiphy->bands[IEEE80211_BAND_2GHZ] = |
| &sc->sbands[IEEE80211_BAND_2GHZ]; |
| if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_5GHZ) |
| hw->wiphy->bands[IEEE80211_BAND_5GHZ] = |
| &sc->sbands[IEEE80211_BAND_5GHZ]; |
| |
| ath9k_init_wow(hw); |
| ath9k_reload_chainmask_settings(sc); |
| |
| SET_IEEE80211_PERM_ADDR(hw, common->macaddr); |
| } |
| |
| int ath9k_init_device(u16 devid, struct ath_softc *sc, |
| const struct ath_bus_ops *bus_ops) |
| { |
| struct ieee80211_hw *hw = sc->hw; |
| struct ath_common *common; |
| struct ath_hw *ah; |
| int error = 0; |
| struct ath_regulatory *reg; |
| |
| /* Bring up device */ |
| error = ath9k_init_softc(devid, sc, bus_ops); |
| if (error) |
| return error; |
| |
| ah = sc->sc_ah; |
| common = ath9k_hw_common(ah); |
| ath9k_set_hw_capab(sc, hw); |
| |
| /* Initialize regulatory */ |
| error = ath_regd_init(&common->regulatory, sc->hw->wiphy, |
| ath9k_reg_notifier); |
| if (error) |
| goto deinit; |
| |
| reg = &common->regulatory; |
| |
| /* Setup TX DMA */ |
| error = ath_tx_init(sc, ATH_TXBUF); |
| if (error != 0) |
| goto deinit; |
| |
| /* Setup RX DMA */ |
| error = ath_rx_init(sc, ATH_RXBUF); |
| if (error != 0) |
| goto deinit; |
| |
| ath9k_init_txpower_limits(sc); |
| |
| #ifdef CONFIG_MAC80211_LEDS |
| /* must be initialized before ieee80211_register_hw */ |
| sc->led_cdev.default_trigger = ieee80211_create_tpt_led_trigger(sc->hw, |
| IEEE80211_TPT_LEDTRIG_FL_RADIO, ath9k_tpt_blink, |
| ARRAY_SIZE(ath9k_tpt_blink)); |
| #endif |
| |
| /* Register with mac80211 */ |
| error = ieee80211_register_hw(hw); |
| if (error) |
| goto rx_cleanup; |
| |
| error = ath9k_init_debug(ah); |
| if (error) { |
| ath_err(common, "Unable to create debugfs files\n"); |
| goto unregister; |
| } |
| |
| /* Handle world regulatory */ |
| if (!ath_is_world_regd(reg)) { |
| error = regulatory_hint(hw->wiphy, reg->alpha2); |
| if (error) |
| goto debug_cleanup; |
| } |
| |
| ath_init_leds(sc); |
| ath_start_rfkill_poll(sc); |
| |
| return 0; |
| |
| debug_cleanup: |
| ath9k_deinit_debug(sc); |
| unregister: |
| ieee80211_unregister_hw(hw); |
| rx_cleanup: |
| ath_rx_cleanup(sc); |
| deinit: |
| ath9k_deinit_softc(sc); |
| return error; |
| } |
| |
| /*****************************/ |
| /* De-Initialization */ |
| /*****************************/ |
| |
| static void ath9k_deinit_softc(struct ath_softc *sc) |
| { |
| int i = 0; |
| |
| ath9k_deinit_btcoex(sc); |
| |
| for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) |
| if (ATH_TXQ_SETUP(sc, i)) |
| ath_tx_cleanupq(sc, &sc->tx.txq[i]); |
| |
| del_timer_sync(&sc->sleep_timer); |
| ath9k_hw_deinit(sc->sc_ah); |
| if (sc->dfs_detector != NULL) |
| sc->dfs_detector->exit(sc->dfs_detector); |
| |
| ath9k_eeprom_release(sc); |
| } |
| |
| void ath9k_deinit_device(struct ath_softc *sc) |
| { |
| struct ieee80211_hw *hw = sc->hw; |
| |
| ath9k_ps_wakeup(sc); |
| |
| wiphy_rfkill_stop_polling(sc->hw->wiphy); |
| ath_deinit_leds(sc); |
| |
| ath9k_ps_restore(sc); |
| |
| ath9k_deinit_debug(sc); |
| ieee80211_unregister_hw(hw); |
| ath_rx_cleanup(sc); |
| ath9k_deinit_softc(sc); |
| } |
| |
| /************************/ |
| /* Module Hooks */ |
| /************************/ |
| |
| static int __init ath9k_init(void) |
| { |
| int error; |
| |
| /* Register rate control algorithm */ |
| error = ath_rate_control_register(); |
| if (error != 0) { |
| pr_err("Unable to register rate control algorithm: %d\n", |
| error); |
| goto err_out; |
| } |
| |
| error = ath_pci_init(); |
| if (error < 0) { |
| pr_err("No PCI devices found, driver not installed\n"); |
| error = -ENODEV; |
| goto err_rate_unregister; |
| } |
| |
| error = ath_ahb_init(); |
| if (error < 0) { |
| error = -ENODEV; |
| goto err_pci_exit; |
| } |
| |
| return 0; |
| |
| err_pci_exit: |
| ath_pci_exit(); |
| |
| err_rate_unregister: |
| ath_rate_control_unregister(); |
| err_out: |
| return error; |
| } |
| module_init(ath9k_init); |
| |
| static void __exit ath9k_exit(void) |
| { |
| is_ath9k_unloaded = true; |
| ath_ahb_exit(); |
| ath_pci_exit(); |
| ath_rate_control_unregister(); |
| pr_info("%s: Driver unloaded\n", dev_info); |
| } |
| module_exit(ath9k_exit); |