arch/parisc/kernel/inventory.c - kernel/msm-4.19 - Gitiles

 /*
  * inventory.c
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  *
  * Copyright (c) 1999 The Puffin Group (David Kennedy and Alex deVries)
  * Copyright (c) 2001 Matthew Wilcox for Hewlett-Packard
  *
  * These are the routines to discover what hardware exists in this box.
  * This task is complicated by there being 3 different ways of
  * performing an inventory, depending largely on the age of the box.
  * The recommended way to do this is to check to see whether the machine
  * is a `Snake' first, then try System Map, then try PAT.  We try System
  * Map before checking for a Snake -- this probably doesn't cause any
  * problems, but...
  */

 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <asm/hardware.h>
 #include <asm/io.h>
 #include <asm/mmzone.h>
 #include <asm/pdc.h>
 #include <asm/pdcpat.h>
 #include <asm/processor.h>
 #include <asm/page.h>
 #include <asm/parisc-device.h>

 /*
 ** Debug options
 ** DEBUG_PAT Dump details which PDC PAT provides about ranges/devices.
 */
 #undef DEBUG_PAT

 int pdc_type __read_mostly = PDC_TYPE_ILLEGAL;

 void __init setup_pdc(void)
 {
 	long status;
 	unsigned int bus_id;
 	struct pdc_system_map_mod_info module_result;
 	struct pdc_module_path module_path;
 	struct pdc_model model;
 #ifdef CONFIG_64BIT
 	struct pdc_pat_cell_num cell_info;
 #endif

 	/* Determine the pdc "type" used on this machine */

 	printk(KERN_INFO "Determining PDC firmware type: ");

 	status = pdc_system_map_find_mods(&module_result, &module_path, 0);
 	if (status == PDC_OK) {
 		pdc_type = PDC_TYPE_SYSTEM_MAP;
 		printk("System Map.\n");
 		return;
 	}

 	/*
 	 * If the machine doesn't support PDC_SYSTEM_MAP then either it
 	 * is a pdc pat box, or it is an older box. All 64 bit capable
 	 * machines are either pdc pat boxes or they support PDC_SYSTEM_MAP.
 	 */

 	/*
 	 * TODO: We should test for 64 bit capability and give a
 	 * clearer message.
 	 */

 #ifdef CONFIG_64BIT
 	status = pdc_pat_cell_get_number(&cell_info);
 	if (status == PDC_OK) {
 		pdc_type = PDC_TYPE_PAT;
 		printk("64 bit PAT.\n");
 		return;
 	}
 #endif

 	/* Check the CPU's bus ID.  There's probably a better test.  */

 	status = pdc_model_info(&model);

 	bus_id = (model.hversion >> (4 + 7)) & 0x1f;

 	switch (bus_id) {
 	case 0x4:		/* 720, 730, 750, 735, 755 */
 	case 0x6:		/* 705, 710 */
 	case 0x7:		/* 715, 725 */
 	case 0x8:		/* 745, 747, 742 */
 	case 0xA:		/* 712 and similiar */
 	case 0xC:		/* 715/64, at least */

 		pdc_type = PDC_TYPE_SNAKE;
 		printk("Snake.\n");
 		return;

 	default:		/* Everything else */

 		printk("Unsupported.\n");
 		panic("If this is a 64-bit machine, please try a 64-bit kernel.\n");
 	}
 }

 #define PDC_PAGE_ADJ_SHIFT (PAGE_SHIFT - 12) /* pdc pages are always 4k */

 static void __init
 set_pmem_entry(physmem_range_t *pmem_ptr, unsigned long start,
 	       unsigned long pages4k)
 {
 	/* Rather than aligning and potentially throwing away
 	 * memory, we'll assume that any ranges are already
 	 * nicely aligned with any reasonable page size, and
 	 * panic if they are not (it's more likely that the
 	 * pdc info is bad in this case).
 	 */

 	if (unlikely( ((start & (PAGE_SIZE - 1)) != 0)
 	    || ((pages4k & ((1UL << PDC_PAGE_ADJ_SHIFT) - 1)) != 0) )) {

 		panic("Memory range doesn't align with page size!\n");
 	}

 	pmem_ptr->start_pfn = (start >> PAGE_SHIFT);
 	pmem_ptr->pages = (pages4k >> PDC_PAGE_ADJ_SHIFT);
 }

 static void __init pagezero_memconfig(void)
 {
 	unsigned long npages;

 	/* Use the 32 bit information from page zero to create a single
 	 * entry in the pmem_ranges[] table.
 	 *
 	 * We currently don't support machines with contiguous memory
 	 * >= 4 Gb, who report that memory using 64 bit only fields
 	 * on page zero. It's not worth doing until it can be tested,
 	 * and it is not clear we can support those machines for other
 	 * reasons.
 	 *
 	 * If that support is done in the future, this is where it
 	 * should be done.
 	 */

 	npages = (PAGE_ALIGN(PAGE0->imm_max_mem) >> PAGE_SHIFT);
 	set_pmem_entry(pmem_ranges,0UL,npages);
 	npmem_ranges = 1;
 }

 #ifdef CONFIG_64BIT

 /* All of the PDC PAT specific code is 64-bit only */

 /*
 **  The module object is filled via PDC_PAT_CELL[Return Cell Module].
 **  If a module is found, register module will get the IODC bytes via
 **  pdc_iodc_read() using the PA view of conf_base_addr for the hpa parameter.
 **
 **  The IO view can be used by PDC_PAT_CELL[Return Cell Module]
 **  only for SBAs and LBAs.  This view will cause an invalid
 **  argument error for all other cell module types.
 **
 */

 static int __init
 pat_query_module(ulong pcell_loc, ulong mod_index)
 {
 	pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
 	unsigned long bytecnt;
 	unsigned long temp;	/* 64-bit scratch value */
 	long status;		/* PDC return value status */
 	struct parisc_device *dev;

 	/* return cell module (PA or Processor view) */
 	status = pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
 				     PA_VIEW, &pa_pdc_cell);

 	if (status != PDC_OK) {
 		/* no more cell modules or error */
 		return status;
 	}

 	temp = pa_pdc_cell.cba;
 	dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path);
 	if (!dev) {
 		return PDC_OK;
 	}

 	/* alloc_pa_dev sets dev->hpa */

 	/*
 	** save parameters in the parisc_device
 	** (The idea being the device driver will call pdc_pat_cell_module()
 	** and store the results in its own data structure.)
 	*/
 	dev->pcell_loc = pcell_loc;
 	dev->mod_index = mod_index;

 	/* save generic info returned from the call */
 	/* REVISIT: who is the consumer of this? not sure yet... */
 	dev->mod_info = pa_pdc_cell.mod_info;	/* pass to PAT_GET_ENTITY() */
 	dev->pmod_loc = pa_pdc_cell.mod_location;

 	register_parisc_device(dev);	/* advertise device */

 #ifdef DEBUG_PAT
 	pdc_pat_cell_mod_maddr_block_t io_pdc_cell;
 	/* dump what we see so far... */
 	switch (PAT_GET_ENTITY(dev->mod_info)) {
 		unsigned long i;

 	case PAT_ENTITY_PROC:
 		printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n",
 			pa_pdc_cell.mod[0]);
 		break;

 	case PAT_ENTITY_MEM:
 		printk(KERN_DEBUG
 			"PAT_ENTITY_MEM: amount 0x%lx min_gni_base 0x%lx min_gni_len 0x%lx\n",
 			pa_pdc_cell.mod[0], pa_pdc_cell.mod[1],
 			pa_pdc_cell.mod[2]);
 		break;
 	case PAT_ENTITY_CA:
 		printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc);
 		break;

 	case PAT_ENTITY_PBC:
 		printk(KERN_DEBUG "PAT_ENTITY_PBC: ");
 		goto print_ranges;

 	case PAT_ENTITY_SBA:
 		printk(KERN_DEBUG "PAT_ENTITY_SBA: ");
 		goto print_ranges;

 	case PAT_ENTITY_LBA:
 		printk(KERN_DEBUG "PAT_ENTITY_LBA: ");

  print_ranges:
 		pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
 				    IO_VIEW, &io_pdc_cell);
 		printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell.mod[1]);
 		for (i = 0; i < pa_pdc_cell.mod[1]; i++) {
 			printk(KERN_DEBUG
 				"  PA_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n",
 				i, pa_pdc_cell.mod[2 + i * 3],	/* type */
 				pa_pdc_cell.mod[3 + i * 3],	/* start */
 				pa_pdc_cell.mod[4 + i * 3]);	/* finish (ie end) */
 			printk(KERN_DEBUG
 				"  IO_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n",
 				i, io_pdc_cell.mod[2 + i * 3],	/* type */
 				io_pdc_cell.mod[3 + i * 3],	/* start */
 				io_pdc_cell.mod[4 + i * 3]);	/* finish (ie end) */
 		}
 		printk(KERN_DEBUG "\n");
 		break;
 	}
 #endif /* DEBUG_PAT */
 	return PDC_OK;
 }


 /* pat pdc can return information about a variety of different
  * types of memory (e.g. firmware,i/o, etc) but we only care about
  * the usable physical ram right now. Since the firmware specific
  * information is allocated on the stack, we'll be generous, in
  * case there is a lot of other information we don't care about.
  */

 #define PAT_MAX_RANGES (4 * MAX_PHYSMEM_RANGES)

 static void __init pat_memconfig(void)
 {
 	unsigned long actual_len;
 	struct pdc_pat_pd_addr_map_entry mem_table[PAT_MAX_RANGES+1];
 	struct pdc_pat_pd_addr_map_entry *mtbl_ptr;
 	physmem_range_t *pmem_ptr;
 	long status;
 	int entries;
 	unsigned long length;
 	int i;

 	length = (PAT_MAX_RANGES + 1) * sizeof(struct pdc_pat_pd_addr_map_entry);

 	status = pdc_pat_pd_get_addr_map(&actual_len, mem_table, length, 0L);

 	if ((status != PDC_OK)
 	    || ((actual_len % sizeof(struct pdc_pat_pd_addr_map_entry)) != 0)) {

 		/* The above pdc call shouldn't fail, but, just in
 		 * case, just use the PAGE0 info.
 		 */

 		printk("\n\n\n");
 		printk(KERN_WARNING "WARNING! Could not get full memory configuration. "
 			"All memory may not be used!\n\n\n");
 		pagezero_memconfig();
 		return;
 	}

 	entries = actual_len / sizeof(struct pdc_pat_pd_addr_map_entry);

 	if (entries > PAT_MAX_RANGES) {
 		printk(KERN_WARNING "This Machine has more memory ranges than we support!\n");
 		printk(KERN_WARNING "Some memory may not be used!\n");
 	}

 	/* Copy information into the firmware independent pmem_ranges
 	 * array, skipping types we don't care about. Notice we said
 	 * "may" above. We'll use all the entries that were returned.
 	 */

 	npmem_ranges = 0;
 	mtbl_ptr = mem_table;
 	pmem_ptr = pmem_ranges; /* Global firmware independent table */
 	for (i = 0; i < entries; i++,mtbl_ptr++) {
 		if (   (mtbl_ptr->entry_type != PAT_MEMORY_DESCRIPTOR)
 		    || (mtbl_ptr->memory_type != PAT_MEMTYPE_MEMORY)
 		    || (mtbl_ptr->pages == 0)
 		    || (   (mtbl_ptr->memory_usage != PAT_MEMUSE_GENERAL)
 			&& (mtbl_ptr->memory_usage != PAT_MEMUSE_GI)
 			&& (mtbl_ptr->memory_usage != PAT_MEMUSE_GNI) ) ) {

 			continue;
 		}

 		if (npmem_ranges == MAX_PHYSMEM_RANGES) {
 			printk(KERN_WARNING "This Machine has more memory ranges than we support!\n");
 			printk(KERN_WARNING "Some memory will not be used!\n");
 			break;
 		}

 		set_pmem_entry(pmem_ptr++,mtbl_ptr->paddr,mtbl_ptr->pages);
 		npmem_ranges++;
 	}
 }

 static int __init pat_inventory(void)
 {
 	int status;
 	ulong mod_index = 0;
 	struct pdc_pat_cell_num cell_info;

 	/*
 	** Note:  Prelude (and it's successors: Lclass, A400/500) only
 	**        implement PDC_PAT_CELL sub-options 0 and 2.
 	*/
 	status = pdc_pat_cell_get_number(&cell_info);
 	if (status != PDC_OK) {
 		return 0;
 	}

 #ifdef DEBUG_PAT
 	printk(KERN_DEBUG "CELL_GET_NUMBER: 0x%lx 0x%lx\n", cell_info.cell_num,
 	       cell_info.cell_loc);
 #endif

 	while (PDC_OK == pat_query_module(cell_info.cell_loc, mod_index)) {
 		mod_index++;
 	}

 	return mod_index;
 }

 /* We only look for extended memory ranges on a 64 bit capable box */
 static void __init sprockets_memconfig(void)
 {
 	struct pdc_memory_table_raddr r_addr;
 	struct pdc_memory_table mem_table[MAX_PHYSMEM_RANGES];
 	struct pdc_memory_table *mtbl_ptr;
 	physmem_range_t *pmem_ptr;
 	long status;
 	int entries;
 	int i;

 	status = pdc_mem_mem_table(&r_addr,mem_table,
 				(unsigned long)MAX_PHYSMEM_RANGES);

 	if (status != PDC_OK) {

 		/* The above pdc call only works on boxes with sprockets
 		 * firmware (newer B,C,J class). Other non PAT PDC machines
 		 * do support more than 3.75 Gb of memory, but we don't
 		 * support them yet.
 		 */

 		pagezero_memconfig();
 		return;
 	}

 	if (r_addr.entries_total > MAX_PHYSMEM_RANGES) {
 		printk(KERN_WARNING "This Machine has more memory ranges than we support!\n");
 		printk(KERN_WARNING "Some memory will not be used!\n");
 	}

 	entries = (int)r_addr.entries_returned;

 	npmem_ranges = 0;
 	mtbl_ptr = mem_table;
 	pmem_ptr = pmem_ranges; /* Global firmware independent table */
 	for (i = 0; i < entries; i++,mtbl_ptr++) {
 		set_pmem_entry(pmem_ptr++,mtbl_ptr->paddr,mtbl_ptr->pages);
 		npmem_ranges++;
 	}
 }

 #else   /* !CONFIG_64BIT */

 #define pat_inventory() do { } while (0)
 #define pat_memconfig() do { } while (0)
 #define sprockets_memconfig() pagezero_memconfig()

 #endif	/* !CONFIG_64BIT */


 #ifndef CONFIG_PA20

 /* Code to support Snake machines (7[2350], 7[235]5, 715/Scorpio) */

 static struct parisc_device * __init
 legacy_create_device(struct pdc_memory_map *r_addr,
 		struct pdc_module_path *module_path)
 {
 	struct parisc_device *dev;
 	int status = pdc_mem_map_hpa(r_addr, module_path);
 	if (status != PDC_OK)
 		return NULL;

 	dev = alloc_pa_dev(r_addr->hpa, &module_path->path);
 	if (dev == NULL)
 		return NULL;

 	register_parisc_device(dev);
 	return dev;
 }

 /**
  * snake_inventory
  *
  * Before PDC_SYSTEM_MAP was invented, the PDC_MEM_MAP call was used.
  * To use it, we initialise the mod_path.bc to 0xff and try all values of
  * mod to get the HPA for the top-level devices.  Bus adapters may have
  * sub-devices which are discovered by setting bc[5] to 0 and bc[4] to the
  * module, then trying all possible functions.
  */
 static void __init snake_inventory(void)
 {
 	int mod;
 	for (mod = 0; mod < 16; mod++) {
 		struct parisc_device *dev;
 		struct pdc_module_path module_path;
 		struct pdc_memory_map r_addr;
 		unsigned int func;

 		memset(module_path.path.bc, 0xff, 6);
 		module_path.path.mod = mod;
 		dev = legacy_create_device(&r_addr, &module_path);
 		if ((!dev) || (dev->id.hw_type != HPHW_BA))
 			continue;

 		memset(module_path.path.bc, 0xff, 4);
 		module_path.path.bc[4] = mod;

 		for (func = 0; func < 16; func++) {
 			module_path.path.bc[5] = 0;
 			module_path.path.mod = func;
 			legacy_create_device(&r_addr, &module_path);
 		}
 	}
 }

 #else /* CONFIG_PA20 */
 #define snake_inventory() do { } while (0)
 #endif  /* CONFIG_PA20 */

 /* Common 32/64 bit based code goes here */

 /**
  * add_system_map_addresses - Add additional addresses to the parisc device.
  * @dev: The parisc device.
  * @num_addrs: Then number of addresses to add;
  * @module_instance: The system_map module instance.
  *
  * This function adds any additional addresses reported by the system_map
  * firmware to the parisc device.
  */
 static void __init
 add_system_map_addresses(struct parisc_device *dev, int num_addrs,
 			 int module_instance)
 {
 	int i;
 	long status;
 	struct pdc_system_map_addr_info addr_result;

 	dev->addr = kmalloc(num_addrs * sizeof(unsigned long), GFP_KERNEL);
 	if(!dev->addr) {
 		printk(KERN_ERR "%s %s(): memory allocation failure\n",
 		       __FILE__, __func__);
 		return;
 	}

 	for(i = 1; i <= num_addrs; ++i) {
 		status = pdc_system_map_find_addrs(&addr_result,
 						   module_instance, i);
 		if(PDC_OK == status) {
 			dev->addr[dev->num_addrs] = (unsigned long)addr_result.mod_addr;
 			dev->num_addrs++;
 		} else {
 			printk(KERN_WARNING
 			       "Bad PDC_FIND_ADDRESS status return (%ld) for index %d\n",
 			       status, i);
 		}
 	}
 }

 /**
  * system_map_inventory - Retrieve firmware devices via SYSTEM_MAP.
  *
  * This function attempts to retrieve and register all the devices firmware
  * knows about via the SYSTEM_MAP PDC call.
  */
 static void __init system_map_inventory(void)
 {
 	int i;
 	long status = PDC_OK;

 	for (i = 0; i < 256; i++) {
 		struct parisc_device *dev;
 		struct pdc_system_map_mod_info module_result;
 		struct pdc_module_path module_path;

 		status = pdc_system_map_find_mods(&module_result,
 				&module_path, i);
 		if ((status == PDC_BAD_PROC) || (status == PDC_NE_MOD))
 			break;
 		if (status != PDC_OK)
 			continue;

 		dev = alloc_pa_dev(module_result.mod_addr, &module_path.path);
 		if (!dev)
 			continue;

 		register_parisc_device(dev);

 		/* if available, get the additional addresses for a module */
 		if (!module_result.add_addrs)
 			continue;

 		add_system_map_addresses(dev, module_result.add_addrs, i);
 	}

 	walk_central_bus();
 	return;
 }

 void __init do_memory_inventory(void)
 {
 	switch (pdc_type) {

 	case PDC_TYPE_PAT:
 		pat_memconfig();
 		break;

 	case PDC_TYPE_SYSTEM_MAP:
 		sprockets_memconfig();
 		break;

 	case PDC_TYPE_SNAKE:
 		pagezero_memconfig();
 		return;

 	default:
 		panic("Unknown PDC type!\n");
 	}

 	if (npmem_ranges == 0 || pmem_ranges[0].start_pfn != 0) {
 		printk(KERN_WARNING "Bad memory configuration returned!\n");
 		printk(KERN_WARNING "Some memory may not be used!\n");
 		pagezero_memconfig();
 	}
 }

 void __init do_device_inventory(void)
 {
 	printk(KERN_INFO "Searching for devices...\n");

 	init_parisc_bus();

 	switch (pdc_type) {

 	case PDC_TYPE_PAT:
 		pat_inventory();
 		break;

 	case PDC_TYPE_SYSTEM_MAP:
 		system_map_inventory();
 		break;

 	case PDC_TYPE_SNAKE:
 		snake_inventory();
 		break;

 	default:
 		panic("Unknown PDC type!\n");
 	}
 	printk(KERN_INFO "Found devices:\n");
 	print_parisc_devices();
 }
	/*
	* inventory.c
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version
	* 2 of the License, or (at your option) any later version.
	*
	* Copyright (c) 1999 The Puffin Group (David Kennedy and Alex deVries)
	* Copyright (c) 2001 Matthew Wilcox for Hewlett-Packard
	*
	* These are the routines to discover what hardware exists in this box.
	* This task is complicated by there being 3 different ways of
	* performing an inventory, depending largely on the age of the box.
	* The recommended way to do this is to check to see whether the machine
	* is a `Snake' first, then try System Map, then try PAT. We try System
	* Map before checking for a Snake -- this probably doesn't cause any
	* problems, but...
	*/

	#include <linux/types.h>
	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/slab.h>
	#include <linux/mm.h>
	#include <asm/hardware.h>
	#include <asm/io.h>
	#include <asm/mmzone.h>
	#include <asm/pdc.h>
	#include <asm/pdcpat.h>
	#include <asm/processor.h>
	#include <asm/page.h>
	#include <asm/parisc-device.h>

	/*
	** Debug options
	** DEBUG_PAT Dump details which PDC PAT provides about ranges/devices.
	*/
	#undef DEBUG_PAT

	int pdc_type __read_mostly = PDC_TYPE_ILLEGAL;

	void __init setup_pdc(void)
	{
	long status;
	unsigned int bus_id;
	struct pdc_system_map_mod_info module_result;
	struct pdc_module_path module_path;
	struct pdc_model model;
	#ifdef CONFIG_64BIT
	struct pdc_pat_cell_num cell_info;
	#endif

	/* Determine the pdc "type" used on this machine */

	printk(KERN_INFO "Determining PDC firmware type: ");

	status = pdc_system_map_find_mods(&module_result, &module_path, 0);
	if (status == PDC_OK) {
	pdc_type = PDC_TYPE_SYSTEM_MAP;
	printk("System Map.\n");
	return;
	}

	/*
	* If the machine doesn't support PDC_SYSTEM_MAP then either it
	* is a pdc pat box, or it is an older box. All 64 bit capable
	* machines are either pdc pat boxes or they support PDC_SYSTEM_MAP.
	*/

	/*
	* TODO: We should test for 64 bit capability and give a
	* clearer message.
	*/

	#ifdef CONFIG_64BIT
	status = pdc_pat_cell_get_number(&cell_info);
	if (status == PDC_OK) {
	pdc_type = PDC_TYPE_PAT;
	printk("64 bit PAT.\n");
	return;
	}
	#endif

	/* Check the CPU's bus ID. There's probably a better test. */

	status = pdc_model_info(&model);

	bus_id = (model.hversion >> (4 + 7)) & 0x1f;

	switch (bus_id) {
	case 0x4: /* 720, 730, 750, 735, 755 */
	case 0x6: /* 705, 710 */
	case 0x7: /* 715, 725 */
	case 0x8: /* 745, 747, 742 */
	case 0xA: /* 712 and similiar */
	case 0xC: /* 715/64, at least */

	pdc_type = PDC_TYPE_SNAKE;
	printk("Snake.\n");
	return;

	default: /* Everything else */

	printk("Unsupported.\n");
	panic("If this is a 64-bit machine, please try a 64-bit kernel.\n");
	}
	}

	#define PDC_PAGE_ADJ_SHIFT (PAGE_SHIFT - 12) /* pdc pages are always 4k */

	static void __init
	set_pmem_entry(physmem_range_t *pmem_ptr, unsigned long start,
	unsigned long pages4k)
	{
	/* Rather than aligning and potentially throwing away
	* memory, we'll assume that any ranges are already
	* nicely aligned with any reasonable page size, and
	* panic if they are not (it's more likely that the
	* pdc info is bad in this case).
	*/

	if (unlikely( ((start & (PAGE_SIZE - 1)) != 0)
	\|\| ((pages4k & ((1UL << PDC_PAGE_ADJ_SHIFT) - 1)) != 0) )) {

	panic("Memory range doesn't align with page size!\n");
	}

	pmem_ptr->start_pfn = (start >> PAGE_SHIFT);
	pmem_ptr->pages = (pages4k >> PDC_PAGE_ADJ_SHIFT);
	}

	static void __init pagezero_memconfig(void)
	{
	unsigned long npages;

	/* Use the 32 bit information from page zero to create a single
	* entry in the pmem_ranges[] table.
	*
	* We currently don't support machines with contiguous memory
	* >= 4 Gb, who report that memory using 64 bit only fields
	* on page zero. It's not worth doing until it can be tested,
	* and it is not clear we can support those machines for other
	* reasons.
	*
	* If that support is done in the future, this is where it
	* should be done.
	*/

	npages = (PAGE_ALIGN(PAGE0->imm_max_mem) >> PAGE_SHIFT);
	set_pmem_entry(pmem_ranges,0UL,npages);
	npmem_ranges = 1;
	}

	#ifdef CONFIG_64BIT

	/* All of the PDC PAT specific code is 64-bit only */

	/*
	** The module object is filled via PDC_PAT_CELL[Return Cell Module].
	** If a module is found, register module will get the IODC bytes via
	** pdc_iodc_read() using the PA view of conf_base_addr for the hpa parameter.
	**
	** The IO view can be used by PDC_PAT_CELL[Return Cell Module]
	** only for SBAs and LBAs. This view will cause an invalid
	** argument error for all other cell module types.
	**
	*/

	static int __init
	pat_query_module(ulong pcell_loc, ulong mod_index)
	{
	pdc_pat_cell_mod_maddr_block_t pa_pdc_cell;
	unsigned long bytecnt;
	unsigned long temp; /* 64-bit scratch value */
	long status; /* PDC return value status */
	struct parisc_device *dev;

	/* return cell module (PA or Processor view) */
	status = pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
	PA_VIEW, &pa_pdc_cell);

	if (status != PDC_OK) {
	/* no more cell modules or error */
	return status;
	}

	temp = pa_pdc_cell.cba;
	dev = alloc_pa_dev(PAT_GET_CBA(temp), &pa_pdc_cell.mod_path);
	if (!dev) {
	return PDC_OK;
	}

	/* alloc_pa_dev sets dev->hpa */

	/*
	** save parameters in the parisc_device
	** (The idea being the device driver will call pdc_pat_cell_module()
	** and store the results in its own data structure.)
	*/
	dev->pcell_loc = pcell_loc;
	dev->mod_index = mod_index;

	/* save generic info returned from the call */
	/* REVISIT: who is the consumer of this? not sure yet... */
	dev->mod_info = pa_pdc_cell.mod_info; /* pass to PAT_GET_ENTITY() */
	dev->pmod_loc = pa_pdc_cell.mod_location;

	register_parisc_device(dev); /* advertise device */

	#ifdef DEBUG_PAT
	pdc_pat_cell_mod_maddr_block_t io_pdc_cell;
	/* dump what we see so far... */
	switch (PAT_GET_ENTITY(dev->mod_info)) {
	unsigned long i;

	case PAT_ENTITY_PROC:
	printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n",
	pa_pdc_cell.mod[0]);
	break;

	case PAT_ENTITY_MEM:
	printk(KERN_DEBUG
	"PAT_ENTITY_MEM: amount 0x%lx min_gni_base 0x%lx min_gni_len 0x%lx\n",
	pa_pdc_cell.mod[0], pa_pdc_cell.mod[1],
	pa_pdc_cell.mod[2]);
	break;
	case PAT_ENTITY_CA:
	printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc);
	break;

	case PAT_ENTITY_PBC:
	printk(KERN_DEBUG "PAT_ENTITY_PBC: ");
	goto print_ranges;

	case PAT_ENTITY_SBA:
	printk(KERN_DEBUG "PAT_ENTITY_SBA: ");
	goto print_ranges;

	case PAT_ENTITY_LBA:
	printk(KERN_DEBUG "PAT_ENTITY_LBA: ");

	print_ranges:
	pdc_pat_cell_module(&bytecnt, pcell_loc, mod_index,
	IO_VIEW, &io_pdc_cell);
	printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell.mod[1]);
	for (i = 0; i < pa_pdc_cell.mod[1]; i++) {
	printk(KERN_DEBUG
	" PA_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n",
	i, pa_pdc_cell.mod[2 + i * 3], /* type */
	pa_pdc_cell.mod[3 + i * 3], /* start */
	pa_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */
	printk(KERN_DEBUG
	" IO_VIEW %ld: 0x%016lx 0x%016lx 0x%016lx\n",
	i, io_pdc_cell.mod[2 + i * 3], /* type */
	io_pdc_cell.mod[3 + i * 3], /* start */
	io_pdc_cell.mod[4 + i * 3]); /* finish (ie end) */
	}
	printk(KERN_DEBUG "\n");
	break;
	}
	#endif /* DEBUG_PAT */
	return PDC_OK;
	}


	/* pat pdc can return information about a variety of different
	* types of memory (e.g. firmware,i/o, etc) but we only care about
	* the usable physical ram right now. Since the firmware specific
	* information is allocated on the stack, we'll be generous, in
	* case there is a lot of other information we don't care about.
	*/

	#define PAT_MAX_RANGES (4 * MAX_PHYSMEM_RANGES)

	static void __init pat_memconfig(void)
	{
	unsigned long actual_len;
	struct pdc_pat_pd_addr_map_entry mem_table[PAT_MAX_RANGES+1];
	struct pdc_pat_pd_addr_map_entry *mtbl_ptr;
	physmem_range_t *pmem_ptr;
	long status;
	int entries;
	unsigned long length;
	int i;

	length = (PAT_MAX_RANGES + 1) * sizeof(struct pdc_pat_pd_addr_map_entry);

	status = pdc_pat_pd_get_addr_map(&actual_len, mem_table, length, 0L);

	if ((status != PDC_OK)
	\|\| ((actual_len % sizeof(struct pdc_pat_pd_addr_map_entry)) != 0)) {

	/* The above pdc call shouldn't fail, but, just in
	* case, just use the PAGE0 info.
	*/

	printk("\n\n\n");
	printk(KERN_WARNING "WARNING! Could not get full memory configuration. "
	"All memory may not be used!\n\n\n");
	pagezero_memconfig();
	return;
	}

	entries = actual_len / sizeof(struct pdc_pat_pd_addr_map_entry);

	if (entries > PAT_MAX_RANGES) {
	printk(KERN_WARNING "This Machine has more memory ranges than we support!\n");
	printk(KERN_WARNING "Some memory may not be used!\n");
	}

	/* Copy information into the firmware independent pmem_ranges
	* array, skipping types we don't care about. Notice we said
	* "may" above. We'll use all the entries that were returned.
	*/

	npmem_ranges = 0;
	mtbl_ptr = mem_table;
	pmem_ptr = pmem_ranges; /* Global firmware independent table */
	for (i = 0; i < entries; i++,mtbl_ptr++) {
	if ( (mtbl_ptr->entry_type != PAT_MEMORY_DESCRIPTOR)
	\|\| (mtbl_ptr->memory_type != PAT_MEMTYPE_MEMORY)
	\|\| (mtbl_ptr->pages == 0)
	\|\| ( (mtbl_ptr->memory_usage != PAT_MEMUSE_GENERAL)
	&& (mtbl_ptr->memory_usage != PAT_MEMUSE_GI)
	&& (mtbl_ptr->memory_usage != PAT_MEMUSE_GNI) ) ) {

	continue;
	}

	if (npmem_ranges == MAX_PHYSMEM_RANGES) {
	printk(KERN_WARNING "This Machine has more memory ranges than we support!\n");
	printk(KERN_WARNING "Some memory will not be used!\n");
	break;
	}

	set_pmem_entry(pmem_ptr++,mtbl_ptr->paddr,mtbl_ptr->pages);
	npmem_ranges++;
	}
	}

	static int __init pat_inventory(void)
	{
	int status;
	ulong mod_index = 0;
	struct pdc_pat_cell_num cell_info;

	/*
	** Note: Prelude (and it's successors: Lclass, A400/500) only
	** implement PDC_PAT_CELL sub-options 0 and 2.
	*/
	status = pdc_pat_cell_get_number(&cell_info);
	if (status != PDC_OK) {
	return 0;
	}

	#ifdef DEBUG_PAT
	printk(KERN_DEBUG "CELL_GET_NUMBER: 0x%lx 0x%lx\n", cell_info.cell_num,
	cell_info.cell_loc);
	#endif

	while (PDC_OK == pat_query_module(cell_info.cell_loc, mod_index)) {
	mod_index++;
	}

	return mod_index;
	}

	/* We only look for extended memory ranges on a 64 bit capable box */
	static void __init sprockets_memconfig(void)
	{
	struct pdc_memory_table_raddr r_addr;
	struct pdc_memory_table mem_table[MAX_PHYSMEM_RANGES];
	struct pdc_memory_table *mtbl_ptr;
	physmem_range_t *pmem_ptr;
	long status;
	int entries;
	int i;

	status = pdc_mem_mem_table(&r_addr,mem_table,
	(unsigned long)MAX_PHYSMEM_RANGES);

	if (status != PDC_OK) {

	/* The above pdc call only works on boxes with sprockets
	* firmware (newer B,C,J class). Other non PAT PDC machines
	* do support more than 3.75 Gb of memory, but we don't
	* support them yet.
	*/

	pagezero_memconfig();
	return;
	}

	if (r_addr.entries_total > MAX_PHYSMEM_RANGES) {
	printk(KERN_WARNING "This Machine has more memory ranges than we support!\n");
	printk(KERN_WARNING "Some memory will not be used!\n");
	}

	entries = (int)r_addr.entries_returned;

	npmem_ranges = 0;
	mtbl_ptr = mem_table;
	pmem_ptr = pmem_ranges; /* Global firmware independent table */
	for (i = 0; i < entries; i++,mtbl_ptr++) {
	set_pmem_entry(pmem_ptr++,mtbl_ptr->paddr,mtbl_ptr->pages);
	npmem_ranges++;
	}
	}

	#else /* !CONFIG_64BIT */

	#define pat_inventory() do { } while (0)
	#define pat_memconfig() do { } while (0)
	#define sprockets_memconfig() pagezero_memconfig()

	#endif /* !CONFIG_64BIT */


	#ifndef CONFIG_PA20

	/* Code to support Snake machines (7[2350], 7[235]5, 715/Scorpio) */

	static struct parisc_device * __init
	legacy_create_device(struct pdc_memory_map *r_addr,
	struct pdc_module_path *module_path)
	{
	struct parisc_device *dev;
	int status = pdc_mem_map_hpa(r_addr, module_path);
	if (status != PDC_OK)
	return NULL;

	dev = alloc_pa_dev(r_addr->hpa, &module_path->path);
	if (dev == NULL)
	return NULL;

	register_parisc_device(dev);
	return dev;
	}

	/**
	* snake_inventory
	*
	* Before PDC_SYSTEM_MAP was invented, the PDC_MEM_MAP call was used.
	* To use it, we initialise the mod_path.bc to 0xff and try all values of
	* mod to get the HPA for the top-level devices. Bus adapters may have
	* sub-devices which are discovered by setting bc[5] to 0 and bc[4] to the
	* module, then trying all possible functions.
	*/
	static void __init snake_inventory(void)
	{
	int mod;
	for (mod = 0; mod < 16; mod++) {
	struct parisc_device *dev;
	struct pdc_module_path module_path;
	struct pdc_memory_map r_addr;
	unsigned int func;

	memset(module_path.path.bc, 0xff, 6);
	module_path.path.mod = mod;
	dev = legacy_create_device(&r_addr, &module_path);
	if ((!dev) \|\| (dev->id.hw_type != HPHW_BA))
	continue;

	memset(module_path.path.bc, 0xff, 4);
	module_path.path.bc[4] = mod;

	for (func = 0; func < 16; func++) {
	module_path.path.bc[5] = 0;
	module_path.path.mod = func;
	legacy_create_device(&r_addr, &module_path);
	}
	}
	}

	#else /* CONFIG_PA20 */
	#define snake_inventory() do { } while (0)
	#endif /* CONFIG_PA20 */

	/* Common 32/64 bit based code goes here */

	/**
	* add_system_map_addresses - Add additional addresses to the parisc device.
	* @dev: The parisc device.
	* @num_addrs: Then number of addresses to add;
	* @module_instance: The system_map module instance.
	*
	* This function adds any additional addresses reported by the system_map
	* firmware to the parisc device.
	*/
	static void __init
	add_system_map_addresses(struct parisc_device *dev, int num_addrs,
	int module_instance)
	{
	int i;
	long status;
	struct pdc_system_map_addr_info addr_result;

	dev->addr = kmalloc(num_addrs * sizeof(unsigned long), GFP_KERNEL);
	if(!dev->addr) {
	printk(KERN_ERR "%s %s(): memory allocation failure\n",
	__FILE__, __func__);
	return;
	}

	for(i = 1; i <= num_addrs; ++i) {
	status = pdc_system_map_find_addrs(&addr_result,
	module_instance, i);
	if(PDC_OK == status) {
	dev->addr[dev->num_addrs] = (unsigned long)addr_result.mod_addr;
	dev->num_addrs++;
	} else {
	printk(KERN_WARNING
	"Bad PDC_FIND_ADDRESS status return (%ld) for index %d\n",
	status, i);
	}
	}
	}

	/**
	* system_map_inventory - Retrieve firmware devices via SYSTEM_MAP.
	*
	* This function attempts to retrieve and register all the devices firmware
	* knows about via the SYSTEM_MAP PDC call.
	*/
	static void __init system_map_inventory(void)
	{
	int i;
	long status = PDC_OK;

	for (i = 0; i < 256; i++) {
	struct parisc_device *dev;
	struct pdc_system_map_mod_info module_result;
	struct pdc_module_path module_path;

	status = pdc_system_map_find_mods(&module_result,
	&module_path, i);
	if ((status == PDC_BAD_PROC) \|\| (status == PDC_NE_MOD))
	break;
	if (status != PDC_OK)
	continue;

	dev = alloc_pa_dev(module_result.mod_addr, &module_path.path);
	if (!dev)
	continue;

	register_parisc_device(dev);

	/* if available, get the additional addresses for a module */
	if (!module_result.add_addrs)
	continue;

	add_system_map_addresses(dev, module_result.add_addrs, i);
	}

	walk_central_bus();
	return;
	}

	void __init do_memory_inventory(void)
	{
	switch (pdc_type) {

	case PDC_TYPE_PAT:
	pat_memconfig();
	break;

	case PDC_TYPE_SYSTEM_MAP:
	sprockets_memconfig();
	break;

	case PDC_TYPE_SNAKE:
	pagezero_memconfig();
	return;

	default:
	panic("Unknown PDC type!\n");
	}

	if (npmem_ranges == 0 \|\| pmem_ranges[0].start_pfn != 0) {
	printk(KERN_WARNING "Bad memory configuration returned!\n");
	printk(KERN_WARNING "Some memory may not be used!\n");
	pagezero_memconfig();
	}
	}

	void __init do_device_inventory(void)
	{
	printk(KERN_INFO "Searching for devices...\n");

	init_parisc_bus();

	switch (pdc_type) {

	case PDC_TYPE_PAT:
	pat_inventory();
	break;

	case PDC_TYPE_SYSTEM_MAP:
	system_map_inventory();
	break;

	case PDC_TYPE_SNAKE:
	snake_inventory();
	break;

	default:
	panic("Unknown PDC type!\n");
	}
	printk(KERN_INFO "Found devices:\n");
	print_parisc_devices();
	}