mtd: docg3: map erase and write functions
Map the developped write and erase functions into the mtd
structure.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Ivan Djelic <ivan.djelic@parrot.com>
Reviewed-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index 3087b15..1f949ea 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -41,8 +41,6 @@
*
* As no specification is available from M-Systems/Sandisk, this drivers lacks
* several functions available on the chip, as :
- * - block erase
- * - page write
* - IPL write
* - ECC fixing (lack of BCH algorith understanding)
* - powerdown / powerup
@@ -1586,23 +1584,19 @@
break;
}
mtd->type = MTD_NANDFLASH;
- /*
- * Once write methods are added, the correct flags will be set.
- * mtd->flags = MTD_CAP_NANDFLASH;
- */
- mtd->flags = MTD_CAP_ROM;
+ mtd->flags = MTD_CAP_NANDFLASH;
mtd->size = (docg3->max_block + 1) * DOC_LAYOUT_BLOCK_SIZE;
mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES;
mtd->writesize = DOC_LAYOUT_PAGE_SIZE;
mtd->oobsize = DOC_LAYOUT_OOB_SIZE;
mtd->owner = THIS_MODULE;
- mtd->erase = NULL;
+ mtd->erase = doc_erase;
mtd->point = NULL;
mtd->unpoint = NULL;
mtd->read = doc_read;
- mtd->write = NULL;
+ mtd->write = doc_write;
mtd->read_oob = doc_read_oob;
- mtd->write_oob = NULL;
+ mtd->write_oob = doc_write_oob;
mtd->sync = NULL;
mtd->block_isbad = doc_block_isbad;
mtd->ecclayout = &docg3_oobinfo;