| /* |
| * simple driver for PWM (Pulse Width Modulator) controller |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com> |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/io.h> |
| #include <linux/pwm.h> |
| #include <mach/hardware.h> |
| |
| |
| /* i.MX1 and i.MX21 share the same PWM function block: */ |
| |
| #define MX1_PWMC 0x00 /* PWM Control Register */ |
| #define MX1_PWMS 0x04 /* PWM Sample Register */ |
| #define MX1_PWMP 0x08 /* PWM Period Register */ |
| |
| |
| /* i.MX27, i.MX31, i.MX35 share the same PWM function block: */ |
| |
| #define MX3_PWMCR 0x00 /* PWM Control Register */ |
| #define MX3_PWMSAR 0x0C /* PWM Sample Register */ |
| #define MX3_PWMPR 0x10 /* PWM Period Register */ |
| #define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) |
| #define MX3_PWMCR_DOZEEN (1 << 24) |
| #define MX3_PWMCR_WAITEN (1 << 23) |
| #define MX3_PWMCR_DBGEN (1 << 22) |
| #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) |
| #define MX3_PWMCR_CLKSRC_IPG (1 << 16) |
| #define MX3_PWMCR_EN (1 << 0) |
| |
| |
| |
| struct pwm_device { |
| struct list_head node; |
| struct platform_device *pdev; |
| |
| const char *label; |
| struct clk *clk; |
| |
| int clk_enabled; |
| void __iomem *mmio_base; |
| |
| unsigned int use_count; |
| unsigned int pwm_id; |
| }; |
| |
| int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) |
| { |
| if (pwm == NULL || period_ns == 0 || duty_ns > period_ns) |
| return -EINVAL; |
| |
| if (!(cpu_is_mx1() || cpu_is_mx21())) { |
| unsigned long long c; |
| unsigned long period_cycles, duty_cycles, prescale; |
| u32 cr; |
| |
| c = clk_get_rate(pwm->clk); |
| c = c * period_ns; |
| do_div(c, 1000000000); |
| period_cycles = c; |
| |
| prescale = period_cycles / 0x10000 + 1; |
| |
| period_cycles /= prescale; |
| c = (unsigned long long)period_cycles * duty_ns; |
| do_div(c, period_ns); |
| duty_cycles = c; |
| |
| writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR); |
| writel(period_cycles, pwm->mmio_base + MX3_PWMPR); |
| |
| cr = MX3_PWMCR_PRESCALER(prescale) | |
| MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | |
| MX3_PWMCR_DBGEN | MX3_PWMCR_EN; |
| |
| if (cpu_is_mx25()) |
| cr |= MX3_PWMCR_CLKSRC_IPG; |
| else |
| cr |= MX3_PWMCR_CLKSRC_IPG_HIGH; |
| |
| writel(cr, pwm->mmio_base + MX3_PWMCR); |
| } else if (cpu_is_mx1() || cpu_is_mx21()) { |
| /* The PWM subsystem allows for exact frequencies. However, |
| * I cannot connect a scope on my device to the PWM line and |
| * thus cannot provide the program the PWM controller |
| * exactly. Instead, I'm relying on the fact that the |
| * Bootloader (u-boot or WinCE+haret) has programmed the PWM |
| * function group already. So I'll just modify the PWM sample |
| * register to follow the ratio of duty_ns vs. period_ns |
| * accordingly. |
| * |
| * This is good enough for programming the brightness of |
| * the LCD backlight. |
| * |
| * The real implementation would divide PERCLK[0] first by |
| * both the prescaler (/1 .. /128) and then by CLKSEL |
| * (/2 .. /16). |
| */ |
| u32 max = readl(pwm->mmio_base + MX1_PWMP); |
| u32 p = max * duty_ns / period_ns; |
| writel(max - p, pwm->mmio_base + MX1_PWMS); |
| } else { |
| BUG(); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(pwm_config); |
| |
| int pwm_enable(struct pwm_device *pwm) |
| { |
| int rc = 0; |
| |
| if (!pwm->clk_enabled) { |
| rc = clk_enable(pwm->clk); |
| if (!rc) |
| pwm->clk_enabled = 1; |
| } |
| return rc; |
| } |
| EXPORT_SYMBOL(pwm_enable); |
| |
| void pwm_disable(struct pwm_device *pwm) |
| { |
| writel(0, pwm->mmio_base + MX3_PWMCR); |
| |
| if (pwm->clk_enabled) { |
| clk_disable(pwm->clk); |
| pwm->clk_enabled = 0; |
| } |
| } |
| EXPORT_SYMBOL(pwm_disable); |
| |
| static DEFINE_MUTEX(pwm_lock); |
| static LIST_HEAD(pwm_list); |
| |
| struct pwm_device *pwm_request(int pwm_id, const char *label) |
| { |
| struct pwm_device *pwm; |
| int found = 0; |
| |
| mutex_lock(&pwm_lock); |
| |
| list_for_each_entry(pwm, &pwm_list, node) { |
| if (pwm->pwm_id == pwm_id) { |
| found = 1; |
| break; |
| } |
| } |
| |
| if (found) { |
| if (pwm->use_count == 0) { |
| pwm->use_count++; |
| pwm->label = label; |
| } else |
| pwm = ERR_PTR(-EBUSY); |
| } else |
| pwm = ERR_PTR(-ENOENT); |
| |
| mutex_unlock(&pwm_lock); |
| return pwm; |
| } |
| EXPORT_SYMBOL(pwm_request); |
| |
| void pwm_free(struct pwm_device *pwm) |
| { |
| mutex_lock(&pwm_lock); |
| |
| if (pwm->use_count) { |
| pwm->use_count--; |
| pwm->label = NULL; |
| } else |
| pr_warning("PWM device already freed\n"); |
| |
| mutex_unlock(&pwm_lock); |
| } |
| EXPORT_SYMBOL(pwm_free); |
| |
| static int __devinit mxc_pwm_probe(struct platform_device *pdev) |
| { |
| struct pwm_device *pwm; |
| struct resource *r; |
| int ret = 0; |
| |
| pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL); |
| if (pwm == NULL) { |
| dev_err(&pdev->dev, "failed to allocate memory\n"); |
| return -ENOMEM; |
| } |
| |
| pwm->clk = clk_get(&pdev->dev, "pwm"); |
| |
| if (IS_ERR(pwm->clk)) { |
| ret = PTR_ERR(pwm->clk); |
| goto err_free; |
| } |
| |
| pwm->clk_enabled = 0; |
| |
| pwm->use_count = 0; |
| pwm->pwm_id = pdev->id; |
| pwm->pdev = pdev; |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (r == NULL) { |
| dev_err(&pdev->dev, "no memory resource defined\n"); |
| ret = -ENODEV; |
| goto err_free_clk; |
| } |
| |
| r = request_mem_region(r->start, resource_size(r), pdev->name); |
| if (r == NULL) { |
| dev_err(&pdev->dev, "failed to request memory resource\n"); |
| ret = -EBUSY; |
| goto err_free_clk; |
| } |
| |
| pwm->mmio_base = ioremap(r->start, resource_size(r)); |
| if (pwm->mmio_base == NULL) { |
| dev_err(&pdev->dev, "failed to ioremap() registers\n"); |
| ret = -ENODEV; |
| goto err_free_mem; |
| } |
| |
| mutex_lock(&pwm_lock); |
| list_add_tail(&pwm->node, &pwm_list); |
| mutex_unlock(&pwm_lock); |
| |
| platform_set_drvdata(pdev, pwm); |
| return 0; |
| |
| err_free_mem: |
| release_mem_region(r->start, resource_size(r)); |
| err_free_clk: |
| clk_put(pwm->clk); |
| err_free: |
| kfree(pwm); |
| return ret; |
| } |
| |
| static int __devexit mxc_pwm_remove(struct platform_device *pdev) |
| { |
| struct pwm_device *pwm; |
| struct resource *r; |
| |
| pwm = platform_get_drvdata(pdev); |
| if (pwm == NULL) |
| return -ENODEV; |
| |
| mutex_lock(&pwm_lock); |
| list_del(&pwm->node); |
| mutex_unlock(&pwm_lock); |
| |
| iounmap(pwm->mmio_base); |
| |
| r = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| release_mem_region(r->start, resource_size(r)); |
| |
| clk_put(pwm->clk); |
| |
| kfree(pwm); |
| return 0; |
| } |
| |
| static struct platform_driver mxc_pwm_driver = { |
| .driver = { |
| .name = "mxc_pwm", |
| }, |
| .probe = mxc_pwm_probe, |
| .remove = __devexit_p(mxc_pwm_remove), |
| }; |
| |
| static int __init mxc_pwm_init(void) |
| { |
| return platform_driver_register(&mxc_pwm_driver); |
| } |
| arch_initcall(mxc_pwm_init); |
| |
| static void __exit mxc_pwm_exit(void) |
| { |
| platform_driver_unregister(&mxc_pwm_driver); |
| } |
| module_exit(mxc_pwm_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>"); |