ARM: dts: msm: Add ICE node for kona
Add ICE device node and crypto support in UFS
to support ICE based FBE.
Change-Id: I766ad7c6df63aecd1c1a657d2eb88c4fb95e2c1d
Signed-off-by: Zhen Kong <zkong@codeaurora.org>
diff --git a/arch/arm64/boot/dts/qcom/kona.dtsi b/arch/arm64/boot/dts/qcom/kona.dtsi
index fe36f5a..f0ac5c1 100644
--- a/arch/arm64/boot/dts/qcom/kona.dtsi
+++ b/arch/arm64/boot/dts/qcom/kona.dtsi
@@ -1750,10 +1750,34 @@
cell-index = <0>;
};
+ ufs_ice: ufsice@1d90000 {
+ compatible = "qcom,ice";
+ reg = <0x1d90000 0x8000>;
+ qcom,enable-ice-clk;
+ clock-names = "ufs_core_clk", "bus_clk",
+ "iface_clk", "ice_core_clk";
+ clocks = <&clock_gcc GCC_UFS_PHY_AXI_CLK>,
+ <&clock_gcc GCC_UFS_1X_CLKREF_EN>,
+ <&clock_gcc GCC_UFS_PHY_AHB_CLK>,
+ <&clock_gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+ qcom,op-freq-hz = <0>, <0>, <0>, <300000000>;
+ vdd-hba-supply = <&ufs_phy_gdsc>;
+ qcom,msm-bus,name = "ufs_ice_noc";
+ qcom,msm-bus,num-cases = <2>;
+ qcom,msm-bus,num-paths = <1>;
+ qcom,msm-bus,vectors-KBps =
+ <1 650 0 0>, /* No vote */
+ <1 650 1000 0>; /* Max. bandwidth */
+ qcom,bus-vector-names = "MIN",
+ "MAX";
+ qcom,instance-type = "ufs";
+ };
+
ufsphy_mem: ufsphy_mem@1d87000 {
reg = <0x1d87000 0xe00>; /* PHY regs */
reg-names = "phy_mem";
#phy-cells = <0>;
+ ufs-qcom-crypto = <&ufs_ice>;
lanes-per-direction = <2>;
@@ -1773,6 +1797,7 @@
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
phys = <&ufsphy_mem>;
phy-names = "ufsphy";
+ ufs-qcom-crypto = <&ufs_ice>;
lanes-per-direction = <2>;
dev-ref-clk-freq = <0>; /* 19.2 MHz */