arch/arm/boot/dts/meson.dtsi - kernel/msm-4.19 - Gitiles

 /*
  * Copyright 2014 Carlo Caione <carlo@caione.org>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This library is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
  *     published by the Free Software Foundation; either version 2 of the
  *     License, or (at your option) any later version.
  *
  *     This library is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  *     You should have received a copy of the GNU General Public
  *     License along with this library; if not, write to the Free
  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  *     MA 02110-1301 USA
  *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 /include/ "skeleton.dtsi"

 / {
 	interrupt-parent = <&gic>;

 	L2: l2-cache-controller@c4200000 {
 		compatible = "arm,pl310-cache";
 		reg = <0xc4200000 0x1000>;
 		cache-unified;
 		cache-level = <2>;
 	};

 	gic: interrupt-controller@c4301000 {
 		compatible = "arm,cortex-a9-gic";
 		reg = <0xc4301000 0x1000>,
 		      <0xc4300100 0x0100>;
 		interrupt-controller;
 		#interrupt-cells = <3>;
 	};

 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;

 		cbus: cbus@c1100000 {
 			compatible = "simple-bus";
 			reg = <0xc1100000 0x200000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0xc1100000 0x200000>;

 			hwrng: rng@8100 {
 				compatible = "amlogic,meson-rng";
 				reg = <0x8100 0x8>;
 			};

 			uart_A: serial@84c0 {
 				compatible = "amlogic,meson-uart";
 				reg = <0x84c0 0x18>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};

 			uart_B: serial@84dc {
 				compatible = "amlogic,meson-uart";
 				reg = <0x84dc 0x18>;
 				interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};

 			i2c_A: i2c@8500 {
 				compatible = "amlogic,meson6-i2c";
 				reg = <0x8500 0x20>;
 				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};

 			saradc: adc@8680 {
 				compatible = "amlogic,meson-saradc";
 				reg = <0x8680 0x34>;
 				#io-channel-cells = <1>;
 				interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};

 			uart_C: serial@8700 {
 				compatible = "amlogic,meson-uart";
 				reg = <0x8700 0x18>;
 				interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};

 			i2c_B: i2c@87c0 {
 				compatible = "amlogic,meson6-i2c";
 				reg = <0x87c0 0x20>;
 				interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};

 			usb0_phy: phy@8800 {
 				compatible = "amlogic,meson-mx-usb2-phy";
 				#phy-cells = <0>;
 				reg = <0x8800 0x20>;
 				status = "disabled";
 			};

 			usb1_phy: phy@8820 {
 				compatible = "amlogic,meson-mx-usb2-phy";
 				#phy-cells = <0>;
 				reg = <0x8820 0x20>;
 				status = "disabled";
 			};

 			spifc: spi@8c80 {
 				compatible = "amlogic,meson6-spifc";
 				reg = <0x8c80 0x80>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};

 			wdt: watchdog@9900 {
 				compatible = "amlogic,meson6-wdt";
 				reg = <0x9900 0x8>;
 				interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 			};

 			timer@9940 {
 				compatible = "amlogic,meson6-timer";
 				reg = <0x9940 0x18>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>;
 			};
 		};

 		aobus: aobus@c8100000 {
 			compatible = "simple-bus";
 			reg = <0xc8100000 0x100000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0xc8100000 0x100000>;

 			ir_receiver: ir-receiver@480 {
 				compatible= "amlogic,meson6-ir";
 				reg = <0x480 0x20>;
 				interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};

 			uart_AO: serial@4c0 {
 				compatible = "amlogic,meson-uart";
 				reg = <0x4c0 0x18>;
 				interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
 				status = "disabled";
 			};

 			i2c_AO: i2c@500 {
 				compatible = "amlogic,meson6-i2c";
 				reg = <0x500 0x20>;
 				interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
 			};
 		};

 		usb0: usb@c9040000 {
 			compatible = "snps,dwc2";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xc9040000 0x40000>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>;
 			phys = <&usb0_phy>;
 			phy-names = "usb2-phy";
 			dr_mode = "host";
 			status = "disabled";
 		};

 		usb1: usb@c90c0000 {
 			compatible = "snps,dwc2";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xc90c0000 0x40000>;
 			interrupts = <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
 			phys = <&usb1_phy>;
 			phy-names = "usb2-phy";
 			dr_mode = "host";
 			status = "disabled";
 		};

 		ethmac: ethernet@c9410000 {
 			compatible = "amlogic,meson6-dwmac", "snps,dwmac";
 			reg = <0xc9410000 0x10000
 			       0xc1108108 0x4>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "macirq";
 			status = "disabled";
 		};
 	};
 }; /* end of / */
	/*
	* Copyright 2014 Carlo Caione <carlo@caione.org>
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This library is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of the
	* License, or (at your option) any later version.
	*
	* This library is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public
	* License along with this library; if not, write to the Free
	* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
	* MA 02110-1301 USA
	*
	* Or, alternatively,
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use,
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	#include <dt-bindings/interrupt-controller/irq.h>
	#include <dt-bindings/interrupt-controller/arm-gic.h>
	/include/ "skeleton.dtsi"

	/ {
	interrupt-parent = <&gic>;

	L2: l2-cache-controller@c4200000 {
	compatible = "arm,pl310-cache";
	reg = <0xc4200000 0x1000>;
	cache-unified;
	cache-level = <2>;
	};

	gic: interrupt-controller@c4301000 {
	compatible = "arm,cortex-a9-gic";
	reg = <0xc4301000 0x1000>,
	<0xc4300100 0x0100>;
	interrupt-controller;
	#interrupt-cells = <3>;
	};

	soc {
	compatible = "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges;

	cbus: cbus@c1100000 {
	compatible = "simple-bus";
	reg = <0xc1100000 0x200000>;
	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0x0 0xc1100000 0x200000>;

	hwrng: rng@8100 {
	compatible = "amlogic,meson-rng";
	reg = <0x8100 0x8>;
	};

	uart_A: serial@84c0 {
	compatible = "amlogic,meson-uart";
	reg = <0x84c0 0x18>;
	interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
	status = "disabled";
	};

	uart_B: serial@84dc {
	compatible = "amlogic,meson-uart";
	reg = <0x84dc 0x18>;
	interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
	status = "disabled";
	};

	i2c_A: i2c@8500 {
	compatible = "amlogic,meson6-i2c";
	reg = <0x8500 0x20>;
	interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
	#address-cells = <1>;
	#size-cells = <0>;
	status = "disabled";
	};

	saradc: adc@8680 {
	compatible = "amlogic,meson-saradc";
	reg = <0x8680 0x34>;
	#io-channel-cells = <1>;
	interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
	status = "disabled";
	};

	uart_C: serial@8700 {
	compatible = "amlogic,meson-uart";
	reg = <0x8700 0x18>;
	interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
	status = "disabled";
	};

	i2c_B: i2c@87c0 {
	compatible = "amlogic,meson6-i2c";
	reg = <0x87c0 0x20>;
	interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
	#address-cells = <1>;
	#size-cells = <0>;
	status = "disabled";
	};

	usb0_phy: phy@8800 {
	compatible = "amlogic,meson-mx-usb2-phy";
	#phy-cells = <0>;
	reg = <0x8800 0x20>;
	status = "disabled";
	};

	usb1_phy: phy@8820 {
	compatible = "amlogic,meson-mx-usb2-phy";
	#phy-cells = <0>;
	reg = <0x8820 0x20>;
	status = "disabled";
	};

	spifc: spi@8c80 {
	compatible = "amlogic,meson6-spifc";
	reg = <0x8c80 0x80>;
	#address-cells = <1>;
	#size-cells = <0>;
	status = "disabled";
	};

	wdt: watchdog@9900 {
	compatible = "amlogic,meson6-wdt";
	reg = <0x9900 0x8>;
	interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
	};

	timer@9940 {
	compatible = "amlogic,meson6-timer";
	reg = <0x9940 0x18>;
	interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>;
	};
	};

	aobus: aobus@c8100000 {
	compatible = "simple-bus";
	reg = <0xc8100000 0x100000>;
	#address-cells = <1>;
	#size-cells = <1>;
	ranges = <0x0 0xc8100000 0x100000>;

	ir_receiver: ir-receiver@480 {
	compatible= "amlogic,meson6-ir";
	reg = <0x480 0x20>;
	interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>;
	status = "disabled";
	};

	uart_AO: serial@4c0 {
	compatible = "amlogic,meson-uart";
	reg = <0x4c0 0x18>;
	interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
	status = "disabled";
	};

	i2c_AO: i2c@500 {
	compatible = "amlogic,meson6-i2c";
	reg = <0x500 0x20>;
	interrupts = <GIC_SPI 92 IRQ_TYPE_EDGE_RISING>;
	#address-cells = <1>;
	#size-cells = <0>;
	status = "disabled";
	};
	};

	usb0: usb@c9040000 {
	compatible = "snps,dwc2";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xc9040000 0x40000>;
	interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>;
	phys = <&usb0_phy>;
	phy-names = "usb2-phy";
	dr_mode = "host";
	status = "disabled";
	};

	usb1: usb@c90c0000 {
	compatible = "snps,dwc2";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0xc90c0000 0x40000>;
	interrupts = <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
	phys = <&usb1_phy>;
	phy-names = "usb2-phy";
	dr_mode = "host";
	status = "disabled";
	};

	ethmac: ethernet@c9410000 {
	compatible = "amlogic,meson6-dwmac", "snps,dwmac";
	reg = <0xc9410000 0x10000
	0xc1108108 0x4>;
	interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
	interrupt-names = "macirq";
	status = "disabled";
	};
	};
	}; /* end of / */