arch/arm/boot/dts/sun8i-a23-a33.dtsi - kernel/msm-4.19 - Gitiles

 /*
  * Copyright 2014 Chen-Yu Tsai
  *
  * Chen-Yu Tsai <wens@csie.org>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
  *     published by the Free Software Foundation; either version 2 of the
  *     License, or (at your option) any later version.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 #include "skeleton.dtsi"

 #include <dt-bindings/interrupt-controller/arm-gic.h>

 #include <dt-bindings/pinctrl/sun4i-a10.h>

 / {
 	interrupt-parent = <&gic>;

 	chosen {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;

 		framebuffer@0 {
 			compatible = "allwinner,simple-framebuffer",
 				     "simple-framebuffer";
 			allwinner,pipeline = "de_be0-lcd0";
 			clocks = <&pll6 0>;
 			status = "disabled";
 		};
 	};

 	timer {
 		compatible = "arm,armv7-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
 		clock-frequency = <24000000>;
 		arm,cpu-registers-not-fw-configured;
 	};

 	cpus {
 		enable-method = "allwinner,sun8i-a23";
 		#address-cells = <1>;
 		#size-cells = <0>;

 		cpu@0 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <0>;
 		};

 		cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
 			reg = <1>;
 		};
 	};

 	clocks {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;

 		osc24M: osc24M_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <24000000>;
 			clock-output-names = "osc24M";
 		};

 		osc32k: osc32k_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <32768>;
 			clock-output-names = "osc32k";
 		};

 		pll1: clk@01c20000 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun8i-a23-pll1-clk";
 			reg = <0x01c20000 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll1";
 		};

 		/* dummy clock until actually implemented */
 		pll5: pll5_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
 			clock-frequency = <0>;
 			clock-output-names = "pll5";
 		};

 		pll6: clk@01c20028 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun6i-a31-pll6-clk";
 			reg = <0x01c20028 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "pll6", "pll6x2";
 		};

 		cpu: cpu_clk@01c20050 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-cpu-clk";
 			reg = <0x01c20050 0x4>;

 			/*
 			 * PLL1 is listed twice here.
 			 * While it looks suspicious, it's actually documented
 			 * that way both in the datasheet and in the code from
 			 * Allwinner.
 			 */
 			clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
 			clock-output-names = "cpu";
 		};

 		axi: axi_clk@01c20050 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun8i-a23-axi-clk";
 			reg = <0x01c20050 0x4>;
 			clocks = <&cpu>;
 			clock-output-names = "axi";
 		};

 		ahb1: ahb1_clk@01c20054 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun6i-a31-ahb1-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
 			clock-output-names = "ahb1";
 		};

 		apb1: apb1_clk@01c20054 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-apb0-clk";
 			reg = <0x01c20054 0x4>;
 			clocks = <&ahb1>;
 			clock-output-names = "apb1";
 		};

 		ahb1_gates: clk@01c20060 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
 			reg = <0x01c20060 0x8>;
 			clocks = <&ahb1>;
 			clock-indices = <1>, <6>,
 					<8>, <9>, <10>,
 					<13>, <14>,
 					<19>, <20>,
 					<21>, <24>, <26>,
 					<29>, <32>, <36>,
 					<40>, <44>, <46>,
 					<52>, <54>,
 					<57>;
 			clock-output-names = "ahb1_mipidsi", "ahb1_dma",
 					"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
 					"ahb1_nand", "ahb1_sdram",
 					"ahb1_hstimer", "ahb1_spi0",
 					"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
 					"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
 					"ahb1_csi", "ahb1_be",	"ahb1_fe",
 					"ahb1_gpu", "ahb1_spinlock",
 					"ahb1_drc";
 		};

 		apb1_gates: clk@01c20068 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun8i-a23-apb1-gates-clk";
 			reg = <0x01c20068 0x4>;
 			clocks = <&apb1>;
 			clock-indices = <0>, <5>,
 					<12>, <13>;
 			clock-output-names = "apb1_codec", "apb1_pio",
 					"apb1_daudio0",	"apb1_daudio1";
 		};

 		apb2: clk@01c20058 {
 			#clock-cells = <0>;
 			compatible = "allwinner,sun4i-a10-apb1-clk";
 			reg = <0x01c20058 0x4>;
 			clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
 			clock-output-names = "apb2";
 		};

 		apb2_gates: clk@01c2006c {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun8i-a23-apb2-gates-clk";
 			reg = <0x01c2006c 0x4>;
 			clocks = <&apb2>;
 			clock-indices = <0>, <1>,
 					<2>, <16>,
 					<17>, <18>,
 					<19>, <20>;
 			clock-output-names = "apb2_i2c0", "apb2_i2c1",
 					"apb2_i2c2", "apb2_uart0",
 					"apb2_uart1", "apb2_uart2",
 					"apb2_uart3", "apb2_uart4";
 		};

 		mmc0_clk: clk@01c20088 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20088 0x4>;
 			clocks = <&osc24M>, <&pll6 0>;
 			clock-output-names = "mmc0",
 					     "mmc0_output",
 					     "mmc0_sample";
 		};

 		mmc1_clk: clk@01c2008c {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c2008c 0x4>;
 			clocks = <&osc24M>, <&pll6 0>;
 			clock-output-names = "mmc1",
 					     "mmc1_output",
 					     "mmc1_sample";
 		};

 		mmc2_clk: clk@01c20090 {
 			#clock-cells = <1>;
 			compatible = "allwinner,sun4i-a10-mmc-clk";
 			reg = <0x01c20090 0x4>;
 			clocks = <&osc24M>, <&pll6 0>;
 			clock-output-names = "mmc2",
 					     "mmc2_output",
 					     "mmc2_sample";
 		};

 		usb_clk: clk@01c200cc {
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			compatible = "allwinner,sun8i-a23-usb-clk";
 			reg = <0x01c200cc 0x4>;
 			clocks = <&osc24M>;
 			clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic",
 					     "usb_hsic_12M", "usb_ohci0";
 		};
 	};

 	soc@01c00000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;

 		dma: dma-controller@01c02000 {
 			compatible = "allwinner,sun8i-a23-dma";
 			reg = <0x01c02000 0x1000>;
 			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb1_gates 6>;
 			resets = <&ahb1_rst 6>;
 			#dma-cells = <1>;
 		};

 		mmc0: mmc@01c0f000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c0f000 0x1000>;
 			clocks = <&ahb1_gates 8>,
 				 <&mmc0_clk 0>,
 				 <&mmc0_clk 1>,
 				 <&mmc0_clk 2>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
 			resets = <&ahb1_rst 8>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};

 		mmc1: mmc@01c10000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c10000 0x1000>;
 			clocks = <&ahb1_gates 9>,
 				 <&mmc1_clk 0>,
 				 <&mmc1_clk 1>,
 				 <&mmc1_clk 2>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
 			resets = <&ahb1_rst 9>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};

 		mmc2: mmc@01c11000 {
 			compatible = "allwinner,sun5i-a13-mmc";
 			reg = <0x01c11000 0x1000>;
 			clocks = <&ahb1_gates 10>,
 				 <&mmc2_clk 0>,
 				 <&mmc2_clk 1>,
 				 <&mmc2_clk 2>;
 			clock-names = "ahb",
 				      "mmc",
 				      "output",
 				      "sample";
 			resets = <&ahb1_rst 10>;
 			reset-names = "ahb";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};

 		ehci0: usb@01c1a000 {
 			compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
 			reg = <0x01c1a000 0x100>;
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb1_gates 26>;
 			resets = <&ahb1_rst 26>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
 		};

 		ohci0: usb@01c1a400 {
 			compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
 			reg = <0x01c1a400 0x100>;
 			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ahb1_gates 29>, <&usb_clk 16>;
 			resets = <&ahb1_rst 29>;
 			phys = <&usbphy 1>;
 			phy-names = "usb";
 			status = "disabled";
 		};

 		pio: pinctrl@01c20800 {
 			/* compatible gets set in SoC specific dtsi file */
 			reg = <0x01c20800 0x400>;
 			/* interrupts get set in SoC specific dtsi file */
 			clocks = <&apb1_gates 5>;
 			gpio-controller;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#gpio-cells = <3>;

 			uart0_pins_a: uart0@0 {
 				allwinner,pins = "PF2", "PF4";
 				allwinner,function = "uart0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};

 			mmc0_pins_a: mmc0@0 {
 				allwinner,pins = "PF0", "PF1", "PF2",
 						 "PF3", "PF4", "PF5";
 				allwinner,function = "mmc0";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};

 			mmc1_pins_a: mmc1@0 {
 				allwinner,pins = "PG0", "PG1", "PG2",
 						 "PG3", "PG4", "PG5";
 				allwinner,function = "mmc1";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};

 			mmc2_8bit_pins: mmc2_8bit {
 				allwinner,pins = "PC5", "PC6", "PC8",
 						 "PC9", "PC10", "PC11",
 						 "PC12", "PC13", "PC14",
 						 "PC15";
 				allwinner,function = "mmc2";
 				allwinner,drive = <SUN4I_PINCTRL_30_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};

 			i2c0_pins_a: i2c0@0 {
 				allwinner,pins = "PH2", "PH3";
 				allwinner,function = "i2c0";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};

 			i2c1_pins_a: i2c1@0 {
 				allwinner,pins = "PH4", "PH5";
 				allwinner,function = "i2c1";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};

 			i2c2_pins_a: i2c2@0 {
 				allwinner,pins = "PE12", "PE13";
 				allwinner,function = "i2c2";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};

 		ahb1_rst: reset@01c202c0 {
 			#reset-cells = <1>;
 			compatible = "allwinner,sun6i-a31-clock-reset";
 			reg = <0x01c202c0 0xc>;
 		};

 		apb1_rst: reset@01c202d0 {
 			#reset-cells = <1>;
 			compatible = "allwinner,sun6i-a31-clock-reset";
 			reg = <0x01c202d0 0x4>;
 		};

 		apb2_rst: reset@01c202d8 {
 			#reset-cells = <1>;
 			compatible = "allwinner,sun6i-a31-clock-reset";
 			reg = <0x01c202d8 0x4>;
 		};

 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-a10-timer";
 			reg = <0x01c20c00 0xa0>;
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&osc24M>;
 		};

 		wdt0: watchdog@01c20ca0 {
 			compatible = "allwinner,sun6i-a31-wdt";
 			reg = <0x01c20ca0 0x20>;
 			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 		};

 		lradc: lradc@01c22800 {
 			compatible = "allwinner,sun4i-a10-lradc-keys";
 			reg = <0x01c22800 0x100>;
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};

 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 16>;
 			resets = <&apb2_rst 16>;
 			dmas = <&dma 6>, <&dma 6>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};

 		uart1: serial@01c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
 			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 17>;
 			resets = <&apb2_rst 17>;
 			dmas = <&dma 7>, <&dma 7>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};

 		uart2: serial@01c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
 			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 18>;
 			resets = <&apb2_rst 18>;
 			dmas = <&dma 8>, <&dma 8>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};

 		uart3: serial@01c28c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28c00 0x400>;
 			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 19>;
 			resets = <&apb2_rst 19>;
 			dmas = <&dma 9>, <&dma 9>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};

 		uart4: serial@01c29000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29000 0x400>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 20>;
 			resets = <&apb2_rst 20>;
 			dmas = <&dma 10>, <&dma 10>;
 			dma-names = "rx", "tx";
 			status = "disabled";
 		};

 		i2c0: i2c@01c2ac00 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2ac00 0x400>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb2_gates 0>;
 			resets = <&apb2_rst 0>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};

 		i2c1: i2c@01c2b000 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b000 0x400>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb2_gates 1>;
 			resets = <&apb2_rst 1>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};

 		i2c2: i2c@01c2b400 {
 			compatible = "allwinner,sun6i-a31-i2c";
 			reg = <0x01c2b400 0x400>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb2_gates 2>;
 			resets = <&apb2_rst 2>;
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};

 		gic: interrupt-controller@01c81000 {
 			compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
 			reg = <0x01c81000 0x1000>,
 			      <0x01c82000 0x1000>,
 			      <0x01c84000 0x2000>,
 			      <0x01c86000 0x2000>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};

 		rtc: rtc@01f00000 {
 			compatible = "allwinner,sun6i-a31-rtc";
 			reg = <0x01f00000 0x54>;
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 		};

 		prcm@01f01400 {
 			compatible = "allwinner,sun8i-a23-prcm";
 			reg = <0x01f01400 0x200>;

 			ar100: ar100_clk {
 				compatible = "fixed-factor-clock";
 				#clock-cells = <0>;
 				clock-div = <1>;
 				clock-mult = <1>;
 				clocks = <&osc24M>;
 				clock-output-names = "ar100";
 			};

 			ahb0: ahb0_clk {
 				compatible = "fixed-factor-clock";
 				#clock-cells = <0>;
 				clock-div = <1>;
 				clock-mult = <1>;
 				clocks = <&ar100>;
 				clock-output-names = "ahb0";
 			};

 			apb0: apb0_clk {
 				compatible = "allwinner,sun8i-a23-apb0-clk";
 				#clock-cells = <0>;
 				clocks = <&ahb0>;
 				clock-output-names = "apb0";
 			};

 			apb0_gates: apb0_gates_clk {
 				compatible = "allwinner,sun8i-a23-apb0-gates-clk";
 				#clock-cells = <1>;
 				clocks = <&apb0>;
 				clock-output-names = "apb0_pio", "apb0_timer",
 						"apb0_rsb", "apb0_uart",
 						"apb0_i2c";
 			};

 			apb0_rst: apb0_rst {
 				compatible = "allwinner,sun6i-a31-clock-reset";
 				#reset-cells = <1>;
 			};
 		};

 		cpucfg@01f01c00 {
 			compatible = "allwinner,sun8i-a23-cpuconfig";
 			reg = <0x01f01c00 0x300>;
 		};

 		r_uart: serial@01f02800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01f02800 0x400>;
 			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb0_gates 4>;
 			resets = <&apb0_rst 4>;
 			status = "disabled";
 		};

 		r_pio: pinctrl@01f02c00 {
 			compatible = "allwinner,sun8i-a23-r-pinctrl";
 			reg = <0x01f02c00 0x400>;
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&apb0_gates 0>;
 			resets = <&apb0_rst 0>;
 			gpio-controller;
 			interrupt-controller;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			#gpio-cells = <3>;

 			r_uart_pins_a: r_uart@0 {
 				allwinner,pins = "PL2", "PL3";
 				allwinner,function = "s_uart";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 		};
 	};
 };
	/*
	* Copyright 2014 Chen-Yu Tsai
	*
	* Chen-Yu Tsai <wens@csie.org>
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This file is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of the
	* License, or (at your option) any later version.
	*
	* This file is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* Or, alternatively,
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use,
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	#include "skeleton.dtsi"

	#include <dt-bindings/interrupt-controller/arm-gic.h>

	#include <dt-bindings/pinctrl/sun4i-a10.h>

	/ {
	interrupt-parent = <&gic>;

	chosen {
	#address-cells = <1>;
	#size-cells = <1>;
	ranges;

	framebuffer@0 {
	compatible = "allwinner,simple-framebuffer",
	"simple-framebuffer";
	allwinner,pipeline = "de_be0-lcd0";
	clocks = <&pll6 0>;
	status = "disabled";
	};
	};

	timer {
	compatible = "arm,armv7-timer";
	interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) \| IRQ_TYPE_LEVEL_LOW)>,
	<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) \| IRQ_TYPE_LEVEL_LOW)>,
	<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) \| IRQ_TYPE_LEVEL_LOW)>,
	<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) \| IRQ_TYPE_LEVEL_LOW)>;
	clock-frequency = <24000000>;
	arm,cpu-registers-not-fw-configured;
	};

	cpus {
	enable-method = "allwinner,sun8i-a23";
	#address-cells = <1>;
	#size-cells = <0>;

	cpu@0 {
	compatible = "arm,cortex-a7";
	device_type = "cpu";
	reg = <0>;
	};

	cpu@1 {
	compatible = "arm,cortex-a7";
	device_type = "cpu";
	reg = <1>;
	};
	};

	clocks {
	#address-cells = <1>;
	#size-cells = <1>;
	ranges;

	osc24M: osc24M_clk {
	#clock-cells = <0>;
	compatible = "fixed-clock";
	clock-frequency = <24000000>;
	clock-output-names = "osc24M";
	};

	osc32k: osc32k_clk {
	#clock-cells = <0>;
	compatible = "fixed-clock";
	clock-frequency = <32768>;
	clock-output-names = "osc32k";
	};

	pll1: clk@01c20000 {
	#clock-cells = <0>;
	compatible = "allwinner,sun8i-a23-pll1-clk";
	reg = <0x01c20000 0x4>;
	clocks = <&osc24M>;
	clock-output-names = "pll1";
	};

	/* dummy clock until actually implemented */
	pll5: pll5_clk {
	#clock-cells = <0>;
	compatible = "fixed-clock";
	clock-frequency = <0>;
	clock-output-names = "pll5";
	};

	pll6: clk@01c20028 {
	#clock-cells = <1>;
	compatible = "allwinner,sun6i-a31-pll6-clk";
	reg = <0x01c20028 0x4>;
	clocks = <&osc24M>;
	clock-output-names = "pll6", "pll6x2";
	};

	cpu: cpu_clk@01c20050 {
	#clock-cells = <0>;
	compatible = "allwinner,sun4i-a10-cpu-clk";
	reg = <0x01c20050 0x4>;

	/*
	* PLL1 is listed twice here.
	* While it looks suspicious, it's actually documented
	* that way both in the datasheet and in the code from
	* Allwinner.
	*/
	clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
	clock-output-names = "cpu";
	};

	axi: axi_clk@01c20050 {
	#clock-cells = <0>;
	compatible = "allwinner,sun8i-a23-axi-clk";
	reg = <0x01c20050 0x4>;
	clocks = <&cpu>;
	clock-output-names = "axi";
	};

	ahb1: ahb1_clk@01c20054 {
	#clock-cells = <0>;
	compatible = "allwinner,sun6i-a31-ahb1-clk";
	reg = <0x01c20054 0x4>;
	clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
	clock-output-names = "ahb1";
	};

	apb1: apb1_clk@01c20054 {
	#clock-cells = <0>;
	compatible = "allwinner,sun4i-a10-apb0-clk";
	reg = <0x01c20054 0x4>;
	clocks = <&ahb1>;
	clock-output-names = "apb1";
	};

	ahb1_gates: clk@01c20060 {
	#clock-cells = <1>;
	compatible = "allwinner,sun8i-a23-ahb1-gates-clk";
	reg = <0x01c20060 0x8>;
	clocks = <&ahb1>;
	clock-indices = <1>, <6>,
	<8>, <9>, <10>,
	<13>, <14>,
	<19>, <20>,
	<21>, <24>, <26>,
	<29>, <32>, <36>,
	<40>, <44>, <46>,
	<52>, <54>,
	<57>;
	clock-output-names = "ahb1_mipidsi", "ahb1_dma",
	"ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2",
	"ahb1_nand", "ahb1_sdram",
	"ahb1_hstimer", "ahb1_spi0",
	"ahb1_spi1", "ahb1_otg", "ahb1_ehci",
	"ahb1_ohci", "ahb1_ve", "ahb1_lcd",
	"ahb1_csi", "ahb1_be", "ahb1_fe",
	"ahb1_gpu", "ahb1_spinlock",
	"ahb1_drc";
	};

	apb1_gates: clk@01c20068 {
	#clock-cells = <1>;
	compatible = "allwinner,sun8i-a23-apb1-gates-clk";
	reg = <0x01c20068 0x4>;
	clocks = <&apb1>;
	clock-indices = <0>, <5>,
	<12>, <13>;
	clock-output-names = "apb1_codec", "apb1_pio",
	"apb1_daudio0", "apb1_daudio1";
	};

	apb2: clk@01c20058 {
	#clock-cells = <0>;
	compatible = "allwinner,sun4i-a10-apb1-clk";
	reg = <0x01c20058 0x4>;
	clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
	clock-output-names = "apb2";
	};

	apb2_gates: clk@01c2006c {
	#clock-cells = <1>;
	compatible = "allwinner,sun8i-a23-apb2-gates-clk";
	reg = <0x01c2006c 0x4>;
	clocks = <&apb2>;
	clock-indices = <0>, <1>,
	<2>, <16>,
	<17>, <18>,
	<19>, <20>;
	clock-output-names = "apb2_i2c0", "apb2_i2c1",
	"apb2_i2c2", "apb2_uart0",
	"apb2_uart1", "apb2_uart2",
	"apb2_uart3", "apb2_uart4";
	};

	mmc0_clk: clk@01c20088 {
	#clock-cells = <1>;
	compatible = "allwinner,sun4i-a10-mmc-clk";
	reg = <0x01c20088 0x4>;
	clocks = <&osc24M>, <&pll6 0>;
	clock-output-names = "mmc0",
	"mmc0_output",
	"mmc0_sample";
	};

	mmc1_clk: clk@01c2008c {
	#clock-cells = <1>;
	compatible = "allwinner,sun4i-a10-mmc-clk";
	reg = <0x01c2008c 0x4>;
	clocks = <&osc24M>, <&pll6 0>;
	clock-output-names = "mmc1",
	"mmc1_output",
	"mmc1_sample";
	};

	mmc2_clk: clk@01c20090 {
	#clock-cells = <1>;
	compatible = "allwinner,sun4i-a10-mmc-clk";
	reg = <0x01c20090 0x4>;
	clocks = <&osc24M>, <&pll6 0>;
	clock-output-names = "mmc2",
	"mmc2_output",
	"mmc2_sample";
	};

	usb_clk: clk@01c200cc {
	#clock-cells = <1>;
	#reset-cells = <1>;
	compatible = "allwinner,sun8i-a23-usb-clk";
	reg = <0x01c200cc 0x4>;
	clocks = <&osc24M>;
	clock-output-names = "usb_phy0", "usb_phy1", "usb_hsic",
	"usb_hsic_12M", "usb_ohci0";
	};
	};

	soc@01c00000 {
	compatible = "simple-bus";
	#address-cells = <1>;
	#size-cells = <1>;
	ranges;

	dma: dma-controller@01c02000 {
	compatible = "allwinner,sun8i-a23-dma";
	reg = <0x01c02000 0x1000>;
	interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&ahb1_gates 6>;
	resets = <&ahb1_rst 6>;
	#dma-cells = <1>;
	};

	mmc0: mmc@01c0f000 {
	compatible = "allwinner,sun5i-a13-mmc";
	reg = <0x01c0f000 0x1000>;
	clocks = <&ahb1_gates 8>,
	<&mmc0_clk 0>,
	<&mmc0_clk 1>,
	<&mmc0_clk 2>;
	clock-names = "ahb",
	"mmc",
	"output",
	"sample";
	resets = <&ahb1_rst 8>;
	reset-names = "ahb";
	interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	#address-cells = <1>;
	#size-cells = <0>;
	};

	mmc1: mmc@01c10000 {
	compatible = "allwinner,sun5i-a13-mmc";
	reg = <0x01c10000 0x1000>;
	clocks = <&ahb1_gates 9>,
	<&mmc1_clk 0>,
	<&mmc1_clk 1>,
	<&mmc1_clk 2>;
	clock-names = "ahb",
	"mmc",
	"output",
	"sample";
	resets = <&ahb1_rst 9>;
	reset-names = "ahb";
	interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	#address-cells = <1>;
	#size-cells = <0>;
	};

	mmc2: mmc@01c11000 {
	compatible = "allwinner,sun5i-a13-mmc";
	reg = <0x01c11000 0x1000>;
	clocks = <&ahb1_gates 10>,
	<&mmc2_clk 0>,
	<&mmc2_clk 1>,
	<&mmc2_clk 2>;
	clock-names = "ahb",
	"mmc",
	"output",
	"sample";
	resets = <&ahb1_rst 10>;
	reset-names = "ahb";
	interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	#address-cells = <1>;
	#size-cells = <0>;
	};

	ehci0: usb@01c1a000 {
	compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
	reg = <0x01c1a000 0x100>;
	interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&ahb1_gates 26>;
	resets = <&ahb1_rst 26>;
	phys = <&usbphy 1>;
	phy-names = "usb";
	status = "disabled";
	};

	ohci0: usb@01c1a400 {
	compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
	reg = <0x01c1a400 0x100>;
	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&ahb1_gates 29>, <&usb_clk 16>;
	resets = <&ahb1_rst 29>;
	phys = <&usbphy 1>;
	phy-names = "usb";
	status = "disabled";
	};

	pio: pinctrl@01c20800 {
	/* compatible gets set in SoC specific dtsi file */
	reg = <0x01c20800 0x400>;
	/* interrupts get set in SoC specific dtsi file */
	clocks = <&apb1_gates 5>;
	gpio-controller;
	interrupt-controller;
	#interrupt-cells = <3>;
	#gpio-cells = <3>;

	uart0_pins_a: uart0@0 {
	allwinner,pins = "PF2", "PF4";
	allwinner,function = "uart0";
	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	mmc0_pins_a: mmc0@0 {
	allwinner,pins = "PF0", "PF1", "PF2",
	"PF3", "PF4", "PF5";
	allwinner,function = "mmc0";
	allwinner,drive = <SUN4I_PINCTRL_30_MA>;
	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	mmc1_pins_a: mmc1@0 {
	allwinner,pins = "PG0", "PG1", "PG2",
	"PG3", "PG4", "PG5";
	allwinner,function = "mmc1";
	allwinner,drive = <SUN4I_PINCTRL_30_MA>;
	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	mmc2_8bit_pins: mmc2_8bit {
	allwinner,pins = "PC5", "PC6", "PC8",
	"PC9", "PC10", "PC11",
	"PC12", "PC13", "PC14",
	"PC15";
	allwinner,function = "mmc2";
	allwinner,drive = <SUN4I_PINCTRL_30_MA>;
	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	i2c0_pins_a: i2c0@0 {
	allwinner,pins = "PH2", "PH3";
	allwinner,function = "i2c0";
	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	i2c1_pins_a: i2c1@0 {
	allwinner,pins = "PH4", "PH5";
	allwinner,function = "i2c1";
	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};

	i2c2_pins_a: i2c2@0 {
	allwinner,pins = "PE12", "PE13";
	allwinner,function = "i2c2";
	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};
	};

	ahb1_rst: reset@01c202c0 {
	#reset-cells = <1>;
	compatible = "allwinner,sun6i-a31-clock-reset";
	reg = <0x01c202c0 0xc>;
	};

	apb1_rst: reset@01c202d0 {
	#reset-cells = <1>;
	compatible = "allwinner,sun6i-a31-clock-reset";
	reg = <0x01c202d0 0x4>;
	};

	apb2_rst: reset@01c202d8 {
	#reset-cells = <1>;
	compatible = "allwinner,sun6i-a31-clock-reset";
	reg = <0x01c202d8 0x4>;
	};

	timer@01c20c00 {
	compatible = "allwinner,sun4i-a10-timer";
	reg = <0x01c20c00 0xa0>;
	interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&osc24M>;
	};

	wdt0: watchdog@01c20ca0 {
	compatible = "allwinner,sun6i-a31-wdt";
	reg = <0x01c20ca0 0x20>;
	interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
	};

	lradc: lradc@01c22800 {
	compatible = "allwinner,sun4i-a10-lradc-keys";
	reg = <0x01c22800 0x100>;
	interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	};

	uart0: serial@01c28000 {
	compatible = "snps,dw-apb-uart";
	reg = <0x01c28000 0x400>;
	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
	reg-shift = <2>;
	reg-io-width = <4>;
	clocks = <&apb2_gates 16>;
	resets = <&apb2_rst 16>;
	dmas = <&dma 6>, <&dma 6>;
	dma-names = "rx", "tx";
	status = "disabled";
	};

	uart1: serial@01c28400 {
	compatible = "snps,dw-apb-uart";
	reg = <0x01c28400 0x400>;
	interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
	reg-shift = <2>;
	reg-io-width = <4>;
	clocks = <&apb2_gates 17>;
	resets = <&apb2_rst 17>;
	dmas = <&dma 7>, <&dma 7>;
	dma-names = "rx", "tx";
	status = "disabled";
	};

	uart2: serial@01c28800 {
	compatible = "snps,dw-apb-uart";
	reg = <0x01c28800 0x400>;
	interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
	reg-shift = <2>;
	reg-io-width = <4>;
	clocks = <&apb2_gates 18>;
	resets = <&apb2_rst 18>;
	dmas = <&dma 8>, <&dma 8>;
	dma-names = "rx", "tx";
	status = "disabled";
	};

	uart3: serial@01c28c00 {
	compatible = "snps,dw-apb-uart";
	reg = <0x01c28c00 0x400>;
	interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
	reg-shift = <2>;
	reg-io-width = <4>;
	clocks = <&apb2_gates 19>;
	resets = <&apb2_rst 19>;
	dmas = <&dma 9>, <&dma 9>;
	dma-names = "rx", "tx";
	status = "disabled";
	};

	uart4: serial@01c29000 {
	compatible = "snps,dw-apb-uart";
	reg = <0x01c29000 0x400>;
	interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
	reg-shift = <2>;
	reg-io-width = <4>;
	clocks = <&apb2_gates 20>;
	resets = <&apb2_rst 20>;
	dmas = <&dma 10>, <&dma 10>;
	dma-names = "rx", "tx";
	status = "disabled";
	};

	i2c0: i2c@01c2ac00 {
	compatible = "allwinner,sun6i-a31-i2c";
	reg = <0x01c2ac00 0x400>;
	interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&apb2_gates 0>;
	resets = <&apb2_rst 0>;
	status = "disabled";
	#address-cells = <1>;
	#size-cells = <0>;
	};

	i2c1: i2c@01c2b000 {
	compatible = "allwinner,sun6i-a31-i2c";
	reg = <0x01c2b000 0x400>;
	interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&apb2_gates 1>;
	resets = <&apb2_rst 1>;
	status = "disabled";
	#address-cells = <1>;
	#size-cells = <0>;
	};

	i2c2: i2c@01c2b400 {
	compatible = "allwinner,sun6i-a31-i2c";
	reg = <0x01c2b400 0x400>;
	interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&apb2_gates 2>;
	resets = <&apb2_rst 2>;
	status = "disabled";
	#address-cells = <1>;
	#size-cells = <0>;
	};

	gic: interrupt-controller@01c81000 {
	compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
	reg = <0x01c81000 0x1000>,
	<0x01c82000 0x1000>,
	<0x01c84000 0x2000>,
	<0x01c86000 0x2000>;
	interrupt-controller;
	#interrupt-cells = <3>;
	interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) \| IRQ_TYPE_LEVEL_HIGH)>;
	};

	rtc: rtc@01f00000 {
	compatible = "allwinner,sun6i-a31-rtc";
	reg = <0x01f00000 0x54>;
	interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
	};

	prcm@01f01400 {
	compatible = "allwinner,sun8i-a23-prcm";
	reg = <0x01f01400 0x200>;

	ar100: ar100_clk {
	compatible = "fixed-factor-clock";
	#clock-cells = <0>;
	clock-div = <1>;
	clock-mult = <1>;
	clocks = <&osc24M>;
	clock-output-names = "ar100";
	};

	ahb0: ahb0_clk {
	compatible = "fixed-factor-clock";
	#clock-cells = <0>;
	clock-div = <1>;
	clock-mult = <1>;
	clocks = <&ar100>;
	clock-output-names = "ahb0";
	};

	apb0: apb0_clk {
	compatible = "allwinner,sun8i-a23-apb0-clk";
	#clock-cells = <0>;
	clocks = <&ahb0>;
	clock-output-names = "apb0";
	};

	apb0_gates: apb0_gates_clk {
	compatible = "allwinner,sun8i-a23-apb0-gates-clk";
	#clock-cells = <1>;
	clocks = <&apb0>;
	clock-output-names = "apb0_pio", "apb0_timer",
	"apb0_rsb", "apb0_uart",
	"apb0_i2c";
	};

	apb0_rst: apb0_rst {
	compatible = "allwinner,sun6i-a31-clock-reset";
	#reset-cells = <1>;
	};
	};

	cpucfg@01f01c00 {
	compatible = "allwinner,sun8i-a23-cpuconfig";
	reg = <0x01f01c00 0x300>;
	};

	r_uart: serial@01f02800 {
	compatible = "snps,dw-apb-uart";
	reg = <0x01f02800 0x400>;
	interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
	reg-shift = <2>;
	reg-io-width = <4>;
	clocks = <&apb0_gates 4>;
	resets = <&apb0_rst 4>;
	status = "disabled";
	};

	r_pio: pinctrl@01f02c00 {
	compatible = "allwinner,sun8i-a23-r-pinctrl";
	reg = <0x01f02c00 0x400>;
	interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&apb0_gates 0>;
	resets = <&apb0_rst 0>;
	gpio-controller;
	interrupt-controller;
	#address-cells = <1>;
	#size-cells = <0>;
	#gpio-cells = <3>;

	r_uart_pins_a: r_uart@0 {
	allwinner,pins = "PL2", "PL3";
	allwinner,function = "s_uart";
	allwinner,drive = <SUN4I_PINCTRL_10_MA>;
	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
	};
	};
	};
	};