ftgmac100: Use device "compatible" property, not machine.
We test for aspeed chips to handle a couple of special cases,
but we do that by checking the machine type which isn't right.
Instead check the actual device compatible property. This also
updates the dtsi files for the aspeed SoC to match.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 0b4932c..6068e79 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -42,7 +42,7 @@
};
mac0: ethernet@1e660000 {
- compatible = "faraday,ftgmac100";
+ compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
reg = <0x1e660000 0x180>;
interrupts = <2>;
no-hw-checksum;
@@ -50,7 +50,7 @@
};
mac1: ethernet@1e680000 {
- compatible = "faraday,ftgmac100";
+ compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
reg = <0x1e680000 0x180>;
interrupts = <3>;
no-hw-checksum;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index b664fe3..4dbe91a 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -33,7 +33,7 @@
};
mac0: ethernet@1e660000 {
- compatible = "faraday,ftgmac100";
+ compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
reg = <0x1e660000 0x180>;
interrupts = <2>;
no-hw-checksum;
@@ -41,7 +41,7 @@
};
mac1: ethernet@1e680000 {
- compatible = "faraday,ftgmac100";
+ compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
reg = <0x1e680000 0x180>;
interrupts = <3>;
no-hw-checksum;
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 3994a83..e793d35 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -92,6 +92,7 @@
/* Misc */
bool need_mac_restart;
+ bool is_aspeed;
};
static void ftgmac100_set_rx_ring_base(struct ftgmac100 *priv, dma_addr_t addr)
@@ -1322,8 +1323,7 @@
if (!priv->mii_bus)
return -EIO;
- if (of_machine_is_compatible("aspeed,ast2400") ||
- of_machine_is_compatible("aspeed,ast2500")) {
+ if (priv->is_aspeed) {
/* This driver supports the old MDIO interface */
reg = ioread32(priv->base + FTGMAC100_OFFSET_REVR);
reg &= ~FTGMAC100_REVR_NEW_MDIO_INTERFACE;
@@ -1388,6 +1388,7 @@
int irq;
struct net_device *netdev;
struct ftgmac100 *priv;
+ struct device_node *np;
int err = 0;
if (!pdev)
@@ -1443,17 +1444,18 @@
/* MAC address from chip or random one */
ftgmac100_setup_mac(priv);
- if (of_machine_is_compatible("aspeed,ast2400") ||
- of_machine_is_compatible("aspeed,ast2500")) {
+ np = pdev->dev.of_node;
+ if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac") ||
+ of_device_is_compatible(np, "aspeed,ast2500-mac"))) {
priv->rxdes0_edorr_mask = BIT(30);
priv->txdes0_edotr_mask = BIT(30);
+ priv->is_aspeed = true;
} else {
priv->rxdes0_edorr_mask = BIT(15);
priv->txdes0_edotr_mask = BIT(15);
}
- if (pdev->dev.of_node &&
- of_get_property(pdev->dev.of_node, "use-ncsi", NULL)) {
+ if (np && of_get_property(np, "use-ncsi", NULL)) {
if (!IS_ENABLED(CONFIG_NET_NCSI)) {
dev_err(&pdev->dev, "NCSI stack not enabled\n");
goto err_ncsi_dev;
@@ -1478,7 +1480,7 @@
netdev->features = NETIF_F_RXCSUM | NETIF_F_HW_CSUM |
NETIF_F_GRO | NETIF_F_SG;
if (priv->use_ncsi &&
- of_get_property(pdev->dev.of_node, "no-hw-checksum", NULL))
+ of_get_property(np, "no-hw-checksum", NULL))
netdev->features &= ~NETIF_F_HW_CSUM;
/* register network device */