spi: s3c64xx: move to generic dmaengine API
The spi-s3c64xx uses a Samsung proprietary interface for
talking to the DMA engine, which does not work with
multiplatform kernels.
This version of the patch leaves the old code in place,
behind an #ifdef. This can be removed in the future,
after the s3c64xx platform start supporting the regular
dmaengine interface. An earlier version of this patch was
tested successfully on exynos5250 by Padma Venkat.
The conversion was rather mechanical, since the samsung
interface is just a shallow wrapper around the dmaengine
interface.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 51afedd..03db14d 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -10,6 +10,7 @@
* published by the Free Software Foundation.
*/
+#include <linux/amba/pl330.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
@@ -1552,6 +1553,9 @@
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi0_cfg_gpio;
+#ifdef CONFIG_PL330_DMA
+ pd.filter = pl330_filter;
+#endif
s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi0);
}
@@ -1590,6 +1594,9 @@
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi1_cfg_gpio;
+#ifdef CONFIG_PL330_DMA
+ pd.filter = pl330_filter;
+#endif
s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi1);
}
@@ -1628,6 +1635,9 @@
pd.num_cs = num_cs;
pd.src_clk_nr = src_clk_nr;
pd.cfg_gpio = (cfg_gpio) ? cfg_gpio : s3c64xx_spi2_cfg_gpio;
+#ifdef CONFIG_PL330_DMA
+ pd.filter = pl330_filter;
+#endif
s3c_set_platdata(&pd, sizeof(pd), &s3c64xx_device_spi2);
}
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 682b1e7..4989aeb 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -24,6 +24,7 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/spi/spi.h>
@@ -31,9 +32,12 @@
#include <linux/of.h>
#include <linux/of_gpio.h>
-#include <mach/dma.h>
#include <linux/platform_data/spi-s3c64xx.h>
+#ifdef CONFIG_SAMSUNG_DMADEV
+#include <mach/dma.h>
+#endif
+
#define MAX_SPI_PORTS 3
/* Registers and bit-fields */
@@ -131,9 +135,9 @@
#define TXBUSY (1<<3)
struct s3c64xx_spi_dma_data {
- unsigned ch;
+ struct dma_chan *ch;
enum dma_transfer_direction direction;
- enum dma_ch dmach;
+ unsigned int dmach;
};
/**
@@ -195,16 +199,14 @@
unsigned cur_speed;
struct s3c64xx_spi_dma_data rx_dma;
struct s3c64xx_spi_dma_data tx_dma;
+#ifdef CONFIG_SAMSUNG_DMADEV
struct samsung_dma_ops *ops;
+#endif
struct s3c64xx_spi_port_config *port_conf;
unsigned int port_id;
unsigned long gpios[4];
};
-static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
- .name = "samsung-spi-dma",
-};
-
static void flush_fifo(struct s3c64xx_spi_driver_data *sdd)
{
void __iomem *regs = sdd->regs;
@@ -281,6 +283,13 @@
spin_unlock_irqrestore(&sdd->lock, flags);
}
+#ifdef CONFIG_SAMSUNG_DMADEV
+/* FIXME: remove this section once arch/arm/mach-s3c64xx uses dmaengine */
+
+static struct s3c2410_dma_client s3c64xx_spi_dma_client = {
+ .name = "samsung-spi-dma",
+};
+
static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
unsigned len, dma_addr_t buf)
{
@@ -294,14 +303,14 @@
config.direction = sdd->rx_dma.direction;
config.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA;
config.width = sdd->cur_bpw / 8;
- sdd->ops->config(sdd->rx_dma.ch, &config);
+ sdd->ops->config((enum dma_ch)sdd->rx_dma.ch, &config);
} else {
sdd = container_of((void *)dma,
struct s3c64xx_spi_driver_data, tx_dma);
config.direction = sdd->tx_dma.direction;
config.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA;
config.width = sdd->cur_bpw / 8;
- sdd->ops->config(sdd->tx_dma.ch, &config);
+ sdd->ops->config((enum dma_ch)sdd->tx_dma.ch, &config);
}
info.cap = DMA_SLAVE;
@@ -311,8 +320,8 @@
info.direction = dma->direction;
info.buf = buf;
- sdd->ops->prepare(dma->ch, &info);
- sdd->ops->trigger(dma->ch);
+ sdd->ops->prepare((enum dma_ch)dma->ch, &info);
+ sdd->ops->trigger((enum dma_ch)dma->ch);
}
static int acquire_dma(struct s3c64xx_spi_driver_data *sdd)
@@ -325,12 +334,126 @@
req.cap = DMA_SLAVE;
req.client = &s3c64xx_spi_dma_client;
- sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &req, dev, "rx");
- sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &req, dev, "tx");
+ sdd->rx_dma.ch = (void *)sdd->ops->request(sdd->rx_dma.dmach, &req, dev, "rx");
+ sdd->tx_dma.ch = (void *)sdd->ops->request(sdd->tx_dma.dmach, &req, dev, "tx");
return 1;
}
+static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
+{
+ struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
+
+ /* Acquire DMA channels */
+ while (!acquire_dma(sdd))
+ usleep_range(10000, 11000);
+
+ pm_runtime_get_sync(&sdd->pdev->dev);
+
+ return 0;
+}
+
+static int s3c64xx_spi_unprepare_transfer(struct spi_master *spi)
+{
+ struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
+
+ /* Free DMA channels */
+ sdd->ops->release((enum dma_ch)sdd->rx_dma.ch, &s3c64xx_spi_dma_client);
+ sdd->ops->release((enum dma_ch)sdd->tx_dma.ch, &s3c64xx_spi_dma_client);
+
+ pm_runtime_put(&sdd->pdev->dev);
+
+ return 0;
+}
+
+static void s3c64xx_spi_dma_stop(struct s3c64xx_spi_driver_data *sdd,
+ struct s3c64xx_spi_dma_data *dma)
+{
+ sdd->ops->stop((enum dma_ch)dma->ch);
+}
+#else
+
+static void prepare_dma(struct s3c64xx_spi_dma_data *dma,
+ unsigned len, dma_addr_t buf)
+{
+ struct s3c64xx_spi_driver_data *sdd;
+ struct dma_slave_config config;
+ struct scatterlist sg;
+ struct dma_async_tx_descriptor *desc;
+
+ if (dma->direction == DMA_DEV_TO_MEM) {
+ sdd = container_of((void *)dma,
+ struct s3c64xx_spi_driver_data, rx_dma);
+ config.direction = dma->direction;
+ config.src_addr = sdd->sfr_start + S3C64XX_SPI_RX_DATA;
+ config.src_addr_width = sdd->cur_bpw / 8;
+ config.src_maxburst = 1;
+ dmaengine_slave_config(dma->ch, &config);
+ } else {
+ sdd = container_of((void *)dma,
+ struct s3c64xx_spi_driver_data, tx_dma);
+ config.direction = dma->direction;
+ config.dst_addr = sdd->sfr_start + S3C64XX_SPI_TX_DATA;
+ config.dst_addr_width = sdd->cur_bpw / 8;
+ config.dst_maxburst = 1;
+ dmaengine_slave_config(dma->ch, &config);
+ }
+
+ sg_init_table(&sg, 1);
+ sg_dma_len(&sg) = len;
+ sg_set_page(&sg, pfn_to_page(PFN_DOWN(buf)),
+ len, offset_in_page(buf));
+ sg_dma_address(&sg) = buf;
+
+ desc = dmaengine_prep_slave_sg(dma->ch,
+ &sg, 1, dma->direction, DMA_PREP_INTERRUPT);
+
+ desc->callback = s3c64xx_spi_dmacb;
+ desc->callback_param = dma;
+
+ dmaengine_submit(desc);
+ dma_async_issue_pending(dma->ch);
+}
+
+static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
+{
+ struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
+ dma_filter_fn filter = sdd->cntrlr_info->filter;
+ struct device *dev = &sdd->pdev->dev;
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ /* Acquire DMA channels */
+ sdd->rx_dma.ch = dma_request_slave_channel_compat(mask, filter,
+ (void*)sdd->rx_dma.dmach, dev, "rx");
+ sdd->tx_dma.ch = dma_request_slave_channel_compat(mask, filter,
+ (void*)sdd->tx_dma.dmach, dev, "tx");
+ pm_runtime_get_sync(&sdd->pdev->dev);
+
+ return 0;
+}
+
+static int s3c64xx_spi_unprepare_transfer(struct spi_master *spi)
+{
+ struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
+
+ /* Free DMA channels */
+ dma_release_channel(sdd->rx_dma.ch);
+ dma_release_channel(sdd->tx_dma.ch);
+
+ pm_runtime_put(&sdd->pdev->dev);
+ return 0;
+}
+
+static void s3c64xx_spi_dma_stop(struct s3c64xx_spi_driver_data *sdd,
+ struct s3c64xx_spi_dma_data *dma)
+{
+ dmaengine_terminate_all(dma->ch);
+}
+#endif
+
static void enable_datapath(struct s3c64xx_spi_driver_data *sdd,
struct spi_device *spi,
struct spi_transfer *xfer, int dma_mode)
@@ -713,9 +836,9 @@
}
/* Polling method for xfers not bigger than FIFO capacity */
- if (xfer->len <= ((FIFO_LVL_MASK(sdd) >> 1) + 1))
- use_dma = 0;
- else
+ use_dma = 0;
+ if (sdd->rx_dma.ch && sdd->tx_dma.ch &&
+ (xfer->len > ((FIFO_LVL_MASK(sdd) >> 1) + 1)))
use_dma = 1;
spin_lock_irqsave(&sdd->lock, flags);
@@ -750,10 +873,10 @@
if (use_dma) {
if (xfer->tx_buf != NULL
&& (sdd->state & TXBUSY))
- sdd->ops->stop(sdd->tx_dma.ch);
+ s3c64xx_spi_dma_stop(sdd, &sdd->tx_dma);
if (xfer->rx_buf != NULL
&& (sdd->state & RXBUSY))
- sdd->ops->stop(sdd->rx_dma.ch);
+ s3c64xx_spi_dma_stop(sdd, &sdd->rx_dma);
}
goto out;
@@ -790,32 +913,6 @@
return 0;
}
-static int s3c64xx_spi_prepare_transfer(struct spi_master *spi)
-{
- struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
-
- /* Acquire DMA channels */
- while (!acquire_dma(sdd))
- usleep_range(10000, 11000);
-
- pm_runtime_get_sync(&sdd->pdev->dev);
-
- return 0;
-}
-
-static int s3c64xx_spi_unprepare_transfer(struct spi_master *spi)
-{
- struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(spi);
-
- /* Free DMA channels */
- sdd->ops->release(sdd->rx_dma.ch, &s3c64xx_spi_dma_client);
- sdd->ops->release(sdd->tx_dma.ch, &s3c64xx_spi_dma_client);
-
- pm_runtime_put(&sdd->pdev->dev);
-
- return 0;
-}
-
static struct s3c64xx_spi_csinfo *s3c64xx_get_slave_ctrldata(
struct spi_device *spi)
{
diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h
index ceba18d..8447f63 100644
--- a/include/linux/platform_data/spi-s3c64xx.h
+++ b/include/linux/platform_data/spi-s3c64xx.h
@@ -11,6 +11,8 @@
#ifndef __S3C64XX_PLAT_SPI_H
#define __S3C64XX_PLAT_SPI_H
+#include <linux/dmaengine.h>
+
struct platform_device;
/**
@@ -38,6 +40,7 @@
int src_clk_nr;
int num_cs;
int (*cfg_gpio)(void);
+ dma_filter_fn filter;
};
/**