ARM: mx5: dynamically allocate mxc-ehci devices

Additionally make the usb related defines consistent with the other imx
SoCs.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c
index 4435e03..e99dead 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-mx5/mx51_efika.c
@@ -41,7 +41,6 @@
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "efika.h"
 #include "cpu_op-mx51.h"
 
@@ -133,7 +132,7 @@
 	u32 v;
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
@@ -150,7 +149,7 @@
 	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
 }
 
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
 	.init   = initialize_otg_port,
 	.portsc = MXC_EHCI_UTMI_16BIT,
 };
@@ -170,7 +169,7 @@
 	gpio_set_value(EFIKAMX_USBH1_STP, 1);
 	msleep(1);
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
 
 	/* The clock for the USBH1 ULPI port will come externally */
@@ -189,7 +188,7 @@
 	return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data usbh1_config = {
+static struct mxc_usbh_platform_data usbh1_config __initdata = {
 	.init   = initialize_usbh1_port,
 	.portsc = MXC_EHCI_MODE_ULPI,
 };
@@ -217,9 +216,9 @@
 	usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
 			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
 
-	mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	imx51_add_mxc_ehci_otg(&dr_utmi_config);
 	if (usbh1_config.otg)
-		mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+		imx51_add_mxc_ehci_hs(1, &usbh1_config);
 }
 
 static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
@@ -631,4 +630,3 @@
 	get_cpu_op = mx51_get_cpu_op;
 #endif
 }
-