usb: otg: isp1301_omap: Start using struct usb_otg
Use struct usb_otg members with OTG specific functions instead
of usb_phy members.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 1bc2794..70cf5d7 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -52,7 +52,7 @@
MODULE_LICENSE("GPL");
struct isp1301 {
- struct usb_phy otg;
+ struct usb_phy phy;
struct i2c_client *client;
void (*i2c_release)(struct device *dev);
@@ -236,7 +236,7 @@
static inline const char *state_name(struct isp1301 *isp)
{
- return otg_state_string(isp->otg.state);
+ return otg_state_string(isp->phy.state);
}
/*-------------------------------------------------------------------------*/
@@ -251,7 +251,7 @@
static void power_down(struct isp1301 *isp)
{
- isp->otg.state = OTG_STATE_UNDEFINED;
+ isp->phy.state = OTG_STATE_UNDEFINED;
// isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
@@ -280,13 +280,13 @@
#else
struct device *dev;
- if (!isp->otg.host)
+ if (!isp->phy.otg->host)
return -ENODEV;
/* Currently ASSUMES only the OTG port matters;
* other ports could be active...
*/
- dev = isp->otg.host->controller;
+ dev = isp->phy.otg->host->controller;
return dev->driver->suspend(dev, 3, 0);
#endif
}
@@ -298,20 +298,20 @@
#else
struct device *dev;
- if (!isp->otg.host)
+ if (!isp->phy.otg->host)
return -ENODEV;
- dev = isp->otg.host->controller;
+ dev = isp->phy.otg->host->controller;
return dev->driver->resume(dev, 0);
#endif
}
static int gadget_suspend(struct isp1301 *isp)
{
- isp->otg.gadget->b_hnp_enable = 0;
- isp->otg.gadget->a_hnp_support = 0;
- isp->otg.gadget->a_alt_hnp_support = 0;
- return usb_gadget_vbus_disconnect(isp->otg.gadget);
+ isp->phy.otg->gadget->b_hnp_enable = 0;
+ isp->phy.otg->gadget->a_hnp_support = 0;
+ isp->phy.otg->gadget->a_alt_hnp_support = 0;
+ return usb_gadget_vbus_disconnect(isp->phy.otg->gadget);
}
/*-------------------------------------------------------------------------*/
@@ -341,19 +341,19 @@
{
u32 l;
- if (isp->otg.state == OTG_STATE_A_IDLE)
+ if (isp->phy.state == OTG_STATE_A_IDLE)
return;
- isp->otg.default_a = 1;
- if (isp->otg.host) {
- isp->otg.host->is_b_host = 0;
+ isp->phy.otg->default_a = 1;
+ if (isp->phy.otg->host) {
+ isp->phy.otg->host->is_b_host = 0;
host_suspend(isp);
}
- if (isp->otg.gadget) {
- isp->otg.gadget->is_a_peripheral = 1;
+ if (isp->phy.otg->gadget) {
+ isp->phy.otg->gadget->is_a_peripheral = 1;
gadget_suspend(isp);
}
- isp->otg.state = OTG_STATE_A_IDLE;
+ isp->phy.state = OTG_STATE_A_IDLE;
l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
omap_writel(l, OTG_CTRL);
isp->last_otg_ctrl = l;
@@ -365,19 +365,19 @@
{
u32 l;
- if (isp->otg.state == OTG_STATE_B_IDLE)
+ if (isp->phy.state == OTG_STATE_B_IDLE)
return;
- isp->otg.default_a = 0;
- if (isp->otg.host) {
- isp->otg.host->is_b_host = 1;
+ isp->phy.otg->default_a = 0;
+ if (isp->phy.otg->host) {
+ isp->phy.otg->host->is_b_host = 1;
host_suspend(isp);
}
- if (isp->otg.gadget) {
- isp->otg.gadget->is_a_peripheral = 0;
+ if (isp->phy.otg->gadget) {
+ isp->phy.otg->gadget->is_a_peripheral = 0;
gadget_suspend(isp);
}
- isp->otg.state = OTG_STATE_B_IDLE;
+ isp->phy.state = OTG_STATE_B_IDLE;
l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
omap_writel(l, OTG_CTRL);
isp->last_otg_ctrl = l;
@@ -478,7 +478,7 @@
default:
break;
}
- if (isp->otg.state == state && !extra)
+ if (isp->phy.state == state && !extra)
return;
pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag,
otg_state_string(state), fsm, state_name(isp),
@@ -502,22 +502,23 @@
if (int_src & INTR_SESS_VLD)
otg_ctrl |= OTG_ASESSVLD;
- else if (isp->otg.state == OTG_STATE_A_WAIT_VFALL) {
+ else if (isp->phy.state == OTG_STATE_A_WAIT_VFALL) {
a_idle(isp, "vfall");
otg_ctrl &= ~OTG_CTRL_BITS;
}
if (int_src & INTR_VBUS_VLD)
otg_ctrl |= OTG_VBUSVLD;
if (int_src & INTR_ID_GND) { /* default-A */
- if (isp->otg.state == OTG_STATE_B_IDLE
- || isp->otg.state == OTG_STATE_UNDEFINED) {
+ if (isp->phy.state == OTG_STATE_B_IDLE
+ || isp->phy.state
+ == OTG_STATE_UNDEFINED) {
a_idle(isp, "init");
return;
}
} else { /* default-B */
otg_ctrl |= OTG_ID;
- if (isp->otg.state == OTG_STATE_A_IDLE
- || isp->otg.state == OTG_STATE_UNDEFINED) {
+ if (isp->phy.state == OTG_STATE_A_IDLE
+ || isp->phy.state == OTG_STATE_UNDEFINED) {
b_idle(isp, "init");
return;
}
@@ -551,14 +552,14 @@
isp->last_otg_ctrl = otg_ctrl;
otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS;
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case OTG_STATE_B_IDLE:
case OTG_STATE_B_PERIPHERAL:
case OTG_STATE_B_SRP_INIT:
if (!(otg_ctrl & OTG_PULLUP)) {
// if (otg_ctrl & OTG_B_HNPEN) {
- if (isp->otg.gadget->b_hnp_enable) {
- isp->otg.state = OTG_STATE_B_WAIT_ACON;
+ if (isp->phy.otg->gadget->b_hnp_enable) {
+ isp->phy.state = OTG_STATE_B_WAIT_ACON;
pr_debug(" --> b_wait_acon\n");
}
goto pulldown;
@@ -585,10 +586,10 @@
else clr |= ISP; \
} while (0)
- if (!(isp->otg.host))
+ if (!(isp->phy.otg->host))
otg_ctrl &= ~OTG_DRV_VBUS;
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case OTG_STATE_A_SUSPEND:
if (otg_ctrl & OTG_DRV_VBUS) {
set |= OTG1_VBUS_DRV;
@@ -599,7 +600,7 @@
/* FALLTHROUGH */
case OTG_STATE_A_VBUS_ERR:
- isp->otg.state = OTG_STATE_A_WAIT_VFALL;
+ isp->phy.state = OTG_STATE_A_WAIT_VFALL;
pr_debug(" --> a_wait_vfall\n");
/* FALLTHROUGH */
case OTG_STATE_A_WAIT_VFALL:
@@ -608,7 +609,7 @@
break;
case OTG_STATE_A_IDLE:
if (otg_ctrl & OTG_DRV_VBUS) {
- isp->otg.state = OTG_STATE_A_WAIT_VRISE;
+ isp->phy.state = OTG_STATE_A_WAIT_VRISE;
pr_debug(" --> a_wait_vrise\n");
}
/* FALLTHROUGH */
@@ -628,17 +629,17 @@
if (otg_change & OTG_PULLUP) {
u32 l;
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case OTG_STATE_B_IDLE:
if (clr & OTG1_DP_PULLUP)
break;
- isp->otg.state = OTG_STATE_B_PERIPHERAL;
+ isp->phy.state = OTG_STATE_B_PERIPHERAL;
pr_debug(" --> b_peripheral\n");
break;
case OTG_STATE_A_SUSPEND:
if (clr & OTG1_DP_PULLUP)
break;
- isp->otg.state = OTG_STATE_A_PERIPHERAL;
+ isp->phy.state = OTG_STATE_A_PERIPHERAL;
pr_debug(" --> a_peripheral\n");
break;
default:
@@ -659,6 +660,7 @@
u32 otg_ctrl;
int ret = IRQ_NONE;
struct isp1301 *isp = _isp;
+ struct usb_otg *otg = isp->phy.otg;
/* update ISP1301 transceiver from OTG controller */
if (otg_irq & OPRT_CHG) {
@@ -675,7 +677,7 @@
* remote wakeup (SRP, normal) using their own timer
* to give "check cable and A-device" messages.
*/
- if (isp->otg.state == OTG_STATE_B_SRP_INIT)
+ if (isp->phy.state == OTG_STATE_B_SRP_INIT)
b_idle(isp, "srp_timeout");
omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
@@ -693,7 +695,7 @@
omap_writel(otg_ctrl, OTG_CTRL);
/* subset of b_peripheral()... */
- isp->otg.state = OTG_STATE_B_PERIPHERAL;
+ isp->phy.state = OTG_STATE_B_PERIPHERAL;
pr_debug(" --> b_peripheral\n");
omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
@@ -705,9 +707,9 @@
state_name(isp), omap_readl(OTG_CTRL));
isp1301_defer_work(isp, WORK_UPDATE_OTG);
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case OTG_STATE_A_IDLE:
- if (!isp->otg.host)
+ if (!otg->host)
break;
isp1301_defer_work(isp, WORK_HOST_RESUME);
otg_ctrl = omap_readl(OTG_CTRL);
@@ -736,7 +738,7 @@
otg_ctrl |= OTG_BUSDROP;
otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
omap_writel(otg_ctrl, OTG_CTRL);
- isp->otg.state = OTG_STATE_A_WAIT_VFALL;
+ isp->phy.state = OTG_STATE_A_WAIT_VFALL;
omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
ret = IRQ_HANDLED;
@@ -750,7 +752,7 @@
otg_ctrl |= OTG_BUSDROP;
otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
omap_writel(otg_ctrl, OTG_CTRL);
- isp->otg.state = OTG_STATE_A_VBUS_ERR;
+ isp->phy.state = OTG_STATE_A_VBUS_ERR;
omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
ret = IRQ_HANDLED;
@@ -771,7 +773,7 @@
/* role is peripheral */
if (otg_ctrl & OTG_DRIVER_SEL) {
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case OTG_STATE_A_IDLE:
b_idle(isp, __func__);
break;
@@ -787,19 +789,19 @@
omap_writel(otg_ctrl | OTG_A_BUSREQ, OTG_CTRL);
}
- if (isp->otg.host) {
- switch (isp->otg.state) {
+ if (otg->host) {
+ switch (isp->phy.state) {
case OTG_STATE_B_WAIT_ACON:
- isp->otg.state = OTG_STATE_B_HOST;
+ isp->phy.state = OTG_STATE_B_HOST;
pr_debug(" --> b_host\n");
kick = 1;
break;
case OTG_STATE_A_WAIT_BCON:
- isp->otg.state = OTG_STATE_A_HOST;
+ isp->phy.state = OTG_STATE_A_HOST;
pr_debug(" --> a_host\n");
break;
case OTG_STATE_A_PERIPHERAL:
- isp->otg.state = OTG_STATE_A_WAIT_BCON;
+ isp->phy.state = OTG_STATE_A_WAIT_BCON;
pr_debug(" --> a_wait_bcon\n");
break;
default:
@@ -813,8 +815,7 @@
ret = IRQ_HANDLED;
if (kick)
- usb_bus_start_enum(isp->otg.host,
- isp->otg.host->otg_port);
+ usb_bus_start_enum(otg->host, otg->host->otg_port);
}
check_state(isp, __func__);
@@ -930,7 +931,7 @@
l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
omap_writel(l, OTG_CTRL);
- usb_gadget_vbus_connect(isp->otg.gadget);
+ usb_gadget_vbus_connect(isp->phy.otg->gadget);
#ifdef CONFIG_USB_OTG
enable_vbus_draw(isp, 8);
@@ -940,7 +941,7 @@
/* UDC driver just set OTG_BSESSVLD */
isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP);
isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN);
- isp->otg.state = OTG_STATE_B_PERIPHERAL;
+ isp->phy.state = OTG_STATE_B_PERIPHERAL;
pr_debug(" --> b_peripheral\n");
dump_regs(isp, "2periph");
#endif
@@ -948,8 +949,9 @@
static void isp_update_otg(struct isp1301 *isp, u8 stat)
{
+ struct usb_otg *otg = isp->phy.otg;
u8 isp_stat, isp_bstat;
- enum usb_otg_state state = isp->otg.state;
+ enum usb_otg_state state = isp->phy.state;
if (stat & INTR_BDIS_ACON)
pr_debug("OTG: BDIS_ACON, %s\n", state_name(isp));
@@ -957,7 +959,7 @@
/* start certain state transitions right away */
isp_stat = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
if (isp_stat & INTR_ID_GND) {
- if (isp->otg.default_a) {
+ if (otg->default_a) {
switch (state) {
case OTG_STATE_B_IDLE:
a_idle(isp, "idle");
@@ -972,7 +974,7 @@
* when HNP is used.
*/
if (isp_stat & INTR_VBUS_VLD)
- isp->otg.state = OTG_STATE_A_HOST;
+ isp->phy.state = OTG_STATE_A_HOST;
break;
case OTG_STATE_A_WAIT_VFALL:
if (!(isp_stat & INTR_SESS_VLD))
@@ -980,7 +982,7 @@
break;
default:
if (!(isp_stat & INTR_VBUS_VLD))
- isp->otg.state = OTG_STATE_A_VBUS_ERR;
+ isp->phy.state = OTG_STATE_A_VBUS_ERR;
break;
}
isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
@@ -989,14 +991,14 @@
case OTG_STATE_B_PERIPHERAL:
case OTG_STATE_B_HOST:
case OTG_STATE_B_WAIT_ACON:
- usb_gadget_vbus_disconnect(isp->otg.gadget);
+ usb_gadget_vbus_disconnect(otg->gadget);
break;
default:
break;
}
if (state != OTG_STATE_A_IDLE)
a_idle(isp, "id");
- if (isp->otg.host && state == OTG_STATE_A_IDLE)
+ if (otg->host && state == OTG_STATE_A_IDLE)
isp1301_defer_work(isp, WORK_HOST_RESUME);
isp_bstat = 0;
}
@@ -1006,10 +1008,10 @@
/* if user unplugged mini-A end of cable,
* don't bypass A_WAIT_VFALL.
*/
- if (isp->otg.default_a) {
+ if (otg->default_a) {
switch (state) {
default:
- isp->otg.state = OTG_STATE_A_WAIT_VFALL;
+ isp->phy.state = OTG_STATE_A_WAIT_VFALL;
break;
case OTG_STATE_A_WAIT_VFALL:
state = OTG_STATE_A_IDLE;
@@ -1022,7 +1024,7 @@
host_suspend(isp);
isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1,
MC1_BDIS_ACON_EN);
- isp->otg.state = OTG_STATE_B_IDLE;
+ isp->phy.state = OTG_STATE_B_IDLE;
l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
l &= ~OTG_CTRL_BITS;
omap_writel(l, OTG_CTRL);
@@ -1033,7 +1035,7 @@
}
isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case OTG_STATE_B_PERIPHERAL:
case OTG_STATE_B_WAIT_ACON:
case OTG_STATE_B_HOST:
@@ -1055,7 +1057,7 @@
omap_writel(l, OTG_CTRL);
/* FALLTHROUGH */
case OTG_STATE_B_IDLE:
- if (isp->otg.gadget && (isp_bstat & OTG_B_SESS_VLD)) {
+ if (otg->gadget && (isp_bstat & OTG_B_SESS_VLD)) {
#ifdef CONFIG_USB_OTG
update_otg1(isp, isp_stat);
update_otg2(isp, isp_bstat);
@@ -1073,7 +1075,7 @@
}
}
- if (state != isp->otg.state)
+ if (state != isp->phy.state)
pr_debug(" isp, %s -> %s\n",
otg_state_string(state), state_name(isp));
@@ -1131,10 +1133,10 @@
* skip A_WAIT_VRISE; hc transitions invisibly
* skip A_WAIT_BCON; same.
*/
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case OTG_STATE_A_WAIT_BCON:
case OTG_STATE_A_WAIT_VRISE:
- isp->otg.state = OTG_STATE_A_HOST;
+ isp->phy.state = OTG_STATE_A_HOST;
pr_debug(" --> a_host\n");
otg_ctrl = omap_readl(OTG_CTRL);
otg_ctrl |= OTG_A_BUSREQ;
@@ -1143,7 +1145,7 @@
omap_writel(otg_ctrl, OTG_CTRL);
break;
case OTG_STATE_B_WAIT_ACON:
- isp->otg.state = OTG_STATE_B_HOST;
+ isp->phy.state = OTG_STATE_B_HOST;
pr_debug(" --> b_host (acon)\n");
break;
case OTG_STATE_B_HOST:
@@ -1204,6 +1206,7 @@
/* ugly -- i2c hijacks our memory hook to wait_for_completion() */
if (isp->i2c_release)
isp->i2c_release(dev);
+ kfree(isp->phy.otg);
kfree (isp);
}
@@ -1274,9 +1277,9 @@
/* add or disable the host device+driver */
static int
-isp1301_set_host(struct usb_phy *otg, struct usb_bus *host)
+isp1301_set_host(struct usb_otg *otg, struct usb_bus *host)
{
- struct isp1301 *isp = container_of(otg, struct isp1301, otg);
+ struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy);
if (!otg || isp != the_transceiver)
return -ENODEV;
@@ -1284,21 +1287,21 @@
if (!host) {
omap_writew(0, OTG_IRQ_EN);
power_down(isp);
- isp->otg.host = NULL;
+ otg->host = NULL;
return 0;
}
#ifdef CONFIG_USB_OTG
- isp->otg.host = host;
+ otg->host = host;
dev_dbg(&isp->client->dev, "registered host\n");
host_suspend(isp);
- if (isp->otg.gadget)
+ if (otg->gadget)
return isp1301_otg_enable(isp);
return 0;
#elif !defined(CONFIG_USB_GADGET_OMAP)
// FIXME update its refcount
- isp->otg.host = host;
+ otg->host = host;
power_up(isp);
@@ -1330,9 +1333,9 @@
}
static int
-isp1301_set_peripheral(struct usb_phy *otg, struct usb_gadget *gadget)
+isp1301_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
{
- struct isp1301 *isp = container_of(otg, struct isp1301, otg);
+ struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy);
#ifndef CONFIG_USB_OTG
u32 l;
#endif
@@ -1342,24 +1345,24 @@
if (!gadget) {
omap_writew(0, OTG_IRQ_EN);
- if (!isp->otg.default_a)
+ if (!otg->default_a)
enable_vbus_draw(isp, 0);
- usb_gadget_vbus_disconnect(isp->otg.gadget);
- isp->otg.gadget = NULL;
+ usb_gadget_vbus_disconnect(otg->gadget);
+ otg->gadget = NULL;
power_down(isp);
return 0;
}
#ifdef CONFIG_USB_OTG
- isp->otg.gadget = gadget;
+ otg->gadget = gadget;
dev_dbg(&isp->client->dev, "registered gadget\n");
/* gadget driver may be suspended until vbus_connect () */
- if (isp->otg.host)
+ if (otg->host)
return isp1301_otg_enable(isp);
return 0;
#elif !defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OHCI_HCD_MODULE)
- isp->otg.gadget = gadget;
+ otg->gadget = gadget;
// FIXME update its refcount
l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
@@ -1368,7 +1371,7 @@
omap_writel(l, OTG_CTRL);
power_up(isp);
- isp->otg.state = OTG_STATE_B_IDLE;
+ isp->phy.state = OTG_STATE_B_IDLE;
if (machine_is_omap_h2() || machine_is_omap_h3())
isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
@@ -1409,13 +1412,13 @@
}
static int
-isp1301_start_srp(struct usb_phy *dev)
+isp1301_start_srp(struct usb_otg *otg)
{
- struct isp1301 *isp = container_of(dev, struct isp1301, otg);
+ struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy);
u32 otg_ctrl;
- if (!dev || isp != the_transceiver
- || isp->otg.state != OTG_STATE_B_IDLE)
+ if (!otg || isp != the_transceiver
+ || isp->phy.state != OTG_STATE_B_IDLE)
return -ENODEV;
otg_ctrl = omap_readl(OTG_CTRL);
@@ -1425,7 +1428,7 @@
otg_ctrl |= OTG_B_BUSREQ;
otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK;
omap_writel(otg_ctrl, OTG_CTRL);
- isp->otg.state = OTG_STATE_B_SRP_INIT;
+ isp->phy.state = OTG_STATE_B_SRP_INIT;
pr_debug("otg: SRP, %s ... %06x\n", state_name(isp),
omap_readl(OTG_CTRL));
@@ -1436,27 +1439,26 @@
}
static int
-isp1301_start_hnp(struct usb_phy *dev)
+isp1301_start_hnp(struct usb_otg *otg)
{
#ifdef CONFIG_USB_OTG
- struct isp1301 *isp = container_of(dev, struct isp1301, otg);
+ struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy);
u32 l;
- if (!dev || isp != the_transceiver)
+ if (!otg || isp != the_transceiver)
return -ENODEV;
- if (isp->otg.default_a && (isp->otg.host == NULL
- || !isp->otg.host->b_hnp_enable))
+ if (otg->default_a && (otg->host == NULL || !otg->host->b_hnp_enable))
return -ENOTCONN;
- if (!isp->otg.default_a && (isp->otg.gadget == NULL
- || !isp->otg.gadget->b_hnp_enable))
+ if (!otg->default_a && (otg->gadget == NULL
+ || !otg->gadget->b_hnp_enable))
return -ENOTCONN;
/* We want hardware to manage most HNP protocol timings.
* So do this part as early as possible...
*/
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case OTG_STATE_B_HOST:
- isp->otg.state = OTG_STATE_B_PERIPHERAL;
+ isp->phy.state = OTG_STATE_B_PERIPHERAL;
/* caller will suspend next */
break;
case OTG_STATE_A_HOST:
@@ -1466,7 +1468,7 @@
MC1_BDIS_ACON_EN);
#endif
/* caller must suspend then clear A_BUSREQ */
- usb_gadget_vbus_connect(isp->otg.gadget);
+ usb_gadget_vbus_connect(otg->gadget);
l = omap_readl(OTG_CTRL);
l |= OTG_A_SETB_HNPEN;
omap_writel(l, OTG_CTRL);
@@ -1503,6 +1505,12 @@
if (!isp)
return 0;
+ isp->phy.otg = kzalloc(sizeof *isp->phy.otg, GFP_KERNEL);
+ if (!isp->phy.otg) {
+ kfree(isp);
+ return 0;
+ }
+
INIT_WORK(&isp->work, isp1301_work);
init_timer(&isp->timer);
isp->timer.function = isp1301_timer;
@@ -1576,14 +1584,15 @@
goto fail;
}
- isp->otg.dev = &i2c->dev;
- isp->otg.label = DRIVER_NAME;
+ isp->phy.dev = &i2c->dev;
+ isp->phy.label = DRIVER_NAME;
+ isp->phy.set_power = isp1301_set_power,
- isp->otg.set_host = isp1301_set_host,
- isp->otg.set_peripheral = isp1301_set_peripheral,
- isp->otg.set_power = isp1301_set_power,
- isp->otg.start_srp = isp1301_start_srp,
- isp->otg.start_hnp = isp1301_start_hnp,
+ isp->phy.otg->phy = &isp->phy;
+ isp->phy.otg->set_host = isp1301_set_host,
+ isp->phy.otg->set_peripheral = isp1301_set_peripheral,
+ isp->phy.otg->start_srp = isp1301_start_srp,
+ isp->phy.otg->start_hnp = isp1301_start_hnp,
enable_vbus_draw(isp, 0);
power_down(isp);
@@ -1601,7 +1610,7 @@
dev_dbg(&i2c->dev, "scheduled timer, %d min\n", TIMER_MINUTES);
#endif
- status = otg_set_transceiver(&isp->otg);
+ status = usb_set_transceiver(&isp->phy);
if (status < 0)
dev_err(&i2c->dev, "can't register transceiver, %d\n",
status);
@@ -1609,6 +1618,7 @@
return 0;
fail:
+ kfree(isp->phy.otg);
kfree(isp);
return -ENODEV;
}
@@ -1639,7 +1649,7 @@
static void __exit isp_exit(void)
{
if (the_transceiver)
- otg_set_transceiver(NULL);
+ usb_set_transceiver(NULL);
i2c_del_driver(&isp1301_driver);
}
module_exit(isp_exit);