| /* |
| * watchdog driver for ZTE's zx2967 family |
| * |
| * Copyright (C) 2017 ZTE Ltd. |
| * |
| * Author: Baoyou Xie <baoyou.xie@linaro.org> |
| * |
| * License terms: GNU General Public License (GPL) version 2 |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/reset.h> |
| #include <linux/watchdog.h> |
| |
| #define ZX2967_WDT_CFG_REG 0x4 |
| #define ZX2967_WDT_LOAD_REG 0x8 |
| #define ZX2967_WDT_REFRESH_REG 0x18 |
| #define ZX2967_WDT_START_REG 0x1c |
| |
| #define ZX2967_WDT_REFRESH_MASK GENMASK(5, 0) |
| |
| #define ZX2967_WDT_CFG_DIV(n) ((((n) & 0xff) - 1) << 8) |
| #define ZX2967_WDT_START_EN 0x1 |
| |
| /* |
| * Hardware magic number. |
| * When watchdog reg is written, the lowest 16 bits are valid, but |
| * the highest 16 bits should be always this number. |
| */ |
| #define ZX2967_WDT_WRITEKEY (0x1234 << 16) |
| #define ZX2967_WDT_VAL_MASK GENMASK(15, 0) |
| |
| #define ZX2967_WDT_DIV_DEFAULT 16 |
| #define ZX2967_WDT_DEFAULT_TIMEOUT 32 |
| #define ZX2967_WDT_MIN_TIMEOUT 1 |
| #define ZX2967_WDT_MAX_TIMEOUT 524 |
| #define ZX2967_WDT_MAX_COUNT 0xffff |
| |
| #define ZX2967_WDT_CLK_FREQ 0x8000 |
| |
| #define ZX2967_WDT_FLAG_REBOOT_MON BIT(0) |
| |
| struct zx2967_wdt { |
| struct watchdog_device wdt_device; |
| void __iomem *reg_base; |
| struct clk *clock; |
| }; |
| |
| static inline u32 zx2967_wdt_readl(struct zx2967_wdt *wdt, u16 reg) |
| { |
| return readl_relaxed(wdt->reg_base + reg); |
| } |
| |
| static inline void zx2967_wdt_writel(struct zx2967_wdt *wdt, u16 reg, u32 val) |
| { |
| writel_relaxed(val | ZX2967_WDT_WRITEKEY, wdt->reg_base + reg); |
| } |
| |
| static void zx2967_wdt_refresh(struct zx2967_wdt *wdt) |
| { |
| u32 val; |
| |
| val = zx2967_wdt_readl(wdt, ZX2967_WDT_REFRESH_REG); |
| /* |
| * Bit 4-5, 1 and 2: refresh config info |
| * Bit 2-3, 1 and 2: refresh counter |
| * Bit 0-1, 1 and 2: refresh int-value |
| * we shift each group value between 1 and 2 to refresh all data. |
| */ |
| val ^= ZX2967_WDT_REFRESH_MASK; |
| zx2967_wdt_writel(wdt, ZX2967_WDT_REFRESH_REG, |
| val & ZX2967_WDT_VAL_MASK); |
| } |
| |
| static int |
| zx2967_wdt_set_timeout(struct watchdog_device *wdd, unsigned int timeout) |
| { |
| struct zx2967_wdt *wdt = watchdog_get_drvdata(wdd); |
| unsigned int divisor = ZX2967_WDT_DIV_DEFAULT; |
| u32 count; |
| |
| count = timeout * ZX2967_WDT_CLK_FREQ; |
| if (count > divisor * ZX2967_WDT_MAX_COUNT) |
| divisor = DIV_ROUND_UP(count, ZX2967_WDT_MAX_COUNT); |
| count = DIV_ROUND_UP(count, divisor); |
| zx2967_wdt_writel(wdt, ZX2967_WDT_CFG_REG, |
| ZX2967_WDT_CFG_DIV(divisor) & ZX2967_WDT_VAL_MASK); |
| zx2967_wdt_writel(wdt, ZX2967_WDT_LOAD_REG, |
| count & ZX2967_WDT_VAL_MASK); |
| zx2967_wdt_refresh(wdt); |
| wdd->timeout = (count * divisor) / ZX2967_WDT_CLK_FREQ; |
| |
| return 0; |
| } |
| |
| static void __zx2967_wdt_start(struct zx2967_wdt *wdt) |
| { |
| u32 val; |
| |
| val = zx2967_wdt_readl(wdt, ZX2967_WDT_START_REG); |
| val |= ZX2967_WDT_START_EN; |
| zx2967_wdt_writel(wdt, ZX2967_WDT_START_REG, |
| val & ZX2967_WDT_VAL_MASK); |
| } |
| |
| static void __zx2967_wdt_stop(struct zx2967_wdt *wdt) |
| { |
| u32 val; |
| |
| val = zx2967_wdt_readl(wdt, ZX2967_WDT_START_REG); |
| val &= ~ZX2967_WDT_START_EN; |
| zx2967_wdt_writel(wdt, ZX2967_WDT_START_REG, |
| val & ZX2967_WDT_VAL_MASK); |
| } |
| |
| static int zx2967_wdt_start(struct watchdog_device *wdd) |
| { |
| struct zx2967_wdt *wdt = watchdog_get_drvdata(wdd); |
| |
| zx2967_wdt_set_timeout(wdd, wdd->timeout); |
| __zx2967_wdt_start(wdt); |
| |
| return 0; |
| } |
| |
| static int zx2967_wdt_stop(struct watchdog_device *wdd) |
| { |
| struct zx2967_wdt *wdt = watchdog_get_drvdata(wdd); |
| |
| __zx2967_wdt_stop(wdt); |
| |
| return 0; |
| } |
| |
| static int zx2967_wdt_keepalive(struct watchdog_device *wdd) |
| { |
| struct zx2967_wdt *wdt = watchdog_get_drvdata(wdd); |
| |
| zx2967_wdt_refresh(wdt); |
| |
| return 0; |
| } |
| |
| #define ZX2967_WDT_OPTIONS \ |
| (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE) |
| static const struct watchdog_info zx2967_wdt_ident = { |
| .options = ZX2967_WDT_OPTIONS, |
| .identity = "zx2967 watchdog", |
| }; |
| |
| static struct watchdog_ops zx2967_wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = zx2967_wdt_start, |
| .stop = zx2967_wdt_stop, |
| .ping = zx2967_wdt_keepalive, |
| .set_timeout = zx2967_wdt_set_timeout, |
| }; |
| |
| static void zx2967_wdt_reset_sysctrl(struct device *dev) |
| { |
| int ret; |
| void __iomem *regmap; |
| unsigned int offset, mask, config; |
| struct of_phandle_args out_args; |
| |
| ret = of_parse_phandle_with_fixed_args(dev->of_node, |
| "zte,wdt-reset-sysctrl", 3, 0, &out_args); |
| if (ret) |
| return; |
| |
| offset = out_args.args[0]; |
| config = out_args.args[1]; |
| mask = out_args.args[2]; |
| |
| regmap = syscon_node_to_regmap(out_args.np); |
| if (IS_ERR(regmap)) { |
| of_node_put(out_args.np); |
| return; |
| } |
| |
| regmap_update_bits(regmap, offset, mask, config); |
| of_node_put(out_args.np); |
| } |
| |
| static int zx2967_wdt_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct zx2967_wdt *wdt; |
| struct resource *base; |
| int ret; |
| struct reset_control *rstc; |
| |
| wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); |
| if (!wdt) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, wdt); |
| |
| wdt->wdt_device.info = &zx2967_wdt_ident; |
| wdt->wdt_device.ops = &zx2967_wdt_ops; |
| wdt->wdt_device.timeout = ZX2967_WDT_DEFAULT_TIMEOUT; |
| wdt->wdt_device.max_timeout = ZX2967_WDT_MAX_TIMEOUT; |
| wdt->wdt_device.min_timeout = ZX2967_WDT_MIN_TIMEOUT; |
| wdt->wdt_device.parent = &pdev->dev; |
| |
| base = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| wdt->reg_base = devm_ioremap_resource(dev, base); |
| if (IS_ERR(wdt->reg_base)) |
| return PTR_ERR(wdt->reg_base); |
| |
| zx2967_wdt_reset_sysctrl(dev); |
| |
| wdt->clock = devm_clk_get(dev, NULL); |
| if (IS_ERR(wdt->clock)) { |
| dev_err(dev, "failed to find watchdog clock source\n"); |
| return PTR_ERR(wdt->clock); |
| } |
| |
| ret = clk_prepare_enable(wdt->clock); |
| if (ret < 0) { |
| dev_err(dev, "failed to enable clock\n"); |
| return ret; |
| } |
| clk_set_rate(wdt->clock, ZX2967_WDT_CLK_FREQ); |
| |
| rstc = devm_reset_control_get(dev, NULL); |
| if (IS_ERR(rstc)) { |
| dev_err(dev, "failed to get rstc"); |
| ret = PTR_ERR(rstc); |
| goto err; |
| } |
| |
| reset_control_assert(rstc); |
| reset_control_deassert(rstc); |
| |
| watchdog_set_drvdata(&wdt->wdt_device, wdt); |
| watchdog_init_timeout(&wdt->wdt_device, |
| ZX2967_WDT_DEFAULT_TIMEOUT, dev); |
| watchdog_set_nowayout(&wdt->wdt_device, WATCHDOG_NOWAYOUT); |
| |
| ret = watchdog_register_device(&wdt->wdt_device); |
| if (ret) |
| goto err; |
| |
| dev_info(dev, "watchdog enabled (timeout=%d sec, nowayout=%d)", |
| wdt->wdt_device.timeout, WATCHDOG_NOWAYOUT); |
| |
| return 0; |
| |
| err: |
| clk_disable_unprepare(wdt->clock); |
| return ret; |
| } |
| |
| static int zx2967_wdt_remove(struct platform_device *pdev) |
| { |
| struct zx2967_wdt *wdt = platform_get_drvdata(pdev); |
| |
| watchdog_unregister_device(&wdt->wdt_device); |
| clk_disable_unprepare(wdt->clock); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id zx2967_wdt_match[] = { |
| { .compatible = "zte,zx296718-wdt", }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, zx2967_wdt_match); |
| |
| static struct platform_driver zx2967_wdt_driver = { |
| .probe = zx2967_wdt_probe, |
| .remove = zx2967_wdt_remove, |
| .driver = { |
| .name = "zx2967-wdt", |
| .of_match_table = of_match_ptr(zx2967_wdt_match), |
| }, |
| }; |
| module_platform_driver(zx2967_wdt_driver); |
| |
| MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>"); |
| MODULE_DESCRIPTION("ZTE zx2967 Watchdog Device Driver"); |
| MODULE_LICENSE("GPL v2"); |