spi: master driver to enable RTC on ICPDAS LP-8841
ICP DAS LP-8841 contains a DS-1302 RTC. This driver provides an SPI
master which makes the RTC usable. The driver is not supposed to work
with anything else.
The driver uses the standard MicroWire half-duplex transfer timing.
Master output is set on low clock and sensed by the RTC on the rising
edge. Master input is set by the RTC on the trailing edge and is sensed
by the master on low clock.
Signed-off-by: Sergei Ianovich <ynvich@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/drivers/spi/spi-lp8841-rtc.c b/drivers/spi/spi-lp8841-rtc.c
new file mode 100644
index 0000000..44bb69c
--- /dev/null
+++ b/drivers/spi/spi-lp8841-rtc.c
@@ -0,0 +1,255 @@
+/*
+ * SPI master driver for ICP DAS LP-8841 RTC
+ *
+ * Copyright (C) 2016 Sergei Ianovich
+ *
+ * based on
+ *
+ * Dallas DS1302 RTC Support
+ * Copyright (C) 2002 David McCullough
+ * Copyright (C) 2003 - 2007 Paul Mundt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/spi/spi.h>
+
+#define DRIVER_NAME "spi_lp8841_rtc"
+
+#define SPI_LP8841_RTC_CE 0x01
+#define SPI_LP8841_RTC_CLK 0x02
+#define SPI_LP8841_RTC_nWE 0x04
+#define SPI_LP8841_RTC_MOSI 0x08
+#define SPI_LP8841_RTC_MISO 0x01
+
+/*
+ * REVISIT If there is support for SPI_3WIRE and SPI_LSB_FIRST in SPI
+ * GPIO driver, this SPI driver can be replaced by a simple GPIO driver
+ * providing 3 GPIO pins.
+ */
+
+struct spi_lp8841_rtc {
+ void *iomem;
+ unsigned long state;
+};
+
+static inline void
+setsck(struct spi_lp8841_rtc *data, int is_on)
+{
+ if (is_on)
+ data->state |= SPI_LP8841_RTC_CLK;
+ else
+ data->state &= ~SPI_LP8841_RTC_CLK;
+ writeb(data->state, data->iomem);
+}
+
+static inline void
+setmosi(struct spi_lp8841_rtc *data, int is_on)
+{
+ if (is_on)
+ data->state |= SPI_LP8841_RTC_MOSI;
+ else
+ data->state &= ~SPI_LP8841_RTC_MOSI;
+ writeb(data->state, data->iomem);
+}
+
+static inline int
+getmiso(struct spi_lp8841_rtc *data)
+{
+ return ioread8(data->iomem) & SPI_LP8841_RTC_MISO;
+}
+
+static inline u32
+bitbang_txrx_be_cpha0_lsb(struct spi_lp8841_rtc *data,
+ unsigned usecs, unsigned cpol, unsigned flags,
+ u32 word, u8 bits)
+{
+ /* if (cpol == 0) this is SPI_MODE_0; else this is SPI_MODE_2 */
+
+ u32 shift = 32 - bits;
+ /* clock starts at inactive polarity */
+ for (; likely(bits); bits--) {
+
+ /* setup LSB (to slave) on leading edge */
+ if ((flags & SPI_MASTER_NO_TX) == 0)
+ setmosi(data, (word & 1));
+
+ usleep_range(usecs, usecs + 1); /* T(setup) */
+
+ /* sample LSB (from slave) on trailing edge */
+ word >>= 1;
+ if ((flags & SPI_MASTER_NO_RX) == 0)
+ word |= (getmiso(data) << 31);
+
+ setsck(data, !cpol);
+ usleep_range(usecs, usecs + 1);
+
+ setsck(data, cpol);
+ }
+
+ word >>= shift;
+ return word;
+}
+
+static int
+spi_lp8841_rtc_transfer_one(struct spi_master *master,
+ struct spi_device *spi,
+ struct spi_transfer *t)
+{
+ struct spi_lp8841_rtc *data = spi_master_get_devdata(master);
+ unsigned count = t->len;
+ const u8 *tx = t->tx_buf;
+ u8 *rx = t->rx_buf;
+ u8 word = 0;
+ int ret = 0;
+
+ if (tx) {
+ data->state &= ~SPI_LP8841_RTC_nWE;
+ writeb(data->state, data->iomem);
+ while (likely(count > 0)) {
+ word = *tx++;
+ bitbang_txrx_be_cpha0_lsb(data, 1, 0,
+ SPI_MASTER_NO_RX, word, 8);
+ count--;
+ }
+ } else if (rx) {
+ data->state |= SPI_LP8841_RTC_nWE;
+ writeb(data->state, data->iomem);
+ while (likely(count > 0)) {
+ word = bitbang_txrx_be_cpha0_lsb(data, 1, 0,
+ SPI_MASTER_NO_TX, word, 8);
+ *rx++ = word;
+ count--;
+ }
+ } else {
+ ret = -EINVAL;
+ }
+
+ spi_finalize_current_transfer(master);
+
+ return ret;
+}
+
+static void
+spi_lp8841_rtc_set_cs(struct spi_device *spi, bool enable)
+{
+ struct spi_lp8841_rtc *data = spi_master_get_devdata(spi->master);
+
+ data->state = 0;
+ writeb(data->state, data->iomem);
+ if (enable) {
+ usleep_range(4, 5);
+ data->state |= SPI_LP8841_RTC_CE;
+ writeb(data->state, data->iomem);
+ usleep_range(4, 5);
+ }
+}
+
+static int
+spi_lp8841_rtc_setup(struct spi_device *spi)
+{
+ if ((spi->mode & SPI_CS_HIGH) == 0) {
+ dev_err(&spi->dev, "unsupported active low chip select\n");
+ return -EINVAL;
+ }
+
+ if ((spi->mode & SPI_LSB_FIRST) == 0) {
+ dev_err(&spi->dev, "unsupported MSB first mode\n");
+ return -EINVAL;
+ }
+
+ if ((spi->mode & SPI_3WIRE) == 0) {
+ dev_err(&spi->dev, "unsupported wiring. 3 wires required\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id spi_lp8841_rtc_dt_ids[] = {
+ { .compatible = "icpdas,lp8841-spi-rtc" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, spi_lp8841_rtc_dt_ids);
+#endif
+
+static int
+spi_lp8841_rtc_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct spi_master *master;
+ struct spi_lp8841_rtc *data;
+ void *iomem;
+
+ master = spi_alloc_master(&pdev->dev, sizeof(*data));
+ if (!master)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, master);
+
+ master->flags = SPI_MASTER_HALF_DUPLEX;
+ master->mode_bits = SPI_CS_HIGH | SPI_3WIRE | SPI_LSB_FIRST;
+
+ master->bus_num = pdev->id;
+ master->num_chipselect = 1;
+ master->setup = spi_lp8841_rtc_setup;
+ master->set_cs = spi_lp8841_rtc_set_cs;
+ master->transfer_one = spi_lp8841_rtc_transfer_one;
+ master->bits_per_word_mask = SPI_BPW_MASK(8);
+#ifdef CONFIG_OF
+ master->dev.of_node = pdev->dev.of_node;
+#endif
+
+ data = spi_master_get_devdata(master);
+
+ iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->iomem = devm_ioremap_resource(&pdev->dev, iomem);
+ if (IS_ERR(data->iomem)) {
+ dev_err(&pdev->dev, "failed to get IO address\n");
+ goto err_put_master;
+ }
+
+ /* register with the SPI framework */
+ ret = devm_spi_register_master(&pdev->dev, master);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot register spi master\n");
+ goto err_put_master;
+ }
+
+ return ret;
+
+
+err_put_master:
+ spi_master_put(master);
+
+ return ret;
+}
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+
+static struct platform_driver spi_lp8841_rtc_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(spi_lp8841_rtc_dt_ids),
+ },
+ .probe = spi_lp8841_rtc_probe,
+};
+module_platform_driver(spi_lp8841_rtc_driver);
+
+MODULE_DESCRIPTION("SPI master driver for ICP DAS LP-8841 RTC");
+MODULE_AUTHOR("Sergei Ianovich");
+MODULE_LICENSE("GPL");