davinci: cleanup mdio arch code and switch to phy_id
This patch removes davinci architecture code that has now been rendered
useless by the previous patches in the MDIO separation series.
In addition, the earlier phy_mask definitions have been replaced with
corresponding phy_id definitions.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Tested-by: Michael Williamson <michael.williamson@criticallink.com>
Tested-by: Caglar Akyuz <caglarakyuz@gmail.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index ef1ab0b..1bb89d3 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -31,9 +31,7 @@
#include <mach/usb.h>
#include <mach/aemif.h>
-#define DA830_EVM_PHY_MASK 0x0
-#define DA830_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */
-
+#define DA830_EVM_PHY_ID ""
/*
* USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
*/
@@ -558,9 +556,8 @@
da830_evm_usb_init();
- soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK;
- soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
soc_info->emac_pdata->rmii_en = 1;
+ soc_info->emac_pdata->phy_id = DA830_EVM_PHY_ID;
ret = davinci_cfg_reg_list(da830_cpgmac_pins);
if (ret)
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index ac2297c..5e435b0 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -38,9 +38,7 @@
#include <mach/mux.h>
#include <mach/aemif.h>
-#define DA850_EVM_PHY_MASK 0x1
-#define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */
-
+#define DA850_EVM_PHY_ID "0:00"
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
@@ -678,8 +676,7 @@
/* Enable/Disable MII MDIO clock */
gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);
- soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
- soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
+ soc_info->emac_pdata->phy_id = DA850_EVM_PHY_ID;
ret = da8xx_register_emac();
if (ret)
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index bdea2da..a06b84c 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -54,9 +54,7 @@
return 0;
}
-#define DM365_EVM_PHY_MASK (0x2)
-#define DM365_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
-
+#define DM365_EVM_PHY_ID "0:01"
/*
* A MAX-II CPLD is used for various board control functions.
*/
@@ -535,8 +533,7 @@
/* ... and ENET ... */
dm365evm_emac_configure();
- soc_info->emac_pdata->phy_mask = DM365_EVM_PHY_MASK;
- soc_info->emac_pdata->mdio_max_freq = DM365_EVM_MDIO_FREQUENCY;
+ soc_info->emac_pdata->phy_id = DM365_EVM_PHY_ID;
resets &= ~BIT(3);
/* ... and AIC33 */
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 65bb940..44a2f0a 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -39,9 +39,7 @@
#include <mach/usb.h>
#include <mach/aemif.h>
-#define DM644X_EVM_PHY_MASK (0x2)
-#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
-
+#define DM644X_EVM_PHY_ID "0:01"
#define LXT971_PHY_ID (0x001378e2)
#define LXT971_PHY_MASK (0xfffffff0)
@@ -707,9 +705,7 @@
davinci_serial_init(&uart_config);
dm644x_init_asp(&dm644x_evm_snd_data);
- soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
- soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;
-
+ soc_info->emac_pdata->phy_id = DM644X_EVM_PHY_ID;
/* Register the fixup for PHY on DaVinci */
phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
davinci_phy_fixup);
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 5a29955..67669bb 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -729,9 +729,7 @@
.enabled_uarts = (1 << 0),
};
-#define DM646X_EVM_PHY_MASK (0x2)
-#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
-
+#define DM646X_EVM_PHY_ID "0:01"
/*
* The following EDMA channels/slots are not being used by drivers (for
* example: Timer, GPIO, UART events etc) on dm646x, hence they are being
@@ -784,8 +782,7 @@
if (HAS_ATA)
davinci_init_ide();
- soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
- soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
+ soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID;
}
#define DM646X_EVM_REF_FREQ 27000000
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 84d5aff5..6f12a18 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -24,9 +24,7 @@
#include <mach/nand.h>
#include <mach/mux.h>
-#define MITYOMAPL138_PHY_MASK 0x08 /* hardcoded for now */
-#define MITYOMAPL138_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
-
+#define MITYOMAPL138_PHY_ID "0:03"
static struct davinci_i2c_platform_data mityomap_i2c_0_pdata = {
.bus_freq = 100, /* kHz */
.bus_delay = 0, /* usec */
@@ -273,9 +271,7 @@
/* configure the CFGCHIP3 register for RMII or MII */
__raw_writel(val, cfg_chip3_base);
- soc_info->emac_pdata->phy_mask = MITYOMAPL138_PHY_MASK;
- pr_debug("setting phy_mask to %x\n", soc_info->emac_pdata->phy_mask);
- soc_info->emac_pdata->mdio_max_freq = MITYOMAPL138_MDIO_FREQUENCY;
+ soc_info->emac_pdata->phy_id = MITYOMAPL138_PHY_ID;
ret = da8xx_register_emac();
if (ret)
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 4c30e92..04a8d16 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -39,9 +39,7 @@
#include <mach/mmc.h>
#include <mach/usb.h>
-#define NEUROS_OSD2_PHY_MASK 0x2
-#define NEUROS_OSD2_MDIO_FREQUENCY 2200000 /* PHY bus frequency */
-
+#define NEUROS_OSD2_PHY_ID "0:01"
#define LXT971_PHY_ID 0x001378e2
#define LXT971_PHY_MASK 0xfffffff0
@@ -252,8 +250,7 @@
davinci_serial_init(&uart_config);
dm644x_init_asp(&dm644x_ntosd2_snd_data);
- soc_info->emac_pdata->phy_mask = NEUROS_OSD2_PHY_MASK;
- soc_info->emac_pdata->mdio_max_freq = NEUROS_OSD2_MDIO_FREQUENCY;
+ soc_info->emac_pdata->phy_id = NEUROS_OSD2_PHY_ID;
davinci_setup_usb(1000, 8);
/*
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 23e664a..ab4292d 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -42,9 +42,7 @@
#include <mach/mux.h>
#include <mach/usb.h>
-#define SFFSDR_PHY_MASK (0x2)
-#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
-
+#define SFFSDR_PHY_ID "0:01"
static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
/* U-Boot Environment: Block 0
* UBL: Block 1
@@ -143,8 +141,7 @@
ARRAY_SIZE(davinci_sffsdr_devices));
sffsdr_init_i2c();
davinci_serial_init(&uart_config);
- soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
- soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
+ soc_info->emac_pdata->phy_id = SFFSDR_PHY_ID;
davinci_setup_usb(0, 0); /* We support only peripheral mode. */
/* mux VLYNQ pins */
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 9039221..9eec630 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -42,7 +42,6 @@
#define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000
#define DA8XX_EMAC_MOD_REG_OFFSET 0x2000
#define DA8XX_EMAC_RAM_OFFSET 0x0000
-#define DA8XX_MDIO_REG_OFFSET 0x4000
#define DA8XX_EMAC_CTRL_RAM_SIZE SZ_8K
void __iomem *da8xx_syscfg0_base;
@@ -381,7 +380,6 @@
.ctrl_reg_offset = DA8XX_EMAC_CTRL_REG_OFFSET,
.ctrl_mod_reg_offset = DA8XX_EMAC_MOD_REG_OFFSET,
.ctrl_ram_offset = DA8XX_EMAC_RAM_OFFSET,
- .mdio_reg_offset = DA8XX_MDIO_REG_OFFSET,
.ctrl_ram_size = DA8XX_EMAC_CTRL_RAM_SIZE,
.version = EMAC_VERSION_2,
};
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 71f0f9d..240f392 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -691,7 +691,6 @@
.ctrl_reg_offset = DM365_EMAC_CNTRL_OFFSET,
.ctrl_mod_reg_offset = DM365_EMAC_CNTRL_MOD_OFFSET,
.ctrl_ram_offset = DM365_EMAC_CNTRL_RAM_OFFSET,
- .mdio_reg_offset = DM365_EMAC_MDIO_OFFSET,
.ctrl_ram_size = DM365_EMAC_CNTRL_RAM_SIZE,
.version = EMAC_VERSION_2,
};
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index c103b2c..41b7a95 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -322,7 +322,6 @@
.ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET,
.ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET,
.ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET,
- .mdio_reg_offset = DM644X_EMAC_MDIO_OFFSET,
.ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE,
.version = EMAC_VERSION_1,
};
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 8da886b..08db90f 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -358,7 +358,6 @@
.ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET,
.ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET,
.ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET,
- .mdio_reg_offset = DM646X_EMAC_MDIO_OFFSET,
.ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE,
.version = EMAC_VERSION_2,
};
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
index dbb5052..2563bf4 100644
--- a/arch/arm/mach-davinci/include/mach/dm365.h
+++ b/arch/arm/mach-davinci/include/mach/dm365.h
@@ -25,7 +25,6 @@
#define DM365_EMAC_CNTRL_OFFSET (0x0000)
#define DM365_EMAC_CNTRL_MOD_OFFSET (0x3000)
#define DM365_EMAC_CNTRL_RAM_OFFSET (0x1000)
-#define DM365_EMAC_MDIO_OFFSET (0x4000)
#define DM365_EMAC_CNTRL_RAM_SIZE (0x2000)
/* Base of key scan register bank */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 5159117..5a1b26d4 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -32,7 +32,6 @@
#define DM644X_EMAC_CNTRL_OFFSET (0x0000)
#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000)
#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000)
-#define DM644X_EMAC_MDIO_OFFSET (0x4000)
#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000)
#define DM644X_ASYNC_EMIF_CONTROL_BASE 0x01E00000
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index 1c4dca9..7a27f3f 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -23,7 +23,6 @@
#define DM646X_EMAC_CNTRL_OFFSET (0x0000)
#define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000)
#define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000)
-#define DM646X_EMAC_MDIO_OFFSET (0x4000)
#define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000)
#define DM646X_ASYNC_EMIF_CONTROL_BASE 0x20008000