powerpc/powernv: Introduce new PHB type for opencapi links
The NPU was already abstracted by opal as a virtual PHB for nvlink,
but it helps to be able to differentiate between a nvlink or opencapi
PHB, as it's not completely transparent to linux. In particular, PE
assignment differs and we'll also need the information in later
patches.
So rename existing PNV_PHB_NPU type to PNV_PHB_NPU_NVLINK and add a
new type PNV_PHB_NPU_OCAPI.
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 973cfb6..c1e2356 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -54,7 +54,8 @@
#define POWERNV_IOMMU_DEFAULT_LEVELS 1
#define POWERNV_IOMMU_MAX_LEVELS 5
-static const char * const pnv_phb_names[] = { "IODA1", "IODA2", "NPU" };
+static const char * const pnv_phb_names[] = { "IODA1", "IODA2", "NPU_NVLINK",
+ "NPU_OCAPI" };
static void pnv_pci_ioda2_table_free_pages(struct iommu_table *tbl);
void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level,
@@ -933,7 +934,7 @@
* Configure PELTV. NPUs don't have a PELTV table so skip
* configuration on them.
*/
- if (phb->type != PNV_PHB_NPU)
+ if (phb->type != PNV_PHB_NPU_NVLINK && phb->type != PNV_PHB_NPU_OCAPI)
pnv_ioda_set_peltv(phb, pe, true);
/* Setup reverse map */
@@ -1281,16 +1282,23 @@
{
struct pci_controller *hose, *tmp;
struct pnv_phb *phb;
+ struct pci_bus *bus;
+ struct pci_dev *pdev;
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
phb = hose->private_data;
- if (phb->type == PNV_PHB_NPU) {
+ if (phb->type == PNV_PHB_NPU_NVLINK) {
/* PE#0 is needed for error reporting */
pnv_ioda_reserve_pe(phb, 0);
pnv_ioda_setup_npu_PEs(hose->bus);
if (phb->model == PNV_PHB_MODEL_NPU2)
pnv_npu2_init(phb);
}
+ if (phb->type == PNV_PHB_NPU_OCAPI) {
+ bus = hose->bus;
+ list_for_each_entry(pdev, &bus->devices, bus_list)
+ pnv_ioda_setup_dev_PE(pdev);
+ }
}
}
@@ -2648,7 +2656,7 @@
hose = pci_bus_to_host(pdev->bus);
phb = hose->private_data;
- if (phb->type != PNV_PHB_NPU)
+ if (phb->type != PNV_PHB_NPU_NVLINK)
return 0;
*ptmppe = &phb->ioda.pe_array[pdn->pe_number];
@@ -2732,7 +2740,7 @@
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
phb = hose->private_data;
- if (phb->type != PNV_PHB_NPU)
+ if (phb->type != PNV_PHB_NPU_NVLINK)
continue;
list_for_each_entry(pe, &phb->ioda.pe_list, list) {
@@ -3782,6 +3790,13 @@
.shutdown = pnv_pci_ioda_shutdown,
};
+static const struct pci_controller_ops pnv_npu_ocapi_ioda_controller_ops = {
+ .enable_device_hook = pnv_pci_enable_device_hook,
+ .window_alignment = pnv_pci_window_alignment,
+ .reset_secondary_bus = pnv_pci_reset_secondary_bus,
+ .shutdown = pnv_pci_ioda_shutdown,
+};
+
#ifdef CONFIG_CXL_BASE
const struct pci_controller_ops pnv_cxl_cx4_ioda_controller_ops = {
.dma_dev_setup = pnv_pci_dma_dev_setup,
@@ -4015,9 +4030,14 @@
*/
ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;
- if (phb->type == PNV_PHB_NPU) {
+ switch (phb->type) {
+ case PNV_PHB_NPU_NVLINK:
hose->controller_ops = pnv_npu_ioda_controller_ops;
- } else {
+ break;
+ case PNV_PHB_NPU_OCAPI:
+ hose->controller_ops = pnv_npu_ocapi_ioda_controller_ops;
+ break;
+ default:
phb->dma_dev_setup = pnv_pci_ioda_dma_dev_setup;
hose->controller_ops = pnv_pci_ioda_controller_ops;
}
@@ -4063,7 +4083,12 @@
void __init pnv_pci_init_npu_phb(struct device_node *np)
{
- pnv_pci_init_ioda_phb(np, 0, PNV_PHB_NPU);
+ pnv_pci_init_ioda_phb(np, 0, PNV_PHB_NPU_NVLINK);
+}
+
+void __init pnv_pci_init_npu2_opencapi_phb(struct device_node *np)
+{
+ pnv_pci_init_ioda_phb(np, 0, PNV_PHB_NPU_OCAPI);
}
void __init pnv_pci_init_ioda_hub(struct device_node *np)