Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix ARM BPF JIT handling of negative 'k' values, from Chen Gang.
2) Insufficient space reserved for bridge netlink values, fix from
Stephen Hemminger.
3) Some dst_neigh_lookup*() callers don't interpret error pointer
correctly, fix from Zhouyi Zhou.
4) Fix transport match in SCTP active_path loops, from Xugeng Zhang.
5) Fix qeth driver handling of multi-order SKB frags, from Frank
Blaschka.
6) fec driver is missing napi_disable() call, resulting in crashes on
unload, from Georg Hofmann.
7) Don't try to handle PMTU events on a listening socket, fix from Eric
Dumazet.
8) Fix timestamp location calculations in IP option processing, from
David Ward.
9) FIB_TABLE_HASHSZ setting is not controlled by the correct kconfig
tests, from Denis V Lunev.
10) Fix TX descriptor push handling in SFC driver, from Ben Hutchings.
11) Fix isdn/hisax and tulip/de4x5 kconfig dependencies, from Arnd
Bergmann.
12) bnx2x statistics don't handle 4GB rollover correctly, fix from
Maciej Żenczykowski.
13) Openvswitch bug fixes for vport del/new error reporting, missing
genlmsg_end() call in netlink processing, and mis-parsing of
LLC/SNAP ethernet types. From Rich Lane.
14) SKB pfmemalloc state should only be propagated from the head page of
a compound page, fix from Pavel Emelyanov.
15) Fix link handling in tg3 driver for 5715 chips when autonegotation
is disabled. From Nithin Sujir.
16) Fix inverted test of cpdma_check_free_tx_desc return value in
davinci_emac driver, from Mugunthan V N.
17) vlan_depth is incorrectly calculated in skb_network_protocol(), from
Li RongQing.
18) Fix probing of Gobi 1K devices in qmi_wwan driver, and fix NCM
device mode backwards compat in cdc_ncm driver. From Bjørn Mork.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
inet: limit length of fragment queue hash table bucket lists
qeth: Fix scatter-gather regression
qeth: Fix invalid router settings handling
qeth: delay feature trace
tcp: dont handle MTU reduction on LISTEN socket
bnx2x: fix occasional statistics off-by-4GB error
vhost/net: fix heads usage of ubuf_info
bridge: Add support for setting BR_ROOT_BLOCK flag.
bnx2x: add missing napi deletion in error path
drivers: net: ethernet: ti: davinci_emac: fix usage of cpdma_check_free_tx_desc()
ethernet/tulip: DE4x5 needs VIRT_TO_BUS
isdn: hisax: netjet requires VIRT_TO_BUS
net: cdc_ncm, cdc_mbim: allow user to prefer NCM for backwards compatibility
rtnetlink: Mask the rta_type when range checking
Revert "ip_gre: make ipgre_tunnel_xmit() not parse network header as IP unconditionally"
Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug
smsc75xx: configuration help incorrectly mentions smsc95xx
net: fec: fix missing napi_disable call
net: fec: restart the FEC when PHY speed changes
skb: Propagate pfmemalloc on skb from head page only
...
diff --git a/CREDITS b/CREDITS
index 78163cb..afaa7ce 100644
--- a/CREDITS
+++ b/CREDITS
@@ -1510,6 +1510,14 @@
D: Cobalt Networks (x86) support
D: This-and-That
+N: Mark M. Hoffman
+E: mhoffman@lightlink.com
+D: asb100, lm93 and smsc47b397 hardware monitoring drivers
+D: hwmon subsystem core
+D: hwmon subsystem maintainer
+D: i2c-sis96x and i2c-stub SMBus drivers
+S: USA
+
N: Dirk Hohndel
E: hohndel@suse.de
D: The XFree86[tm] Project
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
index 13b707b..c3a14e0 100644
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -13,9 +13,6 @@
4 = active high level-sensitive
8 = active low level-sensitive
-Optional parent device properties:
-- reg : contains the PRCMU mailbox address for the AB8500 i2c port
-
The AB8500 consists of a large and varied group of sub-devices:
Device IRQ Names Supply Names Description
@@ -86,9 +83,8 @@
- stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic
- stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580)
-ab8500@5 {
+ab8500 {
compatible = "stericsson,ab8500";
- reg = <5>; /* mailbox 5 is i2c */
interrupts = <0 40 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
index 1e1145c..8f01cb1 100644
--- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -11,6 +11,9 @@
- "nvidia,tegra20-uart"
- "nxp,lpc3220-uart"
- "ibm,qpace-nwp-serial"
+ - "altr,16550-FIFO32"
+ - "altr,16550-FIFO64"
+ - "altr,16550-FIFO128"
- "serial" if the port type is unknown.
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.
diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75
index c91a1d1..69af1c7 100644
--- a/Documentation/hwmon/lm75
+++ b/Documentation/hwmon/lm75
@@ -23,7 +23,7 @@
Datasheet: Publicly available at the Maxim website
http://www.maxim-ic.com/
* Microchip (TelCom) TCN75
- Prefix: 'lm75'
+ Prefix: 'tcn75'
Addresses scanned: none
Datasheet: Publicly available at the Microchip website
http://www.microchip.com/
diff --git a/MAINTAINERS b/MAINTAINERS
index c08411b..fb89be1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1338,12 +1338,6 @@
F: drivers/platform/x86/asus*.c
F: drivers/platform/x86/eeepc*.c
-ASUS ASB100 HARDWARE MONITOR DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
-L: lm-sensors@lm-sensors.org
-S: Maintained
-F: drivers/hwmon/asb100.c
-
ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
M: Dan Williams <djbw@fb.com>
W: http://sourceforge.net/projects/xscaleiop
@@ -3851,7 +3845,7 @@
F: Documentation/i2c/busses/i2c-ismt
I2C/SMBUS STUB DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
+M: Jean Delvare <khali@linux-fr.org>
L: linux-i2c@vger.kernel.org
S: Maintained
F: drivers/i2c/i2c-stub.c
@@ -4005,6 +3999,22 @@
S: Maintained
F: drivers/usb/atm/ueagle-atm.c
+INA209 HARDWARE MONITOR DRIVER
+M: Guenter Roeck <linux@roeck-us.net>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/ina209
+F: Documentation/devicetree/bindings/i2c/ina209.txt
+F: drivers/hwmon/ina209.c
+
+INA2XX HARDWARE MONITOR DRIVER
+M: Guenter Roeck <linux@roeck-us.net>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/ina2xx
+F: drivers/hwmon/ina2xx.c
+F: include/linux/platform_data/ina2xx.h
+
INDUSTRY PACK SUBSYSTEM (IPACK)
M: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
M: Jens Taprogge <jens.taprogge@taprogge.org>
@@ -5098,6 +5108,15 @@
F: Documentation/hwmon/max6650
F: drivers/hwmon/max6650.c
+MAX6697 HARDWARE MONITOR DRIVER
+M: Guenter Roeck <linux@roeck-us.net>
+L: lm-sensors@lm-sensors.org
+S: Maintained
+F: Documentation/hwmon/max6697
+F: Documentation/devicetree/bindings/i2c/max6697.txt
+F: drivers/hwmon/max6697.c
+F: include/linux/platform_data/max6697.h
+
MAXIRADIO FM RADIO RECEIVER DRIVER
M: Hans Verkuil <hverkuil@xs4all.nl>
L: linux-media@vger.kernel.org
@@ -7173,13 +7192,6 @@
S: Maintained
F: drivers/net/ethernet/sis/sis900.*
-SIS 96X I2C/SMBUS DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
-L: linux-i2c@vger.kernel.org
-S: Maintained
-F: Documentation/i2c/busses/i2c-sis96x
-F: drivers/i2c/busses/i2c-sis96x.c
-
SIS FRAMEBUFFER DRIVER
M: Thomas Winischhofer <thomas@winischhofer.net>
W: http://www.winischhofer.net/linuxsisvga.shtml
@@ -7257,7 +7269,7 @@
F: drivers/hwmon/sch5627.c
SMSC47B397 HARDWARE MONITOR DRIVER
-M: "Mark M. Hoffman" <mhoffman@lightlink.com>
+M: Jean Delvare <khali@linux-fr.org>
L: lm-sensors@lm-sensors.org
S: Maintained
F: Documentation/hwmon/smsc47b397
diff --git a/Makefile b/Makefile
index a05ea42..22113a7 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 9
SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
NAME = Unicycling Gorilla
# *DOCUMENTATION*
diff --git a/arch/Kconfig b/arch/Kconfig
index 5a1779c..1455579 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -319,13 +319,6 @@
select ARCH_WANT_COMPAT_IPC_PARSE_VERSION
bool
-config HAVE_VIRT_TO_BUS
- bool
- help
- An architecture should select this if it implements the
- deprecated interface virt_to_bus(). All new architectures
- should probably not select this.
-
config HAVE_ARCH_SECCOMP_FILTER
bool
help
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 5833aa4..8a33ba0 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -9,7 +9,7 @@
select HAVE_PERF_EVENTS
select HAVE_DMA_ATTRS
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_IRQ_SHOW
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5b71469..13b7394 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -49,7 +49,6 @@
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
select KTIME_SCALAR
select PERF_USE_VMALLOC
select RTC_LIB
@@ -556,7 +555,6 @@
config ARCH_DOVE
bool "Marvell Dove"
select ARCH_REQUIRE_GPIOLIB
- select COMMON_CLK_DOVE
select CPU_V7
select GENERIC_CLOCKEVENTS
select MIGHT_HAVE_PCI
@@ -744,6 +742,7 @@
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select NO_IOPORT
+ select VIRT_TO_BUS
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -879,6 +878,7 @@
select ISA_DMA
select NEED_MACH_MEMORY_H
select PCI
+ select VIRT_TO_BUS
select ZONE_DMA
help
Support for the StrongARM based Digital DNARD machine, also known
@@ -1006,12 +1006,12 @@
bool
config ARCH_MULTI_V6
- bool "ARMv6 based platforms (ARM11, Scorpion, ...)"
+ bool "ARMv6 based platforms (ARM11)"
select ARCH_MULTI_V6_V7
select CPU_V6
config ARCH_MULTI_V7
- bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)"
+ bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
default y
select ARCH_MULTI_V6_V7
select ARCH_VEXPRESS
@@ -1462,10 +1462,6 @@
bool
select ISA_DMA_API
-config ARCH_NO_VIRT_TO_BUS
- def_bool y
- depends on !ARCH_RPC && !ARCH_NETWINDER && !ARCH_SHARK
-
# Select ISA DMA interface
config ISA_DMA_API
bool
@@ -1657,13 +1653,16 @@
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
+# The GPIO number here must be sorted by descending number. In case of
+# a multiplatform kernel, we just want the highest value required by the
+# selected platforms.
config ARCH_NR_GPIO
int
default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
- default 355 if ARCH_U8500
- default 264 if MACH_H4700
default 512 if SOC_OMAP5
+ default 355 if ARCH_U8500
default 288 if ARCH_VT8500 || ARCH_SUNXI
+ default 264 if MACH_H4700
default 0
help
Maximum number of GPIOs in the system.
@@ -1887,8 +1886,9 @@
config XEN
bool "Xen guest support on ARM (EXPERIMENTAL)"
- depends on ARM && OF
+ depends on ARM && AEABI && OF
depends on CPU_V7 && !CPU_V6
+ depends on !GENERIC_ATOMIC64
help
Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index acdddda..ecfcdba 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -492,7 +492,7 @@
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX51_UART || \
- DEBUG_IMX50_IMX53_UART || \
+ DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART
default 1
help
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 71768b8..84aa2ca 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -115,4 +115,4 @@
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \
$(obj)/Image System.map "$(INSTALL_PATH)"
-subdir- := bootp compressed
+subdir- := bootp compressed dts
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index f8e4855..070bba4 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -64,5 +64,13 @@
status = "okay";
/* No CD or WP GPIOs */
};
+
+ usb@d0050000 {
+ status = "okay";
+ };
+
+ usb@d0051000 {
+ status = "okay";
+ };
};
};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 6f1acc7..5b70820 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -31,7 +31,6 @@
mpic: interrupt-controller@d0020000 {
compatible = "marvell,mpic";
#interrupt-cells = <1>;
- #address-cells = <1>;
#size-cells = <1>;
interrupt-controller;
};
@@ -54,7 +53,7 @@
reg = <0xd0012000 0x100>;
reg-shift = <2>;
interrupts = <41>;
- reg-io-width = <4>;
+ reg-io-width = <1>;
status = "disabled";
};
serial@d0012100 {
@@ -62,7 +61,7 @@
reg = <0xd0012100 0x100>;
reg-shift = <2>;
interrupts = <42>;
- reg-io-width = <4>;
+ reg-io-width = <1>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 1443949..ca00d83 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -46,7 +46,7 @@
reg = <0xd0012200 0x100>;
reg-shift = <2>;
interrupts = <43>;
- reg-io-width = <4>;
+ reg-io-width = <1>;
status = "disabled";
};
serial@d0012300 {
@@ -54,7 +54,7 @@
reg = <0xd0012300 0x100>;
reg-shift = <2>;
interrupts = <44>;
- reg-io-width = <4>;
+ reg-io-width = <1>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index aa98e64..a98c0d5 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -238,8 +238,32 @@
nand {
pinctrl_nand: nand-0 {
atmel,pins =
- <3 4 0x0 0x1 /* PD5 gpio RDY pin pull_up */
- 3 5 0x0 0x1>; /* PD4 gpio enable pin pull_up */
+ <3 0 0x1 0x0 /* PD0 periph A Read Enable */
+ 3 1 0x1 0x0 /* PD1 periph A Write Enable */
+ 3 2 0x1 0x0 /* PD2 periph A Address Latch Enable */
+ 3 3 0x1 0x0 /* PD3 periph A Command Latch Enable */
+ 3 4 0x0 0x1 /* PD4 gpio Chip Enable pin pull_up */
+ 3 5 0x0 0x1 /* PD5 gpio RDY/BUSY pin pull_up */
+ 3 6 0x1 0x0 /* PD6 periph A Data bit 0 */
+ 3 7 0x1 0x0 /* PD7 periph A Data bit 1 */
+ 3 8 0x1 0x0 /* PD8 periph A Data bit 2 */
+ 3 9 0x1 0x0 /* PD9 periph A Data bit 3 */
+ 3 10 0x1 0x0 /* PD10 periph A Data bit 4 */
+ 3 11 0x1 0x0 /* PD11 periph A Data bit 5 */
+ 3 12 0x1 0x0 /* PD12 periph A Data bit 6 */
+ 3 13 0x1 0x0>; /* PD13 periph A Data bit 7 */
+ };
+
+ pinctrl_nand_16bits: nand_16bits-0 {
+ atmel,pins =
+ <3 14 0x1 0x0 /* PD14 periph A Data bit 8 */
+ 3 15 0x1 0x0 /* PD15 periph A Data bit 9 */
+ 3 16 0x1 0x0 /* PD16 periph A Data bit 10 */
+ 3 17 0x1 0x0 /* PD17 periph A Data bit 11 */
+ 3 18 0x1 0x0 /* PD18 periph A Data bit 12 */
+ 3 19 0x1 0x0 /* PD19 periph A Data bit 13 */
+ 3 20 0x1 0x0 /* PD20 periph A Data bit 14 */
+ 3 21 0x1 0x0>; /* PD21 periph A Data bit 15 */
};
};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 4bf2a87..7e0481e 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -105,7 +105,7 @@
compatible = "fixed-clock";
reg = <1>;
#clock-cells = <0>;
- clock-frequency = <150000000>;
+ clock-frequency = <250000000>;
};
};
};
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 69140ba..9de9309 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -319,9 +319,8 @@
};
};
- ab8500@5 {
+ ab8500 {
compatible = "stericsson,ab8500";
- reg = <5>; /* mailbox 5 is i2c */
interrupt-parent = <&intc>;
interrupts = <0 40 0x4>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 67dbe20..f7509ca 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -197,6 +197,11 @@
status = "disabled";
};
+ rtc@d8500 {
+ compatible = "marvell,orion-rtc";
+ reg = <0xd8500 0x20>;
+ };
+
crypto: crypto@30000 {
compatible = "marvell,orion-crypto";
reg = <0x30000 0x10000>,
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index e1347fc..1a62bcf 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -275,18 +275,27 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
interrupts = <0 35 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
pdma1: pdma@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
interrupts = <0 36 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
mdma1: mdma@12850000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
interrupts = <0 34 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <1>;
};
};
};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index 5f3562a..9a99755 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -142,12 +142,18 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0x120000 0x1000>;
interrupts = <0 34 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
pdma1: pdma@121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121000 0x1000>;
interrupts = <0 35 0>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
};
diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/href.dtsi
index 592fb9d..379128e 100644
--- a/arch/arm/boot/dts/href.dtsi
+++ b/arch/arm/boot/dts/href.dtsi
@@ -221,7 +221,7 @@
};
};
- ab8500@5 {
+ ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts
index 55f4191..2b587a7 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/hrefv60plus.dts
@@ -158,7 +158,7 @@
};
};
- ab8500@5 {
+ ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index e54fffd..468c0a1 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -42,10 +42,9 @@
fsl,pins = <689 0x10000 /* DISP1_DRDY */
482 0x10000 /* DISP1_HSYNC */
489 0x10000 /* DISP1_VSYNC */
- 684 0x10000 /* DISP1_DAT_0 */
515 0x10000 /* DISP1_DAT_22 */
523 0x10000 /* DISP1_DAT_23 */
- 543 0x10000 /* DISP1_DAT_21 */
+ 545 0x10000 /* DISP1_DAT_21 */
553 0x10000 /* DISP1_DAT_20 */
558 0x10000 /* DISP1_DAT_19 */
564 0x10000 /* DISP1_DAT_18 */
diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts
index 5bb0bf3..c9c44b2 100644
--- a/arch/arm/boot/dts/kirkwood-dns320.dts
+++ b/arch/arm/boot/dts/kirkwood-dns320.dts
@@ -42,12 +42,10 @@
ocp@f1000000 {
serial@12000 {
- clock-frequency = <166666667>;
status = "okay";
};
serial@12100 {
- clock-frequency = <166666667>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts
index d430713..e4e4930 100644
--- a/arch/arm/boot/dts/kirkwood-dns325.dts
+++ b/arch/arm/boot/dts/kirkwood-dns325.dts
@@ -50,7 +50,6 @@
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts
index 2e3dd34..0196cf6 100644
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
@@ -37,7 +37,6 @@
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index ef2d8c7..289e51d8 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -38,7 +38,6 @@
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts
index 1b133e0..bd83b8f 100644
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
@@ -73,7 +73,6 @@
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts
index 71902da..5335b1a 100644
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
@@ -51,7 +51,6 @@
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 504f16b..12ccf74 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -78,7 +78,6 @@
};
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
index 6cae459..93c3afb 100644
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
@@ -115,7 +115,6 @@
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
index 8db3123..5bbd054 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -34,7 +34,6 @@
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
diff --git a/arch/arm/boot/dts/kirkwood-lschlv2.dts b/arch/arm/boot/dts/kirkwood-lschlv2.dts
index 9510c9e..9f55d95 100644
--- a/arch/arm/boot/dts/kirkwood-lschlv2.dts
+++ b/arch/arm/boot/dts/kirkwood-lschlv2.dts
@@ -13,7 +13,6 @@
ocp@f1000000 {
serial@12000 {
- clock-frequency = <166666667>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/kirkwood-lsxhl.dts b/arch/arm/boot/dts/kirkwood-lsxhl.dts
index 739019c..5c84c11 100644
--- a/arch/arm/boot/dts/kirkwood-lsxhl.dts
+++ b/arch/arm/boot/dts/kirkwood-lsxhl.dts
@@ -13,7 +13,6 @@
ocp@f1000000 {
serial@12000 {
- clock-frequency = <200000000>;
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts
index 662dfd8..7588241 100644
--- a/arch/arm/boot/dts/kirkwood-mplcec4.dts
+++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts
@@ -90,7 +90,6 @@
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
index e8e7ece..6affd92 100644
--- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
+++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi
@@ -23,7 +23,6 @@
};
serial@12000 {
- clock-frequency = <166666667>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 3a178cf..a7412b9 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -117,7 +117,6 @@
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index ede7fe0d..d27f724 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -18,12 +18,10 @@
ocp@f1000000 {
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
serial@12100 {
- clock-frequency = <200000000>;
status = "ok";
};
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index 842ff95..66eb45b 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -108,7 +108,6 @@
};
serial@12000 {
- clock-frequency = <200000000>;
status = "ok";
};
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 2c738d9..fada7e6 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -38,6 +38,7 @@
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <35>, <36>, <37>, <38>;
+ clocks = <&gate_clk 7>;
};
gpio1: gpio@10140 {
@@ -49,6 +50,7 @@
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <39>, <40>, <41>;
+ clocks = <&gate_clk 7>;
};
serial@12000 {
@@ -57,7 +59,6 @@
reg-shift = <2>;
interrupts = <33>;
clocks = <&gate_clk 7>;
- /* set clock-frequency in board dts */
status = "disabled";
};
@@ -67,7 +68,6 @@
reg-shift = <2>;
interrupts = <34>;
clocks = <&gate_clk 7>;
- /* set clock-frequency in board dts */
status = "disabled";
};
@@ -75,6 +75,7 @@
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
+ clocks = <&gate_clk 7>;
};
spi@10600 {
diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
index 5a3a58b..0077fc8 100644
--- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
+++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts
@@ -11,7 +11,7 @@
/ {
model = "LaCie Ethernet Disk mini V2";
- compatible = "lacie,ethernet-disk-mini-v2", "marvell-orion5x-88f5182", "marvell,orion5x";
+ compatible = "lacie,ethernet-disk-mini-v2", "marvell,orion5x-88f5182", "marvell,orion5x";
memory {
reg = <0x00000000 0x4000000>; /* 64 MB */
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
index 27f31a5..d3ec32f 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/snowball.dts
@@ -298,7 +298,7 @@
};
};
- ab8500@5 {
+ ab8500 {
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 936d230..7e8769b 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -75,6 +75,9 @@
compatible = "arm,pl330", "arm,primecell";
reg = <0xffe01000 0x1000>;
interrupts = <0 180 4>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
};
};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 9a42893..48d00a0 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -118,6 +118,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
interrupts = <1 13 0x304>;
+ clocks = <&tegra_car 132>;
};
intc: interrupt-controller {
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 767803e..9d87a3f 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -119,6 +119,7 @@
compatible = "arm,cortex-a9-twd-timer";
reg = <0x50040600 0x20>;
interrupts = <1 13 0xf04>;
+ clocks = <&tegra_car 214>;
};
intc: interrupt-controller {
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index fbbc5bb..6a99e30 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -116,6 +116,7 @@
CONFIG_SND_MXS_SOC=y
CONFIG_SND_SOC_MXS_SGTL5000=y
CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
CONFIG_USB_CHIPIDEA=y
CONFIG_USB_CHIPIDEA_HOST=y
CONFIG_USB_STORAGE=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index b16bae2..bd07864 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -126,6 +126,8 @@
CONFIG_INPUT_TWL4030_PWRBUTTON=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
diff --git a/arch/arm/include/asm/xen/events.h b/arch/arm/include/asm/xen/events.h
index 5c27696..8b1f37b 100644
--- a/arch/arm/include/asm/xen/events.h
+++ b/arch/arm/include/asm/xen/events.h
@@ -2,6 +2,7 @@
#define _ASM_ARM_XEN_EVENTS_H
#include <asm/ptrace.h>
+#include <asm/atomic.h>
enum ipi_vector {
XEN_PLACEHOLDER_VECTOR,
@@ -15,26 +16,8 @@
return raw_irqs_disabled_flags(regs->ARM_cpsr);
}
-/*
- * We cannot use xchg because it does not support 8-byte
- * values. However it is safe to use {ldr,dtd}exd directly because all
- * platforms which Xen can run on support those instructions.
- */
-static inline xen_ulong_t xchg_xen_ulong(xen_ulong_t *ptr, xen_ulong_t val)
-{
- xen_ulong_t oldval;
- unsigned int tmp;
-
- wmb();
- asm volatile("@ xchg_xen_ulong\n"
- "1: ldrexd %0, %H0, [%3]\n"
- " strexd %1, %2, %H2, [%3]\n"
- " teq %1, #0\n"
- " bne 1b"
- : "=&r" (oldval), "=&r" (tmp)
- : "r" (val), "r" (ptr)
- : "memory", "cc");
- return oldval;
-}
+#define xchg_xen_ulong(ptr, val) atomic64_xchg(container_of((ptr), \
+ atomic64_t, \
+ counter), (val))
#endif /* _ASM_ARM_XEN_EVENTS_H */
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 31644f1..79078ed 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -480,7 +480,7 @@
evt->features = CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_PERIODIC |
CLOCK_EVT_FEAT_DUMMY;
- evt->rating = 400;
+ evt->rating = 100;
evt->mult = 1;
evt->set_mode = broadcast_timer_set_mode;
diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S
index d912e73..94b0650 100644
--- a/arch/arm/lib/memset.S
+++ b/arch/arm/lib/memset.S
@@ -14,31 +14,15 @@
.text
.align 5
- .word 0
-
-1: subs r2, r2, #4 @ 1 do we have enough
- blt 5f @ 1 bytes to align with?
- cmp r3, #2 @ 1
- strltb r1, [ip], #1 @ 1
- strleb r1, [ip], #1 @ 1
- strb r1, [ip], #1 @ 1
- add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3))
-/*
- * The pointer is now aligned and the length is adjusted. Try doing the
- * memset again.
- */
ENTRY(memset)
-/*
- * Preserve the contents of r0 for the return value.
- */
- mov ip, r0
- ands r3, ip, #3 @ 1 unaligned?
- bne 1b @ 1
+ ands r3, r0, #3 @ 1 unaligned?
+ mov ip, r0 @ preserve r0 as return value
+ bne 6f @ 1
/*
* we know that the pointer in ip is aligned to a word boundary.
*/
- orr r1, r1, r1, lsl #8
+1: orr r1, r1, r1, lsl #8
orr r1, r1, r1, lsl #16
mov r3, r1
cmp r2, #16
@@ -127,4 +111,13 @@
tst r2, #1
strneb r1, [ip], #1
mov pc, lr
+
+6: subs r2, r2, #4 @ 1 do we have enough
+ blt 5b @ 1 bytes to align with?
+ cmp r3, #2 @ 1
+ strltb r1, [ip], #1 @ 1
+ strleb r1, [ip], #1 @ 1
+ strb r1, [ip], #1 @ 1
+ add r2, r2, r3 @ 1 (r2 = r2 - (4 - r3))
+ b 1b
ENDPROC(memset)
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 2ea7059..c20a870 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -176,6 +176,7 @@
/* If you choose to use a pin other than PB16 it needs to be 3.3V */
.pin = AT91_PIN_PB16,
.is_open_drain = 1,
+ .ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device w1_device = {
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index a033b8d..869cbec 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -188,6 +188,7 @@
static struct w1_gpio_platform_data w1_gpio_pdata = {
.pin = AT91_PIN_PA29,
.is_open_drain = 1,
+ .ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device w1_device = {
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index eed465a..5fc2377 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -209,6 +209,14 @@
extern void at91_gpio_suspend(void);
extern void at91_gpio_resume(void);
+#ifdef CONFIG_PINCTRL_AT91
+extern void at91_pinctrl_gpio_suspend(void);
+extern void at91_pinctrl_gpio_resume(void);
+#else
+static inline void at91_pinctrl_gpio_suspend(void) {}
+static inline void at91_pinctrl_gpio_resume(void) {}
+#endif
+
#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index 8e21026..e0ca591 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -92,23 +92,21 @@
void at91_irq_suspend(void)
{
- int i = 0, bit;
+ int bit = -1;
if (has_aic5()) {
/* disable enabled irqs */
- while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+ while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IDCR, 1);
- i = bit;
}
/* enable wakeup irqs */
- i = 0;
- while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+ bit = -1;
+ while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IECR, 1);
- i = bit;
}
} else {
at91_aic_write(AT91_AIC_IDCR, *backups);
@@ -118,23 +116,21 @@
void at91_irq_resume(void)
{
- int i = 0, bit;
+ int bit = -1;
if (has_aic5()) {
/* disable wakeup irqs */
- while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) {
+ while ((bit = find_next_bit(wakeups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IDCR, 1);
- i = bit;
}
/* enable irqs disabled for suspend */
- i = 0;
- while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) {
+ bit = -1;
+ while ((bit = find_next_bit(backups, n_irqs, bit + 1)) < n_irqs) {
at91_aic_write(AT91_AIC5_SSR,
bit & AT91_AIC5_INTSEL_MSK);
at91_aic_write(AT91_AIC5_IECR, 1);
- i = bit;
}
} else {
at91_aic_write(AT91_AIC_IDCR, *wakeups);
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index adb6db8..73f1f25 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -201,7 +201,10 @@
static int at91_pm_enter(suspend_state_t state)
{
- at91_gpio_suspend();
+ if (of_have_populated_dt())
+ at91_pinctrl_gpio_suspend();
+ else
+ at91_gpio_suspend();
at91_irq_suspend();
pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
@@ -286,7 +289,10 @@
error:
target_state = PM_SUSPEND_ON;
at91_irq_resume();
- at91_gpio_resume();
+ if (of_have_populated_dt())
+ at91_pinctrl_gpio_resume();
+ else
+ at91_gpio_resume();
return 0;
}
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index a685e97..45b7c71 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -743,6 +743,9 @@
*/
int edma_alloc_slot(unsigned ctlr, int slot)
{
+ if (!edma_cc[ctlr])
+ return -EINVAL;
+
if (slot >= 0)
slot = EDMA_CHAN_SLOT(slot);
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig
index abda5a1..0f2111a 100644
--- a/arch/arm/mach-footbridge/Kconfig
+++ b/arch/arm/mach-footbridge/Kconfig
@@ -67,6 +67,7 @@
select ISA
select ISA_DMA
select PCI
+ select VIRT_TO_BUS
help
Say Y here if you intend to run this kernel on the Rebel.COM
NetWinder. Information about this machine can be found at:
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
index 74e3a34..e13a8fa 100644
--- a/arch/arm/mach-imx/clk-imx35.c
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -264,6 +264,7 @@
clk_prepare_enable(clk[gpio3_gate]);
clk_prepare_enable(clk[iim_gate]);
clk_prepare_enable(clk[emi_gate]);
+ clk_prepare_enable(clk[max_gate]);
/*
* SCC is needed to boot via mmc after a watchdog reset. The clock code
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index 7b025ee..2f9ff93 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -172,7 +172,7 @@
static struct clk_onecell_data clk_data;
static enum mx6q_clks const clks_init_on[] __initconst = {
- mmdc_ch0_axi, rom,
+ mmdc_ch0_axi, rom, pll1_sys,
};
static struct clk_div_table clk_enet_ref_table[] = {
diff --git a/arch/arm/mach-imx/headsmp.S b/arch/arm/mach-imx/headsmp.S
index 921fc15..a58c8b0 100644
--- a/arch/arm/mach-imx/headsmp.S
+++ b/arch/arm/mach-imx/headsmp.S
@@ -26,16 +26,16 @@
#ifdef CONFIG_PM
/*
- * The following code is located into the .data section. This is to
- * allow phys_l2x0_saved_regs to be accessed with a relative load
- * as we are running on physical address here.
+ * The following code must assume it is running from physical address
+ * where absolute virtual addresses to the data section have to be
+ * turned into relative ones.
*/
- .data
- .align
#ifdef CONFIG_CACHE_L2X0
.macro pl310_resume
- ldr r2, phys_l2x0_saved_regs
+ adr r0, l2x0_saved_regs_offset
+ ldr r2, [r0]
+ add r2, r2, r0
ldr r0, [r2, #L2X0_R_PHY_BASE] @ get physical base of l2x0
ldr r1, [r2, #L2X0_R_AUX_CTRL] @ get aux_ctrl value
str r1, [r0, #L2X0_AUX_CTRL] @ restore aux_ctrl
@@ -43,9 +43,9 @@
str r1, [r0, #L2X0_CTRL] @ re-enable L2
.endm
- .globl phys_l2x0_saved_regs
-phys_l2x0_saved_regs:
- .long 0
+l2x0_saved_regs_offset:
+ .word l2x0_saved_regs - .
+
#else
.macro pl310_resume
.endm
diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c
index 03b65e5..8234839 100644
--- a/arch/arm/mach-imx/imx25-dt.c
+++ b/arch/arm/mach-imx/imx25-dt.c
@@ -27,6 +27,11 @@
NULL
};
+static void __init imx25_timer_init(void)
+{
+ mx25_clocks_init_dt();
+}
+
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.map_io = mx25_map_io,
.init_early = imx25_init_early,
diff --git a/arch/arm/mach-imx/pm-imx6q.c b/arch/arm/mach-imx/pm-imx6q.c
index ee42d20..5faba7a 100644
--- a/arch/arm/mach-imx/pm-imx6q.c
+++ b/arch/arm/mach-imx/pm-imx6q.c
@@ -22,8 +22,6 @@
#include "common.h"
#include "hardware.h"
-extern unsigned long phys_l2x0_saved_regs;
-
static int imx6q_suspend_finish(unsigned long val)
{
cpu_do_idle();
@@ -57,18 +55,5 @@
void __init imx6q_pm_init(void)
{
- /*
- * The l2x0 core code provides an infrastucture to save and restore
- * l2x0 registers across suspend/resume cycle. But because imx6q
- * retains L2 content during suspend and needs to resume L2 before
- * MMU is enabled, it can only utilize register saving support and
- * have to take care of restoring on its own. So we save physical
- * address of the data structure used by l2x0 core to save registers,
- * and later restore the necessary ones in imx6q resume entry.
- */
-#ifdef CONFIG_CACHE_L2X0
- phys_l2x0_saved_regs = __pa(&l2x0_saved_regs);
-#endif
-
suspend_set_ops(&imx6q_pm_ops);
}
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index d42730a..d599e35 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -163,6 +163,7 @@
static struct w1_gpio_platform_data vulcan_w1_gpio_pdata = {
.pin = 14,
+ .ext_pullup_enable_pin = -EINVAL,
};
static struct platform_device vulcan_w1_gpio = {
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 2e73e9d..d367aa6 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -41,16 +41,12 @@
struct device_node *np = of_find_compatible_node(
NULL, NULL, "marvell,kirkwood-gating-clock");
-
struct of_phandle_args clkspec;
+ struct clk *clk;
clkspec.np = np;
clkspec.args_count = 1;
- clkspec.args[0] = CGC_BIT_GE0;
- orion_clkdev_add(NULL, "mv643xx_eth_port.0",
- of_clk_get_from_provider(&clkspec));
-
clkspec.args[0] = CGC_BIT_PEX0;
orion_clkdev_add("0", "pcie",
of_clk_get_from_provider(&clkspec));
@@ -59,9 +55,24 @@
orion_clkdev_add("1", "pcie",
of_clk_get_from_provider(&clkspec));
- clkspec.args[0] = CGC_BIT_GE1;
- orion_clkdev_add(NULL, "mv643xx_eth_port.1",
+ clkspec.args[0] = CGC_BIT_SDIO;
+ orion_clkdev_add(NULL, "mvsdio",
of_clk_get_from_provider(&clkspec));
+
+ /*
+ * The ethernet interfaces forget the MAC address assigned by
+ * u-boot if the clocks are turned off. Until proper DT support
+ * is available we always enable them for now.
+ */
+ clkspec.args[0] = CGC_BIT_GE0;
+ clk = of_clk_get_from_provider(&clkspec);
+ orion_clkdev_add(NULL, "mv643xx_eth_port.0", clk);
+ clk_prepare_enable(clk);
+
+ clkspec.args[0] = CGC_BIT_GE1;
+ clk = of_clk_get_from_provider(&clkspec);
+ orion_clkdev_add(NULL, "mv643xx_eth_port.1", clk);
+ clk_prepare_enable(clk);
}
static void __init kirkwood_of_clk_init(void)
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index d1e2d59..f62b68d 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -9,6 +9,7 @@
*/
#include <linux/init.h>
+#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c
index 8fb23af..e26eeba 100644
--- a/arch/arm/mach-mxs/icoll.c
+++ b/arch/arm/mach-mxs/icoll.c
@@ -100,7 +100,7 @@
.xlate = irq_domain_xlate_onecell,
};
-void __init icoll_of_init(struct device_node *np,
+static void __init icoll_of_init(struct device_node *np,
struct device_node *interrupt_parent)
{
/*
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 0521867..3218f1f 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -402,17 +402,17 @@
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ);
+
+ mxsfb_pdata.mode_list = cfa10049_video_modes;
+ mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
+ mxsfb_pdata.default_bpp = 32;
+ mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
}
static void __init cfa10037_init(void)
{
enable_clk_enet_out();
update_fec_mac_prop(OUI_CRYSTALFONTZ);
-
- mxsfb_pdata.mode_list = cfa10049_video_modes;
- mxsfb_pdata.mode_count = ARRAY_SIZE(cfa10049_video_modes);
- mxsfb_pdata.default_bpp = 32;
- mxsfb_pdata.ld_intf_width = STMLCDIF_18BIT;
}
static void __init apf28_init(void)
diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c
index a4294aa..e63b7d8 100644
--- a/arch/arm/mach-mxs/mm.c
+++ b/arch/arm/mach-mxs/mm.c
@@ -18,6 +18,7 @@
#include <mach/mx23.h>
#include <mach/mx28.h>
+#include <mach/common.h>
/*
* Define the MX23 memory map.
diff --git a/arch/arm/mach-mxs/ocotp.c b/arch/arm/mach-mxs/ocotp.c
index 54add60..1dff467 100644
--- a/arch/arm/mach-mxs/ocotp.c
+++ b/arch/arm/mach-mxs/ocotp.c
@@ -19,6 +19,7 @@
#include <asm/processor.h> /* for cpu_relax() */
#include <mach/mxs.h>
+#include <mach/common.h>
#define OCOTP_WORD_OFFSET 0x20
#define OCOTP_WORD_COUNT 0x20
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index fb18831..14f7e99 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -31,6 +31,8 @@
#include <plat/i2c.h>
+#include <mach/irqs.h>
+
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
void omap7xx_map_io(void);
#else
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 49ac3df..8111cd9 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -311,9 +311,6 @@
default y
select OMAP_PACKAGE_CBB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select SERIAL_8250
- select SERIAL_8250_CONSOLE
- select SERIAL_CORE_CONSOLE
config MACH_OMAP_ZOOM3
bool "OMAP3630 Zoom3 board"
@@ -321,9 +318,6 @@
default y
select OMAP_PACKAGE_CBP
select REGULATOR_FIXED_VOLTAGE if REGULATOR
- select SERIAL_8250
- select SERIAL_8250_CONSOLE
- select SERIAL_CORE_CONSOLE
config MACH_CM_T35
bool "CompuLab CM-T35/CM-T3730 modules"
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 0274ff7..e54a480 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -102,6 +102,7 @@
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
+ .init_late = omap3_init_late,
.init_time = omap3_sync32k_timer_init,
.dt_compat = omap3_boards_compat,
.restart = omap3xxx_restart,
@@ -119,6 +120,7 @@
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
+ .init_late = omap3_init_late,
.init_time = omap3_secure_sync32k_timer_init,
.dt_compat = omap3_gp_boards_compat,
.restart = omap3xxx_restart,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index f7c4616..d2ea68e 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -17,6 +17,7 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/usb/phy.h>
#include <linux/usb/musb.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
@@ -98,6 +99,7 @@
sdrc_params = nokia_get_sdram_timings();
omap_sdrc_init(sdrc_params, sdrc_params);
+ usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
usb_musb_init(&musb_board_data);
rx51_peripherals_init();
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 0a6b9c7..40f4a03 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -108,7 +108,6 @@
void omap3630_init_late(void);
void am35xx_init_late(void);
void ti81xx_init_late(void);
-void omap4430_init_late(void);
int omap2_common_pm_late_init(void);
#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index e4b16c8..410e1ba 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -1122,9 +1122,6 @@
/* TODO: remove, see function definition */
gpmc_convert_ps_to_ns(gpmc_t);
- /* Now the GPMC is initialised, unreserve the chip-selects */
- gpmc_cs_map = 0;
-
return 0;
}
@@ -1383,6 +1380,9 @@
if (IS_ERR_VALUE(gpmc_setup_irq()))
dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
+ /* Now the GPMC is initialised, unreserve the chip-selects */
+ gpmc_cs_map = 0;
+
rc = gpmc_probe_dt(pdev);
if (rc < 0) {
clk_disable_unprepare(gpmc_l3_clk);
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 6a217c9..f82cf87 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -211,8 +211,6 @@
return -EINVAL;
}
- pr_err("%s: Could not find signal %s\n", __func__, muxname);
-
return -ENODEV;
}
@@ -234,6 +232,8 @@
return mux_mode;
}
+ pr_err("%s: Could not find signal %s\n", __func__, muxname);
+
return -ENODEV;
}
@@ -739,8 +739,9 @@
list_for_each_entry(e, &partition->muxmodes, node) {
struct omap_mux *m = &e->mux;
- (void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir,
- m, &omap_mux_dbg_signal_fops);
+ (void)debugfs_create_file(m->muxnames[0], S_IWUSR | S_IRUGO,
+ mux_dbg_dir, m,
+ &omap_mux_dbg_signal_fops);
}
}
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index af41888..969b0ba 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -505,6 +505,7 @@
.pin = GPIO_ONE_WIRE,
.is_open_drain = 0,
.enable_external_pullup = w1_enable_external_pullup,
+ .ext_pullup_enable_pin = -EINVAL,
};
struct platform_device raumfeld_w1_gpio_device = {
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index fcdf52d..f051f53 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -214,11 +214,6 @@
.name = "pcmcdclk",
};
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
static struct clk *clkset_vpllsrc_list[] = {
[0] = &clk_fin_vpll,
[1] = &clk_sclk_hdmi27m,
@@ -305,18 +300,6 @@
static struct clk init_clocks_off[] = {
{
- .name = "dma",
- .devname = "dma-pl330.0",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip0_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "dma",
- .devname = "dma-pl330.1",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
.name = "rot",
.parent = &clk_hclk_dsys.clk,
.enable = s5pv210_clk_ip0_ctrl,
@@ -573,6 +556,20 @@
.ctrlbit = (1<<19),
};
+static struct clk clk_pdma0 = {
+ .name = "pdma0",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 3),
+};
+
+static struct clk clk_pdma1 = {
+ .name = "pdma1",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip0_ctrl,
+ .ctrlbit = (1 << 4),
+};
+
static struct clk *clkset_uart_list[] = {
[6] = &clk_mout_mpll.clk,
[7] = &clk_mout_epll.clk,
@@ -1075,6 +1072,8 @@
&clk_hsmmc1,
&clk_hsmmc2,
&clk_hsmmc3,
+ &clk_pdma0,
+ &clk_pdma1,
};
/* Clock initialisation code */
@@ -1333,6 +1332,8 @@
CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
CLKDEV_INIT("s5pv210-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
CLKDEV_INIT("s5pv210-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
+ CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
};
void __init s5pv210_register_clocks(void)
@@ -1361,6 +1362,5 @@
for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
s3c_disable_clocks(clk_cdev[ptr], 1);
- s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 3a38f7b..e373de4 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -845,7 +845,7 @@
.mux_id = 0,
.flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
V4L2_MBUS_VSYNC_ACTIVE_LOW,
- .bus_type = FIMC_BUS_TYPE_ITU_601,
+ .fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
.board_info = &noon010pc30_board_info,
.i2c_bus_num = 0,
.clk_frequency = 16000000UL,
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index cdcb799..fec49eb 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -32,6 +32,7 @@
#include <linux/smsc911x.h>
#include <linux/spi/spi.h>
#include <linux/spi/sh_hspi.h>
+#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/usb/otg.h>
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index f9d754f..d2b3937 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -14,7 +14,7 @@
#define pr_fmt(fmt) "SPEAr3xx: " fmt
#include <linux/amba/pl022.h>
-#include <linux/amba/pl08x.h>
+#include <linux/amba/pl080.h>
#include <linux/io.h>
#include <plat/pl080.h>
#include <mach/generic.h>
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index c7e3759..e9db6b4 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -342,6 +342,7 @@
{
struct dma_pool *pool = &atomic_pool;
pgprot_t prot = pgprot_dmacoherent(pgprot_kernel);
+ gfp_t gfp = GFP_KERNEL | GFP_DMA;
unsigned long nr_pages = pool->size >> PAGE_SHIFT;
unsigned long *bitmap;
struct page *page;
@@ -361,8 +362,8 @@
ptr = __alloc_from_contiguous(NULL, pool->size, prot, &page,
atomic_pool_init);
else
- ptr = __alloc_remap_buffer(NULL, pool->size, GFP_KERNEL, prot,
- &page, atomic_pool_init);
+ ptr = __alloc_remap_buffer(NULL, pool->size, gfp, prot, &page,
+ atomic_pool_init);
if (ptr) {
int i;
diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c
index febe386..807ac8e 100644
--- a/arch/arm/plat-orion/addr-map.c
+++ b/arch/arm/plat-orion/addr-map.c
@@ -157,9 +157,12 @@
u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i));
/*
- * Chip select enabled?
+ * We only take care of entries for which the chip
+ * select is enabled, and that don't have high base
+ * address bits set (devices can only access the first
+ * 32 bits of the memory).
*/
- if (size & 1) {
+ if ((size & 1) && !(base & 0xF)) {
struct mbus_dram_window *w;
w = &orion_mbus_dram_info.cs[cs++];
diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig
index 739d016..8a08c31 100644
--- a/arch/arm/plat-spear/Kconfig
+++ b/arch/arm/plat-spear/Kconfig
@@ -10,7 +10,7 @@
config ARCH_SPEAR13XX
bool "ST SPEAr13xx with Device Tree"
- select ARCH_HAVE_CPUFREQ
+ select ARCH_HAS_CPUFREQ
select ARM_GIC
select CPU_V7
select GPIO_SPEAR_SPICS
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 9b89257..c1a868d 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -7,7 +7,7 @@
select HAVE_OPROFILE
select HAVE_KPROBES
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_ATOMIC64
select HARDIRQS_SW_RESEND
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 600494c..c3f2e0b 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -33,7 +33,7 @@
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_WANT_OPTIONAL_GPIOLIB
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index bb0ac66..06dd026 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -43,7 +43,7 @@
select GENERIC_ATOMIC64
select HAVE_GENERIC_HARDIRQS
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_IRQ_SHOW
select GENERIC_IOMAP
diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig
index 12369b1..2ce731f 100644
--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -6,7 +6,7 @@
select HAVE_PERF_EVENTS
select HAVE_UID16
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_SHOW
select HAVE_DEBUG_BUGVERBOSE
select ARCH_HAVE_NMI_SAFE_CMPXCHG
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index ae8551e..79250de 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -5,7 +5,7 @@
select HAVE_GENERIC_HARDIRQS
select GENERIC_ATOMIC64
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_WANT_IPC_PARSE_VERSION
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 33f3fdc..9a02f71 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -26,7 +26,7 @@
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_VIRT_CPU_ACCOUNTING
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_DISCARD_MEMBLOCK
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index 9262381..bcd17b2 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -10,7 +10,7 @@
select ARCH_WANT_IPC_PARSE_VERSION
select HAVE_DEBUG_BUGVERBOSE
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_ATOMIC64
diff --git a/arch/m32r/include/uapi/asm/stat.h b/arch/m32r/include/uapi/asm/stat.h
index da4518f..98470fe 100644
--- a/arch/m32r/include/uapi/asm/stat.h
+++ b/arch/m32r/include/uapi/asm/stat.h
@@ -63,10 +63,10 @@
long long st_size;
unsigned long st_blksize;
-#if defined(__BIG_ENDIAN)
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
unsigned long __pad4; /* future possible st_blocks high bits */
unsigned long st_blocks; /* Number 512-byte blocks allocated. */
-#elif defined(__LITTLE_ENDIAN)
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
unsigned long st_blocks; /* Number 512-byte blocks allocated. */
unsigned long __pad4; /* future possible st_blocks high bits */
#else
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 0e708c7..6de8133 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -8,7 +8,7 @@
select GENERIC_IRQ_SHOW
select GENERIC_ATOMIC64
select HAVE_UID16
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
select GENERIC_CPU_DEVICES
select GENERIC_STRNCPY_FROM_USER if MMU
diff --git a/arch/m68k/Kconfig.machine b/arch/m68k/Kconfig.machine
index 7cdf6b0..7240584 100644
--- a/arch/m68k/Kconfig.machine
+++ b/arch/m68k/Kconfig.machine
@@ -310,7 +310,6 @@
config SOM5282EM
bool "EMAC.Inc SOM5282EM board support"
depends on M528x
- select EMAC_INC
help
Support for the EMAC.Inc SOM5282EM module.
diff --git a/arch/m68k/include/asm/MC68328.h b/arch/m68k/include/asm/MC68328.h
index a337e56..4ebf098 100644
--- a/arch/m68k/include/asm/MC68328.h
+++ b/arch/m68k/include/asm/MC68328.h
@@ -293,7 +293,7 @@
/*
* Here go the bitmasks themselves
*/
-#define IMR_MSPIM (1 << SPIM _IRQ_NUM) /* Mask SPI Master interrupt */
+#define IMR_MSPIM (1 << SPIM_IRQ_NUM) /* Mask SPI Master interrupt */
#define IMR_MTMR2 (1 << TMR2_IRQ_NUM) /* Mask Timer 2 interrupt */
#define IMR_MUART (1 << UART_IRQ_NUM) /* Mask UART interrupt */
#define IMR_MWDT (1 << WDT_IRQ_NUM) /* Mask Watchdog Timer interrupt */
@@ -327,7 +327,7 @@
#define IWR_ADDR 0xfffff308
#define IWR LONG_REF(IWR_ADDR)
-#define IWR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define IWR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
#define IWR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
#define IWR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
#define IWR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
@@ -357,7 +357,7 @@
#define ISR_ADDR 0xfffff30c
#define ISR LONG_REF(ISR_ADDR)
-#define ISR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define ISR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
#define ISR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
#define ISR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
#define ISR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
@@ -391,7 +391,7 @@
#define IPR_ADDR 0xfffff310
#define IPR LONG_REF(IPR_ADDR)
-#define IPR_SPIM (1 << SPIM _IRQ_NUM) /* SPI Master interrupt */
+#define IPR_SPIM (1 << SPIM_IRQ_NUM) /* SPI Master interrupt */
#define IPR_TMR2 (1 << TMR2_IRQ_NUM) /* Timer 2 interrupt */
#define IPR_UART (1 << UART_IRQ_NUM) /* UART interrupt */
#define IPR_WDT (1 << WDT_IRQ_NUM) /* Watchdog Timer interrupt */
@@ -757,7 +757,7 @@
/* 'EZ328-compatible definitions */
#define TCN_ADDR TCN1_ADDR
-#define TCN TCN
+#define TCN TCN1
/*
* Timer Unit 1 and 2 Status Registers
diff --git a/arch/m68k/kernel/setup_no.c b/arch/m68k/kernel/setup_no.c
index 71fb299..911ba47 100644
--- a/arch/m68k/kernel/setup_no.c
+++ b/arch/m68k/kernel/setup_no.c
@@ -57,6 +57,9 @@
void (*mach_halt)(void);
void (*mach_power_off)(void);
+#ifdef CONFIG_M68000
+#define CPU_NAME "MC68000"
+#endif
#ifdef CONFIG_M68328
#define CPU_NAME "MC68328"
#endif
diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c
index afd8106f..519aad8 100644
--- a/arch/m68k/mm/init.c
+++ b/arch/m68k/mm/init.c
@@ -188,7 +188,7 @@
}
}
-#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
+#if defined(CONFIG_MMU) && !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
/* insert pointer tables allocated so far into the tablelist */
init_pointer_table((unsigned long)kernel_pg_dir);
for (i = 0; i < PTRS_PER_PGD; i++) {
diff --git a/arch/m68k/platform/coldfire/m528x.c b/arch/m68k/platform/coldfire/m528x.c
index 83b7dad..b03a9d2 100644
--- a/arch/m68k/platform/coldfire/m528x.c
+++ b/arch/m68k/platform/coldfire/m528x.c
@@ -69,7 +69,7 @@
u8 port;
/* make sure PUAPAR is set for UART0 and UART1 */
- port = readb(MCF5282_GPIO_PUAPAR);
+ port = readb(MCFGPIO_PUAPAR);
port |= 0x03 | (0x03 << 2);
writeb(port, MCFGPIO_PUAPAR);
}
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 7843d11..1323fa2 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -19,7 +19,7 @@
select HAVE_DEBUG_KMEMLEAK
select IRQ_DOMAIN
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
select GENERIC_PCI_IOMAP
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index ae9c716..cd2e21f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -38,7 +38,7 @@
select GENERIC_CLOCKEVENTS
select GENERIC_CMOS_UPDATE
select HAVE_MOD_ARCH_SPECIFIC
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select MODULES_USE_ELF_REL if MODULES
select MODULES_USE_ELF_RELA if MODULES && 64BIT
select CLONE_BACKWARDS
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig
index b06c736..428da17 100644
--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
@@ -8,7 +8,7 @@
select HAVE_ARCH_KGDB
select GENERIC_ATOMIC64
select HAVE_NMI_WATCHDOG if MN10300_WD_TIMER
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_CLOCKEVENTS
select MODULES_USE_ELF_RELA
select OLD_SIGSUSPEND3
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 014a648..9ab3bf2 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -9,10 +9,9 @@
select OF_EARLY_FLATTREE
select IRQ_DOMAIN
select HAVE_MEMBLOCK
- select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARCH_REQUIRE_GPIOLIB
select HAVE_ARCH_TRACEHOOK
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
select GENERIC_IRQ_CHIP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index a9ff712..0339181 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -21,7 +21,7 @@
select GENERIC_STRNCPY_FROM_USER
select SYSCTL_ARCH_UNALIGN_ALLOW
select HAVE_MOD_ARCH_SPECIFIC
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select MODULES_USE_ELF_RELA
select CLONE_BACKWARDS
select TTY # Needed for pdc_cons.c
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index b89d7eb..ea5bb04 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -90,6 +90,7 @@
config PPC
bool
default y
+ select BINFMT_ELF
select OF
select OF_EARLY_FLATTREE
select HAVE_FTRACE_MCOUNT_RECORD
@@ -98,7 +99,7 @@
select HAVE_FUNCTION_GRAPH_TRACER
select SYSCTL_EXCEPTION_TRACE
select ARCH_WANT_OPTIONAL_GPIOLIB
- select HAVE_VIRT_TO_BUS if !PPC64
+ select VIRT_TO_BUS if !PPC64
select HAVE_IDE
select HAVE_IOREMAP_PROT
select HAVE_EFFICIENT_UNALIGNED_ACCESS
diff --git a/arch/powerpc/include/asm/mmu-hash64.h b/arch/powerpc/include/asm/mmu-hash64.h
index 2fdb47a..b59e06f 100644
--- a/arch/powerpc/include/asm/mmu-hash64.h
+++ b/arch/powerpc/include/asm/mmu-hash64.h
@@ -343,17 +343,16 @@
/*
* VSID allocation (256MB segment)
*
- * We first generate a 38-bit "proto-VSID". For kernel addresses this
- * is equal to the ESID | 1 << 37, for user addresses it is:
- * (context << USER_ESID_BITS) | (esid & ((1U << USER_ESID_BITS) - 1)
+ * We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated
+ * from mmu context id and effective segment id of the address.
*
- * This splits the proto-VSID into the below range
- * 0 - (2^(CONTEXT_BITS + USER_ESID_BITS) - 1) : User proto-VSID range
- * 2^(CONTEXT_BITS + USER_ESID_BITS) - 2^(VSID_BITS) : Kernel proto-VSID range
- *
- * We also have CONTEXT_BITS + USER_ESID_BITS = VSID_BITS - 1
- * That is, we assign half of the space to user processes and half
- * to the kernel.
+ * For user processes max context id is limited to ((1ul << 19) - 5)
+ * for kernel space, we use the top 4 context ids to map address as below
+ * NOTE: each context only support 64TB now.
+ * 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ]
*
* The proto-VSIDs are then scrambled into real VSIDs with the
* multiplicative hash:
@@ -363,41 +362,49 @@
* VSID_MULTIPLIER is prime, so in particular it is
* co-prime to VSID_MODULUS, making this a 1:1 scrambling function.
* Because the modulus is 2^n-1 we can compute it efficiently without
- * a divide or extra multiply (see below).
+ * a divide or extra multiply (see below). The scramble function gives
+ * robust scattering in the hash table (at least based on some initial
+ * results).
*
- * This scheme has several advantages over older methods:
+ * We also consider VSID 0 special. We use VSID 0 for slb entries mapping
+ * bad address. This enables us to consolidate bad address handling in
+ * hash_page.
*
- * - We have VSIDs allocated for every kernel address
- * (i.e. everything above 0xC000000000000000), except the very top
- * segment, which simplifies several things.
- *
- * - We allow for USER_ESID_BITS significant bits of ESID and
- * CONTEXT_BITS bits of context for user addresses.
- * i.e. 64T (46 bits) of address space for up to half a million contexts.
- *
- * - The scramble function gives robust scattering in the hash
- * table (at least based on some initial results). The previous
- * method was more susceptible to pathological cases giving excessive
- * hash collisions.
+ * We also need to avoid the last segment of the last context, because that
+ * would give a protovsid of 0x1fffffffff. That will result in a VSID 0
+ * because of the modulo operation in vsid scramble. But the vmemmap
+ * (which is what uses region 0xf) will never be close to 64TB in size
+ * (it's 56 bytes per page of system memory).
*/
+#define CONTEXT_BITS 19
+#define ESID_BITS 18
+#define ESID_BITS_1T 6
+
+/*
+ * 256MB segment
+ * The proto-VSID space has 2^(CONTEX_BITS + ESID_BITS) - 1 segments
+ * available for user + kernel mapping. The top 4 contexts are used for
+ * kernel mapping. Each segment contains 2^28 bytes. Each
+ * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
+ * (19 == 37 + 28 - 46).
+ */
+#define MAX_USER_CONTEXT ((ASM_CONST(1) << CONTEXT_BITS) - 5)
+
/*
* This should be computed such that protovosid * vsid_mulitplier
* doesn't overflow 64 bits. It should also be co-prime to vsid_modulus
*/
#define VSID_MULTIPLIER_256M ASM_CONST(12538073) /* 24-bit prime */
-#define VSID_BITS_256M 38
+#define VSID_BITS_256M (CONTEXT_BITS + ESID_BITS)
#define VSID_MODULUS_256M ((1UL<<VSID_BITS_256M)-1)
#define VSID_MULTIPLIER_1T ASM_CONST(12538073) /* 24-bit prime */
-#define VSID_BITS_1T 26
+#define VSID_BITS_1T (CONTEXT_BITS + ESID_BITS_1T)
#define VSID_MODULUS_1T ((1UL<<VSID_BITS_1T)-1)
-#define CONTEXT_BITS 19
-#define USER_ESID_BITS 18
-#define USER_ESID_BITS_1T 6
-#define USER_VSID_RANGE (1UL << (USER_ESID_BITS + SID_SHIFT))
+#define USER_VSID_RANGE (1UL << (ESID_BITS + SID_SHIFT))
/*
* This macro generates asm code to compute the VSID scramble
@@ -421,7 +428,8 @@
srdi rx,rt,VSID_BITS_##size; \
clrldi rt,rt,(64-VSID_BITS_##size); \
add rt,rt,rx; /* add high and low bits */ \
- /* Now, r3 == VSID (mod 2^36-1), and lies between 0 and \
+ /* NOTE: explanation based on VSID_BITS_##size = 36 \
+ * Now, r3 == VSID (mod 2^36-1), and lies between 0 and \
* 2^36-1+2^28-1. That in particular means that if r3 >= \
* 2^36-1, then r3+1 has the 2^36 bit set. So, if r3+1 has \
* the bit clear, r3 already has the answer we want, if it \
@@ -513,34 +521,6 @@
})
#endif /* 1 */
-/*
- * This is only valid for addresses >= PAGE_OFFSET
- * The proto-VSID space is divided into two class
- * User: 0 to 2^(CONTEXT_BITS + USER_ESID_BITS) -1
- * kernel: 2^(CONTEXT_BITS + USER_ESID_BITS) to 2^(VSID_BITS) - 1
- *
- * With KERNEL_START at 0xc000000000000000, the proto vsid for
- * the kernel ends up with 0xc00000000 (36 bits). With 64TB
- * support we need to have kernel proto-VSID in the
- * [2^37 to 2^38 - 1] range due to the increased USER_ESID_BITS.
- */
-static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
-{
- unsigned long proto_vsid;
- /*
- * We need to make sure proto_vsid for the kernel is
- * >= 2^(CONTEXT_BITS + USER_ESID_BITS[_1T])
- */
- if (ssize == MMU_SEGSIZE_256M) {
- proto_vsid = ea >> SID_SHIFT;
- proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS));
- return vsid_scramble(proto_vsid, 256M);
- }
- proto_vsid = ea >> SID_SHIFT_1T;
- proto_vsid |= (1UL << (CONTEXT_BITS + USER_ESID_BITS_1T));
- return vsid_scramble(proto_vsid, 1T);
-}
-
/* Returns the segment size indicator for a user address */
static inline int user_segment_size(unsigned long addr)
{
@@ -550,17 +530,41 @@
return MMU_SEGSIZE_256M;
}
-/* This is only valid for user addresses (which are below 2^44) */
static inline unsigned long get_vsid(unsigned long context, unsigned long ea,
int ssize)
{
+ /*
+ * Bad address. We return VSID 0 for that
+ */
+ if ((ea & ~REGION_MASK) >= PGTABLE_RANGE)
+ return 0;
+
if (ssize == MMU_SEGSIZE_256M)
- return vsid_scramble((context << USER_ESID_BITS)
+ return vsid_scramble((context << ESID_BITS)
| (ea >> SID_SHIFT), 256M);
- return vsid_scramble((context << USER_ESID_BITS_1T)
+ return vsid_scramble((context << ESID_BITS_1T)
| (ea >> SID_SHIFT_1T), 1T);
}
+/*
+ * This is only valid for addresses >= PAGE_OFFSET
+ *
+ * For kernel space, we use the top 4 context ids to map address as below
+ * 0x7fffc - [ 0xc000000000000000 - 0xc0003fffffffffff ]
+ * 0x7fffd - [ 0xd000000000000000 - 0xd0003fffffffffff ]
+ * 0x7fffe - [ 0xe000000000000000 - 0xe0003fffffffffff ]
+ * 0x7ffff - [ 0xf000000000000000 - 0xf0003fffffffffff ]
+ */
+static inline unsigned long get_kernel_vsid(unsigned long ea, int ssize)
+{
+ unsigned long context;
+
+ /*
+ * kernel take the top 4 context from the available range
+ */
+ context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1;
+ return get_vsid(context, ea, ssize);
+}
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_MMU_HASH64_H_ */
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 75a3d71..19599ef 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -275,7 +275,7 @@
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_POWER4 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
- .mmu_features = MMU_FTR_HPTE_TABLE,
+ .mmu_features = MMU_FTRS_PPC970,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 87ef8f5..200afa5 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -1452,20 +1452,36 @@
_GLOBAL(do_stab_bolted)
stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */
std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */
+ mfspr r11,SPRN_DAR /* ea */
+ /*
+ * check for bad kernel/user address
+ * (ea & ~REGION_MASK) >= PGTABLE_RANGE
+ */
+ rldicr. r9,r11,4,(63 - 46 - 4)
+ li r9,0 /* VSID = 0 for bad address */
+ bne- 0f
+
+ /*
+ * Calculate VSID:
+ * This is the kernel vsid, we take the top for context from
+ * the range. context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+ * Here we know that (ea >> 60) == 0xc
+ */
+ lis r9,(MAX_USER_CONTEXT + 1)@ha
+ addi r9,r9,(MAX_USER_CONTEXT + 1)@l
+
+ srdi r10,r11,SID_SHIFT
+ rldimi r10,r9,ESID_BITS,0 /* proto vsid */
+ ASM_VSID_SCRAMBLE(r10, r9, 256M)
+ rldic r9,r10,12,16 /* r9 = vsid << 12 */
+
+0:
/* Hash to the primary group */
ld r10,PACASTABVIRT(r13)
- mfspr r11,SPRN_DAR
- srdi r11,r11,28
+ srdi r11,r11,SID_SHIFT
rldimi r10,r11,7,52 /* r10 = first ste of the group */
- /* Calculate VSID */
- /* This is a kernel address, so protovsid = ESID | 1 << 37 */
- li r9,0x1
- rldimi r11,r9,(CONTEXT_BITS + USER_ESID_BITS),0
- ASM_VSID_SCRAMBLE(r11, r9, 256M)
- rldic r9,r11,12,16 /* r9 = vsid << 12 */
-
/* Search the primary group for a free entry */
1: ld r11,0(r10) /* Test valid bit of the current ste */
andi. r11,r11,0x80
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 7f7fb7f..13f8d16 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -2832,11 +2832,13 @@
{
}
#else
-static void __reloc_toc(void *tocstart, unsigned long offset,
- unsigned long nr_entries)
+static void __reloc_toc(unsigned long offset, unsigned long nr_entries)
{
unsigned long i;
- unsigned long *toc_entry = (unsigned long *)tocstart;
+ unsigned long *toc_entry;
+
+ /* Get the start of the TOC by using r2 directly. */
+ asm volatile("addi %0,2,-0x8000" : "=b" (toc_entry));
for (i = 0; i < nr_entries; i++) {
*toc_entry = *toc_entry + offset;
@@ -2850,8 +2852,7 @@
unsigned long nr_entries =
(__prom_init_toc_end - __prom_init_toc_start) / sizeof(long);
- /* Need to add offset to get at __prom_init_toc_start */
- __reloc_toc(__prom_init_toc_start + offset, offset, nr_entries);
+ __reloc_toc(offset, nr_entries);
mb();
}
@@ -2864,8 +2865,7 @@
mb();
- /* __prom_init_toc_start has been relocated, no need to add offset */
- __reloc_toc(__prom_init_toc_start, -offset, nr_entries);
+ __reloc_toc(-offset, nr_entries);
}
#endif
#endif
diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c
index 245c1b6..f9b30c6 100644
--- a/arch/powerpc/kernel/ptrace.c
+++ b/arch/powerpc/kernel/ptrace.c
@@ -1428,6 +1428,7 @@
brk.address = bp_info->addr & ~7UL;
brk.type = HW_BRK_TYPE_TRANSLATE;
+ brk.len = 8;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ)
brk.type |= HW_BRK_TYPE_READ;
if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE)
diff --git a/arch/powerpc/kvm/book3s_64_mmu_host.c b/arch/powerpc/kvm/book3s_64_mmu_host.c
index ead58e3..5d7d29a 100644
--- a/arch/powerpc/kvm/book3s_64_mmu_host.c
+++ b/arch/powerpc/kvm/book3s_64_mmu_host.c
@@ -326,8 +326,8 @@
vcpu3s->context_id[0] = err;
vcpu3s->proto_vsid_max = ((vcpu3s->context_id[0] + 1)
- << USER_ESID_BITS) - 1;
- vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << USER_ESID_BITS;
+ << ESID_BITS) - 1;
+ vcpu3s->proto_vsid_first = vcpu3s->context_id[0] << ESID_BITS;
vcpu3s->proto_vsid_next = vcpu3s->proto_vsid_first;
kvmppc_mmu_hpte_init(vcpu);
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 1b6e127..f410c3e 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -195,6 +195,11 @@
unsigned long vpn = hpt_vpn(vaddr, vsid, ssize);
unsigned long tprot = prot;
+ /*
+ * If we hit a bad address return error.
+ */
+ if (!vsid)
+ return -1;
/* Make kernel text executable */
if (overlaps_kernel_text(vaddr, vaddr + step))
tprot &= ~HPTE_R_N;
@@ -759,6 +764,8 @@
/* Initialize stab / SLB management */
if (mmu_has_feature(MMU_FTR_SLB))
slb_initialize();
+ else
+ stab_initialize(get_paca()->stab_real);
}
#ifdef CONFIG_SMP
@@ -922,11 +929,6 @@
DBG_LOW("hash_page(ea=%016lx, access=%lx, trap=%lx\n",
ea, access, trap);
- if ((ea & ~REGION_MASK) >= PGTABLE_RANGE) {
- DBG_LOW(" out of pgtable range !\n");
- return 1;
- }
-
/* Get region & vsid */
switch (REGION_ID(ea)) {
case USER_REGION_ID:
@@ -957,6 +959,11 @@
}
DBG_LOW(" mm=%p, mm->pgdir=%p, vsid=%016lx\n", mm, mm->pgd, vsid);
+ /* Bad address. */
+ if (!vsid) {
+ DBG_LOW("Bad address!\n");
+ return 1;
+ }
/* Get pgdir */
pgdir = mm->pgd;
if (pgdir == NULL)
@@ -1126,6 +1133,8 @@
/* Get VSID */
ssize = user_segment_size(ea);
vsid = get_vsid(mm->context.id, ea, ssize);
+ if (!vsid)
+ return;
/* Hash doesn't like irqs */
local_irq_save(flags);
@@ -1233,6 +1242,9 @@
hash = hpt_hash(vpn, PAGE_SHIFT, mmu_kernel_ssize);
hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP);
+ /* Don't create HPTE entries for bad address */
+ if (!vsid)
+ return;
ret = ppc_md.hpte_insert(hpteg, vpn, __pa(vaddr),
mode, HPTE_V_BOLTED,
mmu_linear_psize, mmu_kernel_ssize);
diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c
index 40bc5b0..d1d1b92 100644
--- a/arch/powerpc/mm/mmu_context_hash64.c
+++ b/arch/powerpc/mm/mmu_context_hash64.c
@@ -29,15 +29,6 @@
static DEFINE_SPINLOCK(mmu_context_lock);
static DEFINE_IDA(mmu_context_ida);
-/*
- * 256MB segment
- * The proto-VSID space has 2^(CONTEX_BITS + USER_ESID_BITS) - 1 segments
- * available for user mappings. Each segment contains 2^28 bytes. Each
- * context maps 2^46 bytes (64TB) so we can support 2^19-1 contexts
- * (19 == 37 + 28 - 46).
- */
-#define MAX_CONTEXT ((1UL << CONTEXT_BITS) - 1)
-
int __init_new_context(void)
{
int index;
@@ -56,7 +47,7 @@
else if (err)
return err;
- if (index > MAX_CONTEXT) {
+ if (index > MAX_USER_CONTEXT) {
spin_lock(&mmu_context_lock);
ida_remove(&mmu_context_ida, index);
spin_unlock(&mmu_context_lock);
diff --git a/arch/powerpc/mm/pgtable_64.c b/arch/powerpc/mm/pgtable_64.c
index e212a27..654258f 100644
--- a/arch/powerpc/mm/pgtable_64.c
+++ b/arch/powerpc/mm/pgtable_64.c
@@ -61,7 +61,7 @@
#endif
#ifdef CONFIG_PPC_STD_MMU_64
-#if TASK_SIZE_USER64 > (1UL << (USER_ESID_BITS + SID_SHIFT))
+#if TASK_SIZE_USER64 > (1UL << (ESID_BITS + SID_SHIFT))
#error TASK_SIZE_USER64 exceeds user VSID range
#endif
#endif
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index 1a16ca2..17aa6df 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -31,10 +31,15 @@
* No other registers are examined or changed.
*/
_GLOBAL(slb_allocate_realmode)
- /* r3 = faulting address */
+ /*
+ * check for bad kernel/user address
+ * (ea & ~REGION_MASK) >= PGTABLE_RANGE
+ */
+ rldicr. r9,r3,4,(63 - 46 - 4)
+ bne- 8f
srdi r9,r3,60 /* get region */
- srdi r10,r3,28 /* get esid */
+ srdi r10,r3,SID_SHIFT /* get esid */
cmpldi cr7,r9,0xc /* cmp PAGE_OFFSET for later use */
/* r3 = address, r10 = esid, cr7 = <> PAGE_OFFSET */
@@ -56,12 +61,14 @@
*/
_GLOBAL(slb_miss_kernel_load_linear)
li r11,0
- li r9,0x1
/*
- * for 1T we shift 12 bits more. slb_finish_load_1T will do
- * the necessary adjustment
+ * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+ * r9 = region id.
*/
- rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
+ addis r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
+ addi r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
+
+
BEGIN_FTR_SECTION
b slb_finish_load
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
@@ -91,24 +98,19 @@
_GLOBAL(slb_miss_kernel_load_io)
li r11,0
6:
- li r9,0x1
/*
- * for 1T we shift 12 bits more. slb_finish_load_1T will do
- * the necessary adjustment
+ * context = (MAX_USER_CONTEXT) + ((ea >> 60) - 0xc) + 1
+ * r9 = region id.
*/
- rldimi r10,r9,(CONTEXT_BITS + USER_ESID_BITS),0
+ addis r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@ha
+ addi r9,r9,(MAX_USER_CONTEXT - 0xc + 1)@l
+
BEGIN_FTR_SECTION
b slb_finish_load
END_MMU_FTR_SECTION_IFCLR(MMU_FTR_1T_SEGMENT)
b slb_finish_load_1T
-0: /* user address: proto-VSID = context << 15 | ESID. First check
- * if the address is within the boundaries of the user region
- */
- srdi. r9,r10,USER_ESID_BITS
- bne- 8f /* invalid ea bits set */
-
-
+0:
/* when using slices, we extract the psize off the slice bitmaps
* and then we need to get the sllp encoding off the mmu_psize_defs
* array.
@@ -164,15 +166,13 @@
ld r9,PACACONTEXTID(r13)
BEGIN_FTR_SECTION
cmpldi r10,0x1000
-END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
- rldimi r10,r9,USER_ESID_BITS,0
-BEGIN_FTR_SECTION
bge slb_finish_load_1T
END_MMU_FTR_SECTION_IFSET(MMU_FTR_1T_SEGMENT)
b slb_finish_load
8: /* invalid EA */
li r10,0 /* BAD_VSID */
+ li r9,0 /* BAD_VSID */
li r11,SLB_VSID_USER /* flags don't much matter */
b slb_finish_load
@@ -221,8 +221,6 @@
/* get context to calculate proto-VSID */
ld r9,PACACONTEXTID(r13)
- rldimi r10,r9,USER_ESID_BITS,0
-
/* fall through slb_finish_load */
#endif /* __DISABLED__ */
@@ -231,9 +229,10 @@
/*
* Finish loading of an SLB entry and return
*
- * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
+ * r3 = EA, r9 = context, r10 = ESID, r11 = flags, clobbers r9, cr7 = <> PAGE_OFFSET
*/
slb_finish_load:
+ rldimi r10,r9,ESID_BITS,0
ASM_VSID_SCRAMBLE(r10,r9,256M)
/*
* bits above VSID_BITS_256M need to be ignored from r10
@@ -298,10 +297,11 @@
/*
* Finish loading of a 1T SLB entry (for the kernel linear mapping) and return.
*
- * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9
+ * r3 = EA, r9 = context, r10 = ESID(256MB), r11 = flags, clobbers r9
*/
slb_finish_load_1T:
- srdi r10,r10,40-28 /* get 1T ESID */
+ srdi r10,r10,(SID_SHIFT_1T - SID_SHIFT) /* get 1T ESID */
+ rldimi r10,r9,ESID_BITS_1T,0
ASM_VSID_SCRAMBLE(r10,r9,1T)
/*
* bits above VSID_BITS_1T need to be ignored from r10
diff --git a/arch/powerpc/mm/tlb_hash64.c b/arch/powerpc/mm/tlb_hash64.c
index 0d82ef5..023ec8a 100644
--- a/arch/powerpc/mm/tlb_hash64.c
+++ b/arch/powerpc/mm/tlb_hash64.c
@@ -82,11 +82,11 @@
if (!is_kernel_addr(addr)) {
ssize = user_segment_size(addr);
vsid = get_vsid(mm->context.id, addr, ssize);
- WARN_ON(vsid == 0);
} else {
vsid = get_kernel_vsid(addr, mmu_kernel_ssize);
ssize = mmu_kernel_ssize;
}
+ WARN_ON(vsid == 0);
vpn = hpt_vpn(addr, vsid, ssize);
rpte = __real_pte(__pte(pte), ptep);
diff --git a/arch/powerpc/platforms/85xx/sgy_cts1000.c b/arch/powerpc/platforms/85xx/sgy_cts1000.c
index 611e92f..7179726 100644
--- a/arch/powerpc/platforms/85xx/sgy_cts1000.c
+++ b/arch/powerpc/platforms/85xx/sgy_cts1000.c
@@ -69,7 +69,7 @@
return IRQ_HANDLED;
};
-static int __devinit gpio_halt_probe(struct platform_device *pdev)
+static int gpio_halt_probe(struct platform_device *pdev)
{
enum of_gpio_flags flags;
struct device_node *node = pdev->dev.of_node;
@@ -128,7 +128,7 @@
return 0;
}
-static int __devexit gpio_halt_remove(struct platform_device *pdev)
+static int gpio_halt_remove(struct platform_device *pdev)
{
if (halt_node) {
int gpio = of_get_gpio(halt_node, 0);
@@ -165,7 +165,7 @@
.of_match_table = gpio_halt_match,
},
.probe = gpio_halt_probe,
- .remove = __devexit_p(gpio_halt_remove),
+ .remove = gpio_halt_remove,
};
module_platform_driver(gpio_halt_driver);
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index cea2f09..18e3b76 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -124,9 +124,8 @@
select PPC_HAVE_PMU_SUPPORT
config POWER3
- bool
depends on PPC64 && PPC_BOOK3S
- default y if !POWER4_ONLY
+ def_bool y
config POWER4
depends on PPC64 && PPC_BOOK3S
@@ -145,8 +144,7 @@
but somewhat slower on other machines. This option only changes
the scheduling of instructions, not the selection of instructions
itself, so the resulting kernel will keep running on all other
- machines. When building a kernel that is supposed to run only
- on Cell, you should also select the POWER4_ONLY option.
+ machines.
# this is temp to handle compat with arch=ppc
config 8xx
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 4b50537..eb8fb62 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -134,7 +134,7 @@
select HAVE_SYSCALL_WRAPPERS
select HAVE_UID16 if 32BIT
select HAVE_VIRT_CPU_ACCOUNTING
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select INIT_ALL_POSSIBLE
select KTIME_SCALAR if 32BIT
select MODULES_USE_ELF_RELA
diff --git a/arch/s390/include/asm/eadm.h b/arch/s390/include/asm/eadm.h
index 8d48471..dc9200c 100644
--- a/arch/s390/include/asm/eadm.h
+++ b/arch/s390/include/asm/eadm.h
@@ -34,6 +34,8 @@
u32 reserved[4];
} __packed;
+#define EQC_WR_PROHIBIT 22
+
struct msb {
u8 fmt:4;
u8 oc:4;
@@ -96,11 +98,13 @@
#define OP_STATE_TEMP_ERR 2
#define OP_STATE_PERM_ERR 3
+enum scm_event {SCM_CHANGE, SCM_AVAIL};
+
struct scm_driver {
struct device_driver drv;
int (*probe) (struct scm_device *scmdev);
int (*remove) (struct scm_device *scmdev);
- void (*notify) (struct scm_device *scmdev);
+ void (*notify) (struct scm_device *scmdev, enum scm_event event);
void (*handler) (struct scm_device *scmdev, void *data, int error);
};
diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h
index 1d8fe2b..6b32af3 100644
--- a/arch/s390/include/asm/tlbflush.h
+++ b/arch/s390/include/asm/tlbflush.h
@@ -74,8 +74,6 @@
static inline void __tlb_flush_mm(struct mm_struct * mm)
{
- if (unlikely(cpumask_empty(mm_cpumask(mm))))
- return;
/*
* If the machine has IDTE we prefer to do a per mm flush
* on all cpus instead of doing a local flush if the mm
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index 5502285..94feff7 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -636,7 +636,8 @@
UPDATE_VTIME %r14,%r15,__LC_MCCK_ENTER_TIMER
mcck_skip:
SWITCH_ASYNC __LC_GPREGS_SAVE_AREA+32,__LC_PANIC_STACK,PAGE_SHIFT
- mvc __PT_R0(64,%r11),__LC_GPREGS_SAVE_AREA
+ stm %r0,%r7,__PT_R0(%r11)
+ mvc __PT_R8(32,%r11),__LC_GPREGS_SAVE_AREA+32
stm %r8,%r9,__PT_PSW(%r11)
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15)
l %r1,BASED(.Ldo_machine_check)
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 9c837c1..2e6d60c 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -678,8 +678,9 @@
UPDATE_VTIME %r14,__LC_MCCK_ENTER_TIMER
LAST_BREAK %r14
mcck_skip:
- lghi %r14,__LC_GPREGS_SAVE_AREA
- mvc __PT_R0(128,%r11),0(%r14)
+ lghi %r14,__LC_GPREGS_SAVE_AREA+64
+ stmg %r0,%r7,__PT_R0(%r11)
+ mvc __PT_R8(64,%r11),0(%r14)
stmg %r8,%r9,__PT_PSW(%r11)
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15)
lgr %r2,%r11 # pass pointer to pt_regs
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index a5360de..2926885 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -571,6 +571,8 @@
/* Split remaining virtual space between 1:1 mapping & vmemmap array */
tmp = VMALLOC_START / (PAGE_SIZE + sizeof(struct page));
+ /* vmemmap contains a multiple of PAGES_PER_SECTION struct pages */
+ tmp = SECTION_ALIGN_UP(tmp);
tmp = VMALLOC_START - tmp * sizeof(struct page);
tmp &= ~((vmax >> 11) - 1); /* align to page table level */
tmp = min(tmp, 1UL << MAX_PHYSMEM_BITS);
diff --git a/arch/score/Kconfig b/arch/score/Kconfig
index e569aa1..c8def8b 100644
--- a/arch/score/Kconfig
+++ b/arch/score/Kconfig
@@ -12,7 +12,7 @@
select GENERIC_CPU_DEVICES
select GENERIC_CLOCKEVENTS
select HAVE_MOD_ARCH_SPECIFIC
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select MODULES_USE_ELF_REL
select CLONE_BACKWARDS
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index ff496ab..25877ae 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -17,7 +17,7 @@
select GENERIC_IRQ_SHOW
select HAVE_DEBUG_BUGVERBOSE
select HAVE_SYSCALL_WRAPPERS if TILEGX
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select SYS_HYPERVISOR
select ARCH_HAVE_NMI_SAFE_CMPXCHG
select GENERIC_CLOCKEVENTS
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index dc50b15..2943e3a 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -9,7 +9,7 @@
select GENERIC_ATOMIC64
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select ARCH_HAVE_CUSTOM_GPIO_H
select GENERIC_FIND_FIRST_BIT
select GENERIC_IRQ_PROBE
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a4f24f5..70c0f3d 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -112,7 +112,7 @@
select GENERIC_STRNLEN_USER
select HAVE_CONTEXT_TRACKING if X86_64
select HAVE_IRQ_TIME_ACCOUNTING
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select MODULES_USE_ELF_REL if X86_32
select MODULES_USE_ELF_RELA if X86_64
select CLONE_BACKWARDS if X86_32
diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c
index 826054a..b05a575 100644
--- a/arch/x86/kernel/cpu/perf_event_intel_ds.c
+++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c
@@ -729,3 +729,13 @@
}
}
}
+
+void perf_restore_debug_store(void)
+{
+ struct debug_store *ds = __this_cpu_read(cpu_hw_events.ds);
+
+ if (!x86_pmu.bts && !x86_pmu.pebs)
+ return;
+
+ wrmsrl(MSR_IA32_DS_AREA, (unsigned long)ds);
+}
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 120cee1..3c68768 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -11,6 +11,7 @@
#include <linux/suspend.h>
#include <linux/export.h>
#include <linux/smp.h>
+#include <linux/perf_event.h>
#include <asm/pgtable.h>
#include <asm/proto.h>
@@ -228,6 +229,7 @@
do_fpu_end();
x86_platform.restore_sched_clock_state();
mtrr_bp_restore();
+ perf_restore_debug_store();
}
/* Needed by apm.c */
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 35876ff..b09de49 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -9,7 +9,7 @@
select HAVE_IDE
select GENERIC_ATOMIC64
select HAVE_GENERIC_HARDIRQS
- select HAVE_VIRT_TO_BUS
+ select VIRT_TO_BUS
select GENERIC_IRQ_SHOW
select GENERIC_CPU_DEVICES
select MODULES_USE_ELF_RELA
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 53e7ac9..e854582 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -465,7 +465,7 @@
return result;
}
-static int acpi_processor_get_performance_info(struct acpi_processor *pr)
+int acpi_processor_get_performance_info(struct acpi_processor *pr)
{
int result = 0;
acpi_status status = AE_OK;
@@ -509,7 +509,7 @@
#endif
return result;
}
-
+EXPORT_SYMBOL_GPL(acpi_processor_get_performance_info);
int acpi_processor_notify_smm(struct module *calling_module)
{
acpi_status status;
diff --git a/drivers/amba/tegra-ahb.c b/drivers/amba/tegra-ahb.c
index 093c435..1f44e56 100644
--- a/drivers/amba/tegra-ahb.c
+++ b/drivers/amba/tegra-ahb.c
@@ -158,7 +158,7 @@
EXPORT_SYMBOL(tegra_ahb_enable_smmu);
#endif
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM
static int tegra_ahb_suspend(struct device *dev)
{
int i;
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
index 10fd71c..6bf4d47 100644
--- a/drivers/char/hw_random/virtio-rng.c
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -92,14 +92,22 @@
{
int err;
+ if (vq) {
+ /* We only support one device for now */
+ return -EBUSY;
+ }
/* We expect a single virtqueue. */
vq = virtio_find_single_vq(vdev, random_recv_done, "input");
- if (IS_ERR(vq))
- return PTR_ERR(vq);
+ if (IS_ERR(vq)) {
+ err = PTR_ERR(vq);
+ vq = NULL;
+ return err;
+ }
err = hwrng_register(&virtio_hwrng);
if (err) {
vdev->config->del_vqs(vdev);
+ vq = NULL;
return err;
}
@@ -112,6 +120,7 @@
busy = false;
hwrng_unregister(&virtio_hwrng);
vdev->config->del_vqs(vdev);
+ vq = NULL;
}
static int virtrng_probe(struct virtio_device *vdev)
diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c
index b5538bb..09c6331 100644
--- a/drivers/clk/clk-vt8500.c
+++ b/drivers/clk/clk-vt8500.c
@@ -157,7 +157,7 @@
divisor = parent_rate / rate;
/* If prate / rate would be decimal, incr the divisor */
- if (rate * divisor < *prate)
+ if (rate * divisor < parent_rate)
divisor++;
if (divisor == cdev->div_mask + 1)
diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
index 143ce1f..1e2de73 100644
--- a/drivers/clk/tegra/clk-tegra20.c
+++ b/drivers/clk/tegra/clk-tegra20.c
@@ -1292,7 +1292,6 @@
TEGRA_CLK_DUPLICATE(usbd, "tegra-ehci.0", NULL),
TEGRA_CLK_DUPLICATE(usbd, "tegra-otg", NULL),
TEGRA_CLK_DUPLICATE(cclk, NULL, "cpu"),
- TEGRA_CLK_DUPLICATE(twd, "smp_twd", NULL),
TEGRA_CLK_DUPLICATE(clk_max, NULL, NULL), /* Must be the last entry */
};
diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
index 32c61cb..ba6f51b 100644
--- a/drivers/clk/tegra/clk-tegra30.c
+++ b/drivers/clk/tegra/clk-tegra30.c
@@ -1931,7 +1931,6 @@
TEGRA_CLK_DUPLICATE(cml1, "tegra_sata_cml", NULL),
TEGRA_CLK_DUPLICATE(cml0, "tegra_pcie", "cml"),
TEGRA_CLK_DUPLICATE(pciex, "tegra_pcie", "pciex"),
- TEGRA_CLK_DUPLICATE(twd, "smp_twd", NULL),
TEGRA_CLK_DUPLICATE(vcp, "nvavp", "vcp"),
TEGRA_CLK_DUPLICATE(clk_max, NULL, NULL), /* MUST be the last entry */
};
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 7472182..61a6fde 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -42,6 +42,7 @@
#include <linux/io.h>
#include <linux/of_irq.h>
#include <linux/of_device.h>
+#include <linux/clk.h>
#include <linux/pinctrl/consumer.h>
/*
@@ -496,6 +497,7 @@
struct resource *res;
struct irq_chip_generic *gc;
struct irq_chip_type *ct;
+ struct clk *clk;
unsigned int ngpios;
int soc_variant;
int i, cpu, id;
@@ -529,6 +531,11 @@
return id;
}
+ clk = devm_clk_get(&pdev->dev, NULL);
+ /* Not all SoCs require a clock.*/
+ if (!IS_ERR(clk))
+ clk_prepare_enable(clk);
+
mvchip->soc_variant = soc_variant;
mvchip->chip.label = dev_name(&pdev->dev);
mvchip->chip.dev = &pdev->dev;
diff --git a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
index 5fa1326..02e369f 100644
--- a/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
+++ b/drivers/gpu/drm/nouveau/core/engine/disp/nv50.c
@@ -544,13 +544,13 @@
static void
nv50_disp_base_vblank_enable(struct nouveau_event *event, int head)
{
- nv_mask(event->priv, 0x61002c, (1 << head), (1 << head));
+ nv_mask(event->priv, 0x61002c, (4 << head), (4 << head));
}
static void
nv50_disp_base_vblank_disable(struct nouveau_event *event, int head)
{
- nv_mask(event->priv, 0x61002c, (1 << head), (0 << head));
+ nv_mask(event->priv, 0x61002c, (4 << head), 0);
}
static int
diff --git a/drivers/gpu/drm/nouveau/nouveau_abi16.c b/drivers/gpu/drm/nouveau/nouveau_abi16.c
index 4124192..3b6dc88 100644
--- a/drivers/gpu/drm/nouveau/nouveau_abi16.c
+++ b/drivers/gpu/drm/nouveau/nouveau_abi16.c
@@ -116,6 +116,11 @@
{
struct nouveau_abi16_ntfy *ntfy, *temp;
+ /* wait for all activity to stop before releasing notify object, which
+ * may be still in use */
+ if (chan->chan && chan->ntfy)
+ nouveau_channel_idle(chan->chan);
+
/* cleanup notifier state */
list_for_each_entry_safe(ntfy, temp, &chan->notifiers, head) {
nouveau_abi16_ntfy_fini(chan, ntfy);
diff --git a/drivers/gpu/drm/nouveau/nouveau_bo.c b/drivers/gpu/drm/nouveau/nouveau_bo.c
index 11ca821..7ff1071 100644
--- a/drivers/gpu/drm/nouveau/nouveau_bo.c
+++ b/drivers/gpu/drm/nouveau/nouveau_bo.c
@@ -801,7 +801,7 @@
stride = 16 * 4;
height = amount / stride;
- if (new_mem->mem_type == TTM_PL_VRAM &&
+ if (old_mem->mem_type == TTM_PL_VRAM &&
nouveau_bo_tile_layout(nvbo)) {
ret = RING_SPACE(chan, 8);
if (ret)
@@ -823,7 +823,7 @@
BEGIN_NV04(chan, NvSubCopy, 0x0200, 1);
OUT_RING (chan, 1);
}
- if (old_mem->mem_type == TTM_PL_VRAM &&
+ if (new_mem->mem_type == TTM_PL_VRAM &&
nouveau_bo_tile_layout(nvbo)) {
ret = RING_SPACE(chan, 8);
if (ret)
diff --git a/drivers/gpu/drm/nouveau/nv50_display.c b/drivers/gpu/drm/nouveau/nv50_display.c
index 87a5a56..2db5799 100644
--- a/drivers/gpu/drm/nouveau/nv50_display.c
+++ b/drivers/gpu/drm/nouveau/nv50_display.c
@@ -2276,6 +2276,7 @@
NV_WARN(drm, "failed to create encoder %d/%d/%d: %d\n",
dcbe->location, dcbe->type,
ffs(dcbe->or) - 1, ret);
+ ret = 0;
}
}
diff --git a/drivers/hwmon/lineage-pem.c b/drivers/hwmon/lineage-pem.c
index 41df29f..ebbb9f4 100644
--- a/drivers/hwmon/lineage-pem.c
+++ b/drivers/hwmon/lineage-pem.c
@@ -422,6 +422,7 @@
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_curr1_input.dev_attr.attr,
&sensor_dev_attr_power1_input.dev_attr.attr,
+ NULL
};
static const struct attribute_group pem_input_group = {
@@ -432,6 +433,7 @@
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan3_input.dev_attr.attr,
+ NULL
};
static const struct attribute_group pem_fan_group = {
diff --git a/drivers/hwmon/lm75.h b/drivers/hwmon/lm75.h
index 668ff47..5cde94e 100644
--- a/drivers/hwmon/lm75.h
+++ b/drivers/hwmon/lm75.h
@@ -25,7 +25,7 @@
which contains this code, we don't worry about the wasted space.
*/
-#include <linux/hwmon.h>
+#include <linux/kernel.h>
/* straight from the datasheet */
#define LM75_TEMP_MIN (-55000)
diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
index a58de38..6d61307 100644
--- a/drivers/hwmon/pmbus/ltc2978.c
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -59,7 +59,7 @@
struct ltc2978_data {
enum chips id;
int vin_min, vin_max;
- int temp_min, temp_max;
+ int temp_min, temp_max[2];
int vout_min[8], vout_max[8];
int iout_max[2];
int temp2_max;
@@ -113,9 +113,10 @@
ret = pmbus_read_word_data(client, page,
LTC2978_MFR_TEMPERATURE_PEAK);
if (ret >= 0) {
- if (lin11_to_val(ret) > lin11_to_val(data->temp_max))
- data->temp_max = ret;
- ret = data->temp_max;
+ if (lin11_to_val(ret)
+ > lin11_to_val(data->temp_max[page]))
+ data->temp_max[page] = ret;
+ ret = data->temp_max[page];
}
break;
case PMBUS_VIRT_RESET_VOUT_HISTORY:
@@ -266,7 +267,7 @@
break;
case PMBUS_VIRT_RESET_TEMP_HISTORY:
data->temp_min = 0x7bff;
- data->temp_max = 0x7c00;
+ data->temp_max[page] = 0x7c00;
ret = ltc2978_clear_peaks(client, page, data->id);
break;
default:
@@ -323,7 +324,8 @@
data->vin_min = 0x7bff;
data->vin_max = 0x7c00;
data->temp_min = 0x7bff;
- data->temp_max = 0x7c00;
+ for (i = 0; i < ARRAY_SIZE(data->temp_max); i++)
+ data->temp_max[i] = 0x7c00;
data->temp2_max = 0x7c00;
switch (data->id) {
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index 80eef50..9add6092 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -766,12 +766,14 @@
static int pmbus_add_attribute(struct pmbus_data *data, struct attribute *attr)
{
if (data->num_attributes >= data->max_attributes - 1) {
- data->max_attributes += PMBUS_ATTR_ALLOC_SIZE;
- data->group.attrs = krealloc(data->group.attrs,
- sizeof(struct attribute *) *
- data->max_attributes, GFP_KERNEL);
- if (data->group.attrs == NULL)
+ int new_max_attrs = data->max_attributes + PMBUS_ATTR_ALLOC_SIZE;
+ void *new_attrs = krealloc(data->group.attrs,
+ new_max_attrs * sizeof(void *),
+ GFP_KERNEL);
+ if (!new_attrs)
return -ENOMEM;
+ data->group.attrs = new_attrs;
+ data->max_attributes = new_max_attrs;
}
data->group.attrs[data->num_attributes++] = attr;
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 46cde098..e380c6e 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -4,7 +4,6 @@
menuconfig I2C
tristate "I2C support"
- depends on !S390
select RT_MUTEXES
---help---
I2C (pronounce: I-squared-C) is a slow serial bus protocol used in
@@ -76,6 +75,7 @@
config I2C_SMBUS
tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
+ depends on GENERIC_HARDIRQS
help
Say Y here if you want support for SMBus extensions to the I2C
specification. At the moment, the only supported extension is
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a3725de..adfee98 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -114,7 +114,7 @@
config I2C_ISCH
tristate "Intel SCH SMBus 1.0"
- depends on PCI
+ depends on PCI && GENERIC_HARDIRQS
select LPC_SCH
help
Say Y here if you want to use SMBus controller on the Intel SCH
@@ -543,6 +543,7 @@
config I2C_OCORES
tristate "OpenCores I2C Controller"
+ depends on GENERIC_HARDIRQS
help
If you say yes to this option, support will be included for the
OpenCores I2C controller. For details see
@@ -777,7 +778,7 @@
config I2C_PARPORT
tristate "Parallel port adapter"
- depends on PARPORT
+ depends on PARPORT && GENERIC_HARDIRQS
select I2C_ALGOBIT
select I2C_SMBUS
help
@@ -802,6 +803,7 @@
config I2C_PARPORT_LIGHT
tristate "Parallel port adapter (light)"
+ depends on GENERIC_HARDIRQS
select I2C_ALGOBIT
select I2C_SMBUS
help
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 0198324..bd33473 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -62,7 +62,7 @@
int st_sensors_set_odr(struct iio_dev *indio_dev, unsigned int odr)
{
int err;
- struct st_sensor_odr_avl odr_out;
+ struct st_sensor_odr_avl odr_out = {0, 0};
struct st_sensor_data *sdata = iio_priv(indio_dev);
err = st_sensors_match_odr(sdata->sensor, odr, &odr_out);
@@ -114,7 +114,7 @@
static int st_sensors_set_fullscale(struct iio_dev *indio_dev, unsigned int fs)
{
- int err, i;
+ int err, i = 0;
struct st_sensor_data *sdata = iio_priv(indio_dev);
err = st_sensors_match_fs(sdata->sensor, fs, &i);
@@ -139,14 +139,13 @@
int st_sensors_set_enable(struct iio_dev *indio_dev, bool enable)
{
- bool found;
u8 tmp_value;
int err = -EINVAL;
- struct st_sensor_odr_avl odr_out;
+ bool found = false;
+ struct st_sensor_odr_avl odr_out = {0, 0};
struct st_sensor_data *sdata = iio_priv(indio_dev);
if (enable) {
- found = false;
tmp_value = sdata->sensor->pw.value_on;
if ((sdata->sensor->odr.addr == sdata->sensor->pw.addr) &&
(sdata->sensor->odr.mask == sdata->sensor->pw.mask)) {
diff --git a/drivers/iio/dac/ad5064.c b/drivers/iio/dac/ad5064.c
index 2fe1d4e..74f2d52 100644
--- a/drivers/iio/dac/ad5064.c
+++ b/drivers/iio/dac/ad5064.c
@@ -27,7 +27,6 @@
#define AD5064_ADDR(x) ((x) << 20)
#define AD5064_CMD(x) ((x) << 24)
-#define AD5064_ADDR_DAC(chan) (chan)
#define AD5064_ADDR_ALL_DAC 0xF
#define AD5064_CMD_WRITE_INPUT_N 0x0
@@ -131,15 +130,15 @@
}
static int ad5064_sync_powerdown_mode(struct ad5064_state *st,
- unsigned int channel)
+ const struct iio_chan_spec *chan)
{
unsigned int val;
int ret;
- val = (0x1 << channel);
+ val = (0x1 << chan->address);
- if (st->pwr_down[channel])
- val |= st->pwr_down_mode[channel] << 8;
+ if (st->pwr_down[chan->channel])
+ val |= st->pwr_down_mode[chan->channel] << 8;
ret = ad5064_write(st, AD5064_CMD_POWERDOWN_DAC, 0, val, 0);
@@ -169,7 +168,7 @@
mutex_lock(&indio_dev->mlock);
st->pwr_down_mode[chan->channel] = mode + 1;
- ret = ad5064_sync_powerdown_mode(st, chan->channel);
+ ret = ad5064_sync_powerdown_mode(st, chan);
mutex_unlock(&indio_dev->mlock);
return ret;
@@ -205,7 +204,7 @@
mutex_lock(&indio_dev->mlock);
st->pwr_down[chan->channel] = pwr_down;
- ret = ad5064_sync_powerdown_mode(st, chan->channel);
+ ret = ad5064_sync_powerdown_mode(st, chan);
mutex_unlock(&indio_dev->mlock);
return ret ? ret : len;
}
@@ -258,7 +257,7 @@
switch (mask) {
case IIO_CHAN_INFO_RAW:
- if (val > (1 << chan->scan_type.realbits) || val < 0)
+ if (val >= (1 << chan->scan_type.realbits) || val < 0)
return -EINVAL;
mutex_lock(&indio_dev->mlock);
@@ -292,34 +291,44 @@
{ },
};
-#define AD5064_CHANNEL(chan, bits) { \
+#define AD5064_CHANNEL(chan, addr, bits) { \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.output = 1, \
.channel = (chan), \
.info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
IIO_CHAN_INFO_SCALE_SEPARATE_BIT, \
- .address = AD5064_ADDR_DAC(chan), \
+ .address = addr, \
.scan_type = IIO_ST('u', (bits), 16, 20 - (bits)), \
.ext_info = ad5064_ext_info, \
}
#define DECLARE_AD5064_CHANNELS(name, bits) \
const struct iio_chan_spec name[] = { \
- AD5064_CHANNEL(0, bits), \
- AD5064_CHANNEL(1, bits), \
- AD5064_CHANNEL(2, bits), \
- AD5064_CHANNEL(3, bits), \
- AD5064_CHANNEL(4, bits), \
- AD5064_CHANNEL(5, bits), \
- AD5064_CHANNEL(6, bits), \
- AD5064_CHANNEL(7, bits), \
+ AD5064_CHANNEL(0, 0, bits), \
+ AD5064_CHANNEL(1, 1, bits), \
+ AD5064_CHANNEL(2, 2, bits), \
+ AD5064_CHANNEL(3, 3, bits), \
+ AD5064_CHANNEL(4, 4, bits), \
+ AD5064_CHANNEL(5, 5, bits), \
+ AD5064_CHANNEL(6, 6, bits), \
+ AD5064_CHANNEL(7, 7, bits), \
+}
+
+#define DECLARE_AD5065_CHANNELS(name, bits) \
+const struct iio_chan_spec name[] = { \
+ AD5064_CHANNEL(0, 0, bits), \
+ AD5064_CHANNEL(1, 3, bits), \
}
static DECLARE_AD5064_CHANNELS(ad5024_channels, 12);
static DECLARE_AD5064_CHANNELS(ad5044_channels, 14);
static DECLARE_AD5064_CHANNELS(ad5064_channels, 16);
+static DECLARE_AD5065_CHANNELS(ad5025_channels, 12);
+static DECLARE_AD5065_CHANNELS(ad5045_channels, 14);
+static DECLARE_AD5065_CHANNELS(ad5065_channels, 16);
+
static const struct ad5064_chip_info ad5064_chip_info_tbl[] = {
[ID_AD5024] = {
.shared_vref = false,
@@ -328,7 +337,7 @@
},
[ID_AD5025] = {
.shared_vref = false,
- .channels = ad5024_channels,
+ .channels = ad5025_channels,
.num_channels = 2,
},
[ID_AD5044] = {
@@ -338,7 +347,7 @@
},
[ID_AD5045] = {
.shared_vref = false,
- .channels = ad5044_channels,
+ .channels = ad5045_channels,
.num_channels = 2,
},
[ID_AD5064] = {
@@ -353,7 +362,7 @@
},
[ID_AD5065] = {
.shared_vref = false,
- .channels = ad5064_channels,
+ .channels = ad5065_channels,
.num_channels = 2,
},
[ID_AD5628_1] = {
@@ -429,6 +438,7 @@
{
struct iio_dev *indio_dev;
struct ad5064_state *st;
+ unsigned int midscale;
unsigned int i;
int ret;
@@ -465,11 +475,6 @@
goto error_free_reg;
}
- for (i = 0; i < st->chip_info->num_channels; ++i) {
- st->pwr_down_mode[i] = AD5064_LDAC_PWRDN_1K;
- st->dac_cache[i] = 0x8000;
- }
-
indio_dev->dev.parent = dev;
indio_dev->name = name;
indio_dev->info = &ad5064_info;
@@ -477,6 +482,13 @@
indio_dev->channels = st->chip_info->channels;
indio_dev->num_channels = st->chip_info->num_channels;
+ midscale = (1 << indio_dev->channels[0].scan_type.realbits) / 2;
+
+ for (i = 0; i < st->chip_info->num_channels; ++i) {
+ st->pwr_down_mode[i] = AD5064_LDAC_PWRDN_1K;
+ st->dac_cache[i] = midscale;
+ }
+
ret = iio_device_register(indio_dev);
if (ret)
goto error_disable_reg;
diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
index b5cfa3a..361b232 100644
--- a/drivers/iio/imu/inv_mpu6050/Kconfig
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -5,6 +5,7 @@
config INV_MPU6050_IIO
tristate "Invensense MPU6050 devices"
depends on I2C && SYSFS
+ select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
This driver supports the Invensense MPU6050 devices.
diff --git a/drivers/infiniband/hw/mlx4/cm.c b/drivers/infiniband/hw/mlx4/cm.c
index e0d79b2..add98d0 100644
--- a/drivers/infiniband/hw/mlx4/cm.c
+++ b/drivers/infiniband/hw/mlx4/cm.c
@@ -362,7 +362,6 @@
INIT_LIST_HEAD(&dev->sriov.cm_list);
dev->sriov.sl_id_map = RB_ROOT;
idr_init(&dev->sriov.pv_id_table);
- idr_pre_get(&dev->sriov.pv_id_table, GFP_KERNEL);
}
/* slave = -1 ==> all slaves */
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index 7cd74e2..9135606 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -158,14 +158,10 @@
#define GET_TIME(x) rdtscl(x)
#define DELTA(x,y) ((y)-(x))
#define TIME_NAME "TSC"
-#elif defined(__alpha__)
+#elif defined(__alpha__) || defined(CONFIG_MN10300) || defined(CONFIG_ARM) || defined(CONFIG_TILE)
#define GET_TIME(x) do { x = get_cycles(); } while (0)
#define DELTA(x,y) ((y)-(x))
-#define TIME_NAME "PCC"
-#elif defined(CONFIG_MN10300) || defined(CONFIG_TILE)
-#define GET_TIME(x) do { x = get_cycles(); } while (0)
-#define DELTA(x, y) ((x) - (y))
-#define TIME_NAME "TSC"
+#define TIME_NAME "get_cycles"
#else
#define FAKE_TIME
static unsigned long analog_faketime = 0;
diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c
index 644d724..a32e0d5 100644
--- a/drivers/irqchip/irq-gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -648,7 +648,7 @@
/* Convert our logical CPU mask into a physical one. */
for_each_cpu(cpu, mask)
- map |= 1 << cpu_logical_map(cpu);
+ map |= gic_cpu_map[cpu];
/*
* Ensure that stores to Normal memory are visible to the
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 671f5b1..c346941 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -858,6 +858,7 @@
config AB8500_CORE
bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
depends on GENERIC_HARDIRQS && ABX500_CORE && MFD_DB8500_PRCMU
+ select POWER_SUPPLY
select MFD_CORE
select IRQ_DOMAIN
help
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index b1f3561..5f341a5 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -594,9 +594,12 @@
static int ab8500_gpadc_runtime_resume(struct device *dev)
{
struct ab8500_gpadc *gpadc = dev_get_drvdata(dev);
+ int ret;
- regulator_enable(gpadc->regu);
- return 0;
+ ret = regulator_enable(gpadc->regu);
+ if (ret)
+ dev_err(dev, "Failed to enable vtvout LDO: %d\n", ret);
+ return ret;
}
static int ab8500_gpadc_runtime_idle(struct device *dev)
@@ -643,7 +646,7 @@
}
/* VTVout LDO used to power up ab8500-GPADC */
- gpadc->regu = regulator_get(&pdev->dev, "vddadc");
+ gpadc->regu = devm_regulator_get(&pdev->dev, "vddadc");
if (IS_ERR(gpadc->regu)) {
ret = PTR_ERR(gpadc->regu);
dev_err(gpadc->dev, "failed to get vtvout LDO\n");
@@ -652,7 +655,11 @@
platform_set_drvdata(pdev, gpadc);
- regulator_enable(gpadc->regu);
+ ret = regulator_enable(gpadc->regu);
+ if (ret) {
+ dev_err(gpadc->dev, "Failed to enable vtvout LDO: %d\n", ret);
+ goto fail_enable;
+ }
pm_runtime_set_autosuspend_delay(gpadc->dev, GPADC_AUDOSUSPEND_DELAY);
pm_runtime_use_autosuspend(gpadc->dev);
@@ -663,6 +670,8 @@
list_add_tail(&gpadc->node, &ab8500_gpadc_list);
dev_dbg(gpadc->dev, "probe success\n");
return 0;
+
+fail_enable:
fail_irq:
free_irq(gpadc->irq, gpadc);
fail:
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 6b5edf6..4febc5c 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -460,15 +460,15 @@
switch (omap->usbhs_rev) {
case OMAP_USBHS_REV1:
- omap_usbhs_rev1_hostconfig(omap, reg);
+ reg = omap_usbhs_rev1_hostconfig(omap, reg);
break;
case OMAP_USBHS_REV2:
- omap_usbhs_rev2_hostconfig(omap, reg);
+ reg = omap_usbhs_rev2_hostconfig(omap, reg);
break;
default: /* newer revisions */
- omap_usbhs_rev2_hostconfig(omap, reg);
+ reg = omap_usbhs_rev2_hostconfig(omap, reg);
break;
}
diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c
index bbdbc50..73bf76d 100644
--- a/drivers/mfd/palmas.c
+++ b/drivers/mfd/palmas.c
@@ -257,9 +257,24 @@
PALMAS_INT1_MASK),
};
-static void palmas_dt_to_pdata(struct device_node *node,
+static int palmas_set_pdata_irq_flag(struct i2c_client *i2c,
struct palmas_platform_data *pdata)
{
+ struct irq_data *irq_data = irq_get_irq_data(i2c->irq);
+ if (!irq_data) {
+ dev_err(&i2c->dev, "Invalid IRQ: %d\n", i2c->irq);
+ return -EINVAL;
+ }
+
+ pdata->irq_flags = irqd_get_trigger_type(irq_data);
+ dev_info(&i2c->dev, "Irq flag is 0x%08x\n", pdata->irq_flags);
+ return 0;
+}
+
+static void palmas_dt_to_pdata(struct i2c_client *i2c,
+ struct palmas_platform_data *pdata)
+{
+ struct device_node *node = i2c->dev.of_node;
int ret;
u32 prop;
@@ -283,6 +298,8 @@
pdata->power_ctrl = PALMAS_POWER_CTRL_NSLEEP_MASK |
PALMAS_POWER_CTRL_ENABLE1_MASK |
PALMAS_POWER_CTRL_ENABLE2_MASK;
+ if (i2c->irq)
+ palmas_set_pdata_irq_flag(i2c, pdata);
}
static int palmas_i2c_probe(struct i2c_client *i2c,
@@ -304,7 +321,7 @@
if (!pdata)
return -ENOMEM;
- palmas_dt_to_pdata(node, pdata);
+ palmas_dt_to_pdata(i2c, pdata);
}
if (!pdata)
@@ -344,6 +361,19 @@
}
}
+ /* Change interrupt line output polarity */
+ if (pdata->irq_flags & IRQ_TYPE_LEVEL_HIGH)
+ reg = PALMAS_POLARITY_CTRL_INT_POLARITY;
+ else
+ reg = 0;
+ ret = palmas_update_bits(palmas, PALMAS_PU_PD_OD_BASE,
+ PALMAS_POLARITY_CTRL, PALMAS_POLARITY_CTRL_INT_POLARITY,
+ reg);
+ if (ret < 0) {
+ dev_err(palmas->dev, "POLARITY_CTRL updat failed: %d\n", ret);
+ goto err;
+ }
+
/* Change IRQ into clear on read mode for efficiency */
slave = PALMAS_BASE_TO_SLAVE(PALMAS_INTERRUPT_BASE);
addr = PALMAS_BASE_TO_REG(PALMAS_INTERRUPT_BASE, PALMAS_INT_CTRL);
@@ -352,7 +382,7 @@
regmap_write(palmas->regmap[slave], addr, reg);
ret = regmap_add_irq_chip(palmas->regmap[slave], palmas->irq,
- IRQF_ONESHOT | IRQF_TRIGGER_LOW, 0, &palmas_irq_chip,
+ IRQF_ONESHOT | pdata->irq_flags, 0, &palmas_irq_chip,
&palmas->irq_data);
if (ret < 0)
goto err;
diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c
index 4658b5b..aeb8e40 100644
--- a/drivers/mfd/tps65912-core.c
+++ b/drivers/mfd/tps65912-core.c
@@ -169,6 +169,7 @@
void tps65912_device_exit(struct tps65912 *tps65912)
{
mfd_remove_devices(tps65912->dev);
+ tps65912_irq_exit(tps65912);
kfree(tps65912);
}
diff --git a/drivers/mfd/twl4030-audio.c b/drivers/mfd/twl4030-audio.c
index e16edca..d2ab222 100644
--- a/drivers/mfd/twl4030-audio.c
+++ b/drivers/mfd/twl4030-audio.c
@@ -118,7 +118,7 @@
* Disable the resource.
* The function returns with error or the content of the register
*/
-int twl4030_audio_disable_resource(unsigned id)
+int twl4030_audio_disable_resource(enum twl4030_audio_res id)
{
struct twl4030_audio *audio = platform_get_drvdata(twl4030_audio_dev);
int val;
diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
index 88ff9dc..942b666 100644
--- a/drivers/mfd/twl4030-madc.c
+++ b/drivers/mfd/twl4030-madc.c
@@ -800,7 +800,7 @@
static struct platform_driver twl4030_madc_driver = {
.probe = twl4030_madc_probe,
- .remove = __exit_p(twl4030_madc_remove),
+ .remove = twl4030_madc_remove,
.driver = {
.name = "twl4030_madc",
.owner = THIS_MODULE,
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index 63feb75..9279a91 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -19,6 +19,12 @@
/* 10 parts were found on sflash on Netgear WNDR4500 */
#define BCM47XXPART_MAX_PARTS 12
+/*
+ * Amount of bytes we read when analyzing each block of flash memory.
+ * Set it big enough to allow detecting partition and reading important data.
+ */
+#define BCM47XXPART_BYTES_TO_READ 0x404
+
/* Magics */
#define BOARD_DATA_MAGIC 0x5246504D /* MPFR */
#define POT_MAGIC1 0x54544f50 /* POTT */
@@ -57,17 +63,15 @@
struct trx_header *trx;
int trx_part = -1;
int last_trx_part = -1;
- int max_bytes_to_read = 0x8004;
+ int possible_nvram_sizes[] = { 0x8000, 0xF000, 0x10000, };
if (blocksize <= 0x10000)
blocksize = 0x10000;
- if (blocksize == 0x20000)
- max_bytes_to_read = 0x18004;
/* Alloc */
parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS,
GFP_KERNEL);
- buf = kzalloc(max_bytes_to_read, GFP_KERNEL);
+ buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL);
/* Parse block by block looking for magics */
for (offset = 0; offset <= master->size - blocksize;
@@ -82,7 +86,7 @@
}
/* Read beginning of the block */
- if (mtd_read(master, offset, max_bytes_to_read,
+ if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ,
&bytes_read, (uint8_t *)buf) < 0) {
pr_err("mtd_read error while parsing (offset: 0x%X)!\n",
offset);
@@ -96,20 +100,6 @@
continue;
}
- /* Standard NVRAM */
- if (buf[0x000 / 4] == NVRAM_HEADER ||
- buf[0x1000 / 4] == NVRAM_HEADER ||
- buf[0x8000 / 4] == NVRAM_HEADER ||
- (blocksize == 0x20000 && (
- buf[0x10000 / 4] == NVRAM_HEADER ||
- buf[0x11000 / 4] == NVRAM_HEADER ||
- buf[0x18000 / 4] == NVRAM_HEADER))) {
- bcm47xxpart_add_part(&parts[curr_part++], "nvram",
- offset, 0);
- offset = rounddown(offset, blocksize);
- continue;
- }
-
/*
* board_data starts with board_id which differs across boards,
* but we can use 'MPFR' (hopefully) magic at 0x100
@@ -178,6 +168,30 @@
continue;
}
}
+
+ /* Look for NVRAM at the end of the last block. */
+ for (i = 0; i < ARRAY_SIZE(possible_nvram_sizes); i++) {
+ if (curr_part > BCM47XXPART_MAX_PARTS) {
+ pr_warn("Reached maximum number of partitions, scanning stopped!\n");
+ break;
+ }
+
+ offset = master->size - possible_nvram_sizes[i];
+ if (mtd_read(master, offset, 0x4, &bytes_read,
+ (uint8_t *)buf) < 0) {
+ pr_err("mtd_read error while reading at offset 0x%X!\n",
+ offset);
+ continue;
+ }
+
+ /* Standard NVRAM */
+ if (buf[0] == NVRAM_HEADER) {
+ bcm47xxpart_add_part(&parts[curr_part++], "nvram",
+ master->size - blocksize, 0);
+ break;
+ }
+ }
+
kfree(buf);
/*
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 4321415..42c6392 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1523,6 +1523,14 @@
oobreadlen -= toread;
}
}
+
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
} else {
memcpy(buf, chip->buffers->databuf + col, bytes);
buf += bytes;
@@ -1787,6 +1795,14 @@
len = min(len, readlen);
buf = nand_transfer_oob(chip, buf, ops, len);
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
+
readlen -= len;
if (!readlen)
break;
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
index e3aa274..9c61238 100644
--- a/drivers/mtd/nand/nand_ids.c
+++ b/drivers/mtd/nand/nand_ids.c
@@ -22,49 +22,51 @@
* 512 512 Byte page size
*/
struct nand_flash_dev nand_flash_ids[] = {
+#define SP_OPTIONS NAND_NEED_READRDY
+#define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16)
#ifdef CONFIG_MTD_NAND_MUSEUM_IDS
- {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, 0},
- {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, 0},
- {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, 0},
- {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, 0},
- {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, 0},
- {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, 0},
+ {"NAND 1MiB 5V 8-bit", 0x6e, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 2MiB 5V 8-bit", 0x64, 256, 2, 0x1000, SP_OPTIONS},
+ {"NAND 4MiB 5V 8-bit", 0x6b, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 1MiB 3,3V 8-bit", 0xe8, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 1MiB 3,3V 8-bit", 0xec, 256, 1, 0x1000, SP_OPTIONS},
+ {"NAND 2MiB 3,3V 8-bit", 0xea, 256, 2, 0x1000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xd5, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xe3, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 4MiB 3,3V 8-bit", 0xe5, 512, 4, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 3,3V 8-bit", 0xd6, 512, 8, 0x2000, SP_OPTIONS},
- {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, 0},
- {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, 0},
- {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, NAND_BUSWIDTH_16},
- {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, NAND_BUSWIDTH_16},
+ {"NAND 8MiB 1,8V 8-bit", 0x39, 512, 8, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 3,3V 8-bit", 0xe6, 512, 8, 0x2000, SP_OPTIONS},
+ {"NAND 8MiB 1,8V 16-bit", 0x49, 512, 8, 0x2000, SP_OPTIONS16},
+ {"NAND 8MiB 3,3V 16-bit", 0x59, 512, 8, 0x2000, SP_OPTIONS16},
#endif
- {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, 0},
- {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, 0},
- {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 16MiB 1,8V 8-bit", 0x33, 512, 16, 0x4000, SP_OPTIONS},
+ {"NAND 16MiB 3,3V 8-bit", 0x73, 512, 16, 0x4000, SP_OPTIONS},
+ {"NAND 16MiB 1,8V 16-bit", 0x43, 512, 16, 0x4000, SP_OPTIONS16},
+ {"NAND 16MiB 3,3V 16-bit", 0x53, 512, 16, 0x4000, SP_OPTIONS16},
- {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, 0},
- {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, 0},
- {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 32MiB 1,8V 8-bit", 0x35, 512, 32, 0x4000, SP_OPTIONS},
+ {"NAND 32MiB 3,3V 8-bit", 0x75, 512, 32, 0x4000, SP_OPTIONS},
+ {"NAND 32MiB 1,8V 16-bit", 0x45, 512, 32, 0x4000, SP_OPTIONS16},
+ {"NAND 32MiB 3,3V 16-bit", 0x55, 512, 32, 0x4000, SP_OPTIONS16},
- {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, 0},
- {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, 0},
- {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 64MiB 1,8V 8-bit", 0x36, 512, 64, 0x4000, SP_OPTIONS},
+ {"NAND 64MiB 3,3V 8-bit", 0x76, 512, 64, 0x4000, SP_OPTIONS},
+ {"NAND 64MiB 1,8V 16-bit", 0x46, 512, 64, 0x4000, SP_OPTIONS16},
+ {"NAND 64MiB 3,3V 16-bit", 0x56, 512, 64, 0x4000, SP_OPTIONS16},
- {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, 0},
- {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, 0},
- {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, NAND_BUSWIDTH_16},
- {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, NAND_BUSWIDTH_16},
+ {"NAND 128MiB 1,8V 8-bit", 0x78, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 1,8V 8-bit", 0x39, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 3,3V 8-bit", 0x79, 512, 128, 0x4000, SP_OPTIONS},
+ {"NAND 128MiB 1,8V 16-bit", 0x72, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 1,8V 16-bit", 0x49, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0x74, 512, 128, 0x4000, SP_OPTIONS16},
+ {"NAND 128MiB 3,3V 16-bit", 0x59, 512, 128, 0x4000, SP_OPTIONS16},
- {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, 0},
+ {"NAND 256MiB 3,3V 8-bit", 0x71, 512, 256, 0x4000, SP_OPTIONS},
/*
* These are the new chips with large page size. The pagesize and the
diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c
index 75933a6..efb7f10 100644
--- a/drivers/pinctrl/pinctrl-at91.c
+++ b/drivers/pinctrl/pinctrl-at91.c
@@ -1277,21 +1277,80 @@
}
#ifdef CONFIG_PM
+
+static u32 wakeups[MAX_GPIO_BANKS];
+static u32 backups[MAX_GPIO_BANKS];
+
static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
{
struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
unsigned bank = at91_gpio->pioc_idx;
+ unsigned mask = 1 << d->hwirq;
if (unlikely(bank >= MAX_GPIO_BANKS))
return -EINVAL;
+ if (state)
+ wakeups[bank] |= mask;
+ else
+ wakeups[bank] &= ~mask;
+
irq_set_irq_wake(at91_gpio->pioc_virq, state);
return 0;
}
+
+void at91_pinctrl_gpio_suspend(void)
+{
+ int i;
+
+ for (i = 0; i < gpio_banks; i++) {
+ void __iomem *pio;
+
+ if (!gpio_chips[i])
+ continue;
+
+ pio = gpio_chips[i]->regbase;
+
+ backups[i] = __raw_readl(pio + PIO_IMR);
+ __raw_writel(backups[i], pio + PIO_IDR);
+ __raw_writel(wakeups[i], pio + PIO_IER);
+
+ if (!wakeups[i]) {
+ clk_unprepare(gpio_chips[i]->clock);
+ clk_disable(gpio_chips[i]->clock);
+ } else {
+ printk(KERN_DEBUG "GPIO-%c may wake for %08x\n",
+ 'A'+i, wakeups[i]);
+ }
+ }
+}
+
+void at91_pinctrl_gpio_resume(void)
+{
+ int i;
+
+ for (i = 0; i < gpio_banks; i++) {
+ void __iomem *pio;
+
+ if (!gpio_chips[i])
+ continue;
+
+ pio = gpio_chips[i]->regbase;
+
+ if (!wakeups[i]) {
+ if (clk_prepare(gpio_chips[i]->clock) == 0)
+ clk_enable(gpio_chips[i]->clock);
+ }
+
+ __raw_writel(wakeups[i], pio + PIO_IDR);
+ __raw_writel(backups[i], pio + PIO_IER);
+ }
+}
+
#else
#define gpio_irq_set_wake NULL
-#endif
+#endif /* CONFIG_PM */
static struct irq_chip gpio_irqchip = {
.name = "GPIO",
diff --git a/drivers/rtc/rtc-mv.c b/drivers/rtc/rtc-mv.c
index 57233c8..8f87fec 100644
--- a/drivers/rtc/rtc-mv.c
+++ b/drivers/rtc/rtc-mv.c
@@ -14,6 +14,7 @@
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/delay.h>
+#include <linux/clk.h>
#include <linux/gfp.h>
#include <linux/module.h>
@@ -41,6 +42,7 @@
struct rtc_device *rtc;
void __iomem *ioaddr;
int irq;
+ struct clk *clk;
};
static int mv_rtc_set_time(struct device *dev, struct rtc_time *tm)
@@ -221,6 +223,7 @@
struct rtc_plat_data *pdata;
resource_size_t size;
u32 rtc_time;
+ int ret = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
@@ -239,11 +242,17 @@
if (!pdata->ioaddr)
return -ENOMEM;
+ pdata->clk = devm_clk_get(&pdev->dev, NULL);
+ /* Not all SoCs require a clock.*/
+ if (!IS_ERR(pdata->clk))
+ clk_prepare_enable(pdata->clk);
+
/* make sure the 24 hours mode is enabled */
rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
if (rtc_time & RTC_HOURS_12H_MODE) {
dev_err(&pdev->dev, "24 Hours mode not supported.\n");
- return -EINVAL;
+ ret = -EINVAL;
+ goto out;
}
/* make sure it is actually functional */
@@ -252,7 +261,8 @@
rtc_time = readl(pdata->ioaddr + RTC_TIME_REG_OFFS);
if (rtc_time == 0x01000000) {
dev_err(&pdev->dev, "internal RTC not ticking\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto out;
}
}
@@ -268,8 +278,10 @@
} else
pdata->rtc = rtc_device_register(pdev->name, &pdev->dev,
&mv_rtc_ops, THIS_MODULE);
- if (IS_ERR(pdata->rtc))
- return PTR_ERR(pdata->rtc);
+ if (IS_ERR(pdata->rtc)) {
+ ret = PTR_ERR(pdata->rtc);
+ goto out;
+ }
if (pdata->irq >= 0) {
writel(0, pdata->ioaddr + RTC_ALARM_INTERRUPT_MASK_REG_OFFS);
@@ -282,6 +294,11 @@
}
return 0;
+out:
+ if (!IS_ERR(pdata->clk))
+ clk_disable_unprepare(pdata->clk);
+
+ return ret;
}
static int __exit mv_rtc_remove(struct platform_device *pdev)
@@ -292,6 +309,9 @@
device_init_wakeup(&pdev->dev, 0);
rtc_device_unregister(pdata->rtc);
+ if (!IS_ERR(pdata->clk))
+ clk_disable_unprepare(pdata->clk);
+
return 0;
}
diff --git a/drivers/s390/block/scm_blk.c b/drivers/s390/block/scm_blk.c
index 9978ad4..5ac9c93 100644
--- a/drivers/s390/block/scm_blk.c
+++ b/drivers/s390/block/scm_blk.c
@@ -135,6 +135,11 @@
.release = scm_release,
};
+static bool scm_permit_request(struct scm_blk_dev *bdev, struct request *req)
+{
+ return rq_data_dir(req) != WRITE || bdev->state != SCM_WR_PROHIBIT;
+}
+
static void scm_request_prepare(struct scm_request *scmrq)
{
struct scm_blk_dev *bdev = scmrq->bdev;
@@ -195,14 +200,18 @@
scm_release_cluster(scmrq);
blk_requeue_request(bdev->rq, scmrq->request);
+ atomic_dec(&bdev->queued_reqs);
scm_request_done(scmrq);
scm_ensure_queue_restart(bdev);
}
void scm_request_finish(struct scm_request *scmrq)
{
+ struct scm_blk_dev *bdev = scmrq->bdev;
+
scm_release_cluster(scmrq);
blk_end_request_all(scmrq->request, scmrq->error);
+ atomic_dec(&bdev->queued_reqs);
scm_request_done(scmrq);
}
@@ -218,6 +227,10 @@
if (req->cmd_type != REQ_TYPE_FS)
continue;
+ if (!scm_permit_request(bdev, req)) {
+ scm_ensure_queue_restart(bdev);
+ return;
+ }
scmrq = scm_request_fetch();
if (!scmrq) {
SCM_LOG(5, "no request");
@@ -231,11 +244,13 @@
return;
}
if (scm_need_cluster_request(scmrq)) {
+ atomic_inc(&bdev->queued_reqs);
blk_start_request(req);
scm_initiate_cluster_request(scmrq);
return;
}
scm_request_prepare(scmrq);
+ atomic_inc(&bdev->queued_reqs);
blk_start_request(req);
ret = scm_start_aob(scmrq->aob);
@@ -244,7 +259,6 @@
scm_request_requeue(scmrq);
return;
}
- atomic_inc(&bdev->queued_reqs);
}
}
@@ -280,6 +294,38 @@
tasklet_hi_schedule(&bdev->tasklet);
}
+static void scm_blk_handle_error(struct scm_request *scmrq)
+{
+ struct scm_blk_dev *bdev = scmrq->bdev;
+ unsigned long flags;
+
+ if (scmrq->error != -EIO)
+ goto restart;
+
+ /* For -EIO the response block is valid. */
+ switch (scmrq->aob->response.eqc) {
+ case EQC_WR_PROHIBIT:
+ spin_lock_irqsave(&bdev->lock, flags);
+ if (bdev->state != SCM_WR_PROHIBIT)
+ pr_info("%lu: Write access to the SCM increment is suspended\n",
+ (unsigned long) bdev->scmdev->address);
+ bdev->state = SCM_WR_PROHIBIT;
+ spin_unlock_irqrestore(&bdev->lock, flags);
+ goto requeue;
+ default:
+ break;
+ }
+
+restart:
+ if (!scm_start_aob(scmrq->aob))
+ return;
+
+requeue:
+ spin_lock_irqsave(&bdev->rq_lock, flags);
+ scm_request_requeue(scmrq);
+ spin_unlock_irqrestore(&bdev->rq_lock, flags);
+}
+
static void scm_blk_tasklet(struct scm_blk_dev *bdev)
{
struct scm_request *scmrq;
@@ -293,11 +339,8 @@
spin_unlock_irqrestore(&bdev->lock, flags);
if (scmrq->error && scmrq->retries-- > 0) {
- if (scm_start_aob(scmrq->aob)) {
- spin_lock_irqsave(&bdev->rq_lock, flags);
- scm_request_requeue(scmrq);
- spin_unlock_irqrestore(&bdev->rq_lock, flags);
- }
+ scm_blk_handle_error(scmrq);
+
/* Request restarted or requeued, handle next. */
spin_lock_irqsave(&bdev->lock, flags);
continue;
@@ -310,7 +353,6 @@
}
scm_request_finish(scmrq);
- atomic_dec(&bdev->queued_reqs);
spin_lock_irqsave(&bdev->lock, flags);
}
spin_unlock_irqrestore(&bdev->lock, flags);
@@ -332,6 +374,7 @@
}
bdev->scmdev = scmdev;
+ bdev->state = SCM_OPER;
spin_lock_init(&bdev->rq_lock);
spin_lock_init(&bdev->lock);
INIT_LIST_HEAD(&bdev->finished_requests);
@@ -396,6 +439,18 @@
put_disk(bdev->gendisk);
}
+void scm_blk_set_available(struct scm_blk_dev *bdev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&bdev->lock, flags);
+ if (bdev->state == SCM_WR_PROHIBIT)
+ pr_info("%lu: Write access to the SCM increment is restored\n",
+ (unsigned long) bdev->scmdev->address);
+ bdev->state = SCM_OPER;
+ spin_unlock_irqrestore(&bdev->lock, flags);
+}
+
static int __init scm_blk_init(void)
{
int ret = -EINVAL;
diff --git a/drivers/s390/block/scm_blk.h b/drivers/s390/block/scm_blk.h
index 3c1ccf4..8b387b3 100644
--- a/drivers/s390/block/scm_blk.h
+++ b/drivers/s390/block/scm_blk.h
@@ -21,6 +21,7 @@
spinlock_t rq_lock; /* guard the request queue */
spinlock_t lock; /* guard the rest of the blockdev */
atomic_t queued_reqs;
+ enum {SCM_OPER, SCM_WR_PROHIBIT} state;
struct list_head finished_requests;
#ifdef CONFIG_SCM_BLOCK_CLUSTER_WRITE
struct list_head cluster_list;
@@ -48,6 +49,7 @@
int scm_blk_dev_setup(struct scm_blk_dev *, struct scm_device *);
void scm_blk_dev_cleanup(struct scm_blk_dev *);
+void scm_blk_set_available(struct scm_blk_dev *);
void scm_blk_irq(struct scm_device *, void *, int);
void scm_request_finish(struct scm_request *);
diff --git a/drivers/s390/block/scm_drv.c b/drivers/s390/block/scm_drv.c
index 9fa0a90..5f6180d 100644
--- a/drivers/s390/block/scm_drv.c
+++ b/drivers/s390/block/scm_drv.c
@@ -13,12 +13,23 @@
#include <asm/eadm.h>
#include "scm_blk.h"
-static void notify(struct scm_device *scmdev)
+static void scm_notify(struct scm_device *scmdev, enum scm_event event)
{
- pr_info("%lu: The capabilities of the SCM increment changed\n",
- (unsigned long) scmdev->address);
- SCM_LOG(2, "State changed");
- SCM_LOG_STATE(2, scmdev);
+ struct scm_blk_dev *bdev = dev_get_drvdata(&scmdev->dev);
+
+ switch (event) {
+ case SCM_CHANGE:
+ pr_info("%lu: The capabilities of the SCM increment changed\n",
+ (unsigned long) scmdev->address);
+ SCM_LOG(2, "State changed");
+ SCM_LOG_STATE(2, scmdev);
+ break;
+ case SCM_AVAIL:
+ SCM_LOG(2, "Increment available");
+ SCM_LOG_STATE(2, scmdev);
+ scm_blk_set_available(bdev);
+ break;
+ }
}
static int scm_probe(struct scm_device *scmdev)
@@ -64,7 +75,7 @@
.name = "scm_block",
.owner = THIS_MODULE,
},
- .notify = notify,
+ .notify = scm_notify,
.probe = scm_probe,
.remove = scm_remove,
.handler = scm_blk_irq,
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 30a2255..cd79838 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -627,6 +627,8 @@
struct read_storage_sccb *sccb;
int i, id, assigned, rc;
+ if (OLDMEM_BASE) /* No standby memory in kdump mode */
+ return 0;
if (!early_read_info_sccb_valid)
return 0;
if ((sclp_facilities & 0xe00000000000ULL) != 0xe00000000000ULL)
diff --git a/drivers/s390/cio/chsc.c b/drivers/s390/cio/chsc.c
index 31ceef1..e16c553 100644
--- a/drivers/s390/cio/chsc.c
+++ b/drivers/s390/cio/chsc.c
@@ -433,6 +433,20 @@
" failed (rc=%d).\n", ret);
}
+static void chsc_process_sei_scm_avail(struct chsc_sei_nt0_area *sei_area)
+{
+ int ret;
+
+ CIO_CRW_EVENT(4, "chsc: scm available information\n");
+ if (sei_area->rs != 7)
+ return;
+
+ ret = scm_process_availability_information();
+ if (ret)
+ CIO_CRW_EVENT(0, "chsc: process availability information"
+ " failed (rc=%d).\n", ret);
+}
+
static void chsc_process_sei_nt2(struct chsc_sei_nt2_area *sei_area)
{
switch (sei_area->cc) {
@@ -468,6 +482,9 @@
case 12: /* scm change notification */
chsc_process_sei_scm_change(sei_area);
break;
+ case 14: /* scm available notification */
+ chsc_process_sei_scm_avail(sei_area);
+ break;
default: /* other stuff */
CIO_CRW_EVENT(2, "chsc: sei nt0 unhandled cc=%d\n",
sei_area->cc);
diff --git a/drivers/s390/cio/chsc.h b/drivers/s390/cio/chsc.h
index 227e05f..349d5fc 100644
--- a/drivers/s390/cio/chsc.h
+++ b/drivers/s390/cio/chsc.h
@@ -156,8 +156,10 @@
#ifdef CONFIG_SCM_BUS
int scm_update_information(void);
+int scm_process_availability_information(void);
#else /* CONFIG_SCM_BUS */
static inline int scm_update_information(void) { return 0; }
+static inline int scm_process_availability_information(void) { return 0; }
#endif /* CONFIG_SCM_BUS */
diff --git a/drivers/s390/cio/scm.c b/drivers/s390/cio/scm.c
index bcf20f3..46ec256 100644
--- a/drivers/s390/cio/scm.c
+++ b/drivers/s390/cio/scm.c
@@ -211,7 +211,7 @@
goto out;
scmdrv = to_scm_drv(scmdev->dev.driver);
if (changed && scmdrv->notify)
- scmdrv->notify(scmdev);
+ scmdrv->notify(scmdev, SCM_CHANGE);
out:
device_unlock(&scmdev->dev);
if (changed)
@@ -297,6 +297,22 @@
return ret;
}
+static int scm_dev_avail(struct device *dev, void *unused)
+{
+ struct scm_driver *scmdrv = to_scm_drv(dev->driver);
+ struct scm_device *scmdev = to_scm_dev(dev);
+
+ if (dev->driver && scmdrv->notify)
+ scmdrv->notify(scmdev, SCM_AVAIL);
+
+ return 0;
+}
+
+int scm_process_availability_information(void)
+{
+ return bus_for_each_dev(&scm_bus_type, NULL, NULL, scm_dev_avail);
+}
+
static int __init scm_init(void)
{
int ret;
diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
index 192cf08..57b4519 100644
--- a/drivers/staging/comedi/drivers/dt9812.c
+++ b/drivers/staging/comedi/drivers/dt9812.c
@@ -947,12 +947,13 @@
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
u8 bits = 0;
dt9812_digital_in(devpriv->slot, &bits);
for (n = 0; n < insn->n; n++)
- data[n] = ((1 << insn->chanspec) & bits) != 0;
+ data[n] = ((1 << channel) & bits) != 0;
return n;
}
@@ -961,12 +962,13 @@
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
u8 bits = 0;
dt9812_digital_out_shadow(devpriv->slot, &bits);
for (n = 0; n < insn->n; n++) {
- u8 mask = 1 << insn->chanspec;
+ u8 mask = 1 << channel;
bits &= ~mask;
if (data[n])
@@ -981,13 +983,13 @@
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
for (n = 0; n < insn->n; n++) {
u16 value = 0;
- dt9812_analog_in(devpriv->slot, insn->chanspec, &value,
- DT9812_GAIN_1);
+ dt9812_analog_in(devpriv->slot, channel, &value, DT9812_GAIN_1);
data[n] = value;
}
return n;
@@ -998,12 +1000,13 @@
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
u16 value;
for (n = 0; n < insn->n; n++) {
value = 0;
- dt9812_analog_out_shadow(devpriv->slot, insn->chanspec, &value);
+ dt9812_analog_out_shadow(devpriv->slot, channel, &value);
data[n] = value;
}
return n;
@@ -1014,10 +1017,11 @@
unsigned int *data)
{
struct comedi_dt9812 *devpriv = dev->private;
+ unsigned int channel = CR_CHAN(insn->chanspec);
int n;
for (n = 0; n < insn->n; n++)
- dt9812_analog_out(devpriv->slot, insn->chanspec, data[n]);
+ dt9812_analog_out(devpriv->slot, channel, data[n]);
return n;
}
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index 1a0062a..6aac1f6 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -730,10 +730,14 @@
static int usbduxsub_start(struct usbduxsub *usbduxsub)
{
int errcode = 0;
- uint8_t local_transfer_buffer[16];
+ uint8_t *local_transfer_buffer;
+
+ local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to zero */
- local_transfer_buffer[0] = 0;
+ *local_transfer_buffer = 0;
errcode = usb_control_msg(usbduxsub->usbdev,
/* create a pipe for a control transfer */
usb_sndctrlpipe(usbduxsub->usbdev, 0),
@@ -751,22 +755,25 @@
1,
/* Timeout */
BULK_TIMEOUT);
- if (errcode < 0) {
+ if (errcode < 0)
dev_err(&usbduxsub->interface->dev,
"comedi_: control msg failed (start)\n");
- return errcode;
- }
- return 0;
+
+ kfree(local_transfer_buffer);
+ return errcode;
}
static int usbduxsub_stop(struct usbduxsub *usbduxsub)
{
int errcode = 0;
+ uint8_t *local_transfer_buffer;
- uint8_t local_transfer_buffer[16];
+ local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to one */
- local_transfer_buffer[0] = 1;
+ *local_transfer_buffer = 1;
errcode = usb_control_msg(usbduxsub->usbdev,
usb_sndctrlpipe(usbduxsub->usbdev, 0),
/* bRequest, "Firmware" */
@@ -781,12 +788,12 @@
1,
/* Timeout */
BULK_TIMEOUT);
- if (errcode < 0) {
+ if (errcode < 0)
dev_err(&usbduxsub->interface->dev,
"comedi_: control msg failed (stop)\n");
- return errcode;
- }
- return 0;
+
+ kfree(local_transfer_buffer);
+ return errcode;
}
static int usbduxsub_upload(struct usbduxsub *usbduxsub,
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index 4bf5dd0..1ba0e3d 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -436,10 +436,14 @@
static int usbduxfastsub_start(struct usbduxfastsub_s *udfs)
{
int ret;
- unsigned char local_transfer_buffer[16];
+ unsigned char *local_transfer_buffer;
+
+ local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to zero */
- local_transfer_buffer[0] = 0;
+ *local_transfer_buffer = 0;
/* bRequest, "Firmware" */
ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
USBDUXFASTSUB_FIRMWARE,
@@ -450,22 +454,25 @@
local_transfer_buffer,
1, /* Length */
EZTIMEOUT); /* Timeout */
- if (ret < 0) {
+ if (ret < 0)
dev_err(&udfs->interface->dev,
"control msg failed (start)\n");
- return ret;
- }
- return 0;
+ kfree(local_transfer_buffer);
+ return ret;
}
static int usbduxfastsub_stop(struct usbduxfastsub_s *udfs)
{
int ret;
- unsigned char local_transfer_buffer[16];
+ unsigned char *local_transfer_buffer;
+
+ local_transfer_buffer = kmalloc(1, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to one */
- local_transfer_buffer[0] = 1;
+ *local_transfer_buffer = 1;
/* bRequest, "Firmware" */
ret = usb_control_msg(udfs->usbdev, usb_sndctrlpipe(udfs->usbdev, 0),
USBDUXFASTSUB_FIRMWARE,
@@ -474,13 +481,12 @@
0x0000, /* Index */
local_transfer_buffer, 1, /* Length */
EZTIMEOUT); /* Timeout */
- if (ret < 0) {
+ if (ret < 0)
dev_err(&udfs->interface->dev,
"control msg failed (stop)\n");
- return ret;
- }
- return 0;
+ kfree(local_transfer_buffer);
+ return ret;
}
static int usbduxfastsub_upload(struct usbduxfastsub_s *udfs,
diff --git a/drivers/staging/comedi/drivers/usbduxsigma.c b/drivers/staging/comedi/drivers/usbduxsigma.c
index d066351..a728c8f 100644
--- a/drivers/staging/comedi/drivers/usbduxsigma.c
+++ b/drivers/staging/comedi/drivers/usbduxsigma.c
@@ -681,7 +681,11 @@
static int usbduxsub_start(struct usbduxsub *usbduxsub)
{
int errcode = 0;
- uint8_t local_transfer_buffer[16];
+ uint8_t *local_transfer_buffer;
+
+ local_transfer_buffer = kmalloc(16, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to zero */
local_transfer_buffer[0] = 0;
@@ -702,19 +706,22 @@
1,
/* Timeout */
BULK_TIMEOUT);
- if (errcode < 0) {
+ if (errcode < 0)
dev_err(&usbduxsub->interface->dev,
"comedi_: control msg failed (start)\n");
- return errcode;
- }
- return 0;
+
+ kfree(local_transfer_buffer);
+ return errcode;
}
static int usbduxsub_stop(struct usbduxsub *usbduxsub)
{
int errcode = 0;
+ uint8_t *local_transfer_buffer;
- uint8_t local_transfer_buffer[16];
+ local_transfer_buffer = kmalloc(16, GFP_KERNEL);
+ if (!local_transfer_buffer)
+ return -ENOMEM;
/* 7f92 to one */
local_transfer_buffer[0] = 1;
@@ -732,12 +739,12 @@
1,
/* Timeout */
BULK_TIMEOUT);
- if (errcode < 0) {
+ if (errcode < 0)
dev_err(&usbduxsub->interface->dev,
"comedi_: control msg failed (stop)\n");
- return errcode;
- }
- return 0;
+
+ kfree(local_transfer_buffer);
+ return errcode;
}
static int usbduxsub_upload(struct usbduxsub *usbduxsub,
diff --git a/drivers/staging/imx-drm/ipuv3-crtc.c b/drivers/staging/imx-drm/ipuv3-crtc.c
index 4b3a019..b028b0d 100644
--- a/drivers/staging/imx-drm/ipuv3-crtc.c
+++ b/drivers/staging/imx-drm/ipuv3-crtc.c
@@ -483,17 +483,6 @@
goto err_out;
}
- ipu_crtc->irq = ipu_idmac_channel_irq(ipu, ipu_crtc->ipu_ch,
- IPU_IRQ_EOF);
- ret = devm_request_irq(ipu_crtc->dev, ipu_crtc->irq, ipu_irq_handler, 0,
- "imx_drm", ipu_crtc);
- if (ret < 0) {
- dev_err(ipu_crtc->dev, "irq request failed with %d.\n", ret);
- goto err_out;
- }
-
- disable_irq(ipu_crtc->irq);
-
return 0;
err_out:
ipu_put_resources(ipu_crtc);
@@ -504,6 +493,7 @@
static int ipu_crtc_init(struct ipu_crtc *ipu_crtc,
struct ipu_client_platformdata *pdata)
{
+ struct ipu_soc *ipu = dev_get_drvdata(ipu_crtc->dev->parent);
int ret;
ret = ipu_get_resources(ipu_crtc, pdata);
@@ -522,6 +512,17 @@
goto err_put_resources;
}
+ ipu_crtc->irq = ipu_idmac_channel_irq(ipu, ipu_crtc->ipu_ch,
+ IPU_IRQ_EOF);
+ ret = devm_request_irq(ipu_crtc->dev, ipu_crtc->irq, ipu_irq_handler, 0,
+ "imx_drm", ipu_crtc);
+ if (ret < 0) {
+ dev_err(ipu_crtc->dev, "irq request failed with %d.\n", ret);
+ goto err_put_resources;
+ }
+
+ disable_irq(ipu_crtc->irq);
+
return 0;
err_put_resources:
diff --git a/drivers/staging/tidspbridge/rmgr/drv.c b/drivers/staging/tidspbridge/rmgr/drv.c
index db1da28..be26917 100644
--- a/drivers/staging/tidspbridge/rmgr/drv.c
+++ b/drivers/staging/tidspbridge/rmgr/drv.c
@@ -76,37 +76,28 @@
struct node_res_object **node_res_obj =
(struct node_res_object **)node_resource;
struct process_context *ctxt = (struct process_context *)process_ctxt;
- int status = 0;
int retval;
*node_res_obj = kzalloc(sizeof(struct node_res_object), GFP_KERNEL);
- if (!*node_res_obj) {
- status = -ENOMEM;
- goto func_end;
- }
+ if (!*node_res_obj)
+ return -ENOMEM;
(*node_res_obj)->node = hnode;
- retval = idr_get_new(ctxt->node_id, *node_res_obj,
- &(*node_res_obj)->id);
- if (retval == -EAGAIN) {
- if (!idr_pre_get(ctxt->node_id, GFP_KERNEL)) {
- pr_err("%s: OUT OF MEMORY\n", __func__);
- status = -ENOMEM;
- goto func_end;
- }
-
- retval = idr_get_new(ctxt->node_id, *node_res_obj,
- &(*node_res_obj)->id);
+ retval = idr_alloc(ctxt->node_id, *node_res_obj, 0, 0, GFP_KERNEL);
+ if (retval >= 0) {
+ (*node_res_obj)->id = retval;
+ return 0;
}
- if (retval) {
+
+ kfree(*node_res_obj);
+
+ if (retval == -ENOSPC) {
pr_err("%s: FAILED, IDR is FULL\n", __func__);
- status = -EFAULT;
+ return -EFAULT;
+ } else {
+ pr_err("%s: OUT OF MEMORY\n", __func__);
+ return -ENOMEM;
}
-func_end:
- if (status)
- kfree(*node_res_obj);
-
- return status;
}
/* Release all Node resources and its context
@@ -201,35 +192,26 @@
struct strm_res_object **pstrm_res =
(struct strm_res_object **)strm_res;
struct process_context *ctxt = (struct process_context *)process_ctxt;
- int status = 0;
int retval;
*pstrm_res = kzalloc(sizeof(struct strm_res_object), GFP_KERNEL);
- if (*pstrm_res == NULL) {
- status = -EFAULT;
- goto func_end;
- }
+ if (*pstrm_res == NULL)
+ return -EFAULT;
(*pstrm_res)->stream = stream_obj;
- retval = idr_get_new(ctxt->stream_id, *pstrm_res,
- &(*pstrm_res)->id);
- if (retval == -EAGAIN) {
- if (!idr_pre_get(ctxt->stream_id, GFP_KERNEL)) {
- pr_err("%s: OUT OF MEMORY\n", __func__);
- status = -ENOMEM;
- goto func_end;
- }
-
- retval = idr_get_new(ctxt->stream_id, *pstrm_res,
- &(*pstrm_res)->id);
+ retval = idr_alloc(ctxt->stream_id, *pstrm_res, 0, 0, GFP_KERNEL);
+ if (retval >= 0) {
+ (*pstrm_res)->id = retval;
+ return 0;
}
- if (retval) {
+
+ if (retval == -ENOSPC) {
pr_err("%s: FAILED, IDR is FULL\n", __func__);
- status = -EPERM;
+ return -EPERM;
+ } else {
+ pr_err("%s: OUT OF MEMORY\n", __func__);
+ return -ENOMEM;
}
-
-func_end:
- return status;
}
static int drv_proc_free_strm_res(int id, void *p, void *process_ctxt)
diff --git a/drivers/staging/vt6656/card.c b/drivers/staging/vt6656/card.c
index 22918a1..d2479b7 100644
--- a/drivers/staging/vt6656/card.c
+++ b/drivers/staging/vt6656/card.c
@@ -790,7 +790,7 @@
if ((~uLowNextTBTT) < uLowRemain)
qwTSF = ((qwTSF >> 32) + 1) << 32;
- qwTSF = (qwTSF & 0xffffffff00000000UL) |
+ qwTSF = (qwTSF & 0xffffffff00000000ULL) |
(u64)(uLowNextTBTT + uLowRemain);
return (qwTSF);
diff --git a/drivers/staging/vt6656/main_usb.c b/drivers/staging/vt6656/main_usb.c
index d5f53e1..a5063a6 100644
--- a/drivers/staging/vt6656/main_usb.c
+++ b/drivers/staging/vt6656/main_usb.c
@@ -669,8 +669,6 @@
if (device->flags & DEVICE_FLAGS_OPENED)
device_close(device->dev);
- usb_put_dev(interface_to_usbdev(intf));
-
return 0;
}
@@ -681,8 +679,6 @@
if (!device || !device->dev)
return -ENODEV;
- usb_get_dev(interface_to_usbdev(intf));
-
if (!(device->flags & DEVICE_FLAGS_OPENED))
device_open(device->dev);
diff --git a/drivers/staging/zcache/ramster/tcp.c b/drivers/staging/zcache/ramster/tcp.c
index aa2a1a7..f6e1e52 100644
--- a/drivers/staging/zcache/ramster/tcp.c
+++ b/drivers/staging/zcache/ramster/tcp.c
@@ -300,27 +300,22 @@
static int r2net_prep_nsw(struct r2net_node *nn, struct r2net_status_wait *nsw)
{
- int ret = 0;
+ int ret;
- do {
- if (!idr_pre_get(&nn->nn_status_idr, GFP_ATOMIC)) {
- ret = -EAGAIN;
- break;
- }
- spin_lock(&nn->nn_lock);
- ret = idr_get_new(&nn->nn_status_idr, nsw, &nsw->ns_id);
- if (ret == 0)
- list_add_tail(&nsw->ns_node_item,
- &nn->nn_status_list);
- spin_unlock(&nn->nn_lock);
- } while (ret == -EAGAIN);
+ spin_lock(&nn->nn_lock);
+ ret = idr_alloc(&nn->nn_status_idr, nsw, 0, 0, GFP_ATOMIC);
+ if (ret >= 0) {
+ nsw->ns_id = ret;
+ list_add_tail(&nsw->ns_node_item, &nn->nn_status_list);
+ }
+ spin_unlock(&nn->nn_lock);
- if (ret == 0) {
+ if (ret >= 0) {
init_waitqueue_head(&nsw->ns_wq);
nsw->ns_sys_status = R2NET_ERR_NONE;
nsw->ns_status = 0;
+ return 0;
}
-
return ret;
}
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 0efc815..cf6a538 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -301,7 +301,28 @@
},
[PORT_8250_CIR] = {
.name = "CIR port"
- }
+ },
+ [PORT_ALTR_16550_F32] = {
+ .name = "Altera 16550 FIFO32",
+ .fifo_size = 32,
+ .tx_loadsz = 32,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_ALTR_16550_F64] = {
+ .name = "Altera 16550 FIFO64",
+ .fifo_size = 64,
+ .tx_loadsz = 64,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
+ [PORT_ALTR_16550_F128] = {
+ .name = "Altera 16550 FIFO128",
+ .fifo_size = 128,
+ .tx_loadsz = 128,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
+ },
};
/* Uart divisor latch read */
@@ -3396,3 +3417,32 @@
MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
#endif
MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);
+
+#ifndef MODULE
+/* This module was renamed to 8250_core in 3.7. Keep the old "8250" name
+ * working as well for the module options so we don't break people. We
+ * need to keep the names identical and the convenient macros will happily
+ * refuse to let us do that by failing the build with redefinition errors
+ * of global variables. So we stick them inside a dummy function to avoid
+ * those conflicts. The options still get parsed, and the redefined
+ * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive.
+ *
+ * This is hacky. I'm sorry.
+ */
+static void __used s8250_options(void)
+{
+#undef MODULE_PARAM_PREFIX
+#define MODULE_PARAM_PREFIX "8250."
+
+ module_param_cb(share_irqs, ¶m_ops_uint, &share_irqs, 0644);
+ module_param_cb(nr_uarts, ¶m_ops_uint, &nr_uarts, 0644);
+ module_param_cb(skip_txen_test, ¶m_ops_uint, &skip_txen_test, 0644);
+#ifdef CONFIG_SERIAL_8250_RSA
+ __module_param_call(MODULE_PARAM_PREFIX, probe_rsa,
+ ¶m_array_ops, .arr = &__param_arr_probe_rsa,
+ 0444, -1);
+#endif
+}
+#else
+MODULE_ALIAS("8250");
+#endif
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 791c5a7..aa76825 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1571,6 +1571,7 @@
/* Unknown vendors/cards - this should not be in linux/pci_ids.h */
#define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584
+#define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588
/*
* Master list of serial port init/setup/exit quirks.
@@ -1852,15 +1853,6 @@
},
{
.vendor = PCI_VENDOR_ID_PLX,
- .device = PCI_DEVICE_ID_PLX_9050,
- .subvendor = PCI_VENDOR_ID_PLX,
- .subdevice = PCI_SUBDEVICE_ID_UNKNOWN_0x1584,
- .init = pci_plx9050_init,
- .setup = pci_default_setup,
- .exit = pci_plx9050_exit,
- },
- {
- .vendor = PCI_VENDOR_ID_PLX,
.device = PCI_DEVICE_ID_PLX_ROMULUS,
.subvendor = PCI_VENDOR_ID_PLX,
.subdevice = PCI_DEVICE_ID_PLX_ROMULUS,
@@ -3733,7 +3725,12 @@
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_VENDOR_ID_PLX,
PCI_SUBDEVICE_ID_UNKNOWN_0x1584, 0, 0,
- pbn_b0_4_115200 },
+ pbn_b2_4_115200 },
+ /* Unknown card - subdevice 0x1588 */
+ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
+ PCI_VENDOR_ID_PLX,
+ PCI_SUBDEVICE_ID_UNKNOWN_0x1588, 0, 0,
+ pbn_b2_8_115200 },
{ PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050,
PCI_SUBVENDOR_ID_KEYSPAN,
PCI_SUBDEVICE_ID_KEYSPAN_SX2, 0, 0,
@@ -4791,6 +4788,10 @@
PCI_VENDOR_ID_IBM, 0x0299,
0, 0, pbn_b0_bt_2_115200 },
+ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835,
+ 0x1000, 0x0012,
+ 0, 0, pbn_b0_bt_2_115200 },
+
{ PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901,
0xA000, 0x1000,
0, 0, pbn_b0_1_115200 },
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index 35d9ab9..b3455a9 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -429,6 +429,7 @@
{
struct uart_8250_port uart;
int ret, line, flags = dev_id->driver_data;
+ struct resource *res = NULL;
if (flags & UNKNOWN_DEV) {
ret = serial_pnp_guess_board(dev);
@@ -439,11 +440,12 @@
memset(&uart, 0, sizeof(uart));
if (pnp_irq_valid(dev, 0))
uart.port.irq = pnp_irq(dev, 0);
- if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
- uart.port.iobase = pnp_port_start(dev, 2);
- uart.port.iotype = UPIO_PORT;
- } else if (pnp_port_valid(dev, 0)) {
- uart.port.iobase = pnp_port_start(dev, 0);
+ if ((flags & CIR_PORT) && pnp_port_valid(dev, 2))
+ res = pnp_get_resource(dev, IORESOURCE_IO, 2);
+ else if (pnp_port_valid(dev, 0))
+ res = pnp_get_resource(dev, IORESOURCE_IO, 0);
+ if (pnp_resource_enabled(res)) {
+ uart.port.iobase = res->start;
uart.port.iotype = UPIO_PORT;
} else if (pnp_mem_valid(dev, 0)) {
uart.port.mapbase = pnp_mem_start(dev, 0);
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index cf9210d..7e7006f 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -211,14 +211,14 @@
config SERIAL_SAMSUNG_UARTS_4
bool
depends on PLAT_SAMSUNG
- default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
+ default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
help
Internal node for the common case of 4 Samsung compatible UARTs
config SERIAL_SAMSUNG_UARTS
int
depends on PLAT_SAMSUNG
- default 6 if ARCH_S5P6450
+ default 6 if CPU_S5P6450
default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
default 3
help
diff --git a/drivers/tty/serial/bcm63xx_uart.c b/drivers/tty/serial/bcm63xx_uart.c
index 719594e..52a3ecd 100644
--- a/drivers/tty/serial/bcm63xx_uart.c
+++ b/drivers/tty/serial/bcm63xx_uart.c
@@ -235,7 +235,7 @@
*/
static void bcm_uart_do_rx(struct uart_port *port)
{
- struct tty_port *port = &port->state->port;
+ struct tty_port *tty_port = &port->state->port;
unsigned int max_count;
/* limit number of char read in interrupt, should not be
@@ -260,7 +260,7 @@
bcm_uart_writel(port, val, UART_CTL_REG);
port->icount.overrun++;
- tty_insert_flip_char(port, 0, TTY_OVERRUN);
+ tty_insert_flip_char(tty_port, 0, TTY_OVERRUN);
}
if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
@@ -299,11 +299,11 @@
if ((cstat & port->ignore_status_mask) == 0)
- tty_insert_flip_char(port, c, flag);
+ tty_insert_flip_char(tty_port, c, flag);
} while (--max_count);
- tty_flip_buffer_push(port);
+ tty_flip_buffer_push(tty_port);
}
/*
diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c
index c0e1fad..018bad9 100644
--- a/drivers/tty/serial/mpc52xx_uart.c
+++ b/drivers/tty/serial/mpc52xx_uart.c
@@ -550,7 +550,7 @@
return 0;
psc_num = (port->mapbase & 0xf00) >> 8;
- snprintf(clk_name, sizeof(clk_name), "psc%d_clk", psc_num);
+ snprintf(clk_name, sizeof(clk_name), "psc%d_mclk", psc_num);
psc_clk = clk_get(port->dev, clk_name);
if (IS_ERR(psc_clk)) {
dev_err(port->dev, "Failed to get PSC clock entry!\n");
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index d587460..b025d54 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -241,6 +241,12 @@
{ .compatible = "ns16850", .data = (void *)PORT_16850, },
{ .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
{ .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
+ { .compatible = "altr,16550-FIFO32",
+ .data = (void *)PORT_ALTR_16550_F32, },
+ { .compatible = "altr,16550-FIFO64",
+ .data = (void *)PORT_ALTR_16550_F64, },
+ { .compatible = "altr,16550-FIFO128",
+ .data = (void *)PORT_ALTR_16550_F128, },
#ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
{ .compatible = "ibm,qpace-nwp-serial",
.data = (void *)PORT_NWPSERIAL, },
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index a3f9dd5..705240e 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -611,14 +611,7 @@
vt8500_port->uart.dev = &pdev->dev;
vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
- vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
- if (!IS_ERR(vt8500_port->clk)) {
- vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
- } else {
- /* use the default of 24Mhz if not specified and warn */
- pr_warn("%s: serial clock source not specified\n", __func__);
- vt8500_port->uart.uartclk = 24000000;
- }
+ vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
snprintf(vt8500_port->name, sizeof(vt8500_port->name),
"VT8500 UART%d", pdev->id);
diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c
index bb11993..578aa75 100644
--- a/drivers/tty/tty_buffer.c
+++ b/drivers/tty/tty_buffer.c
@@ -425,7 +425,7 @@
struct tty_ldisc *disc;
tty = port->itty;
- if (WARN_RATELIMIT(tty == NULL, "tty is NULL\n"))
+ if (tty == NULL)
return;
disc = tty_ldisc_ref(tty);
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index f5ed3d7..8f5ebce 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -46,7 +46,7 @@
obj-$(CONFIG_USB_SERIAL) += serial/
obj-$(CONFIG_USB) += misc/
-obj-$(CONFIG_USB_COMMON) += phy/
+obj-$(CONFIG_USB_OTG_UTILS) += phy/
obj-$(CONFIG_EARLY_PRINTK_DBGP) += early/
obj-$(CONFIG_USB_ATM) += atm/
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c
index a03fbc1..aa49162 100644
--- a/drivers/usb/c67x00/c67x00-sched.c
+++ b/drivers/usb/c67x00/c67x00-sched.c
@@ -100,7 +100,7 @@
#define TD_PIDEP_OFFSET 0x04
#define TD_PIDEPMASK_PID 0xF0
#define TD_PIDEPMASK_EP 0x0F
-#define TD_PORTLENMASK_DL 0x02FF
+#define TD_PORTLENMASK_DL 0x03FF
#define TD_PORTLENMASK_PN 0xC000
#define TD_STATUS_OFFSET 0x07
@@ -590,7 +590,7 @@
{
struct c67x00_td *td;
struct c67x00_urb_priv *urbp = urb->hcpriv;
- const __u8 active_flag = 1, retry_cnt = 1;
+ const __u8 active_flag = 1, retry_cnt = 3;
__u8 cmd = 0;
int tt = 0;
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 2f45bba..f64fbea 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -1767,7 +1767,7 @@
goto put_transceiver;
}
- retval = dbg_create_files(&ci->gadget.dev);
+ retval = dbg_create_files(ci->dev);
if (retval)
goto unreg_device;
@@ -1796,7 +1796,7 @@
dev_err(dev, "error = %i\n", retval);
remove_dbg:
- dbg_remove_files(&ci->gadget.dev);
+ dbg_remove_files(ci->dev);
unreg_device:
device_unregister(&ci->gadget.dev);
put_transceiver:
@@ -1836,7 +1836,7 @@
if (ci->global_phy)
usb_put_phy(ci->transceiver);
}
- dbg_remove_files(&ci->gadget.dev);
+ dbg_remove_files(ci->dev);
device_unregister(&ci->gadget.dev);
/* my kobject is dynamic, I swear! */
memset(&ci->gadget, 0, sizeof(ci->gadget));
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 5f0cb41..122d056 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -56,6 +56,7 @@
#define WDM_RESPONDING 7
#define WDM_SUSPENDING 8
#define WDM_RESETTING 9
+#define WDM_OVERFLOW 10
#define WDM_MAX 16
@@ -155,6 +156,7 @@
{
struct wdm_device *desc = urb->context;
int status = urb->status;
+ int length = urb->actual_length;
spin_lock(&desc->iuspin);
clear_bit(WDM_RESPONDING, &desc->flags);
@@ -185,9 +187,17 @@
}
desc->rerr = status;
- desc->reslength = urb->actual_length;
- memmove(desc->ubuf + desc->length, desc->inbuf, desc->reslength);
- desc->length += desc->reslength;
+ if (length + desc->length > desc->wMaxCommand) {
+ /* The buffer would overflow */
+ set_bit(WDM_OVERFLOW, &desc->flags);
+ } else {
+ /* we may already be in overflow */
+ if (!test_bit(WDM_OVERFLOW, &desc->flags)) {
+ memmove(desc->ubuf + desc->length, desc->inbuf, length);
+ desc->length += length;
+ desc->reslength = length;
+ }
+ }
skip_error:
wake_up(&desc->wait);
@@ -435,6 +445,11 @@
rv = -ENODEV;
goto err;
}
+ if (test_bit(WDM_OVERFLOW, &desc->flags)) {
+ clear_bit(WDM_OVERFLOW, &desc->flags);
+ rv = -ENOBUFS;
+ goto err;
+ }
i++;
if (file->f_flags & O_NONBLOCK) {
if (!test_bit(WDM_READ, &desc->flags)) {
@@ -478,6 +493,7 @@
spin_unlock_irq(&desc->iuspin);
goto retry;
}
+
if (!desc->reslength) { /* zero length read */
dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
clear_bit(WDM_READ, &desc->flags);
@@ -1004,6 +1020,7 @@
struct wdm_device *desc = wdm_find_device(intf);
int rv;
+ clear_bit(WDM_OVERFLOW, &desc->flags);
clear_bit(WDM_RESETTING, &desc->flags);
rv = recover_from_urb_loss(desc);
mutex_unlock(&desc->wlock);
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 9999094..ffa6b00 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -583,6 +583,7 @@
break;
}
+ dwc3_free_event_buffers(dwc);
dwc3_core_exit(dwc);
return 0;
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index b50da53..b082bec 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -23,8 +23,6 @@
#include <linux/usb/nop-usb-xceiv.h>
#include <linux/of.h>
-#include "core.h"
-
struct dwc3_exynos {
struct platform_device *dwc3;
struct platform_device *usb2_phy;
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 22f337f..afa05e3 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -54,8 +54,6 @@
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
-#include "core.h"
-
/*
* All these registers belong to OMAP's Wrapper around the
* DesignWare USB3 Core.
@@ -465,20 +463,20 @@
return 0;
}
-static const struct of_device_id of_dwc3_matach[] = {
+static const struct of_device_id of_dwc3_match[] = {
{
"ti,dwc3",
},
{ },
};
-MODULE_DEVICE_TABLE(of, of_dwc3_matach);
+MODULE_DEVICE_TABLE(of, of_dwc3_match);
static struct platform_driver dwc3_omap_driver = {
.probe = dwc3_omap_probe,
.remove = dwc3_omap_remove,
.driver = {
.name = "omap-dwc3",
- .of_match_table = of_dwc3_matach,
+ .of_match_table = of_dwc3_match,
},
};
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 7d70f44..e8d7768 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -45,8 +45,6 @@
#include <linux/usb/otg.h>
#include <linux/usb/nop-usb-xceiv.h>
-#include "core.h"
-
/* FIXME define these in <linux/pci_ids.h> */
#define PCI_VENDOR_ID_SYNOPSYS 0x16c3
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index d7da073..1d139ca 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -891,7 +891,8 @@
DWC3_TRBCTL_CONTROL_DATA);
} else if (!IS_ALIGNED(req->request.length, dep->endpoint.maxpacket)
&& (dep->number == 0)) {
- u32 transfer_size;
+ u32 transfer_size;
+ u32 maxpacket;
ret = usb_gadget_map_request(&dwc->gadget, &req->request,
dep->number);
@@ -902,8 +903,8 @@
WARN_ON(req->request.length > DWC3_EP0_BOUNCE_SIZE);
- transfer_size = roundup(req->request.length,
- (u32) dep->endpoint.maxpacket);
+ maxpacket = dep->endpoint.maxpacket;
+ transfer_size = roundup(req->request.length, maxpacket);
dwc->ep0_bounced = true;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index a04342f..82e160e 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2159,7 +2159,6 @@
static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
{
- struct dwc3_gadget_ep_cmd_params params;
struct dwc3_ep *dep;
int ret;
u32 reg;
@@ -2167,8 +2166,6 @@
dev_vdbg(dwc->dev, "%s\n", __func__);
- memset(¶ms, 0x00, sizeof(params));
-
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
speed = reg & DWC3_DSTS_CONNECTSPD;
dwc->speed = speed;
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 97a13c3..82fb225 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -35,6 +35,12 @@
obj-$(CONFIG_USB_FUSB300) += fusb300_udc.o
obj-$(CONFIG_USB_MV_U3D) += mv_u3d_core.o
+# USB Functions
+obj-$(CONFIG_USB_F_ACM) += f_acm.o
+f_ss_lb-y := f_loopback.o f_sourcesink.o
+obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o
+obj-$(CONFIG_USB_U_SERIAL) += u_serial.o
+
#
# USB gadget drivers
#
@@ -74,9 +80,3 @@
obj-$(CONFIG_USB_G_NCM) += g_ncm.o
obj-$(CONFIG_USB_G_ACM_MS) += g_acm_ms.o
obj-$(CONFIG_USB_GADGET_TARGET) += tcm_usb_gadget.o
-
-# USB Functions
-obj-$(CONFIG_USB_F_ACM) += f_acm.o
-f_ss_lb-y := f_loopback.o f_sourcesink.o
-obj-$(CONFIG_USB_F_SS_LB) += f_ss_lb.o
-obj-$(CONFIG_USB_U_SERIAL) += u_serial.o
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 7c821de..c0d62b2 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -1757,10 +1757,7 @@
/**
* usb_composite_probe() - register a composite driver
* @driver: the driver to register
- * @bind: the callback used to allocate resources that are shared across the
- * whole device, such as string IDs, and add its configurations using
- * @usb_add_config(). This may fail by returning a negative errno
- * value; it should return zero on successful initialization.
+ *
* Context: single threaded during gadget setup
*
* This function is used to register drivers using the composite driver
diff --git a/drivers/usb/gadget/f_uac1.c b/drivers/usb/gadget/f_uac1.c
index f570e66..fa8ea4e 100644
--- a/drivers/usb/gadget/f_uac1.c
+++ b/drivers/usb/gadget/f_uac1.c
@@ -418,6 +418,7 @@
req->context = audio;
req->complete = f_audio_complete;
+ len = min_t(size_t, sizeof(value), len);
memcpy(req->buf, &value, len);
return len;
diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c
index 8efd7555..5bd930d 100644
--- a/drivers/usb/gadget/imx_udc.c
+++ b/drivers/usb/gadget/imx_udc.c
@@ -1334,27 +1334,18 @@
struct usb_gadget_driver *driver)
{
struct imx_udc_struct *imx_usb;
- int retval;
imx_usb = container_of(gadget, struct imx_udc_struct, gadget);
/* first hook up the driver ... */
imx_usb->driver = driver;
imx_usb->gadget.dev.driver = &driver->driver;
- retval = device_add(&imx_usb->gadget.dev);
- if (retval)
- goto fail;
-
D_INI(imx_usb->dev, "<%s> registered gadget driver '%s'\n",
__func__, driver->driver.name);
imx_udc_enable(imx_usb);
return 0;
-fail:
- imx_usb->driver = NULL;
- imx_usb->gadget.dev.driver = NULL;
- return retval;
}
static int imx_udc_stop(struct usb_gadget *gadget,
@@ -1370,8 +1361,6 @@
imx_usb->gadget.dev.driver = NULL;
imx_usb->driver = NULL;
- device_del(&imx_usb->gadget.dev);
-
D_INI(imx_usb->dev, "<%s> unregistered gadget driver '%s'\n",
__func__, driver->driver.name);
@@ -1477,6 +1466,10 @@
imx_usb->gadget.dev.parent = &pdev->dev;
imx_usb->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ ret = device_add(&imx_usb->gadget.dev);
+ if (retval)
+ goto fail4;
+
platform_set_drvdata(pdev, imx_usb);
usb_init_data(imx_usb);
@@ -1488,9 +1481,11 @@
ret = usb_add_gadget_udc(&pdev->dev, &imx_usb->gadget);
if (ret)
- goto fail4;
+ goto fail5;
return 0;
+fail5:
+ device_unregister(&imx_usb->gadget.dev);
fail4:
for (i = 0; i < IMX_USB_NB_EP + 1; i++)
free_irq(imx_usb->usbd_int[i], imx_usb);
@@ -1514,6 +1509,7 @@
int i;
usb_del_gadget_udc(&imx_usb->gadget);
+ device_unregister(&imx_usb->gadget.dev);
imx_udc_disable(imx_usb);
del_timer(&imx_usb->timer);
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 06be85c..f8445653 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -62,6 +62,7 @@
#define DRIVER_VERSION "4 October 2004"
#define OMAP_DMA_USB_W2FC_TX0 29
+#define OMAP_DMA_USB_W2FC_RX0 26
/*
* The OMAP UDC needs _very_ early endpoint setup: before enabling the
@@ -1310,7 +1311,7 @@
}
static int omap_udc_start(struct usb_gadget *g,
- struct usb_gadget_driver *driver)
+ struct usb_gadget_driver *driver);
static int omap_udc_stop(struct usb_gadget *g,
struct usb_gadget_driver *driver);
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 2bbcdce..d0f3748 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -1266,13 +1266,6 @@
dev->gadget.dev.driver = &driver->driver;
dev->pullup = 1;
- retval = device_add (&dev->gadget.dev);
- if (retval) {
- dev->driver = NULL;
- dev->gadget.dev.driver = NULL;
- return retval;
- }
-
/* ... then enable host detection and ep0; and we're ready
* for set_configuration as well as eventual disconnect.
*/
@@ -1310,6 +1303,10 @@
}
del_timer_sync(&dev->timer);
+ /* report disconnect; the driver is already quiesced */
+ if (driver)
+ driver->disconnect(&dev->gadget);
+
/* re-init driver-visible data structures */
udc_reinit(dev);
}
@@ -1331,7 +1328,6 @@
dev->gadget.dev.driver = NULL;
dev->driver = NULL;
- device_del (&dev->gadget.dev);
dump_state(dev);
return 0;
@@ -2146,6 +2142,13 @@
dev->gadget.dev.parent = &pdev->dev;
dev->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ retval = device_add(&dev->gadget.dev);
+ if (retval) {
+ dev->driver = NULL;
+ dev->gadget.dev.driver = NULL;
+ goto err_device_add;
+ }
+
the_controller = dev;
platform_set_drvdata(pdev, dev);
@@ -2196,6 +2199,8 @@
free_irq(irq, dev);
#endif
err_irq1:
+ device_unregister(&dev->gadget.dev);
+ err_device_add:
if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
err_gpio_pullup:
@@ -2217,10 +2222,11 @@
{
struct pxa25x_udc *dev = platform_get_drvdata(pdev);
- usb_del_gadget_udc(&dev->gadget);
if (dev->driver)
return -EBUSY;
+ usb_del_gadget_udc(&dev->gadget);
+ device_unregister(&dev->gadget.dev);
dev->pullup = 0;
pullup(dev);
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index f7d2579..2fc8676 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1814,11 +1814,6 @@
udc->gadget.dev.driver = &driver->driver;
dplus_pullup(udc, 1);
- retval = device_add(&udc->gadget.dev);
- if (retval) {
- dev_err(udc->dev, "device_add error %d\n", retval);
- goto fail;
- }
if (!IS_ERR_OR_NULL(udc->transceiver)) {
retval = otg_set_peripheral(udc->transceiver->otg,
&udc->gadget);
@@ -1876,7 +1871,6 @@
udc->driver = NULL;
- device_del(&udc->gadget.dev);
if (!IS_ERR_OR_NULL(udc->transceiver))
return otg_set_peripheral(udc->transceiver->otg, NULL);
@@ -2480,13 +2474,24 @@
driver_name, udc->irq, retval);
goto err_irq;
}
+
+ retval = device_add(&udc->gadget.dev);
+ if (retval) {
+ dev_err(udc->dev, "device_add error %d\n", retval);
+ goto err_dev_add;
+ }
+
retval = usb_add_gadget_udc(&pdev->dev, &udc->gadget);
if (retval)
goto err_add_udc;
pxa_init_debugfs(udc);
+
return 0;
+
err_add_udc:
+ device_unregister(&udc->gadget.dev);
+err_dev_add:
free_irq(udc->irq, udc);
err_irq:
iounmap(udc->regs);
@@ -2507,6 +2512,7 @@
int gpio = udc->mach->gpio_pullup;
usb_del_gadget_udc(&udc->gadget);
+ device_del(&udc->gadget.dev);
usb_gadget_unregister_driver(udc->driver);
free_irq(udc->irq, udc);
pxa_cleanup_debugfs(udc);
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index fc07b43..08f8965 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -1668,8 +1668,7 @@
static int s3c2410_udc_start(struct usb_gadget *g,
struct usb_gadget_driver *driver)
{
- struct s3c2410_udc *udc = to_s3c2410(g)
- int retval;
+ struct s3c2410_udc *udc = to_s3c2410(g);
dprintk(DEBUG_NORMAL, "%s() '%s'\n", __func__, driver->driver.name);
@@ -1677,22 +1676,10 @@
udc->driver = driver;
udc->gadget.dev.driver = &driver->driver;
- /* Bind the driver */
- retval = device_add(&udc->gadget.dev);
- if (retval) {
- dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
- goto register_error;
- }
-
/* Enable udc */
s3c2410_udc_enable(udc);
return 0;
-
-register_error:
- udc->driver = NULL;
- udc->gadget.dev.driver = NULL;
- return retval;
}
static int s3c2410_udc_stop(struct usb_gadget *g,
@@ -1700,7 +1687,6 @@
{
struct s3c2410_udc *udc = to_s3c2410(g);
- device_del(&udc->gadget.dev);
udc->driver = NULL;
/* Disable udc */
@@ -1842,6 +1828,13 @@
udc->gadget.dev.parent = &pdev->dev;
udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
+ /* Bind the driver */
+ retval = device_add(&udc->gadget.dev);
+ if (retval) {
+ dev_err(&udc->gadget.dev, "Error in device_add() : %d\n", retval);
+ goto err_device_add;
+ }
+
the_controller = udc;
platform_set_drvdata(pdev, udc);
@@ -1930,6 +1923,8 @@
err_int:
free_irq(IRQ_USBD, udc);
err_map:
+ device_unregister(&udc->gadget.dev);
+err_device_add:
iounmap(base_addr);
err_mem:
release_mem_region(rsrc_start, rsrc_len);
@@ -1947,10 +1942,11 @@
dev_dbg(&pdev->dev, "%s()\n", __func__);
- usb_del_gadget_udc(&udc->gadget);
if (udc->driver)
return -EBUSY;
+ usb_del_gadget_udc(&udc->gadget);
+ device_unregister(&udc->gadget.dev);
debugfs_remove(udc->regs_info);
if (udc_info && !udc_info->udc_command &&
diff --git a/drivers/usb/gadget/u_uac1.c b/drivers/usb/gadget/u_uac1.c
index e0c5e88..c7d460f 100644
--- a/drivers/usb/gadget/u_uac1.c
+++ b/drivers/usb/gadget/u_uac1.c
@@ -240,8 +240,11 @@
snd = &card->playback;
snd->filp = filp_open(fn_play, O_WRONLY, 0);
if (IS_ERR(snd->filp)) {
+ int ret = PTR_ERR(snd->filp);
+
ERROR(card, "No such PCM playback device: %s\n", fn_play);
snd->filp = NULL;
+ return ret;
}
pcm_file = snd->filp->private_data;
snd->substream = pcm_file->substream;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index b416a3f..5726cb1 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -748,11 +748,9 @@
/* guard against (alleged) silicon errata */
if (cmd & CMD_IAAD)
ehci_dbg(ehci, "IAA with IAAD still set?\n");
- if (ehci->async_iaa) {
+ if (ehci->async_iaa)
COUNT(ehci->stats.iaa);
- end_unlink_async(ehci);
- } else
- ehci_dbg(ehci, "IAA with nothing unlinked?\n");
+ end_unlink_async(ehci);
}
/* remote wakeup [4.3.1] */
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index fd252f0..5464665 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -135,7 +135,7 @@
* qtd is updated in qh_completions(). Update the QH
* overlay here.
*/
- if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) {
+ if (qh->hw->hw_token & ACTIVE_BIT(ehci)) {
qh->hw->hw_qtd_next = qtd->hw_next;
qtd = NULL;
}
@@ -449,11 +449,19 @@
else if (last_status == -EINPROGRESS && !urb->unlinked)
continue;
- /* qh unlinked; token in overlay may be most current */
- if (state == QH_STATE_IDLE
- && cpu_to_hc32(ehci, qtd->qtd_dma)
- == hw->hw_current) {
+ /*
+ * If this was the active qtd when the qh was unlinked
+ * and the overlay's token is active, then the overlay
+ * hasn't been written back to the qtd yet so use its
+ * token instead of the qtd's. After the qtd is
+ * processed and removed, the overlay won't be valid
+ * any more.
+ */
+ if (state == QH_STATE_IDLE &&
+ qh->qtd_list.next == &qtd->qtd_list &&
+ (hw->hw_token & ACTIVE_BIT(ehci))) {
token = hc32_to_cpu(ehci, hw->hw_token);
+ hw->hw_token &= ~ACTIVE_BIT(ehci);
/* An unlink may leave an incomplete
* async transaction in the TT buffer.
@@ -1170,7 +1178,7 @@
struct ehci_qh *prev;
/* Add to the end of the list of QHs waiting for the next IAAD */
- qh->qh_state = QH_STATE_UNLINK;
+ qh->qh_state = QH_STATE_UNLINK_WAIT;
if (ehci->async_unlink)
ehci->async_unlink_last->unlink_next = qh;
else
@@ -1213,9 +1221,19 @@
/* Do only the first waiting QH (nVidia bug?) */
qh = ehci->async_unlink;
- ehci->async_iaa = qh;
- ehci->async_unlink = qh->unlink_next;
- qh->unlink_next = NULL;
+
+ /*
+ * Intel (?) bug: The HC can write back the overlay region
+ * even after the IAA interrupt occurs. In self-defense,
+ * always go through two IAA cycles for each QH.
+ */
+ if (qh->qh_state == QH_STATE_UNLINK_WAIT) {
+ qh->qh_state = QH_STATE_UNLINK;
+ } else {
+ ehci->async_iaa = qh;
+ ehci->async_unlink = qh->unlink_next;
+ qh->unlink_next = NULL;
+ }
/* Make sure the unlinks are all visible to the hardware */
wmb();
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 45b19e2..05e5143 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -7,11 +7,6 @@
config USB_MUSB_HDRC
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
depends on USB && USB_GADGET
- select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
- select NOP_USB_XCEIV if (SOC_TI81XX || SOC_AM33XX)
- select TWL4030_USB if MACH_OMAP_3430SDP
- select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
- select OMAP_CONTROL_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
select USB_OTG_UTILS
help
Say Y here if your system has a dual role high speed USB
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 60b41cc..daec6e0 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1624,8 +1624,6 @@
/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_SYSFS
-
static ssize_t
musb_mode_show(struct device *dev, struct device_attribute *attr, char *buf)
{
@@ -1742,8 +1740,6 @@
.attrs = musb_attributes,
};
-#endif /* sysfs */
-
/* Only used to provide driver mode change events */
static void musb_irq_work(struct work_struct *data)
{
@@ -1968,11 +1964,9 @@
if (status < 0)
goto fail4;
-#ifdef CONFIG_SYSFS
status = sysfs_create_group(&musb->controller->kobj, &musb_attr_group);
if (status)
goto fail5;
-#endif
pm_runtime_put(musb->controller);
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 1762354..1a42a45 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -51,7 +51,7 @@
};
#define glue_to_musb(g) platform_get_drvdata(g->musb)
-struct omap2430_glue *_glue;
+static struct omap2430_glue *_glue;
static struct timer_list musb_idle_timer;
@@ -237,9 +237,13 @@
{
struct omap2430_glue *glue = _glue;
- if (glue && glue_to_musb(glue)) {
- glue->status = status;
- } else {
+ if (!glue) {
+ pr_err("%s: musb core is not yet initialized\n", __func__);
+ return;
+ }
+ glue->status = status;
+
+ if (!glue_to_musb(glue)) {
pr_err("%s: musb core is not yet ready\n", __func__);
return;
}
diff --git a/drivers/usb/otg/otg.c b/drivers/usb/otg/otg.c
index e181439..2bd03d2 100644
--- a/drivers/usb/otg/otg.c
+++ b/drivers/usb/otg/otg.c
@@ -130,7 +130,7 @@
spin_lock_irqsave(&phy_lock, flags);
phy = __usb_find_phy(&phy_list, type);
- if (IS_ERR(phy)) {
+ if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
pr_err("unable to find transceiver of type %s\n",
usb_phy_type_string(type));
goto err0;
@@ -228,7 +228,7 @@
spin_lock_irqsave(&phy_lock, flags);
phy = __usb_find_phy_dev(dev, &phy_bind_list, index);
- if (IS_ERR(phy)) {
+ if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) {
pr_err("unable to find transceiver\n");
goto err0;
}
@@ -301,8 +301,12 @@
*/
void usb_put_phy(struct usb_phy *x)
{
- if (x)
+ if (x) {
+ struct module *owner = x->dev->driver->owner;
+
put_device(x->dev);
+ module_put(owner);
+ }
}
EXPORT_SYMBOL(usb_put_phy);
diff --git a/drivers/usb/phy/omap-control-usb.c b/drivers/usb/phy/omap-control-usb.c
index 5323b71..1419ced 100644
--- a/drivers/usb/phy/omap-control-usb.c
+++ b/drivers/usb/phy/omap-control-usb.c
@@ -219,32 +219,26 @@
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"control_dev_conf");
- control_usb->dev_conf = devm_request_and_ioremap(&pdev->dev, res);
- if (!control_usb->dev_conf) {
- dev_err(&pdev->dev, "Failed to obtain io memory\n");
- return -EADDRNOTAVAIL;
- }
+ control_usb->dev_conf = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(control_usb->dev_conf))
+ return PTR_ERR(control_usb->dev_conf);
if (control_usb->type == OMAP_CTRL_DEV_TYPE1) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"otghs_control");
- control_usb->otghs_control = devm_request_and_ioremap(
+ control_usb->otghs_control = devm_ioremap_resource(
&pdev->dev, res);
- if (!control_usb->otghs_control) {
- dev_err(&pdev->dev, "Failed to obtain io memory\n");
- return -EADDRNOTAVAIL;
- }
+ if (IS_ERR(control_usb->otghs_control))
+ return PTR_ERR(control_usb->otghs_control);
}
if (control_usb->type == OMAP_CTRL_DEV_TYPE2) {
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"phy_power_usb");
- control_usb->phy_power = devm_request_and_ioremap(
+ control_usb->phy_power = devm_ioremap_resource(
&pdev->dev, res);
- if (!control_usb->phy_power) {
- dev_dbg(&pdev->dev, "Failed to obtain io memory\n");
- return -EADDRNOTAVAIL;
- }
+ if (IS_ERR(control_usb->phy_power))
+ return PTR_ERR(control_usb->phy_power);
control_usb->sys_clk = devm_clk_get(control_usb->dev,
"sys_clkin");
diff --git a/drivers/usb/phy/omap-usb3.c b/drivers/usb/phy/omap-usb3.c
index fadc0c2..a6e60b1 100644
--- a/drivers/usb/phy/omap-usb3.c
+++ b/drivers/usb/phy/omap-usb3.c
@@ -212,11 +212,9 @@
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl");
- phy->pll_ctrl_base = devm_request_and_ioremap(&pdev->dev, res);
- if (!phy->pll_ctrl_base) {
- dev_err(&pdev->dev, "ioremap of pll_ctrl failed\n");
- return -ENOMEM;
- }
+ phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(phy->pll_ctrl_base))
+ return PTR_ERR(phy->pll_ctrl_base);
phy->dev = &pdev->dev;
diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c
index 6ea5537..967101e 100644
--- a/drivers/usb/phy/samsung-usbphy.c
+++ b/drivers/usb/phy/samsung-usbphy.c
@@ -787,11 +787,9 @@
return -ENODEV;
}
- phy_base = devm_request_and_ioremap(dev, phy_mem);
- if (!phy_base) {
- dev_err(dev, "%s: register mapping failed\n", __func__);
- return -ENXIO;
- }
+ phy_base = devm_ioremap_resource(dev, phy_mem);
+ if (IS_ERR(phy_base))
+ return PTR_ERR(phy_base);
sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
if (!sphy)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index edc0f0d..4747d1c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -85,6 +85,7 @@
{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+ { USB_DEVICE(0x2405, 0x0003) }, /* West Mountain Radio RIGblaster Advantage */
{ USB_DEVICE(0x10C4, 0x8156) }, /* B&G H3000 link cable */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
{ USB_DEVICE(0x10C4, 0x815F) }, /* Timewave HamLinkUSB */
@@ -150,6 +151,25 @@
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
+ { USB_DEVICE(0x1FB9, 0x0100) }, /* Lake Shore Model 121 Current Source */
+ { USB_DEVICE(0x1FB9, 0x0200) }, /* Lake Shore Model 218A Temperature Monitor */
+ { USB_DEVICE(0x1FB9, 0x0201) }, /* Lake Shore Model 219 Temperature Monitor */
+ { USB_DEVICE(0x1FB9, 0x0202) }, /* Lake Shore Model 233 Temperature Transmitter */
+ { USB_DEVICE(0x1FB9, 0x0203) }, /* Lake Shore Model 235 Temperature Transmitter */
+ { USB_DEVICE(0x1FB9, 0x0300) }, /* Lake Shore Model 335 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0301) }, /* Lake Shore Model 336 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0302) }, /* Lake Shore Model 350 Temperature Controller */
+ { USB_DEVICE(0x1FB9, 0x0303) }, /* Lake Shore Model 371 AC Bridge */
+ { USB_DEVICE(0x1FB9, 0x0400) }, /* Lake Shore Model 411 Handheld Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0401) }, /* Lake Shore Model 425 Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0402) }, /* Lake Shore Model 455A Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0403) }, /* Lake Shore Model 475A Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0404) }, /* Lake Shore Model 465 Three Axis Gaussmeter */
+ { USB_DEVICE(0x1FB9, 0x0600) }, /* Lake Shore Model 625A Superconducting MPS */
+ { USB_DEVICE(0x1FB9, 0x0601) }, /* Lake Shore Model 642A Magnet Power Supply */
+ { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */
+ { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */
+ { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */
{ USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */
{ USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */
{ USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index f7d339d..558adfc 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -341,6 +341,8 @@
#define CINTERION_PRODUCT_EU3_E 0x0051
#define CINTERION_PRODUCT_EU3_P 0x0052
#define CINTERION_PRODUCT_PH8 0x0053
+#define CINTERION_PRODUCT_AH6 0x0055
+#define CINTERION_PRODUCT_PLS8 0x0060
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
@@ -579,6 +581,7 @@
{ USB_DEVICE(QUANTA_VENDOR_ID, 0xea42),
.driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c1f, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff),
.driver_info = (kernel_ulong_t) &net_intf1_blacklist },
@@ -1260,6 +1263,8 @@
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AH6) },
+ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLS8) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) },
{ USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC25_MDM) },
diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c
index 9b1b96f..31f81c3 100644
--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -69,6 +69,7 @@
{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) }, /* NMEA */
{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) }, /* WMC */
{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) }, /* DIAG */
+ { USB_DEVICE_AND_INTERFACE_INFO(0x1fac, 0x0151, 0xff, 0xff, 0xff) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 2466254..59b32b7 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -197,12 +197,15 @@
if (is_gobi1k) {
/* Gobi 1K USB layout:
- * 0: serial port (doesn't respond)
+ * 0: DM/DIAG (use libqcdm from ModemManager for communication)
* 1: serial port (doesn't respond)
* 2: AT-capable modem port
* 3: QMI/net
*/
- if (ifnum == 2)
+ if (ifnum == 0) {
+ dev_dbg(dev, "Gobi 1K DM/DIAG interface found\n");
+ altsetting = 1;
+ } else if (ifnum == 2)
dev_dbg(dev, "Modem port found\n");
else
altsetting = -1;
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 00e6c9b..d643a4d 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -661,7 +661,9 @@
__func__);
break;
}
- tty_flip_buffer_push(&port->port);
+
+ if (port_priv->is_open)
+ tty_flip_buffer_push(&port->port);
newport = *(ch + 3);
@@ -704,7 +706,8 @@
tty_insert_flip_string(&port->port, ch, 1);
}
- tty_flip_buffer_push(&port->port);
+ if (port_priv->is_open)
+ tty_flip_buffer_push(&port->port);
}
static void qt2_write_bulk_callback(struct urb *urb)
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 7ab9046..105d900 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -92,8 +92,8 @@
return 0;
}
-/* This places the HUAWEI usb dongles in multi-port mode */
-static int usb_stor_huawei_feature_init(struct us_data *us)
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us)
{
int result;
@@ -104,75 +104,3 @@
US_DEBUGP("Huawei mode set result is %d\n", result);
return 0;
}
-
-/*
- * It will send a scsi switch command called rewind' to huawei dongle.
- * When the dongle receives this command at the first time,
- * it will reboot immediately. After rebooted, it will ignore this command.
- * So it is unnecessary to read its response.
- */
-static int usb_stor_huawei_scsi_init(struct us_data *us)
-{
- int result = 0;
- int act_len = 0;
- struct bulk_cb_wrap *bcbw = (struct bulk_cb_wrap *) us->iobuf;
- char rewind_cmd[] = {0x11, 0x06, 0x20, 0x00, 0x00, 0x01, 0x01, 0x00,
- 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
- bcbw->Signature = cpu_to_le32(US_BULK_CB_SIGN);
- bcbw->Tag = 0;
- bcbw->DataTransferLength = 0;
- bcbw->Flags = bcbw->Lun = 0;
- bcbw->Length = sizeof(rewind_cmd);
- memset(bcbw->CDB, 0, sizeof(bcbw->CDB));
- memcpy(bcbw->CDB, rewind_cmd, sizeof(rewind_cmd));
-
- result = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, bcbw,
- US_BULK_CB_WRAP_LEN, &act_len);
- US_DEBUGP("transfer actual length=%d, result=%d\n", act_len, result);
- return result;
-}
-
-/*
- * It tries to find the supported Huawei USB dongles.
- * In Huawei, they assign the following product IDs
- * for all of their mobile broadband dongles,
- * including the new dongles in the future.
- * So if the product ID is not included in this list,
- * it means it is not Huawei's mobile broadband dongles.
- */
-static int usb_stor_huawei_dongles_pid(struct us_data *us)
-{
- struct usb_interface_descriptor *idesc;
- int idProduct;
-
- idesc = &us->pusb_intf->cur_altsetting->desc;
- idProduct = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
- /* The first port is CDROM,
- * means the dongle in the single port mode,
- * and a switch command is required to be sent. */
- if (idesc && idesc->bInterfaceNumber == 0) {
- if ((idProduct == 0x1001)
- || (idProduct == 0x1003)
- || (idProduct == 0x1004)
- || (idProduct >= 0x1401 && idProduct <= 0x1500)
- || (idProduct >= 0x1505 && idProduct <= 0x1600)
- || (idProduct >= 0x1c02 && idProduct <= 0x2202)) {
- return 1;
- }
- }
- return 0;
-}
-
-int usb_stor_huawei_init(struct us_data *us)
-{
- int result = 0;
-
- if (usb_stor_huawei_dongles_pid(us)) {
- if (le16_to_cpu(us->pusb_dev->descriptor.idProduct) >= 0x1446)
- result = usb_stor_huawei_scsi_init(us);
- else
- result = usb_stor_huawei_feature_init(us);
- }
- return result;
-}
diff --git a/drivers/usb/storage/initializers.h b/drivers/usb/storage/initializers.h
index 5376d4f..529327f 100644
--- a/drivers/usb/storage/initializers.h
+++ b/drivers/usb/storage/initializers.h
@@ -46,5 +46,5 @@
* flash reader */
int usb_stor_ucr61s2b_init(struct us_data *us);
-/* This places the HUAWEI usb dongles in multi-port mode */
-int usb_stor_huawei_init(struct us_data *us);
+/* This places the HUAWEI E220 devices in multi-port mode */
+int usb_stor_huawei_e220_init(struct us_data *us);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 72923b5..da04a07 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -53,6 +53,14 @@
* as opposed to devices that do something strangely or wrongly.
*/
+/* In-kernel mode switching is deprecated. Do not add new devices to
+ * this list for the sole purpose of switching them to a different
+ * mode. Existing userspace solutions are superior.
+ *
+ * New mode switching devices should instead be added to the database
+ * maintained at http://www.draisberghof.de/usb_modeswitch/
+ */
+
#if !defined(CONFIG_USB_STORAGE_SDDR09) && \
!defined(CONFIG_USB_STORAGE_SDDR09_MODULE)
#define NO_SDDR09
@@ -1527,10 +1535,335 @@
/* Reported by fangxiaozhi <huananhu@huawei.com>
* This brings the HUAWEI data card devices into multi-port mode
*/
-UNUSUAL_VENDOR_INTF(0x12d1, 0x08, 0x06, 0x50,
+UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000,
"HUAWEI MOBILE",
"Mass Storage",
- USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_init,
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
+ 0),
+UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000,
+ "HUAWEI MOBILE",
+ "Mass Storage",
+ USB_SC_DEVICE, USB_PR_DEVICE, usb_stor_huawei_e220_init,
0),
/* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 12cf5f3..025428e 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -422,17 +422,22 @@
= var->bits_per_pixel;
break;
case 16:
+ /* Older SOCs use IBGR:555 rather than BGR:565. */
+ if (sinfo->have_intensity_bit)
+ var->green.length = 5;
+ else
+ var->green.length = 6;
+
if (sinfo->lcd_wiring_mode == ATMEL_LCDC_WIRING_RGB) {
- /* RGB:565 mode */
- var->red.offset = 11;
+ /* RGB:5X5 mode */
+ var->red.offset = var->green.length + 5;
var->blue.offset = 0;
} else {
- /* BGR:565 mode */
+ /* BGR:5X5 mode */
var->red.offset = 0;
- var->blue.offset = 11;
+ var->blue.offset = var->green.length + 5;
}
var->green.offset = 5;
- var->green.length = 6;
var->red.length = var->blue.length = 5;
break;
case 32:
@@ -679,8 +684,7 @@
case FB_VISUAL_PSEUDOCOLOR:
if (regno < 256) {
- if (cpu_is_at91sam9261() || cpu_is_at91sam9263()
- || cpu_is_at91sam9rl()) {
+ if (sinfo->have_intensity_bit) {
/* old style I+BGR:555 */
val = ((red >> 11) & 0x001f);
val |= ((green >> 6) & 0x03e0);
@@ -870,6 +874,10 @@
}
sinfo->info = info;
sinfo->pdev = pdev;
+ if (cpu_is_at91sam9261() || cpu_is_at91sam9263() ||
+ cpu_is_at91sam9rl()) {
+ sinfo->have_intensity_bit = true;
+ }
strcpy(info->fix.id, sinfo->pdev->name);
info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/omap/lcd_ams_delta.c
index ed4cad8..4a5f2cd 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/omap/lcd_ams_delta.c
@@ -27,6 +27,7 @@
#include <linux/lcd.h>
#include <linux/gpio.h>
+#include <mach/hardware.h>
#include <mach/board-ams-delta.h>
#include "omapfb.h"
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
index 3aa62da..7fbe04b 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/omap/lcd_osk.c
@@ -24,7 +24,10 @@
#include <linux/platform_device.h>
#include <asm/gpio.h>
+
+#include <mach/hardware.h>
#include <mach/mux.h>
+
#include "omapfb.h"
static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index d39dfa4..46d9701 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -47,11 +47,13 @@
return gpio_get_value(pdata->pin) ? 1 : 0;
}
+#if defined(CONFIG_OF)
static struct of_device_id w1_gpio_dt_ids[] = {
{ .compatible = "w1-gpio" },
{}
};
MODULE_DEVICE_TABLE(of, w1_gpio_dt_ids);
+#endif
static int w1_gpio_probe_dt(struct platform_device *pdev)
{
@@ -158,7 +160,7 @@
return err;
}
-static int __exit w1_gpio_remove(struct platform_device *pdev)
+static int w1_gpio_remove(struct platform_device *pdev)
{
struct w1_bus_master *master = platform_get_drvdata(pdev);
struct w1_gpio_platform_data *pdata = pdev->dev.platform_data;
@@ -210,7 +212,7 @@
.of_match_table = of_match_ptr(w1_gpio_dt_ids),
},
.probe = w1_gpio_probe,
- .remove = __exit_p(w1_gpio_remove),
+ .remove = w1_gpio_remove,
.suspend = w1_gpio_suspend,
.resume = w1_gpio_resume,
};
diff --git a/drivers/w1/w1.c b/drivers/w1/w1.c
index 7994d933..7ce277d 100644
--- a/drivers/w1/w1.c
+++ b/drivers/w1/w1.c
@@ -924,7 +924,8 @@
tmp64 = (triplet_ret >> 2);
rn |= (tmp64 << i);
- if (kthread_should_stop()) {
+ /* ensure we're called from kthread and not by netlink callback */
+ if (!dev->priv && kthread_should_stop()) {
mutex_unlock(&dev->bus_mutex);
dev_dbg(&dev->dev, "Abort w1_search\n");
return;
diff --git a/drivers/xen/xen-acpi-processor.c b/drivers/xen/xen-acpi-processor.c
index 316df65..f3278a6 100644
--- a/drivers/xen/xen-acpi-processor.c
+++ b/drivers/xen/xen-acpi-processor.c
@@ -500,16 +500,16 @@
(void)acpi_processor_preregister_performance(acpi_perf_data);
for_each_possible_cpu(i) {
+ struct acpi_processor *pr;
struct acpi_processor_performance *perf;
+ pr = per_cpu(processors, i);
perf = per_cpu_ptr(acpi_perf_data, i);
- rc = acpi_processor_register_performance(perf, i);
+ pr->performance = perf;
+ rc = acpi_processor_get_performance_info(pr);
if (rc)
goto err_out;
}
- rc = acpi_processor_notify_smm(THIS_MODULE);
- if (rc)
- goto err_unregister;
for_each_possible_cpu(i) {
struct acpi_processor *_pr;
diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c
index 37c1f82..b98cf0c 100644
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -113,7 +113,8 @@
if (dev->msi_enabled)
pci_disable_msi(dev);
#endif
- pci_disable_device(dev);
+ if (pci_is_enabled(dev))
+ pci_disable_device(dev);
pci_write_config_word(dev, PCI_COMMAND, 0);
diff --git a/drivers/xen/xen-stub.c b/drivers/xen/xen-stub.c
index d85e411..bbef194 100644
--- a/drivers/xen/xen-stub.c
+++ b/drivers/xen/xen-stub.c
@@ -25,7 +25,6 @@
#include <linux/export.h>
#include <linux/types.h>
#include <linux/acpi.h>
-#include <acpi/acpi_drivers.h>
#include <xen/acpi.h>
#ifdef CONFIG_ACPI
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 3e074da..9ac2eca 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -1467,8 +1467,11 @@
if (ret && !insert) {
err = -ENOENT;
goto out;
+ } else if (ret) {
+ err = -EIO;
+ WARN_ON(1);
+ goto out;
}
- BUG_ON(ret); /* Corruption */
leaf = path->nodes[0];
item_size = btrfs_item_size_nr(leaf, path->slots[0]);
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index af1d060..5b4ea5f 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -591,6 +591,7 @@
}
compressed = test_bit(EXTENT_FLAG_COMPRESSED, &em->flags);
clear_bit(EXTENT_FLAG_PINNED, &em->flags);
+ clear_bit(EXTENT_FLAG_LOGGING, &flags);
remove_extent_mapping(em_tree, em);
if (no_splits)
goto next;
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index d1470ad..ca1b767 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2312,6 +2312,7 @@
key.type = BTRFS_EXTENT_DATA_KEY;
key.offset = start;
+ path->leave_spinning = 1;
if (merge) {
struct btrfs_file_extent_item *fi;
u64 extent_len;
@@ -2368,6 +2369,7 @@
btrfs_mark_buffer_dirty(leaf);
inode_add_bytes(inode, len);
+ btrfs_release_path(path);
ret = btrfs_inc_extent_ref(trans, root, new->bytenr,
new->disk_len, 0,
@@ -2381,6 +2383,7 @@
ret = 1;
out_free_path:
btrfs_release_path(path);
+ path->leave_spinning = 0;
btrfs_end_transaction(trans, root);
out_unlock:
unlock_extent_cached(&BTRFS_I(inode)->io_tree, lock_start, lock_end,
diff --git a/fs/btrfs/locking.h b/fs/btrfs/locking.h
index ca52681..b81e0e9 100644
--- a/fs/btrfs/locking.h
+++ b/fs/btrfs/locking.h
@@ -26,7 +26,6 @@
void btrfs_tree_lock(struct extent_buffer *eb);
void btrfs_tree_unlock(struct extent_buffer *eb);
-int btrfs_try_spin_lock(struct extent_buffer *eb);
void btrfs_tree_read_lock(struct extent_buffer *eb);
void btrfs_tree_read_unlock(struct extent_buffer *eb);
diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index aee4b1c..5471e47 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -1525,21 +1525,23 @@
if ((qg->lim_flags & BTRFS_QGROUP_LIMIT_MAX_RFER) &&
qg->reserved + qg->rfer + num_bytes >
- qg->max_rfer)
+ qg->max_rfer) {
ret = -EDQUOT;
+ goto out;
+ }
if ((qg->lim_flags & BTRFS_QGROUP_LIMIT_MAX_EXCL) &&
qg->reserved + qg->excl + num_bytes >
- qg->max_excl)
+ qg->max_excl) {
ret = -EDQUOT;
+ goto out;
+ }
list_for_each_entry(glist, &qg->groups, next_group) {
ulist_add(ulist, glist->group->qgroupid,
(uintptr_t)glist->group, GFP_ATOMIC);
}
}
- if (ret)
- goto out;
/*
* no limits exceeded, now record the reservation into all qgroups
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 9250b9c..50767bb 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -625,14 +625,13 @@
btrfs_trans_release_metadata(trans, root);
trans->block_rsv = NULL;
- /*
- * the same root has to be passed to start_transaction and
- * end_transaction. Subvolume quota depends on this.
- */
- WARN_ON(trans->root != root);
if (trans->qgroup_reserved) {
- btrfs_qgroup_free(root, trans->qgroup_reserved);
+ /*
+ * the same root has to be passed here between start_transaction
+ * and end_transaction. Subvolume quota depends on this.
+ */
+ btrfs_qgroup_free(trans->root, trans->qgroup_reserved);
trans->qgroup_reserved = 0;
}
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 6b9cff4..5989a92 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -684,6 +684,12 @@
__btrfs_close_devices(fs_devices);
free_fs_devices(fs_devices);
}
+ /*
+ * Wait for rcu kworkers under __btrfs_close_devices
+ * to finish all blkdev_puts so device is really
+ * free when umount is done.
+ */
+ rcu_barrier();
return ret;
}
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 1a052c0..3cf8a15 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -777,6 +777,7 @@
.kill_sb = cifs_kill_sb,
/* .fs_flags */
};
+MODULE_ALIAS_FS("cifs");
const struct inode_operations cifs_dir_inode_ops = {
.create = cifs_create,
.atomic_open = cifs_atomic_open,
diff --git a/fs/compat.c b/fs/compat.c
index fe40fde..d487985 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -558,6 +558,10 @@
}
*ret_pointer = iov;
+ ret = -EFAULT;
+ if (!access_ok(VERIFY_READ, uvector, nr_segs*sizeof(*uvector)))
+ goto out;
+
/*
* Single unix specification:
* We should -EINVAL if an element length is not >= 0 and fitting an
@@ -1080,17 +1084,12 @@
if (!file->f_op)
goto out;
- ret = -EFAULT;
- if (!access_ok(VERIFY_READ, uvector, nr_segs*sizeof(*uvector)))
- goto out;
-
- tot_len = compat_rw_copy_check_uvector(type, uvector, nr_segs,
+ ret = compat_rw_copy_check_uvector(type, uvector, nr_segs,
UIO_FASTIOV, iovstack, &iov);
- if (tot_len == 0) {
- ret = 0;
+ if (ret <= 0)
goto out;
- }
+ tot_len = ret;
ret = rw_verify_area(type, file, pos, tot_len);
if (ret < 0)
goto out;
diff --git a/fs/ext2/ialloc.c b/fs/ext2/ialloc.c
index 8f370e01..7cadd82 100644
--- a/fs/ext2/ialloc.c
+++ b/fs/ext2/ialloc.c
@@ -118,7 +118,6 @@
* as writing the quota to disk may need the lock as well.
*/
/* Quota is already initialized in iput() */
- ext2_xattr_delete_inode(inode);
dquot_free_inode(inode);
dquot_drop(inode);
diff --git a/fs/ext2/inode.c b/fs/ext2/inode.c
index c3881e5..fe60cc1 100644
--- a/fs/ext2/inode.c
+++ b/fs/ext2/inode.c
@@ -34,6 +34,7 @@
#include "ext2.h"
#include "acl.h"
#include "xip.h"
+#include "xattr.h"
static int __ext2_write_inode(struct inode *inode, int do_sync);
@@ -88,6 +89,7 @@
inode->i_size = 0;
if (inode->i_blocks)
ext2_truncate_blocks(inode, 0);
+ ext2_xattr_delete_inode(inode);
}
invalidate_inode_buffers(inode);
diff --git a/fs/ext3/super.c b/fs/ext3/super.c
index 1d6e2ed..fb5120a 100644
--- a/fs/ext3/super.c
+++ b/fs/ext3/super.c
@@ -353,7 +353,7 @@
return bdev;
fail:
- ext3_msg(sb, "error: failed to open journal device %s: %ld",
+ ext3_msg(sb, KERN_ERR, "error: failed to open journal device %s: %ld",
__bdevname(dev, b), PTR_ERR(bdev));
return NULL;
@@ -887,7 +887,7 @@
/*todo: use simple_strtoll with >32bit ext3 */
sb_block = simple_strtoul(options, &options, 0);
if (*options && *options != ',') {
- ext3_msg(sb, "error: invalid sb specification: %s",
+ ext3_msg(sb, KERN_ERR, "error: invalid sb specification: %s",
(char *) *data);
return 1;
}
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 34e8552..b3818b4 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -91,6 +91,7 @@
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS_FS("ext2");
+MODULE_ALIAS("ext2");
#define IS_EXT2_SB(sb) ((sb)->s_bdev->bd_holder == &ext2_fs_type)
#else
#define IS_EXT2_SB(sb) (0)
@@ -106,6 +107,7 @@
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS_FS("ext3");
+MODULE_ALIAS("ext3");
#define IS_EXT3_SB(sb) ((sb)->s_bdev->bd_holder == &ext3_fs_type)
#else
#define IS_EXT3_SB(sb) (0)
diff --git a/fs/freevxfs/vxfs_super.c b/fs/freevxfs/vxfs_super.c
index 4550743..e37eb27 100644
--- a/fs/freevxfs/vxfs_super.c
+++ b/fs/freevxfs/vxfs_super.c
@@ -258,6 +258,7 @@
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS_FS("vxfs"); /* makes mount -t vxfs autoload the module */
+MODULE_ALIAS("vxfs");
static int __init
vxfs_init(void)
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 178b90c..0f6e52d 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -986,6 +986,7 @@
.kill_sb = hostfs_kill_sb,
.fs_flags = 0,
};
+MODULE_ALIAS_FS("hostfs");
static int __init init_hostfs(void)
{
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index a307622..a0617e7 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -688,6 +688,7 @@
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV,
};
+MODULE_ALIAS_FS("hpfs");
static int __init init_hpfs_fs(void)
{
diff --git a/fs/isofs/inode.c b/fs/isofs/inode.c
index a67f16e..d9b8aeb 100644
--- a/fs/isofs/inode.c
+++ b/fs/isofs/inode.c
@@ -1557,6 +1557,7 @@
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS_FS("iso9660");
+MODULE_ALIAS("iso9660");
static int __init init_iso9660_fs(void)
{
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 95cdcb2..2f8a29d 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -335,6 +335,7 @@
.fs_flags = FS_RENAME_DOES_D_MOVE|FS_BINARY_MOUNTDATA,
};
MODULE_ALIAS_FS("nfs4");
+MODULE_ALIAS("nfs4");
EXPORT_SYMBOL_GPL(nfs4_fs_type);
static int __init register_nfs4_fs(void)
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 16d39c6..2e27430 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -230,37 +230,6 @@
__nfs4_file_put_access(fp, oflag);
}
-static inline int get_new_stid(struct nfs4_stid *stid)
-{
- static int min_stateid = 0;
- struct idr *stateids = &stid->sc_client->cl_stateids;
- int new_stid;
- int error;
-
- error = idr_get_new_above(stateids, stid, min_stateid, &new_stid);
- /*
- * Note: the necessary preallocation was done in
- * nfs4_alloc_stateid(). The idr code caps the number of
- * preallocations that can exist at a time, but the state lock
- * prevents anyone from using ours before we get here:
- */
- WARN_ON_ONCE(error);
- /*
- * It shouldn't be a problem to reuse an opaque stateid value.
- * I don't think it is for 4.1. But with 4.0 I worry that, for
- * example, a stray write retransmission could be accepted by
- * the server when it should have been rejected. Therefore,
- * adopt a trick from the sctp code to attempt to maximize the
- * amount of time until an id is reused, by ensuring they always
- * "increase" (mod INT_MAX):
- */
-
- min_stateid = new_stid+1;
- if (min_stateid == INT_MAX)
- min_stateid = 0;
- return new_stid;
-}
-
static struct nfs4_stid *nfs4_alloc_stid(struct nfs4_client *cl, struct
kmem_cache *slab)
{
@@ -273,9 +242,8 @@
if (!stid)
return NULL;
- if (!idr_pre_get(stateids, GFP_KERNEL))
- goto out_free;
- if (idr_get_new_above(stateids, stid, min_stateid, &new_id))
+ new_id = idr_alloc(stateids, stid, min_stateid, 0, GFP_KERNEL);
+ if (new_id < 0)
goto out_free;
stid->sc_client = cl;
stid->sc_type = 0;
diff --git a/fs/pipe.c b/fs/pipe.c
index 64a494c..2234f3f 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -863,6 +863,9 @@
{
int ret = -ENOENT;
+ if (!(filp->f_mode & (FMODE_READ|FMODE_WRITE)))
+ return -EINVAL;
+
mutex_lock(&inode->i_mutex);
if (inode->i_pipe) {
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 05ae3c9..3e64169 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -1439,8 +1439,11 @@
* did a write before quota was turned on
*/
rsv = inode_get_rsv_space(inode);
- if (unlikely(rsv))
+ if (unlikely(rsv)) {
+ spin_lock(&dq_data_lock);
dquot_resv_space(inode->i_dquot[cnt], rsv);
+ spin_unlock(&dq_data_lock);
+ }
}
}
out_err:
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 194113b..f8a23c3 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -1147,8 +1147,7 @@
"on filesystem root.");
return 0;
}
- qf_names[qtype] =
- kmalloc(strlen(arg) + 1, GFP_KERNEL);
+ qf_names[qtype] = kstrdup(arg, GFP_KERNEL);
if (!qf_names[qtype]) {
reiserfs_warning(s, "reiserfs-2502",
"not enough memory "
@@ -1156,7 +1155,6 @@
"quotafile name.");
return 0;
}
- strcpy(qf_names[qtype], arg);
if (qtype == USRQUOTA)
*mount_options |= 1 << REISERFS_USRQUOTA;
else
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 260e392..60553a9 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -489,6 +489,7 @@
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV
};
+MODULE_ALIAS_FS("squashfs");
static const struct super_operations squashfs_super_ops = {
.alloc_inode = squashfs_alloc_inode,
diff --git a/fs/sysv/super.c b/fs/sysv/super.c
index a39938b..d0c6a00 100644
--- a/fs/sysv/super.c
+++ b/fs/sysv/super.c
@@ -555,6 +555,7 @@
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS_FS("v7");
+MODULE_ALIAS("v7");
static int __init init_sysv_fs(void)
{
diff --git a/fs/udf/super.c b/fs/udf/super.c
index bc5b30a..9ac4057 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -118,6 +118,7 @@
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV,
};
+MODULE_ALIAS_FS("udf");
static struct kmem_cache *udf_inode_cachep;
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 555d033..b327b5a 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -235,6 +235,9 @@
if a _PPC object exists, rmmod is disallowed then */
int acpi_processor_notify_smm(struct module *calling_module);
+/* parsing the _P* objects. */
+extern int acpi_processor_get_performance_info(struct acpi_processor *pr);
+
/* for communication between multiple parts of the processor kernel module */
DECLARE_PER_CPU(struct acpi_processor *, processors);
extern struct acpi_processor_errata errata;
diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h
index 1ced641..33bd2de 100644
--- a/include/asm-generic/atomic.h
+++ b/include/asm-generic/atomic.h
@@ -136,12 +136,6 @@
#define atomic_xchg(ptr, v) (xchg(&(ptr)->counter, (v)))
#define atomic_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), (old), (new)))
-#define cmpxchg_local(ptr, o, n) \
- ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
- (unsigned long)(n), sizeof(*(ptr))))
-
-#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
-
static inline int __atomic_add_unless(atomic_t *v, int a, int u)
{
int c, old;
diff --git a/include/asm-generic/cmpxchg.h b/include/asm-generic/cmpxchg.h
index 1488302..811fb1e 100644
--- a/include/asm-generic/cmpxchg.h
+++ b/include/asm-generic/cmpxchg.h
@@ -92,6 +92,16 @@
*/
#include <asm-generic/cmpxchg-local.h>
+#ifndef cmpxchg_local
+#define cmpxchg_local(ptr, o, n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+ (unsigned long)(n), sizeof(*(ptr))))
+#endif
+
+#ifndef cmpxchg64_local
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+#endif
+
#define cmpxchg(ptr, o, n) cmpxchg_local((ptr), (o), (n))
#define cmpxchg64(ptr, o, n) cmpxchg64_local((ptr), (o), (n))
diff --git a/include/linux/idr.h b/include/linux/idr.h
index a6f38b5..2640c7e 100644
--- a/include/linux/idr.h
+++ b/include/linux/idr.h
@@ -73,8 +73,6 @@
*/
void *idr_find_slowpath(struct idr *idp, int id);
-int idr_pre_get(struct idr *idp, gfp_t gfp_mask);
-int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
void idr_preload(gfp_t gfp_mask);
int idr_alloc(struct idr *idp, void *ptr, int start, int end, gfp_t gfp_mask);
int idr_for_each(struct idr *idp,
@@ -99,7 +97,7 @@
/**
* idr_find - return pointer for given id
- * @idp: idr handle
+ * @idr: idr handle
* @id: lookup key
*
* Return the pointer given the id it has been registered with. A %NULL
@@ -120,19 +118,6 @@
}
/**
- * idr_get_new - allocate new idr entry
- * @idp: idr handle
- * @ptr: pointer you want associated with the id
- * @id: pointer to the allocated handle
- *
- * Simple wrapper around idr_get_new_above() w/ @starting_id of zero.
- */
-static inline int idr_get_new(struct idr *idp, void *ptr, int *id)
-{
- return idr_get_new_above(idp, ptr, 0, id);
-}
-
-/**
* idr_for_each_entry - iterate over an idr's elements of a given type
* @idp: idr handle
* @entry: the type * to use as cursor
@@ -143,7 +128,56 @@
entry != NULL; \
++id, entry = (typeof(entry))idr_get_next((idp), &(id)))
-void __idr_remove_all(struct idr *idp); /* don't use */
+/*
+ * Don't use the following functions. These exist only to suppress
+ * deprecated warnings on EXPORT_SYMBOL()s.
+ */
+int __idr_pre_get(struct idr *idp, gfp_t gfp_mask);
+int __idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id);
+void __idr_remove_all(struct idr *idp);
+
+/**
+ * idr_pre_get - reserve resources for idr allocation
+ * @idp: idr handle
+ * @gfp_mask: memory allocation flags
+ *
+ * Part of old alloc interface. This is going away. Use
+ * idr_preload[_end]() and idr_alloc() instead.
+ */
+static inline int __deprecated idr_pre_get(struct idr *idp, gfp_t gfp_mask)
+{
+ return __idr_pre_get(idp, gfp_mask);
+}
+
+/**
+ * idr_get_new_above - allocate new idr entry above or equal to a start id
+ * @idp: idr handle
+ * @ptr: pointer you want associated with the id
+ * @starting_id: id to start search at
+ * @id: pointer to the allocated handle
+ *
+ * Part of old alloc interface. This is going away. Use
+ * idr_preload[_end]() and idr_alloc() instead.
+ */
+static inline int __deprecated idr_get_new_above(struct idr *idp, void *ptr,
+ int starting_id, int *id)
+{
+ return __idr_get_new_above(idp, ptr, starting_id, id);
+}
+
+/**
+ * idr_get_new - allocate new idr entry
+ * @idp: idr handle
+ * @ptr: pointer you want associated with the id
+ * @id: pointer to the allocated handle
+ *
+ * Part of old alloc interface. This is going away. Use
+ * idr_preload[_end]() and idr_alloc() instead.
+ */
+static inline int __deprecated idr_get_new(struct idr *idp, void *ptr, int *id)
+{
+ return __idr_get_new_above(idp, ptr, 0, id);
+}
/**
* idr_remove_all - remove all ids from the given idr tree
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index 1f86a97..8bd12be 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -227,14 +227,17 @@
};
#ifdef CONFIG_IIO_BUFFER
+irqreturn_t st_sensors_trigger_handler(int irq, void *p);
+
+int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf);
+#endif
+
+#ifdef CONFIG_IIO_TRIGGER
int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
const struct iio_trigger_ops *trigger_ops);
void st_sensors_deallocate_trigger(struct iio_dev *indio_dev);
-irqreturn_t st_sensors_trigger_handler(int irq, void *p);
-
-int st_sensors_get_buffer_element(struct iio_dev *indio_dev, u8 *buf);
#else
static inline int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
const struct iio_trigger_ops *trigger_ops)
diff --git a/include/linux/list.h b/include/linux/list.h
index d991cc1..6a1f8df 100644
--- a/include/linux/list.h
+++ b/include/linux/list.h
@@ -667,7 +667,9 @@
pos = n)
#define hlist_entry_safe(ptr, type, member) \
- (ptr) ? hlist_entry(ptr, type, member) : NULL
+ ({ typeof(ptr) ____ptr = (ptr); \
+ ____ptr ? hlist_entry(____ptr, type, member) : NULL; \
+ })
/**
* hlist_for_each_entry - iterate over list of given type
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index a4d13d7..3bbda22 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -221,6 +221,7 @@
};
struct palmas_platform_data {
+ int irq_flags;
int gpio_base;
/* bit value to be loaded to the POWER_CTRL register */
diff --git a/include/linux/mfd/tps65912.h b/include/linux/mfd/tps65912.h
index aaceab4..6d30903 100644
--- a/include/linux/mfd/tps65912.h
+++ b/include/linux/mfd/tps65912.h
@@ -323,5 +323,6 @@
void tps65912_device_exit(struct tps65912 *tps65912);
int tps65912_irq_init(struct tps65912 *tps65912, int irq,
struct tps65912_platform_data *pdata);
+int tps65912_irq_exit(struct tps65912 *tps65912);
#endif /* __LINUX_MFD_TPS65912_H */
diff --git a/include/linux/mfd/wm831x/auxadc.h b/include/linux/mfd/wm831x/auxadc.h
index b132067..867aa23 100644
--- a/include/linux/mfd/wm831x/auxadc.h
+++ b/include/linux/mfd/wm831x/auxadc.h
@@ -15,6 +15,8 @@
#ifndef __MFD_WM831X_AUXADC_H__
#define __MFD_WM831X_AUXADC_H__
+struct wm831x;
+
/*
* R16429 (0x402D) - AuxADC Data
*/
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h
index 4a3b83a..76c2264 100644
--- a/include/linux/mfd/wm831x/core.h
+++ b/include/linux/mfd/wm831x/core.h
@@ -20,6 +20,7 @@
#include <linux/irqdomain.h>
#include <linux/list.h>
#include <linux/regmap.h>
+#include <linux/mfd/wm831x/auxadc.h>
/*
* Register values.
@@ -355,7 +356,6 @@
};
struct wm831x;
-enum wm831x_auxadc;
typedef int (*wm831x_auxadc_read_fn)(struct wm831x *wm831x,
enum wm831x_auxadc input);
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 7ccb3c5..ef52d9c 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -187,6 +187,13 @@
* This happens with the Renesas AG-AND chips, possibly others.
*/
#define BBT_AUTO_REFRESH 0x00000080
+/*
+ * Chip requires ready check on read (for auto-incremented sequential read).
+ * True only for small page devices; large page devices do not support
+ * autoincrement.
+ */
+#define NAND_NEED_READRDY 0x00000100
+
/* Chip does not allow subpage writes */
#define NAND_NO_SUBPAGE_WRITE 0x00000200
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index e47ee46..1d795df 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -799,6 +799,12 @@
static inline void perf_event_task_tick(void) { }
#endif
+#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_CPU_SUP_INTEL)
+extern void perf_restore_debug_store(void);
+#else
+static inline void perf_restore_debug_store(void) { }
+#endif
+
#define perf_output_put(handle, x) perf_output_copy((handle), &(x), sizeof(x))
/*
diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index 5ae8456..c230994 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -14,6 +14,7 @@
*/
#include <linux/cgroup.h>
+#include <linux/errno.h>
/*
* The core object. the cgroup that wishes to account for some
diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h
index 3c671c1..8860594 100644
--- a/include/linux/usb/composite.h
+++ b/include/linux/usb/composite.h
@@ -60,7 +60,7 @@
* @name: For diagnostics, identifies the function.
* @strings: tables of strings, keyed by identifiers assigned during bind()
* and by language IDs provided in control requests
- * @descriptors: Table of full (or low) speed descriptors, using interface and
+ * @fs_descriptors: Table of full (or low) speed descriptors, using interface and
* string identifiers assigned during @bind(). If this pointer is null,
* the function will not be available at full speed (or at low speed).
* @hs_descriptors: Table of high speed descriptors, using interface and
@@ -290,6 +290,7 @@
* after function notifications
* @resume: Notifies configuration when the host restarts USB traffic,
* before function notifications
+ * @gadget_driver: Gadget driver controlling this driver
*
* Devices default to reporting self powered operation. Devices which rely
* on bus powered operation should report this in their @bind method.
diff --git a/include/uapi/linux/acct.h b/include/uapi/linux/acct.h
index 11b6ca3..df2f9a0 100644
--- a/include/uapi/linux/acct.h
+++ b/include/uapi/linux/acct.h
@@ -107,10 +107,12 @@
#define ACORE 0x08 /* ... dumped core */
#define AXSIG 0x10 /* ... was killed by a signal */
-#ifdef __BIG_ENDIAN
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
#define ACCT_BYTEORDER 0x80 /* accounting file is big endian */
-#else
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
#define ACCT_BYTEORDER 0x00 /* accounting file is little endian */
+#else
+#error unspecified endianness
#endif
#ifndef __KERNEL__
diff --git a/include/uapi/linux/aio_abi.h b/include/uapi/linux/aio_abi.h
index 86fa7a7..bb2554f 100644
--- a/include/uapi/linux/aio_abi.h
+++ b/include/uapi/linux/aio_abi.h
@@ -62,9 +62,9 @@
__s64 res2; /* secondary result */
};
-#if defined(__LITTLE_ENDIAN)
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
#define PADDED(x,y) x, y
-#elif defined(__BIG_ENDIAN)
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
#define PADDED(x,y) y, x
#else
#error edit for your odd byteorder.
diff --git a/include/uapi/linux/raid/md_p.h b/include/uapi/linux/raid/md_p.h
index ee75353..fe1a540 100644
--- a/include/uapi/linux/raid/md_p.h
+++ b/include/uapi/linux/raid/md_p.h
@@ -145,16 +145,18 @@
__u32 failed_disks; /* 4 Number of failed disks */
__u32 spare_disks; /* 5 Number of spare disks */
__u32 sb_csum; /* 6 checksum of the whole superblock */
-#ifdef __BIG_ENDIAN
+#if defined(__BYTE_ORDER) ? __BYTE_ORDER == __BIG_ENDIAN : defined(__BIG_ENDIAN)
__u32 events_hi; /* 7 high-order of superblock update count */
__u32 events_lo; /* 8 low-order of superblock update count */
__u32 cp_events_hi; /* 9 high-order of checkpoint update count */
__u32 cp_events_lo; /* 10 low-order of checkpoint update count */
-#else
+#elif defined(__BYTE_ORDER) ? __BYTE_ORDER == __LITTLE_ENDIAN : defined(__LITTLE_ENDIAN)
__u32 events_lo; /* 7 low-order of superblock update count */
__u32 events_hi; /* 8 high-order of superblock update count */
__u32 cp_events_lo; /* 9 low-order of checkpoint update count */
__u32 cp_events_hi; /* 10 high-order of checkpoint update count */
+#else
+#error unspecified endianness
#endif
__u32 recovery_cp; /* 11 recovery checkpoint sector count */
/* There are only valid for minor_version > 90 */
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index b6a23a4..74c2bf7 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -51,7 +51,10 @@
#define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */
#define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */
#define PORT_BRCM_TRUMANAGE 25
-#define PORT_MAX_8250 25 /* max port ID */
+#define PORT_ALTR_16550_F32 26 /* Altera 16550 UART with 32 FIFOs */
+#define PORT_ALTR_16550_F64 27 /* Altera 16550 UART with 64 FIFOs */
+#define PORT_ALTR_16550_F128 28 /* Altera 16550 UART with 128 FIFOs */
+#define PORT_MAX_8250 28 /* max port ID */
/*
* ARM specific type numbers. These are not currently guaranteed
diff --git a/include/video/atmel_lcdc.h b/include/video/atmel_lcdc.h
index 28447f1..8deb226 100644
--- a/include/video/atmel_lcdc.h
+++ b/include/video/atmel_lcdc.h
@@ -30,7 +30,6 @@
*/
#define ATMEL_LCDC_WIRING_BGR 0
#define ATMEL_LCDC_WIRING_RGB 1
-#define ATMEL_LCDC_WIRING_RGB555 2
/* LCD Controller info data structure, stored in device platform_data */
@@ -62,6 +61,7 @@
void (*atmel_lcdfb_power_control)(int on);
struct fb_monspecs *default_monspecs;
u32 pseudo_palette[16];
+ bool have_intensity_bit;
};
#define ATMEL_LCDC_DMABADDR1 0x00
diff --git a/init/Kconfig b/init/Kconfig
index 22616cd..5341d72 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -28,10 +28,6 @@
menu "General setup"
-config EXPERIMENTAL
- bool
- default y
-
config BROKEN
bool
diff --git a/kernel/fork.c b/kernel/fork.c
index 8d932b1..1766d32 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1141,6 +1141,9 @@
if ((clone_flags & (CLONE_NEWNS|CLONE_FS)) == (CLONE_NEWNS|CLONE_FS))
return ERR_PTR(-EINVAL);
+ if ((clone_flags & (CLONE_NEWUSER|CLONE_FS)) == (CLONE_NEWUSER|CLONE_FS))
+ return ERR_PTR(-EINVAL);
+
/*
* Thread groups must share signals as well, and detached threads
* can only be started up within the thread group.
@@ -1807,7 +1810,7 @@
* If unsharing a user namespace must also unshare the thread.
*/
if (unshare_flags & CLONE_NEWUSER)
- unshare_flags |= CLONE_THREAD;
+ unshare_flags |= CLONE_THREAD | CLONE_FS;
/*
* If unsharing a pid namespace must also unshare the thread.
*/
diff --git a/kernel/futex.c b/kernel/futex.c
index f0090a9..b26dcfc 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -223,7 +223,8 @@
* @rw: mapping needs to be read/write (values: VERIFY_READ,
* VERIFY_WRITE)
*
- * Returns a negative error code or 0
+ * Return: a negative error code or 0
+ *
* The key words are stored in *key on success.
*
* For shared mappings, it's (page->index, file_inode(vma->vm_file),
@@ -705,9 +706,9 @@
* be "current" except in the case of requeue pi.
* @set_waiters: force setting the FUTEX_WAITERS bit (1) or not (0)
*
- * Returns:
- * 0 - ready to wait
- * 1 - acquired the lock
+ * Return:
+ * 0 - ready to wait;
+ * 1 - acquired the lock;
* <0 - error
*
* The hb->lock and futex_key refs shall be held by the caller.
@@ -1191,9 +1192,9 @@
* then direct futex_lock_pi_atomic() to force setting the FUTEX_WAITERS bit.
* hb1 and hb2 must be held by the caller.
*
- * Returns:
- * 0 - failed to acquire the lock atomicly
- * 1 - acquired the lock
+ * Return:
+ * 0 - failed to acquire the lock atomically;
+ * 1 - acquired the lock;
* <0 - error
*/
static int futex_proxy_trylock_atomic(u32 __user *pifutex,
@@ -1254,8 +1255,8 @@
* Requeue waiters on uaddr1 to uaddr2. In the requeue_pi case, try to acquire
* uaddr2 atomically on behalf of the top waiter.
*
- * Returns:
- * >=0 - on success, the number of tasks requeued or woken
+ * Return:
+ * >=0 - on success, the number of tasks requeued or woken;
* <0 - on error
*/
static int futex_requeue(u32 __user *uaddr1, unsigned int flags,
@@ -1536,8 +1537,8 @@
* The q->lock_ptr must not be held by the caller. A call to unqueue_me() must
* be paired with exactly one earlier call to queue_me().
*
- * Returns:
- * 1 - if the futex_q was still queued (and we removed unqueued it)
+ * Return:
+ * 1 - if the futex_q was still queued (and we removed unqueued it);
* 0 - if the futex_q was already removed by the waking thread
*/
static int unqueue_me(struct futex_q *q)
@@ -1707,9 +1708,9 @@
* the pi_state owner as well as handle race conditions that may allow us to
* acquire the lock. Must be called with the hb lock held.
*
- * Returns:
- * 1 - success, lock taken
- * 0 - success, lock not taken
+ * Return:
+ * 1 - success, lock taken;
+ * 0 - success, lock not taken;
* <0 - on error (-EFAULT)
*/
static int fixup_owner(u32 __user *uaddr, struct futex_q *q, int locked)
@@ -1824,8 +1825,8 @@
* Return with the hb lock held and a q.key reference on success, and unlocked
* with no q.key reference on failure.
*
- * Returns:
- * 0 - uaddr contains val and hb has been locked
+ * Return:
+ * 0 - uaddr contains val and hb has been locked;
* <1 - -EFAULT or -EWOULDBLOCK (uaddr does not contain val) and hb is unlocked
*/
static int futex_wait_setup(u32 __user *uaddr, u32 val, unsigned int flags,
@@ -2203,9 +2204,9 @@
* the wakeup and return the appropriate error code to the caller. Must be
* called with the hb lock held.
*
- * Returns
- * 0 - no early wakeup detected
- * <0 - -ETIMEDOUT or -ERESTARTNOINTR
+ * Return:
+ * 0 = no early wakeup detected;
+ * <0 = -ETIMEDOUT or -ERESTARTNOINTR
*/
static inline
int handle_early_requeue_pi_wakeup(struct futex_hash_bucket *hb,
@@ -2247,7 +2248,6 @@
* @val: the expected value of uaddr
* @abs_time: absolute timeout
* @bitset: 32 bit wakeup bitset set by userspace, defaults to all
- * @clockrt: whether to use CLOCK_REALTIME (1) or CLOCK_MONOTONIC (0)
* @uaddr2: the pi futex we will take prior to returning to user-space
*
* The caller will wait on uaddr and will be requeued by futex_requeue() to
@@ -2258,7 +2258,7 @@
* there was a need to.
*
* We call schedule in futex_wait_queue_me() when we enqueue and return there
- * via the following:
+ * via the following--
* 1) wakeup on uaddr2 after an atomic lock acquisition by futex_requeue()
* 2) wakeup on uaddr2 after a requeue
* 3) signal
@@ -2276,8 +2276,8 @@
*
* If 4 or 7, we cleanup and return with -ETIMEDOUT.
*
- * Returns:
- * 0 - On success
+ * Return:
+ * 0 - On success;
* <0 - On error
*/
static int futex_wait_requeue_pi(u32 __user *uaddr, unsigned int flags,
diff --git a/kernel/signal.c b/kernel/signal.c
index 2ec870a..dd72567 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -485,6 +485,9 @@
if (force_default || ka->sa.sa_handler != SIG_IGN)
ka->sa.sa_handler = SIG_DFL;
ka->sa.sa_flags = 0;
+#ifdef __ARCH_HAS_SA_RESTORER
+ ka->sa.sa_restorer = NULL;
+#endif
sigemptyset(&ka->sa.sa_mask);
ka++;
}
@@ -2682,7 +2685,7 @@
/**
* sys_rt_sigpending - examine a pending signal that has been raised
* while blocked
- * @set: stores pending signals
+ * @uset: stores pending signals
* @sigsetsize: size of sigset_t type or larger
*/
SYSCALL_DEFINE2(rt_sigpending, sigset_t __user *, uset, size_t, sigsetsize)
diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
index 8b65083..b14f4d3 100644
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -21,6 +21,7 @@
#include <linux/uaccess.h>
#include <linux/ctype.h>
#include <linux/projid.h>
+#include <linux/fs_struct.h>
static struct kmem_cache *user_ns_cachep __read_mostly;
@@ -837,6 +838,9 @@
if (atomic_read(¤t->mm->mm_users) > 1)
return -EINVAL;
+ if (current->fs->users != 1)
+ return -EINVAL;
+
if (!ns_capable(user_ns, CAP_SYS_ADMIN))
return -EPERM;
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 81f2457..b48cd59 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -457,11 +457,12 @@
int ret;
mutex_lock(&worker_pool_idr_mutex);
- idr_pre_get(&worker_pool_idr, GFP_KERNEL);
- ret = idr_get_new(&worker_pool_idr, pool, &pool->id);
+ ret = idr_alloc(&worker_pool_idr, pool, 0, 0, GFP_KERNEL);
+ if (ret >= 0)
+ pool->id = ret;
mutex_unlock(&worker_pool_idr_mutex);
- return ret;
+ return ret < 0 ? ret : 0;
}
/*
@@ -3446,28 +3447,34 @@
spin_unlock_irq(&pool->lock);
mutex_unlock(&pool->assoc_mutex);
- }
- /*
- * Call schedule() so that we cross rq->lock and thus can guarantee
- * sched callbacks see the %WORKER_UNBOUND flag. This is necessary
- * as scheduler callbacks may be invoked from other cpus.
- */
- schedule();
+ /*
+ * Call schedule() so that we cross rq->lock and thus can
+ * guarantee sched callbacks see the %WORKER_UNBOUND flag.
+ * This is necessary as scheduler callbacks may be invoked
+ * from other cpus.
+ */
+ schedule();
- /*
- * Sched callbacks are disabled now. Zap nr_running. After this,
- * nr_running stays zero and need_more_worker() and keep_working()
- * are always true as long as the worklist is not empty. Pools on
- * @cpu now behave as unbound (in terms of concurrency management)
- * pools which are served by workers tied to the CPU.
- *
- * On return from this function, the current worker would trigger
- * unbound chain execution of pending work items if other workers
- * didn't already.
- */
- for_each_std_worker_pool(pool, cpu)
+ /*
+ * Sched callbacks are disabled now. Zap nr_running.
+ * After this, nr_running stays zero and need_more_worker()
+ * and keep_working() are always true as long as the
+ * worklist is not empty. This pool now behaves as an
+ * unbound (in terms of concurrency management) pool which
+ * are served by workers tied to the pool.
+ */
atomic_set(&pool->nr_running, 0);
+
+ /*
+ * With concurrency management just turned off, a busy
+ * worker blocking could lead to lengthy stalls. Kick off
+ * unbound chain execution of currently pending work items.
+ */
+ spin_lock_irq(&pool->lock);
+ wake_up_worker(pool);
+ spin_unlock_irq(&pool->lock);
+ }
}
/*
diff --git a/lib/idr.c b/lib/idr.c
index 00739aa..322e281 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -106,8 +106,14 @@
if (layer_idr)
return get_from_free_list(layer_idr);
- /* try to allocate directly from kmem_cache */
- new = kmem_cache_zalloc(idr_layer_cache, gfp_mask);
+ /*
+ * Try to allocate directly from kmem_cache. We want to try this
+ * before preload buffer; otherwise, non-preloading idr_alloc()
+ * users will end up taking advantage of preloading ones. As the
+ * following is allowed to fail for preloaded cases, suppress
+ * warning this time.
+ */
+ new = kmem_cache_zalloc(idr_layer_cache, gfp_mask | __GFP_NOWARN);
if (new)
return new;
@@ -115,18 +121,24 @@
* Try to fetch one from the per-cpu preload buffer if in process
* context. See idr_preload() for details.
*/
- if (in_interrupt())
- return NULL;
-
- preempt_disable();
- new = __this_cpu_read(idr_preload_head);
- if (new) {
- __this_cpu_write(idr_preload_head, new->ary[0]);
- __this_cpu_dec(idr_preload_cnt);
- new->ary[0] = NULL;
+ if (!in_interrupt()) {
+ preempt_disable();
+ new = __this_cpu_read(idr_preload_head);
+ if (new) {
+ __this_cpu_write(idr_preload_head, new->ary[0]);
+ __this_cpu_dec(idr_preload_cnt);
+ new->ary[0] = NULL;
+ }
+ preempt_enable();
+ if (new)
+ return new;
}
- preempt_enable();
- return new;
+
+ /*
+ * Both failed. Try kmem_cache again w/o adding __GFP_NOWARN so
+ * that memory allocation failure warning is printed as intended.
+ */
+ return kmem_cache_zalloc(idr_layer_cache, gfp_mask);
}
static void idr_layer_rcu_free(struct rcu_head *head)
@@ -184,20 +196,7 @@
}
}
-/**
- * idr_pre_get - reserve resources for idr allocation
- * @idp: idr handle
- * @gfp_mask: memory allocation flags
- *
- * This function should be called prior to calling the idr_get_new* functions.
- * It preallocates enough memory to satisfy the worst possible allocation. The
- * caller should pass in GFP_KERNEL if possible. This of course requires that
- * no spinning locks be held.
- *
- * If the system is REALLY out of memory this function returns %0,
- * otherwise %1.
- */
-int idr_pre_get(struct idr *idp, gfp_t gfp_mask)
+int __idr_pre_get(struct idr *idp, gfp_t gfp_mask)
{
while (idp->id_free_cnt < MAX_IDR_FREE) {
struct idr_layer *new;
@@ -208,13 +207,12 @@
}
return 1;
}
-EXPORT_SYMBOL(idr_pre_get);
+EXPORT_SYMBOL(__idr_pre_get);
/**
* sub_alloc - try to allocate an id without growing the tree depth
* @idp: idr handle
* @starting_id: id to start search at
- * @id: pointer to the allocated handle
* @pa: idr_layer[MAX_IDR_LEVEL] used as backtrack buffer
* @gfp_mask: allocation mask for idr_layer_alloc()
* @layer_idr: optional idr passed to idr_layer_alloc()
@@ -376,25 +374,7 @@
idr_mark_full(pa, id);
}
-/**
- * idr_get_new_above - allocate new idr entry above or equal to a start id
- * @idp: idr handle
- * @ptr: pointer you want associated with the id
- * @starting_id: id to start search at
- * @id: pointer to the allocated handle
- *
- * This is the allocate id function. It should be called with any
- * required locks.
- *
- * If allocation from IDR's private freelist fails, idr_get_new_above() will
- * return %-EAGAIN. The caller should retry the idr_pre_get() call to refill
- * IDR's preallocation and then retry the idr_get_new_above() call.
- *
- * If the idr is full idr_get_new_above() will return %-ENOSPC.
- *
- * @id returns a value in the range @starting_id ... %0x7fffffff
- */
-int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id)
+int __idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id)
{
struct idr_layer *pa[MAX_IDR_LEVEL + 1];
int rv;
@@ -407,7 +387,7 @@
*id = rv;
return 0;
}
-EXPORT_SYMBOL(idr_get_new_above);
+EXPORT_SYMBOL(__idr_get_new_above);
/**
* idr_preload - preload for idr_alloc()
@@ -908,7 +888,7 @@
int ida_pre_get(struct ida *ida, gfp_t gfp_mask)
{
/* allocate idr_layers */
- if (!idr_pre_get(&ida->idr, gfp_mask))
+ if (!__idr_pre_get(&ida->idr, gfp_mask))
return 0;
/* allocate free_bitmap */
diff --git a/lib/xz/Kconfig b/lib/xz/Kconfig
index 82a04d7..08837db 100644
--- a/lib/xz/Kconfig
+++ b/lib/xz/Kconfig
@@ -15,7 +15,7 @@
config XZ_DEC_POWERPC
bool "PowerPC BCJ filter decoder"
- default y if POWERPC
+ default y if PPC
select XZ_DEC_BCJ
config XZ_DEC_IA64
diff --git a/mm/Kconfig b/mm/Kconfig
index ae55c1e..3bea74f 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -286,8 +286,12 @@
default "1"
config VIRT_TO_BUS
- def_bool y
- depends on HAVE_VIRT_TO_BUS
+ bool
+ help
+ An architecture should select this if it implements the
+ deprecated interface virt_to_bus(). All new architectures
+ should probably not select this.
+
config MMU_NOTIFIER
bool
diff --git a/mm/fremap.c b/mm/fremap.c
index 0cd4c1148..4723ac8 100644
--- a/mm/fremap.c
+++ b/mm/fremap.c
@@ -129,7 +129,7 @@
struct vm_area_struct *vma;
int err = -EINVAL;
int has_write_lock = 0;
- vm_flags_t vm_flags;
+ vm_flags_t vm_flags = 0;
if (prot)
return err;
@@ -254,7 +254,8 @@
*/
out:
- vm_flags = vma->vm_flags;
+ if (vma)
+ vm_flags = vma->vm_flags;
if (likely(!has_write_lock))
up_read(&mm->mmap_sem);
else
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index b81a367b..9597eec 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -1801,7 +1801,7 @@
int retry = 1;
start_pfn = PFN_DOWN(start);
- end_pfn = start_pfn + PFN_DOWN(size);
+ end_pfn = PFN_UP(start + size - 1);
/*
* When CONFIG_MEMCG is on, one memory block may be used by other
diff --git a/mm/process_vm_access.c b/mm/process_vm_access.c
index 926b466..fd26d04 100644
--- a/mm/process_vm_access.c
+++ b/mm/process_vm_access.c
@@ -429,12 +429,6 @@
if (flags != 0)
return -EINVAL;
- if (!access_ok(VERIFY_READ, lvec, liovcnt * sizeof(*lvec)))
- goto out;
-
- if (!access_ok(VERIFY_READ, rvec, riovcnt * sizeof(*rvec)))
- goto out;
-
if (vm_write)
rc = compat_rw_copy_check_uvector(WRITE, lvec, liovcnt,
UIO_FASTIOV, iovstack_l,
@@ -459,8 +453,6 @@
kfree(iov_r);
if (iov_l != iovstack_l)
kfree(iov_l);
-
-out:
return rc;
}
diff --git a/net/ceph/osdmap.c b/net/ceph/osdmap.c
index 69bc4bf..4543b9a 100644
--- a/net/ceph/osdmap.c
+++ b/net/ceph/osdmap.c
@@ -654,6 +654,24 @@
return 0;
}
+static int __decode_pgid(void **p, void *end, struct ceph_pg *pg)
+{
+ u8 v;
+
+ ceph_decode_need(p, end, 1+8+4+4, bad);
+ v = ceph_decode_8(p);
+ if (v != 1)
+ goto bad;
+ pg->pool = ceph_decode_64(p);
+ pg->seed = ceph_decode_32(p);
+ *p += 4; /* skip preferred */
+ return 0;
+
+bad:
+ dout("error decoding pgid\n");
+ return -EINVAL;
+}
+
/*
* decode a full map.
*/
@@ -745,13 +763,12 @@
for (i = 0; i < len; i++) {
int n, j;
struct ceph_pg pgid;
- struct ceph_pg_v1 pgid_v1;
struct ceph_pg_mapping *pg;
- ceph_decode_need(p, end, sizeof(u32) + sizeof(u64), bad);
- ceph_decode_copy(p, &pgid_v1, sizeof(pgid_v1));
- pgid.pool = le32_to_cpu(pgid_v1.pool);
- pgid.seed = le16_to_cpu(pgid_v1.ps);
+ err = __decode_pgid(p, end, &pgid);
+ if (err)
+ goto bad;
+ ceph_decode_need(p, end, sizeof(u32), bad);
n = ceph_decode_32(p);
err = -EINVAL;
if (n > (UINT_MAX - sizeof(*pg)) / sizeof(u32))
@@ -818,8 +835,8 @@
u16 version;
ceph_decode_16_safe(p, end, version, bad);
- if (version > 6) {
- pr_warning("got unknown v %d > %d of inc osdmap\n", version, 6);
+ if (version != 6) {
+ pr_warning("got unknown v %d != 6 of inc osdmap\n", version);
goto bad;
}
@@ -963,15 +980,14 @@
while (len--) {
struct ceph_pg_mapping *pg;
int j;
- struct ceph_pg_v1 pgid_v1;
struct ceph_pg pgid;
u32 pglen;
- ceph_decode_need(p, end, sizeof(u64) + sizeof(u32), bad);
- ceph_decode_copy(p, &pgid_v1, sizeof(pgid_v1));
- pgid.pool = le32_to_cpu(pgid_v1.pool);
- pgid.seed = le16_to_cpu(pgid_v1.ps);
- pglen = ceph_decode_32(p);
+ err = __decode_pgid(p, end, &pgid);
+ if (err)
+ goto bad;
+ ceph_decode_need(p, end, sizeof(u32), bad);
+ pglen = ceph_decode_32(p);
if (pglen) {
ceph_decode_need(p, end, pglen*sizeof(u32), bad);
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index f7d34e7..5ead605 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -447,17 +447,21 @@
else {
int N, i;
+ /*
+ * NOTE: we skip uid_valid()/gid_valid() checks here:
+ * instead, * -1 id's are later mapped to the
+ * (export-specific) anonymous id by nfsd_setuser.
+ *
+ * (But supplementary gid's get no such special
+ * treatment so are checked for validity here.)
+ */
/* uid */
rsci.cred.cr_uid = make_kuid(&init_user_ns, id);
- if (!uid_valid(rsci.cred.cr_uid))
- goto out;
/* gid */
if (get_int(&mesg, &id))
goto out;
rsci.cred.cr_gid = make_kgid(&init_user_ns, id);
- if (!gid_valid(rsci.cred.cr_gid))
- goto out;
/* number of additional gid's */
if (get_int(&mesg, &N))
diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c
index a0f48a5..a9129f8 100644
--- a/net/sunrpc/rpc_pipe.c
+++ b/net/sunrpc/rpc_pipe.c
@@ -1175,6 +1175,7 @@
.kill_sb = rpc_kill_sb,
};
MODULE_ALIAS_FS("rpc_pipefs");
+MODULE_ALIAS("rpc_pipefs");
static void
init_once(void *foo)
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index c1d8476..3d02130 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -849,6 +849,14 @@
xs_tcp_shutdown(xprt);
}
+static void xs_local_destroy(struct rpc_xprt *xprt)
+{
+ xs_close(xprt);
+ xs_free_peer_addresses(xprt);
+ xprt_free(xprt);
+ module_put(THIS_MODULE);
+}
+
/**
* xs_destroy - prepare to shutdown a transport
* @xprt: doomed transport
@@ -862,10 +870,7 @@
cancel_delayed_work_sync(&transport->connect_worker);
- xs_close(xprt);
- xs_free_peer_addresses(xprt);
- xprt_free(xprt);
- module_put(THIS_MODULE);
+ xs_local_destroy(xprt);
}
static inline struct rpc_xprt *xprt_from_sock(struct sock *sk)
@@ -2482,7 +2487,7 @@
.send_request = xs_local_send_request,
.set_retrans_timeout = xprt_set_retrans_timeout_def,
.close = xs_close,
- .destroy = xs_destroy,
+ .destroy = xs_local_destroy,
.print_stats = xs_local_print_stats,
};
diff --git a/scripts/Makefile.headersinst b/scripts/Makefile.headersinst
index 25f216a..477d137 100644
--- a/scripts/Makefile.headersinst
+++ b/scripts/Makefile.headersinst
@@ -14,7 +14,7 @@
include $(kbuild-file)
# called may set destination dir (when installing to asm/)
-_dst := $(or $(destination-y),$(dst),$(obj))
+_dst := $(if $(destination-y),$(destination-y),$(if $(dst),$(dst),$(obj)))
old-kbuild-file := $(srctree)/$(subst uapi/,,$(obj))/Kbuild
ifneq ($(wildcard $(old-kbuild-file)),)
@@ -48,13 +48,14 @@
output-files := $(addprefix $(installdir)/, $(all-files))
input-files := $(foreach hdr, $(header-y), \
- $(or \
+ $(if $(wildcard $(srcdir)/$(hdr)), \
$(wildcard $(srcdir)/$(hdr)), \
- $(wildcard $(oldsrcdir)/$(hdr)), \
- $(error Missing UAPI file $(srcdir)/$(hdr)) \
+ $(if $(wildcard $(oldsrcdir)/$(hdr)), \
+ $(wildcard $(oldsrcdir)/$(hdr)), \
+ $(error Missing UAPI file $(srcdir)/$(hdr))) \
)) \
$(foreach hdr, $(genhdr-y), \
- $(or \
+ $(if $(wildcard $(gendir)/$(hdr)), \
$(wildcard $(gendir)/$(hdr)), \
$(error Missing generated UAPI file $(gendir)/$(hdr)) \
))
diff --git a/security/keys/compat.c b/security/keys/compat.c
index 1c26176..d65fa7f 100644
--- a/security/keys/compat.c
+++ b/security/keys/compat.c
@@ -40,12 +40,12 @@
ARRAY_SIZE(iovstack),
iovstack, &iov);
if (ret < 0)
- return ret;
+ goto err;
if (ret == 0)
goto no_payload_free;
ret = keyctl_instantiate_key_common(id, iov, ioc, ret, ringid);
-
+err:
if (iov != iovstack)
kfree(iov);
return ret;
diff --git a/security/keys/process_keys.c b/security/keys/process_keys.c
index a571fad..42defae 100644
--- a/security/keys/process_keys.c
+++ b/security/keys/process_keys.c
@@ -57,7 +57,7 @@
kenter("%p{%u}", user, uid);
- if (user->uid_keyring) {
+ if (user->uid_keyring && user->session_keyring) {
kleave(" = 0 [exist]");
return 0;
}
diff --git a/security/selinux/xfrm.c b/security/selinux/xfrm.c
index 48665ec..8ab2951 100644
--- a/security/selinux/xfrm.c
+++ b/security/selinux/xfrm.c
@@ -310,7 +310,7 @@
if (old_ctx) {
new_ctx = kmalloc(sizeof(*old_ctx) + old_ctx->ctx_len,
- GFP_KERNEL);
+ GFP_ATOMIC);
if (!new_ctx)
return -ENOMEM;
diff --git a/sound/core/seq/seq_timer.c b/sound/core/seq/seq_timer.c
index 160b1bd..24d44b2 100644
--- a/sound/core/seq/seq_timer.c
+++ b/sound/core/seq/seq_timer.c
@@ -290,10 +290,10 @@
tid.device = SNDRV_TIMER_GLOBAL_SYSTEM;
err = snd_timer_open(&t, str, &tid, q->queue);
}
- if (err < 0) {
- snd_printk(KERN_ERR "seq fatal error: cannot create timer (%i)\n", err);
- return err;
- }
+ }
+ if (err < 0) {
+ snd_printk(KERN_ERR "seq fatal error: cannot create timer (%i)\n", err);
+ return err;
}
t->callback = snd_seq_timer_interrupt;
t->callback_data = q;
diff --git a/sound/oss/sequencer.c b/sound/oss/sequencer.c
index 30bcfe4..4ff60a6 100644
--- a/sound/oss/sequencer.c
+++ b/sound/oss/sequencer.c
@@ -545,6 +545,9 @@
case MIDI_PGM_CHANGE:
if (seq_mode == SEQ_2)
{
+ if (chn > 15)
+ break;
+
synth_devs[dev]->chn_info[chn].pgm_num = p1;
if ((int) dev >= num_synths)
synth_devs[dev]->set_instr(dev, chn, p1);
@@ -596,6 +599,9 @@
case MIDI_PITCH_BEND:
if (seq_mode == SEQ_2)
{
+ if (chn > 15)
+ break;
+
synth_devs[dev]->chn_info[chn].bender_value = w14;
if ((int) dev < num_synths)
diff --git a/sound/pci/asihpi/asihpi.c b/sound/pci/asihpi/asihpi.c
index 3536b07..0aabfed 100644
--- a/sound/pci/asihpi/asihpi.c
+++ b/sound/pci/asihpi/asihpi.c
@@ -2549,7 +2549,7 @@
static int snd_card_asihpi_mixer_new(struct snd_card_asihpi *asihpi)
{
- struct snd_card *card = asihpi->card;
+ struct snd_card *card;
unsigned int idx = 0;
unsigned int subindex = 0;
int err;
@@ -2557,6 +2557,7 @@
if (snd_BUG_ON(!asihpi))
return -EINVAL;
+ card = asihpi->card;
strcpy(card->mixername, "Asihpi Mixer");
err =
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 97c68dd..a9ebcf9 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -494,7 +494,7 @@
int snd_hda_get_num_raw_conns(struct hda_codec *codec, hda_nid_t nid)
{
- return get_num_conns(codec, nid) & AC_CLIST_LENGTH;
+ return snd_hda_get_raw_connections(codec, nid, NULL, 0);
}
/**
@@ -517,9 +517,6 @@
hda_nid_t prev_nid;
int null_count = 0;
- if (snd_BUG_ON(!conn_list || max_conns <= 0))
- return -EINVAL;
-
parm = get_num_conns(codec, nid);
if (!parm)
return 0;
@@ -545,7 +542,8 @@
AC_VERB_GET_CONNECT_LIST, 0);
if (parm == -1 && codec->bus->rirb_error)
return -EIO;
- conn_list[0] = parm & mask;
+ if (conn_list)
+ conn_list[0] = parm & mask;
return 1;
}
@@ -580,14 +578,20 @@
continue;
}
for (n = prev_nid + 1; n <= val; n++) {
- if (conns >= max_conns)
- return -ENOSPC;
- conn_list[conns++] = n;
+ if (conn_list) {
+ if (conns >= max_conns)
+ return -ENOSPC;
+ conn_list[conns] = n;
+ }
+ conns++;
}
} else {
- if (conns >= max_conns)
- return -ENOSPC;
- conn_list[conns++] = val;
+ if (conn_list) {
+ if (conns >= max_conns)
+ return -ENOSPC;
+ conn_list[conns] = val;
+ }
+ conns++;
}
prev_nid = val;
}
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index eefc456..0792b57 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -3239,7 +3239,7 @@
struct ca0132_spec *spec = codec->spec;
unsigned int tmp;
- if (!dspload_is_loaded(codec))
+ if (spec->dsp_state != DSP_DOWNLOADED)
return 0;
/* if CrystalVoice if off, vipsource should be 0 */
@@ -4267,11 +4267,12 @@
*/
static void ca0132_setup_defaults(struct hda_codec *codec)
{
+ struct ca0132_spec *spec = codec->spec;
unsigned int tmp;
int num_fx;
int idx, i;
- if (!dspload_is_loaded(codec))
+ if (spec->dsp_state != DSP_DOWNLOADED)
return;
/* out, in effects + voicefx */
@@ -4351,12 +4352,16 @@
return false;
dsp_os_image = (struct dsp_image_seg *)(fw_entry->data);
- dspload_image(codec, dsp_os_image, 0, 0, true, 0);
+ if (dspload_image(codec, dsp_os_image, 0, 0, true, 0)) {
+ pr_err("ca0132 dspload_image failed.\n");
+ goto exit_download;
+ }
+
dsp_loaded = dspload_wait_loaded(codec);
+exit_download:
release_firmware(fw_entry);
-
return dsp_loaded;
}
@@ -4367,16 +4372,13 @@
#ifndef CONFIG_SND_HDA_CODEC_CA0132_DSP
return; /* NOP */
#endif
- spec->dsp_state = DSP_DOWNLOAD_INIT;
- if (spec->dsp_state == DSP_DOWNLOAD_INIT) {
- chipio_enable_clocks(codec);
- spec->dsp_state = DSP_DOWNLOADING;
- if (!ca0132_download_dsp_images(codec))
- spec->dsp_state = DSP_DOWNLOAD_FAILED;
- else
- spec->dsp_state = DSP_DOWNLOADED;
- }
+ chipio_enable_clocks(codec);
+ spec->dsp_state = DSP_DOWNLOADING;
+ if (!ca0132_download_dsp_images(codec))
+ spec->dsp_state = DSP_DOWNLOAD_FAILED;
+ else
+ spec->dsp_state = DSP_DOWNLOADED;
if (spec->dsp_state == DSP_DOWNLOADED)
ca0132_set_dsp_msr(codec, true);
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index 72ebb8a..60d08f6 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -506,6 +506,8 @@
if (!spec)
return -ENOMEM;
+ spec->gen.automute_hook = cs_automute;
+
snd_hda_pick_fixup(codec, cs420x_models, cs420x_fixup_tbl,
cs420x_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
@@ -893,6 +895,8 @@
if (!spec)
return -ENOMEM;
+ spec->gen.automute_hook = cs_automute;
+
snd_hda_pick_fixup(codec, cs421x_models, cs421x_fixup_tbl,
cs421x_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 83d5335..dafe04a 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -815,6 +815,29 @@
return 0;
}
+/* check whether a built-in speaker is included in parsed pins */
+static bool has_builtin_speaker(struct hda_codec *codec)
+{
+ struct sigmatel_spec *spec = codec->spec;
+ hda_nid_t *nid_pin;
+ int nids, i;
+
+ if (spec->gen.autocfg.line_out_type == AUTO_PIN_SPEAKER_OUT) {
+ nid_pin = spec->gen.autocfg.line_out_pins;
+ nids = spec->gen.autocfg.line_outs;
+ } else {
+ nid_pin = spec->gen.autocfg.speaker_pins;
+ nids = spec->gen.autocfg.speaker_outs;
+ }
+
+ for (i = 0; i < nids; i++) {
+ unsigned int def_conf = snd_hda_codec_get_pincfg(codec, nid_pin[i]);
+ if (snd_hda_get_input_pin_attr(def_conf) == INPUT_PIN_ATTR_INT)
+ return true;
+ }
+ return false;
+}
+
/*
* PC beep controls
*/
@@ -3890,6 +3913,12 @@
return err;
}
+ /* Don't GPIO-mute speakers if there are no internal speakers, because
+ * the GPIO might be necessary for Headphone
+ */
+ if (spec->eapd_switch && !has_builtin_speaker(codec))
+ spec->eapd_switch = 0;
+
codec->proc_widget_hook = stac92hd7x_proc_hook;
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 803953a..2da8ad7 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -244,6 +244,21 @@
usb_ifnum_to_if(dev, ctrlif)->intf_assoc;
if (!assoc) {
+ /*
+ * Firmware writers cannot count to three. So to find
+ * the IAD on the NuForce UDH-100, also check the next
+ * interface.
+ */
+ struct usb_interface *iface =
+ usb_ifnum_to_if(dev, ctrlif + 1);
+ if (iface &&
+ iface->intf_assoc &&
+ iface->intf_assoc->bFunctionClass == USB_CLASS_AUDIO &&
+ iface->intf_assoc->bFunctionProtocol == UAC_VERSION_2)
+ assoc = iface->intf_assoc;
+ }
+
+ if (!assoc) {
snd_printk(KERN_ERR "Audio class v2 interfaces need an interface association\n");
return -EINVAL;
}
diff --git a/tools/usb/ffs-test.c b/tools/usb/ffs-test.c
index 8674b9e..fe1e66b 100644
--- a/tools/usb/ffs-test.c
+++ b/tools/usb/ffs-test.c
@@ -38,7 +38,7 @@
#include <unistd.h>
#include <tools/le_byteshift.h>
-#include "../../include/linux/usb/functionfs.h"
+#include "../../include/uapi/linux/usb/functionfs.h"
/******************** Little Endian Handling ********************************/