canfd: add new data structures and constants
- add new struct canfd_frame
- check identical element offsets in struct can_frame and struct canfd_frame
- new ETH_P_CANFD definition to tag CAN FD skbs correctly
- add CAN_MTU and CANFD_MTU definitions for easy frame and mode detection
- add CAN[FD]_MAX_[DLC|DLEN] helper constants to remove hard coded values
- update existing struct can_frame with helper constants and comments
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
diff --git a/include/linux/can.h b/include/linux/can.h
index 17334c0..1a66cf61 100644
--- a/include/linux/can.h
+++ b/include/linux/can.h
@@ -46,18 +46,67 @@
*/
typedef __u32 can_err_mask_t;
+/* CAN payload length and DLC definitions according to ISO 11898-1 */
+#define CAN_MAX_DLC 8
+#define CAN_MAX_DLEN 8
+
+/* CAN FD payload length and DLC definitions according to ISO 11898-7 */
+#define CANFD_MAX_DLC 15
+#define CANFD_MAX_DLEN 64
+
/**
* struct can_frame - basic CAN frame structure
- * @can_id: the CAN ID of the frame and CAN_*_FLAG flags, see above.
- * @can_dlc: the data length field of the CAN frame
- * @data: the CAN frame payload.
+ * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition
+ * @can_dlc: frame payload length in byte (0 .. 8) aka data length code
+ * N.B. the DLC field from ISO 11898-1 Chapter 8.4.2.3 has a 1:1
+ * mapping of the 'data length code' to the real payload length
+ * @data: CAN frame payload (up to 8 byte)
*/
struct can_frame {
canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */
- __u8 can_dlc; /* data length code: 0 .. 8 */
- __u8 data[8] __attribute__((aligned(8)));
+ __u8 can_dlc; /* frame payload length in byte (0 .. CAN_MAX_DLEN) */
+ __u8 data[CAN_MAX_DLEN] __attribute__((aligned(8)));
};
+/*
+ * defined bits for canfd_frame.flags
+ *
+ * As the default for CAN FD should be to support the high data rate in the
+ * payload section of the frame (HDR) and to support up to 64 byte in the
+ * data section (EDL) the bits are only set in the non-default case.
+ * Btw. as long as there's no real implementation for CAN FD network driver
+ * these bits are only preliminary.
+ *
+ * RX: NOHDR/NOEDL - info about received CAN FD frame
+ * ESI - bit from originating CAN controller
+ * TX: NOHDR/NOEDL - control per-frame settings if supported by CAN controller
+ * ESI - bit is set by local CAN controller
+ */
+#define CANFD_NOHDR 0x01 /* frame without high data rate */
+#define CANFD_NOEDL 0x02 /* frame without extended data length */
+#define CANFD_ESI 0x04 /* error state indicator */
+
+/**
+ * struct canfd_frame - CAN flexible data rate frame structure
+ * @can_id: CAN ID of the frame and CAN_*_FLAG flags, see canid_t definition
+ * @len: frame payload length in byte (0 .. CANFD_MAX_DLEN)
+ * @flags: additional flags for CAN FD
+ * @__res0: reserved / padding
+ * @__res1: reserved / padding
+ * @data: CAN FD frame payload (up to CANFD_MAX_DLEN byte)
+ */
+struct canfd_frame {
+ canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */
+ __u8 len; /* frame payload length in byte */
+ __u8 flags; /* additional flags for CAN FD */
+ __u8 __res0; /* reserved / padding */
+ __u8 __res1; /* reserved / padding */
+ __u8 data[CANFD_MAX_DLEN] __attribute__((aligned(8)));
+};
+
+#define CAN_MTU (sizeof(struct can_frame))
+#define CANFD_MTU (sizeof(struct canfd_frame))
+
/* particular protocols of the protocol family PF_CAN */
#define CAN_RAW 1 /* RAW sockets */
#define CAN_BCM 2 /* Broadcast Manager */