| /* |
| * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved. |
| * |
| * The code contained herein is licensed under the GNU General Public |
| * License. You may obtain a copy of the GNU General Public License |
| * Version 2 or later at the following locations: |
| * |
| * http://www.opensource.org/licenses/gpl-license.html |
| * http://www.gnu.org/copyleft/gpl.html |
| * |
| * Create static mapping between physical to virtual memory. |
| */ |
| |
| #include <linux/mm.h> |
| #include <linux/init.h> |
| #include <linux/clk.h> |
| #include <linux/pinctrl/machine.h> |
| #include <linux/of_address.h> |
| |
| #include <asm/mach/map.h> |
| |
| #include "common.h" |
| #include "devices/devices-common.h" |
| #include "hardware.h" |
| #include "iomux-v3.h" |
| |
| /* |
| * Define the MX51 memory map. |
| */ |
| static struct map_desc mx51_io_desc[] __initdata = { |
| imx_map_entry(MX51, TZIC, MT_DEVICE), |
| imx_map_entry(MX51, IRAM, MT_DEVICE), |
| imx_map_entry(MX51, AIPS1, MT_DEVICE), |
| imx_map_entry(MX51, SPBA0, MT_DEVICE), |
| imx_map_entry(MX51, AIPS2, MT_DEVICE), |
| }; |
| |
| /* |
| * Define the MX53 memory map. |
| */ |
| static struct map_desc mx53_io_desc[] __initdata = { |
| imx_map_entry(MX53, TZIC, MT_DEVICE), |
| imx_map_entry(MX53, AIPS1, MT_DEVICE), |
| imx_map_entry(MX53, SPBA0, MT_DEVICE), |
| imx_map_entry(MX53, AIPS2, MT_DEVICE), |
| }; |
| |
| /* |
| * This function initializes the memory map. It is called during the |
| * system startup to create static physical to virtual memory mappings |
| * for the IO modules. |
| */ |
| void __init mx51_map_io(void) |
| { |
| iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc)); |
| } |
| |
| void __init mx53_map_io(void) |
| { |
| iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc)); |
| } |
| |
| /* |
| * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by |
| * the Freescale marketing division. However this did not remove the |
| * hardware from the chip which still needs to be configured for proper |
| * IPU support. |
| */ |
| static void __init imx51_ipu_mipi_setup(void) |
| { |
| void __iomem *hsc_addr; |
| hsc_addr = MX51_IO_ADDRESS(MX51_MIPI_HSC_BASE_ADDR); |
| |
| /* setup MIPI module to legacy mode */ |
| __raw_writel(0xf00, hsc_addr); |
| |
| /* CSI mode: reserved; DI control mode: legacy (from Freescale BSP) */ |
| __raw_writel(__raw_readl(hsc_addr + 0x800) | 0x30ff, |
| hsc_addr + 0x800); |
| } |
| |
| void __init imx51_init_early(void) |
| { |
| imx51_ipu_mipi_setup(); |
| mxc_set_cpu_type(MXC_CPU_MX51); |
| mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); |
| imx_src_init(); |
| } |
| |
| void __init imx53_init_early(void) |
| { |
| mxc_set_cpu_type(MXC_CPU_MX53); |
| mxc_iomux_v3_init(MX53_IO_ADDRESS(MX53_IOMUXC_BASE_ADDR)); |
| imx_src_init(); |
| } |
| |
| void __init mx51_init_irq(void) |
| { |
| tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR)); |
| } |
| |
| void __init mx53_init_irq(void) |
| { |
| struct device_node *np; |
| void __iomem *base; |
| |
| np = of_find_compatible_node(NULL, NULL, "fsl,imx53-tzic"); |
| base = of_iomap(np, 0); |
| WARN_ON(!base); |
| |
| tzic_init_irq(base); |
| } |
| |
| static struct sdma_platform_data imx51_sdma_pdata __initdata = { |
| .fw_name = "sdma-imx51.bin", |
| }; |
| |
| static const struct resource imx51_audmux_res[] __initconst = { |
| DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K), |
| }; |
| |
| void __init imx51_soc_init(void) |
| { |
| mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR)); |
| mxc_device_init(); |
| |
| /* i.mx51 has the i.mx35 type gpio */ |
| mxc_register_gpio("imx35-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH); |
| mxc_register_gpio("imx35-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH); |
| mxc_register_gpio("imx35-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH); |
| mxc_register_gpio("imx35-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH); |
| |
| pinctrl_provide_dummies(); |
| |
| /* i.mx51 has the i.mx35 type sdma */ |
| imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); |
| |
| /* Setup AIPS registers */ |
| imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS1_BASE_ADDR)); |
| imx_set_aips(MX51_IO_ADDRESS(MX51_AIPS2_BASE_ADDR)); |
| |
| /* i.mx51 has the i.mx31 type audmux */ |
| platform_device_register_simple("imx31-audmux", 0, imx51_audmux_res, |
| ARRAY_SIZE(imx51_audmux_res)); |
| } |
| |
| void __init imx51_init_late(void) |
| { |
| mx51_neon_fixup(); |
| imx5_pm_init(); |
| } |
| |
| void __init imx53_init_late(void) |
| { |
| imx5_pm_init(); |
| } |