drivers/net/can/sja1000/peak_pci.c - kernel/msm-4.19 - Gitiles

 /*
  * Copyright (C) 2007, 2011 Wolfgang Grandegger <wg@grandegger.com>
  *
  * Derived from the PCAN project file driver/src/pcan_pci.c:
  *
  * Copyright (C) 2001-2006  PEAK System-Technik GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the version 2 of the GNU General Public License
  * as published by the Free Software Foundation
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  */

 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/netdevice.h>
 #include <linux/delay.h>
 #include <linux/pci.h>
 #include <linux/io.h>
 #include <linux/can.h>
 #include <linux/can/dev.h>

 #include "sja1000.h"

 MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
 MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI/PCIe cards");
 MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe CAN card");
 MODULE_LICENSE("GPL v2");

 #define DRV_NAME  "peak_pci"

 struct peak_pci_chan {
 	void __iomem *cfg_base;	     /* Common for all channels */
 	struct net_device *next_dev; /* Chain of network devices */
 	u16 icr_mask;		     /* Interrupt mask for fast ack */
 };

 #define PEAK_PCI_CAN_CLOCK	(16000000 / 2)

 #define PEAK_PCI_CDR		(CDR_CBP | CDR_CLKOUT_MASK)
 #define PEAK_PCI_OCR		OCR_TX0_PUSHPULL

 /*
  * Important PITA registers
  */
 #define PITA_ICR		0x00	/* Interrupt control register */
 #define PITA_GPIOICR		0x18	/* GPIO interface control register */
 #define PITA_MISC		0x1C	/* Miscellaneous register */

 #define PEAK_PCI_CFG_SIZE	0x1000	/* Size of the config PCI bar */
 #define PEAK_PCI_CHAN_SIZE	0x0400	/* Size used by the channel */

 #define PEAK_PCI_VENDOR_ID	0x001C	/* The PCI device and vendor IDs */
 #define PEAK_PCI_DEVICE_ID	0x0001	/* for PCI/PCIe slot cards */

 static const u16 peak_pci_icr_masks[] = {0x02, 0x01, 0x40, 0x80};

 static DEFINE_PCI_DEVICE_TABLE(peak_pci_tbl) = {
 	{PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
 	{0,}
 };

 MODULE_DEVICE_TABLE(pci, peak_pci_tbl);

 static u8 peak_pci_read_reg(const struct sja1000_priv *priv, int port)
 {
 	return readb(priv->reg_base + (port << 2));
 }

 static void peak_pci_write_reg(const struct sja1000_priv *priv,
 			       int port, u8 val)
 {
 	writeb(val, priv->reg_base + (port << 2));
 }

 static void peak_pci_post_irq(const struct sja1000_priv *priv)
 {
 	struct peak_pci_chan *chan = priv->priv;
 	u16 icr;

 	/* Select and clear in PITA stored interrupt */
 	icr = readw(chan->cfg_base + PITA_ICR);
 	if (icr & chan->icr_mask)
 		writew(chan->icr_mask, chan->cfg_base + PITA_ICR);
 }

 static int __devinit peak_pci_probe(struct pci_dev *pdev,
 				    const struct pci_device_id *ent)
 {
 	struct sja1000_priv *priv;
 	struct peak_pci_chan *chan;
 	struct net_device *dev, *dev0 = NULL;
 	void __iomem *cfg_base, *reg_base;
 	u16 sub_sys_id, icr;
 	int i, err, channels;

 	err = pci_enable_device(pdev);
 	if (err)
 		return err;

 	err = pci_request_regions(pdev, DRV_NAME);
 	if (err)
 		goto failure_disable_pci;

 	err = pci_read_config_word(pdev, 0x2e, &sub_sys_id);
 	if (err)
 		goto failure_release_regions;

 	dev_dbg(&pdev->dev, "probing device %04x:%04x:%04x\n",
 		pdev->vendor, pdev->device, sub_sys_id);

 	err = pci_write_config_word(pdev, 0x44, 0);
 	if (err)
 		goto failure_release_regions;

 	if (sub_sys_id >= 12)
 		channels = 4;
 	else if (sub_sys_id >= 10)
 		channels = 3;
 	else if (sub_sys_id >= 4)
 		channels = 2;
 	else
 		channels = 1;

 	cfg_base = pci_iomap(pdev, 0, PEAK_PCI_CFG_SIZE);
 	if (!cfg_base) {
 		dev_err(&pdev->dev, "failed to map PCI resource #0\n");
 		goto failure_release_regions;
 	}

 	reg_base = pci_iomap(pdev, 1, PEAK_PCI_CHAN_SIZE * channels);
 	if (!reg_base) {
 		dev_err(&pdev->dev, "failed to map PCI resource #1\n");
 		goto failure_unmap_cfg_base;
 	}

 	/* Set GPIO control register */
 	writew(0x0005, cfg_base + PITA_GPIOICR + 2);
 	/* Enable all channels of this card */
 	writeb(0x00, cfg_base + PITA_GPIOICR);
 	/* Toggle reset */
 	writeb(0x05, cfg_base + PITA_MISC + 3);
 	mdelay(5);
 	/* Leave parport mux mode */
 	writeb(0x04, cfg_base + PITA_MISC + 3);

 	icr = readw(cfg_base + PITA_ICR + 2);

 	for (i = 0; i < channels; i++) {
 		dev = alloc_sja1000dev(sizeof(struct peak_pci_chan));
 		if (!dev) {
 			err = -ENOMEM;
 			goto failure_remove_channels;
 		}

 		priv = netdev_priv(dev);
 		chan = priv->priv;

 		chan->cfg_base = cfg_base;
 		priv->reg_base = reg_base + i * PEAK_PCI_CHAN_SIZE;

 		priv->read_reg = peak_pci_read_reg;
 		priv->write_reg = peak_pci_write_reg;
 		priv->post_irq = peak_pci_post_irq;

 		priv->can.clock.freq = PEAK_PCI_CAN_CLOCK;
 		priv->ocr = PEAK_PCI_OCR;
 		priv->cdr = PEAK_PCI_CDR;
 		/* Neither a slave nor a single device distributes the clock */
 		if (channels == 1 || i > 0)
 			priv->cdr |= CDR_CLK_OFF;

 		/* Setup interrupt handling */
 		priv->irq_flags = IRQF_SHARED;
 		dev->irq = pdev->irq;

 		chan->icr_mask = peak_pci_icr_masks[i];
 		icr |= chan->icr_mask;

 		SET_NETDEV_DEV(dev, &pdev->dev);

 		err = register_sja1000dev(dev);
 		if (err) {
 			dev_err(&pdev->dev, "failed to register device\n");
 			free_sja1000dev(dev);
 			goto failure_remove_channels;
 		}

 		/* Create chain of SJA1000 devices */
 		if (i == 0)
 			dev0 = dev;
 		else
 			chan->next_dev = dev;

 		dev_info(&pdev->dev,
 			 "%s at reg_base=0x%p cfg_base=0x%p irq=%d\n",
 			 dev->name, priv->reg_base, chan->cfg_base, dev->irq);
 	}

 	pci_set_drvdata(pdev, dev0);

 	/* Enable interrupts */
 	writew(icr, cfg_base + PITA_ICR + 2);

 	return 0;

 failure_remove_channels:
 	/* Disable interrupts */
 	writew(0x0, cfg_base + PITA_ICR + 2);

 	for (dev = dev0; dev; dev = chan->next_dev) {
 		unregister_sja1000dev(dev);
 		free_sja1000dev(dev);
 		priv = netdev_priv(dev);
 		chan = priv->priv;
 		dev = chan->next_dev;
 	}

 	pci_iounmap(pdev, reg_base);

 failure_unmap_cfg_base:
 	pci_iounmap(pdev, cfg_base);

 failure_release_regions:
 	pci_release_regions(pdev);

 failure_disable_pci:
 	pci_disable_device(pdev);

 	return err;
 }

 static void __devexit peak_pci_remove(struct pci_dev *pdev)
 {
 	struct net_device *dev = pci_get_drvdata(pdev); /* First device */
 	struct sja1000_priv *priv = netdev_priv(dev);
 	struct peak_pci_chan *chan = priv->priv;
 	void __iomem *cfg_base = chan->cfg_base;
 	void __iomem *reg_base = priv->reg_base;

 	/* Disable interrupts */
 	writew(0x0, cfg_base + PITA_ICR + 2);

 	/* Loop over all registered devices */
 	while (1) {
 		dev_info(&pdev->dev, "removing device %s\n", dev->name);
 		unregister_sja1000dev(dev);
 		free_sja1000dev(dev);
 		dev = chan->next_dev;
 		if (!dev)
 			break;
 		priv = netdev_priv(dev);
 		chan = priv->priv;
 	}

 	pci_iounmap(pdev, reg_base);
 	pci_iounmap(pdev, cfg_base);
 	pci_release_regions(pdev);
 	pci_disable_device(pdev);

 	pci_set_drvdata(pdev, NULL);
 }

 static struct pci_driver peak_pci_driver = {
 	.name = DRV_NAME,
 	.id_table = peak_pci_tbl,
 	.probe = peak_pci_probe,
 	.remove = __devexit_p(peak_pci_remove),
 };

 static int __init peak_pci_init(void)
 {
 	return pci_register_driver(&peak_pci_driver);
 }
 module_init(peak_pci_init);

 static void __exit peak_pci_exit(void)
 {
 	pci_unregister_driver(&peak_pci_driver);
 }
 module_exit(peak_pci_exit);
	/*
	* Copyright (C) 2007, 2011 Wolfgang Grandegger <wg@grandegger.com>
	*
	* Derived from the PCAN project file driver/src/pcan_pci.c:
	*
	* Copyright (C) 2001-2006 PEAK System-Technik GmbH
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the version 2 of the GNU General Public License
	* as published by the Free Software Foundation
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software Foundation,
	* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
	*/

	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/interrupt.h>
	#include <linux/netdevice.h>
	#include <linux/delay.h>
	#include <linux/pci.h>
	#include <linux/io.h>
	#include <linux/can.h>
	#include <linux/can/dev.h>

	#include "sja1000.h"

	MODULE_AUTHOR("Wolfgang Grandegger <wg@grandegger.com>");
	MODULE_DESCRIPTION("Socket-CAN driver for PEAK PCAN PCI/PCIe cards");
	MODULE_SUPPORTED_DEVICE("PEAK PCAN PCI/PCIe CAN card");
	MODULE_LICENSE("GPL v2");

	#define DRV_NAME "peak_pci"

	struct peak_pci_chan {
	void __iomem cfg_base; / Common for all channels */
	struct net_device next_dev; / Chain of network devices */
	u16 icr_mask; /* Interrupt mask for fast ack */
	};

	#define PEAK_PCI_CAN_CLOCK (16000000 / 2)

	#define PEAK_PCI_CDR (CDR_CBP \| CDR_CLKOUT_MASK)
	#define PEAK_PCI_OCR OCR_TX0_PUSHPULL

	/*
	* Important PITA registers
	*/
	#define PITA_ICR 0x00 /* Interrupt control register */
	#define PITA_GPIOICR 0x18 /* GPIO interface control register */
	#define PITA_MISC 0x1C /* Miscellaneous register */

	#define PEAK_PCI_CFG_SIZE 0x1000 /* Size of the config PCI bar */
	#define PEAK_PCI_CHAN_SIZE 0x0400 /* Size used by the channel */

	#define PEAK_PCI_VENDOR_ID 0x001C /* The PCI device and vendor IDs */
	#define PEAK_PCI_DEVICE_ID 0x0001 /* for PCI/PCIe slot cards */

	static const u16 peak_pci_icr_masks[] = {0x02, 0x01, 0x40, 0x80};

	static DEFINE_PCI_DEVICE_TABLE(peak_pci_tbl) = {
	{PEAK_PCI_VENDOR_ID, PEAK_PCI_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,},
	{0,}
	};

	MODULE_DEVICE_TABLE(pci, peak_pci_tbl);

	static u8 peak_pci_read_reg(const struct sja1000_priv *priv, int port)
	{
	return readb(priv->reg_base + (port << 2));
	}

	static void peak_pci_write_reg(const struct sja1000_priv *priv,
	int port, u8 val)
	{
	writeb(val, priv->reg_base + (port << 2));
	}

	static void peak_pci_post_irq(const struct sja1000_priv *priv)
	{
	struct peak_pci_chan *chan = priv->priv;
	u16 icr;

	/* Select and clear in PITA stored interrupt */
	icr = readw(chan->cfg_base + PITA_ICR);
	if (icr & chan->icr_mask)
	writew(chan->icr_mask, chan->cfg_base + PITA_ICR);
	}

	static int __devinit peak_pci_probe(struct pci_dev *pdev,
	const struct pci_device_id *ent)
	{
	struct sja1000_priv *priv;
	struct peak_pci_chan *chan;
	struct net_device dev, dev0 = NULL;
	void __iomem cfg_base, reg_base;
	u16 sub_sys_id, icr;
	int i, err, channels;

	err = pci_enable_device(pdev);
	if (err)
	return err;

	err = pci_request_regions(pdev, DRV_NAME);
	if (err)
	goto failure_disable_pci;

	err = pci_read_config_word(pdev, 0x2e, &sub_sys_id);
	if (err)
	goto failure_release_regions;

	dev_dbg(&pdev->dev, "probing device %04x:%04x:%04x\n",
	pdev->vendor, pdev->device, sub_sys_id);

	err = pci_write_config_word(pdev, 0x44, 0);
	if (err)
	goto failure_release_regions;

	if (sub_sys_id >= 12)
	channels = 4;
	else if (sub_sys_id >= 10)
	channels = 3;
	else if (sub_sys_id >= 4)
	channels = 2;
	else
	channels = 1;

	cfg_base = pci_iomap(pdev, 0, PEAK_PCI_CFG_SIZE);
	if (!cfg_base) {
	dev_err(&pdev->dev, "failed to map PCI resource #0\n");
	goto failure_release_regions;
	}

	reg_base = pci_iomap(pdev, 1, PEAK_PCI_CHAN_SIZE * channels);
	if (!reg_base) {
	dev_err(&pdev->dev, "failed to map PCI resource #1\n");
	goto failure_unmap_cfg_base;
	}

	/* Set GPIO control register */
	writew(0x0005, cfg_base + PITA_GPIOICR + 2);
	/* Enable all channels of this card */
	writeb(0x00, cfg_base + PITA_GPIOICR);
	/* Toggle reset */
	writeb(0x05, cfg_base + PITA_MISC + 3);
	mdelay(5);
	/* Leave parport mux mode */
	writeb(0x04, cfg_base + PITA_MISC + 3);

	icr = readw(cfg_base + PITA_ICR + 2);

	for (i = 0; i < channels; i++) {
	dev = alloc_sja1000dev(sizeof(struct peak_pci_chan));
	if (!dev) {
	err = -ENOMEM;
	goto failure_remove_channels;
	}

	priv = netdev_priv(dev);
	chan = priv->priv;

	chan->cfg_base = cfg_base;
	priv->reg_base = reg_base + i * PEAK_PCI_CHAN_SIZE;

	priv->read_reg = peak_pci_read_reg;
	priv->write_reg = peak_pci_write_reg;
	priv->post_irq = peak_pci_post_irq;

	priv->can.clock.freq = PEAK_PCI_CAN_CLOCK;
	priv->ocr = PEAK_PCI_OCR;
	priv->cdr = PEAK_PCI_CDR;
	/* Neither a slave nor a single device distributes the clock */
	if (channels == 1 \|\| i > 0)
	priv->cdr \|= CDR_CLK_OFF;

	/* Setup interrupt handling */
	priv->irq_flags = IRQF_SHARED;
	dev->irq = pdev->irq;

	chan->icr_mask = peak_pci_icr_masks[i];
	icr \|= chan->icr_mask;

	SET_NETDEV_DEV(dev, &pdev->dev);

	err = register_sja1000dev(dev);
	if (err) {
	dev_err(&pdev->dev, "failed to register device\n");
	free_sja1000dev(dev);
	goto failure_remove_channels;
	}

	/* Create chain of SJA1000 devices */
	if (i == 0)
	dev0 = dev;
	else
	chan->next_dev = dev;

	dev_info(&pdev->dev,
	"%s at reg_base=0x%p cfg_base=0x%p irq=%d\n",
	dev->name, priv->reg_base, chan->cfg_base, dev->irq);
	}

	pci_set_drvdata(pdev, dev0);

	/* Enable interrupts */
	writew(icr, cfg_base + PITA_ICR + 2);

	return 0;

	failure_remove_channels:
	/* Disable interrupts */
	writew(0x0, cfg_base + PITA_ICR + 2);

	for (dev = dev0; dev; dev = chan->next_dev) {
	unregister_sja1000dev(dev);
	free_sja1000dev(dev);
	priv = netdev_priv(dev);
	chan = priv->priv;
	dev = chan->next_dev;
	}

	pci_iounmap(pdev, reg_base);

	failure_unmap_cfg_base:
	pci_iounmap(pdev, cfg_base);

	failure_release_regions:
	pci_release_regions(pdev);

	failure_disable_pci:
	pci_disable_device(pdev);

	return err;
	}

	static void __devexit peak_pci_remove(struct pci_dev *pdev)
	{
	struct net_device dev = pci_get_drvdata(pdev); / First device */
	struct sja1000_priv *priv = netdev_priv(dev);
	struct peak_pci_chan *chan = priv->priv;
	void __iomem *cfg_base = chan->cfg_base;
	void __iomem *reg_base = priv->reg_base;

	/* Disable interrupts */
	writew(0x0, cfg_base + PITA_ICR + 2);

	/* Loop over all registered devices */
	while (1) {
	dev_info(&pdev->dev, "removing device %s\n", dev->name);
	unregister_sja1000dev(dev);
	free_sja1000dev(dev);
	dev = chan->next_dev;
	if (!dev)
	break;
	priv = netdev_priv(dev);
	chan = priv->priv;
	}

	pci_iounmap(pdev, reg_base);
	pci_iounmap(pdev, cfg_base);
	pci_release_regions(pdev);
	pci_disable_device(pdev);

	pci_set_drvdata(pdev, NULL);
	}

	static struct pci_driver peak_pci_driver = {
	.name = DRV_NAME,
	.id_table = peak_pci_tbl,
	.probe = peak_pci_probe,
	.remove = __devexit_p(peak_pci_remove),
	};

	static int __init peak_pci_init(void)
	{
	return pci_register_driver(&peak_pci_driver);
	}
	module_init(peak_pci_init);

	static void __exit peak_pci_exit(void)
	{
	pci_unregister_driver(&peak_pci_driver);
	}
	module_exit(peak_pci_exit);