video: exynos_dp: Use the generic PHY driver
Use the generic PHY API to control the DP PHY.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/Documentation/devicetree/bindings/video/exynos_dp.txt b/Documentation/devicetree/bindings/video/exynos_dp.txt
index 84f10c1..3289d76 100644
--- a/Documentation/devicetree/bindings/video/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dp.txt
@@ -6,10 +6,10 @@
-dptx-phy node(defined inside dp-controller node)
For the DP-PHY initialization, we use the dptx-phy node.
-Required properties for dptx-phy:
- -reg:
+Required properties for dptx-phy: deprecated, use phys and phy-names
+ -reg: deprecated
Base address of DP PHY register.
- -samsung,enable-mask:
+ -samsung,enable-mask: deprecated
The bit-mask used to enable/disable DP PHY.
For the Panel initialization, we read data from dp-controller node.
@@ -27,6 +27,10 @@
from common clock binding: Shall be "dp".
-interrupt-parent:
phandle to Interrupt combiner node.
+ -phys:
+ from general PHY binding: the phandle for the PHY device.
+ -phy-names:
+ from general PHY binding: Should be "dp".
-samsung,color-space:
input video data format.
COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
@@ -68,11 +72,8 @@
clocks = <&clock 342>;
clock-names = "dp";
- dptx-phy {
- reg = <0x10040720>;
- samsung,enable-mask = <1>;
- };
-
+ phys = <&dp_phy>;
+ phy-names = "dp";
};
Board Specific portion:
diff --git a/drivers/video/exynos/exynos_dp_core.c b/drivers/video/exynos/exynos_dp_core.c
index 05fed7d..5e1a715 100644
--- a/drivers/video/exynos/exynos_dp_core.c
+++ b/drivers/video/exynos/exynos_dp_core.c
@@ -19,6 +19,7 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/of.h>
+#include <linux/phy/phy.h>
#include "exynos_dp_core.h"
@@ -960,8 +961,11 @@
dp_phy_node = of_find_node_by_name(dp_phy_node, "dptx-phy");
if (!dp_phy_node) {
- dev_err(dp->dev, "could not find dptx-phy node\n");
- return -ENODEV;
+ dp->phy = devm_phy_get(dp->dev, "dp");
+ if (IS_ERR(dp->phy))
+ return PTR_ERR(dp->phy);
+ else
+ return 0;
}
if (of_property_read_u32(dp_phy_node, "reg", &phy_base)) {
@@ -992,7 +996,9 @@
static void exynos_dp_phy_init(struct exynos_dp_device *dp)
{
- if (dp->phy_addr) {
+ if (dp->phy) {
+ phy_power_on(dp->phy);
+ } else if (dp->phy_addr) {
u32 reg;
reg = __raw_readl(dp->phy_addr);
@@ -1003,7 +1009,9 @@
static void exynos_dp_phy_exit(struct exynos_dp_device *dp)
{
- if (dp->phy_addr) {
+ if (dp->phy) {
+ phy_power_off(dp->phy);
+ } else if (dp->phy_addr) {
u32 reg;
reg = __raw_readl(dp->phy_addr);
diff --git a/drivers/video/exynos/exynos_dp_core.h b/drivers/video/exynos/exynos_dp_core.h
index 56cfec8..607e36d 100644
--- a/drivers/video/exynos/exynos_dp_core.h
+++ b/drivers/video/exynos/exynos_dp_core.h
@@ -151,6 +151,7 @@
struct video_info *video_info;
struct link_train link_train;
struct work_struct hotplug_work;
+ struct phy *phy;
};
/* exynos_dp_reg.c */