Input: cyapa - use 'error' for error codes
Let's use 'error' variable instead of 'ret' when we need to store erro
codes.
Signed-off-by: Dudley Du <dudley.dulixin@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
index 94e7327..1bece8c 100644
--- a/drivers/input/mouse/cyapa.c
+++ b/drivers/input/mouse/cyapa.c
@@ -6,7 +6,7 @@
* Daniel Kurtz <djkurtz@chromium.org>
* Benson Leung <bleung@chromium.org>
*
- * Copyright (C) 2011-2012 Cypress Semiconductor, Inc.
+ * Copyright (C) 2011-2014 Cypress Semiconductor, Inc.
* Copyright (C) 2011-2012 Google, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
@@ -421,8 +421,8 @@
*/
static int cyapa_get_state(struct cyapa *cyapa)
{
- int ret;
u8 status[BL_STATUS_SIZE];
+ int error;
cyapa->state = CYAPA_STATE_NO_DEVICE;
@@ -432,18 +432,18 @@
* If the device is in operation mode, this will be the DATA regs.
*
*/
- ret = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, BL_STATUS_SIZE,
- status);
+ error = cyapa_i2c_reg_read_block(cyapa, BL_HEAD_OFFSET, BL_STATUS_SIZE,
+ status);
/*
* On smbus systems in OP mode, the i2c_reg_read will fail with
* -ETIMEDOUT. In this case, try again using the smbus equivalent
* command. This should return a BL_HEAD indicating CYAPA_STATE_OP.
*/
- if (cyapa->smbus && (ret == -ETIMEDOUT || ret == -ENXIO))
- ret = cyapa_read_block(cyapa, CYAPA_CMD_BL_STATUS, status);
+ if (cyapa->smbus && (error == -ETIMEDOUT || error == -ENXIO))
+ error = cyapa_read_block(cyapa, CYAPA_CMD_BL_STATUS, status);
- if (ret != BL_STATUS_SIZE)
+ if (error != BL_STATUS_SIZE)
goto error;
if ((status[REG_OP_STATUS] & OP_STATUS_SRC) == OP_STATUS_SRC) {
@@ -453,7 +453,7 @@
cyapa->state = CYAPA_STATE_OP;
break;
default:
- ret = -EAGAIN;
+ error = -EAGAIN;
goto error;
}
} else {
@@ -467,7 +467,7 @@
return 0;
error:
- return (ret < 0) ? ret : -EAGAIN;
+ return (error < 0) ? error : -EAGAIN;
}
/*
@@ -486,31 +486,31 @@
*/
static int cyapa_poll_state(struct cyapa *cyapa, unsigned int timeout)
{
- int ret;
+ int error;
int tries = timeout / 100;
- ret = cyapa_get_state(cyapa);
- while ((ret || cyapa->state >= CYAPA_STATE_BL_BUSY) && tries--) {
+ error = cyapa_get_state(cyapa);
+ while ((error || cyapa->state >= CYAPA_STATE_BL_BUSY) && tries--) {
msleep(100);
- ret = cyapa_get_state(cyapa);
+ error = cyapa_get_state(cyapa);
}
- return (ret == -EAGAIN || ret == -ETIMEDOUT) ? -ETIMEDOUT : ret;
+ return (error == -EAGAIN || error == -ETIMEDOUT) ? -ETIMEDOUT : error;
}
static int cyapa_bl_deactivate(struct cyapa *cyapa)
{
- int ret;
+ int error;
- ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_deactivate),
- bl_deactivate);
- if (ret < 0)
- return ret;
+ error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_deactivate),
+ bl_deactivate);
+ if (error)
+ return error;
/* wait for bootloader to switch to idle state; should take < 100ms */
msleep(100);
- ret = cyapa_poll_state(cyapa, 500);
- if (ret < 0)
- return ret;
+ error = cyapa_poll_state(cyapa, 500);
+ if (error)
+ return error;
if (cyapa->state != CYAPA_STATE_BL_IDLE)
return -EAGAIN;
return 0;
@@ -531,11 +531,11 @@
*/
static int cyapa_bl_exit(struct cyapa *cyapa)
{
- int ret;
+ int error;
- ret = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_exit), bl_exit);
- if (ret < 0)
- return ret;
+ error = cyapa_i2c_reg_write_block(cyapa, 0, sizeof(bl_exit), bl_exit);
+ if (error)
+ return error;
/*
* Wait for bootloader to exit, and operation mode to start.
@@ -547,9 +547,9 @@
* updated to new firmware, it must first calibrate its sensors, which
* can take up to an additional 2 seconds.
*/
- ret = cyapa_poll_state(cyapa, 2000);
- if (ret < 0)
- return ret;
+ error = cyapa_poll_state(cyapa, 2000);
+ if (error < 0)
+ return error;
if (cyapa->state != CYAPA_STATE_OP)
return -EAGAIN;
@@ -639,28 +639,28 @@
{
struct device *dev = &cyapa->client->dev;
static const char unique_str[] = "CYTRA";
- int ret;
+ int error;
- ret = cyapa_poll_state(cyapa, 2000);
- if (ret < 0)
- return ret;
+ error = cyapa_poll_state(cyapa, 2000);
+ if (error)
+ return error;
switch (cyapa->state) {
case CYAPA_STATE_BL_ACTIVE:
- ret = cyapa_bl_deactivate(cyapa);
- if (ret)
- return ret;
+ error = cyapa_bl_deactivate(cyapa);
+ if (error)
+ return error;
/* Fallthrough state */
case CYAPA_STATE_BL_IDLE:
- ret = cyapa_bl_exit(cyapa);
- if (ret)
- return ret;
+ error = cyapa_bl_exit(cyapa);
+ if (error)
+ return error;
/* Fallthrough state */
case CYAPA_STATE_OP:
- ret = cyapa_get_query_data(cyapa);
- if (ret < 0)
- return ret;
+ error = cyapa_get_query_data(cyapa);
+ if (error)
+ return error;
/* only support firmware protocol gen3 */
if (cyapa->gen != CYAPA_GEN3) {
@@ -790,7 +790,7 @@
input = devm_input_allocate_device(dev);
if (!input) {
- dev_err(dev, "allocate memory for input device failed\n");
+ dev_err(dev, "failed to allocate memory for input device.\n");
return -ENOMEM;
}
@@ -798,7 +798,7 @@
input->phys = cyapa->phys;
input->id.bustype = BUS_I2C;
input->id.version = 1;
- input->id.product = 0; /* means any product in eventcomm. */
+ input->id.product = 0; /* Means any product in eventcomm. */
input->dev.parent = &cyapa->client->dev;
input->open = cyapa_open;
@@ -808,7 +808,7 @@
__set_bit(EV_ABS, input->evbit);
- /* finger position */
+ /* Finger position */
input_set_abs_params(input, ABS_MT_POSITION_X, 0, cyapa->max_abs_x, 0,
0);
input_set_abs_params(input, ABS_MT_POSITION_Y, 0, cyapa->max_abs_y, 0,
@@ -830,7 +830,7 @@
if (cyapa->btn_capability == CAPABILITY_LEFT_BTN_MASK)
__set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
- /* handle pointer emulation and unused slots in core */
+ /* Handle pointer emulation and unused slots in core */
error = input_mt_init_slots(input, CYAPA_MAX_MT_SLOTS,
INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED);
if (error) {
@@ -894,7 +894,7 @@
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"cyapa", cyapa);
if (error) {
- dev_err(dev, "IRQ request failed: %d\n, ", error);
+ dev_err(dev, "failed to request threaded irq: %d\n", error);
return error;
}