cxgb4: Add support to enable logging of firmware mailbox commands
Add new /sys/kernel/debug/ support to dump a firmware mailbox command
issued and replies for debugging purpose.
Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 6af5242..b4fceb9 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -359,6 +359,34 @@
unsigned int idma_warn[2]; /* time to warning in HZ */
};
+/* Firmware Mailbox Command/Reply log. All values are in Host-Endian format.
+ * The access and execute times are signed in order to accommodate negative
+ * error returns.
+ */
+struct mbox_cmd {
+ u64 cmd[MBOX_LEN / 8]; /* a Firmware Mailbox Command/Reply */
+ u64 timestamp; /* OS-dependent timestamp */
+ u32 seqno; /* sequence number */
+ s16 access; /* time (ms) to access mailbox */
+ s16 execute; /* time (ms) to execute */
+};
+
+struct mbox_cmd_log {
+ unsigned int size; /* number of entries in the log */
+ unsigned int cursor; /* next position in the log to write */
+ u32 seqno; /* next sequence number */
+ /* variable length mailbox command log starts here */
+};
+
+/* Given a pointer to a Firmware Mailbox Command Log and a log entry index,
+ * return a pointer to the specified entry.
+ */
+static inline struct mbox_cmd *mbox_cmd_log_entry(struct mbox_cmd_log *log,
+ unsigned int entry_idx)
+{
+ return &((struct mbox_cmd *)&(log)[1])[entry_idx];
+}
+
#include "t4fw_api.h"
#define FW_VERSION(chip) ( \
@@ -780,6 +808,10 @@
struct work_struct db_drop_task;
bool tid_release_task_busy;
+ /* support for mailbox command/reply logging */
+#define T4_OS_LOG_MBOX_CMDS 256
+ struct mbox_cmd_log *mbox_log;
+
struct dentry *debugfs_root;
bool use_bd; /* Use SGE Back Door intfc for reading SGE Contexts */
bool trace_rss; /* 1 implies that different RSS flit per filter is
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
index 9506c5c..91fb508 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
@@ -1152,6 +1152,104 @@
.release = seq_release_private
};
+/* Show Firmware Mailbox Command/Reply Log
+ *
+ * Note that we don't do any locking when dumping the Firmware Mailbox Log so
+ * it's possible that we can catch things during a log update and therefore
+ * see partially corrupted log entries. But it's probably Good Enough(tm).
+ * If we ever decide that we want to make sure that we're dumping a coherent
+ * log, we'd need to perform locking in the mailbox logging and in
+ * mboxlog_open() where we'd need to grab the entire mailbox log in one go
+ * like we do for the Firmware Device Log.
+ */
+static int mboxlog_show(struct seq_file *seq, void *v)
+{
+ struct adapter *adapter = seq->private;
+ struct mbox_cmd_log *log = adapter->mbox_log;
+ struct mbox_cmd *entry;
+ int entry_idx, i;
+
+ if (v == SEQ_START_TOKEN) {
+ seq_printf(seq,
+ "%10s %15s %5s %5s %s\n",
+ "Seq#", "Tstamp", "Atime", "Etime",
+ "Command/Reply");
+ return 0;
+ }
+
+ entry_idx = log->cursor + ((uintptr_t)v - 2);
+ if (entry_idx >= log->size)
+ entry_idx -= log->size;
+ entry = mbox_cmd_log_entry(log, entry_idx);
+
+ /* skip over unused entries */
+ if (entry->timestamp == 0)
+ return 0;
+
+ seq_printf(seq, "%10u %15llu %5d %5d",
+ entry->seqno, entry->timestamp,
+ entry->access, entry->execute);
+ for (i = 0; i < MBOX_LEN / 8; i++) {
+ u64 flit = entry->cmd[i];
+ u32 hi = (u32)(flit >> 32);
+ u32 lo = (u32)flit;
+
+ seq_printf(seq, " %08x %08x", hi, lo);
+ }
+ seq_puts(seq, "\n");
+ return 0;
+}
+
+static inline void *mboxlog_get_idx(struct seq_file *seq, loff_t pos)
+{
+ struct adapter *adapter = seq->private;
+ struct mbox_cmd_log *log = adapter->mbox_log;
+
+ return ((pos <= log->size) ? (void *)(uintptr_t)(pos + 1) : NULL);
+}
+
+static void *mboxlog_start(struct seq_file *seq, loff_t *pos)
+{
+ return *pos ? mboxlog_get_idx(seq, *pos) : SEQ_START_TOKEN;
+}
+
+static void *mboxlog_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ ++*pos;
+ return mboxlog_get_idx(seq, *pos);
+}
+
+static void mboxlog_stop(struct seq_file *seq, void *v)
+{
+}
+
+static const struct seq_operations mboxlog_seq_ops = {
+ .start = mboxlog_start,
+ .next = mboxlog_next,
+ .stop = mboxlog_stop,
+ .show = mboxlog_show
+};
+
+static int mboxlog_open(struct inode *inode, struct file *file)
+{
+ int res = seq_open(file, &mboxlog_seq_ops);
+
+ if (!res) {
+ struct seq_file *seq = file->private_data;
+
+ seq->private = inode->i_private;
+ }
+ return res;
+}
+
+static const struct file_operations mboxlog_fops = {
+ .owner = THIS_MODULE,
+ .open = mboxlog_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
static int mbox_show(struct seq_file *seq, void *v)
{
static const char * const owner[] = { "none", "FW", "driver",
@@ -3129,6 +3227,7 @@
{ "cim_qcfg", &cim_qcfg_fops, S_IRUSR, 0 },
{ "clk", &clk_debugfs_fops, S_IRUSR, 0 },
{ "devlog", &devlog_fops, S_IRUSR, 0 },
+ { "mboxlog", &mboxlog_fops, S_IRUSR, 0 },
{ "mbox0", &mbox_debugfs_fops, S_IRUSR | S_IWUSR, 0 },
{ "mbox1", &mbox_debugfs_fops, S_IRUSR | S_IWUSR, 1 },
{ "mbox2", &mbox_debugfs_fops, S_IRUSR | S_IWUSR, 2 },
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
index 4f627f3..d7f4043 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
@@ -4909,6 +4909,16 @@
goto out_free_adapter;
}
+ adapter->mbox_log = kzalloc(sizeof(*adapter->mbox_log) +
+ (sizeof(struct mbox_cmd) *
+ T4_OS_LOG_MBOX_CMDS),
+ GFP_KERNEL);
+ if (!adapter->mbox_log) {
+ err = -ENOMEM;
+ goto out_free_adapter;
+ }
+ adapter->mbox_log->size = T4_OS_LOG_MBOX_CMDS;
+
/* PCI device has been enabled */
adapter->flags |= DEV_ENABLED;
@@ -5167,6 +5177,7 @@
if (adapter->workq)
destroy_workqueue(adapter->workq);
+ kfree(adapter->mbox_log);
kfree(adapter);
out_unmap_bar0:
iounmap(regs);
@@ -5233,6 +5244,7 @@
adapter->flags &= ~DEV_ENABLED;
}
pci_release_regions(pdev);
+ kfree(adapter->mbox_log);
synchronize_rcu();
kfree(adapter);
} else
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 7907d85..49bcbf1 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -224,18 +224,34 @@
be32_to_cpu(asrt.u.assert.x), be32_to_cpu(asrt.u.assert.y));
}
-static void dump_mbox(struct adapter *adap, int mbox, u32 data_reg)
+/**
+ * t4_record_mbox - record a Firmware Mailbox Command/Reply in the log
+ * @adapter: the adapter
+ * @cmd: the Firmware Mailbox Command or Reply
+ * @size: command length in bytes
+ * @access: the time (ms) needed to access the Firmware Mailbox
+ * @execute: the time (ms) the command spent being executed
+ */
+static void t4_record_mbox(struct adapter *adapter,
+ const __be64 *cmd, unsigned int size,
+ int access, int execute)
{
- dev_err(adap->pdev_dev,
- "mbox %d: %llx %llx %llx %llx %llx %llx %llx %llx\n", mbox,
- (unsigned long long)t4_read_reg64(adap, data_reg),
- (unsigned long long)t4_read_reg64(adap, data_reg + 8),
- (unsigned long long)t4_read_reg64(adap, data_reg + 16),
- (unsigned long long)t4_read_reg64(adap, data_reg + 24),
- (unsigned long long)t4_read_reg64(adap, data_reg + 32),
- (unsigned long long)t4_read_reg64(adap, data_reg + 40),
- (unsigned long long)t4_read_reg64(adap, data_reg + 48),
- (unsigned long long)t4_read_reg64(adap, data_reg + 56));
+ struct mbox_cmd_log *log = adapter->mbox_log;
+ struct mbox_cmd *entry;
+ int i;
+
+ entry = mbox_cmd_log_entry(log, log->cursor++);
+ if (log->cursor == log->size)
+ log->cursor = 0;
+
+ for (i = 0; i < size / 8; i++)
+ entry->cmd[i] = be64_to_cpu(cmd[i]);
+ while (i < MBOX_LEN / 8)
+ entry->cmd[i++] = 0;
+ entry->timestamp = jiffies;
+ entry->seqno = log->seqno++;
+ entry->access = access;
+ entry->execute = execute;
}
/**
@@ -268,12 +284,15 @@
1, 1, 3, 5, 10, 10, 20, 50, 100, 200
};
+ u16 access = 0;
+ u16 execute = 0;
u32 v;
u64 res;
- int i, ms, delay_idx;
+ int i, ms, delay_idx, ret;
const __be64 *p = cmd;
u32 data_reg = PF_REG(mbox, CIM_PF_MAILBOX_DATA_A);
u32 ctl_reg = PF_REG(mbox, CIM_PF_MAILBOX_CTRL_A);
+ __be64 cmd_rpl[MBOX_LEN / 8];
if ((size & 15) || size > MBOX_LEN)
return -EINVAL;
@@ -289,9 +308,14 @@
for (i = 0; v == MBOX_OWNER_NONE && i < 3; i++)
v = MBOWNER_G(t4_read_reg(adap, ctl_reg));
- if (v != MBOX_OWNER_DRV)
- return v ? -EBUSY : -ETIMEDOUT;
+ if (v != MBOX_OWNER_DRV) {
+ ret = (v == MBOX_OWNER_FW) ? -EBUSY : -ETIMEDOUT;
+ t4_record_mbox(adap, cmd, MBOX_LEN, access, ret);
+ return ret;
+ }
+ /* Copy in the new mailbox command and send it on its way ... */
+ t4_record_mbox(adap, cmd, MBOX_LEN, access, 0);
for (i = 0; i < size; i += 8)
t4_write_reg64(adap, data_reg + i, be64_to_cpu(*p++));
@@ -317,26 +341,31 @@
continue;
}
- res = t4_read_reg64(adap, data_reg);
+ get_mbox_rpl(adap, cmd_rpl, MBOX_LEN / 8, data_reg);
+ res = be64_to_cpu(cmd_rpl[0]);
+
if (FW_CMD_OP_G(res >> 32) == FW_DEBUG_CMD) {
fw_asrt(adap, data_reg);
res = FW_CMD_RETVAL_V(EIO);
} else if (rpl) {
- get_mbox_rpl(adap, rpl, size / 8, data_reg);
+ memcpy(rpl, cmd_rpl, size);
}
- if (FW_CMD_RETVAL_G((int)res))
- dump_mbox(adap, mbox, data_reg);
t4_write_reg(adap, ctl_reg, 0);
+
+ execute = i + ms;
+ t4_record_mbox(adap, cmd_rpl,
+ MBOX_LEN, access, execute);
return -FW_CMD_RETVAL_G((int)res);
}
}
- dump_mbox(adap, mbox, data_reg);
+ ret = -ETIMEDOUT;
+ t4_record_mbox(adap, cmd, MBOX_LEN, access, ret);
dev_err(adap->pdev_dev, "command %#x in mailbox %d timed out\n",
*(const u8 *)cmd, mbox);
t4_report_fw_error(adap);
- return -ETIMEDOUT;
+ return ret;
}
int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size,