[SCSI] qla2xxx: Code changes to support new dynamic logging infrastructure.
The code is changed to support the new dynamic logging infrastructure.
Following are the levels added.
Default is 0 - no logging. 0x40000000 - Module Init & Probe.
0x20000000 - Mailbox Cmnds. 0x10000000 - Device Discovery.
0x08000000 - IO tracing. 0x04000000 - DPC Thread.
0x02000000 - Async events. 0x01000000 - Timer routines.
0x00800000 - User space. 0x00400000 - Task Management.
0x00200000 - AER/EEH. 0x00100000 - Multi Q.
0x00080000 - P3P Specific. 0x00040000 - Virtual Port.
0x00020000 - Buffer Dump. 0x00010000 - Misc.
0x7fffffff - For enabling all logs, can be too many logs.
Setting ql2xextended_error_logging module parameter to any of the above
value, will enable the debug for that particular level.
Do LOGICAL OR of the value to enable more than one level.
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 6936476..eff1356 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -189,6 +189,7 @@
uint16_t word;
uint32_t nv_cmd, wait_cnt;
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
+ scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
qla2x00_nv_write(ha, NVR_DATA_OUT);
qla2x00_nv_write(ha, 0);
@@ -220,8 +221,8 @@
wait_cnt = NVR_WAIT_CNT;
do {
if (!--wait_cnt) {
- DEBUG9_10(qla_printk(KERN_WARNING, ha,
- "NVRAM didn't go ready...\n"));
+ ql_dbg(ql_dbg_user, vha, 0x708d,
+ "NVRAM didn't go ready...\n");
break;
}
NVRAM_DELAY();
@@ -308,6 +309,7 @@
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
uint32_t word, wait_cnt;
uint16_t wprot, wprot_old;
+ scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
/* Clear NVRAM write protection. */
ret = QLA_FUNCTION_FAILED;
@@ -350,8 +352,8 @@
wait_cnt = NVR_WAIT_CNT;
do {
if (!--wait_cnt) {
- DEBUG9_10(qla_printk(KERN_WARNING, ha,
- "NVRAM didn't go ready...\n"));
+ ql_dbg(ql_dbg_user, vha, 0x708e,
+ "NVRAM didn't go ready...\n");
break;
}
NVRAM_DELAY();
@@ -371,6 +373,7 @@
{
struct device_reg_2xxx __iomem *reg = &ha->iobase->isp;
uint32_t word, wait_cnt;
+ scsi_qla_host_t *vha = pci_get_drvdata(ha->pdev);
if (stat != QLA_SUCCESS)
return;
@@ -409,8 +412,8 @@
wait_cnt = NVR_WAIT_CNT;
do {
if (!--wait_cnt) {
- DEBUG9_10(qla_printk(KERN_WARNING, ha,
- "NVRAM didn't go ready...\n"));
+ ql_dbg(ql_dbg_user, vha, 0x708f,
+ "NVRAM didn't go ready...\n");
break;
}
NVRAM_DELAY();
@@ -607,9 +610,10 @@
for (chksum = 0; cnt; cnt--)
chksum += le16_to_cpu(*wptr++);
if (chksum) {
- qla_printk(KERN_ERR, ha,
+ ql_log(ql_log_fatal, vha, 0x0045,
"Inconsistent FLTL detected: checksum=0x%x.\n", chksum);
- qla2x00_dump_buffer(buf, sizeof(struct qla_flt_location));
+ ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010e,
+ buf, sizeof(struct qla_flt_location));
return QLA_FUNCTION_FAILED;
}
@@ -618,7 +622,9 @@
*start = (le16_to_cpu(fltl->start_hi) << 16 |
le16_to_cpu(fltl->start_lo)) >> 2;
end:
- DEBUG2(qla_printk(KERN_DEBUG, ha, "FLTL[%s] = 0x%x.\n", loc, *start));
+ ql_dbg(ql_dbg_init, vha, 0x0046,
+ "FLTL[%s] = 0x%x.\n",
+ loc, *start);
return QLA_SUCCESS;
}
@@ -685,10 +691,10 @@
if (*wptr == __constant_cpu_to_le16(0xffff))
goto no_flash_data;
if (flt->version != __constant_cpu_to_le16(1)) {
- DEBUG2(qla_printk(KERN_INFO, ha, "Unsupported FLT detected: "
- "version=0x%x length=0x%x checksum=0x%x.\n",
+ ql_log(ql_log_warn, vha, 0x0047,
+ "Unsupported FLT detected: version=0x%x length=0x%x checksum=0x%x.\n",
le16_to_cpu(flt->version), le16_to_cpu(flt->length),
- le16_to_cpu(flt->checksum)));
+ le16_to_cpu(flt->checksum));
goto no_flash_data;
}
@@ -696,10 +702,10 @@
for (chksum = 0; cnt; cnt--)
chksum += le16_to_cpu(*wptr++);
if (chksum) {
- DEBUG2(qla_printk(KERN_INFO, ha, "Inconsistent FLT detected: "
- "version=0x%x length=0x%x checksum=0x%x.\n",
+ ql_log(ql_log_fatal, vha, 0x0048,
+ "Inconsistent FLT detected: version=0x%x length=0x%x checksum=0x%x.\n",
le16_to_cpu(flt->version), le16_to_cpu(flt->length),
- chksum));
+ le16_to_cpu(flt->checksum));
goto no_flash_data;
}
@@ -708,10 +714,11 @@
for ( ; cnt; cnt--, region++) {
/* Store addresses as DWORD offsets. */
start = le32_to_cpu(region->start) >> 2;
-
- DEBUG3(qla_printk(KERN_DEBUG, ha, "FLT[%02x]: start=0x%x "
- "end=0x%x size=0x%x.\n", le32_to_cpu(region->code), start,
- le32_to_cpu(region->end) >> 2, le32_to_cpu(region->size)));
+ ql_dbg(ql_dbg_init, vha, 0x0049,
+ "FLT[%02x]: start=0x%x "
+ "end=0x%x size=0x%x.\n", le32_to_cpu(region->code),
+ start, le32_to_cpu(region->end) >> 2,
+ le32_to_cpu(region->size));
switch (le32_to_cpu(region->code) & 0xff) {
case FLT_REG_FW:
@@ -796,12 +803,16 @@
ha->flt_region_npiv_conf = ha->flags.port0 ?
def_npiv_conf0[def] : def_npiv_conf1[def];
done:
- DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x "
- "vpd_nvram=0x%x vpd=0x%x nvram=0x%x fdt=0x%x flt=0x%x "
- "npiv=0x%x. fcp_prio_cfg=0x%x\n", loc, ha->flt_region_boot,
- ha->flt_region_fw, ha->flt_region_vpd_nvram, ha->flt_region_vpd,
- ha->flt_region_nvram, ha->flt_region_fdt, ha->flt_region_flt,
- ha->flt_region_npiv_conf, ha->flt_region_fcp_prio));
+ ql_dbg(ql_dbg_init, vha, 0x004a,
+ "FLT[%s]: boot=0x%x fw=0x%x vpd_nvram=0x%x vpd=0x%x.\n",
+ loc, ha->flt_region_boot,
+ ha->flt_region_fw, ha->flt_region_vpd_nvram,
+ ha->flt_region_vpd);
+ ql_dbg(ql_dbg_init, vha, 0x004b,
+ "nvram=0x%x fdt=0x%x flt=0x%x npiv=0x%x fcp_prif_cfg=0x%x.\n",
+ ha->flt_region_nvram,
+ ha->flt_region_fdt, ha->flt_region_flt,
+ ha->flt_region_npiv_conf, ha->flt_region_fcp_prio);
}
static void
@@ -833,10 +844,12 @@
cnt++)
chksum += le16_to_cpu(*wptr++);
if (chksum) {
- DEBUG2(qla_printk(KERN_INFO, ha, "Inconsistent FDT detected: "
- "checksum=0x%x id=%c version=0x%x.\n", chksum, fdt->sig[0],
- le16_to_cpu(fdt->version)));
- DEBUG9(qla2x00_dump_buffer((uint8_t *)fdt, sizeof(*fdt)));
+ ql_dbg(ql_dbg_init, vha, 0x004c,
+ "Inconsistent FDT detected:"
+ " checksum=0x%x id=%c version0x%x.\n", chksum,
+ fdt->sig[0], le16_to_cpu(fdt->version));
+ ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x0113,
+ (uint8_t *)fdt, sizeof(*fdt));
goto no_flash_data;
}
@@ -890,11 +903,12 @@
break;
}
done:
- DEBUG2(qla_printk(KERN_DEBUG, ha, "FDT[%s]: (0x%x/0x%x) erase=0x%x "
- "pro=%x upro=%x wrtd=0x%x blk=0x%x.\n", loc, mid, fid,
+ ql_dbg(ql_dbg_init, vha, 0x004d,
+ "FDT[%x]: (0x%x/0x%x) erase=0x%x "
+ "pr=%x upro=%x wrtd=0x%x blk=0x%x.\n", loc, mid, fid,
ha->fdt_erase_cmd, ha->fdt_protect_sec_cmd,
- ha->fdt_unprotect_sec_cmd, ha->fdt_wrt_disable,
- ha->fdt_block_size));
+ ha->fdt_wrt_disable, ha->fdt_block_size);
+
}
static void
@@ -919,6 +933,10 @@
ha->nx_dev_init_timeout = le32_to_cpu(*wptr++);
ha->nx_reset_timeout = le32_to_cpu(*wptr);
}
+ ql_dbg(ql_dbg_init, vha, 0x004e,
+ "nx_dev_init_timeout=%d "
+ "nx_reset_timeout=%d.\n", ha->nx_dev_init_timeout,
+ ha->nx_reset_timeout);
return;
}
@@ -963,17 +981,18 @@
if (hdr.version == __constant_cpu_to_le16(0xffff))
return;
if (hdr.version != __constant_cpu_to_le16(1)) {
- DEBUG2(qla_printk(KERN_INFO, ha, "Unsupported NPIV-Config "
+ ql_dbg(ql_dbg_user, vha, 0x7090,
+ "Unsupported NPIV-Config "
"detected: version=0x%x entries=0x%x checksum=0x%x.\n",
le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries),
- le16_to_cpu(hdr.checksum)));
+ le16_to_cpu(hdr.checksum));
return;
}
data = kmalloc(NPIV_CONFIG_SIZE, GFP_KERNEL);
if (!data) {
- DEBUG2(qla_printk(KERN_INFO, ha, "NPIV-Config: Unable to "
- "allocate memory.\n"));
+ ql_log(ql_log_warn, vha, 0x7091,
+ "Unable to allocate memory for data.\n");
return;
}
@@ -985,10 +1004,11 @@
for (wptr = data, chksum = 0; cnt; cnt--)
chksum += le16_to_cpu(*wptr++);
if (chksum) {
- DEBUG2(qla_printk(KERN_INFO, ha, "Inconsistent NPIV-Config "
+ ql_dbg(ql_dbg_user, vha, 0x7092,
+ "Inconsistent NPIV-Config "
"detected: version=0x%x entries=0x%x checksum=0x%x.\n",
le16_to_cpu(hdr.version), le16_to_cpu(hdr.entries),
- chksum));
+ le16_to_cpu(hdr.checksum));
goto done;
}
@@ -1014,21 +1034,22 @@
vid.port_name = wwn_to_u64(entry->port_name);
vid.node_name = wwn_to_u64(entry->node_name);
- DEBUG2(qla_printk(KERN_INFO, ha, "NPIV[%02x]: wwpn=%llx "
- "wwnn=%llx vf_id=0x%x Q_qos=0x%x F_qos=0x%x.\n", cnt,
- (unsigned long long)vid.port_name,
- (unsigned long long)vid.node_name,
- le16_to_cpu(entry->vf_id),
- entry->q_qos, entry->f_qos));
+ ql_dbg(ql_dbg_user, vha, 0x7093,
+ "NPIV[%02x]: wwpn=%llx "
+ "wwnn=%llx vf_id=0x%x Q_qos=0x%x F_qos=0x%x.\n", cnt,
+ (unsigned long long)vid.port_name,
+ (unsigned long long)vid.node_name,
+ le16_to_cpu(entry->vf_id),
+ entry->q_qos, entry->f_qos);
if (i < QLA_PRECONFIG_VPORTS) {
vport = fc_vport_create(vha->host, 0, &vid);
if (!vport)
- qla_printk(KERN_INFO, ha,
- "NPIV-Config: Failed to create vport [%02x]: "
- "wwpn=%llx wwnn=%llx.\n", cnt,
- (unsigned long long)vid.port_name,
- (unsigned long long)vid.node_name);
+ ql_log(ql_log_warn, vha, 0x7094,
+ "NPIV-Config Failed to create vport [%02x]: "
+ "wwpn=%llx wwnn=%llx.\n", cnt,
+ (unsigned long long)vid.port_name,
+ (unsigned long long)vid.node_name);
}
}
done:
@@ -1127,9 +1148,10 @@
optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
&optrom_dma, GFP_KERNEL);
if (!optrom) {
- qla_printk(KERN_DEBUG, ha,
- "Unable to allocate memory for optrom burst write "
- "(%x KB).\n", OPTROM_BURST_SIZE / 1024);
+ ql_log(ql_log_warn, vha, 0x7095,
+ "Unable to allocate "
+ "memory for optrom burst write (%x KB).\n",
+ OPTROM_BURST_SIZE / 1024);
}
}
@@ -1138,7 +1160,7 @@
ret = qla24xx_unprotect_flash(vha);
if (ret != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x7096,
"Unable to unprotect flash for update.\n");
goto done;
}
@@ -1156,9 +1178,9 @@
0xff0000) | ((fdata >> 16) & 0xff));
ret = qla24xx_erase_sector(vha, fdata);
if (ret != QLA_SUCCESS) {
- DEBUG9(qla_printk(KERN_WARNING, ha,
- "Unable to erase sector: address=%x.\n",
- faddr));
+ ql_dbg(ql_dbg_user, vha, 0x7007,
+ "Unable to erase erase sector: address=%x.\n",
+ faddr);
break;
}
}
@@ -1172,12 +1194,12 @@
flash_data_addr(ha, faddr),
OPTROM_BURST_DWORDS);
if (ret != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x7097,
"Unable to burst-write optrom segment "
"(%x/%x/%llx).\n", ret,
flash_data_addr(ha, faddr),
(unsigned long long)optrom_dma);
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x7098,
"Reverting to slow-write.\n");
dma_free_coherent(&ha->pdev->dev,
@@ -1194,9 +1216,9 @@
ret = qla24xx_write_flash_dword(ha,
flash_data_addr(ha, faddr), cpu_to_le32(*dwptr));
if (ret != QLA_SUCCESS) {
- DEBUG9(printk("%s(%ld) Unable to program flash "
- "address=%x data=%x.\n", __func__,
- vha->host_no, faddr, *dwptr));
+ ql_dbg(ql_dbg_user, vha, 0x7006,
+ "Unable to program flash address=%x data=%x.\n",
+ faddr, *dwptr);
break;
}
@@ -1211,7 +1233,7 @@
ret = qla24xx_protect_flash(vha);
if (ret != QLA_SUCCESS)
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x7099,
"Unable to protect flash after update.\n");
done:
if (optrom)
@@ -1324,9 +1346,9 @@
ret = qla24xx_write_flash_dword(ha,
nvram_data_addr(ha, naddr), cpu_to_le32(*dwptr));
if (ret != QLA_SUCCESS) {
- DEBUG9(qla_printk(KERN_WARNING, ha,
+ ql_dbg(ql_dbg_user, vha, 0x709a,
"Unable to program nvram address=%x data=%x.\n",
- naddr, *dwptr));
+ naddr, *dwptr);
break;
}
}
@@ -1476,7 +1498,7 @@
ha->fw_options[1] |= FO1_DISABLE_GPIO6_7;
if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x709b,
"Unable to update fw options (beacon on).\n");
return QLA_FUNCTION_FAILED;
}
@@ -1541,7 +1563,7 @@
rval = qla2x00_set_fw_options(vha, ha->fw_options);
if (rval != QLA_SUCCESS)
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x709c,
"Unable to update fw options (beacon off).\n");
return rval;
}
@@ -1616,7 +1638,7 @@
if (qla2x00_get_fw_options(vha, ha->fw_options) !=
QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x7009,
"Unable to update fw options (beacon on).\n");
return QLA_FUNCTION_FAILED;
}
@@ -1670,14 +1692,14 @@
ha->fw_options[1] &= ~ADD_FO1_DISABLE_GPIO_LED_CTRL;
if (qla2x00_set_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Unable to update fw options (beacon off).\n");
+ ql_log(ql_log_warn, vha, 0x704d,
+ "Unable to update fw options (beacon on).\n");
return QLA_FUNCTION_FAILED;
}
if (qla2x00_get_fw_options(vha, ha->fw_options) != QLA_SUCCESS) {
- qla_printk(KERN_WARNING, ha,
- "Unable to get fw options (beacon off).\n");
+ ql_log(ql_log_warn, vha, 0x704e,
+ "Unable to update fw options (beacon on).\n");
return QLA_FUNCTION_FAILED;
}
@@ -2389,10 +2411,9 @@
optrom = dma_alloc_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
&optrom_dma, GFP_KERNEL);
if (!optrom) {
- qla_printk(KERN_DEBUG, ha,
- "Unable to allocate memory for optrom burst read "
- "(%x KB).\n", OPTROM_BURST_SIZE / 1024);
-
+ ql_log(ql_log_warn, vha, 0x00cc,
+ "Unable to allocate memory for optrom burst read (%x KB).\n",
+ OPTROM_BURST_SIZE / 1024);
goto slow_read;
}
@@ -2407,12 +2428,11 @@
rval = qla2x00_dump_ram(vha, optrom_dma,
flash_data_addr(ha, faddr), burst);
if (rval) {
- qla_printk(KERN_WARNING, ha,
- "Unable to burst-read optrom segment "
- "(%x/%x/%llx).\n", rval,
- flash_data_addr(ha, faddr),
+ ql_log(ql_log_warn, vha, 0x00f5,
+ "Unable to burst-read optrom segment (%x/%x/%llx).\n",
+ rval, flash_data_addr(ha, faddr),
(unsigned long long)optrom_dma);
- qla_printk(KERN_WARNING, ha,
+ ql_log(ql_log_warn, vha, 0x00f6,
"Reverting to slow-read.\n");
dma_free_coherent(&ha->pdev->dev, OPTROM_BURST_SIZE,
@@ -2556,8 +2576,8 @@
if (qla2x00_read_flash_byte(ha, pcihdr) != 0x55 ||
qla2x00_read_flash_byte(ha, pcihdr + 0x01) != 0xaa) {
/* No signature */
- DEBUG2(qla_printk(KERN_DEBUG, ha, "No matching ROM "
- "signature.\n"));
+ ql_log(ql_log_fatal, vha, 0x0050,
+ "No matching ROM signature.\n");
ret = QLA_FUNCTION_FAILED;
break;
}
@@ -2573,8 +2593,8 @@
qla2x00_read_flash_byte(ha, pcids + 0x2) != 'I' ||
qla2x00_read_flash_byte(ha, pcids + 0x3) != 'R') {
/* Incorrect header. */
- DEBUG2(qla_printk(KERN_INFO, ha, "PCI data struct not "
- "found pcir_adr=%x.\n", pcids));
+ ql_log(ql_log_fatal, vha, 0x0051,
+ "PCI data struct not found pcir_adr=%x.\n", pcids);
ret = QLA_FUNCTION_FAILED;
break;
}
@@ -2588,8 +2608,9 @@
qla2x00_read_flash_byte(ha, pcids + 0x12);
ha->bios_revision[1] =
qla2x00_read_flash_byte(ha, pcids + 0x13);
- DEBUG3(qla_printk(KERN_DEBUG, ha, "read BIOS %d.%d.\n",
- ha->bios_revision[1], ha->bios_revision[0]));
+ ql_dbg(ql_dbg_init, vha, 0x0052,
+ "Read BIOS %d.%d.\n",
+ ha->bios_revision[1], ha->bios_revision[0]);
break;
case ROM_CODE_TYPE_FCODE:
/* Open Firmware standard for PCI (FCode). */
@@ -2602,12 +2623,14 @@
qla2x00_read_flash_byte(ha, pcids + 0x12);
ha->efi_revision[1] =
qla2x00_read_flash_byte(ha, pcids + 0x13);
- DEBUG3(qla_printk(KERN_DEBUG, ha, "read EFI %d.%d.\n",
- ha->efi_revision[1], ha->efi_revision[0]));
+ ql_dbg(ql_dbg_init, vha, 0x0053,
+ "Read EFI %d.%d.\n",
+ ha->efi_revision[1], ha->efi_revision[0]);
break;
default:
- DEBUG2(qla_printk(KERN_INFO, ha, "Unrecognized code "
- "type %x at pcids %x.\n", code_type, pcids));
+ ql_log(ql_log_warn, vha, 0x0054,
+ "Unrecognized code type %x at pcids %x.\n",
+ code_type, pcids);
break;
}
@@ -2627,21 +2650,28 @@
qla2x00_read_flash_data(ha, dbyte, ha->flt_region_fw * 4 + 10,
8);
- DEBUG3(qla_printk(KERN_DEBUG, ha, "dumping fw ver from "
- "flash:\n"));
- DEBUG3(qla2x00_dump_buffer((uint8_t *)dbyte, 8));
+ ql_dbg(ql_dbg_init + ql_dbg_buffer, vha, 0x010a,
+ "Dumping fw "
+ "ver from flash:.\n");
+ ql_dump_buffer(ql_dbg_init + ql_dbg_buffer, vha, 0x010b,
+ (uint8_t *)dbyte, 8);
if ((dcode[0] == 0xffff && dcode[1] == 0xffff &&
dcode[2] == 0xffff && dcode[3] == 0xffff) ||
(dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
dcode[3] == 0)) {
- DEBUG2(qla_printk(KERN_INFO, ha, "Unrecognized fw "
- "revision at %x.\n", ha->flt_region_fw * 4));
+ ql_log(ql_log_warn, vha, 0x0057,
+ "Unrecognized fw revision at %x.\n",
+ ha->flt_region_fw * 4);
} else {
/* values are in big endian */
ha->fw_revision[0] = dbyte[0] << 16 | dbyte[1];
ha->fw_revision[1] = dbyte[2] << 16 | dbyte[3];
ha->fw_revision[2] = dbyte[4] << 16 | dbyte[5];
+ ql_dbg(ql_dbg_init, vha, 0x0058,
+ "FW Version: "
+ "%d.%d.%d.\n", ha->fw_revision[0],
+ ha->fw_revision[1], ha->fw_revision[2]);
}
}
@@ -2683,8 +2713,8 @@
bcode = mbuf + (pcihdr % 4);
if (bcode[0x0] != 0x55 || bcode[0x1] != 0xaa) {
/* No signature */
- DEBUG2(qla_printk(KERN_DEBUG, ha, "No matching ROM "
- "signature.\n"));
+ ql_log(ql_log_fatal, vha, 0x0059,
+ "No matching ROM signature.\n");
ret = QLA_FUNCTION_FAILED;
break;
}
@@ -2699,8 +2729,8 @@
if (bcode[0x0] != 'P' || bcode[0x1] != 'C' ||
bcode[0x2] != 'I' || bcode[0x3] != 'R') {
/* Incorrect header. */
- DEBUG2(qla_printk(KERN_INFO, ha, "PCI data struct not "
- "found pcir_adr=%x.\n", pcids));
+ ql_log(ql_log_fatal, vha, 0x005a,
+ "PCI data struct not found pcir_adr=%x.\n", pcids);
ret = QLA_FUNCTION_FAILED;
break;
}
@@ -2712,26 +2742,30 @@
/* Intel x86, PC-AT compatible. */
ha->bios_revision[0] = bcode[0x12];
ha->bios_revision[1] = bcode[0x13];
- DEBUG3(qla_printk(KERN_DEBUG, ha, "read BIOS %d.%d.\n",
- ha->bios_revision[1], ha->bios_revision[0]));
+ ql_dbg(ql_dbg_init, vha, 0x005b,
+ "Read BIOS %d.%d.\n",
+ ha->bios_revision[1], ha->bios_revision[0]);
break;
case ROM_CODE_TYPE_FCODE:
/* Open Firmware standard for PCI (FCode). */
ha->fcode_revision[0] = bcode[0x12];
ha->fcode_revision[1] = bcode[0x13];
- DEBUG3(qla_printk(KERN_DEBUG, ha, "read FCODE %d.%d.\n",
- ha->fcode_revision[1], ha->fcode_revision[0]));
+ ql_dbg(ql_dbg_init, vha, 0x005c,
+ "Read FCODE %d.%d.\n",
+ ha->fcode_revision[1], ha->fcode_revision[0]);
break;
case ROM_CODE_TYPE_EFI:
/* Extensible Firmware Interface (EFI). */
ha->efi_revision[0] = bcode[0x12];
ha->efi_revision[1] = bcode[0x13];
- DEBUG3(qla_printk(KERN_DEBUG, ha, "read EFI %d.%d.\n",
- ha->efi_revision[1], ha->efi_revision[0]));
+ ql_dbg(ql_dbg_init, vha, 0x005d,
+ "Read EFI %d.%d.\n",
+ ha->efi_revision[1], ha->efi_revision[0]);
break;
default:
- DEBUG2(qla_printk(KERN_INFO, ha, "Unrecognized code "
- "type %x at pcids %x.\n", code_type, pcids));
+ ql_log(ql_log_warn, vha, 0x005e,
+ "Unrecognized code type %x at pcids %x.\n",
+ code_type, pcids);
break;
}
@@ -2753,13 +2787,18 @@
dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
(dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
dcode[3] == 0)) {
- DEBUG2(qla_printk(KERN_INFO, ha, "Unrecognized fw "
- "revision at %x.\n", ha->flt_region_fw * 4));
+ ql_log(ql_log_warn, vha, 0x005f,
+ "Unrecognized fw revision at %x.\n",
+ ha->flt_region_fw * 4);
} else {
ha->fw_revision[0] = dcode[0];
ha->fw_revision[1] = dcode[1];
ha->fw_revision[2] = dcode[2];
ha->fw_revision[3] = dcode[3];
+ ql_dbg(ql_dbg_init, vha, 0x0060,
+ "Firmware revision %d.%d.%d.%d.\n",
+ ha->fw_revision[0], ha->fw_revision[1],
+ ha->fw_revision[2], ha->fw_revision[3]);
}
/* Check for golden firmware and get version if available */
@@ -2775,9 +2814,9 @@
if (dcode[4] == 0xFFFFFFFF && dcode[5] == 0xFFFFFFFF &&
dcode[6] == 0xFFFFFFFF && dcode[7] == 0xFFFFFFFF) {
- DEBUG2(qla_printk(KERN_INFO, ha,
- "%s(%ld): Unrecognized golden fw at 0x%x.\n",
- __func__, vha->host_no, ha->flt_region_gold_fw * 4));
+ ql_log(ql_log_warn, vha, 0x0056,
+ "Unrecognized golden fw at 0x%x.\n",
+ ha->flt_region_gold_fw * 4);
return ret;
}
@@ -2843,9 +2882,9 @@
if (!ha->fcp_prio_cfg) {
ha->fcp_prio_cfg = vmalloc(FCP_PRIO_CFG_SIZE);
if (!ha->fcp_prio_cfg) {
- qla_printk(KERN_WARNING, ha,
- "Unable to allocate memory for fcp priority data "
- "(%x).\n", FCP_PRIO_CFG_SIZE);
+ ql_log(ql_log_warn, vha, 0x00d5,
+ "Unable to allocate memory for fcp priorty data (%x).\n",
+ FCP_PRIO_CFG_SIZE);
return QLA_FUNCTION_FAILED;
}
}
@@ -2857,7 +2896,7 @@
ha->isp_ops->read_optrom(vha, (uint8_t *)ha->fcp_prio_cfg,
fcp_prio_addr << 2, FCP_PRIO_CFG_HDR_SIZE);
- if (!qla24xx_fcp_prio_cfg_valid(ha->fcp_prio_cfg, 0))
+ if (!qla24xx_fcp_prio_cfg_valid(vha, ha->fcp_prio_cfg, 0))
goto fail;
/* read remaining FCP CMD config data from flash */
@@ -2869,7 +2908,7 @@
fcp_prio_addr << 2, (len < max_len ? len : max_len));
/* revalidate the entire FCP priority config data, including entries */
- if (!qla24xx_fcp_prio_cfg_valid(ha->fcp_prio_cfg, 1))
+ if (!qla24xx_fcp_prio_cfg_valid(vha, ha->fcp_prio_cfg, 1))
goto fail;
ha->flags.fcp_prio_enabled = 1;