| /* |
| * Texas Instruments TLV320AIC26 low power audio CODEC |
| * ALSA SoC CODEC driver |
| * |
| * Copyright (C) 2008 Secret Lab Technologies Ltd. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/pm.h> |
| #include <linux/device.h> |
| #include <linux/sysfs.h> |
| #include <linux/spi/spi.h> |
| #include <linux/slab.h> |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/soc.h> |
| #include <sound/soc-dapm.h> |
| #include <sound/initval.h> |
| |
| #include "tlv320aic26.h" |
| |
| MODULE_DESCRIPTION("ASoC TLV320AIC26 codec driver"); |
| MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); |
| MODULE_LICENSE("GPL"); |
| |
| /* AIC26 driver private data */ |
| struct aic26 { |
| struct spi_device *spi; |
| struct snd_soc_codec codec; |
| u16 reg_cache[AIC26_NUM_REGS]; /* shadow registers */ |
| int master; |
| int datfm; |
| int mclk; |
| |
| /* Keyclick parameters */ |
| int keyclick_amplitude; |
| int keyclick_freq; |
| int keyclick_len; |
| }; |
| |
| /* --------------------------------------------------------------------- |
| * Register access routines |
| */ |
| static unsigned int aic26_reg_read(struct snd_soc_codec *codec, |
| unsigned int reg) |
| { |
| struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec); |
| u16 *cache = codec->reg_cache; |
| u16 cmd, value; |
| u8 buffer[2]; |
| int rc; |
| |
| if (reg >= AIC26_NUM_REGS) { |
| WARN_ON_ONCE(1); |
| return 0; |
| } |
| |
| /* Do SPI transfer; first 16bits are command; remaining is |
| * register contents */ |
| cmd = AIC26_READ_COMMAND_WORD(reg); |
| buffer[0] = (cmd >> 8) & 0xff; |
| buffer[1] = cmd & 0xff; |
| rc = spi_write_then_read(aic26->spi, buffer, 2, buffer, 2); |
| if (rc) { |
| dev_err(&aic26->spi->dev, "AIC26 reg read error\n"); |
| return -EIO; |
| } |
| value = (buffer[0] << 8) | buffer[1]; |
| |
| /* Update the cache before returning with the value */ |
| cache[reg] = value; |
| return value; |
| } |
| |
| static unsigned int aic26_reg_read_cache(struct snd_soc_codec *codec, |
| unsigned int reg) |
| { |
| u16 *cache = codec->reg_cache; |
| |
| if (reg >= AIC26_NUM_REGS) { |
| WARN_ON_ONCE(1); |
| return 0; |
| } |
| |
| return cache[reg]; |
| } |
| |
| static int aic26_reg_write(struct snd_soc_codec *codec, unsigned int reg, |
| unsigned int value) |
| { |
| struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec); |
| u16 *cache = codec->reg_cache; |
| u16 cmd; |
| u8 buffer[4]; |
| int rc; |
| |
| if (reg >= AIC26_NUM_REGS) { |
| WARN_ON_ONCE(1); |
| return -EINVAL; |
| } |
| |
| /* Do SPI transfer; first 16bits are command; remaining is data |
| * to write into register */ |
| cmd = AIC26_WRITE_COMMAND_WORD(reg); |
| buffer[0] = (cmd >> 8) & 0xff; |
| buffer[1] = cmd & 0xff; |
| buffer[2] = value >> 8; |
| buffer[3] = value; |
| rc = spi_write(aic26->spi, buffer, 4); |
| if (rc) { |
| dev_err(&aic26->spi->dev, "AIC26 reg read error\n"); |
| return -EIO; |
| } |
| |
| /* update cache before returning */ |
| cache[reg] = value; |
| return 0; |
| } |
| |
| /* --------------------------------------------------------------------- |
| * Digital Audio Interface Operations |
| */ |
| static int aic26_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct snd_soc_codec *codec = rtd->codec; |
| struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec); |
| int fsref, divisor, wlen, pval, jval, dval, qval; |
| u16 reg; |
| |
| dev_dbg(&aic26->spi->dev, "aic26_hw_params(substream=%p, params=%p)\n", |
| substream, params); |
| dev_dbg(&aic26->spi->dev, "rate=%i format=%i\n", params_rate(params), |
| params_format(params)); |
| |
| switch (params_rate(params)) { |
| case 8000: fsref = 48000; divisor = AIC26_DIV_6; break; |
| case 11025: fsref = 44100; divisor = AIC26_DIV_4; break; |
| case 12000: fsref = 48000; divisor = AIC26_DIV_4; break; |
| case 16000: fsref = 48000; divisor = AIC26_DIV_3; break; |
| case 22050: fsref = 44100; divisor = AIC26_DIV_2; break; |
| case 24000: fsref = 48000; divisor = AIC26_DIV_2; break; |
| case 32000: fsref = 48000; divisor = AIC26_DIV_1_5; break; |
| case 44100: fsref = 44100; divisor = AIC26_DIV_1; break; |
| case 48000: fsref = 48000; divisor = AIC26_DIV_1; break; |
| default: |
| dev_dbg(&aic26->spi->dev, "bad rate\n"); return -EINVAL; |
| } |
| |
| /* select data word length */ |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S8: wlen = AIC26_WLEN_16; break; |
| case SNDRV_PCM_FORMAT_S16_BE: wlen = AIC26_WLEN_16; break; |
| case SNDRV_PCM_FORMAT_S24_BE: wlen = AIC26_WLEN_24; break; |
| case SNDRV_PCM_FORMAT_S32_BE: wlen = AIC26_WLEN_32; break; |
| default: |
| dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL; |
| } |
| |
| /* Configure PLL */ |
| pval = 1; |
| jval = (fsref == 44100) ? 7 : 8; |
| dval = (fsref == 44100) ? 5264 : 1920; |
| qval = 0; |
| reg = 0x8000 | qval << 11 | pval << 8 | jval << 2; |
| aic26_reg_write(codec, AIC26_REG_PLL_PROG1, reg); |
| reg = dval << 2; |
| aic26_reg_write(codec, AIC26_REG_PLL_PROG2, reg); |
| |
| /* Audio Control 3 (master mode, fsref rate) */ |
| reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL3); |
| reg &= ~0xf800; |
| if (aic26->master) |
| reg |= 0x0800; |
| if (fsref == 48000) |
| reg |= 0x2000; |
| aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL3, reg); |
| |
| /* Audio Control 1 (FSref divisor) */ |
| reg = aic26_reg_read_cache(codec, AIC26_REG_AUDIO_CTRL1); |
| reg &= ~0x0fff; |
| reg |= wlen | aic26->datfm | (divisor << 3) | divisor; |
| aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL1, reg); |
| |
| return 0; |
| } |
| |
| /** |
| * aic26_mute - Mute control to reduce noise when changing audio format |
| */ |
| static int aic26_mute(struct snd_soc_dai *dai, int mute) |
| { |
| struct snd_soc_codec *codec = dai->codec; |
| struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec); |
| u16 reg = aic26_reg_read_cache(codec, AIC26_REG_DAC_GAIN); |
| |
| dev_dbg(&aic26->spi->dev, "aic26_mute(dai=%p, mute=%i)\n", |
| dai, mute); |
| |
| if (mute) |
| reg |= 0x8080; |
| else |
| reg &= ~0x8080; |
| aic26_reg_write(codec, AIC26_REG_DAC_GAIN, reg); |
| |
| return 0; |
| } |
| |
| static int aic26_set_sysclk(struct snd_soc_dai *codec_dai, |
| int clk_id, unsigned int freq, int dir) |
| { |
| struct snd_soc_codec *codec = codec_dai->codec; |
| struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec); |
| |
| dev_dbg(&aic26->spi->dev, "aic26_set_sysclk(dai=%p, clk_id==%i," |
| " freq=%i, dir=%i)\n", |
| codec_dai, clk_id, freq, dir); |
| |
| /* MCLK needs to fall between 2MHz and 50 MHz */ |
| if ((freq < 2000000) || (freq > 50000000)) |
| return -EINVAL; |
| |
| aic26->mclk = freq; |
| return 0; |
| } |
| |
| static int aic26_set_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) |
| { |
| struct snd_soc_codec *codec = codec_dai->codec; |
| struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec); |
| |
| dev_dbg(&aic26->spi->dev, "aic26_set_fmt(dai=%p, fmt==%i)\n", |
| codec_dai, fmt); |
| |
| /* set master/slave audio interface */ |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBM_CFM: aic26->master = 1; break; |
| case SND_SOC_DAIFMT_CBS_CFS: aic26->master = 0; break; |
| default: |
| dev_dbg(&aic26->spi->dev, "bad master\n"); return -EINVAL; |
| } |
| |
| /* interface format */ |
| switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { |
| case SND_SOC_DAIFMT_I2S: aic26->datfm = AIC26_DATFM_I2S; break; |
| case SND_SOC_DAIFMT_DSP_A: aic26->datfm = AIC26_DATFM_DSP; break; |
| case SND_SOC_DAIFMT_RIGHT_J: aic26->datfm = AIC26_DATFM_RIGHTJ; break; |
| case SND_SOC_DAIFMT_LEFT_J: aic26->datfm = AIC26_DATFM_LEFTJ; break; |
| default: |
| dev_dbg(&aic26->spi->dev, "bad format\n"); return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* --------------------------------------------------------------------- |
| * Digital Audio Interface Definition |
| */ |
| #define AIC26_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ |
| SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ |
| SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ |
| SNDRV_PCM_RATE_48000) |
| #define AIC26_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |\ |
| SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE) |
| |
| static struct snd_soc_dai_ops aic26_dai_ops = { |
| .hw_params = aic26_hw_params, |
| .digital_mute = aic26_mute, |
| .set_sysclk = aic26_set_sysclk, |
| .set_fmt = aic26_set_fmt, |
| }; |
| |
| static struct snd_soc_dai_driver aic26_dai = { |
| .name = "tlv320aic26-hifi", |
| .playback = { |
| .stream_name = "Playback", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = AIC26_RATES, |
| .formats = AIC26_FORMATS, |
| }, |
| .capture = { |
| .stream_name = "Capture", |
| .channels_min = 2, |
| .channels_max = 2, |
| .rates = AIC26_RATES, |
| .formats = AIC26_FORMATS, |
| }, |
| .ops = &aic26_dai_ops, |
| }; |
| |
| /* --------------------------------------------------------------------- |
| * ALSA controls |
| */ |
| static const char *aic26_capture_src_text[] = {"Mic", "Aux"}; |
| static const struct soc_enum aic26_capture_src_enum = |
| SOC_ENUM_SINGLE(AIC26_REG_AUDIO_CTRL1, 12, 2, aic26_capture_src_text); |
| |
| static const struct snd_kcontrol_new aic26_snd_controls[] = { |
| /* Output */ |
| SOC_DOUBLE("PCM Playback Volume", AIC26_REG_DAC_GAIN, 8, 0, 0x7f, 1), |
| SOC_DOUBLE("PCM Playback Switch", AIC26_REG_DAC_GAIN, 15, 7, 1, 1), |
| SOC_SINGLE("PCM Capture Volume", AIC26_REG_ADC_GAIN, 8, 0x7f, 0), |
| SOC_SINGLE("PCM Capture Mute", AIC26_REG_ADC_GAIN, 15, 1, 1), |
| SOC_SINGLE("Keyclick activate", AIC26_REG_AUDIO_CTRL2, 15, 0x1, 0), |
| SOC_SINGLE("Keyclick amplitude", AIC26_REG_AUDIO_CTRL2, 12, 0x7, 0), |
| SOC_SINGLE("Keyclick frequency", AIC26_REG_AUDIO_CTRL2, 8, 0x7, 0), |
| SOC_SINGLE("Keyclick period", AIC26_REG_AUDIO_CTRL2, 4, 0xf, 0), |
| SOC_ENUM("Capture Source", aic26_capture_src_enum), |
| }; |
| |
| /* --------------------------------------------------------------------- |
| * SPI device portion of driver: sysfs files for debugging |
| */ |
| |
| static ssize_t aic26_keyclick_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct aic26 *aic26 = dev_get_drvdata(dev); |
| int val, amp, freq, len; |
| |
| val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2); |
| amp = (val >> 12) & 0x7; |
| freq = (125 << ((val >> 8) & 0x7)) >> 1; |
| len = 2 * (1 + ((val >> 4) & 0xf)); |
| |
| return sprintf(buf, "amp=%x freq=%iHz len=%iclks\n", amp, freq, len); |
| } |
| |
| /* Any write to the keyclick attribute will trigger the keyclick event */ |
| static ssize_t aic26_keyclick_set(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct aic26 *aic26 = dev_get_drvdata(dev); |
| int val; |
| |
| val = aic26_reg_read_cache(&aic26->codec, AIC26_REG_AUDIO_CTRL2); |
| val |= 0x8000; |
| aic26_reg_write(&aic26->codec, AIC26_REG_AUDIO_CTRL2, val); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(keyclick, 0644, aic26_keyclick_show, aic26_keyclick_set); |
| |
| /* --------------------------------------------------------------------- |
| * SoC CODEC portion of driver: probe and release routines |
| */ |
| static int aic26_probe(struct snd_soc_codec *codec) |
| { |
| struct aic26 *aic26 = snd_soc_codec_get_drvdata(codec); |
| int ret, err, i, reg; |
| |
| dev_info(codec->dev, "Probing AIC26 SoC CODEC driver\n"); |
| |
| /* Reset the codec to power on defaults */ |
| aic26_reg_write(codec, AIC26_REG_RESET, 0xBB00); |
| |
| /* Power up CODEC */ |
| aic26_reg_write(codec, AIC26_REG_POWER_CTRL, 0); |
| |
| /* Audio Control 3 (master mode, fsref rate) */ |
| reg = aic26_reg_read(codec, AIC26_REG_AUDIO_CTRL3); |
| reg &= ~0xf800; |
| reg |= 0x0800; /* set master mode */ |
| aic26_reg_write(codec, AIC26_REG_AUDIO_CTRL3, reg); |
| |
| /* Fill register cache */ |
| for (i = 0; i < ARRAY_SIZE(aic26->reg_cache); i++) |
| aic26_reg_read(codec, i); |
| |
| /* Register the sysfs files for debugging */ |
| /* Create SysFS files */ |
| ret = device_create_file(codec->dev, &dev_attr_keyclick); |
| if (ret) |
| dev_info(codec->dev, "error creating sysfs files\n"); |
| |
| /* register controls */ |
| dev_dbg(codec->dev, "Registering controls\n"); |
| err = snd_soc_add_controls(codec, aic26_snd_controls, |
| ARRAY_SIZE(aic26_snd_controls)); |
| WARN_ON(err < 0); |
| |
| return 0; |
| } |
| |
| static struct snd_soc_codec_driver aic26_soc_codec_dev = { |
| .probe = aic26_probe, |
| .read = aic26_reg_read, |
| .write = aic26_reg_write, |
| .reg_cache_size = AIC26_NUM_REGS, |
| .reg_word_size = sizeof(u16), |
| }; |
| |
| /* --------------------------------------------------------------------- |
| * SPI device portion of driver: probe and release routines and SPI |
| * driver registration. |
| */ |
| static int aic26_spi_probe(struct spi_device *spi) |
| { |
| struct aic26 *aic26; |
| int ret; |
| |
| dev_dbg(&spi->dev, "probing tlv320aic26 spi device\n"); |
| |
| /* Allocate driver data */ |
| aic26 = kzalloc(sizeof *aic26, GFP_KERNEL); |
| if (!aic26) |
| return -ENOMEM; |
| |
| /* Initialize the driver data */ |
| aic26->spi = spi; |
| dev_set_drvdata(&spi->dev, aic26); |
| aic26->master = 1; |
| |
| ret = snd_soc_register_codec(&spi->dev, |
| &aic26_soc_codec_dev, &aic26_dai, 1); |
| if (ret < 0) |
| kfree(aic26); |
| return ret; |
| |
| dev_dbg(&spi->dev, "SPI device initialized\n"); |
| return 0; |
| } |
| |
| static int aic26_spi_remove(struct spi_device *spi) |
| { |
| snd_soc_unregister_codec(&spi->dev); |
| kfree(spi_get_drvdata(spi)); |
| return 0; |
| } |
| |
| static struct spi_driver aic26_spi = { |
| .driver = { |
| .name = "tlv320aic26-codec", |
| .owner = THIS_MODULE, |
| }, |
| .probe = aic26_spi_probe, |
| .remove = aic26_spi_remove, |
| }; |
| |
| static int __init aic26_init(void) |
| { |
| return spi_register_driver(&aic26_spi); |
| } |
| module_init(aic26_init); |
| |
| static void __exit aic26_exit(void) |
| { |
| spi_unregister_driver(&aic26_spi); |
| } |
| module_exit(aic26_exit); |