[SCSI] mpt2sas: Modify code to support Expander switch
Issue : Switch swap doesn't work when device missing delay is enabled.
(1) add support to individually add and remove phys to and from
existing ports. This replaces the routine
_transport_delete_duplicate_port.
(2) _scsih_sas_host_refresh - was modified to change the link rate
from zero to 1.5 GB rate when the firmware reports there is an
attached device with zero link.
(3) add new function mpt2sas_device_remove, this is wrapper function
deletes some redundant code through out driver by combining into one
subrountine
(4) two subroutines were modified so the sas_device, raid_device, and
port lists are traversed once when objects are deleted from the list.
Previously it was looping back each time an object was deleted from the
list.
Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 3e9c78a..50c6bdf 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -2584,9 +2584,9 @@
&sas_expander->sas_port_list, port_list) {
if (mpt2sas_port->remote_identify.device_type ==
- MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
+ SAS_EDGE_EXPANDER_DEVICE ||
mpt2sas_port->remote_identify.device_type ==
- MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) {
+ SAS_FANOUT_EXPANDER_DEVICE) {
spin_lock_irqsave(&ioc->sas_node_lock, flags);
expander_sibling =
@@ -3972,6 +3972,7 @@
Mpi2ConfigReply_t mpi_reply;
Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
u16 attached_handle;
+ u8 link_rate;
dtmprintk(ioc, printk(MPT2SAS_INFO_FMT
"updating handles for sas_host(0x%016llx)\n",
@@ -3993,15 +3994,17 @@
if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
goto out;
for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
+ link_rate = sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4;
if (i == 0)
ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
PhyData[0].ControllerDevHandle);
ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i].
AttachedDevHandle);
+ if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
+ link_rate = MPI2_SAS_NEG_LINK_RATE_1_5;
mpt2sas_transport_update_links(ioc, ioc->sas_hba.sas_address,
- attached_handle, i, sas_iounit_pg0->PhyData[i].
- NegotiatedLinkRate >> 4);
+ attached_handle, i, link_rate);
}
out:
kfree(sas_iounit_pg0);
@@ -4345,14 +4348,14 @@
}
/**
- * _scsih_expander_remove - removing expander object
+ * mpt2sas_expander_remove - removing expander object
* @ioc: per adapter object
* @sas_address: expander sas_address
*
* Return nothing.
*/
-static void
-_scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
+void
+mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
{
struct _sas_node *sas_expander;
unsigned long flags;
@@ -4363,6 +4366,11 @@
spin_lock_irqsave(&ioc->sas_node_lock, flags);
sas_expander = mpt2sas_scsih_expander_find_by_sas_address(ioc,
sas_address);
+ if (!sas_expander) {
+ spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
+ return;
+ }
+ list_del(&sas_expander->list);
spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
_scsih_expander_node_remove(ioc, sas_expander);
}
@@ -4652,6 +4660,33 @@
sas_device_backup.sas_address));
}
+/**
+ * mpt2sas_device_remove - removing device object
+ * @ioc: per adapter object
+ * @sas_address: expander sas_address
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_device_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address)
+{
+ struct _sas_device *sas_device;
+ unsigned long flags;
+
+ if (ioc->shost_recovery)
+ return;
+
+ spin_lock_irqsave(&ioc->sas_device_lock, flags);
+ sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
+ sas_address);
+ if (!sas_device) {
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
+ _scsih_remove_device(ioc, sas_device);
+}
+
#ifdef CONFIG_SCSI_MPT2SAS_LOGGING
/**
* _scsih_sas_topology_change_event_debug - debug for topology event
@@ -4853,7 +4888,7 @@
/* handle expander removal */
if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING &&
sas_expander)
- _scsih_expander_remove(ioc, sas_address);
+ mpt2sas_expander_remove(ioc, sas_address);
}
@@ -6228,7 +6263,7 @@
sas_expander->responding = 0;
continue;
}
- _scsih_expander_remove(ioc, sas_expander->sas_address);
+ mpt2sas_expander_remove(ioc, sas_expander->sas_address);
goto retry_expander_search;
}
}
@@ -6499,56 +6534,23 @@
_scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
struct _sas_node *sas_expander)
{
- struct _sas_port *mpt2sas_port;
- struct _sas_device *sas_device;
- struct _sas_node *expander_sibling;
- unsigned long flags;
-
- if (!sas_expander)
- return;
+ struct _sas_port *mpt2sas_port, *next;
/* remove sibling ports attached to this expander */
- retry_device_search:
- list_for_each_entry(mpt2sas_port,
+ list_for_each_entry_safe(mpt2sas_port, next,
&sas_expander->sas_port_list, port_list) {
+ if (ioc->shost_recovery)
+ return;
if (mpt2sas_port->remote_identify.device_type ==
- SAS_END_DEVICE) {
- spin_lock_irqsave(&ioc->sas_device_lock, flags);
- sas_device =
- mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
- mpt2sas_port->remote_identify.sas_address);
- spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
- if (!sas_device)
- continue;
- _scsih_remove_device(ioc, sas_device);
- if (ioc->shost_recovery)
- return;
- goto retry_device_search;
- }
- }
-
- retry_expander_search:
- list_for_each_entry(mpt2sas_port,
- &sas_expander->sas_port_list, port_list) {
-
- if (mpt2sas_port->remote_identify.device_type ==
- MPI2_SAS_DEVICE_INFO_EDGE_EXPANDER ||
+ SAS_END_DEVICE)
+ mpt2sas_device_remove(ioc,
+ mpt2sas_port->remote_identify.sas_address);
+ else if (mpt2sas_port->remote_identify.device_type ==
+ SAS_EDGE_EXPANDER_DEVICE ||
mpt2sas_port->remote_identify.device_type ==
- MPI2_SAS_DEVICE_INFO_FANOUT_EXPANDER) {
-
- spin_lock_irqsave(&ioc->sas_node_lock, flags);
- expander_sibling =
- mpt2sas_scsih_expander_find_by_sas_address(
- ioc, mpt2sas_port->remote_identify.sas_address);
- spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
- if (!expander_sibling)
- continue;
- _scsih_expander_remove(ioc,
- expander_sibling->sas_address);
- if (ioc->shost_recovery)
- return;
- goto retry_expander_search;
- }
+ SAS_FANOUT_EXPANDER_DEVICE)
+ mpt2sas_expander_remove(ioc,
+ mpt2sas_port->remote_identify.sas_address);
}
mpt2sas_transport_port_remove(ioc, sas_expander->sas_address,
@@ -6559,7 +6561,6 @@
sas_expander->handle, (unsigned long long)
sas_expander->sas_address);
- list_del(&sas_expander->list);
kfree(sas_expander->phy);
kfree(sas_expander);
}
@@ -6677,9 +6678,7 @@
{
struct Scsi_Host *shost = pci_get_drvdata(pdev);
struct MPT2SAS_ADAPTER *ioc = shost_priv(shost);
- struct _sas_port *mpt2sas_port;
- struct _sas_device *sas_device;
- struct _sas_node *expander_sibling;
+ struct _sas_port *mpt2sas_port, *next_port;
struct _raid_device *raid_device, *next;
struct MPT2SAS_TARGET *sas_target_priv_data;
struct workqueue_struct *wq;
@@ -6711,28 +6710,18 @@
}
/* free ports attached to the sas_host */
- retry_again:
- list_for_each_entry(mpt2sas_port,
+ list_for_each_entry_safe(mpt2sas_port, next_port,
&ioc->sas_hba.sas_port_list, port_list) {
if (mpt2sas_port->remote_identify.device_type ==
- SAS_END_DEVICE) {
- sas_device =
- mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
- mpt2sas_port->remote_identify.sas_address);
- if (sas_device) {
- _scsih_remove_device(ioc, sas_device);
- goto retry_again;
- }
- } else {
- expander_sibling =
- mpt2sas_scsih_expander_find_by_sas_address(ioc,
+ SAS_END_DEVICE)
+ mpt2sas_device_remove(ioc,
mpt2sas_port->remote_identify.sas_address);
- if (expander_sibling) {
- _scsih_expander_remove(ioc,
- expander_sibling->sas_address);
- goto retry_again;
- }
- }
+ else if (mpt2sas_port->remote_identify.device_type ==
+ SAS_EDGE_EXPANDER_DEVICE ||
+ mpt2sas_port->remote_identify.device_type ==
+ SAS_FANOUT_EXPANDER_DEVICE)
+ mpt2sas_expander_remove(ioc,
+ mpt2sas_port->remote_identify.sas_address);
}
/* free phys attached to the sas_host */