drivers/edac/i3000_edac.c - kernel/msm-4.19 - Gitiles

 /*
  * Intel 3000/3010 Memory Controller kernel module
  * Copyright (C) 2007 Akamai Technologies, Inc.
  * Shamelessly copied from:
  * 	Intel D82875P Memory Controller kernel module
  * 	(C) 2003 Linux Networx (http://lnxi.com)
  *
  * This file may be distributed under the terms of the
  * GNU General Public License.
  */

 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/pci_ids.h>
 #include <linux/slab.h>
 #include <linux/edac.h>
 #include "edac_core.h"

 #define I3000_REVISION		"1.1"

 #define EDAC_MOD_STR		"i3000_edac"

 #define I3000_RANKS		8
 #define I3000_RANKS_PER_CHANNEL	4
 #define I3000_CHANNELS		2

 /* Intel 3000 register addresses - device 0 function 0 - DRAM Controller */

 #define I3000_MCHBAR		0x44	/* MCH Memory Mapped Register BAR */
 #define I3000_MCHBAR_MASK	0xffffc000
 #define I3000_MMR_WINDOW_SIZE	16384

 #define I3000_EDEAP	0x70	/* Extended DRAM Error Address Pointer (8b)
 				 *
 				 * 7:1   reserved
 				 * 0     bit 32 of address
 				 */
 #define I3000_DEAP	0x58	/* DRAM Error Address Pointer (32b)
 				 *
 				 * 31:7  address
 				 * 6:1   reserved
 				 * 0     Error channel 0/1
 				 */
 #define I3000_DEAP_GRAIN 		(1 << 7)

 static inline unsigned long deap_pfn(u8 edeap, u32 deap)
 {
 	deap >>= PAGE_SHIFT;
 	deap |= (edeap & 1) << (32 - PAGE_SHIFT);
 	return deap;
 }

 static inline unsigned long deap_offset(u32 deap)
 {
 	return deap & ~(I3000_DEAP_GRAIN - 1) & ~PAGE_MASK;
 }

 static inline int deap_channel(u32 deap)
 {
 	return deap & 1;
 }

 #define I3000_DERRSYN	0x5c	/* DRAM Error Syndrome (8b)
 				 *
 				 *  7:0  DRAM ECC Syndrome
 				 */

 #define I3000_ERRSTS	0xc8	/* Error Status Register (16b)
 				 *
 				 * 15:12 reserved
 				 * 11    MCH Thermal Sensor Event
 				 *         for SMI/SCI/SERR
 				 * 10    reserved
 				 *  9    LOCK to non-DRAM Memory Flag (LCKF)
 				 *  8    Received Refresh Timeout Flag (RRTOF)
 				 *  7:2  reserved
 				 *  1    Multi-bit DRAM ECC Error Flag (DMERR)
 				 *  0    Single-bit DRAM ECC Error Flag (DSERR)
 				 */
 #define I3000_ERRSTS_BITS	0x0b03	/* bits which indicate errors */
 #define I3000_ERRSTS_UE		0x0002
 #define I3000_ERRSTS_CE		0x0001

 #define I3000_ERRCMD	0xca	/* Error Command (16b)
 				 *
 				 * 15:12 reserved
 				 * 11    SERR on MCH Thermal Sensor Event
 				 *         (TSESERR)
 				 * 10    reserved
 				 *  9    SERR on LOCK to non-DRAM Memory
 				 *         (LCKERR)
 				 *  8    SERR on DRAM Refresh Timeout
 				 *         (DRTOERR)
 				 *  7:2  reserved
 				 *  1    SERR Multi-Bit DRAM ECC Error
 				 *         (DMERR)
 				 *  0    SERR on Single-Bit ECC Error
 				 *         (DSERR)
 				 */

 /* Intel  MMIO register space - device 0 function 0 - MMR space */

 #define I3000_DRB_SHIFT 25	/* 32MiB grain */

 #define I3000_C0DRB	0x100	/* Channel 0 DRAM Rank Boundary (8b x 4)
 				 *
 				 * 7:0   Channel 0 DRAM Rank Boundary Address
 				 */
 #define I3000_C1DRB	0x180	/* Channel 1 DRAM Rank Boundary (8b x 4)
 				 *
 				 * 7:0   Channel 1 DRAM Rank Boundary Address
 				 */

 #define I3000_C0DRA	0x108	/* Channel 0 DRAM Rank Attribute (8b x 2)
 				 *
 				 * 7     reserved
 				 * 6:4   DRAM odd Rank Attribute
 				 * 3     reserved
 				 * 2:0   DRAM even Rank Attribute
 				 *
 				 * Each attribute defines the page
 				 * size of the corresponding rank:
 				 *     000: unpopulated
 				 *     001: reserved
 				 *     010: 4 KB
 				 *     011: 8 KB
 				 *     100: 16 KB
 				 *     Others: reserved
 				 */
 #define I3000_C1DRA	0x188	/* Channel 1 DRAM Rank Attribute (8b x 2) */

 static inline unsigned char odd_rank_attrib(unsigned char dra)
 {
 	return (dra & 0x70) >> 4;
 }

 static inline unsigned char even_rank_attrib(unsigned char dra)
 {
 	return dra & 0x07;
 }

 #define I3000_C0DRC0	0x120	/* DRAM Controller Mode 0 (32b)
 				 *
 				 * 31:30 reserved
 				 * 29    Initialization Complete (IC)
 				 * 28:11 reserved
 				 * 10:8  Refresh Mode Select (RMS)
 				 * 7     reserved
 				 * 6:4   Mode Select (SMS)
 				 * 3:2   reserved
 				 * 1:0   DRAM Type (DT)
 				 */

 #define I3000_C0DRC1	0x124	/* DRAM Controller Mode 1 (32b)
 				 *
 				 * 31    Enhanced Addressing Enable (ENHADE)
 				 * 30:0  reserved
 				 */

 enum i3000p_chips {
 	I3000 = 0,
 };

 struct i3000_dev_info {
 	const char *ctl_name;
 };

 struct i3000_error_info {
 	u16 errsts;
 	u8 derrsyn;
 	u8 edeap;
 	u32 deap;
 	u16 errsts2;
 };

 static const struct i3000_dev_info i3000_devs[] = {
 	[I3000] = {
 		.ctl_name = "i3000"},
 };

 static struct pci_dev *mci_pdev;
 static int i3000_registered = 1;
 static struct edac_pci_ctl_info *i3000_pci;

 static void i3000_get_error_info(struct mem_ctl_info *mci,
 				 struct i3000_error_info *info)
 {
 	struct pci_dev *pdev;

 	pdev = to_pci_dev(mci->dev);

 	/*
 	 * This is a mess because there is no atomic way to read all the
 	 * registers at once and the registers can transition from CE being
 	 * overwritten by UE.
 	 */
 	pci_read_config_word(pdev, I3000_ERRSTS, &info->errsts);
 	if (!(info->errsts & I3000_ERRSTS_BITS))
 		return;
 	pci_read_config_byte(pdev, I3000_EDEAP, &info->edeap);
 	pci_read_config_dword(pdev, I3000_DEAP, &info->deap);
 	pci_read_config_byte(pdev, I3000_DERRSYN, &info->derrsyn);
 	pci_read_config_word(pdev, I3000_ERRSTS, &info->errsts2);

 	/*
 	 * If the error is the same for both reads then the first set
 	 * of reads is valid.  If there is a change then there is a CE
 	 * with no info and the second set of reads is valid and
 	 * should be UE info.
 	 */
 	if ((info->errsts ^ info->errsts2) & I3000_ERRSTS_BITS) {
 		pci_read_config_byte(pdev, I3000_EDEAP, &info->edeap);
 		pci_read_config_dword(pdev, I3000_DEAP, &info->deap);
 		pci_read_config_byte(pdev, I3000_DERRSYN, &info->derrsyn);
 	}

 	/*
 	 * Clear any error bits.
 	 * (Yes, we really clear bits by writing 1 to them.)
 	 */
 	pci_write_bits16(pdev, I3000_ERRSTS, I3000_ERRSTS_BITS,
 			 I3000_ERRSTS_BITS);
 }

 static int i3000_process_error_info(struct mem_ctl_info *mci,
 				struct i3000_error_info *info,
 				int handle_errors)
 {
 	int row, multi_chan, channel;
 	unsigned long pfn, offset;

 	multi_chan = mci->csrows[0].nr_channels - 1;

 	if (!(info->errsts & I3000_ERRSTS_BITS))
 		return 0;

 	if (!handle_errors)
 		return 1;

 	if ((info->errsts ^ info->errsts2) & I3000_ERRSTS_BITS) {
 		edac_mc_handle_ce_no_info(mci, "UE overwrote CE");
 		info->errsts = info->errsts2;
 	}

 	pfn = deap_pfn(info->edeap, info->deap);
 	offset = deap_offset(info->deap);
 	channel = deap_channel(info->deap);

 	row = edac_mc_find_csrow_by_page(mci, pfn);

 	if (info->errsts & I3000_ERRSTS_UE)
 		edac_mc_handle_ue(mci, pfn, offset, row, "i3000 UE");
 	else
 		edac_mc_handle_ce(mci, pfn, offset, info->derrsyn, row,
 				multi_chan ? channel : 0, "i3000 CE");

 	return 1;
 }

 static void i3000_check(struct mem_ctl_info *mci)
 {
 	struct i3000_error_info info;

 	debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
 	i3000_get_error_info(mci, &info);
 	i3000_process_error_info(mci, &info, 1);
 }

 static int i3000_is_interleaved(const unsigned char *c0dra,
 				const unsigned char *c1dra,
 				const unsigned char *c0drb,
 				const unsigned char *c1drb)
 {
 	int i;

 	/*
 	 * If the channels aren't populated identically then
 	 * we're not interleaved.
 	 */
 	for (i = 0; i < I3000_RANKS_PER_CHANNEL / 2; i++)
 		if (odd_rank_attrib(c0dra[i]) != odd_rank_attrib(c1dra[i]) ||
 			even_rank_attrib(c0dra[i]) !=
 						even_rank_attrib(c1dra[i]))
 			return 0;

 	/*
 	 * If the rank boundaries for the two channels are different
 	 * then we're not interleaved.
 	 */
 	for (i = 0; i < I3000_RANKS_PER_CHANNEL; i++)
 		if (c0drb[i] != c1drb[i])
 			return 0;

 	return 1;
 }

 static int i3000_probe1(struct pci_dev *pdev, int dev_idx)
 {
 	int rc;
 	int i;
 	struct mem_ctl_info *mci = NULL;
 	unsigned long last_cumul_size;
 	int interleaved, nr_channels;
 	unsigned char dra[I3000_RANKS / 2], drb[I3000_RANKS];
 	unsigned char *c0dra = dra, *c1dra = &dra[I3000_RANKS_PER_CHANNEL / 2];
 	unsigned char *c0drb = drb, *c1drb = &drb[I3000_RANKS_PER_CHANNEL];
 	unsigned long mchbar;
 	void __iomem *window;

 	debugf0("MC: %s()\n", __func__);

 	pci_read_config_dword(pdev, I3000_MCHBAR, (u32 *) & mchbar);
 	mchbar &= I3000_MCHBAR_MASK;
 	window = ioremap_nocache(mchbar, I3000_MMR_WINDOW_SIZE);
 	if (!window) {
 		printk(KERN_ERR "i3000: cannot map mmio space at 0x%lx\n",
 			mchbar);
 		return -ENODEV;
 	}

 	switch (edac_op_state) {
 	case EDAC_OPSTATE_POLL:
 	case EDAC_OPSTATE_NMI:
 		break;
 	default:
 		edac_op_state = EDAC_OPSTATE_POLL;
 		break;
 	}

 	c0dra[0] = readb(window + I3000_C0DRA + 0);	/* ranks 0,1 */
 	c0dra[1] = readb(window + I3000_C0DRA + 1);	/* ranks 2,3 */
 	c1dra[0] = readb(window + I3000_C1DRA + 0);	/* ranks 0,1 */
 	c1dra[1] = readb(window + I3000_C1DRA + 1);	/* ranks 2,3 */

 	for (i = 0; i < I3000_RANKS_PER_CHANNEL; i++) {
 		c0drb[i] = readb(window + I3000_C0DRB + i);
 		c1drb[i] = readb(window + I3000_C1DRB + i);
 	}

 	iounmap(window);

 	/*
 	 * Figure out how many channels we have.
 	 *
 	 * If we have what the datasheet calls "asymmetric channels"
 	 * (essentially the same as what was called "virtual single
 	 * channel mode" in the i82875) then it's a single channel as
 	 * far as EDAC is concerned.
 	 */
 	interleaved = i3000_is_interleaved(c0dra, c1dra, c0drb, c1drb);
 	nr_channels = interleaved ? 2 : 1;
 	mci = edac_mc_alloc(0, I3000_RANKS / nr_channels, nr_channels, 0);
 	if (!mci)
 		return -ENOMEM;

 	debugf3("MC: %s(): init mci\n", __func__);

 	mci->dev = &pdev->dev;
 	mci->mtype_cap = MEM_FLAG_DDR2;

 	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
 	mci->edac_cap = EDAC_FLAG_SECDED;

 	mci->mod_name = EDAC_MOD_STR;
 	mci->mod_ver = I3000_REVISION;
 	mci->ctl_name = i3000_devs[dev_idx].ctl_name;
 	mci->dev_name = pci_name(pdev);
 	mci->edac_check = i3000_check;
 	mci->ctl_page_to_phys = NULL;

 	/*
 	 * The dram rank boundary (DRB) reg values are boundary addresses
 	 * for each DRAM rank with a granularity of 32MB.  DRB regs are
 	 * cumulative; the last one will contain the total memory
 	 * contained in all ranks.
 	 *
 	 * If we're in interleaved mode then we're only walking through
 	 * the ranks of controller 0, so we double all the values we see.
 	 */
 	for (last_cumul_size = i = 0; i < mci->nr_csrows; i++) {
 		u8 value;
 		u32 cumul_size;
 		struct csrow_info *csrow = &mci->csrows[i];

 		value = drb[i];
 		cumul_size = value << (I3000_DRB_SHIFT - PAGE_SHIFT);
 		if (interleaved)
 			cumul_size <<= 1;
 		debugf3("MC: %s(): (%d) cumul_size 0x%x\n",
 			__func__, i, cumul_size);
 		if (cumul_size == last_cumul_size) {
 			csrow->mtype = MEM_EMPTY;
 			continue;
 		}

 		csrow->first_page = last_cumul_size;
 		csrow->last_page = cumul_size - 1;
 		csrow->nr_pages = cumul_size - last_cumul_size;
 		last_cumul_size = cumul_size;
 		csrow->grain = I3000_DEAP_GRAIN;
 		csrow->mtype = MEM_DDR2;
 		csrow->dtype = DEV_UNKNOWN;
 		csrow->edac_mode = EDAC_UNKNOWN;
 	}

 	/*
 	 * Clear any error bits.
 	 * (Yes, we really clear bits by writing 1 to them.)
 	 */
 	pci_write_bits16(pdev, I3000_ERRSTS, I3000_ERRSTS_BITS,
 			 I3000_ERRSTS_BITS);

 	rc = -ENODEV;
 	if (edac_mc_add_mc(mci)) {
 		debugf3("MC: %s(): failed edac_mc_add_mc()\n", __func__);
 		goto fail;
 	}

 	/* allocating generic PCI control info */
 	i3000_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
 	if (!i3000_pci) {
 		printk(KERN_WARNING
 			"%s(): Unable to create PCI control\n",
 			__func__);
 		printk(KERN_WARNING
 			"%s(): PCI error report via EDAC not setup\n",
 			__func__);
 	}

 	/* get this far and it's successful */
 	debugf3("MC: %s(): success\n", __func__);
 	return 0;

 fail:
 	if (mci)
 		edac_mc_free(mci);

 	return rc;
 }

 /* returns count (>= 0), or negative on error */
 static int __devinit i3000_init_one(struct pci_dev *pdev,
 				const struct pci_device_id *ent)
 {
 	int rc;

 	debugf0("MC: %s()\n", __func__);

 	if (pci_enable_device(pdev) < 0)
 		return -EIO;

 	rc = i3000_probe1(pdev, ent->driver_data);
 	if (!mci_pdev)
 		mci_pdev = pci_dev_get(pdev);

 	return rc;
 }

 static void __devexit i3000_remove_one(struct pci_dev *pdev)
 {
 	struct mem_ctl_info *mci;

 	debugf0("%s()\n", __func__);

 	if (i3000_pci)
 		edac_pci_release_generic_ctl(i3000_pci);

 	mci = edac_mc_del_mc(&pdev->dev);
 	if (!mci)
 		return;

 	edac_mc_free(mci);
 }

 static const struct pci_device_id i3000_pci_tbl[] __devinitdata = {
 	{
 	 PCI_VEND_DEV(INTEL, 3000_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 	 I3000},
 	{
 	 0,
 	 }			/* 0 terminated list. */
 };

 MODULE_DEVICE_TABLE(pci, i3000_pci_tbl);

 static struct pci_driver i3000_driver = {
 	.name = EDAC_MOD_STR,
 	.probe = i3000_init_one,
 	.remove = __devexit_p(i3000_remove_one),
 	.id_table = i3000_pci_tbl,
 };

 static int __init i3000_init(void)
 {
 	int pci_rc;

 	debugf3("MC: %s()\n", __func__);
 	pci_rc = pci_register_driver(&i3000_driver);
 	if (pci_rc < 0)
 		goto fail0;

 	if (!mci_pdev) {
 		i3000_registered = 0;
 		mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
 					PCI_DEVICE_ID_INTEL_3000_HB, NULL);
 		if (!mci_pdev) {
 			debugf0("i3000 pci_get_device fail\n");
 			pci_rc = -ENODEV;
 			goto fail1;
 		}

 		pci_rc = i3000_init_one(mci_pdev, i3000_pci_tbl);
 		if (pci_rc < 0) {
 			debugf0("i3000 init fail\n");
 			pci_rc = -ENODEV;
 			goto fail1;
 		}
 	}

 	return 0;

 fail1:
 	pci_unregister_driver(&i3000_driver);

 fail0:
 	if (mci_pdev)
 		pci_dev_put(mci_pdev);

 	return pci_rc;
 }

 static void __exit i3000_exit(void)
 {
 	debugf3("MC: %s()\n", __func__);

 	pci_unregister_driver(&i3000_driver);
 	if (!i3000_registered) {
 		i3000_remove_one(mci_pdev);
 		pci_dev_put(mci_pdev);
 	}
 }

 module_init(i3000_init);
 module_exit(i3000_exit);

 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Akamai Technologies Arthur Ulfeldt/Jason Uhlenkott");
 MODULE_DESCRIPTION("MC support for Intel 3000 memory hub controllers");

 module_param(edac_op_state, int, 0444);
 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");
	/*
	* Intel 3000/3010 Memory Controller kernel module
	* Copyright (C) 2007 Akamai Technologies, Inc.
	* Shamelessly copied from:
	* Intel D82875P Memory Controller kernel module
	* (C) 2003 Linux Networx (http://lnxi.com)
	*
	* This file may be distributed under the terms of the
	* GNU General Public License.
	*/

	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/pci.h>
	#include <linux/pci_ids.h>
	#include <linux/slab.h>
	#include <linux/edac.h>
	#include "edac_core.h"

	#define I3000_REVISION "1.1"

	#define EDAC_MOD_STR "i3000_edac"

	#define I3000_RANKS 8
	#define I3000_RANKS_PER_CHANNEL 4
	#define I3000_CHANNELS 2

	/* Intel 3000 register addresses - device 0 function 0 - DRAM Controller */

	#define I3000_MCHBAR 0x44 /* MCH Memory Mapped Register BAR */
	#define I3000_MCHBAR_MASK 0xffffc000
	#define I3000_MMR_WINDOW_SIZE 16384

	#define I3000_EDEAP 0x70 /* Extended DRAM Error Address Pointer (8b)
	*
	* 7:1 reserved
	* 0 bit 32 of address
	*/
	#define I3000_DEAP 0x58 /* DRAM Error Address Pointer (32b)
	*
	* 31:7 address
	* 6:1 reserved
	* 0 Error channel 0/1
	*/
	#define I3000_DEAP_GRAIN (1 << 7)

	static inline unsigned long deap_pfn(u8 edeap, u32 deap)
	{
	deap >>= PAGE_SHIFT;
	deap \|= (edeap & 1) << (32 - PAGE_SHIFT);
	return deap;
	}

	static inline unsigned long deap_offset(u32 deap)
	{
	return deap & ~(I3000_DEAP_GRAIN - 1) & ~PAGE_MASK;
	}

	static inline int deap_channel(u32 deap)
	{
	return deap & 1;
	}

	#define I3000_DERRSYN 0x5c /* DRAM Error Syndrome (8b)
	*
	* 7:0 DRAM ECC Syndrome
	*/

	#define I3000_ERRSTS 0xc8 /* Error Status Register (16b)
	*
	* 15:12 reserved
	* 11 MCH Thermal Sensor Event
	* for SMI/SCI/SERR
	* 10 reserved
	* 9 LOCK to non-DRAM Memory Flag (LCKF)
	* 8 Received Refresh Timeout Flag (RRTOF)
	* 7:2 reserved
	* 1 Multi-bit DRAM ECC Error Flag (DMERR)
	* 0 Single-bit DRAM ECC Error Flag (DSERR)
	*/
	#define I3000_ERRSTS_BITS 0x0b03 /* bits which indicate errors */
	#define I3000_ERRSTS_UE 0x0002
	#define I3000_ERRSTS_CE 0x0001

	#define I3000_ERRCMD 0xca /* Error Command (16b)
	*
	* 15:12 reserved
	* 11 SERR on MCH Thermal Sensor Event
	* (TSESERR)
	* 10 reserved
	* 9 SERR on LOCK to non-DRAM Memory
	* (LCKERR)
	* 8 SERR on DRAM Refresh Timeout
	* (DRTOERR)
	* 7:2 reserved
	* 1 SERR Multi-Bit DRAM ECC Error
	* (DMERR)
	* 0 SERR on Single-Bit ECC Error
	* (DSERR)
	*/

	/* Intel MMIO register space - device 0 function 0 - MMR space */

	#define I3000_DRB_SHIFT 25 /* 32MiB grain */

	#define I3000_C0DRB 0x100 /* Channel 0 DRAM Rank Boundary (8b x 4)
	*
	* 7:0 Channel 0 DRAM Rank Boundary Address
	*/
	#define I3000_C1DRB 0x180 /* Channel 1 DRAM Rank Boundary (8b x 4)
	*
	* 7:0 Channel 1 DRAM Rank Boundary Address
	*/

	#define I3000_C0DRA 0x108 /* Channel 0 DRAM Rank Attribute (8b x 2)
	*
	* 7 reserved
	* 6:4 DRAM odd Rank Attribute
	* 3 reserved
	* 2:0 DRAM even Rank Attribute
	*
	* Each attribute defines the page
	* size of the corresponding rank:
	* 000: unpopulated
	* 001: reserved
	* 010: 4 KB
	* 011: 8 KB
	* 100: 16 KB
	* Others: reserved
	*/
	#define I3000_C1DRA 0x188 /* Channel 1 DRAM Rank Attribute (8b x 2) */

	static inline unsigned char odd_rank_attrib(unsigned char dra)
	{
	return (dra & 0x70) >> 4;
	}

	static inline unsigned char even_rank_attrib(unsigned char dra)
	{
	return dra & 0x07;
	}

	#define I3000_C0DRC0 0x120 /* DRAM Controller Mode 0 (32b)
	*
	* 31:30 reserved
	* 29 Initialization Complete (IC)
	* 28:11 reserved
	* 10:8 Refresh Mode Select (RMS)
	* 7 reserved
	* 6:4 Mode Select (SMS)
	* 3:2 reserved
	* 1:0 DRAM Type (DT)
	*/

	#define I3000_C0DRC1 0x124 /* DRAM Controller Mode 1 (32b)
	*
	* 31 Enhanced Addressing Enable (ENHADE)
	* 30:0 reserved
	*/

	enum i3000p_chips {
	I3000 = 0,
	};

	struct i3000_dev_info {
	const char *ctl_name;
	};

	struct i3000_error_info {
	u16 errsts;
	u8 derrsyn;
	u8 edeap;
	u32 deap;
	u16 errsts2;
	};

	static const struct i3000_dev_info i3000_devs[] = {
	[I3000] = {
	.ctl_name = "i3000"},
	};

	static struct pci_dev *mci_pdev;
	static int i3000_registered = 1;
	static struct edac_pci_ctl_info *i3000_pci;

	static void i3000_get_error_info(struct mem_ctl_info *mci,
	struct i3000_error_info *info)
	{
	struct pci_dev *pdev;

	pdev = to_pci_dev(mci->dev);

	/*
	* This is a mess because there is no atomic way to read all the
	* registers at once and the registers can transition from CE being
	* overwritten by UE.
	*/
	pci_read_config_word(pdev, I3000_ERRSTS, &info->errsts);
	if (!(info->errsts & I3000_ERRSTS_BITS))
	return;
	pci_read_config_byte(pdev, I3000_EDEAP, &info->edeap);
	pci_read_config_dword(pdev, I3000_DEAP, &info->deap);
	pci_read_config_byte(pdev, I3000_DERRSYN, &info->derrsyn);
	pci_read_config_word(pdev, I3000_ERRSTS, &info->errsts2);

	/*
	* If the error is the same for both reads then the first set
	* of reads is valid. If there is a change then there is a CE
	* with no info and the second set of reads is valid and
	* should be UE info.
	*/
	if ((info->errsts ^ info->errsts2) & I3000_ERRSTS_BITS) {
	pci_read_config_byte(pdev, I3000_EDEAP, &info->edeap);
	pci_read_config_dword(pdev, I3000_DEAP, &info->deap);
	pci_read_config_byte(pdev, I3000_DERRSYN, &info->derrsyn);
	}

	/*
	* Clear any error bits.
	* (Yes, we really clear bits by writing 1 to them.)
	*/
	pci_write_bits16(pdev, I3000_ERRSTS, I3000_ERRSTS_BITS,
	I3000_ERRSTS_BITS);
	}

	static int i3000_process_error_info(struct mem_ctl_info *mci,
	struct i3000_error_info *info,
	int handle_errors)
	{
	int row, multi_chan, channel;
	unsigned long pfn, offset;

	multi_chan = mci->csrows[0].nr_channels - 1;

	if (!(info->errsts & I3000_ERRSTS_BITS))
	return 0;

	if (!handle_errors)
	return 1;

	if ((info->errsts ^ info->errsts2) & I3000_ERRSTS_BITS) {
	edac_mc_handle_ce_no_info(mci, "UE overwrote CE");
	info->errsts = info->errsts2;
	}

	pfn = deap_pfn(info->edeap, info->deap);
	offset = deap_offset(info->deap);
	channel = deap_channel(info->deap);

	row = edac_mc_find_csrow_by_page(mci, pfn);

	if (info->errsts & I3000_ERRSTS_UE)
	edac_mc_handle_ue(mci, pfn, offset, row, "i3000 UE");
	else
	edac_mc_handle_ce(mci, pfn, offset, info->derrsyn, row,
	multi_chan ? channel : 0, "i3000 CE");

	return 1;
	}

	static void i3000_check(struct mem_ctl_info *mci)
	{
	struct i3000_error_info info;

	debugf1("MC%d: %s()\n", mci->mc_idx, __func__);
	i3000_get_error_info(mci, &info);
	i3000_process_error_info(mci, &info, 1);
	}

	static int i3000_is_interleaved(const unsigned char *c0dra,
	const unsigned char *c1dra,
	const unsigned char *c0drb,
	const unsigned char *c1drb)
	{
	int i;

	/*
	* If the channels aren't populated identically then
	* we're not interleaved.
	*/
	for (i = 0; i < I3000_RANKS_PER_CHANNEL / 2; i++)
	if (odd_rank_attrib(c0dra[i]) != odd_rank_attrib(c1dra[i]) \|\|
	even_rank_attrib(c0dra[i]) !=
	even_rank_attrib(c1dra[i]))
	return 0;

	/*
	* If the rank boundaries for the two channels are different
	* then we're not interleaved.
	*/
	for (i = 0; i < I3000_RANKS_PER_CHANNEL; i++)
	if (c0drb[i] != c1drb[i])
	return 0;

	return 1;
	}

	static int i3000_probe1(struct pci_dev *pdev, int dev_idx)
	{
	int rc;
	int i;
	struct mem_ctl_info *mci = NULL;
	unsigned long last_cumul_size;
	int interleaved, nr_channels;
	unsigned char dra[I3000_RANKS / 2], drb[I3000_RANKS];
	unsigned char c0dra = dra, c1dra = &dra[I3000_RANKS_PER_CHANNEL / 2];
	unsigned char c0drb = drb, c1drb = &drb[I3000_RANKS_PER_CHANNEL];
	unsigned long mchbar;
	void __iomem *window;

	debugf0("MC: %s()\n", __func__);

	pci_read_config_dword(pdev, I3000_MCHBAR, (u32 *) & mchbar);
	mchbar &= I3000_MCHBAR_MASK;
	window = ioremap_nocache(mchbar, I3000_MMR_WINDOW_SIZE);
	if (!window) {
	printk(KERN_ERR "i3000: cannot map mmio space at 0x%lx\n",
	mchbar);
	return -ENODEV;
	}

	switch (edac_op_state) {
	case EDAC_OPSTATE_POLL:
	case EDAC_OPSTATE_NMI:
	break;
	default:
	edac_op_state = EDAC_OPSTATE_POLL;
	break;
	}

	c0dra[0] = readb(window + I3000_C0DRA + 0); /* ranks 0,1 */
	c0dra[1] = readb(window + I3000_C0DRA + 1); /* ranks 2,3 */
	c1dra[0] = readb(window + I3000_C1DRA + 0); /* ranks 0,1 */
	c1dra[1] = readb(window + I3000_C1DRA + 1); /* ranks 2,3 */

	for (i = 0; i < I3000_RANKS_PER_CHANNEL; i++) {
	c0drb[i] = readb(window + I3000_C0DRB + i);
	c1drb[i] = readb(window + I3000_C1DRB + i);
	}

	iounmap(window);

	/*
	* Figure out how many channels we have.
	*
	* If we have what the datasheet calls "asymmetric channels"
	* (essentially the same as what was called "virtual single
	* channel mode" in the i82875) then it's a single channel as
	* far as EDAC is concerned.
	*/
	interleaved = i3000_is_interleaved(c0dra, c1dra, c0drb, c1drb);
	nr_channels = interleaved ? 2 : 1;
	mci = edac_mc_alloc(0, I3000_RANKS / nr_channels, nr_channels, 0);
	if (!mci)
	return -ENOMEM;

	debugf3("MC: %s(): init mci\n", __func__);

	mci->dev = &pdev->dev;
	mci->mtype_cap = MEM_FLAG_DDR2;

	mci->edac_ctl_cap = EDAC_FLAG_SECDED;
	mci->edac_cap = EDAC_FLAG_SECDED;

	mci->mod_name = EDAC_MOD_STR;
	mci->mod_ver = I3000_REVISION;
	mci->ctl_name = i3000_devs[dev_idx].ctl_name;
	mci->dev_name = pci_name(pdev);
	mci->edac_check = i3000_check;
	mci->ctl_page_to_phys = NULL;

	/*
	* The dram rank boundary (DRB) reg values are boundary addresses
	* for each DRAM rank with a granularity of 32MB. DRB regs are
	* cumulative; the last one will contain the total memory
	* contained in all ranks.
	*
	* If we're in interleaved mode then we're only walking through
	* the ranks of controller 0, so we double all the values we see.
	*/
	for (last_cumul_size = i = 0; i < mci->nr_csrows; i++) {
	u8 value;
	u32 cumul_size;
	struct csrow_info *csrow = &mci->csrows[i];

	value = drb[i];
	cumul_size = value << (I3000_DRB_SHIFT - PAGE_SHIFT);
	if (interleaved)
	cumul_size <<= 1;
	debugf3("MC: %s(): (%d) cumul_size 0x%x\n",
	__func__, i, cumul_size);
	if (cumul_size == last_cumul_size) {
	csrow->mtype = MEM_EMPTY;
	continue;
	}

	csrow->first_page = last_cumul_size;
	csrow->last_page = cumul_size - 1;
	csrow->nr_pages = cumul_size - last_cumul_size;
	last_cumul_size = cumul_size;
	csrow->grain = I3000_DEAP_GRAIN;
	csrow->mtype = MEM_DDR2;
	csrow->dtype = DEV_UNKNOWN;
	csrow->edac_mode = EDAC_UNKNOWN;
	}

	/*
	* Clear any error bits.
	* (Yes, we really clear bits by writing 1 to them.)
	*/
	pci_write_bits16(pdev, I3000_ERRSTS, I3000_ERRSTS_BITS,
	I3000_ERRSTS_BITS);

	rc = -ENODEV;
	if (edac_mc_add_mc(mci)) {
	debugf3("MC: %s(): failed edac_mc_add_mc()\n", __func__);
	goto fail;
	}

	/* allocating generic PCI control info */
	i3000_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
	if (!i3000_pci) {
	printk(KERN_WARNING
	"%s(): Unable to create PCI control\n",
	__func__);
	printk(KERN_WARNING
	"%s(): PCI error report via EDAC not setup\n",
	__func__);
	}

	/* get this far and it's successful */
	debugf3("MC: %s(): success\n", __func__);
	return 0;

	fail:
	if (mci)
	edac_mc_free(mci);

	return rc;
	}

	/* returns count (>= 0), or negative on error */
	static int __devinit i3000_init_one(struct pci_dev *pdev,
	const struct pci_device_id *ent)
	{
	int rc;

	debugf0("MC: %s()\n", __func__);

	if (pci_enable_device(pdev) < 0)
	return -EIO;

	rc = i3000_probe1(pdev, ent->driver_data);
	if (!mci_pdev)
	mci_pdev = pci_dev_get(pdev);

	return rc;
	}

	static void __devexit i3000_remove_one(struct pci_dev *pdev)
	{
	struct mem_ctl_info *mci;

	debugf0("%s()\n", __func__);

	if (i3000_pci)
	edac_pci_release_generic_ctl(i3000_pci);

	mci = edac_mc_del_mc(&pdev->dev);
	if (!mci)
	return;

	edac_mc_free(mci);
	}

	static const struct pci_device_id i3000_pci_tbl[] __devinitdata = {
	{
	PCI_VEND_DEV(INTEL, 3000_HB), PCI_ANY_ID, PCI_ANY_ID, 0, 0,
	I3000},
	{
	0,
	} /* 0 terminated list. */
	};

	MODULE_DEVICE_TABLE(pci, i3000_pci_tbl);

	static struct pci_driver i3000_driver = {
	.name = EDAC_MOD_STR,
	.probe = i3000_init_one,
	.remove = __devexit_p(i3000_remove_one),
	.id_table = i3000_pci_tbl,
	};

	static int __init i3000_init(void)
	{
	int pci_rc;

	debugf3("MC: %s()\n", __func__);
	pci_rc = pci_register_driver(&i3000_driver);
	if (pci_rc < 0)
	goto fail0;

	if (!mci_pdev) {
	i3000_registered = 0;
	mci_pdev = pci_get_device(PCI_VENDOR_ID_INTEL,
	PCI_DEVICE_ID_INTEL_3000_HB, NULL);
	if (!mci_pdev) {
	debugf0("i3000 pci_get_device fail\n");
	pci_rc = -ENODEV;
	goto fail1;
	}

	pci_rc = i3000_init_one(mci_pdev, i3000_pci_tbl);
	if (pci_rc < 0) {
	debugf0("i3000 init fail\n");
	pci_rc = -ENODEV;
	goto fail1;
	}
	}

	return 0;

	fail1:
	pci_unregister_driver(&i3000_driver);

	fail0:
	if (mci_pdev)
	pci_dev_put(mci_pdev);

	return pci_rc;
	}

	static void __exit i3000_exit(void)
	{
	debugf3("MC: %s()\n", __func__);

	pci_unregister_driver(&i3000_driver);
	if (!i3000_registered) {
	i3000_remove_one(mci_pdev);
	pci_dev_put(mci_pdev);
	}
	}

	module_init(i3000_init);
	module_exit(i3000_exit);

	MODULE_LICENSE("GPL");
	MODULE_AUTHOR("Akamai Technologies Arthur Ulfeldt/Jason Uhlenkott");
	MODULE_DESCRIPTION("MC support for Intel 3000 memory hub controllers");

	module_param(edac_op_state, int, 0444);
	MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");