Merge tag 'v4.0' into for_next
Linux 4.0
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index e31d494..87be10e 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -428,6 +428,36 @@
If unsure, leave the default value here.
+config XTFPGA_LCD
+ bool "Enable XTFPGA LCD driver"
+ depends on XTENSA_PLATFORM_XTFPGA
+ default n
+ help
+ There's a 2x16 LCD on most of XTFPGA boards, kernel may output
+ progress messages there during bootup/shutdown. It may be useful
+ during board bringup.
+
+ If unsure, say N.
+
+config XTFPGA_LCD_BASE_ADDR
+ hex "XTFPGA LCD base address"
+ depends on XTFPGA_LCD
+ default "0x0d0c0000"
+ help
+ Base address of the LCD controller inside KIO region.
+ Different boards from XTFPGA family have LCD controller at different
+ addresses. Please consult prototyping user guide for your board for
+ the correct address. Wrong address here may lead to hardware lockup.
+
+config XTFPGA_LCD_8BIT_ACCESS
+ bool "Use 8-bit access to XTFPGA LCD"
+ depends on XTFPGA_LCD
+ default n
+ help
+ LCD may be connected with 4- or 8-bit interface, 8-bit access may
+ only be used with 8-bit interface. Please consult prototyping user
+ guide for your board for the correct interface width.
+
endmenu
menu "Executable file formats"
diff --git a/arch/xtensa/boot/dts/xtfpga.dtsi b/arch/xtensa/boot/dts/xtfpga.dtsi
index dec9178..cd0b9e34 100644
--- a/arch/xtensa/boot/dts/xtfpga.dtsi
+++ b/arch/xtensa/boot/dts/xtfpga.dtsi
@@ -40,6 +40,12 @@
#clock-cells = <0>;
compatible = "fixed-clock";
};
+
+ clk54: clk54 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <54000000>;
+ };
};
soc {
@@ -65,5 +71,63 @@
local-mac-address = [00 50 c2 13 6f 00];
clocks = <&osc>;
};
+
+ i2s0: xtfpga-i2s@0d080000 {
+ #sound-dai-cells = <0>;
+ compatible = "cdns,xtfpga-i2s";
+ reg = <0x0d080000 0x40>;
+ interrupts = <2 1>; /* external irq 2 */
+ clocks = <&cdce706 4>;
+ };
+
+ i2c0: i2c-master@0d090000 {
+ compatible = "opencores,i2c-ocores";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0d090000 0x20>;
+ reg-shift = <2>;
+ reg-io-width = <1>;
+ interrupts = <4 1>;
+ clocks = <&osc>;
+
+ cdce706: clock-synth@69 {
+ compatible = "ti,cdce706";
+ #clock-cells = <1>;
+ reg = <0x69>;
+ clocks = <&clk54>;
+ clock-names = "clk_in0";
+ };
+ };
+
+ spi0: spi-master@0d0a0000 {
+ compatible = "cdns,xtfpga-spi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0d0a0000 0xc>;
+
+ tlv320aic23: sound-codec@0 {
+ #sound-dai-cells = <0>;
+ compatible = "tlv320aic23";
+ reg = <0>;
+ spi-max-frequency = <12500000>;
+ };
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,mclk-fs = <256>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&tlv320aic23>;
+ simple-audio-card,bitclock-master = <0>;
+ simple-audio-card,frame-master = <0>;
+ clocks = <&cdce706 4>;
+ };
};
};
diff --git a/arch/xtensa/configs/audio_kc705_defconfig b/arch/xtensa/configs/audio_kc705_defconfig
new file mode 100644
index 0000000..c4904db
--- /dev/null
+++ b/arch/xtensa/configs/audio_kc705_defconfig
@@ -0,0 +1,142 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_MEMCG=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_XTENSA_VARIANT_CUSTOM=y
+CONFIG_XTENSA_VARIANT_CUSTOM_NAME="test_kc705_hifi"
+CONFIG_XTENSA_UNALIGNED_USER=y
+CONFIG_PREEMPT=y
+CONFIG_HIGHMEM=y
+# CONFIG_PCI is not set
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
+CONFIG_USE_OF=y
+CONFIG_BUILTIN_DTB="kc705"
+# CONFIG_COMPACTION is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_MARVELL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_OCORES=y
+CONFIG_SPI=y
+CONFIG_SPI_XTENSA_XTFPGA=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_XTFPGA_I2S=y
+CONFIG_SND_SOC_TLV320AIC23_SPI=y
+CONFIG_SND_SIMPLE_CARD=y
+# CONFIG_USB_SUPPORT is not set
+CONFIG_COMMON_CLK_CDCE706=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNRPC_DEBUG=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_STACKTRACE=y
+CONFIG_RCU_TRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_S32C1I_SELFTEST is not set
+CONFIG_CRYPTO_ANSI_CPRNG=y
diff --git a/arch/xtensa/include/uapi/asm/unistd.h b/arch/xtensa/include/uapi/asm/unistd.h
index db5bb72..b95c305 100644
--- a/arch/xtensa/include/uapi/asm/unistd.h
+++ b/arch/xtensa/include/uapi/asm/unistd.h
@@ -715,7 +715,7 @@
__SYSCALL(324, sys_name_to_handle_at, 5)
#define __NR_open_by_handle_at 325
__SYSCALL(325, sys_open_by_handle_at, 3)
-#define __NR_sync_file_range 326
+#define __NR_sync_file_range2 326
__SYSCALL(326, sys_sync_file_range2, 6)
#define __NR_perf_event_open 327
__SYSCALL(327, sys_perf_event_open, 5)
@@ -749,8 +749,12 @@
__SYSCALL(338, sys_getrandom, 3)
#define __NR_memfd_create 339
__SYSCALL(339, sys_memfd_create, 2)
+#define __NR_bpf 340
+__SYSCALL(340, sys_bpf, 3)
+#define __NR_execveat 341
+__SYSCALL(341, sys_execveat, 5)
-#define __NR_syscall_count 340
+#define __NR_syscall_count 342
/*
* sysxtensa syscall handler
diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile
index 18d962a..d3a0f0f 100644
--- a/arch/xtensa/kernel/Makefile
+++ b/arch/xtensa/kernel/Makefile
@@ -29,6 +29,7 @@
sed-y = -e 's/\*(\(\.[a-z]*it\|\.ref\|\)\.text)/*(\1.literal \1.text)/g' \
-e 's/\.text\.unlikely/.literal.unlikely .text.unlikely/g' \
+ -e 's/\*(\(\.text .*\))/*(.literal \1)/g' \
-e 's/\*(\(\.text\.[a-z]*\))/*(\1.literal \1)/g'
quiet_cmd__cpp_lds_S = LDS $@
diff --git a/arch/xtensa/platforms/xtfpga/Makefile b/arch/xtensa/platforms/xtfpga/Makefile
index b9ae206..7839d38 100644
--- a/arch/xtensa/platforms/xtfpga/Makefile
+++ b/arch/xtensa/platforms/xtfpga/Makefile
@@ -6,4 +6,5 @@
#
# Note 2! The CFLAGS definitions are in the main makefile...
-obj-y = setup.o lcd.o
+obj-y += setup.o
+obj-$(CONFIG_XTFPGA_LCD) += lcd.o
diff --git a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
index 6edd20b..4e0af26 100644
--- a/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
+++ b/arch/xtensa/platforms/xtfpga/include/platform/hardware.h
@@ -40,9 +40,6 @@
/* UART */
#define DUART16552_PADDR (XCHAL_KIO_PADDR + 0x0D050020)
-/* LCD instruction and data addresses. */
-#define LCD_INSTR_ADDR ((char *)IOADDR(0x0D040000))
-#define LCD_DATA_ADDR ((char *)IOADDR(0x0D040004))
/* Misc. */
#define XTFPGA_FPGAREGS_VADDR IOADDR(0x0D020000)
diff --git a/arch/xtensa/platforms/xtfpga/include/platform/lcd.h b/arch/xtensa/platforms/xtfpga/include/platform/lcd.h
index 0e43564..4c8541e 100644
--- a/arch/xtensa/platforms/xtfpga/include/platform/lcd.h
+++ b/arch/xtensa/platforms/xtfpga/include/platform/lcd.h
@@ -11,10 +11,25 @@
#ifndef __XTENSA_XTAVNET_LCD_H
#define __XTENSA_XTAVNET_LCD_H
+#ifdef CONFIG_XTFPGA_LCD
/* Display string STR at position POS on the LCD. */
void lcd_disp_at_pos(char *str, unsigned char pos);
/* Shift the contents of the LCD display left or right. */
void lcd_shiftleft(void);
void lcd_shiftright(void);
+#else
+static inline void lcd_disp_at_pos(char *str, unsigned char pos)
+{
+}
+
+static inline void lcd_shiftleft(void)
+{
+}
+
+static inline void lcd_shiftright(void)
+{
+}
+#endif
+
#endif
diff --git a/arch/xtensa/platforms/xtfpga/lcd.c b/arch/xtensa/platforms/xtfpga/lcd.c
index 2872301..4dc0c1b 100644
--- a/arch/xtensa/platforms/xtfpga/lcd.c
+++ b/arch/xtensa/platforms/xtfpga/lcd.c
@@ -1,50 +1,63 @@
/*
- * Driver for the LCD display on the Tensilica LX60 Board.
+ * Driver for the LCD display on the Tensilica XTFPGA board family.
+ * http://www.mytechcorp.com/cfdata/productFile/File1/MOC-16216B-B-A0A04.pdf
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2001, 2006 Tensilica Inc.
+ * Copyright (C) 2015 Cadence Design Systems Inc.
*/
-/*
- *
- * FIXME: this code is from the examples from the LX60 user guide.
- *
- * The lcd_pause function does busy waiting, which is probably not
- * great. Maybe the code could be changed to use kernel timers, or
- * change the hardware to not need to wait.
- */
-
+#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <platform/hardware.h>
#include <platform/lcd.h>
-#include <linux/delay.h>
-#define LCD_PAUSE_ITERATIONS 4000
+/* LCD instruction and data addresses. */
+#define LCD_INSTR_ADDR ((char *)IOADDR(CONFIG_XTFPGA_LCD_BASE_ADDR))
+#define LCD_DATA_ADDR (LCD_INSTR_ADDR + 4)
+
#define LCD_CLEAR 0x1
#define LCD_DISPLAY_ON 0xc
/* 8bit and 2 lines display */
#define LCD_DISPLAY_MODE8BIT 0x38
+#define LCD_DISPLAY_MODE4BIT 0x28
#define LCD_DISPLAY_POS 0x80
#define LCD_SHIFT_LEFT 0x18
#define LCD_SHIFT_RIGHT 0x1c
+static void lcd_put_byte(u8 *addr, u8 data)
+{
+#ifdef CONFIG_XTFPGA_LCD_8BIT_ACCESS
+ ACCESS_ONCE(*addr) = data;
+#else
+ ACCESS_ONCE(*addr) = data & 0xf0;
+ ACCESS_ONCE(*addr) = (data << 4) & 0xf0;
+#endif
+}
+
static int __init lcd_init(void)
{
- *LCD_INSTR_ADDR = LCD_DISPLAY_MODE8BIT;
+ ACCESS_ONCE(*LCD_INSTR_ADDR) = LCD_DISPLAY_MODE8BIT;
mdelay(5);
- *LCD_INSTR_ADDR = LCD_DISPLAY_MODE8BIT;
+ ACCESS_ONCE(*LCD_INSTR_ADDR) = LCD_DISPLAY_MODE8BIT;
udelay(200);
- *LCD_INSTR_ADDR = LCD_DISPLAY_MODE8BIT;
+ ACCESS_ONCE(*LCD_INSTR_ADDR) = LCD_DISPLAY_MODE8BIT;
udelay(50);
- *LCD_INSTR_ADDR = LCD_DISPLAY_ON;
+#ifndef CONFIG_XTFPGA_LCD_8BIT_ACCESS
+ ACCESS_ONCE(*LCD_INSTR_ADDR) = LCD_DISPLAY_MODE4BIT;
udelay(50);
- *LCD_INSTR_ADDR = LCD_CLEAR;
+ lcd_put_byte(LCD_INSTR_ADDR, LCD_DISPLAY_MODE4BIT);
+ udelay(50);
+#endif
+ lcd_put_byte(LCD_INSTR_ADDR, LCD_DISPLAY_ON);
+ udelay(50);
+ lcd_put_byte(LCD_INSTR_ADDR, LCD_CLEAR);
mdelay(10);
lcd_disp_at_pos("XTENSA LINUX", 0);
return 0;
@@ -52,10 +65,10 @@
void lcd_disp_at_pos(char *str, unsigned char pos)
{
- *LCD_INSTR_ADDR = LCD_DISPLAY_POS | pos;
+ lcd_put_byte(LCD_INSTR_ADDR, LCD_DISPLAY_POS | pos);
udelay(100);
while (*str != 0) {
- *LCD_DATA_ADDR = *str;
+ lcd_put_byte(LCD_DATA_ADDR, *str);
udelay(200);
str++;
}
@@ -63,13 +76,13 @@
void lcd_shiftleft(void)
{
- *LCD_INSTR_ADDR = LCD_SHIFT_LEFT;
+ lcd_put_byte(LCD_INSTR_ADDR, LCD_SHIFT_LEFT);
udelay(50);
}
void lcd_shiftright(void)
{
- *LCD_INSTR_ADDR = LCD_SHIFT_RIGHT;
+ lcd_put_byte(LCD_INSTR_ADDR, LCD_SHIFT_RIGHT);
udelay(50);
}