| config AGP |
| tristate "/dev/agpgart (AGP Support)" if !GART_IOMMU |
| depends on ALPHA || IA64 || PPC || X86 |
| default y if GART_IOMMU |
| ---help--- |
| AGP (Accelerated Graphics Port) is a bus system mainly used to |
| connect graphics cards to the rest of the system. |
| |
| If you have an AGP system and you say Y here, it will be possible to |
| use the AGP features of your 3D rendering video card. This code acts |
| as a sort of "AGP driver" for the motherboard's chipset. |
| |
| If you need more texture memory than you can get with the AGP GART |
| (theoretically up to 256 MB, but in practice usually 64 or 128 MB |
| due to kernel allocation issues), you could use PCI accesses |
| and have up to a couple gigs of texture space. |
| |
| Note that this is the only means to have XFree4/GLX use |
| write-combining with MTRR support on the AGP bus. Without it, OpenGL |
| direct rendering will be a lot slower but still faster than PIO. |
| |
| You should say Y here if you use XFree86 3.3.6 or 4.x and want to |
| use GLX or DRI. If unsure, say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called agpgart. |
| |
| config AGP_ALI |
| tristate "ALI chipset support" |
| depends on AGP && X86 && !X86_64 |
| ---help--- |
| This option gives you AGP support for the GLX component of |
| XFree86 4.x on the following ALi chipsets. The supported chipsets |
| include M1541, M1621, M1631, M1632, M1641,M1647,and M1651. |
| For the ALi-chipset question, ALi suggests you refer to |
| <http://www.ali.com.tw/eng/support/index.shtml>. |
| |
| The M1541 chipset can do AGP 1x and 2x, but note that there is an |
| acknowledged incompatibility with Matrox G200 cards. Due to |
| timing issues, this chipset cannot do AGP 2x with the G200. |
| This is a hardware limitation. AGP 1x seems to be fine, though. |
| |
| You should say Y here if you use XFree86 3.3.6 or 4.x and want to |
| use GLX or DRI. If unsure, say N. |
| |
| config AGP_ATI |
| tristate "ATI chipset support" |
| depends on AGP && X86 && !X86_64 |
| ---help--- |
| This option gives you AGP support for the GLX component of |
| XFree86 4.x on the ATI RadeonIGP family of chipsets. |
| |
| You should say Y here if you use XFree86 3.3.6 or 4.x and want to |
| use GLX or DRI. If unsure, say N. |
| |
| config AGP_AMD |
| tristate "AMD Irongate, 761, and 762 chipset support" |
| depends on AGP && X86 && !X86_64 |
| help |
| This option gives you AGP support for the GLX component of |
| XFree86 4.x on AMD Irongate, 761, and 762 chipsets. |
| |
| You should say Y here if you use XFree86 3.3.6 or 4.x and want to |
| use GLX or DRI. If unsure, say N. |
| |
| config AGP_AMD64 |
| tristate "AMD Opteron/Athlon64 on-CPU GART support" if !GART_IOMMU |
| depends on AGP && X86 |
| default y if GART_IOMMU |
| help |
| This option gives you AGP support for the GLX component of |
| XFree86 4.x using the on-CPU northbridge of the AMD Athlon64/Opteron CPUs. |
| You still need an external AGP bridge like the AMD 8151, VIA |
| K8T400M, SiS755. It may also support other AGP bridges when loaded |
| with agp_try_unsupported=1. |
| You should say Y here if you use XFree86 3.3.6 or 4.x and want to |
| use GLX or DRI. If unsure, say Y |
| |
| config AGP_INTEL |
| tristate "Intel 440LX/BX/GX, I8xx and E7x05 chipset support" |
| depends on AGP && X86 |
| help |
| This option gives you AGP support for the GLX component of XFree86 4.x |
| on Intel 440LX/BX/GX, 815, 820, 830, 840, 845, 850, 860, 875, |
| E7205 and E7505 chipsets and full support for the 810, 815, 830M, 845G, |
| 852GM, 855GM, 865G and I915 integrated graphics chipsets. |
| |
| You should say Y here if you use XFree86 3.3.6 or 4.x and want to |
| use GLX or DRI, or if you have any Intel integrated graphics |
| chipsets. If unsure, say Y. |
| |
| config AGP_NVIDIA |
| tristate "NVIDIA nForce/nForce2 chipset support" |
| depends on AGP && X86 && !X86_64 |
| help |
| This option gives you AGP support for the GLX component of |
| XFree86 4.x on the following NVIDIA chipsets. The supported chipsets |
| include nForce and nForce2 |
| |
| config AGP_SIS |
| tristate "SiS chipset support" |
| depends on AGP && X86 && !X86_64 |
| help |
| This option gives you AGP support for the GLX component of |
| XFree86 4.x on Silicon Integrated Systems [SiS] chipsets. |
| |
| Note that 5591/5592 AGP chipsets are NOT supported. |
| |
| You should say Y here if you use XFree86 3.3.6 or 4.x and want to |
| use GLX or DRI. If unsure, say N. |
| |
| config AGP_SWORKS |
| tristate "Serverworks LE/HE chipset support" |
| depends on AGP && X86 && !X86_64 |
| help |
| Say Y here to support the Serverworks AGP card. See |
| <http://www.serverworks.com/> for product descriptions and images. |
| |
| config AGP_VIA |
| tristate "VIA chipset support" |
| depends on AGP && X86 && !X86_64 |
| help |
| This option gives you AGP support for the GLX component of |
| XFree86 4.x on VIA MVP3/Apollo Pro chipsets. |
| |
| You should say Y here if you use XFree86 3.3.6 or 4.x and want to |
| use GLX or DRI. If unsure, say N. |
| |
| config AGP_I460 |
| tristate "Intel 460GX chipset support" |
| depends on AGP && (IA64_DIG || IA64_GENERIC) |
| help |
| This option gives you AGP GART support for the Intel 460GX chipset |
| for IA64 processors. |
| |
| config AGP_HP_ZX1 |
| tristate "HP ZX1 chipset AGP support" |
| depends on AGP && (IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_GENERIC) |
| help |
| This option gives you AGP GART support for the HP ZX1 chipset |
| for IA64 processors. |
| |
| config AGP_ALPHA_CORE |
| tristate "Alpha AGP support" |
| depends on AGP && (ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL) |
| default AGP |
| |
| config AGP_UNINORTH |
| tristate "Apple UniNorth & U3 AGP support" |
| depends on AGP && PPC_PMAC |
| help |
| This option gives you AGP support for Apple machines with a |
| UniNorth or U3 (Apple G5) bridge. |
| |
| config AGP_EFFICEON |
| tristate "Transmeta Efficeon support" |
| depends on AGP && X86 && !X86_64 |
| help |
| This option gives you AGP support for the Transmeta Efficeon |
| series processors with integrated northbridges. |
| |
| You should say Y here if you use XFree86 3.3.6 or 4.x and want to |
| use GLX or DRI. If unsure, say Y. |
| |
| config AGP_SGI_TIOCA |
| tristate "SGI TIO chipset AGP support" |
| depends on AGP && (IA64_SGI_SN2 || IA64_GENERIC) |
| help |
| This option gives you AGP GART support for the SGI TIO chipset |
| for IA64 processors. |
| |