[media] adv7842: Use defines to select EDID port
Signed-off-by: Mats Randgaard <matrandg@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c
index ab44897..a26c70c 100644
--- a/drivers/media/i2c/adv7842.c
+++ b/drivers/media/i2c/adv7842.c
@@ -22,8 +22,8 @@
* References (c = chapter, p = page):
* REF_01 - Analog devices, ADV7842, Register Settings Recommendations,
* Revision 2.5, June 2010
- * REF_02 - Analog devices, Register map documentation, Documentation of
- * the register maps, Software manual, Rev. F, June 2010
+ * REF_02 - Analog devices, Software User Guide, UG-206,
+ * ADV7842 I2C Register Maps, Rev. 0, November 2010
*/
@@ -587,10 +587,10 @@
v4l2_dbg(2, debug, sd, "%s: enable hotplug on ports: 0x%x\n",
__func__, present);
- if (present & 0x1)
- mask |= 0x20; /* port A */
- if (present & 0x2)
- mask |= 0x10; /* port B */
+ if (present & (0x04 << ADV7842_EDID_PORT_A))
+ mask |= 0x20;
+ if (present & (0x04 << ADV7842_EDID_PORT_B))
+ mask |= 0x10;
io_write_and_or(sd, 0x20, 0xcf, mask);
}
@@ -679,14 +679,12 @@
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct adv7842_state *state = to_state(sd);
const u8 *val = state->hdmi_edid.edid;
- u8 cur_mask = rep_read(sd, 0x77) & 0x0c;
- u8 mask = port == 0 ? 0x4 : 0x8;
int spa_loc = edid_spa_location(val);
int err = 0;
int i;
- v4l2_dbg(2, debug, sd, "%s: write EDID on port %d (spa at 0x%x)\n",
- __func__, port, spa_loc);
+ v4l2_dbg(2, debug, sd, "%s: write EDID on port %c (spa at 0x%x)\n",
+ __func__, (port == ADV7842_EDID_PORT_A) ? 'A' : 'B', spa_loc);
/* HPA disable on port A and B */
io_write_and_or(sd, 0x20, 0xcf, 0x00);
@@ -703,44 +701,32 @@
if (err)
return err;
- if (spa_loc > 0) {
- if (port == 0) {
- /* port A SPA */
- rep_write(sd, 0x72, val[spa_loc]);
- rep_write(sd, 0x73, val[spa_loc + 1]);
- } else {
- /* port B SPA */
- rep_write(sd, 0x74, val[spa_loc]);
- rep_write(sd, 0x75, val[spa_loc + 1]);
- }
- rep_write(sd, 0x76, spa_loc);
+ if (spa_loc < 0)
+ spa_loc = 0xc0; /* Default value [REF_02, p. 199] */
+
+ if (port == ADV7842_EDID_PORT_A) {
+ rep_write(sd, 0x72, val[spa_loc]);
+ rep_write(sd, 0x73, val[spa_loc + 1]);
} else {
- /* Edid values for SPA location */
- if (port == 0) {
- /* port A */
- rep_write(sd, 0x72, val[0xc0]);
- rep_write(sd, 0x73, val[0xc1]);
- } else {
- /* port B */
- rep_write(sd, 0x74, val[0xc0]);
- rep_write(sd, 0x75, val[0xc1]);
- }
- rep_write(sd, 0x76, 0xc0);
+ rep_write(sd, 0x74, val[spa_loc]);
+ rep_write(sd, 0x75, val[spa_loc + 1]);
}
- rep_write_and_or(sd, 0x77, 0xbf, 0x00);
+ rep_write(sd, 0x76, spa_loc & 0xff);
+ rep_write_and_or(sd, 0x77, 0xbf, (spa_loc >> 2) & 0x40);
/* Calculates the checksums and enables I2C access to internal
* EDID ram from HDMI DDC ports
*/
- rep_write_and_or(sd, 0x77, 0xf3, mask | cur_mask);
+ rep_write_and_or(sd, 0x77, 0xf3, state->hdmi_edid.present);
for (i = 0; i < 1000; i++) {
- if (rep_read(sd, 0x7d) & mask)
+ if (rep_read(sd, 0x7d) & state->hdmi_edid.present)
break;
mdelay(1);
}
if (i == 1000) {
- v4l_err(client, "error enabling edid on port %d\n", port);
+ v4l_err(client, "error enabling edid on port %c\n",
+ (port == ADV7842_EDID_PORT_A) ? 'A' : 'B');
return -EIO;
}
@@ -1888,7 +1874,7 @@
struct adv7842_state *state = to_state(sd);
int err = 0;
- if (e->pad > 2)
+ if (e->pad > ADV7842_EDID_PORT_VGA)
return -EINVAL;
if (e->start_block != 0)
return -EINVAL;
@@ -1901,20 +1887,25 @@
state->aspect_ratio = v4l2_calc_aspect_ratio(e->edid[0x15],
e->edid[0x16]);
- if (e->pad == 2) {
+ switch (e->pad) {
+ case ADV7842_EDID_PORT_VGA:
memset(&state->vga_edid.edid, 0, 256);
state->vga_edid.present = e->blocks ? 0x1 : 0x0;
memcpy(&state->vga_edid.edid, e->edid, 128 * e->blocks);
err = edid_write_vga_segment(sd);
- } else {
- u32 mask = 0x1<<e->pad;
+ break;
+ case ADV7842_EDID_PORT_A:
+ case ADV7842_EDID_PORT_B:
memset(&state->hdmi_edid.edid, 0, 256);
if (e->blocks)
- state->hdmi_edid.present |= mask;
+ state->hdmi_edid.present |= 0x04 << e->pad;
else
- state->hdmi_edid.present &= ~mask;
- memcpy(&state->hdmi_edid.edid, e->edid, 128*e->blocks);
+ state->hdmi_edid.present &= ~(0x04 << e->pad);
+ memcpy(&state->hdmi_edid.edid, e->edid, 128 * e->blocks);
err = edid_write_hdmi_segment(sd, e->pad);
+ break;
+ default:
+ return -EINVAL;
}
if (err < 0)
v4l2_err(sd, "error %d writing edid on port %d\n", err, e->pad);