ARM: dts: imx53: make pinctrl nodes board specific
Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that
boards that share the same pinctrl setting do not have to define it time
and time again in <board>.dts. However, along with the devices and use
cases being added continuously, the pinctrl setting nodes under iomuxc
becomes more than expected. This bloats device tree blob for particular
board unnecessarily since only a small subset of those pinctrl setting
nodes will be used by the board. It impacts not only the DTB file size
but also the run-time device tree lookup efficiency.
The patch moves all the pinctrl data into individual boards as needed.
With the changes, the pinctrl setting nodes becomes local to particular
board, and it makes no sense to continue numbering the setting for
given peripheral. Thus, all the pinctrl phandler name gets updated to
have only peripheral name in there.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index a9b6e10..5ec1590 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -40,7 +40,7 @@
&esdhc1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1_1>;
+ pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio3 13 0>;
wp-gpios = <&gpio4 11 0>;
status = "okay";
@@ -48,21 +48,21 @@
&esdhc2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc2_1>;
+ pinctrl-0 = <&pinctrl_esdhc2>;
non-removable;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart3_1>;
+ pinctrl-0 = <&pinctrl_uart3>;
fsl,uart-has-rtscts;
status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi1_1>;
+ pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
status = "okay";
@@ -95,7 +95,7 @@
&esdhc3 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc3_1>;
+ pinctrl-0 = <&pinctrl_esdhc3>;
non-removable;
status = "okay";
};
@@ -104,7 +104,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
- hog {
+ imx53-smd {
pinctrl_hog: hoggrp {
fsl,pins = <
MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000
@@ -116,24 +116,121 @@
MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
>;
};
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX53_PAD_EIM_D16__ECSPI1_SCLK 0x80000000
+ MX53_PAD_EIM_D17__ECSPI1_MISO 0x80000000
+ MX53_PAD_EIM_D18__ECSPI1_MOSI 0x80000000
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX53_PAD_SD1_DATA0__ESDHC1_DAT0 0x1d5
+ MX53_PAD_SD1_DATA1__ESDHC1_DAT1 0x1d5
+ MX53_PAD_SD1_DATA2__ESDHC1_DAT2 0x1d5
+ MX53_PAD_SD1_DATA3__ESDHC1_DAT3 0x1d5
+ MX53_PAD_SD1_CMD__ESDHC1_CMD 0x1d5
+ MX53_PAD_SD1_CLK__ESDHC1_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_esdhc2: esdhc2grp {
+ fsl,pins = <
+ MX53_PAD_SD2_CMD__ESDHC2_CMD 0x1d5
+ MX53_PAD_SD2_CLK__ESDHC2_CLK 0x1d5
+ MX53_PAD_SD2_DATA0__ESDHC2_DAT0 0x1d5
+ MX53_PAD_SD2_DATA1__ESDHC2_DAT1 0x1d5
+ MX53_PAD_SD2_DATA2__ESDHC2_DAT2 0x1d5
+ MX53_PAD_SD2_DATA3__ESDHC2_DAT3 0x1d5
+ >;
+ };
+
+ pinctrl_esdhc3: esdhc3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_DATA8__ESDHC3_DAT0 0x1d5
+ MX53_PAD_PATA_DATA9__ESDHC3_DAT1 0x1d5
+ MX53_PAD_PATA_DATA10__ESDHC3_DAT2 0x1d5
+ MX53_PAD_PATA_DATA11__ESDHC3_DAT3 0x1d5
+ MX53_PAD_PATA_DATA0__ESDHC3_DAT4 0x1d5
+ MX53_PAD_PATA_DATA1__ESDHC3_DAT5 0x1d5
+ MX53_PAD_PATA_DATA2__ESDHC3_DAT6 0x1d5
+ MX53_PAD_PATA_DATA3__ESDHC3_DAT7 0x1d5
+ MX53_PAD_PATA_RESET_B__ESDHC3_CMD 0x1d5
+ MX53_PAD_PATA_IORDY__ESDHC3_CLK 0x1d5
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX53_PAD_FEC_MDC__FEC_MDC 0x80000000
+ MX53_PAD_FEC_MDIO__FEC_MDIO 0x80000000
+ MX53_PAD_FEC_REF_CLK__FEC_TX_CLK 0x80000000
+ MX53_PAD_FEC_RX_ER__FEC_RX_ER 0x80000000
+ MX53_PAD_FEC_CRS_DV__FEC_RX_DV 0x80000000
+ MX53_PAD_FEC_RXD1__FEC_RDATA_1 0x80000000
+ MX53_PAD_FEC_RXD0__FEC_RDATA_0 0x80000000
+ MX53_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
+ MX53_PAD_FEC_TXD1__FEC_TDATA_1 0x80000000
+ MX53_PAD_FEC_TXD0__FEC_TDATA_0 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT8__I2C1_SDA 0xc0000000
+ MX53_PAD_CSI0_DAT9__I2C1_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
+ MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
+ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DMARQ__UART2_TXD_MUX 0x1e4
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX53_PAD_PATA_CS_0__UART3_TXD_MUX 0x1e4
+ MX53_PAD_PATA_CS_1__UART3_RXD_MUX 0x1e4
+ MX53_PAD_PATA_DA_1__UART3_CTS 0x1e4
+ MX53_PAD_PATA_DA_2__UART3_RTS 0x1e4
+ >;
+ };
};
};
&uart1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1_1>;
+ pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2_1>;
+ pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_1>;
+ pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
codec: sgtl5000@0a {
@@ -154,7 +251,7 @@
&i2c1 {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_1>;
+ pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
accelerometer: mma8450@1c {
@@ -175,7 +272,7 @@
&fec {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec_1>;
+ pinctrl-0 = <&pinctrl_fec>;
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";