dmaengine: edma: Rename bitfields for slot and channel usage tracking
The names chosen for the bitfields were quite confusing and given no real
information on what they are used for...
edma_inuse -> slot_inuse: tracks the slot usage/availability
edma_unused -> channel_unused: tracks the channel usage/availability
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 4b2ccc9..8d9169b 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -227,16 +227,16 @@
enum dma_event_q default_queue;
bool unused_chan_list_done;
- /* The edma_inuse bit for each PaRAM slot is clear unless the
+ /* The slot_inuse bit for each PaRAM slot is clear unless the
* channel is in use ... by ARM or DSP, for QDMA, or whatever.
*/
- unsigned long *edma_inuse;
+ unsigned long *slot_inuse;
- /* The edma_unused bit for each channel is clear unless
+ /* The channel_unused bit for each channel is clear unless
* it is not being used on this platform. It uses a bit
* of SOC-specific initialization code.
*/
- unsigned long *edma_unused;
+ unsigned long *channel_unused;
struct dma_device dma_slave;
struct edma_chan *slave_chans;
@@ -452,7 +452,7 @@
continue;
clear_bit(EDMA_CHAN_SLOT(dma_spec.args[0]),
- ecc->edma_unused);
+ ecc->channel_unused);
of_node_put(dma_spec.np);
}
return 0;
@@ -469,7 +469,7 @@
dma_req = (int)res->start;
if (dma_req >= dma_req_min && dma_req < dma_req_max)
clear_bit(EDMA_CHAN_SLOT(pdev->resource[i].start),
- ecc->edma_unused);
+ ecc->channel_unused);
}
return 0;
@@ -533,17 +533,17 @@
if (slot < 0) {
slot = ecc->num_channels;
for (;;) {
- slot = find_next_zero_bit(ecc->edma_inuse,
+ slot = find_next_zero_bit(ecc->slot_inuse,
ecc->num_slots,
slot);
if (slot == ecc->num_slots)
return -ENOMEM;
- if (!test_and_set_bit(slot, ecc->edma_inuse))
+ if (!test_and_set_bit(slot, ecc->slot_inuse))
break;
}
} else if (slot < ecc->num_channels || slot >= ecc->num_slots) {
return -EINVAL;
- } else if (test_and_set_bit(slot, ecc->edma_inuse)) {
+ } else if (test_and_set_bit(slot, ecc->slot_inuse)) {
return -EBUSY;
}
@@ -559,7 +559,7 @@
return;
edma_write_slot(ecc, slot, &dummy_paramset);
- clear_bit(slot, ecc->edma_inuse);
+ clear_bit(slot, ecc->slot_inuse);
}
/**
@@ -631,7 +631,7 @@
unsigned int mask = BIT(channel & 0x1f);
/* EDMA channels without event association */
- if (test_bit(channel, ecc->edma_unused)) {
+ if (test_bit(channel, ecc->channel_unused)) {
dev_dbg(ecc->dev, "ESR%d %08x\n", j,
edma_shadow0_read_array(ecc, SH_ESR, j));
edma_shadow0_write_array(ecc, SH_ESR, j, mask);
@@ -835,11 +835,11 @@
if (channel < 0) {
channel = 0;
for (;;) {
- channel = find_next_bit(ecc->edma_unused,
+ channel = find_next_bit(ecc->channel_unused,
ecc->num_channels, channel);
if (channel == ecc->num_channels)
break;
- if (!test_and_set_bit(channel, ecc->edma_inuse)) {
+ if (!test_and_set_bit(channel, ecc->slot_inuse)) {
done = 1;
break;
}
@@ -849,7 +849,7 @@
return -ENOMEM;
} else if (channel >= ecc->num_channels) {
return -EINVAL;
- } else if (test_and_set_bit(channel, ecc->edma_inuse)) {
+ } else if (test_and_set_bit(channel, ecc->slot_inuse)) {
return -EBUSY;
}
@@ -895,7 +895,7 @@
/* REVISIT should probably take out of shadow region 0 */
edma_write_slot(ecc, channel, &dummy_paramset);
- clear_bit(channel, ecc->edma_inuse);
+ clear_bit(channel, ecc->slot_inuse);
}
/* Move channel to a specific event queue */
@@ -2137,14 +2137,15 @@
if (!ecc->slave_chans)
return -ENOMEM;
- ecc->edma_unused = devm_kcalloc(dev, BITS_TO_LONGS(ecc->num_channels),
- sizeof(unsigned long), GFP_KERNEL);
- if (!ecc->edma_unused)
+ ecc->channel_unused = devm_kcalloc(dev,
+ BITS_TO_LONGS(ecc->num_channels),
+ sizeof(unsigned long), GFP_KERNEL);
+ if (!ecc->channel_unused)
return -ENOMEM;
- ecc->edma_inuse = devm_kcalloc(dev, BITS_TO_LONGS(ecc->num_slots),
+ ecc->slot_inuse = devm_kcalloc(dev, BITS_TO_LONGS(ecc->num_slots),
sizeof(unsigned long), GFP_KERNEL);
- if (!ecc->edma_inuse)
+ if (!ecc->slot_inuse)
return -ENOMEM;
ecc->default_queue = info->default_queue;
@@ -2153,7 +2154,7 @@
edma_write_slot(ecc, i, &dummy_paramset);
/* Mark all channels as unused */
- memset(ecc->edma_unused, 0xff, sizeof(ecc->edma_unused));
+ memset(ecc->channel_unused, 0xff, sizeof(ecc->channel_unused));
if (info->rsv) {
/* Clear the reserved channels in unused list */
@@ -2162,7 +2163,7 @@
for (i = 0; rsv_chans[i][0] != -1; i++) {
off = rsv_chans[i][0];
ln = rsv_chans[i][1];
- clear_bits(off, ln, ecc->edma_unused);
+ clear_bits(off, ln, ecc->channel_unused);
}
}
@@ -2172,7 +2173,7 @@
for (i = 0; rsv_slots[i][0] != -1; i++) {
off = rsv_slots[i][0];
ln = rsv_slots[i][1];
- set_bits(off, ln, ecc->edma_inuse);
+ set_bits(off, ln, ecc->slot_inuse);
}
}
}
@@ -2182,7 +2183,7 @@
if (xbar_chans) {
for (i = 0; xbar_chans[i][1] != -1; i++) {
off = xbar_chans[i][1];
- clear_bits(off, 1, ecc->edma_unused);
+ clear_bits(off, 1, ecc->channel_unused);
}
}
@@ -2301,7 +2302,7 @@
edma_direct_dmach_to_param_mapping(ecc);
for (i = 0; i < ecc->num_channels; i++) {
- if (test_bit(i, ecc->edma_inuse)) {
+ if (test_bit(i, ecc->slot_inuse)) {
/* ensure access through shadow region 0 */
edma_or_array2(ecc, EDMA_DRAE, 0, i >> 5,
BIT(i & 0x1f));