bna: remove RXF_E_PAUSE and RXF_E_RESUME events
RXF_E_PAUSE & RXF_E_RESUME events are never sent for bna_rxf object so
they needn't to be handled. The bna_rxf's state bna_rxf_sm_fltr_clr_wait
and function bna_rxf_fltr_clear are unused after this so remove them also.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
index 471e74d..ccf48a1 100644
--- a/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
+++ b/drivers/net/ethernet/brocade/bna/bna_tx_rx.c
@@ -46,7 +46,6 @@
static int bna_rxf_cfg_apply(struct bna_rxf *rxf);
static void bna_rxf_cfg_reset(struct bna_rxf *rxf);
-static int bna_rxf_fltr_clear(struct bna_rxf *rxf);
static int bna_rxf_ucast_cfg_apply(struct bna_rxf *rxf);
static int bna_rxf_promisc_cfg_apply(struct bna_rxf *rxf);
static int bna_rxf_allmulti_cfg_apply(struct bna_rxf *rxf);
@@ -66,8 +65,6 @@
enum bna_rxf_event);
bfa_fsm_state_decl(bna_rxf, started, struct bna_rxf,
enum bna_rxf_event);
-bfa_fsm_state_decl(bna_rxf, fltr_clr_wait, struct bna_rxf,
- enum bna_rxf_event);
bfa_fsm_state_decl(bna_rxf, last_resp_wait, struct bna_rxf,
enum bna_rxf_event);
@@ -101,14 +98,6 @@
call_rxf_cam_fltr_cbfn(rxf);
break;
- case RXF_E_PAUSE:
- rxf->flags |= BNA_RXF_F_PAUSED;
- break;
-
- case RXF_E_RESUME:
- rxf->flags &= ~BNA_RXF_F_PAUSED;
- break;
-
default:
bfa_sm_fault(event);
}
@@ -132,11 +121,6 @@
call_rxf_cam_fltr_cbfn(rxf);
break;
- case RXF_E_RESUME:
- rxf->flags &= ~BNA_RXF_F_PAUSED;
- bfa_fsm_set_state(rxf, bna_rxf_sm_cfg_wait);
- break;
-
default:
bfa_sm_fault(event);
}
@@ -170,12 +154,6 @@
/* No-op */
break;
- case RXF_E_PAUSE:
- rxf->flags |= BNA_RXF_F_PAUSED;
- call_rxf_start_cbfn(rxf);
- bfa_fsm_set_state(rxf, bna_rxf_sm_fltr_clr_wait);
- break;
-
case RXF_E_FW_RESP:
if (!bna_rxf_cfg_apply(rxf)) {
/* No more pending config updates */
@@ -209,40 +187,6 @@
bfa_fsm_set_state(rxf, bna_rxf_sm_cfg_wait);
break;
- case RXF_E_PAUSE:
- rxf->flags |= BNA_RXF_F_PAUSED;
- if (!bna_rxf_fltr_clear(rxf))
- bfa_fsm_set_state(rxf, bna_rxf_sm_paused);
- else
- bfa_fsm_set_state(rxf, bna_rxf_sm_fltr_clr_wait);
- break;
-
- default:
- bfa_sm_fault(event);
- }
-}
-
-static void
-bna_rxf_sm_fltr_clr_wait_entry(struct bna_rxf *rxf)
-{
-}
-
-static void
-bna_rxf_sm_fltr_clr_wait(struct bna_rxf *rxf, enum bna_rxf_event event)
-{
- switch (event) {
- case RXF_E_FAIL:
- bna_rxf_cfg_reset(rxf);
- bfa_fsm_set_state(rxf, bna_rxf_sm_stopped);
- break;
-
- case RXF_E_FW_RESP:
- if (!bna_rxf_fltr_clear(rxf)) {
- /* No more pending CAM entries to clear */
- bfa_fsm_set_state(rxf, bna_rxf_sm_paused);
- }
- break;
-
default:
bfa_sm_fault(event);
}
@@ -652,25 +596,6 @@
return 0;
}
-/* Only software reset */
-static int
-bna_rxf_fltr_clear(struct bna_rxf *rxf)
-{
- if (bna_rxf_ucast_cfg_reset(rxf, BNA_HARD_CLEANUP))
- return 1;
-
- if (bna_rxf_mcast_cfg_reset(rxf, BNA_HARD_CLEANUP))
- return 1;
-
- if (bna_rxf_promisc_cfg_reset(rxf, BNA_HARD_CLEANUP))
- return 1;
-
- if (bna_rxf_allmulti_cfg_reset(rxf, BNA_HARD_CLEANUP))
- return 1;
-
- return 0;
-}
-
static void
bna_rxf_cfg_reset(struct bna_rxf *rxf)
{
diff --git a/drivers/net/ethernet/brocade/bna/bna_types.h b/drivers/net/ethernet/brocade/bna/bna_types.h
index 095bd63..e56f650 100644
--- a/drivers/net/ethernet/brocade/bna/bna_types.h
+++ b/drivers/net/ethernet/brocade/bna/bna_types.h
@@ -191,8 +191,6 @@
RXF_E_STOP = 2,
RXF_E_FAIL = 3,
RXF_E_CONFIG = 4,
- RXF_E_PAUSE = 5,
- RXF_E_RESUME = 6,
RXF_E_FW_RESP = 7,
};