arch/xtensa/Kconfig - kernel/msm-4.19 - Gitiles

 config FRAME_POINTER
 	def_bool n

 config ZONE_DMA
 	def_bool y

 config XTENSA
 	def_bool y
 	select HAVE_IDE
 	select GENERIC_ATOMIC64
 	select HAVE_GENERIC_HARDIRQS
 	select HAVE_VIRT_TO_BUS
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES
 	select MODULES_USE_ELF_RELA
 	select GENERIC_PCI_IOMAP
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select CLONE_BACKWARDS
 	select IRQ_DOMAIN
 	select HAVE_OPROFILE
 	help
 	  Xtensa processors are 32-bit RISC machines designed by Tensilica
 	  primarily for embedded systems.  These processors are both
 	  configurable and extensible.  The Linux port to the Xtensa
 	  architecture supports all processor configurations and extensions,
 	  with reasonable minimum requirements.  The Xtensa Linux project has
 	  a home page at <http://www.linux-xtensa.org/>.

 config RWSEM_XCHGADD_ALGORITHM
 	def_bool y

 config GENERIC_HWEIGHT
 	def_bool y

 config GENERIC_GPIO
 	bool

 config ARCH_HAS_ILOG2_U32
 	def_bool n

 config ARCH_HAS_ILOG2_U64
 	def_bool n

 config NO_IOPORT
 	def_bool n

 config HZ
 	int
 	default 100

 source "init/Kconfig"
 source "kernel/Kconfig.freezer"

 config MMU
 	def_bool n

 config VARIANT_IRQ_SWITCH
 	def_bool n

 menu "Processor type and features"

 choice
 	prompt "Xtensa Processor Configuration"
 	default XTENSA_VARIANT_FSF

 config XTENSA_VARIANT_FSF
 	bool "fsf - default (not generic) configuration"
 	select MMU

 config XTENSA_VARIANT_DC232B
 	bool "dc232b - Diamond 232L Standard Core Rev.B (LE)"
 	select MMU
 	help
 	  This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE).

 config XTENSA_VARIANT_DC233C
 	bool "dc233c - Diamond 233L Standard Core Rev.C (LE)"
 	select MMU
 	help
 	  This variant refers to Tensilica's Diamond 233L Standard core Rev.C (LE).

 config XTENSA_VARIANT_S6000
 	bool "s6000 - Stretch software configurable processor"
 	select VARIANT_IRQ_SWITCH
 	select ARCH_REQUIRE_GPIOLIB
 	select XTENSA_CALIBRATE_CCOUNT
 endchoice

 config XTENSA_UNALIGNED_USER
 	bool "Unaligned memory access in use space"
 	help
 	  The Xtensa architecture currently does not handle unaligned
 	  memory accesses in hardware but through an exception handler.
 	  Per default, unaligned memory accesses are disabled in user space.

 	  Say Y here to enable unaligned memory access in user space.

 source "kernel/Kconfig.preempt"

 config MATH_EMULATION
 	bool "Math emulation"
 	help
 	Can we use information of configuration file?

 endmenu

 config XTENSA_CALIBRATE_CCOUNT
 	def_bool n
 	help
 	  On some platforms (XT2000, for example), the CPU clock rate can
 	  vary.  The frequency can be determined, however, by measuring
 	  against a well known, fixed frequency, such as an UART oscillator.

 config SERIAL_CONSOLE
 	def_bool n

 config XTENSA_ISS_NETWORK
 	def_bool n

 menu "Bus options"

 config PCI
 	bool "PCI support"
 	default y
 	help
 	  Find out whether you have a PCI motherboard. PCI is the name of a
 	  bus system, i.e. the way the CPU talks to the other stuff inside
 	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
 	  VESA. If you have PCI, say Y, otherwise N.

 source "drivers/pci/Kconfig"

 endmenu

 menu "Platform options"

 choice
 	prompt "Xtensa System Type"
 	default XTENSA_PLATFORM_ISS

 config XTENSA_PLATFORM_ISS
 	bool "ISS"
 	depends on TTY
 	select XTENSA_CALIBRATE_CCOUNT
 	select SERIAL_CONSOLE
 	select XTENSA_ISS_NETWORK
 	help
 	  ISS is an acronym for Tensilica's Instruction Set Simulator.

 config XTENSA_PLATFORM_XT2000
 	bool "XT2000"
 	help
 	  XT2000 is the name of Tensilica's feature-rich emulation platform.
 	  This hardware is capable of running a full Linux distribution.

 config XTENSA_PLATFORM_S6105
 	bool "S6105"
 	select SERIAL_CONSOLE
 	select NO_IOPORT

 config XTENSA_PLATFORM_XTFPGA
 	bool "XTFPGA"
 	select SERIAL_CONSOLE
 	select ETHOC
 	select XTENSA_CALIBRATE_CCOUNT
 	help
 	  XTFPGA is the name of Tensilica board family (LX60, LX110, LX200, ML605).
 	  This hardware is capable of running a full Linux distribution.

 endchoice


 config XTENSA_CPU_CLOCK
 	int "CPU clock rate [MHz]"
 	depends on !XTENSA_CALIBRATE_CCOUNT
 	default 16

 config GENERIC_CALIBRATE_DELAY
 	bool "Auto calibration of the BogoMIPS value"
 	help
 	  The BogoMIPS value can easily be derived from the CPU frequency.

 config CMDLINE_BOOL
 	bool "Default bootloader kernel arguments"

 config CMDLINE
 	string "Initial kernel command string"
 	depends on CMDLINE_BOOL
 	default "console=ttyS0,38400 root=/dev/ram"
 	help
 	  On some architectures (EBSA110 and CATS), there is currently no way
 	  for the boot loader to pass arguments to the kernel. For these
 	  architectures, you should supply some command-line options at build
 	  time by entering them here. As a minimum, you should specify the
 	  memory size and the root device (e.g., mem=64M root=/dev/nfs).

 config USE_OF
 	bool "Flattened Device Tree support"
 	select OF
 	select OF_EARLY_FLATTREE
 	help
 	  Include support for flattened device tree machine descriptions.

 config BUILTIN_DTB
 	string "DTB to build into the kernel image"
 	depends on OF

 config BLK_DEV_SIMDISK
 	tristate "Host file-based simulated block device support"
 	default n
 	depends on XTENSA_PLATFORM_ISS
 	help
 	  Create block devices that map to files in the host file system.
 	  Device binding to host file may be changed at runtime via proc
 	  interface provided the device is not in use.

 config BLK_DEV_SIMDISK_COUNT
 	int "Number of host file-based simulated block devices"
 	range 1 10
 	depends on BLK_DEV_SIMDISK
 	default 2
 	help
 	  This is the default minimal number of created block devices.
 	  Kernel/module parameter 'simdisk_count' may be used to change this
 	  value at runtime. More file names (but no more than 10) may be
 	  specified as parameters, simdisk_count grows accordingly.

 config SIMDISK0_FILENAME
 	string "Host filename for the first simulated device"
 	depends on BLK_DEV_SIMDISK = y
 	default ""
 	help
 	  Attach a first simdisk to a host file. Conventionally, this file
 	  contains a root file system.

 config SIMDISK1_FILENAME
 	string "Host filename for the second simulated device"
 	depends on BLK_DEV_SIMDISK = y && BLK_DEV_SIMDISK_COUNT != 1
 	default ""
 	help
 	  Another simulated disk in a host file for a buildroot-independent
 	  storage.

 source "mm/Kconfig"

 source "drivers/pcmcia/Kconfig"

 source "drivers/pci/hotplug/Kconfig"

 endmenu

 menu "Executable file formats"

 # only elf supported
 config KCORE_ELF
 	def_bool y
         depends on PROC_FS
         help
           If you enabled support for /proc file system then the file
           /proc/kcore will contain the kernel core image in ELF format. This
           can be used in gdb:

           $ cd /usr/src/linux ; gdb vmlinux /proc/kcore

           This is especially useful if you have compiled the kernel with the
           "-g" option to preserve debugging information. It is mainly used
 	  for examining kernel data structures on the live kernel.

 source "fs/Kconfig.binfmt"

 endmenu

 source "net/Kconfig"

 source "drivers/Kconfig"

 source "fs/Kconfig"

 source "arch/xtensa/Kconfig.debug"

 source "security/Kconfig"

 source "crypto/Kconfig"

 source "lib/Kconfig"
	config FRAME_POINTER
	def_bool n

	config ZONE_DMA
	def_bool y

	config XTENSA
	def_bool y
	select HAVE_IDE
	select GENERIC_ATOMIC64
	select HAVE_GENERIC_HARDIRQS
	select HAVE_VIRT_TO_BUS
	select GENERIC_IRQ_SHOW
	select GENERIC_CPU_DEVICES
	select MODULES_USE_ELF_RELA
	select GENERIC_PCI_IOMAP
	select ARCH_WANT_IPC_PARSE_VERSION
	select ARCH_WANT_OPTIONAL_GPIOLIB
	select CLONE_BACKWARDS
	select IRQ_DOMAIN
	select HAVE_OPROFILE
	help
	Xtensa processors are 32-bit RISC machines designed by Tensilica
	primarily for embedded systems. These processors are both
	configurable and extensible. The Linux port to the Xtensa
	architecture supports all processor configurations and extensions,
	with reasonable minimum requirements. The Xtensa Linux project has
	a home page at <http://www.linux-xtensa.org/>.

	config RWSEM_XCHGADD_ALGORITHM
	def_bool y

	config GENERIC_HWEIGHT
	def_bool y

	config GENERIC_GPIO
	bool

	config ARCH_HAS_ILOG2_U32
	def_bool n

	config ARCH_HAS_ILOG2_U64
	def_bool n

	config NO_IOPORT
	def_bool n

	config HZ
	int
	default 100

	source "init/Kconfig"
	source "kernel/Kconfig.freezer"

	config MMU
	def_bool n

	config VARIANT_IRQ_SWITCH
	def_bool n

	menu "Processor type and features"

	choice
	prompt "Xtensa Processor Configuration"
	default XTENSA_VARIANT_FSF

	config XTENSA_VARIANT_FSF
	bool "fsf - default (not generic) configuration"
	select MMU

	config XTENSA_VARIANT_DC232B
	bool "dc232b - Diamond 232L Standard Core Rev.B (LE)"
	select MMU
	help
	This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE).

	config XTENSA_VARIANT_DC233C
	bool "dc233c - Diamond 233L Standard Core Rev.C (LE)"
	select MMU
	help
	This variant refers to Tensilica's Diamond 233L Standard core Rev.C (LE).

	config XTENSA_VARIANT_S6000
	bool "s6000 - Stretch software configurable processor"
	select VARIANT_IRQ_SWITCH
	select ARCH_REQUIRE_GPIOLIB
	select XTENSA_CALIBRATE_CCOUNT
	endchoice

	config XTENSA_UNALIGNED_USER
	bool "Unaligned memory access in use space"
	help
	The Xtensa architecture currently does not handle unaligned
	memory accesses in hardware but through an exception handler.
	Per default, unaligned memory accesses are disabled in user space.

	Say Y here to enable unaligned memory access in user space.

	source "kernel/Kconfig.preempt"

	config MATH_EMULATION
	bool "Math emulation"
	help
	Can we use information of configuration file?

	endmenu

	config XTENSA_CALIBRATE_CCOUNT
	def_bool n
	help
	On some platforms (XT2000, for example), the CPU clock rate can
	vary. The frequency can be determined, however, by measuring
	against a well known, fixed frequency, such as an UART oscillator.

	config SERIAL_CONSOLE
	def_bool n

	config XTENSA_ISS_NETWORK
	def_bool n

	menu "Bus options"

	config PCI
	bool "PCI support"
	default y
	help
	Find out whether you have a PCI motherboard. PCI is the name of a
	bus system, i.e. the way the CPU talks to the other stuff inside
	your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
	VESA. If you have PCI, say Y, otherwise N.

	source "drivers/pci/Kconfig"

	endmenu

	menu "Platform options"

	choice
	prompt "Xtensa System Type"
	default XTENSA_PLATFORM_ISS

	config XTENSA_PLATFORM_ISS
	bool "ISS"
	depends on TTY
	select XTENSA_CALIBRATE_CCOUNT
	select SERIAL_CONSOLE
	select XTENSA_ISS_NETWORK
	help
	ISS is an acronym for Tensilica's Instruction Set Simulator.

	config XTENSA_PLATFORM_XT2000
	bool "XT2000"
	help
	XT2000 is the name of Tensilica's feature-rich emulation platform.
	This hardware is capable of running a full Linux distribution.

	config XTENSA_PLATFORM_S6105
	bool "S6105"
	select SERIAL_CONSOLE
	select NO_IOPORT

	config XTENSA_PLATFORM_XTFPGA
	bool "XTFPGA"
	select SERIAL_CONSOLE
	select ETHOC
	select XTENSA_CALIBRATE_CCOUNT
	help
	XTFPGA is the name of Tensilica board family (LX60, LX110, LX200, ML605).
	This hardware is capable of running a full Linux distribution.

	endchoice


	config XTENSA_CPU_CLOCK
	int "CPU clock rate [MHz]"
	depends on !XTENSA_CALIBRATE_CCOUNT
	default 16

	config GENERIC_CALIBRATE_DELAY
	bool "Auto calibration of the BogoMIPS value"
	help
	The BogoMIPS value can easily be derived from the CPU frequency.

	config CMDLINE_BOOL
	bool "Default bootloader kernel arguments"

	config CMDLINE
	string "Initial kernel command string"
	depends on CMDLINE_BOOL
	default "console=ttyS0,38400 root=/dev/ram"
	help
	On some architectures (EBSA110 and CATS), there is currently no way
	for the boot loader to pass arguments to the kernel. For these
	architectures, you should supply some command-line options at build
	time by entering them here. As a minimum, you should specify the
	memory size and the root device (e.g., mem=64M root=/dev/nfs).

	config USE_OF
	bool "Flattened Device Tree support"
	select OF
	select OF_EARLY_FLATTREE
	help
	Include support for flattened device tree machine descriptions.

	config BUILTIN_DTB
	string "DTB to build into the kernel image"
	depends on OF

	config BLK_DEV_SIMDISK
	tristate "Host file-based simulated block device support"
	default n
	depends on XTENSA_PLATFORM_ISS
	help
	Create block devices that map to files in the host file system.
	Device binding to host file may be changed at runtime via proc
	interface provided the device is not in use.

	config BLK_DEV_SIMDISK_COUNT
	int "Number of host file-based simulated block devices"
	range 1 10
	depends on BLK_DEV_SIMDISK
	default 2
	help
	This is the default minimal number of created block devices.
	Kernel/module parameter 'simdisk_count' may be used to change this
	value at runtime. More file names (but no more than 10) may be
	specified as parameters, simdisk_count grows accordingly.

	config SIMDISK0_FILENAME
	string "Host filename for the first simulated device"
	depends on BLK_DEV_SIMDISK = y
	default ""
	help
	Attach a first simdisk to a host file. Conventionally, this file
	contains a root file system.

	config SIMDISK1_FILENAME
	string "Host filename for the second simulated device"
	depends on BLK_DEV_SIMDISK = y && BLK_DEV_SIMDISK_COUNT != 1
	default ""
	help
	Another simulated disk in a host file for a buildroot-independent
	storage.

	source "mm/Kconfig"

	source "drivers/pcmcia/Kconfig"

	source "drivers/pci/hotplug/Kconfig"

	endmenu

	menu "Executable file formats"

	# only elf supported
	config KCORE_ELF
	def_bool y
	depends on PROC_FS
	help
	If you enabled support for /proc file system then the file
	/proc/kcore will contain the kernel core image in ELF format. This
	can be used in gdb:

	$ cd /usr/src/linux ; gdb vmlinux /proc/kcore

	This is especially useful if you have compiled the kernel with the
	"-g" option to preserve debugging information. It is mainly used
	for examining kernel data structures on the live kernel.

	source "fs/Kconfig.binfmt"

	endmenu

	source "net/Kconfig"

	source "drivers/Kconfig"

	source "fs/Kconfig"

	source "arch/xtensa/Kconfig.debug"

	source "security/Kconfig"

	source "crypto/Kconfig"

	source "lib/Kconfig"