| # |
| # Input core configuration |
| # |
| config SERIO |
| tristate "Serial I/O support" if EXPERT || !X86 |
| default y |
| help |
| Say Yes here if you have any input device that uses serial I/O to |
| communicate with the system. This includes the |
| * standard AT keyboard and PS/2 mouse * |
| as well as serial mice, Sun keyboards, some joysticks and 6dof |
| devices and more. |
| |
| If unsure, say Y. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called serio. |
| |
| if SERIO |
| |
| config SERIO_I8042 |
| tristate "i8042 PC Keyboard controller" if EXPERT || !X86 |
| default y |
| depends on !PARISC && (!ARM || ARCH_SHARK || FOOTBRIDGE_HOST) && \ |
| (!SUPERH || SH_CAYMAN) && !M68K && !BLACKFIN && !S390 |
| help |
| i8042 is the chip over which the standard AT keyboard and PS/2 |
| mouse are connected to the computer. If you use these devices, |
| you'll need to say Y here. |
| |
| If unsure, say Y. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called i8042. |
| |
| config SERIO_SERPORT |
| tristate "Serial port line discipline" |
| default y |
| depends on TTY |
| help |
| Say Y here if you plan to use an input device (mouse, joystick, |
| tablet, 6dof) that communicates over the RS232 serial (COM) port. |
| |
| More information is available: <file:Documentation/input/input.txt> |
| |
| If unsure, say Y. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called serport. |
| |
| config SERIO_CT82C710 |
| tristate "ct82c710 Aux port controller" |
| depends on X86 |
| help |
| Say Y here if you have a Texas Instruments TravelMate notebook |
| equipped with the ct82c710 chip and want to use a mouse connected |
| to the "QuickPort". |
| |
| If unsure, say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ct82c710. |
| |
| config SERIO_Q40KBD |
| tristate "Q40 keyboard controller" |
| depends on Q40 |
| |
| config SERIO_PARKBD |
| tristate "Parallel port keyboard adapter" |
| depends on PARPORT |
| help |
| Say Y here if you built a simple parallel port adapter to attach |
| an additional AT keyboard, XT keyboard or PS/2 mouse. |
| |
| More information is available: <file:Documentation/input/input.txt> |
| |
| If unsure, say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called parkbd. |
| |
| config SERIO_RPCKBD |
| tristate "Acorn RiscPC keyboard controller" |
| depends on ARCH_ACORN |
| default y |
| help |
| Say Y here if you have the Acorn RiscPC and want to use an AT |
| keyboard connected to its keyboard controller. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called rpckbd. |
| |
| config SERIO_AT32PSIF |
| tristate "AVR32 PSIF PS/2 keyboard and mouse controller" |
| depends on AVR32 |
| help |
| Say Y here if you want to use the PSIF peripheral on AVR32 devices |
| and connect a PS/2 keyboard and/or mouse to it. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called at32psif. |
| |
| config SERIO_AMBAKMI |
| tristate "AMBA KMI keyboard controller" |
| depends on ARM_AMBA |
| |
| config SERIO_SA1111 |
| tristate "Intel SA1111 keyboard controller" |
| depends on SA1111 |
| |
| config SERIO_GSCPS2 |
| tristate "HP GSC PS/2 keyboard and PS/2 mouse controller" |
| depends on GSC |
| default y |
| help |
| This driver provides support for the PS/2 ports on PA-RISC machines |
| over which HP PS/2 keyboards and PS/2 mice may be connected. |
| If you use these devices, you'll need to say Y here. |
| |
| It's safe to enable this driver, so if unsure, say Y. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gscps2. |
| |
| config HP_SDC |
| tristate "HP System Device Controller i8042 Support" |
| depends on (GSC || HP300) && SERIO |
| default y |
| help |
| This option enables support for the "System Device |
| Controller", an i8042 carrying microcode to manage a |
| few miscellaneous devices on some Hewlett Packard systems. |
| The SDC itself contains a 10ms resolution timer/clock capable |
| of delivering interrupts on a periodic and one-shot basis. |
| The SDC may also be connected to a battery-backed real-time |
| clock, a basic audio waveform generator, and an HP-HIL Master |
| Link Controller serving up to seven input devices. |
| |
| By itself this option is rather useless, but enabling it will |
| enable selection of drivers for the abovementioned devices. |
| It is, however, incompatible with the old, reliable HIL keyboard |
| driver, and the new HIL driver is experimental, so if you plan |
| to use a HIL keyboard as your primary keyboard, you may wish |
| to keep using that driver until the new HIL drivers have had |
| more testing. |
| |
| config HIL_MLC |
| tristate "HIL MLC Support (needed for HIL input devices)" |
| depends on HP_SDC |
| |
| config SERIO_PCIPS2 |
| tristate "PCI PS/2 keyboard and PS/2 mouse controller" |
| depends on PCI |
| help |
| Say Y here if you have a Mobility Docking station with PS/2 |
| keyboard and mice ports. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called pcips2. |
| |
| config SERIO_MACEPS2 |
| tristate "SGI O2 MACE PS/2 controller" |
| depends on SGI_IP32 |
| help |
| Say Y here if you have SGI O2 workstation and want to use its |
| PS/2 ports. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called maceps2. |
| |
| config SERIO_LIBPS2 |
| tristate "PS/2 driver library" if EXPERT |
| depends on SERIO_I8042 || SERIO_I8042=n |
| help |
| Say Y here if you are using a driver for device connected |
| to a PS/2 port, such as PS/2 mouse or standard AT keyboard. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called libps2. |
| |
| config SERIO_RAW |
| tristate "Raw access to serio ports" |
| help |
| Say Y here if you want to have raw access to serio ports, such as |
| AUX ports on i8042 keyboard controller. Each serio port that is |
| bound to this driver will be accessible via a char device with |
| major 10 and dynamically allocated minor. The driver will try |
| allocating minor 1 (that historically corresponds to /dev/psaux) |
| first. To bind this driver to a serio port use sysfs interface: |
| |
| echo -n "serio_raw" > /sys/bus/serio/devices/serioX/drvctl |
| |
| To compile this driver as a module, choose M here: the |
| module will be called serio_raw. |
| |
| config SERIO_XILINX_XPS_PS2 |
| tristate "Xilinx XPS PS/2 Controller Support" |
| depends on PPC || MICROBLAZE |
| help |
| This driver supports XPS PS/2 IP from the Xilinx EDK on |
| PowerPC platform. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called xilinx_ps2. |
| |
| config SERIO_ALTERA_PS2 |
| tristate "Altera UP PS/2 controller" |
| help |
| Say Y here if you have Altera University Program PS/2 ports. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called altera_ps2. |
| |
| config SERIO_AMS_DELTA |
| tristate "Amstrad Delta (E3) mailboard support" |
| depends on MACH_AMS_DELTA |
| default y |
| ---help--- |
| Say Y here if you have an E3 and want to use its mailboard, |
| or any standard AT keyboard connected to the mailboard port. |
| |
| When used for the E3 mailboard, a non-standard key table |
| must be loaded from userspace, possibly using udev extras |
| provided keymap helper utility. |
| |
| To compile this driver as a module, choose M here; |
| the module will be called ams_delta_serio. |
| |
| config SERIO_PS2MULT |
| tristate "TQC PS/2 multiplexer" |
| help |
| Say Y here if you have the PS/2 line multiplexer like the one |
| present on TQC boards. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called ps2mult. |
| |
| config SERIO_ARC_PS2 |
| tristate "ARC PS/2 support" |
| depends on GENERIC_HARDIRQS |
| help |
| Say Y here if you have an ARC FPGA platform with a PS/2 |
| controller in it. |
| |
| To compile this driver as a module, choose M here; the module |
| will be called arc_ps2. |
| |
| config SERIO_APBPS2 |
| tristate "GRLIB APBPS2 PS/2 keyboard/mouse controller" |
| depends on OF |
| help |
| Say Y here if you want support for GRLIB APBPS2 peripherals used |
| to connect to PS/2 keyboard and/or mouse. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called apbps2. |
| |
| config SERIO_OLPC_APSP |
| tristate "OLPC AP-SP input support" |
| depends on OF |
| help |
| Say Y here if you want support for the keyboard and touchpad included |
| in the OLPC XO-1.75 and XO-4 laptops. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called olpc_apsp. |
| |
| endif |