PM: Acquire device locks on suspend
This patch reorganizes the way suspend and resume notifications are
sent to drivers. The major changes are that now the PM core acquires
every device semaphore before calling the methods, and calls to
device_add() during suspends will fail, while calls to device_del()
during suspends will block.
It also provides a way to safely remove a suspended device with the
help of the PM core, by using the device_pm_schedule_removal() callback
introduced specifically for this purpose, and updates two drivers (msr
and cpuid) that need to use it.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 691ffb6..200ed5f 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -24,20 +24,45 @@
#include <linux/mutex.h>
#include <linux/pm.h>
#include <linux/resume-trace.h>
+#include <linux/rwsem.h>
#include "../base.h"
#include "power.h"
+/*
+ * The entries in the dpm_active list are in a depth first order, simply
+ * because children are guaranteed to be discovered after parents, and
+ * are inserted at the back of the list on discovery.
+ *
+ * All the other lists are kept in the same order, for consistency.
+ * However the lists aren't always traversed in the same order.
+ * Semaphores must be acquired from the top (i.e., front) down
+ * and released in the opposite order. Devices must be suspended
+ * from the bottom (i.e., end) up and resumed in the opposite order.
+ * That way no parent will be suspended while it still has an active
+ * child.
+ *
+ * Since device_pm_add() may be called with a device semaphore held,
+ * we must never try to acquire a device semaphore while holding
+ * dpm_list_mutex.
+ */
+
LIST_HEAD(dpm_active);
+static LIST_HEAD(dpm_locked);
static LIST_HEAD(dpm_off);
static LIST_HEAD(dpm_off_irq);
+static LIST_HEAD(dpm_destroy);
-static DEFINE_MUTEX(dpm_mtx);
static DEFINE_MUTEX(dpm_list_mtx);
+static DECLARE_RWSEM(pm_sleep_rwsem);
+
int (*platform_enable_wakeup)(struct device *dev, int is_on);
-
+/**
+ * device_pm_add - add a device to the list of active devices
+ * @dev: Device to be added to the list
+ */
void device_pm_add(struct device *dev)
{
pr_debug("PM: Adding info for %s:%s\n",
@@ -48,8 +73,36 @@
mutex_unlock(&dpm_list_mtx);
}
+/**
+ * device_pm_remove - remove a device from the list of active devices
+ * @dev: Device to be removed from the list
+ *
+ * This function also removes the device's PM-related sysfs attributes.
+ */
void device_pm_remove(struct device *dev)
{
+ /*
+ * If this function is called during a suspend, it will be blocked,
+ * because we're holding the device's semaphore at that time, which may
+ * lead to a deadlock. In that case we want to print a warning.
+ * However, it may also be called by unregister_dropped_devices() with
+ * the device's semaphore released, in which case the warning should
+ * not be printed.
+ */
+ if (down_trylock(&dev->sem)) {
+ if (down_read_trylock(&pm_sleep_rwsem)) {
+ /* No suspend in progress, wait on dev->sem */
+ down(&dev->sem);
+ up_read(&pm_sleep_rwsem);
+ } else {
+ /* Suspend in progress, we may deadlock */
+ dev_warn(dev, "Suspicious %s during suspend\n",
+ __FUNCTION__);
+ dump_stack();
+ /* The user has been warned ... */
+ down(&dev->sem);
+ }
+ }
pr_debug("PM: Removing info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus",
kobject_name(&dev->kobj));
@@ -57,25 +110,124 @@
dpm_sysfs_remove(dev);
list_del_init(&dev->power.entry);
mutex_unlock(&dpm_list_mtx);
+ up(&dev->sem);
+}
+
+/**
+ * device_pm_schedule_removal - schedule the removal of a suspended device
+ * @dev: Device to destroy
+ *
+ * Moves the device to the dpm_destroy list for further processing by
+ * unregister_dropped_devices().
+ */
+void device_pm_schedule_removal(struct device *dev)
+{
+ pr_debug("PM: Preparing for removal: %s:%s\n",
+ dev->bus ? dev->bus->name : "No Bus",
+ kobject_name(&dev->kobj));
+ mutex_lock(&dpm_list_mtx);
+ list_move_tail(&dev->power.entry, &dpm_destroy);
+ mutex_unlock(&dpm_list_mtx);
+}
+
+/**
+ * pm_sleep_lock - mutual exclusion for registration and suspend
+ *
+ * Returns 0 if no suspend is underway and device registration
+ * may proceed, otherwise -EBUSY.
+ */
+int pm_sleep_lock(void)
+{
+ if (down_read_trylock(&pm_sleep_rwsem))
+ return 0;
+
+ return -EBUSY;
+}
+
+/**
+ * pm_sleep_unlock - mutual exclusion for registration and suspend
+ *
+ * This routine undoes the effect of device_pm_add_lock
+ * when a device's registration is complete.
+ */
+void pm_sleep_unlock(void)
+{
+ up_read(&pm_sleep_rwsem);
}
/*------------------------- Resume routines -------------------------*/
/**
- * resume_device - Restore state for one device.
+ * resume_device_early - Power on one device (early resume).
* @dev: Device.
*
+ * Must be called with interrupts disabled.
*/
-
-static int resume_device(struct device * dev)
+static int resume_device_early(struct device *dev)
{
int error = 0;
TRACE_DEVICE(dev);
TRACE_RESUME(0);
- down(&dev->sem);
+ if (dev->bus && dev->bus->resume_early) {
+ dev_dbg(dev, "EARLY resume\n");
+ error = dev->bus->resume_early(dev);
+ }
+
+ TRACE_RESUME(error);
+ return error;
+}
+
+/**
+ * dpm_power_up - Power on all regular (non-sysdev) devices.
+ *
+ * Walk the dpm_off_irq list and power each device up. This
+ * is used for devices that required they be powered down with
+ * interrupts disabled. As devices are powered on, they are moved
+ * to the dpm_off list.
+ *
+ * Must be called with interrupts disabled and only one CPU running.
+ */
+static void dpm_power_up(void)
+{
+
+ while (!list_empty(&dpm_off_irq)) {
+ struct list_head *entry = dpm_off_irq.next;
+ struct device *dev = to_device(entry);
+
+ list_move_tail(entry, &dpm_off);
+ resume_device_early(dev);
+ }
+}
+
+/**
+ * device_power_up - Turn on all devices that need special attention.
+ *
+ * Power on system devices, then devices that required we shut them down
+ * with interrupts disabled.
+ *
+ * Must be called with interrupts disabled.
+ */
+void device_power_up(void)
+{
+ sysdev_resume();
+ dpm_power_up();
+}
+EXPORT_SYMBOL_GPL(device_power_up);
+
+/**
+ * resume_device - Restore state for one device.
+ * @dev: Device.
+ *
+ */
+static int resume_device(struct device *dev)
+{
+ int error = 0;
+
+ TRACE_DEVICE(dev);
+ TRACE_RESUME(0);
if (dev->bus && dev->bus->resume) {
dev_dbg(dev,"resuming\n");
@@ -92,126 +244,94 @@
error = dev->class->resume(dev);
}
- up(&dev->sem);
-
TRACE_RESUME(error);
return error;
}
-
-static int resume_device_early(struct device * dev)
-{
- int error = 0;
-
- TRACE_DEVICE(dev);
- TRACE_RESUME(0);
- if (dev->bus && dev->bus->resume_early) {
- dev_dbg(dev,"EARLY resume\n");
- error = dev->bus->resume_early(dev);
- }
- TRACE_RESUME(error);
- return error;
-}
-
-/*
- * Resume the devices that have either not gone through
- * the late suspend, or that did go through it but also
- * went through the early resume
+/**
+ * dpm_resume - Resume every device.
+ *
+ * Resume the devices that have either not gone through
+ * the late suspend, or that did go through it but also
+ * went through the early resume.
+ *
+ * Take devices from the dpm_off_list, resume them,
+ * and put them on the dpm_locked list.
*/
static void dpm_resume(void)
{
mutex_lock(&dpm_list_mtx);
while(!list_empty(&dpm_off)) {
- struct list_head * entry = dpm_off.next;
- struct device * dev = to_device(entry);
+ struct list_head *entry = dpm_off.next;
+ struct device *dev = to_device(entry);
- get_device(dev);
- list_move_tail(entry, &dpm_active);
-
+ list_move_tail(entry, &dpm_locked);
mutex_unlock(&dpm_list_mtx);
resume_device(dev);
mutex_lock(&dpm_list_mtx);
- put_device(dev);
}
mutex_unlock(&dpm_list_mtx);
}
+/**
+ * unlock_all_devices - Release each device's semaphore
+ *
+ * Go through the dpm_off list. Put each device on the dpm_active
+ * list and unlock it.
+ */
+static void unlock_all_devices(void)
+{
+ mutex_lock(&dpm_list_mtx);
+ while (!list_empty(&dpm_locked)) {
+ struct list_head *entry = dpm_locked.prev;
+ struct device *dev = to_device(entry);
+
+ list_move(entry, &dpm_active);
+ up(&dev->sem);
+ }
+ mutex_unlock(&dpm_list_mtx);
+}
+
+/**
+ * unregister_dropped_devices - Unregister devices scheduled for removal
+ *
+ * Unregister all devices on the dpm_destroy list.
+ */
+static void unregister_dropped_devices(void)
+{
+ mutex_lock(&dpm_list_mtx);
+ while (!list_empty(&dpm_destroy)) {
+ struct list_head *entry = dpm_destroy.next;
+ struct device *dev = to_device(entry);
+
+ up(&dev->sem);
+ mutex_unlock(&dpm_list_mtx);
+ /* This also removes the device from the list */
+ device_unregister(dev);
+ mutex_lock(&dpm_list_mtx);
+ }
+ mutex_unlock(&dpm_list_mtx);
+}
/**
* device_resume - Restore state of each device in system.
*
- * Walk the dpm_off list, remove each entry, resume the device,
- * then add it to the dpm_active list.
+ * Resume all the devices, unlock them all, and allow new
+ * devices to be registered once again.
*/
-
void device_resume(void)
{
might_sleep();
- mutex_lock(&dpm_mtx);
dpm_resume();
- mutex_unlock(&dpm_mtx);
+ unlock_all_devices();
+ unregister_dropped_devices();
+ up_write(&pm_sleep_rwsem);
}
-
EXPORT_SYMBOL_GPL(device_resume);
-/**
- * dpm_power_up - Power on some devices.
- *
- * Walk the dpm_off_irq list and power each device up. This
- * is used for devices that required they be powered down with
- * interrupts disabled. As devices are powered on, they are moved
- * to the dpm_active list.
- *
- * Interrupts must be disabled when calling this.
- */
-
-static void dpm_power_up(void)
-{
- while(!list_empty(&dpm_off_irq)) {
- struct list_head * entry = dpm_off_irq.next;
- struct device * dev = to_device(entry);
-
- list_move_tail(entry, &dpm_off);
- resume_device_early(dev);
- }
-}
-
-
-/**
- * device_power_up - Turn on all devices that need special attention.
- *
- * Power on system devices then devices that required we shut them down
- * with interrupts disabled.
- * Called with interrupts disabled.
- */
-
-void device_power_up(void)
-{
- sysdev_resume();
- dpm_power_up();
-}
-
-EXPORT_SYMBOL_GPL(device_power_up);
-
-
/*------------------------- Suspend routines -------------------------*/
-/*
- * The entries in the dpm_active list are in a depth first order, simply
- * because children are guaranteed to be discovered after parents, and
- * are inserted at the back of the list on discovery.
- *
- * All list on the suspend path are done in reverse order, so we operate
- * on the leaves of the device tree (or forests, depending on how you want
- * to look at it ;) first. As nodes are removed from the back of the list,
- * they are inserted into the front of their destintation lists.
- *
- * Things are the reverse on the resume path - iterations are done in
- * forward order, and nodes are inserted at the back of their destination
- * lists. This way, the ancestors will be accessed before their descendents.
- */
-
static inline char *suspend_verb(u32 event)
{
switch (event) {
@@ -222,7 +342,6 @@
}
}
-
static void
suspend_device_dbg(struct device *dev, pm_message_t state, char *info)
{
@@ -232,16 +351,73 @@
}
/**
+ * suspend_device_late - Shut down one device (late suspend).
+ * @dev: Device.
+ * @state: Power state device is entering.
+ *
+ * This is called with interrupts off and only a single CPU running.
+ */
+static int suspend_device_late(struct device *dev, pm_message_t state)
+{
+ int error = 0;
+
+ if (dev->bus && dev->bus->suspend_late) {
+ suspend_device_dbg(dev, state, "LATE ");
+ error = dev->bus->suspend_late(dev, state);
+ suspend_report_result(dev->bus->suspend_late, error);
+ }
+ return error;
+}
+
+/**
+ * device_power_down - Shut down special devices.
+ * @state: Power state to enter.
+ *
+ * Power down devices that require interrupts to be disabled
+ * and move them from the dpm_off list to the dpm_off_irq list.
+ * Then power down system devices.
+ *
+ * Must be called with interrupts disabled and only one CPU running.
+ */
+int device_power_down(pm_message_t state)
+{
+ int error = 0;
+
+ while (!list_empty(&dpm_off)) {
+ struct list_head *entry = dpm_off.prev;
+ struct device *dev = to_device(entry);
+
+ list_del_init(&dev->power.entry);
+ error = suspend_device_late(dev, state);
+ if (error) {
+ printk(KERN_ERR "Could not power down device %s: "
+ "error %d\n",
+ kobject_name(&dev->kobj), error);
+ if (list_empty(&dev->power.entry))
+ list_add(&dev->power.entry, &dpm_off);
+ break;
+ }
+ if (list_empty(&dev->power.entry))
+ list_add(&dev->power.entry, &dpm_off_irq);
+ }
+
+ if (!error)
+ error = sysdev_suspend(state);
+ if (error)
+ dpm_power_up();
+ return error;
+}
+EXPORT_SYMBOL_GPL(device_power_down);
+
+/**
* suspend_device - Save state of one device.
* @dev: Device.
* @state: Power state device is entering.
*/
-
-static int suspend_device(struct device * dev, pm_message_t state)
+int suspend_device(struct device *dev, pm_message_t state)
{
int error = 0;
- down(&dev->sem);
if (dev->power.power_state.event) {
dev_dbg(dev, "PM: suspend %d-->%d\n",
dev->power.power_state.event, state.event);
@@ -264,123 +440,105 @@
error = dev->bus->suspend(dev, state);
suspend_report_result(dev->bus->suspend, error);
}
- up(&dev->sem);
- return error;
-}
-
-
-/*
- * This is called with interrupts off, only a single CPU
- * running. We can't acquire a mutex or semaphore (and we don't
- * need the protection)
- */
-static int suspend_device_late(struct device *dev, pm_message_t state)
-{
- int error = 0;
-
- if (dev->bus && dev->bus->suspend_late) {
- suspend_device_dbg(dev, state, "LATE ");
- error = dev->bus->suspend_late(dev, state);
- suspend_report_result(dev->bus->suspend_late, error);
- }
return error;
}
/**
- * device_suspend - Save state and stop all devices in system.
- * @state: Power state to put each device in.
+ * dpm_suspend - Suspend every device.
+ * @state: Power state to put each device in.
*
- * Walk the dpm_active list, call ->suspend() for each device, and move
- * it to the dpm_off list.
+ * Walk the dpm_locked list. Suspend each device and move it
+ * to the dpm_off list.
*
* (For historical reasons, if it returns -EAGAIN, that used to mean
* that the device would be called again with interrupts disabled.
* These days, we use the "suspend_late()" callback for that, so we
* print a warning and consider it an error).
- *
- * If we get a different error, try and back out.
- *
- * If we hit a failure with any of the devices, call device_resume()
- * above to bring the suspended devices back to life.
- *
*/
-
-int device_suspend(pm_message_t state)
+static int dpm_suspend(pm_message_t state)
{
int error = 0;
- might_sleep();
- mutex_lock(&dpm_mtx);
mutex_lock(&dpm_list_mtx);
- while (!list_empty(&dpm_active) && error == 0) {
- struct list_head * entry = dpm_active.prev;
- struct device * dev = to_device(entry);
+ while (!list_empty(&dpm_locked)) {
+ struct list_head *entry = dpm_locked.prev;
+ struct device *dev = to_device(entry);
+ list_del_init(&dev->power.entry);
+ mutex_unlock(&dpm_list_mtx);
+ error = suspend_device(dev, state);
+ if (error) {
+ printk(KERN_ERR "Could not suspend device %s: "
+ "error %d%s\n",
+ kobject_name(&dev->kobj),
+ error,
+ (error == -EAGAIN ?
+ " (please convert to suspend_late)" :
+ ""));
+ mutex_lock(&dpm_list_mtx);
+ if (list_empty(&dev->power.entry))
+ list_add(&dev->power.entry, &dpm_locked);
+ mutex_unlock(&dpm_list_mtx);
+ break;
+ }
+ mutex_lock(&dpm_list_mtx);
+ if (list_empty(&dev->power.entry))
+ list_add(&dev->power.entry, &dpm_off);
+ }
+ mutex_unlock(&dpm_list_mtx);
+
+ return error;
+}
+
+/**
+ * lock_all_devices - Acquire every device's semaphore
+ *
+ * Go through the dpm_active list. Carefully lock each device's
+ * semaphore and put it in on the dpm_locked list.
+ */
+static void lock_all_devices(void)
+{
+ mutex_lock(&dpm_list_mtx);
+ while (!list_empty(&dpm_active)) {
+ struct list_head *entry = dpm_active.next;
+ struct device *dev = to_device(entry);
+
+ /* Required locking order is dev->sem first,
+ * then dpm_list_mutex. Hence this awkward code.
+ */
get_device(dev);
mutex_unlock(&dpm_list_mtx);
-
- error = suspend_device(dev, state);
-
+ down(&dev->sem);
mutex_lock(&dpm_list_mtx);
- /* Check if the device got removed */
- if (!list_empty(&dev->power.entry)) {
- /* Move it to the dpm_off list */
- if (!error)
- list_move(&dev->power.entry, &dpm_off);
- }
- if (error)
- printk(KERN_ERR "Could not suspend device %s: "
- "error %d%s\n",
- kobject_name(&dev->kobj), error,
- error == -EAGAIN ? " (please convert to suspend_late)" : "");
+ if (list_empty(entry))
+ up(&dev->sem); /* Device was removed */
+ else
+ list_move_tail(entry, &dpm_locked);
put_device(dev);
}
mutex_unlock(&dpm_list_mtx);
- if (error)
- dpm_resume();
-
- mutex_unlock(&dpm_mtx);
- return error;
}
-EXPORT_SYMBOL_GPL(device_suspend);
-
/**
- * device_power_down - Shut down special devices.
- * @state: Power state to enter.
+ * device_suspend - Save state and stop all devices in system.
*
- * Walk the dpm_off_irq list, calling ->power_down() for each device that
- * couldn't power down the device with interrupts enabled. When we're
- * done, power down system devices.
+ * Prevent new devices from being registered, then lock all devices
+ * and suspend them.
*/
-
-int device_power_down(pm_message_t state)
+int device_suspend(pm_message_t state)
{
- int error = 0;
- struct device * dev;
+ int error;
- while (!list_empty(&dpm_off)) {
- struct list_head * entry = dpm_off.prev;
-
- dev = to_device(entry);
- error = suspend_device_late(dev, state);
- if (error)
- goto Error;
- list_move(&dev->power.entry, &dpm_off_irq);
- }
-
- error = sysdev_suspend(state);
- Done:
+ might_sleep();
+ down_write(&pm_sleep_rwsem);
+ lock_all_devices();
+ error = dpm_suspend(state);
+ if (error)
+ device_resume();
return error;
- Error:
- printk(KERN_ERR "Could not power down device %s: "
- "error %d\n", kobject_name(&dev->kobj), error);
- dpm_power_up();
- goto Done;
}
-
-EXPORT_SYMBOL_GPL(device_power_down);
+EXPORT_SYMBOL_GPL(device_suspend);
void __suspend_report_result(const char *function, void *fn, int ret)
{