Merge branch 'renesas/soc' into next/soc2
diff --git a/Documentation/ABI/testing/sysfs-devices-soc b/Documentation/ABI/testing/sysfs-devices-soc
new file mode 100644
index 0000000..6d9cc25
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-devices-soc
@@ -0,0 +1,58 @@
+What: /sys/devices/socX
+Date: January 2012
+contact: Lee Jones <lee.jones@linaro.org>
+Description:
+ The /sys/devices/ directory contains a sub-directory for each
+ System-on-Chip (SoC) device on a running platform. Information
+ regarding each SoC can be obtained by reading sysfs files. This
+ functionality is only available if implemented by the platform.
+
+ The directory created for each SoC will also house information
+ about devices which are commonly contained in /sys/devices/platform.
+ It has been agreed that if an SoC device exists, its supported
+ devices would be better suited to appear as children of that SoC.
+
+What: /sys/devices/socX/machine
+Date: January 2012
+contact: Lee Jones <lee.jones@linaro.org>
+Description:
+ Read-only attribute common to all SoCs. Contains the SoC machine
+ name (e.g. Ux500).
+
+What: /sys/devices/socX/family
+Date: January 2012
+contact: Lee Jones <lee.jones@linaro.org>
+Description:
+ Read-only attribute common to all SoCs. Contains SoC family name
+ (e.g. DB8500).
+
+What: /sys/devices/socX/soc_id
+Date: January 2012
+contact: Lee Jones <lee.jones@linaro.org>
+Description:
+ Read-only attribute supported by most SoCs. In the case of
+ ST-Ericsson's chips this contains the SoC serial number.
+
+What: /sys/devices/socX/revision
+Date: January 2012
+contact: Lee Jones <lee.jones@linaro.org>
+Description:
+ Read-only attribute supported by most SoCs. Contains the SoC's
+ manufacturing revision number.
+
+What: /sys/devices/socX/process
+Date: January 2012
+contact: Lee Jones <lee.jones@linaro.org>
+Description:
+ Read-only attribute supported ST-Ericsson's silicon. Contains the
+ the process by which the silicon chip was manufactured.
+
+What: /sys/bus/soc
+Date: January 2012
+contact: Lee Jones <lee.jones@linaro.org>
+Description:
+ The /sys/bus/soc/ directory contains the usual sub-folders
+ expected under most buses. /sys/bus/soc/devices is of particular
+ interest, as it contains a symlink for each SoC device found on
+ the system. Each symlink points back into the aforementioned
+ /sys/devices/socX devices.
diff --git a/Documentation/devicetree/bindings/arm/tegra/emc.txt b/Documentation/devicetree/bindings/arm/tegra/emc.txt
new file mode 100644
index 0000000..09335f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/emc.txt
@@ -0,0 +1,100 @@
+Embedded Memory Controller
+
+Properties:
+- name : Should be emc
+- #address-cells : Should be 1
+- #size-cells : Should be 0
+- compatible : Should contain "nvidia,tegra20-emc".
+- reg : Offset and length of the register set for the device
+- nvidia,use-ram-code : If present, the sub-nodes will be addressed
+ and chosen using the ramcode board selector. If omitted, only one
+ set of tables can be present and said tables will be used
+ irrespective of ram-code configuration.
+
+Child device nodes describe the memory settings for different configurations and clock rates.
+
+Example:
+
+ emc@7000f400 {
+ #address-cells = < 1 >;
+ #size-cells = < 0 >;
+ compatible = "nvidia,tegra20-emc";
+ reg = <0x7000f4000 0x200>;
+ }
+
+
+Embedded Memory Controller ram-code table
+
+If the emc node has the nvidia,use-ram-code property present, then the
+next level of nodes below the emc table are used to specify which settings
+apply for which ram-code settings.
+
+If the emc node lacks the nvidia,use-ram-code property, this level is omitted
+and the tables are stored directly under the emc node (see below).
+
+Properties:
+
+- name : Should be emc-tables
+- nvidia,ram-code : the binary representation of the ram-code board strappings
+ for which this node (and children) are valid.
+
+
+
+Embedded Memory Controller configuration table
+
+This is a table containing the EMC register settings for the various
+operating speeds of the memory controller. They are always located as
+subnodes of the emc controller node.
+
+There are two ways of specifying which tables to use:
+
+* The simplest is if there is just one set of tables in the device tree,
+ and they will always be used (based on which frequency is used).
+ This is the preferred method, especially when firmware can fill in
+ this information based on the specific system information and just
+ pass it on to the kernel.
+
+* The slightly more complex one is when more than one memory configuration
+ might exist on the system. The Tegra20 platform handles this during
+ early boot by selecting one out of possible 4 memory settings based
+ on a 2-pin "ram code" bootstrap setting on the board. The values of
+ these strappings can be read through a register in the SoC, and thus
+ used to select which tables to use.
+
+Properties:
+- name : Should be emc-table
+- compatible : Should contain "nvidia,tegra20-emc-table".
+- reg : either an opaque enumerator to tell different tables apart, or
+ the valid frequency for which the table should be used (in kHz).
+- clock-frequency : the clock frequency for the EMC at which this
+ table should be used (in kHz).
+- nvidia,emc-registers : a 46 word array of EMC registers to be programmed
+ for operation at the 'clock-frequency' setting.
+ The order and contents of the registers are:
+ RC, RFC, RAS, RP, R2W, W2R, R2P, W2P, RD_RCD, WR_RCD, RRD, REXT,
+ WDV, QUSE, QRST, QSAFE, RDV, REFRESH, BURST_REFRESH_NUM, PDEX2WR,
+ PDEX2RD, PCHG2PDEN, ACT2PDEN, AR2PDEN, RW2PDEN, TXSR, TCKE, TFAW,
+ TRPAB, TCLKSTABLE, TCLKSTOP, TREFBW, QUSE_EXTRA, FBIO_CFG6, ODT_WRITE,
+ ODT_READ, FBIO_CFG5, CFG_DIG_DLL, DLL_XFORM_DQS, DLL_XFORM_QUSE,
+ ZCAL_REF_CNT, ZCAL_WAIT_CNT, AUTO_CAL_INTERVAL, CFG_CLKTRIM_0,
+ CFG_CLKTRIM_1, CFG_CLKTRIM_2
+
+ emc-table@166000 {
+ reg = <166000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 166000 >;
+ nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 >;
+ };
+
+ emc-table@333000 {
+ reg = <333000>;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 333000 >;
+ nvidia,emc-registers = < 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 >;
+ };
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
new file mode 100644
index 0000000..b5846e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt
@@ -0,0 +1,19 @@
+NVIDIA Tegra Power Management Controller (PMC)
+
+Properties:
+- name : Should be pmc
+- compatible : Should contain "nvidia,tegra<chip>-pmc".
+- reg : Offset and length of the register set for the device
+- nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
+ The PMU is an external Power Management Unit, whose interrupt output
+ signal is fed into the PMC. This signal is optionally inverted, and then
+ fed into the ARM GIC. The PMC is not involved in the detection or
+ handling of this interrupt signal, merely its inversion.
+
+Example:
+
+pmc@7000f400 {
+ compatible = "nvidia,tegra20-pmc";
+ reg = <0x7000e400 0x400>;
+ nvidia,invert-interrupt;
+};
diff --git a/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
new file mode 100644
index 0000000..90fa7da
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/tegra20-apbdma.txt
@@ -0,0 +1,30 @@
+* NVIDIA Tegra APB DMA controller
+
+Required properties:
+- compatible: Should be "nvidia,<chip>-apbdma"
+- reg: Should contain DMA registers location and length. This shuld include
+ all of the per-channel registers.
+- interrupts: Should contain all of the per-channel DMA interrupts.
+
+Examples:
+
+apbdma: dma@6000a000 {
+ compatible = "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1200>;
+ interrupts = < 0 136 0x04
+ 0 137 0x04
+ 0 138 0x04
+ 0 139 0x04
+ 0 140 0x04
+ 0 141 0x04
+ 0 142 0x04
+ 0 143 0x04
+ 0 144 0x04
+ 0 145 0x04
+ 0 146 0x04
+ 0 147 0x04
+ 0 148 0x04
+ 0 149 0x04
+ 0 150 0x04
+ 0 151 0x04 >;
+};
diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
index eb4b530..023c952 100644
--- a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt
@@ -1,8 +1,40 @@
-NVIDIA Tegra 2 GPIO controller
+NVIDIA Tegra GPIO controller
Required properties:
-- compatible : "nvidia,tegra20-gpio"
+- compatible : "nvidia,tegra<chip>-gpio"
+- reg : Physical base address and length of the controller's registers.
+- interrupts : The interrupt outputs from the controller. For Tegra20,
+ there should be 7 interrupts specified, and for Tegra30, there should
+ be 8 interrupts specified.
- #gpio-cells : Should be two. The first cell is the pin number and the
second cell is used to specify optional parameters:
- bit 0 specifies polarity (0 for normal, 1 for inverted)
- gpio-controller : Marks the device node as a GPIO controller.
+- #interrupt-cells : Should be 2.
+ The first cell is the GPIO number.
+ The second cell is used to specify flags:
+ bits[3:0] trigger type and level flags:
+ 1 = low-to-high edge triggered.
+ 2 = high-to-low edge triggered.
+ 4 = active high level-sensitive.
+ 8 = active low level-sensitive.
+ Valid combinations are 1, 2, 3, 4, 8.
+- interrupt-controller : Marks the device node as an interrupt controller.
+
+Example:
+
+gpio: gpio@6000d000 {
+ compatible = "nvidia,tegra20-gpio";
+ reg = < 0x6000d000 0x1000 >;
+ interrupts = < 0 32 0x04
+ 0 33 0x04
+ 0 34 0x04
+ 0 35 0x04
+ 0 55 0x04
+ 0 87 0x04
+ 0 89 0x04 >;
+ #gpio-cells = <2>;
+ gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+};
diff --git a/Documentation/dynamic-debug-howto.txt b/Documentation/dynamic-debug-howto.txt
index f959909..74e6c77 100644
--- a/Documentation/dynamic-debug-howto.txt
+++ b/Documentation/dynamic-debug-howto.txt
@@ -12,7 +12,7 @@
Dynamic debug has even more useful features:
* Simple query language allows turning on and off debugging statements by
- matching any combination of:
+ matching any combination of 0 or 1 of:
- source filename
- function name
@@ -79,31 +79,24 @@
==========================
At the lexical level, a command comprises a sequence of words separated
-by whitespace characters. Note that newlines are treated as word
-separators and do *not* end a command or allow multiple commands to
-be done together. So these are all equivalent:
+by spaces or tabs. So these are all equivalent:
nullarbor:~ # echo -c 'file svcsock.c line 1603 +p' >
<debugfs>/dynamic_debug/control
nullarbor:~ # echo -c ' file svcsock.c line 1603 +p ' >
<debugfs>/dynamic_debug/control
-nullarbor:~ # echo -c 'file svcsock.c\nline 1603 +p' >
- <debugfs>/dynamic_debug/control
nullarbor:~ # echo -n 'file svcsock.c line 1603 +p' >
<debugfs>/dynamic_debug/control
-Commands are bounded by a write() system call. If you want to do
-multiple commands you need to do a separate "echo" for each, like:
+Command submissions are bounded by a write() system call.
+Multiple commands can be written together, separated by ';' or '\n'.
-nullarbor:~ # echo 'file svcsock.c line 1603 +p' > /proc/dprintk ;\
-> echo 'file svcsock.c line 1563 +p' > /proc/dprintk
+ ~# echo "func pnpacpi_get_resources +p; func pnp_assign_mem +p" \
+ > <debugfs>/dynamic_debug/control
-or even like:
+If your query set is big, you can batch them too:
-nullarbor:~ # (
-> echo 'file svcsock.c line 1603 +p' ;\
-> echo 'file svcsock.c line 1563 +p' ;\
-> ) > /proc/dprintk
+ ~# cat query-batch-file > <debugfs>/dynamic_debug/control
At the syntactical level, a command comprises a sequence of match
specifications, followed by a flags change specification.
@@ -144,11 +137,12 @@
func svc_tcp_accept
file
- The given string is compared against either the full
- pathname or the basename of the source file of each
- callsite. Examples:
+ The given string is compared against either the full pathname, the
+ src-root relative pathname, or the basename of the source file of
+ each callsite. Examples:
file svcsock.c
+ file kernel/freezer.c
file /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c
module
diff --git a/Documentation/filesystems/debugfs.txt b/Documentation/filesystems/debugfs.txt
index 6872c91..4e25758 100644
--- a/Documentation/filesystems/debugfs.txt
+++ b/Documentation/filesystems/debugfs.txt
@@ -14,7 +14,10 @@
mount -t debugfs none /sys/kernel/debug
-(Or an equivalent /etc/fstab line).
+(Or an equivalent /etc/fstab line).
+The debugfs root directory is accessible by anyone by default. To
+restrict access to the tree the "uid", "gid" and "mode" mount
+options can be used.
Note that the debugfs API is exported GPL-only to modules.
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index dfb0312..87693e6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -186,6 +186,9 @@
config FIQ
bool
+config NEED_RET_TO_USER
+ bool
+
config ARCH_MTD_XIP
bool
@@ -479,6 +482,7 @@
select ARCH_SUPPORTS_MSI
select VMSPLIT_1G
select NEED_MACH_MEMORY_H
+ select NEED_RET_TO_USER
help
Support for Intel's IOP13XX (XScale) family of processors.
@@ -486,6 +490,7 @@
bool "IOP32x-based"
depends on MMU
select CPU_XSCALE
+ select NEED_RET_TO_USER
select PLAT_IOP
select PCI
select ARCH_REQUIRE_GPIOLIB
@@ -497,6 +502,7 @@
bool "IOP33x-based"
depends on MMU
select CPU_XSCALE
+ select NEED_RET_TO_USER
select PLAT_IOP
select PCI
select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index e0d236d..03646c4 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -81,25 +81,6 @@
prompt "Kernel low-level debugging port"
depends on DEBUG_LL
- config DEBUG_LL_UART_NONE
- bool "No low-level debugging UART"
- help
- Say Y here if your platform doesn't provide a UART option
- below. This relies on your platform choosing the right UART
- definition internally in order for low-level debugging to
- work.
-
- config DEBUG_ICEDCC
- bool "Kernel low-level debugging via EmbeddedICE DCC channel"
- help
- Say Y here if you want the debug print routines to direct
- their output to the EmbeddedICE macrocell's DCC channel using
- co-processor 14. This is known to work on the ARM9 style ICE
- channel and on the XScale with the PEEDI.
-
- Note that the system will appear to hang during boot if there
- is nothing connected to read from the DCC.
-
config AT91_DEBUG_LL_DBGU0
bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
depends on HAVE_AT91_DBGU0
@@ -108,20 +89,6 @@
bool "Kernel low-level debugging on 9263, 9g45 and cap9"
depends on HAVE_AT91_DBGU1
- config DEBUG_FOOTBRIDGE_COM1
- bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
- depends on FOOTBRIDGE
- help
- Say Y here if you want the debug print routines to direct
- their output to the 8250 at PCI COM1.
-
- config DEBUG_DC21285_PORT
- bool "Kernel low-level debugging messages via footbridge serial port"
- depends on FOOTBRIDGE
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port in the DC21285 (Footbridge).
-
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
@@ -136,6 +103,20 @@
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
+ config DEBUG_DC21285_PORT
+ bool "Kernel low-level debugging messages via footbridge serial port"
+ depends on FOOTBRIDGE
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port in the DC21285 (Footbridge).
+
+ config DEBUG_FOOTBRIDGE_COM1
+ bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
+ depends on FOOTBRIDGE
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the 8250 at PCI COM1.
+
config DEBUG_HIGHBANK_UART
bool "Kernel low-level debugging messages via Highbank UART"
depends on ARCH_HIGHBANK
@@ -206,55 +187,6 @@
Say Y here if you want kernel low-level debugging support
on i.MX6Q.
- config DEBUG_S3C_UART0
- depends on PLAT_SAMSUNG
- bool "Use S3C UART 0 for low-level debug"
- help
- Say Y here if you want the debug print routines to direct
- their output to UART 0. The port must have been initialised
- by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
- config DEBUG_S3C_UART1
- depends on PLAT_SAMSUNG
- bool "Use S3C UART 1 for low-level debug"
- help
- Say Y here if you want the debug print routines to direct
- their output to UART 1. The port must have been initialised
- by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
- config DEBUG_S3C_UART2
- depends on PLAT_SAMSUNG
- bool "Use S3C UART 2 for low-level debug"
- help
- Say Y here if you want the debug print routines to direct
- their output to UART 2. The port must have been initialised
- by the boot-loader before use.
-
- The uncompressor code port configuration is now handled
- by CONFIG_S3C_LOWLEVEL_UART_PORT.
-
- config DEBUG_REALVIEW_STD_PORT
- bool "RealView Default UART"
- depends on ARCH_REALVIEW
- help
- Say Y here if you want the debug print routines to direct
- their output to the serial port on RealView EB, PB11MP, PBA8
- and PBX platforms.
-
- config DEBUG_REALVIEW_PB1176_PORT
- bool "RealView PB1176 UART"
- depends on MACH_REALVIEW_PB1176
- help
- Say Y here if you want the debug print routines to direct
- their output to the standard serial port on the RealView
- PB1176 platform.
-
config DEBUG_MSM_UART1
bool "Kernel low-level debugging messages via MSM UART1"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
@@ -292,6 +224,74 @@
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
+ config DEBUG_REALVIEW_STD_PORT
+ bool "RealView Default UART"
+ depends on ARCH_REALVIEW
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on RealView EB, PB11MP, PBA8
+ and PBX platforms.
+
+ config DEBUG_REALVIEW_PB1176_PORT
+ bool "RealView PB1176 UART"
+ depends on MACH_REALVIEW_PB1176
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the standard serial port on the RealView
+ PB1176 platform.
+
+ config DEBUG_S3C_UART0
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 0 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 0. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART1
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 1 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 1. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_S3C_UART2
+ depends on PLAT_SAMSUNG
+ bool "Use S3C UART 2 for low-level debug"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to UART 2. The port must have been initialised
+ by the boot-loader before use.
+
+ The uncompressor code port configuration is now handled
+ by CONFIG_S3C_LOWLEVEL_UART_PORT.
+
+ config DEBUG_LL_UART_NONE
+ bool "No low-level debugging UART"
+ help
+ Say Y here if your platform doesn't provide a UART option
+ below. This relies on your platform choosing the right UART
+ definition internally in order for low-level debugging to
+ work.
+
+ config DEBUG_ICEDCC
+ bool "Kernel low-level debugging via EmbeddedICE DCC channel"
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the EmbeddedICE macrocell's DCC channel using
+ co-processor 14. This is known to work on the ARM9 style ICE
+ channel and on the XScale with the PEEDI.
+
+ Note that the system will appear to hang during boot if there
+ is nothing connected to read from the DCC.
+
endchoice
config EARLY_PRINTK
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 1683bfb..a826ffc 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -180,6 +180,7 @@
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_EXYNOS4) := exynos
+machine-$(CONFIG_ARCH_EXYNOS5) := exynos
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
new file mode 100644
index 0000000..399d17b
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -0,0 +1,26 @@
+/*
+ * SAMSUNG SMDK5250 board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+ model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
+ compatible = "samsung,smdk5250", "samsung,exynos5250";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
new file mode 100644
index 0000000..dfc4335
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -0,0 +1,413 @@
+/*
+ * SAMSUNG EXYNOS5250 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
+ * EXYNOS5250 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
+ * additional nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "samsung,exynos5250";
+ interrupt-parent = <&gic>;
+
+ gic:interrupt-controller@10490000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+ };
+
+ watchdog {
+ compatible = "samsung,s3c2410-wdt";
+ reg = <0x101D0000 0x100>;
+ interrupts = <0 42 0>;
+ };
+
+ rtc {
+ compatible = "samsung,s3c6410-rtc";
+ reg = <0x101E0000 0x100>;
+ interrupts = <0 43 0>, <0 44 0>;
+ };
+
+ sdhci@12200000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12200000 0x100>;
+ interrupts = <0 75 0>;
+ };
+
+ sdhci@12210000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12210000 0x100>;
+ interrupts = <0 76 0>;
+ };
+
+ sdhci@12220000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12220000 0x100>;
+ interrupts = <0 77 0>;
+ };
+
+ sdhci@12230000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12230000 0x100>;
+ interrupts = <0 78 0>;
+ };
+
+ serial@12C00000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C00000 0x100>;
+ interrupts = <0 51 0>;
+ };
+
+ serial@12C10000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C10000 0x100>;
+ interrupts = <0 52 0>;
+ };
+
+ serial@12C20000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C20000 0x100>;
+ interrupts = <0 53 0>;
+ };
+
+ serial@12C30000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C30000 0x100>;
+ interrupts = <0 54 0>;
+ };
+
+ i2c@12C60000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C60000 0x100>;
+ interrupts = <0 56 0>;
+ };
+
+ i2c@12C70000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C70000 0x100>;
+ interrupts = <0 57 0>;
+ };
+
+ i2c@12C80000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C80000 0x100>;
+ interrupts = <0 58 0>;
+ };
+
+ i2c@12C90000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C90000 0x100>;
+ interrupts = <0 59 0>;
+ };
+
+ i2c@12CA0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CA0000 0x100>;
+ interrupts = <0 60 0>;
+ };
+
+ i2c@12CB0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CB0000 0x100>;
+ interrupts = <0 61 0>;
+ };
+
+ i2c@12CC0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CC0000 0x100>;
+ interrupts = <0 62 0>;
+ };
+
+ i2c@12CD0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CD0000 0x100>;
+ interrupts = <0 63 0>;
+ };
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ pdma0: pdma@121A0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121A0000 0x1000>;
+ interrupts = <0 34 0>;
+ };
+
+ pdma1: pdma@121B0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121B0000 0x1000>;
+ interrupts = <0 35 0>;
+ };
+
+ mdma0: pdma@10800000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x10800000 0x1000>;
+ interrupts = <0 33 0>;
+ };
+
+ mdma1: pdma@11C10000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x11C10000 0x1000>;
+ interrupts = <0 124 0>;
+ };
+ };
+
+ gpio-controllers {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ gpio-controller;
+ ranges;
+
+ gpa0: gpio-controller@11400000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400000 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpa1: gpio-controller@11400020 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400020 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpa2: gpio-controller@11400040 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400040 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpb0: gpio-controller@11400060 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400060 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpb1: gpio-controller@11400080 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400080 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpb2: gpio-controller@114000A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114000A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpb3: gpio-controller@114000C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114000C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc0: gpio-controller@114000E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114000E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc1: gpio-controller@11400100 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400100 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc2: gpio-controller@11400120 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400120 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc3: gpio-controller@11400140 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400140 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpd0: gpio-controller@11400160 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400160 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpd1: gpio-controller@11400180 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400180 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy0: gpio-controller@114001A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114001A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy1: gpio-controller@114001C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114001C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy2: gpio-controller@114001E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114001E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy3: gpio-controller@11400200 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400200 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy4: gpio-controller@11400220 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400220 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy5: gpio-controller@11400240 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400240 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy6: gpio-controller@11400260 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400260 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx0: gpio-controller@11400C00 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400C00 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx1: gpio-controller@11400C20 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400C20 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx2: gpio-controller@11400C40 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400C40 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx3: gpio-controller@11400C60 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400C60 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe0: gpio-controller@13400000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400000 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe1: gpio-controller@13400020 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400020 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpf0: gpio-controller@13400040 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400040 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpf1: gpio-controller@13400060 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400060 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpg0: gpio-controller@13400080 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400080 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpg1: gpio-controller@134000A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x134000A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpg2: gpio-controller@134000C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x134000C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gph0: gpio-controller@134000E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x134000E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gph1: gpio-controller@13400100 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400100 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpv0: gpio-controller@10D10000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x10D10000 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpv1: gpio-controller@10D10020 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x10D10020 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpv2: gpio-controller@10D10040 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x10D10040 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpv3: gpio-controller@10D10060 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x10D10060 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpv4: gpio-controller@10D10080 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x10D10080 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpz: gpio-controller@03860000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x03860000 0x20>;
+ #gpio-cells = <4>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra-cardhu.dts
index 70c41fc..0419690 100644
--- a/arch/arm/boot/dts/tegra-cardhu.dts
+++ b/arch/arm/boot/dts/tegra-cardhu.dts
@@ -14,6 +14,22 @@
clock-frequency = < 408000000 >;
};
+ serial@70006040 {
+ status = "disable";
+ };
+
+ serial@70006200 {
+ status = "disable";
+ };
+
+ serial@70006300 {
+ status = "disable";
+ };
+
+ serial@70006400 {
+ status = "disable";
+ };
+
i2c@7000c000 {
clock-frequency = <100000>;
};
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index 80afa1b..6e8447d 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -10,19 +10,25 @@
reg = < 0x00000000 0x40000000 >;
};
+ pmc@7000f400 {
+ nvidia,invert-interrupt;
+ };
+
i2c@7000c000 {
clock-frequency = <400000>;
- codec: wm8903@1a {
+ wm8903: wm8903@1a {
compatible = "wlf,wm8903";
reg = <0x1a>;
- interrupts = < 347 >;
+ interrupt-parent = <&gpio>;
+ interrupts = < 187 0x04 >;
gpio-controller;
#gpio-cells = <2>;
- /* 0x8000 = Not configured */
- gpio-cfg = < 0x8000 0x8000 0 0x8000 0x8000 >;
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
};
};
@@ -38,13 +44,32 @@
clock-frequency = <400000>;
};
- sound {
- compatible = "nvidia,harmony-sound", "nvidia,tegra-wm8903";
+ i2s@70002a00 {
+ status = "disable";
+ };
- spkr-en-gpios = <&codec 2 0>;
- hp-det-gpios = <&gpio 178 0>;
- int-mic-en-gpios = <&gpio 184 0>;
- ext-mic-en-gpios = <&gpio 185 0>;
+ sound {
+ compatible = "nvidia,tegra-audio-wm8903-harmony",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "NVIDIA Tegra Harmony";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
+ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
};
serial@70006000 {
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
index 825d295..e4b552b 100644
--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra-paz00.dts
@@ -12,6 +12,13 @@
i2c@7000c000 {
clock-frequency = <400000>;
+
+ alc5632: alc5632@1e {
+ compatible = "realtek,alc5632";
+ reg = <0x1e>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
i2c@7000c400 {
@@ -37,6 +44,29 @@
clock-frequency = <400000>;
};
+ i2s@70002a00 {
+ status = "disable";
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-alc5632-paz00",
+ "nvidia,tegra-audio-alc5632";
+
+ nvidia,model = "Compal PAZ00";
+
+ nvidia,audio-routing =
+ "Int Spk", "SPKOUT",
+ "Int Spk", "SPKOUTN",
+ "Headset Mic", "MICBIAS1",
+ "MIC1", "Headset Mic",
+ "Headset Stereophone", "HPR",
+ "Headset Stereophone", "HPL";
+
+ nvidia,audio-codec = <&alc5632>;
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ };
+
serial@70006000 {
clock-frequency = <216000000>;
};
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index b55a02e..876d5c9 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -13,6 +13,20 @@
i2c@7000c000 {
clock-frequency = <400000>;
+
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = < 187 0x04 >;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
+ };
};
i2c@7000c400 {
@@ -32,6 +46,32 @@
};
};
+ i2s@70002a00 {
+ status = "disable";
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-wm8903-seaboard",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "NVIDIA Tegra Seaboard";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1R", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */
+ };
+
serial@70006000 {
status = "disable";
};
@@ -93,4 +133,42 @@
gpio-key,wakeup;
};
};
+
+ emc@7000f400 {
+ emc-table@190000 {
+ reg = < 190000 >;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 190000 >;
+ nvidia,emc-registers = < 0x0000000c 0x00000026
+ 0x00000009 0x00000003 0x00000004 0x00000004
+ 0x00000002 0x0000000c 0x00000003 0x00000003
+ 0x00000002 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x0000059f
+ 0x00000000 0x00000003 0x00000003 0x00000003
+ 0x00000003 0x00000001 0x0000000b 0x000000c8
+ 0x00000003 0x00000007 0x00000004 0x0000000f
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xa06204ae
+ 0x007dc010 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000 >;
+ };
+
+ emc-table@380000 {
+ reg = < 380000 >;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 380000 >;
+ nvidia,emc-registers = < 0x00000017 0x0000004b
+ 0x00000012 0x00000006 0x00000004 0x00000005
+ 0x00000003 0x0000000c 0x00000006 0x00000006
+ 0x00000003 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x00000b5f
+ 0x00000000 0x00000003 0x00000003 0x00000006
+ 0x00000006 0x00000001 0x00000011 0x000000c8
+ 0x00000003 0x0000000e 0x00000007 0x0000000f
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xe044048b
+ 0x007d8010 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000 >;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra-trimslice.dts
index 3b3ee7d..2524768 100644
--- a/arch/arm/boot/dts/tegra-trimslice.dts
+++ b/arch/arm/boot/dts/tegra-trimslice.dts
@@ -26,6 +26,18 @@
status = "disable";
};
+ i2s@70002800 {
+ status = "disable";
+ };
+
+ i2s@70002a00 {
+ status = "disable";
+ };
+
+ das@70000c00 {
+ status = "disable";
+ };
+
serial@70006000 {
clock-frequency = < 216000000 >;
};
diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra-ventana.dts
index c7d3b87..2dcff87 100644
--- a/arch/arm/boot/dts/tegra-ventana.dts
+++ b/arch/arm/boot/dts/tegra-ventana.dts
@@ -12,6 +12,20 @@
i2c@7000c000 {
clock-frequency = <400000>;
+
+ wm8903: wm8903@1a {
+ compatible = "wlf,wm8903";
+ reg = <0x1a>;
+ interrupt-parent = <&gpio>;
+ interrupts = < 187 0x04 >;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ micdet-cfg = <0>;
+ micdet-delay = <100>;
+ gpio-cfg = < 0xffffffff 0xffffffff 0 0xffffffff 0xffffffff >;
+ };
};
i2c@7000c400 {
@@ -26,6 +40,34 @@
clock-frequency = <400000>;
};
+ i2s@70002a00 {
+ status = "disable";
+ };
+
+ sound {
+ compatible = "nvidia,tegra-audio-wm8903-ventana",
+ "nvidia,tegra-audio-wm8903";
+ nvidia,model = "NVIDIA Tegra Ventana";
+
+ nvidia,audio-routing =
+ "Headphone Jack", "HPOUTR",
+ "Headphone Jack", "HPOUTL",
+ "Int Spk", "ROP",
+ "Int Spk", "RON",
+ "Int Spk", "LOP",
+ "Int Spk", "LON",
+ "Mic Jack", "MICBIAS",
+ "IN1L", "Mic Jack";
+
+ nvidia,i2s-controller = <&tegra_i2s1>;
+ nvidia,audio-codec = <&wm8903>;
+
+ nvidia,spkr-en-gpios = <&wm8903 2 0>;
+ nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
+ nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
+ nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
+ };
+
serial@70006000 {
status = "disable";
};
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 3da7afd..ec1f010 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -4,6 +4,11 @@
compatible = "nvidia,tegra20";
interrupt-parent = <&intc>;
+ pmc@7000f400 {
+ compatible = "nvidia,tegra20-pmc";
+ reg = <0x7000e400 0x400>;
+ };
+
intc: interrupt-controller@50041000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
@@ -12,6 +17,27 @@
< 0x50040100 0x0100 >;
};
+ apbdma: dma@6000a000 {
+ compatible = "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1200>;
+ interrupts = < 0 104 0x04
+ 0 105 0x04
+ 0 106 0x04
+ 0 107 0x04
+ 0 108 0x04
+ 0 109 0x04
+ 0 110 0x04
+ 0 111 0x04
+ 0 112 0x04
+ 0 113 0x04
+ 0 114 0x04
+ 0 115 0x04
+ 0 116 0x04
+ 0 117 0x04
+ 0 118 0x04
+ 0 119 0x04 >;
+ };
+
i2c@7000c000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -44,18 +70,18 @@
interrupts = < 0 53 0x04 >;
};
- i2s@70002800 {
+ tegra_i2s1: i2s@70002800 {
compatible = "nvidia,tegra20-i2s";
reg = <0x70002800 0x200>;
interrupts = < 0 13 0x04 >;
- dma-channel = < 2 >;
+ nvidia,dma-request-selector = < &apbdma 2 >;
};
- i2s@70002a00 {
+ tegra_i2s2: i2s@70002a00 {
compatible = "nvidia,tegra20-i2s";
reg = <0x70002a00 0x200>;
interrupts = < 0 3 0x04 >;
- dma-channel = < 1 >;
+ nvidia,dma-request-selector = < &apbdma 1 >;
};
das@70000c00 {
@@ -75,6 +101,8 @@
0 89 0x04 >;
#gpio-cells = <2>;
gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
};
pinmux: pinmux@70000000 {
@@ -120,6 +148,13 @@
interrupts = < 0 91 0x04 >;
};
+ emc@7000f400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nvidia,tegra20-emc";
+ reg = <0x7000f400 0x200>;
+ };
+
sdhci@c8000000 {
compatible = "nvidia,tegra20-sdhci";
reg = <0xc8000000 0x200>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index ee7db98..ac4b75c 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -4,6 +4,11 @@
compatible = "nvidia,tegra30";
interrupt-parent = <&intc>;
+ pmc@7000f400 {
+ compatible = "nvidia,tegra20-pmc", "nvidia,tegra30-pmc";
+ reg = <0x7000e400 0x400>;
+ };
+
intc: interrupt-controller@50041000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
@@ -12,6 +17,43 @@
< 0x50040100 0x0100 >;
};
+ apbdma: dma@6000a000 {
+ compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma";
+ reg = <0x6000a000 0x1400>;
+ interrupts = < 0 104 0x04
+ 0 105 0x04
+ 0 106 0x04
+ 0 107 0x04
+ 0 108 0x04
+ 0 109 0x04
+ 0 110 0x04
+ 0 111 0x04
+ 0 112 0x04
+ 0 113 0x04
+ 0 114 0x04
+ 0 115 0x04
+ 0 116 0x04
+ 0 117 0x04
+ 0 118 0x04
+ 0 119 0x04
+ 0 128 0x04
+ 0 129 0x04
+ 0 130 0x04
+ 0 131 0x04
+ 0 132 0x04
+ 0 133 0x04
+ 0 134 0x04
+ 0 135 0x04
+ 0 136 0x04
+ 0 137 0x04
+ 0 138 0x04
+ 0 139 0x04
+ 0 140 0x04
+ 0 141 0x04
+ 0 142 0x04
+ 0 143 0x04 >;
+ };
+
i2c@7000c000 {
#address-cells = <1>;
#size-cells = <0>;
@@ -55,9 +97,18 @@
gpio: gpio@6000d000 {
compatible = "nvidia,tegra30-gpio", "nvidia,tegra20-gpio";
reg = < 0x6000d000 0x1000 >;
- interrupts = < 0 32 0x04 0 33 0x04 0 34 0x04 0 35 0x04 0 55 0x04 0 87 0x04 0 89 0x04 >;
+ interrupts = < 0 32 0x04
+ 0 33 0x04
+ 0 34 0x04
+ 0 35 0x04
+ 0 55 0x04
+ 0 87 0x04
+ 0 89 0x04
+ 0 125 0x04 >;
#gpio-cells = <2>;
gpio-controller;
+ #interrupt-cells = <2>;
+ interrupt-controller;
};
serial@70006000 {
diff --git a/arch/arm/include/asm/hardware/entry-macro-iomd.S b/arch/arm/include/asm/hardware/entry-macro-iomd.S
index e0af498..8c215ac 100644
--- a/arch/arm/include/asm/hardware/entry-macro-iomd.S
+++ b/arch/arm/include/asm/hardware/entry-macro-iomd.S
@@ -11,14 +11,6 @@
/* IOC / IOMD based hardware */
#include <asm/hardware/iomd.h>
- .macro disable_fiq
- mov r12, #ioc_base_high
- .if ioc_base_low
- orr r12, r12, #ioc_base_low
- .endif
- strb r12, [r12, #0x38] @ Disable FIQ register
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldrb \irqstat, [\base, #IOMD_IRQREQB] @ get high priority first
ldr \tmp, =irq_prio_h
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index e4c96cc..424aa45 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -110,6 +110,7 @@
void soft_restart(unsigned long);
extern void (*arm_pm_restart)(char str, const char *cmd);
+extern void (*arm_pm_idle)(void);
#define UDBG_UNDEFINED (1 << 0)
#define UDBG_SYSCALL (1 << 1)
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index be16a48..22f0ed3 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -19,7 +19,9 @@
#include <asm/glue-df.h>
#include <asm/glue-pf.h>
#include <asm/vfpmacros.h>
+#ifndef CONFIG_MULTI_IRQ_HANDLER
#include <mach/entry-macro.S>
+#endif
#include <asm/thread_notify.h>
#include <asm/unwind.h>
#include <asm/unistd.h>
@@ -1101,7 +1103,6 @@
* get out of that mode without clobbering one register.
*/
vector_fiq:
- disable_fiq
subs pc, lr, #4
/*=============================================================================
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 9fd0ba9..54ee265 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -10,9 +10,15 @@
#include <asm/unistd.h>
#include <asm/ftrace.h>
-#include <mach/entry-macro.S>
#include <asm/unwind.h>
+#ifdef CONFIG_NEED_RET_TO_USER
+#include <mach/entry-macro.S>
+#else
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+#endif
+
#include "entry-header.S"
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 971d65c..008e7ce 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -61,8 +61,6 @@
static volatile int hlt_counter;
-#include <mach/system.h>
-
void disable_hlt(void)
{
hlt_counter++;
@@ -181,13 +179,17 @@
EXPORT_SYMBOL_GPL(cpu_idle_wait);
/*
- * This is our default idle handler. We need to disable
- * interrupts here to ensure we don't miss a wakeup call.
+ * This is our default idle handler.
*/
+
+void (*arm_pm_idle)(void);
+
static void default_idle(void)
{
- if (!need_resched())
- arch_idle();
+ if (arm_pm_idle)
+ arm_pm_idle();
+ else
+ cpu_do_idle();
local_irq_enable();
}
@@ -215,6 +217,10 @@
cpu_die();
#endif
+ /*
+ * We need to disable interrupts here
+ * to ensure we don't miss a wakeup call.
+ */
local_irq_disable();
#ifdef CONFIG_PL310_ERRATA_769419
wmb();
@@ -222,19 +228,18 @@
if (hlt_counter) {
local_irq_enable();
cpu_relax();
- } else {
+ } else if (!need_resched()) {
stop_critical_timings();
if (cpuidle_idle_call())
pm_idle();
start_critical_timings();
/*
- * This will eventually be removed - pm_idle
- * functions should always return with IRQs
- * enabled.
+ * pm_idle functions must always
+ * return with IRQs enabled.
*/
WARN_ON(irqs_disabled());
+ } else
local_irq_enable();
- }
}
leds_event(led_idle_end);
rcu_idle_exit();
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index a42edc2..8967d75 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -14,6 +14,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -313,6 +314,12 @@
}
};
+static void at91cap9_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
/* --------------------------------------------------------------------
* AT91CAP9 processor initialization
* -------------------------------------------------------------------- */
@@ -332,6 +339,7 @@
static void __init at91cap9_initialize(void)
{
+ arm_pm_idle = at91cap9_idle;
arm_pm_restart = at91sam9g45_restart;
at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 99c3174..dd6e2de 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -289,6 +289,15 @@
}
};
+static void at91rm9200_idle(void)
+{
+ /*
+ * Disable the processor clock. The processor will be automatically
+ * re-enabled by an interrupt or by a reset.
+ */
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+}
+
static void at91rm9200_restart(char mode, const char *cmd)
{
/*
@@ -314,6 +323,7 @@
static void __init at91rm9200_initialize(void)
{
+ arm_pm_idle = at91rm9200_idle;
arm_pm_restart = at91rm9200_restart;
at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index d4036ba..9ac8c6f 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -328,8 +329,15 @@
at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
}
+static void at91sam9260_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
static void __init at91sam9260_initialize(void)
{
+ arm_pm_idle = at91sam9260_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
| (1 << AT91SAM9260_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 023c2ff..ab76868 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -286,8 +287,15 @@
at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
}
+static void at91sam9261_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
static void __init at91sam9261_initialize(void)
{
+ arm_pm_idle = at91sam9261_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
| (1 << AT91SAM9261_ID_IRQ2);
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 75e876c..247ab63 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -307,8 +308,15 @@
at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
}
+static void at91sam9263_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
static void __init at91sam9263_initialize(void)
{
+ arm_pm_idle = at91sam9263_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 1cb6a96..5b12192 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -317,6 +317,12 @@
}
};
+static void at91sam9g45_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
/* --------------------------------------------------------------------
* AT91SAM9G45 processor initialization
* -------------------------------------------------------------------- */
@@ -337,6 +343,7 @@
static void __init at91sam9g45_initialize(void)
{
+ arm_pm_idle = at91sam9g45_idle;
arm_pm_restart = at91sam9g45_restart;
at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d2c91a8..fd60e22 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
+#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -291,8 +292,15 @@
at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
}
+static void at91sam9rl_idle(void)
+{
+ at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+ cpu_do_idle();
+}
+
static void __init at91sam9rl_initialize(void)
{
+ arm_pm_idle = at91sam9rl_idle;
arm_pm_restart = at91sam9_alt_restart;
at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 56ba3bd..0154b7f 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/irq.h>
+#include <asm/proc-fns.h>
#include <asm/mach/arch.h>
#include <mach/at91x40.h>
#include <mach/at91_st.h>
@@ -37,8 +38,19 @@
return AT91X40_MASTER_CLOCK;
}
+static void at91x40_idle(void)
+{
+ /*
+ * Disable the processor clock. The processor will be automatically
+ * re-enabled by an interrupt or by a reset.
+ */
+ at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
+ cpu_do_idle();
+}
+
void __init at91x40_initialize(unsigned long main_clock)
{
+ arm_pm_idle = at91x40_idle;
at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
| (1 << AT91X40_ID_IRQ2);
}
diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S
index 423eea0..903bf20 100644
--- a/arch/arm/mach-at91/include/mach/entry-macro.S
+++ b/arch/arm/mach-at91/include/mach/entry-macro.S
@@ -13,17 +13,11 @@
#include <mach/hardware.h>
#include <mach/at91_aic.h>
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
ldr \base, =at91_aic_base @ base virtual address of AIC peripheral
ldr \base, [\base]
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number
diff --git a/arch/arm/mach-at91/include/mach/system.h b/arch/arm/mach-at91/include/mach/system.h
deleted file mode 100644
index cbd64f3..0000000
--- a/arch/arm/mach-at91/include/mach/system.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/system.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/hardware.h>
-#include <mach/at91_st.h>
-#include <mach/at91_dbgu.h>
-#include <mach/at91_pmc.h>
-
-static inline void arch_idle(void)
-{
- /*
- * Disable the processor clock. The processor will be automatically
- * re-enabled by an interrupt or by a reset.
- */
-#ifdef AT91_PS
- at91_sys_write(AT91_PS_CR, AT91_PS_CR_CPU);
-#else
- at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-#endif
-#ifndef CONFIG_CPU_ARM920T
- /*
- * Set the processor (CP15) into 'Wait for Interrupt' mode.
- * Post-RM9200 processors need this in conjunction with the above
- * to save power when idle.
- */
- cpu_do_idle();
-#endif
-}
-
-#endif
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 6b67b7e..22e4e0a 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -52,27 +52,8 @@
#include <mach/csp/chipcHw_inline.h>
#include <mach/csp/tmrHw_reg.h>
-#define AMBA_DEVICE(name, initname, base, plat, size) \
-static struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0, \
- .init_name = initname, \
- .platform_data = plat \
- }, \
- .res = { \
- .start = MM_ADDR_IO_##base, \
- .end = MM_ADDR_IO_##base + (size) - 1, \
- .flags = IORESOURCE_MEM \
- }, \
- .dma_mask = ~0, \
- .irq = { \
- IRQ_##base \
- } \
-}
-
-
-AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
-AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
+static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
+static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
static struct clk pll1_clk = {
.name = "PLL1",
diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S
index 94c950d..2f316f0 100644
--- a/arch/arm/mach-bcmring/include/mach/entry-macro.S
+++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S
@@ -21,9 +21,6 @@
#include <mach/hardware.h>
#include <mach/csp/mm_io.h>
- .macro disable_fiq
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =(MM_IO_BASE_INTC0)
ldr \irqstat, [\base, #0] @ get status
@@ -77,6 +74,3 @@
.macro get_irqnr_preamble, base, tmp
.endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-bcmring/include/mach/system.h b/arch/arm/mach-bcmring/include/mach/system.h
deleted file mode 100644
index cb78250..0000000
--- a/arch/arm/mach-bcmring/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index ab1711b..8736c1a 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -225,3 +225,19 @@
{
soft_restart(0);
}
+
+static void clps711x_idle(void)
+{
+ clps_writel(1, HALT);
+ __asm__ __volatile__(
+ "mov r0, r0\n\
+ mov r0, r0");
+}
+
+static int __init clps711x_idle_init(void)
+{
+ arm_pm_idle = clps711x_idle;
+ return 0;
+}
+
+arch_initcall(clps711x_idle_init);
diff --git a/arch/arm/mach-clps711x/include/mach/entry-macro.S b/arch/arm/mach-clps711x/include/mach/entry-macro.S
index 90fa2f7..125af59 100644
--- a/arch/arm/mach-clps711x/include/mach/entry-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/entry-macro.S
@@ -10,15 +10,9 @@
#include <mach/hardware.h>
#include <asm/hardware/clps7111.h>
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
#if (INTSR2 - INTSR1) != (INTMR2 - INTMR1)
#error INTSR stride != INTMR stride
#endif
diff --git a/arch/arm/mach-clps711x/include/mach/system.h b/arch/arm/mach-clps711x/include/mach/system.h
deleted file mode 100644
index 23d6ef8..0000000
--- a/arch/arm/mach-clps711x/include/mach/system.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/mach-clps711x/include/mach/system.h
- *
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/hardware/clps7111.h>
-
-static inline void arch_idle(void)
-{
- clps_writel(1, HALT);
- __asm__ __volatile__(
- "mov r0, r0\n\
- mov r0, r0");
-}
-
-#endif
diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
deleted file mode 100644
index 01c57df..0000000
--- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Low-level IRQ helper macros for Cavium Networks platforms
- *
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h
deleted file mode 100644
index 9e56b7d..0000000
--- a/arch/arm/mach-cns3xxx/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright 2000 Deep Blue Solutions Ltd
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S
index e14c0dc..c1661d2 100644
--- a/arch/arm/mach-davinci/include/mach/entry-macro.S
+++ b/arch/arm/mach-davinci/include/mach/entry-macro.S
@@ -11,17 +11,11 @@
#include <mach/io.h>
#include <mach/irqs.h>
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
ldr \base, =davinci_intc_base
ldr \base, [\base]
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC)
ldr \tmp, =davinci_intc_type
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
deleted file mode 100644
index fcb7a01..0000000
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * DaVinci system defines
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <mach/common.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S
index e84c78c..72d622ba 100644
--- a/arch/arm/mach-dove/include/mach/entry-macro.S
+++ b/arch/arm/mach-dove/include/mach/entry-macro.S
@@ -10,12 +10,6 @@
#include <mach/bridge-regs.h>
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
deleted file mode 100644
index 3027954..0000000
--- a/arch/arm/mach-dove/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 294aad0..804c912 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -271,8 +271,33 @@
&am79c961_device,
};
+/*
+ * EBSA110 idling methodology:
+ *
+ * We can not execute the "wait for interrupt" instruction since that
+ * will stop our MCLK signal (which provides the clock for the glue
+ * logic, and therefore the timer interrupt).
+ *
+ * Instead, we spin, polling the IRQ_STAT register for the occurrence
+ * of any interrupt with core clock down to the memory clock.
+ */
+static void ebsa110_idle(void)
+{
+ const char *irq_stat = (char *)0xff000000;
+
+ /* disable clock switching */
+ asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
+
+ /* wait for an interrupt to occur */
+ while (!*irq_stat);
+
+ /* enable clock switching */
+ asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
+}
+
static int __init ebsa110_init(void)
{
+ arm_pm_idle = ebsa110_idle;
return platform_add_devices(ebsa110_devices, ARRAY_SIZE(ebsa110_devices));
}
diff --git a/arch/arm/mach-ebsa110/include/mach/entry-macro.S b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
index cc3e599..14b110d 100644
--- a/arch/arm/mach-ebsa110/include/mach/entry-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/entry-macro.S
@@ -12,16 +12,10 @@
#define IRQ_STAT 0xff000000 /* read */
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
mov \base, #IRQ_STAT
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, stat, base, tmp
ldrb \stat, [\base] @ get interrupts
mov \irqnr, #0
diff --git a/arch/arm/mach-ebsa110/include/mach/system.h b/arch/arm/mach-ebsa110/include/mach/system.h
deleted file mode 100644
index 2e4af65..0000000
--- a/arch/arm/mach-ebsa110/include/mach/system.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * arch/arm/mach-ebsa110/include/mach/system.h
- *
- * Copyright (C) 1996-2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-/*
- * EBSA110 idling methodology:
- *
- * We can not execute the "wait for interrupt" instruction since that
- * will stop our MCLK signal (which provides the clock for the glue
- * logic, and therefore the timer interrupt).
- *
- * Instead, we spin, polling the IRQ_STAT register for the occurrence
- * of any interrupt with core clock down to the memory clock.
- */
-static inline void arch_idle(void)
-{
- const char *irq_stat = (char *)0xff000000;
-
- /* disable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c2, 2" : : : "cc");
-
- /* wait for an interrupt to occur */
- while (!*irq_stat);
-
- /* enable clock switching */
- asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
-}
-
-#endif
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index 24203f9..903edb0 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -279,48 +279,14 @@
.set_mctrl = ep93xx_uart_set_mctrl,
};
-static struct amba_device uart1_device = {
- .dev = {
- .init_name = "apb:uart1",
- .platform_data = &ep93xx_uart_data,
- },
- .res = {
- .start = EP93XX_UART1_PHYS_BASE,
- .end = EP93XX_UART1_PHYS_BASE + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_EP93XX_UART1, NO_IRQ },
- .periphid = 0x00041010,
-};
+static AMBA_APB_DEVICE(uart1, "apb:uart1", 0x00041010, EP93XX_UART1_PHYS_BASE,
+ { IRQ_EP93XX_UART1 }, &ep93xx_uart_data);
-static struct amba_device uart2_device = {
- .dev = {
- .init_name = "apb:uart2",
- .platform_data = &ep93xx_uart_data,
- },
- .res = {
- .start = EP93XX_UART2_PHYS_BASE,
- .end = EP93XX_UART2_PHYS_BASE + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_EP93XX_UART2, NO_IRQ },
- .periphid = 0x00041010,
-};
+static AMBA_APB_DEVICE(uart2, "apb:uart2", 0x00041010, EP93XX_UART2_PHYS_BASE,
+ { IRQ_EP93XX_UART2 }, &ep93xx_uart_data);
-static struct amba_device uart3_device = {
- .dev = {
- .init_name = "apb:uart3",
- .platform_data = &ep93xx_uart_data,
- },
- .res = {
- .start = EP93XX_UART3_PHYS_BASE,
- .end = EP93XX_UART3_PHYS_BASE + 0x0fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_EP93XX_UART3, NO_IRQ },
- .periphid = 0x00041010,
-};
-
+static AMBA_APB_DEVICE(uart3, "apb:uart3", 0x00041010, EP93XX_UART3_PHYS_BASE,
+ { IRQ_EP93XX_UART3 }, &ep93xx_uart_data);
static struct resource ep93xx_rtc_resource[] = {
{
diff --git a/arch/arm/mach-ep93xx/include/mach/entry-macro.S b/arch/arm/mach-ep93xx/include/mach/entry-macro.S
deleted file mode 100644
index 9be6edc..0000000
--- a/arch/arm/mach-ep93xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/entry-macro.S
- * IRQ demultiplexing for EP93xx
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-ep93xx/include/mach/system.h b/arch/arm/mach-ep93xx/include/mach/system.h
deleted file mode 100644
index b5bec7c..0000000
--- a/arch/arm/mach-ep93xx/include/mach/system.h
+++ /dev/null
@@ -1,7 +0,0 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/system.h
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 5d602f68..42f072db 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -11,18 +11,19 @@
menu "SAMSUNG EXYNOS SoCs Support"
-choice
- prompt "EXYNOS System Type"
- default ARCH_EXYNOS4
-
config ARCH_EXYNOS4
bool "SAMSUNG EXYNOS4"
+ default y
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
Samsung EXYNOS4 SoCs based systems
-endchoice
+config ARCH_EXYNOS5
+ bool "SAMSUNG EXYNOS5"
+ select HAVE_SMP
+ help
+ Samsung EXYNOS5 (Cortex-A15) SoC based systems
comment "EXYNOS SoCs"
@@ -41,6 +42,7 @@
bool "SAMSUNG EXYNOS4212"
default y
depends on ARCH_EXYNOS4
+ select SAMSUNG_DMADEV
select S5P_PM if PM
select S5P_SLEEP if PM
help
@@ -50,9 +52,17 @@
bool "SAMSUNG EXYNOS4412"
default y
depends on ARCH_EXYNOS4
+ select SAMSUNG_DMADEV
help
Enable EXYNOS4412 SoC support
+config SOC_EXYNOS5250
+ bool "SAMSUNG EXYNOS5250"
+ default y
+ depends on ARCH_EXYNOS5
+ help
+ Enable EXYNOS5250 SoC support
+
config EXYNOS4_MCT
bool
default y
@@ -333,6 +343,7 @@
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_KEYPAD
select SAMSUNG_DEV_PWM
+ select EXYNOS4_DEV_DMA
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C3
select EXYNOS4_SETUP_I2C7
@@ -351,7 +362,7 @@
Machine support for Samsung SMDK4412
endif
-comment "Flattened Device Tree based board for Exynos4 based SoC"
+comment "Flattened Device Tree based board for EXYNOS SoCs"
config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree"
@@ -365,6 +376,15 @@
Note: This is under development and not all peripherals can be supported
with this machine file.
+config MACH_EXYNOS5_DT
+ bool "SAMSUNG EXYNOS5 Machine using device tree"
+ select SOC_EXYNOS5250
+ select USE_OF
+ select ARM_AMBA
+ help
+ Machine support for Samsung Exynos4 machine with device tree enabled.
+ Select this if a fdt blob is available for the EXYNOS4 SoC based board.
+
if ARCH_EXYNOS4
comment "Configuration for HSMMC 8-bit bus width"
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 5fc202c..29967ef 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -12,7 +12,9 @@
# Core
-obj-$(CONFIG_ARCH_EXYNOS4) += common.o clock.o
+obj-$(CONFIG_ARCH_EXYNOS) += common.o
+obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o
+obj-$(CONFIG_ARCH_EXYNOS5) += clock-exynos5.o
obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
@@ -40,9 +42,11 @@
obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o
obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o
+obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o
# device support
+obj-y += dev-uart.o
obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o
@@ -51,7 +55,7 @@
obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o
obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o
-obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o
+obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
new file mode 100644
index 0000000..df54c2a
--- /dev/null
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -0,0 +1,1581 @@
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/pm.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/sysmmu.h>
+
+#include "common.h"
+#include "clock-exynos4.h"
+
+#ifdef CONFIG_PM_SLEEP
+static struct sleep_save exynos4_clock_save[] = {
+ SAVE_ITEM(EXYNOS4_CLKDIV_LEFTBUS),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_LEFTBUS),
+ SAVE_ITEM(EXYNOS4_CLKDIV_RIGHTBUS),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_RIGHTBUS),
+ SAVE_ITEM(EXYNOS4_CLKSRC_TOP0),
+ SAVE_ITEM(EXYNOS4_CLKSRC_TOP1),
+ SAVE_ITEM(EXYNOS4_CLKSRC_CAM),
+ SAVE_ITEM(EXYNOS4_CLKSRC_TV),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MFC),
+ SAVE_ITEM(EXYNOS4_CLKSRC_G3D),
+ SAVE_ITEM(EXYNOS4_CLKSRC_LCD0),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MAUDIO),
+ SAVE_ITEM(EXYNOS4_CLKSRC_FSYS),
+ SAVE_ITEM(EXYNOS4_CLKSRC_PERIL0),
+ SAVE_ITEM(EXYNOS4_CLKSRC_PERIL1),
+ SAVE_ITEM(EXYNOS4_CLKDIV_CAM),
+ SAVE_ITEM(EXYNOS4_CLKDIV_TV),
+ SAVE_ITEM(EXYNOS4_CLKDIV_MFC),
+ SAVE_ITEM(EXYNOS4_CLKDIV_G3D),
+ SAVE_ITEM(EXYNOS4_CLKDIV_LCD0),
+ SAVE_ITEM(EXYNOS4_CLKDIV_MAUDIO),
+ SAVE_ITEM(EXYNOS4_CLKDIV_FSYS0),
+ SAVE_ITEM(EXYNOS4_CLKDIV_FSYS1),
+ SAVE_ITEM(EXYNOS4_CLKDIV_FSYS2),
+ SAVE_ITEM(EXYNOS4_CLKDIV_FSYS3),
+ SAVE_ITEM(EXYNOS4_CLKDIV_PERIL0),
+ SAVE_ITEM(EXYNOS4_CLKDIV_PERIL1),
+ SAVE_ITEM(EXYNOS4_CLKDIV_PERIL2),
+ SAVE_ITEM(EXYNOS4_CLKDIV_PERIL3),
+ SAVE_ITEM(EXYNOS4_CLKDIV_PERIL4),
+ SAVE_ITEM(EXYNOS4_CLKDIV_PERIL5),
+ SAVE_ITEM(EXYNOS4_CLKDIV_TOP),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TOP),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_CAM),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_TV),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_LCD0),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_MAUDIO),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_FSYS),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL0),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_PERIL1),
+ SAVE_ITEM(EXYNOS4_CLKDIV2_RATIO),
+ SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCAM),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_CAM),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_TV),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_MFC),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_G3D),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_LCD0),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_FSYS),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_GPS),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_PERIL),
+ SAVE_ITEM(EXYNOS4_CLKGATE_BLOCK),
+ SAVE_ITEM(EXYNOS4_CLKSRC_MASK_DMC),
+ SAVE_ITEM(EXYNOS4_CLKSRC_DMC),
+ SAVE_ITEM(EXYNOS4_CLKDIV_DMC0),
+ SAVE_ITEM(EXYNOS4_CLKDIV_DMC1),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_DMC),
+ SAVE_ITEM(EXYNOS4_CLKSRC_CPU),
+ SAVE_ITEM(EXYNOS4_CLKDIV_CPU),
+ SAVE_ITEM(EXYNOS4_CLKDIV_CPU + 0x4),
+ SAVE_ITEM(EXYNOS4_CLKGATE_SCLKCPU),
+ SAVE_ITEM(EXYNOS4_CLKGATE_IP_CPU),
+};
+#endif
+
+static struct clk exynos4_clk_sclk_hdmi27m = {
+ .name = "sclk_hdmi27m",
+ .rate = 27000000,
+};
+
+static struct clk exynos4_clk_sclk_hdmiphy = {
+ .name = "sclk_hdmiphy",
+};
+
+static struct clk exynos4_clk_sclk_usbphy0 = {
+ .name = "sclk_usbphy0",
+ .rate = 27000000,
+};
+
+static struct clk exynos4_clk_sclk_usbphy1 = {
+ .name = "sclk_usbphy1",
+};
+
+static struct clk dummy_apb_pclk = {
+ .name = "apb_pclk",
+ .id = -1,
+};
+
+static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TOP, clk, enable);
+}
+
+static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_CAM, clk, enable);
+}
+
+static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_LCD0, clk, enable);
+}
+
+int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_FSYS, clk, enable);
+}
+
+static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL0, clk, enable);
+}
+
+static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_PERIL1, clk, enable);
+}
+
+static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_MFC, clk, enable);
+}
+
+static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKSRC_MASK_TV, clk, enable);
+}
+
+static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_CAM, clk, enable);
+}
+
+static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_TV, clk, enable);
+}
+
+static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_IMAGE, clk, enable);
+}
+
+static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_LCD0, clk, enable);
+}
+
+int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4210_CLKGATE_IP_LCD1, clk, enable);
+}
+
+int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_FSYS, clk, enable);
+}
+
+static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIL, clk, enable);
+}
+
+static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS4_CLKGATE_IP_PERIR, clk, enable);
+}
+
+static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
+}
+
+static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
+}
+
+/* Core list of CMU_CPU side */
+
+static struct clksrc_clk exynos4_clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_apll = {
+ .clk = {
+ .name = "sclk_apll",
+ .parent = &exynos4_clk_mout_apll.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 24, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 4, .size = 1 },
+};
+
+struct clksrc_clk exynos4_clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ },
+ .sources = &clk_src_mpll,
+
+ /* reg_src will be added in each SoCs' clock */
+};
+
+static struct clk *exynos4_clkset_moutcore_list[] = {
+ [0] = &exynos4_clk_mout_apll.clk,
+ [1] = &exynos4_clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_moutcore = {
+ .sources = exynos4_clkset_moutcore_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_moutcore_list),
+};
+
+static struct clksrc_clk exynos4_clk_moutcore = {
+ .clk = {
+ .name = "moutcore",
+ },
+ .sources = &exynos4_clkset_moutcore,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk exynos4_clk_coreclk = {
+ .clk = {
+ .name = "core_clk",
+ .parent = &exynos4_clk_moutcore.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_armclk = {
+ .clk = {
+ .name = "armclk",
+ .parent = &exynos4_clk_coreclk.clk,
+ },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_corem0 = {
+ .clk = {
+ .name = "aclk_corem0",
+ .parent = &exynos4_clk_coreclk.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_cores = {
+ .clk = {
+ .name = "aclk_cores",
+ .parent = &exynos4_clk_coreclk.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 4, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_corem1 = {
+ .clk = {
+ .name = "aclk_corem1",
+ .parent = &exynos4_clk_coreclk.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_periphclk = {
+ .clk = {
+ .name = "periphclk",
+ .parent = &exynos4_clk_coreclk.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CPU, .shift = 12, .size = 3 },
+};
+
+/* Core list of CMU_CORE side */
+
+static struct clk *exynos4_clkset_corebus_list[] = {
+ [0] = &exynos4_clk_mout_mpll.clk,
+ [1] = &exynos4_clk_sclk_apll.clk,
+};
+
+struct clksrc_sources exynos4_clkset_mout_corebus = {
+ .sources = exynos4_clkset_corebus_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_corebus_list),
+};
+
+static struct clksrc_clk exynos4_clk_mout_corebus = {
+ .clk = {
+ .name = "mout_corebus",
+ },
+ .sources = &exynos4_clkset_mout_corebus,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_DMC, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_dmc = {
+ .clk = {
+ .name = "sclk_dmc",
+ .parent = &exynos4_clk_mout_corebus.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_cored = {
+ .clk = {
+ .name = "aclk_cored",
+ .parent = &exynos4_clk_sclk_dmc.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_corep = {
+ .clk = {
+ .name = "aclk_corep",
+ .parent = &exynos4_clk_aclk_cored.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 20, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_acp = {
+ .clk = {
+ .name = "aclk_acp",
+ .parent = &exynos4_clk_mout_corebus.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_pclk_acp = {
+ .clk = {
+ .name = "pclk_acp",
+ .parent = &exynos4_clk_aclk_acp.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_DMC0, .shift = 4, .size = 3 },
+};
+
+/* Core list of CMU_TOP side */
+
+struct clk *exynos4_clkset_aclk_top_list[] = {
+ [0] = &exynos4_clk_mout_mpll.clk,
+ [1] = &exynos4_clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_aclk = {
+ .sources = exynos4_clkset_aclk_top_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_aclk_top_list),
+};
+
+static struct clksrc_clk exynos4_clk_aclk_200 = {
+ .clk = {
+ .name = "aclk_200",
+ },
+ .sources = &exynos4_clkset_aclk,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 12, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_100 = {
+ .clk = {
+ .name = "aclk_100",
+ },
+ .sources = &exynos4_clkset_aclk,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 16, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_aclk_160 = {
+ .clk = {
+ .name = "aclk_160",
+ },
+ .sources = &exynos4_clkset_aclk,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 20, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 8, .size = 3 },
+};
+
+struct clksrc_clk exynos4_clk_aclk_133 = {
+ .clk = {
+ .name = "aclk_133",
+ },
+ .sources = &exynos4_clkset_aclk,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 24, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_TOP, .shift = 12, .size = 3 },
+};
+
+static struct clk *exynos4_clkset_vpllsrc_list[] = {
+ [0] = &clk_fin_vpll,
+ [1] = &exynos4_clk_sclk_hdmi27m,
+};
+
+static struct clksrc_sources exynos4_clkset_vpllsrc = {
+ .sources = exynos4_clkset_vpllsrc_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_vpllsrc_list),
+};
+
+static struct clksrc_clk exynos4_clk_vpllsrc = {
+ .clk = {
+ .name = "vpll_src",
+ .enable = exynos4_clksrc_mask_top_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos4_clkset_vpllsrc,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TOP1, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos4_clkset_sclk_vpll_list[] = {
+ [0] = &exynos4_clk_vpllsrc.clk,
+ [1] = &clk_fout_vpll,
+};
+
+static struct clksrc_sources exynos4_clkset_sclk_vpll = {
+ .sources = exynos4_clkset_sclk_vpll_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_vpll_list),
+};
+
+static struct clksrc_clk exynos4_clk_sclk_vpll = {
+ .clk = {
+ .name = "sclk_vpll",
+ },
+ .sources = &exynos4_clkset_sclk_vpll,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TOP0, .shift = 8, .size = 1 },
+};
+
+static struct clk exynos4_init_clocks_off[] = {
+ {
+ .name = "timers",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1<<24),
+ }, {
+ .name = "csis",
+ .devname = "s5p-mipi-csis.0",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "csis",
+ .devname = "s5p-mipi-csis.1",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "jpeg",
+ .id = 0,
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "fimc",
+ .devname = "exynos4-fimc.0",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "fimc",
+ .devname = "exynos4-fimc.1",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "fimc",
+ .devname = "exynos4-fimc.2",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "fimc",
+ .devname = "exynos4-fimc.3",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &exynos4_clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &exynos4_clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &exynos4_clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &exynos4_clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "dwmmc",
+ .parent = &exynos4_clk_aclk_133.clk,
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "dac",
+ .devname = "s5p-sdo",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "mixer",
+ .devname = "s5p-mixer",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "vp",
+ .devname = "s5p-mixer",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "hdmi",
+ .devname = "exynos4-hdmi",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "hdmiphy",
+ .devname = "exynos4-hdmi",
+ .enable = exynos4_clk_hdmiphy_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "dacphy",
+ .devname = "s5p-sdo",
+ .enable = exynos4_clk_dac_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "adc",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "keypad",
+ .enable = exynos4_clk_ip_perir_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "rtc",
+ .enable = exynos4_clk_ip_perir_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "watchdog",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_perir_ctrl,
+ .ctrlbit = (1 << 14),
+ }, {
+ .name = "usbhost",
+ .enable = exynos4_clk_ip_fsys_ctrl ,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "otg",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.0",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.1",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 17),
+ }, {
+ .name = "spi",
+ .devname = "s3c64xx-spi.2",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 18),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.0",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 19),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.1",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 20),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.2",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 21),
+ }, {
+ .name = "ac97",
+ .devname = "samsung-ac97",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 27),
+ }, {
+ .name = "fimg2d",
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "mfc",
+ .devname = "s5p-mfc",
+ .enable = exynos4_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.0",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.1",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.2",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.3",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.4",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.5",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.6",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.7",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-hdmiphy-i2c",
+ .parent = &exynos4_clk_aclk_100.clk,
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 14),
+ }, {
+ .name = "SYSMMU_MDMA",
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "SYSMMU_FIMC0",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "SYSMMU_FIMC1",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "SYSMMU_FIMC2",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "SYSMMU_FIMC3",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "SYSMMU_JPEG",
+ .enable = exynos4_clk_ip_cam_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "SYSMMU_FIMD0",
+ .enable = exynos4_clk_ip_lcd0_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "SYSMMU_FIMD1",
+ .enable = exynos4_clk_ip_lcd1_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "SYSMMU_PCIe",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 18),
+ }, {
+ .name = "SYSMMU_G2D",
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "SYSMMU_ROTATOR",
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "SYSMMU_TV",
+ .enable = exynos4_clk_ip_tv_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "SYSMMU_MFC_L",
+ .enable = exynos4_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "SYSMMU_MFC_R",
+ .enable = exynos4_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 2),
+ }
+};
+
+static struct clk exynos4_init_clocks_on[] = {
+ {
+ .name = "uart",
+ .devname = "s5pv210-uart.0",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.1",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.2",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.3",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.4",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.5",
+ .enable = exynos4_clk_ip_peril_ctrl,
+ .ctrlbit = (1 << 5),
+ }
+};
+
+static struct clk exynos4_clk_pdma0 = {
+ .name = "dma",
+ .devname = "dma-pl330.0",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+};
+
+static struct clk exynos4_clk_pdma1 = {
+ .name = "dma",
+ .devname = "dma-pl330.1",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 1),
+};
+
+static struct clk exynos4_clk_mdma1 = {
+ .name = "dma",
+ .devname = "dma-pl330.2",
+ .enable = exynos4_clk_ip_image_ctrl,
+ .ctrlbit = ((1 << 8) | (1 << 5) | (1 << 2)),
+};
+
+static struct clk exynos4_clk_fimd0 = {
+ .name = "fimd",
+ .devname = "exynos4-fb.0",
+ .enable = exynos4_clk_ip_lcd0_ctrl,
+ .ctrlbit = (1 << 0),
+};
+
+struct clk *exynos4_clkset_group_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = &clk_xusbxti,
+ [2] = &exynos4_clk_sclk_hdmi27m,
+ [3] = &exynos4_clk_sclk_usbphy0,
+ [4] = &exynos4_clk_sclk_usbphy1,
+ [5] = &exynos4_clk_sclk_hdmiphy,
+ [6] = &exynos4_clk_mout_mpll.clk,
+ [7] = &exynos4_clk_mout_epll.clk,
+ [8] = &exynos4_clk_sclk_vpll.clk,
+};
+
+struct clksrc_sources exynos4_clkset_group = {
+ .sources = exynos4_clkset_group_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_group_list),
+};
+
+static struct clk *exynos4_clkset_mout_g2d0_list[] = {
+ [0] = &exynos4_clk_mout_mpll.clk,
+ [1] = &exynos4_clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_mout_g2d0 = {
+ .sources = exynos4_clkset_mout_g2d0_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d0_list),
+};
+
+static struct clksrc_clk exynos4_clk_mout_g2d0 = {
+ .clk = {
+ .name = "mout_g2d0",
+ },
+ .sources = &exynos4_clkset_mout_g2d0,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos4_clkset_mout_g2d1_list[] = {
+ [0] = &exynos4_clk_mout_epll.clk,
+ [1] = &exynos4_clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_mout_g2d1 = {
+ .sources = exynos4_clkset_mout_g2d1_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d1_list),
+};
+
+static struct clksrc_clk exynos4_clk_mout_g2d1 = {
+ .clk = {
+ .name = "mout_g2d1",
+ },
+ .sources = &exynos4_clkset_mout_g2d1,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 4, .size = 1 },
+};
+
+static struct clk *exynos4_clkset_mout_g2d_list[] = {
+ [0] = &exynos4_clk_mout_g2d0.clk,
+ [1] = &exynos4_clk_mout_g2d1.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_mout_g2d = {
+ .sources = exynos4_clkset_mout_g2d_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_g2d_list),
+};
+
+static struct clk *exynos4_clkset_mout_mfc0_list[] = {
+ [0] = &exynos4_clk_mout_mpll.clk,
+ [1] = &exynos4_clk_sclk_apll.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_mout_mfc0 = {
+ .sources = exynos4_clkset_mout_mfc0_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc0_list),
+};
+
+static struct clksrc_clk exynos4_clk_mout_mfc0 = {
+ .clk = {
+ .name = "mout_mfc0",
+ },
+ .sources = &exynos4_clkset_mout_mfc0,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos4_clkset_mout_mfc1_list[] = {
+ [0] = &exynos4_clk_mout_epll.clk,
+ [1] = &exynos4_clk_sclk_vpll.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_mout_mfc1 = {
+ .sources = exynos4_clkset_mout_mfc1_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc1_list),
+};
+
+static struct clksrc_clk exynos4_clk_mout_mfc1 = {
+ .clk = {
+ .name = "mout_mfc1",
+ },
+ .sources = &exynos4_clkset_mout_mfc1,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 4, .size = 1 },
+};
+
+static struct clk *exynos4_clkset_mout_mfc_list[] = {
+ [0] = &exynos4_clk_mout_mfc0.clk,
+ [1] = &exynos4_clk_mout_mfc1.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_mout_mfc = {
+ .sources = exynos4_clkset_mout_mfc_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_mout_mfc_list),
+};
+
+static struct clk *exynos4_clkset_sclk_dac_list[] = {
+ [0] = &exynos4_clk_sclk_vpll.clk,
+ [1] = &exynos4_clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources exynos4_clkset_sclk_dac = {
+ .sources = exynos4_clkset_sclk_dac_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_dac_list),
+};
+
+static struct clksrc_clk exynos4_clk_sclk_dac = {
+ .clk = {
+ .name = "sclk_dac",
+ .enable = exynos4_clksrc_mask_tv_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &exynos4_clkset_sclk_dac,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_pixel = {
+ .clk = {
+ .name = "sclk_pixel",
+ .parent = &exynos4_clk_sclk_vpll.clk,
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_TV, .shift = 0, .size = 4 },
+};
+
+static struct clk *exynos4_clkset_sclk_hdmi_list[] = {
+ [0] = &exynos4_clk_sclk_pixel.clk,
+ [1] = &exynos4_clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources exynos4_clkset_sclk_hdmi = {
+ .sources = exynos4_clkset_sclk_hdmi_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk exynos4_clk_sclk_hdmi = {
+ .clk = {
+ .name = "sclk_hdmi",
+ .enable = exynos4_clksrc_mask_tv_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos4_clkset_sclk_hdmi,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos4_clkset_sclk_mixer_list[] = {
+ [0] = &exynos4_clk_sclk_dac.clk,
+ [1] = &exynos4_clk_sclk_hdmi.clk,
+};
+
+static struct clksrc_sources exynos4_clkset_sclk_mixer = {
+ .sources = exynos4_clkset_sclk_mixer_list,
+ .nr_sources = ARRAY_SIZE(exynos4_clkset_sclk_mixer_list),
+};
+
+static struct clksrc_clk exynos4_clk_sclk_mixer = {
+ .clk = {
+ .name = "sclk_mixer",
+ .enable = exynos4_clksrc_mask_tv_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &exynos4_clkset_sclk_mixer,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_TV, .shift = 4, .size = 1 },
+};
+
+static struct clksrc_clk *exynos4_sclk_tv[] = {
+ &exynos4_clk_sclk_dac,
+ &exynos4_clk_sclk_pixel,
+ &exynos4_clk_sclk_hdmi,
+ &exynos4_clk_sclk_mixer,
+};
+
+static struct clksrc_clk exynos4_clk_dout_mmc0 = {
+ .clk = {
+ .name = "dout_mmc0",
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_dout_mmc1 = {
+ .clk = {
+ .name = "dout_mmc1",
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 4, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_dout_mmc2 = {
+ .clk = {
+ .name = "dout_mmc2",
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 8, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_dout_mmc3 = {
+ .clk = {
+ .name = "dout_mmc3",
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 12, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_dout_mmc4 = {
+ .clk = {
+ .name = "dout_mmc4",
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 16, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clksrcs[] = {
+ {
+ .clk = {
+ .name = "sclk_pwm",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 24, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL3, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_csis",
+ .devname = "s5p-mipi-csis.0",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 24, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 24, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_csis",
+ .devname = "s5p-mipi-csis.1",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 28),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 28, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 28, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam0",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 16, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam1",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 20, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .devname = "exynos4-fimc.0",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .devname = "exynos4-fimc.1",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 4, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 4, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .devname = "exynos4-fimc.2",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 8, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 8, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimc",
+ .devname = "exynos4-fimc.3",
+ .enable = exynos4_clksrc_mask_cam_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CAM, .shift = 12, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_CAM, .shift = 12, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .devname = "exynos4-fb.0",
+ .enable = exynos4_clksrc_mask_lcd0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_LCD0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_LCD0, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_fimg2d",
+ },
+ .sources = &exynos4_clkset_mout_g2d,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_IMAGE, .shift = 8, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_IMAGE, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_mfc",
+ .devname = "s5p-mfc",
+ },
+ .sources = &exynos4_clkset_mout_mfc,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_MFC, .shift = 8, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_MFC, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_dwmmc",
+ .parent = &exynos4_clk_dout_mmc4.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS3, .shift = 8, .size = 8 },
+ }
+};
+
+static struct clksrc_clk exynos4_clk_sclk_uart0 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.0",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_uart1 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.1",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 4, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_uart2 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.2",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 8, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_uart3 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.3",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL0, .shift = 12, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL0, .shift = 12, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &exynos4_clk_dout_mmc0.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &exynos4_clk_dout_mmc1.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS1, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &exynos4_clk_dout_mmc2.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &exynos4_clk_dout_mmc3.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .enable = exynos4_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .enable = exynos4_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos4_clk_sclk_spi2 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.2",
+ .enable = exynos4_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 },
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *exynos4_sysclks[] = {
+ &exynos4_clk_mout_apll,
+ &exynos4_clk_sclk_apll,
+ &exynos4_clk_mout_epll,
+ &exynos4_clk_mout_mpll,
+ &exynos4_clk_moutcore,
+ &exynos4_clk_coreclk,
+ &exynos4_clk_armclk,
+ &exynos4_clk_aclk_corem0,
+ &exynos4_clk_aclk_cores,
+ &exynos4_clk_aclk_corem1,
+ &exynos4_clk_periphclk,
+ &exynos4_clk_mout_corebus,
+ &exynos4_clk_sclk_dmc,
+ &exynos4_clk_aclk_cored,
+ &exynos4_clk_aclk_corep,
+ &exynos4_clk_aclk_acp,
+ &exynos4_clk_pclk_acp,
+ &exynos4_clk_vpllsrc,
+ &exynos4_clk_sclk_vpll,
+ &exynos4_clk_aclk_200,
+ &exynos4_clk_aclk_100,
+ &exynos4_clk_aclk_160,
+ &exynos4_clk_aclk_133,
+ &exynos4_clk_dout_mmc0,
+ &exynos4_clk_dout_mmc1,
+ &exynos4_clk_dout_mmc2,
+ &exynos4_clk_dout_mmc3,
+ &exynos4_clk_dout_mmc4,
+ &exynos4_clk_mout_mfc0,
+ &exynos4_clk_mout_mfc1,
+};
+
+static struct clk *exynos4_clk_cdev[] = {
+ &exynos4_clk_pdma0,
+ &exynos4_clk_pdma1,
+ &exynos4_clk_mdma1,
+ &exynos4_clk_fimd0,
+};
+
+static struct clksrc_clk *exynos4_clksrc_cdev[] = {
+ &exynos4_clk_sclk_uart0,
+ &exynos4_clk_sclk_uart1,
+ &exynos4_clk_sclk_uart2,
+ &exynos4_clk_sclk_uart3,
+ &exynos4_clk_sclk_mmc0,
+ &exynos4_clk_sclk_mmc1,
+ &exynos4_clk_sclk_mmc2,
+ &exynos4_clk_sclk_mmc3,
+ &exynos4_clk_sclk_spi0,
+ &exynos4_clk_sclk_spi1,
+ &exynos4_clk_sclk_spi2,
+
+};
+
+static struct clk_lookup exynos4_clk_lookup[] = {
+ CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos4_clk_sclk_uart0.clk),
+ CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
+ CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
+ CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
+ CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
+ CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0),
+ CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
+ CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
+ CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk),
+ CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk),
+};
+
+static int xtal_rate;
+
+static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
+{
+ if (soc_is_exynos4210())
+ return s5p_get_pll45xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0),
+ pll_4508);
+ else if (soc_is_exynos4212() || soc_is_exynos4412())
+ return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS4_APLL_CON0));
+ else
+ return 0;
+}
+
+static struct clk_ops exynos4_fout_apll_ops = {
+ .get_rate = exynos4_fout_apll_get_rate,
+};
+
+static u32 exynos4_vpll_div[][8] = {
+ { 54000000, 3, 53, 3, 1024, 0, 17, 0 },
+ { 108000000, 3, 53, 2, 1024, 0, 17, 0 },
+};
+
+static unsigned long exynos4_vpll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int vpll_con0, vpll_con1 = 0;
+ unsigned int i;
+
+ /* Return if nothing changed */
+ if (clk->rate == rate)
+ return 0;
+
+ vpll_con0 = __raw_readl(EXYNOS4_VPLL_CON0);
+ vpll_con0 &= ~(0x1 << 27 | \
+ PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
+ PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
+ PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+ vpll_con1 = __raw_readl(EXYNOS4_VPLL_CON1);
+ vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \
+ PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \
+ PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(exynos4_vpll_div); i++) {
+ if (exynos4_vpll_div[i][0] == rate) {
+ vpll_con0 |= exynos4_vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
+ vpll_con0 |= exynos4_vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
+ vpll_con0 |= exynos4_vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
+ vpll_con1 |= exynos4_vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
+ vpll_con1 |= exynos4_vpll_div[i][5] << PLL46XX_MFR_SHIFT;
+ vpll_con1 |= exynos4_vpll_div[i][6] << PLL46XX_MRR_SHIFT;
+ vpll_con0 |= exynos4_vpll_div[i][7] << 27;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(exynos4_vpll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ __raw_writel(vpll_con0, EXYNOS4_VPLL_CON0);
+ __raw_writel(vpll_con1, EXYNOS4_VPLL_CON1);
+
+ /* Wait for VPLL lock */
+ while (!(__raw_readl(EXYNOS4_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
+ continue;
+
+ clk->rate = rate;
+ return 0;
+}
+
+static struct clk_ops exynos4_vpll_ops = {
+ .get_rate = exynos4_vpll_get_rate,
+ .set_rate = exynos4_vpll_set_rate,
+};
+
+void __init_or_cpufreq exynos4_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long apll = 0;
+ unsigned long mpll = 0;
+ unsigned long epll = 0;
+ unsigned long vpll = 0;
+ unsigned long vpllsrc;
+ unsigned long xtal;
+ unsigned long armclk;
+ unsigned long sclk_dmc;
+ unsigned long aclk_200;
+ unsigned long aclk_100;
+ unsigned long aclk_160;
+ unsigned long aclk_133;
+ unsigned int ptr;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ xtal_clk = clk_get(NULL, "xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+
+ xtal_rate = xtal;
+
+ clk_put(xtal_clk);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ if (soc_is_exynos4210()) {
+ apll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_APLL_CON0),
+ pll_4508);
+ mpll = s5p_get_pll45xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0),
+ pll_4508);
+ epll = s5p_get_pll46xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0),
+ __raw_readl(EXYNOS4_EPLL_CON1), pll_4600);
+
+ vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk);
+ vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0),
+ __raw_readl(EXYNOS4_VPLL_CON1), pll_4650c);
+ } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+ apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_APLL_CON0));
+ mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS4_MPLL_CON0));
+ epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS4_EPLL_CON0),
+ __raw_readl(EXYNOS4_EPLL_CON1));
+
+ vpllsrc = clk_get_rate(&exynos4_clk_vpllsrc.clk);
+ vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS4_VPLL_CON0),
+ __raw_readl(EXYNOS4_VPLL_CON1));
+ } else {
+ /* nothing */
+ }
+
+ clk_fout_apll.ops = &exynos4_fout_apll_ops;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_fout_vpll.ops = &exynos4_vpll_ops;
+ clk_fout_vpll.rate = vpll;
+
+ printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
+ apll, mpll, epll, vpll);
+
+ armclk = clk_get_rate(&exynos4_clk_armclk.clk);
+ sclk_dmc = clk_get_rate(&exynos4_clk_sclk_dmc.clk);
+
+ aclk_200 = clk_get_rate(&exynos4_clk_aclk_200.clk);
+ aclk_100 = clk_get_rate(&exynos4_clk_aclk_100.clk);
+ aclk_160 = clk_get_rate(&exynos4_clk_aclk_160.clk);
+ aclk_133 = clk_get_rate(&exynos4_clk_aclk_133.clk);
+
+ printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n"
+ "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n",
+ armclk, sclk_dmc, aclk_200,
+ aclk_100, aclk_160, aclk_133);
+
+ clk_f.rate = armclk;
+ clk_h.rate = sclk_dmc;
+ clk_p.rate = aclk_100;
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrcs); ptr++)
+ s3c_set_clksrc(&exynos4_clksrcs[ptr], true);
+}
+
+static struct clk *exynos4_clks[] __initdata = {
+ &exynos4_clk_sclk_hdmi27m,
+ &exynos4_clk_sclk_hdmiphy,
+ &exynos4_clk_sclk_usbphy0,
+ &exynos4_clk_sclk_usbphy1,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+ return 0;
+}
+
+static void exynos4_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+}
+
+#else
+#define exynos4_clock_suspend NULL
+#define exynos4_clock_resume NULL
+#endif
+
+static struct syscore_ops exynos4_clock_syscore_ops = {
+ .suspend = exynos4_clock_suspend,
+ .resume = exynos4_clock_resume,
+};
+
+void __init exynos4_register_clocks(void)
+{
+ int ptr;
+
+ s3c24xx_register_clocks(exynos4_clks, ARRAY_SIZE(exynos4_clks));
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sysclks); ptr++)
+ s3c_register_clksrc(exynos4_sysclks[ptr], 1);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos4_sclk_tv); ptr++)
+ s3c_register_clksrc(exynos4_sclk_tv[ptr], 1);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clksrc_cdev); ptr++)
+ s3c_register_clksrc(exynos4_clksrc_cdev[ptr], 1);
+
+ s3c_register_clksrc(exynos4_clksrcs, ARRAY_SIZE(exynos4_clksrcs));
+ s3c_register_clocks(exynos4_init_clocks_on, ARRAY_SIZE(exynos4_init_clocks_on));
+
+ s3c24xx_register_clocks(exynos4_clk_cdev, ARRAY_SIZE(exynos4_clk_cdev));
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos4_clk_cdev); ptr++)
+ s3c_disable_clocks(exynos4_clk_cdev[ptr], 1);
+
+ s3c_register_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off));
+ s3c_disable_clocks(exynos4_init_clocks_off, ARRAY_SIZE(exynos4_init_clocks_off));
+ clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup));
+
+ register_syscore_ops(&exynos4_clock_syscore_ops);
+ s3c24xx_register_clock(&dummy_apb_pclk);
+
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-exynos/clock-exynos4.h b/arch/arm/mach-exynos/clock-exynos4.h
new file mode 100644
index 0000000..cb71c29
--- /dev/null
+++ b/arch/arm/mach-exynos/clock-exynos4.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Header file for exynos4 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clksrc_clk exynos4_clk_aclk_133;
+extern struct clksrc_clk exynos4_clk_mout_mpll;
+
+extern struct clksrc_sources exynos4_clkset_mout_corebus;
+extern struct clksrc_sources exynos4_clkset_group;
+
+extern struct clk *exynos4_clkset_aclk_top_list[];
+extern struct clk *exynos4_clkset_group_list[];
+
+extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
index 13312cc..3b131e4 100644
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
@@ -1,7 +1,5 @@
/*
- * linux/arch/arm/mach-exynos4/clock-exynos4210.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4210 - Clock support
@@ -28,20 +26,20 @@
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/exynos4-clock.h>
#include "common.h"
+#include "clock-exynos4.h"
#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4210_clock_save[] = {
- SAVE_ITEM(S5P_CLKSRC_IMAGE),
- SAVE_ITEM(S5P_CLKSRC_LCD1),
- SAVE_ITEM(S5P_CLKDIV_IMAGE),
- SAVE_ITEM(S5P_CLKDIV_LCD1),
- SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
- SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210),
- SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
+ SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
+ SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
+ SAVE_ITEM(EXYNOS4210_CLKSRC_LCD1),
+ SAVE_ITEM(EXYNOS4210_CLKDIV_LCD1),
+ SAVE_ITEM(EXYNOS4210_CLKSRC_MASK_LCD1),
+ SAVE_ITEM(EXYNOS4210_CLKGATE_IP_IMAGE),
+ SAVE_ITEM(EXYNOS4210_CLKGATE_IP_LCD1),
+ SAVE_ITEM(EXYNOS4210_CLKGATE_IP_PERIR),
};
#endif
@@ -51,7 +49,7 @@
static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
{
- return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
+ return s5p_gatectrl(EXYNOS4210_CLKSRC_MASK_LCD1, clk, enable);
}
static struct clksrc_clk clksrcs[] = {
@@ -62,9 +60,9 @@
.enable = exynos4_clksrc_mask_fsys_ctrl,
.ctrlbit = (1 << 24),
},
- .sources = &clkset_mout_corebus,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
+ .sources = &exynos4_clkset_mout_corebus,
+ .reg_src = { .reg = EXYNOS4_CLKSRC_FSYS, .shift = 24, .size = 1 },
+ .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS0, .shift = 20, .size = 4 },
}, {
.clk = {
.name = "sclk_fimd",
@@ -72,9 +70,9 @@
.enable = exynos4_clksrc_mask_lcd1_ctrl,
.ctrlbit = (1 << 0),
},
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
+ .sources = &exynos4_clkset_group,
+ .reg_src = { .reg = EXYNOS4210_CLKSRC_LCD1, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS4210_CLKDIV_LCD1, .shift = 0, .size = 4 },
},
};
@@ -82,13 +80,13 @@
{
.name = "sataphy",
.id = -1,
- .parent = &clk_aclk_133.clk,
+ .parent = &exynos4_clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 3),
}, {
.name = "sata",
.id = -1,
- .parent = &clk_aclk_133.clk,
+ .parent = &exynos4_clk_aclk_133.clk,
.enable = exynos4_clk_ip_fsys_ctrl,
.ctrlbit = (1 << 10),
}, {
@@ -117,7 +115,7 @@
#define exynos4210_clock_resume NULL
#endif
-struct syscore_ops exynos4210_clock_syscore_ops = {
+static struct syscore_ops exynos4210_clock_syscore_ops = {
.suspend = exynos4210_clock_suspend,
.resume = exynos4210_clock_resume,
};
@@ -126,9 +124,9 @@
{
int ptr;
- clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU;
- clk_mout_mpll.reg_src.shift = 8;
- clk_mout_mpll.reg_src.size = 1;
+ exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_CPU;
+ exynos4_clk_mout_mpll.reg_src.shift = 8;
+ exynos4_clk_mout_mpll.reg_src.size = 1;
for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
s3c_register_clksrc(sysclks[ptr], 1);
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
index 48af285..3ecc01e 100644
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@@ -1,7 +1,5 @@
/*
- * linux/arch/arm/mach-exynos4/clock-exynos4212.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4212 - Clock support
@@ -28,22 +26,22 @@
#include <mach/hardware.h>
#include <mach/map.h>
#include <mach/regs-clock.h>
-#include <mach/exynos4-clock.h>
#include "common.h"
+#include "clock-exynos4.h"
#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4212_clock_save[] = {
- SAVE_ITEM(S5P_CLKSRC_IMAGE),
- SAVE_ITEM(S5P_CLKDIV_IMAGE),
- SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
+ SAVE_ITEM(EXYNOS4_CLKSRC_IMAGE),
+ SAVE_ITEM(EXYNOS4_CLKDIV_IMAGE),
+ SAVE_ITEM(EXYNOS4212_CLKGATE_IP_IMAGE),
+ SAVE_ITEM(EXYNOS4212_CLKGATE_IP_PERIR),
};
#endif
static struct clk *clk_src_mpll_user_list[] = {
[0] = &clk_fin_mpll,
- [1] = &clk_mout_mpll.clk,
+ [1] = &exynos4_clk_mout_mpll.clk,
};
static struct clksrc_sources clk_src_mpll_user = {
@@ -56,7 +54,7 @@
.name = "mout_mpll_user",
},
.sources = &clk_src_mpll_user,
- .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 },
+ .reg_src = { .reg = EXYNOS4_CLKSRC_CPU, .shift = 24, .size = 1 },
};
static struct clksrc_clk *sysclks[] = {
@@ -89,7 +87,7 @@
#define exynos4212_clock_resume NULL
#endif
-struct syscore_ops exynos4212_clock_syscore_ops = {
+static struct syscore_ops exynos4212_clock_syscore_ops = {
.suspend = exynos4212_clock_suspend,
.resume = exynos4212_clock_resume,
};
@@ -99,15 +97,15 @@
int ptr;
/* usbphy1 is removed */
- clkset_group_list[4] = NULL;
+ exynos4_clkset_group_list[4] = NULL;
/* mout_mpll_user is used */
- clkset_group_list[6] = &clk_mout_mpll_user.clk;
- clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
+ exynos4_clkset_group_list[6] = &clk_mout_mpll_user.clk;
+ exynos4_clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
- clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC;
- clk_mout_mpll.reg_src.shift = 12;
- clk_mout_mpll.reg_src.size = 1;
+ exynos4_clk_mout_mpll.reg_src.reg = EXYNOS4_CLKSRC_DMC;
+ exynos4_clk_mout_mpll.reg_src.shift = 12;
+ exynos4_clk_mout_mpll.reg_src.size = 1;
for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
s3c_register_clksrc(sysclks[ptr], 1);
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
new file mode 100644
index 0000000..d013982
--- /dev/null
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -0,0 +1,1247 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Clock support for EXYNOS5 SoCs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/pm.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/sysmmu.h>
+
+#include "common.h"
+
+#ifdef CONFIG_PM_SLEEP
+static struct sleep_save exynos5_clock_save[] = {
+ /* will be implemented */
+};
+#endif
+
+static struct clk exynos5_clk_sclk_dptxphy = {
+ .name = "sclk_dptx",
+};
+
+static struct clk exynos5_clk_sclk_hdmi24m = {
+ .name = "sclk_hdmi24m",
+ .rate = 24000000,
+};
+
+static struct clk exynos5_clk_sclk_hdmi27m = {
+ .name = "sclk_hdmi27m",
+ .rate = 27000000,
+};
+
+static struct clk exynos5_clk_sclk_hdmiphy = {
+ .name = "sclk_hdmiphy",
+};
+
+static struct clk exynos5_clk_sclk_usbphy = {
+ .name = "sclk_usbphy",
+ .rate = 48000000,
+};
+
+static int exynos5_clksrc_mask_top_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_TOP, clk, enable);
+}
+
+static int exynos5_clksrc_mask_disp1_0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_DISP1_0, clk, enable);
+}
+
+static int exynos5_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_FSYS, clk, enable);
+}
+
+static int exynos5_clksrc_mask_gscl_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_GSCL, clk, enable);
+}
+
+static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
+}
+
+static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable);
+}
+
+static int exynos5_clk_ip_disp1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_DISP1, clk, enable);
+}
+
+static int exynos5_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_FSYS, clk, enable);
+}
+
+static int exynos5_clk_block_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_BLOCK, clk, enable);
+}
+
+static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable);
+}
+
+static int exynos5_clk_ip_gps_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GPS, clk, enable);
+}
+
+static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable);
+}
+
+static int exynos5_clk_ip_peric_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIC, clk, enable);
+}
+
+static int exynos5_clk_ip_peris_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable);
+}
+
+/* Core list of CMU_CPU side */
+
+static struct clksrc_clk exynos5_clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_apll = {
+ .clk = {
+ .name = "sclk_apll",
+ .parent = &exynos5_clk_mout_apll.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_mout_bpll = {
+ .clk = {
+ .name = "mout_bpll",
+ },
+ .sources = &clk_src_bpll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_bpll_user_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &exynos5_clk_mout_bpll.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_bpll_user = {
+ .sources = exynos5_clk_src_bpll_user_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_user_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_bpll_user = {
+ .clk = {
+ .name = "mout_bpll_user",
+ },
+ .sources = &exynos5_clk_src_bpll_user,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_mout_cpll = {
+ .clk = {
+ .name = "mout_cpll",
+ },
+ .sources = &clk_src_cpll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
+};
+
+struct clksrc_clk exynos5_clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ },
+ .sources = &clk_src_mpll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
+};
+
+static struct clk *exynos_clkset_vpllsrc_list[] = {
+ [0] = &clk_fin_vpll,
+ [1] = &exynos5_clk_sclk_hdmi27m,
+};
+
+static struct clksrc_sources exynos5_clkset_vpllsrc = {
+ .sources = exynos_clkset_vpllsrc_list,
+ .nr_sources = ARRAY_SIZE(exynos_clkset_vpllsrc_list),
+};
+
+static struct clksrc_clk exynos5_clk_vpllsrc = {
+ .clk = {
+ .name = "vpll_src",
+ .enable = exynos5_clksrc_mask_top_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos5_clkset_vpllsrc,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_sclk_vpll_list[] = {
+ [0] = &exynos5_clk_vpllsrc.clk,
+ [1] = &clk_fout_vpll,
+};
+
+static struct clksrc_sources exynos5_clkset_sclk_vpll = {
+ .sources = exynos5_clkset_sclk_vpll_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_vpll_list),
+};
+
+static struct clksrc_clk exynos5_clk_sclk_vpll = {
+ .clk = {
+ .name = "sclk_vpll",
+ },
+ .sources = &exynos5_clkset_sclk_vpll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_pixel = {
+ .clk = {
+ .name = "sclk_pixel",
+ .parent = &exynos5_clk_sclk_vpll.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 28, .size = 4 },
+};
+
+static struct clk *exynos5_clkset_sclk_hdmi_list[] = {
+ [0] = &exynos5_clk_sclk_pixel.clk,
+ [1] = &exynos5_clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources exynos5_clkset_sclk_hdmi = {
+ .sources = exynos5_clkset_sclk_hdmi_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk exynos5_clk_sclk_hdmi = {
+ .clk = {
+ .name = "sclk_hdmi",
+ .enable = exynos5_clksrc_mask_disp1_0_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &exynos5_clkset_sclk_hdmi,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 20, .size = 1 },
+};
+
+static struct clksrc_clk *exynos5_sclk_tv[] = {
+ &exynos5_clk_sclk_pixel,
+ &exynos5_clk_sclk_hdmi,
+};
+
+static struct clk *exynos5_clk_src_mpll_user_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &exynos5_clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_mpll_user = {
+ .sources = exynos5_clk_src_mpll_user_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_user_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_mpll_user = {
+ .clk = {
+ .name = "mout_mpll_user",
+ },
+ .sources = &exynos5_clk_src_mpll_user,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 20, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_mout_cpu_list[] = {
+ [0] = &exynos5_clk_mout_apll.clk,
+ [1] = &exynos5_clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_mout_cpu = {
+ .sources = exynos5_clkset_mout_cpu_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_mout_cpu_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_cpu = {
+ .clk = {
+ .name = "mout_cpu",
+ },
+ .sources = &exynos5_clkset_mout_cpu,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_armclk = {
+ .clk = {
+ .name = "dout_armclk",
+ .parent = &exynos5_clk_mout_cpu.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_arm2clk = {
+ .clk = {
+ .name = "dout_arm2clk",
+ .parent = &exynos5_clk_dout_armclk.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 28, .size = 3 },
+};
+
+static struct clk exynos5_clk_armclk = {
+ .name = "armclk",
+ .parent = &exynos5_clk_dout_arm2clk.clk,
+};
+
+/* Core list of CMU_CDREX side */
+
+static struct clk *exynos5_clkset_cdrex_list[] = {
+ [0] = &exynos5_clk_mout_mpll.clk,
+ [1] = &exynos5_clk_mout_bpll.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_cdrex = {
+ .sources = exynos5_clkset_cdrex_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_cdrex_list),
+};
+
+static struct clksrc_clk exynos5_clk_cdrex = {
+ .clk = {
+ .name = "clk_cdrex",
+ },
+ .sources = &exynos5_clkset_cdrex,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 4, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_CDREX, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_acp = {
+ .clk = {
+ .name = "aclk_acp",
+ .parent = &exynos5_clk_mout_mpll.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_pclk_acp = {
+ .clk = {
+ .name = "pclk_acp",
+ .parent = &exynos5_clk_aclk_acp.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 4, .size = 3 },
+};
+
+/* Core list of CMU_TOP side */
+
+struct clk *exynos5_clkset_aclk_top_list[] = {
+ [0] = &exynos5_clk_mout_mpll_user.clk,
+ [1] = &exynos5_clk_mout_bpll_user.clk,
+};
+
+struct clksrc_sources exynos5_clkset_aclk = {
+ .sources = exynos5_clkset_aclk_top_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_top_list),
+};
+
+static struct clksrc_clk exynos5_clk_aclk_400 = {
+ .clk = {
+ .name = "aclk_400",
+ },
+ .sources = &exynos5_clkset_aclk,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
+};
+
+struct clk *exynos5_clkset_aclk_333_166_list[] = {
+ [0] = &exynos5_clk_mout_cpll.clk,
+ [1] = &exynos5_clk_mout_mpll_user.clk,
+};
+
+struct clksrc_sources exynos5_clkset_aclk_333_166 = {
+ .sources = exynos5_clkset_aclk_333_166_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_333_166_list),
+};
+
+static struct clksrc_clk exynos5_clk_aclk_333 = {
+ .clk = {
+ .name = "aclk_333",
+ },
+ .sources = &exynos5_clkset_aclk_333_166,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 16, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 20, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_166 = {
+ .clk = {
+ .name = "aclk_166",
+ },
+ .sources = &exynos5_clkset_aclk_333_166,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 8, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_266 = {
+ .clk = {
+ .name = "aclk_266",
+ .parent = &exynos5_clk_mout_mpll_user.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_200 = {
+ .clk = {
+ .name = "aclk_200",
+ },
+ .sources = &exynos5_clkset_aclk,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 12, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_66_pre = {
+ .clk = {
+ .name = "aclk_66_pre",
+ .parent = &exynos5_clk_mout_mpll_user.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP1, .shift = 24, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_66 = {
+ .clk = {
+ .name = "aclk_66",
+ .parent = &exynos5_clk_aclk_66_pre.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 },
+};
+
+static struct clk exynos5_init_clocks_off[] = {
+ {
+ .name = "timers",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 24),
+ }, {
+ .name = "rtc",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peris_ctrl,
+ .ctrlbit = (1 << 20),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &exynos5_clk_aclk_200.clk,
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &exynos5_clk_aclk_200.clk,
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &exynos5_clk_aclk_200.clk,
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 14),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &exynos5_clk_aclk_200.clk,
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "dwmci",
+ .parent = &exynos5_clk_aclk_200.clk,
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "sata",
+ .devname = "ahci",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "sata_phy",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 24),
+ }, {
+ .name = "sata_phy_i2c",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 25),
+ }, {
+ .name = "mfc",
+ .devname = "s5p-mfc",
+ .enable = exynos5_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "hdmi",
+ .devname = "exynos4-hdmi",
+ .enable = exynos5_clk_ip_disp1_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "mixer",
+ .devname = "s5p-mixer",
+ .enable = exynos5_clk_ip_disp1_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "jpeg",
+ .enable = exynos5_clk_ip_gen_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "dsim0",
+ .enable = exynos5_clk_ip_disp1_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.1",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 20),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.2",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 21),
+ }, {
+ .name = "pcm",
+ .devname = "samsung-pcm.1",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 22),
+ }, {
+ .name = "pcm",
+ .devname = "samsung-pcm.2",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 23),
+ }, {
+ .name = "spdif",
+ .devname = "samsung-spdif",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 26),
+ }, {
+ .name = "ac97",
+ .devname = "samsung-ac97",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 27),
+ }, {
+ .name = "usbhost",
+ .enable = exynos5_clk_ip_fsys_ctrl ,
+ .ctrlbit = (1 << 18),
+ }, {
+ .name = "usbotg",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "gps",
+ .enable = exynos5_clk_ip_gps_ctrl,
+ .ctrlbit = ((1 << 3) | (1 << 2) | (1 << 0)),
+ }, {
+ .name = "nfcon",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 22),
+ }, {
+ .name = "iop",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = ((1 << 30) | (1 << 26) | (1 << 23)),
+ }, {
+ .name = "core_iop",
+ .enable = exynos5_clk_ip_core_ctrl,
+ .ctrlbit = ((1 << 21) | (1 << 3)),
+ }, {
+ .name = "mcu_iop",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.0",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.1",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.2",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.3",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.4",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.5",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.6",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.7",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-hdmiphy-i2c",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 14),
+ }
+};
+
+static struct clk exynos5_init_clocks_on[] = {
+ {
+ .name = "uart",
+ .devname = "s5pv210-uart.0",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.1",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.2",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.3",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.4",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.5",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 5),
+ }
+};
+
+static struct clk exynos5_clk_pdma0 = {
+ .name = "dma",
+ .devname = "dma-pl330.0",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 1),
+};
+
+static struct clk exynos5_clk_pdma1 = {
+ .name = "dma",
+ .devname = "dma-pl330.1",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 1),
+};
+
+static struct clk exynos5_clk_mdma1 = {
+ .name = "dma",
+ .devname = "dma-pl330.2",
+ .enable = exynos5_clk_ip_gen_ctrl,
+ .ctrlbit = (1 << 4),
+};
+
+struct clk *exynos5_clkset_group_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = NULL,
+ [2] = &exynos5_clk_sclk_hdmi24m,
+ [3] = &exynos5_clk_sclk_dptxphy,
+ [4] = &exynos5_clk_sclk_usbphy,
+ [5] = &exynos5_clk_sclk_hdmiphy,
+ [6] = &exynos5_clk_mout_mpll_user.clk,
+ [7] = &exynos5_clk_mout_epll.clk,
+ [8] = &exynos5_clk_sclk_vpll.clk,
+ [9] = &exynos5_clk_mout_cpll.clk,
+};
+
+struct clksrc_sources exynos5_clkset_group = {
+ .sources = exynos5_clkset_group_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_group_list),
+};
+
+/* Possible clock sources for aclk_266_gscl_sub Mux */
+static struct clk *clk_src_gscl_266_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = &exynos5_clk_aclk_266.clk,
+};
+
+static struct clksrc_sources clk_src_gscl_266 = {
+ .sources = clk_src_gscl_266_list,
+ .nr_sources = ARRAY_SIZE(clk_src_gscl_266_list),
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc0 = {
+ .clk = {
+ .name = "dout_mmc0",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc1 = {
+ .clk = {
+ .name = "dout_mmc1",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 4, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc2 = {
+ .clk = {
+ .name = "dout_mmc2",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 8, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc3 = {
+ .clk = {
+ .name = "dout_mmc3",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 12, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc4 = {
+ .clk = {
+ .name = "dout_mmc4",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 16, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart0 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.0",
+ .enable = exynos5_clksrc_mask_peric0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart1 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.1",
+ .enable = exynos5_clksrc_mask_peric0_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 4, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart2 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.2",
+ .enable = exynos5_clksrc_mask_peric0_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 8, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart3 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.3",
+ .enable = exynos5_clksrc_mask_peric0_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 12, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 12, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &exynos5_clk_dout_mmc0.clk,
+ .enable = exynos5_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &exynos5_clk_dout_mmc1.clk,
+ .enable = exynos5_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &exynos5_clk_dout_mmc2.clk,
+ .enable = exynos5_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &exynos5_clk_dout_mmc3.clk,
+ .enable = exynos5_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clksrcs[] = {
+ {
+ .clk = {
+ .name = "sclk_dwmci",
+ .parent = &exynos5_clk_dout_mmc4.clk,
+ .enable = exynos5_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 8, .size = 8 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .devname = "s3cfb.1",
+ .enable = exynos5_clksrc_mask_disp1_0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "aclk_266_gscl",
+ },
+ .sources = &clk_src_gscl_266,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 8, .size = 1 },
+ }, {
+ .clk = {
+ .name = "sclk_g3d",
+ .devname = "mali-t604.0",
+ .enable = exynos5_clk_block_ctrl,
+ .ctrlbit = (1 << 1),
+ },
+ .sources = &exynos5_clkset_aclk,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
+ }, {
+ .clk = {
+ .name = "sclk_gscl_wrap",
+ .devname = "s5p-mipi-csis.0",
+ .enable = exynos5_clksrc_mask_gscl_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 24, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 24, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_gscl_wrap",
+ .devname = "s5p-mipi-csis.1",
+ .enable = exynos5_clksrc_mask_gscl_ctrl,
+ .ctrlbit = (1 << 28),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 28, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 28, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam0",
+ .enable = exynos5_clksrc_mask_gscl_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 16, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam1",
+ .enable = exynos5_clksrc_mask_gscl_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 20, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_jpeg",
+ .parent = &exynos5_clk_mout_cpll.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_GEN, .shift = 4, .size = 3 },
+ },
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *exynos5_sysclks[] = {
+ &exynos5_clk_mout_apll,
+ &exynos5_clk_sclk_apll,
+ &exynos5_clk_mout_bpll,
+ &exynos5_clk_mout_bpll_user,
+ &exynos5_clk_mout_cpll,
+ &exynos5_clk_mout_epll,
+ &exynos5_clk_mout_mpll,
+ &exynos5_clk_mout_mpll_user,
+ &exynos5_clk_vpllsrc,
+ &exynos5_clk_sclk_vpll,
+ &exynos5_clk_mout_cpu,
+ &exynos5_clk_dout_armclk,
+ &exynos5_clk_dout_arm2clk,
+ &exynos5_clk_cdrex,
+ &exynos5_clk_aclk_400,
+ &exynos5_clk_aclk_333,
+ &exynos5_clk_aclk_266,
+ &exynos5_clk_aclk_200,
+ &exynos5_clk_aclk_166,
+ &exynos5_clk_aclk_66_pre,
+ &exynos5_clk_aclk_66,
+ &exynos5_clk_dout_mmc0,
+ &exynos5_clk_dout_mmc1,
+ &exynos5_clk_dout_mmc2,
+ &exynos5_clk_dout_mmc3,
+ &exynos5_clk_dout_mmc4,
+ &exynos5_clk_aclk_acp,
+ &exynos5_clk_pclk_acp,
+};
+
+static struct clk *exynos5_clk_cdev[] = {
+ &exynos5_clk_pdma0,
+ &exynos5_clk_pdma1,
+ &exynos5_clk_mdma1,
+};
+
+static struct clksrc_clk *exynos5_clksrc_cdev[] = {
+ &exynos5_clk_sclk_uart0,
+ &exynos5_clk_sclk_uart1,
+ &exynos5_clk_sclk_uart2,
+ &exynos5_clk_sclk_uart3,
+ &exynos5_clk_sclk_mmc0,
+ &exynos5_clk_sclk_mmc1,
+ &exynos5_clk_sclk_mmc2,
+ &exynos5_clk_sclk_mmc3,
+};
+
+static struct clk_lookup exynos5_clk_lookup[] = {
+ CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos5_clk_sclk_uart0.clk),
+ CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
+ CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
+ CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
+ CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
+ CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
+ CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
+ CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
+};
+
+static unsigned long exynos5_epll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+static struct clk *exynos5_clks[] __initdata = {
+ &exynos5_clk_sclk_hdmi27m,
+ &exynos5_clk_sclk_hdmiphy,
+ &clk_fout_bpll,
+ &clk_fout_cpll,
+ &exynos5_clk_armclk,
+};
+
+static u32 epll_div[][6] = {
+ { 192000000, 0, 48, 3, 1, 0 },
+ { 180000000, 0, 45, 3, 1, 0 },
+ { 73728000, 1, 73, 3, 3, 47710 },
+ { 67737600, 1, 90, 4, 3, 20762 },
+ { 49152000, 0, 49, 3, 3, 9961 },
+ { 45158400, 0, 45, 3, 3, 10381 },
+ { 180633600, 0, 45, 3, 1, 10381 },
+};
+
+static int exynos5_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int epll_con, epll_con_k;
+ unsigned int i;
+ unsigned int tmp;
+ unsigned int epll_rate;
+ unsigned int locktime;
+ unsigned int lockcnt;
+
+ /* Return if nothing changed */
+ if (clk->rate == rate)
+ return 0;
+
+ if (clk->parent)
+ epll_rate = clk_get_rate(clk->parent);
+ else
+ epll_rate = clk_ext_xtal_mux.rate;
+
+ if (epll_rate != 24000000) {
+ pr_err("Invalid Clock : recommended clock is 24MHz.\n");
+ return -EINVAL;
+ }
+
+ epll_con = __raw_readl(EXYNOS5_EPLL_CON0);
+ epll_con &= ~(0x1 << 27 | \
+ PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
+ PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
+ PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+ if (epll_div[i][0] == rate) {
+ epll_con_k = epll_div[i][5] << 0;
+ epll_con |= epll_div[i][1] << 27;
+ epll_con |= epll_div[i][2] << PLL46XX_MDIV_SHIFT;
+ epll_con |= epll_div[i][3] << PLL46XX_PDIV_SHIFT;
+ epll_con |= epll_div[i][4] << PLL46XX_SDIV_SHIFT;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(epll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ epll_rate /= 1000000;
+
+ /* 3000 max_cycls : specification data */
+ locktime = 3000 / epll_rate * epll_div[i][3];
+ lockcnt = locktime * 10000 / (10000 / epll_rate);
+
+ __raw_writel(lockcnt, EXYNOS5_EPLL_LOCK);
+
+ __raw_writel(epll_con, EXYNOS5_EPLL_CON0);
+ __raw_writel(epll_con_k, EXYNOS5_EPLL_CON1);
+
+ do {
+ tmp = __raw_readl(EXYNOS5_EPLL_CON0);
+ } while (!(tmp & 0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT));
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+static struct clk_ops exynos5_epll_ops = {
+ .get_rate = exynos5_epll_get_rate,
+ .set_rate = exynos5_epll_set_rate,
+};
+
+static int xtal_rate;
+
+static unsigned long exynos5_fout_apll_get_rate(struct clk *clk)
+{
+ return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS5_APLL_CON0));
+}
+
+static struct clk_ops exynos5_fout_apll_ops = {
+ .get_rate = exynos5_fout_apll_get_rate,
+};
+
+#ifdef CONFIG_PM
+static int exynos5_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
+
+ return 0;
+}
+
+static void exynos5_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
+}
+#else
+#define exynos5_clock_suspend NULL
+#define exynos5_clock_resume NULL
+#endif
+
+struct syscore_ops exynos5_clock_syscore_ops = {
+ .suspend = exynos5_clock_suspend,
+ .resume = exynos5_clock_resume,
+};
+
+void __init_or_cpufreq exynos5_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long apll;
+ unsigned long bpll;
+ unsigned long cpll;
+ unsigned long mpll;
+ unsigned long epll;
+ unsigned long vpll;
+ unsigned long vpllsrc;
+ unsigned long xtal;
+ unsigned long armclk;
+ unsigned long mout_cdrex;
+ unsigned long aclk_400;
+ unsigned long aclk_333;
+ unsigned long aclk_266;
+ unsigned long aclk_200;
+ unsigned long aclk_166;
+ unsigned long aclk_66;
+ unsigned int ptr;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ xtal_clk = clk_get(NULL, "xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+
+ xtal_rate = xtal;
+
+ clk_put(xtal_clk);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_APLL_CON0));
+ bpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_BPLL_CON0));
+ cpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_CPLL_CON0));
+ mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_MPLL_CON0));
+ epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS5_EPLL_CON0),
+ __raw_readl(EXYNOS5_EPLL_CON1));
+
+ vpllsrc = clk_get_rate(&exynos5_clk_vpllsrc.clk);
+ vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS5_VPLL_CON0),
+ __raw_readl(EXYNOS5_VPLL_CON1));
+
+ clk_fout_apll.ops = &exynos5_fout_apll_ops;
+ clk_fout_bpll.rate = bpll;
+ clk_fout_cpll.rate = cpll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_fout_vpll.rate = vpll;
+
+ printk(KERN_INFO "EXYNOS5: PLL settings, A=%ld, B=%ld, C=%ld\n"
+ "M=%ld, E=%ld V=%ld",
+ apll, bpll, cpll, mpll, epll, vpll);
+
+ armclk = clk_get_rate(&exynos5_clk_armclk);
+ mout_cdrex = clk_get_rate(&exynos5_clk_cdrex.clk);
+
+ aclk_400 = clk_get_rate(&exynos5_clk_aclk_400.clk);
+ aclk_333 = clk_get_rate(&exynos5_clk_aclk_333.clk);
+ aclk_266 = clk_get_rate(&exynos5_clk_aclk_266.clk);
+ aclk_200 = clk_get_rate(&exynos5_clk_aclk_200.clk);
+ aclk_166 = clk_get_rate(&exynos5_clk_aclk_166.clk);
+ aclk_66 = clk_get_rate(&exynos5_clk_aclk_66.clk);
+
+ printk(KERN_INFO "EXYNOS5: ARMCLK=%ld, CDREX=%ld, ACLK400=%ld\n"
+ "ACLK333=%ld, ACLK266=%ld, ACLK200=%ld\n"
+ "ACLK166=%ld, ACLK66=%ld\n",
+ armclk, mout_cdrex, aclk_400,
+ aclk_333, aclk_266, aclk_200,
+ aclk_166, aclk_66);
+
+
+ clk_fout_epll.ops = &exynos5_epll_ops;
+
+ if (clk_set_parent(&exynos5_clk_mout_epll.clk, &clk_fout_epll))
+ printk(KERN_ERR "Unable to set parent %s of clock %s.\n",
+ clk_fout_epll.name, exynos5_clk_mout_epll.clk.name);
+
+ clk_set_rate(&exynos5_clk_sclk_apll.clk, 100000000);
+ clk_set_rate(&exynos5_clk_aclk_266.clk, 300000000);
+
+ clk_set_rate(&exynos5_clk_aclk_acp.clk, 267000000);
+ clk_set_rate(&exynos5_clk_pclk_acp.clk, 134000000);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrcs); ptr++)
+ s3c_set_clksrc(&exynos5_clksrcs[ptr], true);
+}
+
+void __init exynos5_register_clocks(void)
+{
+ int ptr;
+
+ s3c24xx_register_clocks(exynos5_clks, ARRAY_SIZE(exynos5_clks));
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sysclks); ptr++)
+ s3c_register_clksrc(exynos5_sysclks[ptr], 1);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sclk_tv); ptr++)
+ s3c_register_clksrc(exynos5_sclk_tv[ptr], 1);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrc_cdev); ptr++)
+ s3c_register_clksrc(exynos5_clksrc_cdev[ptr], 1);
+
+ s3c_register_clksrc(exynos5_clksrcs, ARRAY_SIZE(exynos5_clksrcs));
+ s3c_register_clocks(exynos5_init_clocks_on, ARRAY_SIZE(exynos5_init_clocks_on));
+
+ s3c24xx_register_clocks(exynos5_clk_cdev, ARRAY_SIZE(exynos5_clk_cdev));
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clk_cdev); ptr++)
+ s3c_disable_clocks(exynos5_clk_cdev[ptr], 1);
+
+ s3c_register_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
+ s3c_disable_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
+ clkdev_add_table(exynos5_clk_lookup, ARRAY_SIZE(exynos5_clk_lookup));
+
+ register_syscore_ops(&exynos5_clock_syscore_ops);
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c
deleted file mode 100644
index 187287a..0000000
--- a/arch/arm/mach-exynos/clock.c
+++ /dev/null
@@ -1,1564 +0,0 @@
-/* linux/arch/arm/mach-exynos4/clock.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/pll.h>
-#include <plat/s5p-clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/pm.h>
-
-#include <mach/map.h>
-#include <mach/regs-clock.h>
-#include <mach/sysmmu.h>
-#include <mach/exynos4-clock.h>
-
-#include "common.h"
-
-#ifdef CONFIG_PM_SLEEP
-static struct sleep_save exynos4_clock_save[] = {
- SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
- SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
- SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
- SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
- SAVE_ITEM(S5P_CLKSRC_TOP0),
- SAVE_ITEM(S5P_CLKSRC_TOP1),
- SAVE_ITEM(S5P_CLKSRC_CAM),
- SAVE_ITEM(S5P_CLKSRC_TV),
- SAVE_ITEM(S5P_CLKSRC_MFC),
- SAVE_ITEM(S5P_CLKSRC_G3D),
- SAVE_ITEM(S5P_CLKSRC_LCD0),
- SAVE_ITEM(S5P_CLKSRC_MAUDIO),
- SAVE_ITEM(S5P_CLKSRC_FSYS),
- SAVE_ITEM(S5P_CLKSRC_PERIL0),
- SAVE_ITEM(S5P_CLKSRC_PERIL1),
- SAVE_ITEM(S5P_CLKDIV_CAM),
- SAVE_ITEM(S5P_CLKDIV_TV),
- SAVE_ITEM(S5P_CLKDIV_MFC),
- SAVE_ITEM(S5P_CLKDIV_G3D),
- SAVE_ITEM(S5P_CLKDIV_LCD0),
- SAVE_ITEM(S5P_CLKDIV_MAUDIO),
- SAVE_ITEM(S5P_CLKDIV_FSYS0),
- SAVE_ITEM(S5P_CLKDIV_FSYS1),
- SAVE_ITEM(S5P_CLKDIV_FSYS2),
- SAVE_ITEM(S5P_CLKDIV_FSYS3),
- SAVE_ITEM(S5P_CLKDIV_PERIL0),
- SAVE_ITEM(S5P_CLKDIV_PERIL1),
- SAVE_ITEM(S5P_CLKDIV_PERIL2),
- SAVE_ITEM(S5P_CLKDIV_PERIL3),
- SAVE_ITEM(S5P_CLKDIV_PERIL4),
- SAVE_ITEM(S5P_CLKDIV_PERIL5),
- SAVE_ITEM(S5P_CLKDIV_TOP),
- SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
- SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
- SAVE_ITEM(S5P_CLKSRC_MASK_TV),
- SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
- SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
- SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
- SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
- SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
- SAVE_ITEM(S5P_CLKDIV2_RATIO),
- SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
- SAVE_ITEM(S5P_CLKGATE_IP_CAM),
- SAVE_ITEM(S5P_CLKGATE_IP_TV),
- SAVE_ITEM(S5P_CLKGATE_IP_MFC),
- SAVE_ITEM(S5P_CLKGATE_IP_G3D),
- SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
- SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
- SAVE_ITEM(S5P_CLKGATE_IP_GPS),
- SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
- SAVE_ITEM(S5P_CLKGATE_BLOCK),
- SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
- SAVE_ITEM(S5P_CLKSRC_DMC),
- SAVE_ITEM(S5P_CLKDIV_DMC0),
- SAVE_ITEM(S5P_CLKDIV_DMC1),
- SAVE_ITEM(S5P_CLKGATE_IP_DMC),
- SAVE_ITEM(S5P_CLKSRC_CPU),
- SAVE_ITEM(S5P_CLKDIV_CPU),
- SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
- SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
- SAVE_ITEM(S5P_CLKGATE_IP_CPU),
-};
-#endif
-
-struct clk clk_sclk_hdmi27m = {
- .name = "sclk_hdmi27m",
- .rate = 27000000,
-};
-
-struct clk clk_sclk_hdmiphy = {
- .name = "sclk_hdmiphy",
-};
-
-struct clk clk_sclk_usbphy0 = {
- .name = "sclk_usbphy0",
- .rate = 27000000,
-};
-
-struct clk clk_sclk_usbphy1 = {
- .name = "sclk_usbphy1",
-};
-
-static struct clk dummy_apb_pclk = {
- .name = "apb_pclk",
- .id = -1,
-};
-
-static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable);
-}
-
-static int exynos4_clksrc_mask_cam_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_CAM, clk, enable);
-}
-
-static int exynos4_clksrc_mask_lcd0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
-}
-
-int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL0, clk, enable);
-}
-
-static int exynos4_clksrc_mask_peril1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_PERIL1, clk, enable);
-}
-
-static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable);
-}
-
-static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKSRC_MASK_TV, clk, enable);
-}
-
-static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable);
-}
-
-static int exynos4_clk_ip_tv_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_TV, clk, enable);
-}
-
-static int exynos4_clk_ip_image_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_IMAGE, clk, enable);
-}
-
-static int exynos4_clk_ip_lcd0_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
-}
-
-int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
-}
-
-int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
-}
-
-static int exynos4_clk_ip_peril_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_PERIL, clk, enable);
-}
-
-static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable);
-}
-
-static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable);
-}
-
-static int exynos4_clk_dac_ctrl(struct clk *clk, int enable)
-{
- return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable);
-}
-
-/* Core list of CMU_CPU side */
-
-static struct clksrc_clk clk_mout_apll = {
- .clk = {
- .name = "mout_apll",
- },
- .sources = &clk_src_apll,
- .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
-};
-
-struct clksrc_clk clk_sclk_apll = {
- .clk = {
- .name = "sclk_apll",
- .parent = &clk_mout_apll.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
-};
-
-struct clksrc_clk clk_mout_epll = {
- .clk = {
- .name = "mout_epll",
- },
- .sources = &clk_src_epll,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
-};
-
-struct clksrc_clk clk_mout_mpll = {
- .clk = {
- .name = "mout_mpll",
- },
- .sources = &clk_src_mpll,
-
- /* reg_src will be added in each SoCs' clock */
-};
-
-static struct clk *clkset_moutcore_list[] = {
- [0] = &clk_mout_apll.clk,
- [1] = &clk_mout_mpll.clk,
-};
-
-static struct clksrc_sources clkset_moutcore = {
- .sources = clkset_moutcore_list,
- .nr_sources = ARRAY_SIZE(clkset_moutcore_list),
-};
-
-static struct clksrc_clk clk_moutcore = {
- .clk = {
- .name = "moutcore",
- },
- .sources = &clkset_moutcore,
- .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 16, .size = 1 },
-};
-
-static struct clksrc_clk clk_coreclk = {
- .clk = {
- .name = "core_clk",
- .parent = &clk_moutcore.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk clk_armclk = {
- .clk = {
- .name = "armclk",
- .parent = &clk_coreclk.clk,
- },
-};
-
-static struct clksrc_clk clk_aclk_corem0 = {
- .clk = {
- .name = "aclk_corem0",
- .parent = &clk_coreclk.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_cores = {
- .clk = {
- .name = "aclk_cores",
- .parent = &clk_coreclk.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_corem1 = {
- .clk = {
- .name = "aclk_corem1",
- .parent = &clk_coreclk.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 8, .size = 3 },
-};
-
-static struct clksrc_clk clk_periphclk = {
- .clk = {
- .name = "periphclk",
- .parent = &clk_coreclk.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 },
-};
-
-/* Core list of CMU_CORE side */
-
-struct clk *clkset_corebus_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_sclk_apll.clk,
-};
-
-struct clksrc_sources clkset_mout_corebus = {
- .sources = clkset_corebus_list,
- .nr_sources = ARRAY_SIZE(clkset_corebus_list),
-};
-
-static struct clksrc_clk clk_mout_corebus = {
- .clk = {
- .name = "mout_corebus",
- },
- .sources = &clkset_mout_corebus,
- .reg_src = { .reg = S5P_CLKSRC_DMC, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk clk_sclk_dmc = {
- .clk = {
- .name = "sclk_dmc",
- .parent = &clk_mout_corebus.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 12, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_cored = {
- .clk = {
- .name = "aclk_cored",
- .parent = &clk_sclk_dmc.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 16, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_corep = {
- .clk = {
- .name = "aclk_corep",
- .parent = &clk_aclk_cored.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 20, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_acp = {
- .clk = {
- .name = "aclk_acp",
- .parent = &clk_mout_corebus.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk clk_pclk_acp = {
- .clk = {
- .name = "pclk_acp",
- .parent = &clk_aclk_acp.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 4, .size = 3 },
-};
-
-/* Core list of CMU_TOP side */
-
-struct clk *clkset_aclk_top_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_sclk_apll.clk,
-};
-
-struct clksrc_sources clkset_aclk = {
- .sources = clkset_aclk_top_list,
- .nr_sources = ARRAY_SIZE(clkset_aclk_top_list),
-};
-
-static struct clksrc_clk clk_aclk_200 = {
- .clk = {
- .name = "aclk_200",
- },
- .sources = &clkset_aclk,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 0, .size = 3 },
-};
-
-static struct clksrc_clk clk_aclk_100 = {
- .clk = {
- .name = "aclk_100",
- },
- .sources = &clkset_aclk,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_aclk_160 = {
- .clk = {
- .name = "aclk_160",
- },
- .sources = &clkset_aclk,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
-};
-
-struct clksrc_clk clk_aclk_133 = {
- .clk = {
- .name = "aclk_133",
- },
- .sources = &clkset_aclk,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_TOP, .shift = 12, .size = 3 },
-};
-
-static struct clk *clkset_vpllsrc_list[] = {
- [0] = &clk_fin_vpll,
- [1] = &clk_sclk_hdmi27m,
-};
-
-static struct clksrc_sources clkset_vpllsrc = {
- .sources = clkset_vpllsrc_list,
- .nr_sources = ARRAY_SIZE(clkset_vpllsrc_list),
-};
-
-static struct clksrc_clk clk_vpllsrc = {
- .clk = {
- .name = "vpll_src",
- .enable = exynos4_clksrc_mask_top_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_vpllsrc,
- .reg_src = { .reg = S5P_CLKSRC_TOP1, .shift = 0, .size = 1 },
-};
-
-static struct clk *clkset_sclk_vpll_list[] = {
- [0] = &clk_vpllsrc.clk,
- [1] = &clk_fout_vpll,
-};
-
-static struct clksrc_sources clkset_sclk_vpll = {
- .sources = clkset_sclk_vpll_list,
- .nr_sources = ARRAY_SIZE(clkset_sclk_vpll_list),
-};
-
-struct clksrc_clk clk_sclk_vpll = {
- .clk = {
- .name = "sclk_vpll",
- },
- .sources = &clkset_sclk_vpll,
- .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 },
-};
-
-static struct clk init_clocks_off[] = {
- {
- .name = "timers",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1<<24),
- }, {
- .name = "csis",
- .devname = "s5p-mipi-csis.0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "csis",
- .devname = "s5p-mipi-csis.1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.2",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "fimc",
- .devname = "exynos4-fimc.3",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "fimd",
- .devname = "exynos4-fb.0",
- .enable = exynos4_clk_ip_lcd0_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.3",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "dwmmc",
- .parent = &clk_aclk_133.clk,
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "dac",
- .devname = "s5p-sdo",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "mixer",
- .devname = "s5p-mixer",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "vp",
- .devname = "s5p-mixer",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "hdmi",
- .devname = "exynos4-hdmi",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "hdmiphy",
- .devname = "exynos4-hdmi",
- .enable = exynos4_clk_hdmiphy_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "dacphy",
- .devname = "s5p-sdo",
- .enable = exynos4_clk_dac_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "adc",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "keypad",
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "rtc",
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 15),
- }, {
- .name = "watchdog",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_perir_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "usbhost",
- .enable = exynos4_clk_ip_fsys_ctrl ,
- .ctrlbit = (1 << 12),
- }, {
- .name = "otg",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "spi",
- .devname = "s3c64xx-spi.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 16),
- }, {
- .name = "spi",
- .devname = "s3c64xx-spi.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 17),
- }, {
- .name = "spi",
- .devname = "s3c64xx-spi.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 19),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 20),
- }, {
- .name = "iis",
- .devname = "samsung-i2s.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 21),
- }, {
- .name = "ac97",
- .devname = "samsung-ac97",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 27),
- }, {
- .name = "fimg2d",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "mfc",
- .devname = "s5p-mfc",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.0",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.1",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.2",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.3",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.4",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.5",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.6",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 12),
- }, {
- .name = "i2c",
- .devname = "s3c2440-i2c.7",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 13),
- }, {
- .name = "i2c",
- .devname = "s3c2440-hdmiphy-i2c",
- .parent = &clk_aclk_100.clk,
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 14),
- }, {
- .name = "SYSMMU_MDMA",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 5),
- }, {
- .name = "SYSMMU_FIMC0",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "SYSMMU_FIMC1",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "SYSMMU_FIMC2",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 9),
- }, {
- .name = "SYSMMU_FIMC3",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 10),
- }, {
- .name = "SYSMMU_JPEG",
- .enable = exynos4_clk_ip_cam_ctrl,
- .ctrlbit = (1 << 11),
- }, {
- .name = "SYSMMU_FIMD0",
- .enable = exynos4_clk_ip_lcd0_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_FIMD1",
- .enable = exynos4_clk_ip_lcd1_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_PCIe",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 18),
- }, {
- .name = "SYSMMU_G2D",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "SYSMMU_ROTATOR",
- .enable = exynos4_clk_ip_image_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_TV",
- .enable = exynos4_clk_ip_tv_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "SYSMMU_MFC_L",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "SYSMMU_MFC_R",
- .enable = exynos4_clk_ip_mfc_ctrl,
- .ctrlbit = (1 << 2),
- }
-};
-
-static struct clk init_clocks[] = {
- {
- .name = "uart",
- .devname = "s5pv210-uart.0",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.1",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 1),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.2",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 2),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.3",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 3),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.4",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 4),
- }, {
- .name = "uart",
- .devname = "s5pv210-uart.5",
- .enable = exynos4_clk_ip_peril_ctrl,
- .ctrlbit = (1 << 5),
- }
-};
-
-static struct clk clk_pdma0 = {
- .name = "dma",
- .devname = "dma-pl330.0",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 0),
-};
-
-static struct clk clk_pdma1 = {
- .name = "dma",
- .devname = "dma-pl330.1",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 1),
-};
-
-struct clk *clkset_group_list[] = {
- [0] = &clk_ext_xtal_mux,
- [1] = &clk_xusbxti,
- [2] = &clk_sclk_hdmi27m,
- [3] = &clk_sclk_usbphy0,
- [4] = &clk_sclk_usbphy1,
- [5] = &clk_sclk_hdmiphy,
- [6] = &clk_mout_mpll.clk,
- [7] = &clk_mout_epll.clk,
- [8] = &clk_sclk_vpll.clk,
-};
-
-struct clksrc_sources clkset_group = {
- .sources = clkset_group_list,
- .nr_sources = ARRAY_SIZE(clkset_group_list),
-};
-
-static struct clk *clkset_mout_g2d0_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources clkset_mout_g2d0 = {
- .sources = clkset_mout_g2d0_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_g2d0_list),
-};
-
-static struct clksrc_clk clk_mout_g2d0 = {
- .clk = {
- .name = "mout_g2d0",
- },
- .sources = &clkset_mout_g2d0,
- .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 0, .size = 1 },
-};
-
-static struct clk *clkset_mout_g2d1_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources clkset_mout_g2d1 = {
- .sources = clkset_mout_g2d1_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_g2d1_list),
-};
-
-static struct clksrc_clk clk_mout_g2d1 = {
- .clk = {
- .name = "mout_g2d1",
- },
- .sources = &clkset_mout_g2d1,
- .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 4, .size = 1 },
-};
-
-static struct clk *clkset_mout_g2d_list[] = {
- [0] = &clk_mout_g2d0.clk,
- [1] = &clk_mout_g2d1.clk,
-};
-
-static struct clksrc_sources clkset_mout_g2d = {
- .sources = clkset_mout_g2d_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_g2d_list),
-};
-
-static struct clk *clkset_mout_mfc0_list[] = {
- [0] = &clk_mout_mpll.clk,
- [1] = &clk_sclk_apll.clk,
-};
-
-static struct clksrc_sources clkset_mout_mfc0 = {
- .sources = clkset_mout_mfc0_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_mfc0_list),
-};
-
-static struct clksrc_clk clk_mout_mfc0 = {
- .clk = {
- .name = "mout_mfc0",
- },
- .sources = &clkset_mout_mfc0,
- .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 0, .size = 1 },
-};
-
-static struct clk *clkset_mout_mfc1_list[] = {
- [0] = &clk_mout_epll.clk,
- [1] = &clk_sclk_vpll.clk,
-};
-
-static struct clksrc_sources clkset_mout_mfc1 = {
- .sources = clkset_mout_mfc1_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_mfc1_list),
-};
-
-static struct clksrc_clk clk_mout_mfc1 = {
- .clk = {
- .name = "mout_mfc1",
- },
- .sources = &clkset_mout_mfc1,
- .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 4, .size = 1 },
-};
-
-static struct clk *clkset_mout_mfc_list[] = {
- [0] = &clk_mout_mfc0.clk,
- [1] = &clk_mout_mfc1.clk,
-};
-
-static struct clksrc_sources clkset_mout_mfc = {
- .sources = clkset_mout_mfc_list,
- .nr_sources = ARRAY_SIZE(clkset_mout_mfc_list),
-};
-
-static struct clk *clkset_sclk_dac_list[] = {
- [0] = &clk_sclk_vpll.clk,
- [1] = &clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources clkset_sclk_dac = {
- .sources = clkset_sclk_dac_list,
- .nr_sources = ARRAY_SIZE(clkset_sclk_dac_list),
-};
-
-static struct clksrc_clk clk_sclk_dac = {
- .clk = {
- .name = "sclk_dac",
- .enable = exynos4_clksrc_mask_tv_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &clkset_sclk_dac,
- .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 8, .size = 1 },
-};
-
-static struct clksrc_clk clk_sclk_pixel = {
- .clk = {
- .name = "sclk_pixel",
- .parent = &clk_sclk_vpll.clk,
- },
- .reg_div = { .reg = S5P_CLKDIV_TV, .shift = 0, .size = 4 },
-};
-
-static struct clk *clkset_sclk_hdmi_list[] = {
- [0] = &clk_sclk_pixel.clk,
- [1] = &clk_sclk_hdmiphy,
-};
-
-static struct clksrc_sources clkset_sclk_hdmi = {
- .sources = clkset_sclk_hdmi_list,
- .nr_sources = ARRAY_SIZE(clkset_sclk_hdmi_list),
-};
-
-static struct clksrc_clk clk_sclk_hdmi = {
- .clk = {
- .name = "sclk_hdmi",
- .enable = exynos4_clksrc_mask_tv_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_sclk_hdmi,
- .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 0, .size = 1 },
-};
-
-static struct clk *clkset_sclk_mixer_list[] = {
- [0] = &clk_sclk_dac.clk,
- [1] = &clk_sclk_hdmi.clk,
-};
-
-static struct clksrc_sources clkset_sclk_mixer = {
- .sources = clkset_sclk_mixer_list,
- .nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list),
-};
-
-static struct clksrc_clk clk_sclk_mixer = {
- .clk = {
- .name = "sclk_mixer",
- .enable = exynos4_clksrc_mask_tv_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &clkset_sclk_mixer,
- .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 4, .size = 1 },
-};
-
-static struct clksrc_clk *sclk_tv[] = {
- &clk_sclk_dac,
- &clk_sclk_pixel,
- &clk_sclk_hdmi,
- &clk_sclk_mixer,
-};
-
-static struct clksrc_clk clk_dout_mmc0 = {
- .clk = {
- .name = "dout_mmc0",
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_dout_mmc1 = {
- .clk = {
- .name = "dout_mmc1",
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 4, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_dout_mmc2 = {
- .clk = {
- .name = "dout_mmc2",
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 8, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_dout_mmc3 = {
- .clk = {
- .name = "dout_mmc3",
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 12, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_dout_mmc4 = {
- .clk = {
- .name = "dout_mmc4",
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 16, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clksrcs[] = {
- {
- .clk = {
- .name = "sclk_pwm",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 24, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL3, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_csis",
- .devname = "s5p-mipi-csis.0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 24, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_csis",
- .devname = "s5p-mipi-csis.1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 28),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 28, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 16),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 16, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_cam1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 20, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.0",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.1",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 4, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.2",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 8, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimc",
- .devname = "exynos4-fimc.3",
- .enable = exynos4_clksrc_mask_cam_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_CAM, .shift = 12, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimd",
- .devname = "exynos4-fb.0",
- .enable = exynos4_clksrc_mask_lcd0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_LCD0, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_fimg2d",
- },
- .sources = &clkset_mout_g2d,
- .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mfc",
- .devname = "s5p-mfc",
- },
- .sources = &clkset_mout_mfc,
- .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 8, .size = 1 },
- .reg_div = { .reg = S5P_CLKDIV_MFC, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_dwmmc",
- .parent = &clk_dout_mmc4.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 16),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS3, .shift = 8, .size = 8 },
- }
-};
-
-static struct clksrc_clk clk_sclk_uart0 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.0",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_uart1 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.1",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_uart2 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.2",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_uart3 = {
- .clk = {
- .name = "uclk1",
- .devname = "exynos4210-uart.3",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_mmc0 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_dout_mmc0.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 0),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk clk_sclk_mmc1 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_dout_mmc1.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 4),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk clk_sclk_mmc2 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_dout_mmc2.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 8),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 },
-};
-
-static struct clksrc_clk clk_sclk_mmc3 = {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.3",
- .parent = &clk_dout_mmc3.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 12),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 },
-};
-
-static struct clksrc_clk clk_sclk_spi0 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 16),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi1 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 },
-};
-
-static struct clksrc_clk clk_sclk_spi2 = {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.2",
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 },
-};
-
-/* Clock initialization code */
-static struct clksrc_clk *sysclks[] = {
- &clk_mout_apll,
- &clk_sclk_apll,
- &clk_mout_epll,
- &clk_mout_mpll,
- &clk_moutcore,
- &clk_coreclk,
- &clk_armclk,
- &clk_aclk_corem0,
- &clk_aclk_cores,
- &clk_aclk_corem1,
- &clk_periphclk,
- &clk_mout_corebus,
- &clk_sclk_dmc,
- &clk_aclk_cored,
- &clk_aclk_corep,
- &clk_aclk_acp,
- &clk_pclk_acp,
- &clk_vpllsrc,
- &clk_sclk_vpll,
- &clk_aclk_200,
- &clk_aclk_100,
- &clk_aclk_160,
- &clk_aclk_133,
- &clk_dout_mmc0,
- &clk_dout_mmc1,
- &clk_dout_mmc2,
- &clk_dout_mmc3,
- &clk_dout_mmc4,
- &clk_mout_mfc0,
- &clk_mout_mfc1,
-};
-
-static struct clk *clk_cdev[] = {
- &clk_pdma0,
- &clk_pdma1,
-};
-
-static struct clksrc_clk *clksrc_cdev[] = {
- &clk_sclk_uart0,
- &clk_sclk_uart1,
- &clk_sclk_uart2,
- &clk_sclk_uart3,
- &clk_sclk_mmc0,
- &clk_sclk_mmc1,
- &clk_sclk_mmc2,
- &clk_sclk_mmc3,
- &clk_sclk_spi0,
- &clk_sclk_spi1,
- &clk_sclk_spi2,
-
-};
-
-static struct clk_lookup exynos4_clk_lookup[] = {
- CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &clk_sclk_uart0.clk),
- CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &clk_sclk_uart1.clk),
- CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &clk_sclk_uart2.clk),
- CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &clk_sclk_uart3.clk),
- CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
- CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
- CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
- CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk),
- CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
- CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
- CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &clk_sclk_spi0.clk),
- CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &clk_sclk_spi1.clk),
- CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &clk_sclk_spi2.clk),
-};
-
-static int xtal_rate;
-
-static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
-{
- if (soc_is_exynos4210())
- return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0),
- pll_4508);
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0));
- else
- return 0;
-}
-
-static struct clk_ops exynos4_fout_apll_ops = {
- .get_rate = exynos4_fout_apll_get_rate,
-};
-
-static u32 vpll_div[][8] = {
- { 54000000, 3, 53, 3, 1024, 0, 17, 0 },
- { 108000000, 3, 53, 2, 1024, 0, 17, 0 },
-};
-
-static unsigned long exynos4_vpll_get_rate(struct clk *clk)
-{
- return clk->rate;
-}
-
-static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int vpll_con0, vpll_con1 = 0;
- unsigned int i;
-
- /* Return if nothing changed */
- if (clk->rate == rate)
- return 0;
-
- vpll_con0 = __raw_readl(S5P_VPLL_CON0);
- vpll_con0 &= ~(0x1 << 27 | \
- PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
- PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
- PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
-
- vpll_con1 = __raw_readl(S5P_VPLL_CON1);
- vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \
- PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \
- PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT);
-
- for (i = 0; i < ARRAY_SIZE(vpll_div); i++) {
- if (vpll_div[i][0] == rate) {
- vpll_con0 |= vpll_div[i][1] << PLL46XX_PDIV_SHIFT;
- vpll_con0 |= vpll_div[i][2] << PLL46XX_MDIV_SHIFT;
- vpll_con0 |= vpll_div[i][3] << PLL46XX_SDIV_SHIFT;
- vpll_con1 |= vpll_div[i][4] << PLL46XX_KDIV_SHIFT;
- vpll_con1 |= vpll_div[i][5] << PLL46XX_MFR_SHIFT;
- vpll_con1 |= vpll_div[i][6] << PLL46XX_MRR_SHIFT;
- vpll_con0 |= vpll_div[i][7] << 27;
- break;
- }
- }
-
- if (i == ARRAY_SIZE(vpll_div)) {
- printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n",
- __func__);
- return -EINVAL;
- }
-
- __raw_writel(vpll_con0, S5P_VPLL_CON0);
- __raw_writel(vpll_con1, S5P_VPLL_CON1);
-
- /* Wait for VPLL lock */
- while (!(__raw_readl(S5P_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT)))
- continue;
-
- clk->rate = rate;
- return 0;
-}
-
-static struct clk_ops exynos4_vpll_ops = {
- .get_rate = exynos4_vpll_get_rate,
- .set_rate = exynos4_vpll_set_rate,
-};
-
-void __init_or_cpufreq exynos4_setup_clocks(void)
-{
- struct clk *xtal_clk;
- unsigned long apll = 0;
- unsigned long mpll = 0;
- unsigned long epll = 0;
- unsigned long vpll = 0;
- unsigned long vpllsrc;
- unsigned long xtal;
- unsigned long armclk;
- unsigned long sclk_dmc;
- unsigned long aclk_200;
- unsigned long aclk_100;
- unsigned long aclk_160;
- unsigned long aclk_133;
- unsigned int ptr;
-
- printk(KERN_DEBUG "%s: registering clocks\n", __func__);
-
- xtal_clk = clk_get(NULL, "xtal");
- BUG_ON(IS_ERR(xtal_clk));
-
- xtal = clk_get_rate(xtal_clk);
-
- xtal_rate = xtal;
-
- clk_put(xtal_clk);
-
- printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
-
- if (soc_is_exynos4210()) {
- apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0),
- pll_4508);
- mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0),
- pll_4508);
- epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
- __raw_readl(S5P_EPLL_CON1), pll_4600);
-
- vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
- vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
- __raw_readl(S5P_VPLL_CON1), pll_4650c);
- } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
- apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0));
- mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0));
- epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0),
- __raw_readl(S5P_EPLL_CON1));
-
- vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
- vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
- __raw_readl(S5P_VPLL_CON1));
- } else {
- /* nothing */
- }
-
- clk_fout_apll.ops = &exynos4_fout_apll_ops;
- clk_fout_mpll.rate = mpll;
- clk_fout_epll.rate = epll;
- clk_fout_vpll.ops = &exynos4_vpll_ops;
- clk_fout_vpll.rate = vpll;
-
- printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld",
- apll, mpll, epll, vpll);
-
- armclk = clk_get_rate(&clk_armclk.clk);
- sclk_dmc = clk_get_rate(&clk_sclk_dmc.clk);
-
- aclk_200 = clk_get_rate(&clk_aclk_200.clk);
- aclk_100 = clk_get_rate(&clk_aclk_100.clk);
- aclk_160 = clk_get_rate(&clk_aclk_160.clk);
- aclk_133 = clk_get_rate(&clk_aclk_133.clk);
-
- printk(KERN_INFO "EXYNOS4: ARMCLK=%ld, DMC=%ld, ACLK200=%ld\n"
- "ACLK100=%ld, ACLK160=%ld, ACLK133=%ld\n",
- armclk, sclk_dmc, aclk_200,
- aclk_100, aclk_160, aclk_133);
-
- clk_f.rate = armclk;
- clk_h.rate = sclk_dmc;
- clk_p.rate = aclk_100;
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
- s3c_set_clksrc(&clksrcs[ptr], true);
-}
-
-static struct clk *clks[] __initdata = {
- &clk_sclk_hdmi27m,
- &clk_sclk_hdmiphy,
- &clk_sclk_usbphy0,
- &clk_sclk_usbphy1,
-};
-
-#ifdef CONFIG_PM_SLEEP
-static int exynos4_clock_suspend(void)
-{
- s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
- return 0;
-}
-
-static void exynos4_clock_resume(void)
-{
- s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
-}
-
-#else
-#define exynos4_clock_suspend NULL
-#define exynos4_clock_resume NULL
-#endif
-
-struct syscore_ops exynos4_clock_syscore_ops = {
- .suspend = exynos4_clock_suspend,
- .resume = exynos4_clock_resume,
-};
-
-void __init exynos4_register_clocks(void)
-{
- int ptr;
-
- s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
- for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
- s3c_register_clksrc(sysclks[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
- s3c_register_clksrc(sclk_tv[ptr], 1);
-
- for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
- s3c_register_clksrc(clksrc_cdev[ptr], 1);
-
- s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
- s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
- s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
- for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
- s3c_disable_clocks(clk_cdev[ptr], 1);
-
- s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
- clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup));
-
- register_syscore_ops(&exynos4_clock_syscore_ops);
- s3c24xx_register_clock(&dummy_apb_pclk);
-
- s3c_pwmclk_init();
-}
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index c59e188..66742e9 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -26,10 +26,12 @@
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
+#include <asm/cacheflush.h>
#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
#include <mach/regs-gpio.h>
+#include <mach/pmu.h>
#include <plat/cpu.h>
#include <plat/clock.h>
@@ -45,10 +47,20 @@
#include <plat/regs-serial.h>
#include "common.h"
+#define L2_AUX_VAL 0x7C470001
+#define L2_AUX_MASK 0xC200ffff
static const char name_exynos4210[] = "EXYNOS4210";
static const char name_exynos4212[] = "EXYNOS4212";
static const char name_exynos4412[] = "EXYNOS4412";
+static const char name_exynos5250[] = "EXYNOS5250";
+
+static void exynos4_map_io(void);
+static void exynos5_map_io(void);
+static void exynos4_init_clocks(int xtal);
+static void exynos5_init_clocks(int xtal);
+static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+static int exynos_init(void);
static struct cpu_table cpu_ids[] __initdata = {
{
@@ -56,7 +68,7 @@
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
+ .init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos4210,
}, {
@@ -64,7 +76,7 @@
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
+ .init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos4212,
}, {
@@ -72,9 +84,17 @@
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
+ .init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos4412,
+ }, {
+ .idcode = EXYNOS5250_SOC_ID,
+ .idmask = EXYNOS5_SOC_MASK,
+ .map_io = exynos5_map_io,
+ .init_clocks = exynos5_init_clocks,
+ .init_uarts = exynos_init_uarts,
+ .init = exynos_init,
+ .name = name_exynos5250,
},
};
@@ -83,10 +103,14 @@
static struct map_desc exynos_iodesc[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_CHIPID,
- .pfn = __phys_to_pfn(EXYNOS4_PA_CHIPID),
+ .pfn = __phys_to_pfn(EXYNOS_PA_CHIPID),
.length = SZ_4K,
.type = MT_DEVICE,
- }, {
+ },
+};
+
+static struct map_desc exynos4_iodesc[] __initdata = {
+ {
.virtual = (unsigned long)S3C_VA_SYS,
.pfn = __phys_to_pfn(EXYNOS4_PA_SYSCON),
.length = SZ_64K,
@@ -136,11 +160,7 @@
.pfn = __phys_to_pfn(EXYNOS4_PA_UART),
.length = SZ_512K,
.type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc[] __initdata = {
- {
+ }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
@@ -173,7 +193,12 @@
}, {
.virtual = (unsigned long)S5P_VA_DMC0,
.pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
- .length = SZ_4K,
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_DMC1,
+ .pfn = __phys_to_pfn(EXYNOS4_PA_DMC1),
+ .length = SZ_64K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S3C_VA_USB_HSPHY,
@@ -201,19 +226,80 @@
},
};
-static void exynos_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
+static struct map_desc exynos5_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SYSTIMER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_CMU,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_CMU),
+ .length = 144 * SZ_1K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_PMU,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_PMU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_COMBINER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_UART),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_CPU,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_CPU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_DIST,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ },
+};
void exynos4_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
}
+void exynos5_restart(char mode, const char *cmd)
+{
+ __raw_writel(0x1, EXYNOS_SWRESET);
+}
+
/*
* exynos_map_io
*
@@ -233,7 +319,7 @@
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
-void __init exynos4_map_io(void)
+static void __init exynos4_map_io(void)
{
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
@@ -264,7 +350,22 @@
s5p_hdmi_setname("exynos4-hdmi");
}
-void __init exynos4_init_clocks(int xtal)
+static void __init exynos5_map_io(void)
+{
+ iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
+
+ s3c_device_i2c0.resource[0].start = EXYNOS5_PA_IIC(0);
+ s3c_device_i2c0.resource[0].end = EXYNOS5_PA_IIC(0) + SZ_4K - 1;
+ s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
+ s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC;
+
+ /* The I2C bus controllers are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+ s3c_i2c2_setname("s3c2440-i2c");
+}
+
+static void __init exynos4_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
@@ -280,6 +381,17 @@
exynos4_setup_clocks();
}
+static void __init exynos5_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+
+ exynos5_register_clocks();
+ exynos5_setup_clocks();
+}
+
#define COMBINER_ENABLE_SET 0x0
#define COMBINER_ENABLE_CLEAR 0x4
#define COMBINER_INT_STATUS 0xC
@@ -353,7 +465,14 @@
static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
{
- if (combiner_nr >= MAX_COMBINER_NR)
+ unsigned int max_nr;
+
+ if (soc_is_exynos5250())
+ max_nr = EXYNOS5_MAX_COMBINER_NR;
+ else
+ max_nr = EXYNOS4_MAX_COMBINER_NR;
+
+ if (combiner_nr >= max_nr)
BUG();
if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
BUG();
@@ -364,8 +483,14 @@
unsigned int irq_start)
{
unsigned int i;
+ unsigned int max_nr;
- if (combiner_nr >= MAX_COMBINER_NR)
+ if (soc_is_exynos5250())
+ max_nr = EXYNOS5_MAX_COMBINER_NR;
+ else
+ max_nr = EXYNOS4_MAX_COMBINER_NR;
+
+ if (combiner_nr >= max_nr)
BUG();
combiner_data[combiner_nr].base = base;
@@ -408,7 +533,7 @@
of_irq_init(exynos4_dt_irq_match);
#endif
- for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+ for (irq = 0; irq < EXYNOS4_MAX_COMBINER_NR; irq++) {
combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
COMBINER_IRQ(irq, 0));
@@ -423,60 +548,144 @@
s5p_init_irq(NULL, 0);
}
+void __init exynos5_init_irq(void)
+{
+ int irq;
+
+ gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+
+ for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
+ combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
+ COMBINER_IRQ(irq, 0));
+ combiner_cascade_irq(irq, IRQ_SPI(irq));
+ }
+
+ /*
+ * The parameters of s5p_init_irq() are for VIC init.
+ * Theses parameters should be NULL and 0 because EXYNOS4
+ * uses GIC instead of VIC.
+ */
+ s5p_init_irq(NULL, 0);
+}
+
struct bus_type exynos4_subsys = {
.name = "exynos4-core",
.dev_name = "exynos4-core",
};
+struct bus_type exynos5_subsys = {
+ .name = "exynos5-core",
+ .dev_name = "exynos5-core",
+};
+
static struct device exynos4_dev = {
.bus = &exynos4_subsys,
};
-static int __init exynos4_core_init(void)
+static struct device exynos5_dev = {
+ .bus = &exynos5_subsys,
+};
+
+static int __init exynos_core_init(void)
{
- return subsys_system_register(&exynos4_subsys, NULL);
+ if (soc_is_exynos5250())
+ return subsys_system_register(&exynos5_subsys, NULL);
+ else
+ return subsys_system_register(&exynos4_subsys, NULL);
}
-core_initcall(exynos4_core_init);
+core_initcall(exynos_core_init);
#ifdef CONFIG_CACHE_L2X0
static int __init exynos4_l2x0_cache_init(void)
{
- /* TAG, Data Latency Control: 2cycle */
- __raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+ if (soc_is_exynos5250())
+ return 0;
- if (soc_is_exynos4210())
- __raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
- else if (soc_is_exynos4212() || soc_is_exynos4412())
- __raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+ int ret;
+ ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
+ if (!ret) {
+ l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
+ clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
+ return 0;
+ }
- /* L2X0 Prefetch Control */
- __raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+ if (!(__raw_readl(S5P_VA_L2CC + L2X0_CTRL) & 0x1)) {
+ l2x0_saved_regs.phy_base = EXYNOS4_PA_L2CC;
+ /* TAG, Data Latency Control: 2 cycles */
+ l2x0_saved_regs.tag_latency = 0x110;
- /* L2X0 Power Control */
- __raw_writel(L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN,
- S5P_VA_L2CC + L2X0_POWER_CTRL);
+ if (soc_is_exynos4212() || soc_is_exynos4412())
+ l2x0_saved_regs.data_latency = 0x120;
+ else
+ l2x0_saved_regs.data_latency = 0x110;
- l2x0_init(S5P_VA_L2CC, 0x7C470001, 0xC200ffff);
+ l2x0_saved_regs.prefetch_ctrl = 0x30000007;
+ l2x0_saved_regs.pwr_ctrl =
+ (L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN);
+ l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
+
+ __raw_writel(l2x0_saved_regs.tag_latency,
+ S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
+ __raw_writel(l2x0_saved_regs.data_latency,
+ S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+ /* L2X0 Prefetch Control */
+ __raw_writel(l2x0_saved_regs.prefetch_ctrl,
+ S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
+
+ /* L2X0 Power Control */
+ __raw_writel(l2x0_saved_regs.pwr_ctrl,
+ S5P_VA_L2CC + L2X0_POWER_CTRL);
+
+ clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
+ clean_dcache_area(&l2x0_saved_regs, sizeof(struct l2x0_regs));
+ }
+
+ l2x0_init(S5P_VA_L2CC, L2_AUX_VAL, L2_AUX_MASK);
return 0;
}
-
early_initcall(exynos4_l2x0_cache_init);
#endif
-int __init exynos_init(void)
+static int __init exynos5_l2_cache_init(void)
+{
+ unsigned int val;
+
+ if (!soc_is_exynos5250())
+ return 0;
+
+ asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
+ "bic %0, %0, #(1 << 2)\n" /* cache disable */
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ "mrc p15, 1, %0, c9, c0, 2\n"
+ : "=r"(val));
+
+ val |= (1 << 9) | (1 << 5) | (2 << 6) | (2 << 0);
+
+ asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val));
+ asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
+ "orr %0, %0, #(1 << 2)\n" /* cache enable */
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ : : "r"(val));
+
+ return 0;
+}
+early_initcall(exynos5_l2_cache_init);
+
+static int __init exynos_init(void)
{
printk(KERN_INFO "EXYNOS: Initializing architecture\n");
- /* set idle function */
- pm_idle = exynos_idle;
-
- return device_register(&exynos4_dev);
+ if (soc_is_exynos5250())
+ return device_register(&exynos5_dev);
+ else
+ return device_register(&exynos4_dev);
}
/* uart registration process */
-void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
struct s3c2410_uartcfg *tcfg = cfg;
u32 ucnt;
@@ -484,69 +693,138 @@
for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
tcfg->has_fracval = 1;
- s3c24xx_init_uartdevs("exynos4210-uart", s5p_uart_resources, cfg, no);
+ if (soc_is_exynos5250())
+ s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no);
+ else
+ s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
}
+static void __iomem *exynos_eint_base;
+
static DEFINE_SPINLOCK(eint_lock);
static unsigned int eint0_15_data[16];
-static unsigned int exynos4_get_irq_nr(unsigned int number)
+static inline int exynos4_irq_to_gpio(unsigned int irq)
{
- u32 ret = 0;
+ if (irq < IRQ_EINT(0))
+ return -EINVAL;
- switch (number) {
- case 0 ... 3:
- ret = (number + IRQ_EINT0);
- break;
- case 4 ... 7:
- ret = (number + (IRQ_EINT4 - 4));
- break;
- case 8 ... 15:
- ret = (number + (IRQ_EINT8 - 8));
- break;
- default:
- printk(KERN_ERR "number available : %d\n", number);
- }
+ irq -= IRQ_EINT(0);
+ if (irq < 8)
+ return EXYNOS4_GPX0(irq);
- return ret;
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS4_GPX1(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS4_GPX2(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS4_GPX3(irq);
+
+ return -EINVAL;
}
-static inline void exynos4_irq_eint_mask(struct irq_data *data)
+static inline int exynos5_irq_to_gpio(unsigned int irq)
+{
+ if (irq < IRQ_EINT(0))
+ return -EINVAL;
+
+ irq -= IRQ_EINT(0);
+ if (irq < 8)
+ return EXYNOS5_GPX0(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS5_GPX1(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS5_GPX2(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS5_GPX3(irq);
+
+ return -EINVAL;
+}
+
+static unsigned int exynos4_eint0_15_src_int[16] = {
+ EXYNOS4_IRQ_EINT0,
+ EXYNOS4_IRQ_EINT1,
+ EXYNOS4_IRQ_EINT2,
+ EXYNOS4_IRQ_EINT3,
+ EXYNOS4_IRQ_EINT4,
+ EXYNOS4_IRQ_EINT5,
+ EXYNOS4_IRQ_EINT6,
+ EXYNOS4_IRQ_EINT7,
+ EXYNOS4_IRQ_EINT8,
+ EXYNOS4_IRQ_EINT9,
+ EXYNOS4_IRQ_EINT10,
+ EXYNOS4_IRQ_EINT11,
+ EXYNOS4_IRQ_EINT12,
+ EXYNOS4_IRQ_EINT13,
+ EXYNOS4_IRQ_EINT14,
+ EXYNOS4_IRQ_EINT15,
+};
+
+static unsigned int exynos5_eint0_15_src_int[16] = {
+ EXYNOS5_IRQ_EINT0,
+ EXYNOS5_IRQ_EINT1,
+ EXYNOS5_IRQ_EINT2,
+ EXYNOS5_IRQ_EINT3,
+ EXYNOS5_IRQ_EINT4,
+ EXYNOS5_IRQ_EINT5,
+ EXYNOS5_IRQ_EINT6,
+ EXYNOS5_IRQ_EINT7,
+ EXYNOS5_IRQ_EINT8,
+ EXYNOS5_IRQ_EINT9,
+ EXYNOS5_IRQ_EINT10,
+ EXYNOS5_IRQ_EINT11,
+ EXYNOS5_IRQ_EINT12,
+ EXYNOS5_IRQ_EINT13,
+ EXYNOS5_IRQ_EINT14,
+ EXYNOS5_IRQ_EINT15,
+};
+static inline void exynos_irq_eint_mask(struct irq_data *data)
{
u32 mask;
spin_lock(&eint_lock);
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask |= eint_irq_to_bit(data->irq);
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq));
+ mask |= EINT_OFFSET_BIT(data->irq);
+ __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq));
spin_unlock(&eint_lock);
}
-static void exynos4_irq_eint_unmask(struct irq_data *data)
+static void exynos_irq_eint_unmask(struct irq_data *data)
{
u32 mask;
spin_lock(&eint_lock);
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask &= ~(eint_irq_to_bit(data->irq));
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq));
+ mask &= ~(EINT_OFFSET_BIT(data->irq));
+ __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq));
spin_unlock(&eint_lock);
}
-static inline void exynos4_irq_eint_ack(struct irq_data *data)
+static inline void exynos_irq_eint_ack(struct irq_data *data)
{
- __raw_writel(eint_irq_to_bit(data->irq),
- S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+ __raw_writel(EINT_OFFSET_BIT(data->irq),
+ EINT_PEND(exynos_eint_base, data->irq));
}
-static void exynos4_irq_eint_maskack(struct irq_data *data)
+static void exynos_irq_eint_maskack(struct irq_data *data)
{
- exynos4_irq_eint_mask(data);
- exynos4_irq_eint_ack(data);
+ exynos_irq_eint_mask(data);
+ exynos_irq_eint_ack(data);
}
-static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
+static int exynos_irq_eint_set_type(struct irq_data *data, unsigned int type)
{
int offs = EINT_OFFSET(data->irq);
int shift;
@@ -583,39 +861,27 @@
mask = 0x7 << shift;
spin_lock(&eint_lock);
- ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
+ ctrl = __raw_readl(EINT_CON(exynos_eint_base, data->irq));
ctrl &= ~mask;
ctrl |= newvalue << shift;
- __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
+ __raw_writel(ctrl, EINT_CON(exynos_eint_base, data->irq));
spin_unlock(&eint_lock);
- switch (offs) {
- case 0 ... 7:
- s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
- break;
- case 8 ... 15:
- s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
- break;
- case 16 ... 23:
- s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
- break;
- case 24 ... 31:
- s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
- break;
- default:
- printk(KERN_ERR "No such irq number %d", offs);
- }
+ if (soc_is_exynos5250())
+ s3c_gpio_cfgpin(exynos5_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf));
+ else
+ s3c_gpio_cfgpin(exynos4_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf));
return 0;
}
-static struct irq_chip exynos4_irq_eint = {
- .name = "exynos4-eint",
- .irq_mask = exynos4_irq_eint_mask,
- .irq_unmask = exynos4_irq_eint_unmask,
- .irq_mask_ack = exynos4_irq_eint_maskack,
- .irq_ack = exynos4_irq_eint_ack,
- .irq_set_type = exynos4_irq_eint_set_type,
+static struct irq_chip exynos_irq_eint = {
+ .name = "exynos-eint",
+ .irq_mask = exynos_irq_eint_mask,
+ .irq_unmask = exynos_irq_eint_unmask,
+ .irq_mask_ack = exynos_irq_eint_maskack,
+ .irq_ack = exynos_irq_eint_ack,
+ .irq_set_type = exynos_irq_eint_set_type,
#ifdef CONFIG_PM
.irq_set_wake = s3c_irqext_wake,
#endif
@@ -630,12 +896,12 @@
*
* Each EINT pend/mask registers handle eight of them.
*/
-static inline void exynos4_irq_demux_eint(unsigned int start)
+static inline void exynos_irq_demux_eint(unsigned int start)
{
unsigned int irq;
- u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
- u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+ u32 status = __raw_readl(EINT_PEND(exynos_eint_base, start));
+ u32 mask = __raw_readl(EINT_MASK(exynos_eint_base, start));
status &= ~mask;
status &= 0xff;
@@ -647,16 +913,16 @@
}
}
-static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_get_chip(irq);
chained_irq_enter(chip, desc);
- exynos4_irq_demux_eint(IRQ_EINT(16));
- exynos4_irq_demux_eint(IRQ_EINT(24));
+ exynos_irq_demux_eint(IRQ_EINT(16));
+ exynos_irq_demux_eint(IRQ_EINT(24));
chained_irq_exit(chip, desc);
}
-static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
{
u32 *irq_data = irq_get_handler_data(irq);
struct irq_chip *chip = irq_get_chip(irq);
@@ -673,27 +939,44 @@
chained_irq_exit(chip, desc);
}
-int __init exynos4_init_irq_eint(void)
+static int __init exynos_init_irq_eint(void)
{
int irq;
+ if (soc_is_exynos5250())
+ exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
+ else
+ exynos_eint_base = ioremap(EXYNOS4_PA_GPIO2, SZ_4K);
+
+ if (exynos_eint_base == NULL) {
+ pr_err("unable to ioremap for EINT base address\n");
+ return -ENOMEM;
+ }
+
for (irq = 0 ; irq <= 31 ; irq++) {
- irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
+ irq_set_chip_and_handler(IRQ_EINT(irq), &exynos_irq_eint,
handle_level_irq);
set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
}
- irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
+ irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos_irq_demux_eint16_31);
for (irq = 0 ; irq <= 15 ; irq++) {
eint0_15_data[irq] = IRQ_EINT(irq);
- irq_set_handler_data(exynos4_get_irq_nr(irq),
- &eint0_15_data[irq]);
- irq_set_chained_handler(exynos4_get_irq_nr(irq),
- exynos4_irq_eint0_15);
+ if (soc_is_exynos5250()) {
+ irq_set_handler_data(exynos5_eint0_15_src_int[irq],
+ &eint0_15_data[irq]);
+ irq_set_chained_handler(exynos5_eint0_15_src_int[irq],
+ exynos_irq_eint0_15);
+ } else {
+ irq_set_handler_data(exynos4_eint0_15_src_int[irq],
+ &eint0_15_data[irq]);
+ irq_set_chained_handler(exynos4_eint0_15_src_int[irq],
+ exynos_irq_eint0_15);
+ }
}
return 0;
}
-arch_initcall(exynos4_init_irq_eint);
+arch_initcall(exynos_init_irq_eint);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 1ac49de..677b546 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -12,30 +12,44 @@
#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
+extern struct sys_timer exynos4_timer;
+
void exynos_init_io(struct map_desc *mach_desc, int size);
void exynos4_init_irq(void);
+void exynos5_init_irq(void);
+void exynos4_restart(char mode, const char *cmd);
+void exynos5_restart(char mode, const char *cmd);
+#ifdef CONFIG_ARCH_EXYNOS4
void exynos4_register_clocks(void);
void exynos4_setup_clocks(void);
-void exynos4210_register_clocks(void);
-void exynos4212_register_clocks(void);
+#else
+#define exynos4_register_clocks()
+#define exynos4_setup_clocks()
+#endif
-void exynos4_restart(char mode, const char *cmd);
-
-extern struct sys_timer exynos4_timer;
-
-#ifdef CONFIG_ARCH_EXYNOS
-extern int exynos_init(void);
-extern void exynos4_map_io(void);
-extern void exynos4_init_clocks(int xtal);
-extern void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+#ifdef CONFIG_ARCH_EXYNOS5
+void exynos5_register_clocks(void);
+void exynos5_setup_clocks(void);
#else
-#define exynos4_init_clocks NULL
-#define exynos4_init_uarts NULL
-#define exynos4_map_io NULL
-#define exynos_init NULL
+#define exynos5_register_clocks()
+#define exynos5_setup_clocks()
+#endif
+
+#ifdef CONFIG_CPU_EXYNOS4210
+void exynos4210_register_clocks(void);
+
+#else
+#define exynos4210_register_clocks()
+#endif
+
+#ifdef CONFIG_SOC_EXYNOS4212
+void exynos4212_register_clocks(void);
+
+#else
+#define exynos4212_register_clocks()
#endif
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 4ebb382..33ab4e7 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -11,25 +11,53 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/cpuidle.h>
+#include <linux/cpu_pm.h>
#include <linux/io.h>
#include <linux/export.h>
#include <linux/time.h>
#include <asm/proc-fns.h>
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
+#include <asm/unified.h>
+#include <mach/regs-pmu.h>
+#include <mach/pmu.h>
+
+#include <plat/cpu.h>
+
+#define REG_DIRECTGO_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \
+ S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+ (S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
+#define REG_DIRECTGO_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
+ S5P_INFORM6 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
+ (S5P_VA_SYSRAM + 0x20) : S5P_INFORM1))
+
+#define S5P_CHECK_AFTR 0xFCBA0D10
static int exynos4_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
int index);
+static int exynos4_enter_lowpower(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index);
-static struct cpuidle_state exynos4_cpuidle_set[] = {
+static struct cpuidle_state exynos4_cpuidle_set[] __initdata = {
[0] = {
.enter = exynos4_enter_idle,
.exit_latency = 1,
.target_residency = 100000,
.flags = CPUIDLE_FLAG_TIME_VALID,
- .name = "IDLE",
+ .name = "C0",
.desc = "ARM clock gating(WFI)",
},
+ [1] = {
+ .enter = exynos4_enter_lowpower,
+ .exit_latency = 300,
+ .target_residency = 100000,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "C1",
+ .desc = "ARM power down",
+ },
};
static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device);
@@ -39,9 +67,102 @@
.owner = THIS_MODULE,
};
+/* Ext-GIC nIRQ/nFIQ is the only wakeup source in AFTR */
+static void exynos4_set_wakeupmask(void)
+{
+ __raw_writel(0x0000ff3e, S5P_WAKEUP_MASK);
+}
+
+static unsigned int g_pwr_ctrl, g_diag_reg;
+
+static void save_cpu_arch_register(void)
+{
+ /*read power control register*/
+ asm("mrc p15, 0, %0, c15, c0, 0" : "=r"(g_pwr_ctrl) : : "cc");
+ /*read diagnostic register*/
+ asm("mrc p15, 0, %0, c15, c0, 1" : "=r"(g_diag_reg) : : "cc");
+ return;
+}
+
+static void restore_cpu_arch_register(void)
+{
+ /*write power control register*/
+ asm("mcr p15, 0, %0, c15, c0, 0" : : "r"(g_pwr_ctrl) : "cc");
+ /*write diagnostic register*/
+ asm("mcr p15, 0, %0, c15, c0, 1" : : "r"(g_diag_reg) : "cc");
+ return;
+}
+
+static int idle_finisher(unsigned long flags)
+{
+ cpu_do_idle();
+ return 1;
+}
+
+static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ struct timeval before, after;
+ int idle_time;
+ unsigned long tmp;
+
+ local_irq_disable();
+ do_gettimeofday(&before);
+
+ exynos4_set_wakeupmask();
+
+ /* Set value of power down register for aftr mode */
+ exynos4_sys_powerdown_conf(SYS_AFTR);
+
+ __raw_writel(virt_to_phys(s3c_cpu_resume), REG_DIRECTGO_ADDR);
+ __raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);
+
+ save_cpu_arch_register();
+
+ /* Setting Central Sequence Register for power down mode */
+ tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+ tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
+ __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+
+ cpu_pm_enter();
+ cpu_suspend(0, idle_finisher);
+
+#ifdef CONFIG_SMP
+ scu_enable(S5P_VA_SCU);
+#endif
+ cpu_pm_exit();
+
+ restore_cpu_arch_register();
+
+ /*
+ * If PMU failed while entering sleep mode, WFI will be
+ * ignored by PMU and then exiting cpu_do_idle().
+ * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically
+ * in this situation.
+ */
+ tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
+ if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) {
+ tmp |= S5P_CENTRAL_LOWPWR_CFG;
+ __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+ }
+
+ /* Clear wakeup state register */
+ __raw_writel(0x0, S5P_WAKEUP_STAT);
+
+ do_gettimeofday(&after);
+
+ local_irq_enable();
+ idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+ (after.tv_usec - before.tv_usec);
+
+ dev->last_residency = idle_time;
+ return index;
+}
+
static int exynos4_enter_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv,
- int index)
+ int index)
{
struct timeval before, after;
int idle_time;
@@ -60,6 +181,22 @@
return index;
}
+static int exynos4_enter_lowpower(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ int new_index = index;
+
+ /* This mode only can be entered when other core's are offline */
+ if (num_online_cpus() > 1)
+ new_index = drv->safe_state_index;
+
+ if (new_index == 0)
+ return exynos4_enter_idle(dev, drv, new_index);
+ else
+ return exynos4_enter_core0_aftr(dev, drv, new_index);
+}
+
static int __init exynos4_init_cpuidle(void)
{
int i, max_cpuidle_state, cpu_id;
@@ -74,19 +211,25 @@
memcpy(&drv->states[i], &exynos4_cpuidle_set[i],
sizeof(struct cpuidle_state));
}
+ drv->safe_state_index = 0;
cpuidle_register_driver(&exynos4_idle_driver);
for_each_cpu(cpu_id, cpu_online_mask) {
device = &per_cpu(exynos4_cpuidle_device, cpu_id);
device->cpu = cpu_id;
- device->state_count = drv->state_count;
+ if (cpu_id == 0)
+ device->state_count = (sizeof(exynos4_cpuidle_set) /
+ sizeof(struct cpuidle_state));
+ else
+ device->state_count = 1; /* Support IDLE only */
if (cpuidle_register_device(device)) {
printk(KERN_ERR "CPUidle register device failed\n,");
return -EIO;
}
}
+
return 0;
}
device_initcall(exynos4_init_cpuidle);
diff --git a/arch/arm/mach-exynos/dev-ahci.c b/arch/arm/mach-exynos/dev-ahci.c
index f57a3de..50ce5b0 100644
--- a/arch/arm/mach-exynos/dev-ahci.c
+++ b/arch/arm/mach-exynos/dev-ahci.c
@@ -242,8 +242,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_SATA,
- .end = IRQ_SATA,
+ .start = EXYNOS4_IRQ_SATA,
+ .end = EXYNOS4_IRQ_SATA,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c
index 5a9f9c2e..7199e1a 100644
--- a/arch/arm/mach-exynos/dev-audio.c
+++ b/arch/arm/mach-exynos/dev-audio.c
@@ -304,8 +304,8 @@
.flags = IORESOURCE_DMA,
},
[4] = {
- .start = IRQ_AC97,
- .end = IRQ_AC97,
+ .start = EXYNOS4_IRQ_AC97,
+ .end = EXYNOS4_IRQ_AC97,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c
new file mode 100644
index 0000000..2e85c02
--- /dev/null
+++ b/arch/arm/mach-exynos/dev-uart.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Base EXYNOS UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+#define EXYNOS_UART_RESOURCE(_series, _nr) \
+static struct resource exynos##_series##_uart##_nr##_resource[] = { \
+ [0] = DEFINE_RES_MEM(EXYNOS##_series##_PA_UART##_nr, EXYNOS##_series##_SZ_UART), \
+ [1] = DEFINE_RES_IRQ(EXYNOS##_series##_IRQ_UART##_nr), \
+};
+
+EXYNOS_UART_RESOURCE(4, 0)
+EXYNOS_UART_RESOURCE(4, 1)
+EXYNOS_UART_RESOURCE(4, 2)
+EXYNOS_UART_RESOURCE(4, 3)
+
+struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = {
+ [0] = {
+ .resources = exynos4_uart0_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart0_resource),
+ },
+ [1] = {
+ .resources = exynos4_uart1_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart1_resource),
+ },
+ [2] = {
+ .resources = exynos4_uart2_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart2_resource),
+ },
+ [3] = {
+ .resources = exynos4_uart3_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart3_resource),
+ },
+};
+
+EXYNOS_UART_RESOURCE(5, 0)
+EXYNOS_UART_RESOURCE(5, 1)
+EXYNOS_UART_RESOURCE(5, 2)
+EXYNOS_UART_RESOURCE(5, 3)
+
+struct s3c24xx_uart_resources exynos5_uart_resources[] __initdata = {
+ [0] = {
+ .resources = exynos5_uart0_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart0_resource),
+ },
+ [1] = {
+ .resources = exynos5_uart1_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart0_resource),
+ },
+ [2] = {
+ .resources = exynos5_uart2_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart2_resource),
+ },
+ [3] = {
+ .resources = exynos5_uart3_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart3_resource),
+ },
+};
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index b10fcd2..3983abe 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -29,6 +29,7 @@
#include <asm/irq.h>
#include <plat/devs.h>
#include <plat/irqs.h>
+#include <plat/cpu.h>
#include <mach/map.h>
#include <mach/irqs.h>
@@ -36,7 +37,7 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-u8 pdma0_peri[] = {
+static u8 exynos4210_pdma0_peri[] = {
DMACH_PCM0_RX,
DMACH_PCM0_TX,
DMACH_PCM2_RX,
@@ -69,28 +70,47 @@
DMACH_AC97_PCMOUT,
};
-struct dma_pl330_platdata exynos4_pdma0_pdata = {
- .nr_valid_peri = ARRAY_SIZE(pdma0_peri),
- .peri_id = pdma0_peri,
+static u8 exynos4212_pdma0_peri[] = {
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM2_RX,
+ DMACH_PCM2_TX,
+ DMACH_MIPI_HSI0,
+ DMACH_MIPI_HSI1,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI2_RX,
+ DMACH_SPI2_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART4_RX,
+ DMACH_UART4_TX,
+ DMACH_SLIMBUS0_RX,
+ DMACH_SLIMBUS0_TX,
+ DMACH_SLIMBUS2_RX,
+ DMACH_SLIMBUS2_TX,
+ DMACH_SLIMBUS4_RX,
+ DMACH_SLIMBUS4_TX,
+ DMACH_AC97_MICIN,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_PCMOUT,
+ DMACH_MIPI_HSI4,
+ DMACH_MIPI_HSI5,
};
-struct amba_device exynos4_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &exynos4_pdma0_pdata,
- },
- .res = {
- .start = EXYNOS4_PA_PDMA0,
- .end = EXYNOS4_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+struct dma_pl330_platdata exynos4_pdma0_pdata;
-u8 pdma1_peri[] = {
+static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330,
+ EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos4_pdma0_pdata);
+
+static u8 exynos4210_pdma1_peri[] = {
DMACH_PCM0_RX,
DMACH_PCM0_TX,
DMACH_PCM1_RX,
@@ -118,39 +138,94 @@
DMACH_SLIMBUS5_TX,
};
-struct dma_pl330_platdata exynos4_pdma1_pdata = {
- .nr_valid_peri = ARRAY_SIZE(pdma1_peri),
- .peri_id = pdma1_peri,
+static u8 exynos4212_pdma1_peri[] = {
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM1_RX,
+ DMACH_PCM1_TX,
+ DMACH_MIPI_HSI2,
+ DMACH_MIPI_HSI3,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_SLIMBUS1_RX,
+ DMACH_SLIMBUS1_TX,
+ DMACH_SLIMBUS3_RX,
+ DMACH_SLIMBUS3_TX,
+ DMACH_SLIMBUS5_RX,
+ DMACH_SLIMBUS5_TX,
+ DMACH_SLIMBUS0AUX_RX,
+ DMACH_SLIMBUS0AUX_TX,
+ DMACH_SPDIF,
+ DMACH_MIPI_HSI6,
+ DMACH_MIPI_HSI7,
};
-struct amba_device exynos4_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &exynos4_pdma1_pdata,
- },
- .res = {
- .start = EXYNOS4_PA_PDMA1,
- .end = EXYNOS4_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
+static struct dma_pl330_platdata exynos4_pdma1_pdata;
+
+static AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330,
+ EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos4_pdma1_pdata);
+
+static u8 mdma_peri[] = {
+ DMACH_MTOM_0,
+ DMACH_MTOM_1,
+ DMACH_MTOM_2,
+ DMACH_MTOM_3,
+ DMACH_MTOM_4,
+ DMACH_MTOM_5,
+ DMACH_MTOM_6,
+ DMACH_MTOM_7,
};
+static struct dma_pl330_platdata exynos4_mdma1_pdata = {
+ .nr_valid_peri = ARRAY_SIZE(mdma_peri),
+ .peri_id = mdma_peri,
+};
+
+static AMBA_AHB_DEVICE(exynos4_mdma1, "dma-pl330.2", 0x00041330,
+ EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos4_mdma1_pdata);
+
static int __init exynos4_dma_init(void)
{
if (of_have_populated_dt())
return 0;
+ if (soc_is_exynos4210()) {
+ exynos4_pdma0_pdata.nr_valid_peri =
+ ARRAY_SIZE(exynos4210_pdma0_peri);
+ exynos4_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
+ exynos4_pdma1_pdata.nr_valid_peri =
+ ARRAY_SIZE(exynos4210_pdma1_peri);
+ exynos4_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
+ } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+ exynos4_pdma0_pdata.nr_valid_peri =
+ ARRAY_SIZE(exynos4212_pdma0_peri);
+ exynos4_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
+ exynos4_pdma1_pdata.nr_valid_peri =
+ ARRAY_SIZE(exynos4212_pdma1_peri);
+ exynos4_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
+ }
+
dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
- amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+ amba_device_register(&exynos4_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
- amba_device_register(&exynos4_device_pdma1, &iomem_resource);
+ amba_device_register(&exynos4_pdma1_device, &iomem_resource);
+
+ dma_cap_set(DMA_MEMCPY, exynos4_mdma1_pdata.cap_mask);
+ amba_device_register(&exynos4_mdma1_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S
index 6cacf16..6c857ff 100644
--- a/arch/arm/mach-exynos/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
@@ -21,8 +21,13 @@
*/
.macro addruart, rp, rv, tmp
- ldr \rp, = S3C_PA_UART
- ldr \rv, = S3C_VA_UART
+ mov \rp, #0x10000000
+ ldr \rp, [\rp, #0x0]
+ and \rp, \rp, #0xf00000
+ teq \rp, #0x500000 @@ EXYNOS5
+ ldreq \rp, =EXYNOS5_PA_UART
+ movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4
+ ldr \rv, =S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S
deleted file mode 100644
index 3ba4f54..0000000
--- a/arch/arm/mach-exynos/include/mach/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/* arch/arm/mach-exynos4/include/mach/entry-macro.S
- *
- * Cloned from arch/arm/mach-realview/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for EXYNOS4 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-exynos/include/mach/exynos4-clock.h b/arch/arm/mach-exynos/include/mach/exynos4-clock.h
deleted file mode 100644
index a07fcbf..0000000
--- a/arch/arm/mach-exynos/include/mach/exynos4-clock.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Header file for exynos4 clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
-
-#include <linux/clk.h>
-
-extern struct clk clk_sclk_hdmi27m;
-extern struct clk clk_sclk_usbphy0;
-extern struct clk clk_sclk_usbphy1;
-extern struct clk clk_sclk_hdmiphy;
-
-extern struct clksrc_clk clk_sclk_apll;
-extern struct clksrc_clk clk_mout_mpll;
-extern struct clksrc_clk clk_aclk_133;
-extern struct clksrc_clk clk_mout_epll;
-extern struct clksrc_clk clk_sclk_vpll;
-
-extern struct clk *clkset_corebus_list[];
-extern struct clksrc_sources clkset_mout_corebus;
-
-extern struct clk *clkset_aclk_top_list[];
-extern struct clksrc_sources clkset_aclk;
-
-extern struct clk *clkset_group_list[];
-extern struct clksrc_sources clkset_group;
-
-extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
-extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
-
-#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index f77bce0..9bee853 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -1,9 +1,8 @@
-/* linux/arch/arm/mach-exynos4/include/mach/irqs.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * EXYNOS4 - IRQ definitions
+ * EXYNOS - IRQ definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -17,158 +16,450 @@
/* PPI: Private Peripheral Interrupt */
-#define IRQ_PPI(x) (x+16)
-
-#define IRQ_MCT_LOCALTIMER IRQ_PPI(12)
+#define IRQ_PPI(x) (x + 16)
/* SPI: Shared Peripheral Interrupt */
-#define IRQ_SPI(x) (x+32)
+#define IRQ_SPI(x) (x + 32)
-#define IRQ_EINT0 IRQ_SPI(16)
-#define IRQ_EINT1 IRQ_SPI(17)
-#define IRQ_EINT2 IRQ_SPI(18)
-#define IRQ_EINT3 IRQ_SPI(19)
-#define IRQ_EINT4 IRQ_SPI(20)
-#define IRQ_EINT5 IRQ_SPI(21)
-#define IRQ_EINT6 IRQ_SPI(22)
-#define IRQ_EINT7 IRQ_SPI(23)
-#define IRQ_EINT8 IRQ_SPI(24)
-#define IRQ_EINT9 IRQ_SPI(25)
-#define IRQ_EINT10 IRQ_SPI(26)
-#define IRQ_EINT11 IRQ_SPI(27)
-#define IRQ_EINT12 IRQ_SPI(28)
-#define IRQ_EINT13 IRQ_SPI(29)
-#define IRQ_EINT14 IRQ_SPI(30)
-#define IRQ_EINT15 IRQ_SPI(31)
-#define IRQ_EINT16_31 IRQ_SPI(32)
+/* COMBINER */
-#define IRQ_PDMA0 IRQ_SPI(35)
-#define IRQ_PDMA1 IRQ_SPI(36)
-#define IRQ_TIMER0_VIC IRQ_SPI(37)
-#define IRQ_TIMER1_VIC IRQ_SPI(38)
-#define IRQ_TIMER2_VIC IRQ_SPI(39)
-#define IRQ_TIMER3_VIC IRQ_SPI(40)
-#define IRQ_TIMER4_VIC IRQ_SPI(41)
-#define IRQ_MCT_L0 IRQ_SPI(42)
-#define IRQ_WDT IRQ_SPI(43)
-#define IRQ_RTC_ALARM IRQ_SPI(44)
-#define IRQ_RTC_TIC IRQ_SPI(45)
-#define IRQ_GPIO_XB IRQ_SPI(46)
-#define IRQ_GPIO_XA IRQ_SPI(47)
-#define IRQ_MCT_L1 IRQ_SPI(48)
+#define MAX_IRQ_IN_COMBINER 8
+#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128))
+#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y)
-#define IRQ_UART0 IRQ_SPI(52)
-#define IRQ_UART1 IRQ_SPI(53)
-#define IRQ_UART2 IRQ_SPI(54)
-#define IRQ_UART3 IRQ_SPI(55)
-#define IRQ_UART4 IRQ_SPI(56)
-#define IRQ_MCT_G0 IRQ_SPI(57)
-#define IRQ_IIC IRQ_SPI(58)
-#define IRQ_IIC1 IRQ_SPI(59)
-#define IRQ_IIC2 IRQ_SPI(60)
-#define IRQ_IIC3 IRQ_SPI(61)
-#define IRQ_IIC4 IRQ_SPI(62)
-#define IRQ_IIC5 IRQ_SPI(63)
-#define IRQ_IIC6 IRQ_SPI(64)
-#define IRQ_IIC7 IRQ_SPI(65)
-#define IRQ_SPI0 IRQ_SPI(66)
-#define IRQ_SPI1 IRQ_SPI(67)
-#define IRQ_SPI2 IRQ_SPI(68)
+/* For EXYNOS4 and EXYNOS5 */
-#define IRQ_USB_HOST IRQ_SPI(70)
-#define IRQ_USB_HSOTG IRQ_SPI(71)
-#define IRQ_MODEM_IF IRQ_SPI(72)
-#define IRQ_HSMMC0 IRQ_SPI(73)
-#define IRQ_HSMMC1 IRQ_SPI(74)
-#define IRQ_HSMMC2 IRQ_SPI(75)
-#define IRQ_HSMMC3 IRQ_SPI(76)
-#define IRQ_DWMCI IRQ_SPI(77)
+#define EXYNOS_IRQ_MCT_LOCALTIMER IRQ_PPI(12)
-#define IRQ_MIPI_CSIS0 IRQ_SPI(78)
-#define IRQ_MIPI_CSIS1 IRQ_SPI(80)
+#define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32)
-#define IRQ_ONENAND_AUDI IRQ_SPI(82)
-#define IRQ_ROTATOR IRQ_SPI(83)
-#define IRQ_FIMC0 IRQ_SPI(84)
-#define IRQ_FIMC1 IRQ_SPI(85)
-#define IRQ_FIMC2 IRQ_SPI(86)
-#define IRQ_FIMC3 IRQ_SPI(87)
-#define IRQ_JPEG IRQ_SPI(88)
-#define IRQ_2D IRQ_SPI(89)
-#define IRQ_PCIE IRQ_SPI(90)
+/* For EXYNOS4 SoCs */
-#define IRQ_MIXER IRQ_SPI(91)
-#define IRQ_HDMI IRQ_SPI(92)
-#define IRQ_IIC_HDMIPHY IRQ_SPI(93)
-#define IRQ_MFC IRQ_SPI(94)
-#define IRQ_SDO IRQ_SPI(95)
+#define EXYNOS4_IRQ_EINT0 IRQ_SPI(16)
+#define EXYNOS4_IRQ_EINT1 IRQ_SPI(17)
+#define EXYNOS4_IRQ_EINT2 IRQ_SPI(18)
+#define EXYNOS4_IRQ_EINT3 IRQ_SPI(19)
+#define EXYNOS4_IRQ_EINT4 IRQ_SPI(20)
+#define EXYNOS4_IRQ_EINT5 IRQ_SPI(21)
+#define EXYNOS4_IRQ_EINT6 IRQ_SPI(22)
+#define EXYNOS4_IRQ_EINT7 IRQ_SPI(23)
+#define EXYNOS4_IRQ_EINT8 IRQ_SPI(24)
+#define EXYNOS4_IRQ_EINT9 IRQ_SPI(25)
+#define EXYNOS4_IRQ_EINT10 IRQ_SPI(26)
+#define EXYNOS4_IRQ_EINT11 IRQ_SPI(27)
+#define EXYNOS4_IRQ_EINT12 IRQ_SPI(28)
+#define EXYNOS4_IRQ_EINT13 IRQ_SPI(29)
+#define EXYNOS4_IRQ_EINT14 IRQ_SPI(30)
+#define EXYNOS4_IRQ_EINT15 IRQ_SPI(31)
-#define IRQ_AUDIO_SS IRQ_SPI(96)
-#define IRQ_I2S0 IRQ_SPI(97)
-#define IRQ_I2S1 IRQ_SPI(98)
-#define IRQ_I2S2 IRQ_SPI(99)
-#define IRQ_AC97 IRQ_SPI(100)
+#define EXYNOS4_IRQ_MDMA0 IRQ_SPI(33)
+#define EXYNOS4_IRQ_MDMA1 IRQ_SPI(34)
+#define EXYNOS4_IRQ_PDMA0 IRQ_SPI(35)
+#define EXYNOS4_IRQ_PDMA1 IRQ_SPI(36)
+#define EXYNOS4_IRQ_TIMER0_VIC IRQ_SPI(37)
+#define EXYNOS4_IRQ_TIMER1_VIC IRQ_SPI(38)
+#define EXYNOS4_IRQ_TIMER2_VIC IRQ_SPI(39)
+#define EXYNOS4_IRQ_TIMER3_VIC IRQ_SPI(40)
+#define EXYNOS4_IRQ_TIMER4_VIC IRQ_SPI(41)
+#define EXYNOS4_IRQ_MCT_L0 IRQ_SPI(42)
+#define EXYNOS4_IRQ_WDT IRQ_SPI(43)
+#define EXYNOS4_IRQ_RTC_ALARM IRQ_SPI(44)
+#define EXYNOS4_IRQ_RTC_TIC IRQ_SPI(45)
+#define EXYNOS4_IRQ_GPIO_XB IRQ_SPI(46)
+#define EXYNOS4_IRQ_GPIO_XA IRQ_SPI(47)
+#define EXYNOS4_IRQ_MCT_L1 IRQ_SPI(48)
-#define IRQ_SPDIF IRQ_SPI(104)
-#define IRQ_ADC0 IRQ_SPI(105)
-#define IRQ_PEN0 IRQ_SPI(106)
-#define IRQ_ADC1 IRQ_SPI(107)
-#define IRQ_PEN1 IRQ_SPI(108)
-#define IRQ_KEYPAD IRQ_SPI(109)
-#define IRQ_PMU IRQ_SPI(110)
-#define IRQ_GPS IRQ_SPI(111)
-#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
-#define IRQ_SLIMBUS IRQ_SPI(113)
+#define EXYNOS4_IRQ_UART0 IRQ_SPI(52)
+#define EXYNOS4_IRQ_UART1 IRQ_SPI(53)
+#define EXYNOS4_IRQ_UART2 IRQ_SPI(54)
+#define EXYNOS4_IRQ_UART3 IRQ_SPI(55)
+#define EXYNOS4_IRQ_UART4 IRQ_SPI(56)
+#define EXYNOS4_IRQ_MCT_G0 IRQ_SPI(57)
+#define EXYNOS4_IRQ_IIC IRQ_SPI(58)
+#define EXYNOS4_IRQ_IIC1 IRQ_SPI(59)
+#define EXYNOS4_IRQ_IIC2 IRQ_SPI(60)
+#define EXYNOS4_IRQ_IIC3 IRQ_SPI(61)
+#define EXYNOS4_IRQ_IIC4 IRQ_SPI(62)
+#define EXYNOS4_IRQ_IIC5 IRQ_SPI(63)
+#define EXYNOS4_IRQ_IIC6 IRQ_SPI(64)
+#define EXYNOS4_IRQ_IIC7 IRQ_SPI(65)
+#define EXYNOS4_IRQ_SPI0 IRQ_SPI(66)
+#define EXYNOS4_IRQ_SPI1 IRQ_SPI(67)
+#define EXYNOS4_IRQ_SPI2 IRQ_SPI(68)
-#define IRQ_TSI IRQ_SPI(115)
-#define IRQ_SATA IRQ_SPI(116)
+#define EXYNOS4_IRQ_USB_HOST IRQ_SPI(70)
+#define EXYNOS4_IRQ_USB_HSOTG IRQ_SPI(71)
+#define EXYNOS4_IRQ_MODEM_IF IRQ_SPI(72)
+#define EXYNOS4_IRQ_HSMMC0 IRQ_SPI(73)
+#define EXYNOS4_IRQ_HSMMC1 IRQ_SPI(74)
+#define EXYNOS4_IRQ_HSMMC2 IRQ_SPI(75)
+#define EXYNOS4_IRQ_HSMMC3 IRQ_SPI(76)
+#define EXYNOS4_IRQ_DWMCI IRQ_SPI(77)
-#define MAX_IRQ_IN_COMBINER 8
-#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128))
-#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y)
+#define EXYNOS4_IRQ_MIPI_CSIS0 IRQ_SPI(78)
+#define EXYNOS4_IRQ_MIPI_CSIS1 IRQ_SPI(80)
-#define IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0)
-#define IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1)
-#define IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2)
-#define IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3)
-#define IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4)
-#define IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5)
-#define IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6)
-#define IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7)
+#define EXYNOS4_IRQ_ONENAND_AUDI IRQ_SPI(82)
+#define EXYNOS4_IRQ_ROTATOR IRQ_SPI(83)
+#define EXYNOS4_IRQ_FIMC0 IRQ_SPI(84)
+#define EXYNOS4_IRQ_FIMC1 IRQ_SPI(85)
+#define EXYNOS4_IRQ_FIMC2 IRQ_SPI(86)
+#define EXYNOS4_IRQ_FIMC3 IRQ_SPI(87)
+#define EXYNOS4_IRQ_JPEG IRQ_SPI(88)
+#define EXYNOS4_IRQ_2D IRQ_SPI(89)
+#define EXYNOS4_IRQ_PCIE IRQ_SPI(90)
-#define IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0)
-#define IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1)
-#define IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2)
-#define IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3)
-#define IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4)
-#define IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5)
-#define IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6)
-#define IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7)
+#define EXYNOS4_IRQ_MIXER IRQ_SPI(91)
+#define EXYNOS4_IRQ_HDMI IRQ_SPI(92)
+#define EXYNOS4_IRQ_IIC_HDMIPHY IRQ_SPI(93)
+#define EXYNOS4_IRQ_MFC IRQ_SPI(94)
+#define EXYNOS4_IRQ_SDO IRQ_SPI(95)
-#define IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0)
-#define IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1)
-#define IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2)
+#define EXYNOS4_IRQ_AUDIO_SS IRQ_SPI(96)
+#define EXYNOS4_IRQ_I2S0 IRQ_SPI(97)
+#define EXYNOS4_IRQ_I2S1 IRQ_SPI(98)
+#define EXYNOS4_IRQ_I2S2 IRQ_SPI(99)
+#define EXYNOS4_IRQ_AC97 IRQ_SPI(100)
-#define MAX_COMBINER_NR 16
+#define EXYNOS4_IRQ_SPDIF IRQ_SPI(104)
+#define EXYNOS4_IRQ_ADC0 IRQ_SPI(105)
+#define EXYNOS4_IRQ_PEN0 IRQ_SPI(106)
+#define EXYNOS4_IRQ_ADC1 IRQ_SPI(107)
+#define EXYNOS4_IRQ_PEN1 IRQ_SPI(108)
+#define EXYNOS4_IRQ_KEYPAD IRQ_SPI(109)
+#define EXYNOS4_IRQ_PMU IRQ_SPI(110)
+#define EXYNOS4_IRQ_GPS IRQ_SPI(111)
+#define EXYNOS4_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
+#define EXYNOS4_IRQ_SLIMBUS IRQ_SPI(113)
-#define IRQ_ADC IRQ_ADC0
-#define IRQ_TC IRQ_PEN0
+#define EXYNOS4_IRQ_TSI IRQ_SPI(115)
+#define EXYNOS4_IRQ_SATA IRQ_SPI(116)
-#define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0)
+#define EXYNOS4_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0)
+#define EXYNOS4_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1)
+#define EXYNOS4_IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2)
+#define EXYNOS4_IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3)
+#define EXYNOS4_IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4)
+#define EXYNOS4_IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5)
+#define EXYNOS4_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6)
+#define EXYNOS4_IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7)
-#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0)
-#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16)
+#define EXYNOS4_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0)
+#define EXYNOS4_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1)
+#define EXYNOS4_IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2)
+#define EXYNOS4_IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3)
+#define EXYNOS4_IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4)
+#define EXYNOS4_IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5)
+#define EXYNOS4_IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6)
+#define EXYNOS4_IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7)
-/* optional GPIO interrupts */
-#define S5P_GPIOINT_BASE (S5P_IRQ_EINT_BASE + 32)
-#define IRQ_GPIO1_NR_GROUPS 16
-#define IRQ_GPIO2_NR_GROUPS 9
-#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
+#define EXYNOS4_IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0)
+#define EXYNOS4_IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1)
+#define EXYNOS4_IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2)
-#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64)
+#define EXYNOS4_MAX_COMBINER_NR 16
+
+#define EXYNOS4_IRQ_GPIO1_NR_GROUPS 16
+#define EXYNOS4_IRQ_GPIO2_NR_GROUPS 9
+
+/*
+ * For Compatibility:
+ * the default is for EXYNOS4, and
+ * for exynos5, should be re-mapped at function
+ */
+
+#define IRQ_TIMER0_VIC EXYNOS4_IRQ_TIMER0_VIC
+#define IRQ_TIMER1_VIC EXYNOS4_IRQ_TIMER1_VIC
+#define IRQ_TIMER2_VIC EXYNOS4_IRQ_TIMER2_VIC
+#define IRQ_TIMER3_VIC EXYNOS4_IRQ_TIMER3_VIC
+#define IRQ_TIMER4_VIC EXYNOS4_IRQ_TIMER4_VIC
+
+#define IRQ_WDT EXYNOS4_IRQ_WDT
+#define IRQ_RTC_ALARM EXYNOS4_IRQ_RTC_ALARM
+#define IRQ_RTC_TIC EXYNOS4_IRQ_RTC_TIC
+#define IRQ_GPIO_XB EXYNOS4_IRQ_GPIO_XB
+#define IRQ_GPIO_XA EXYNOS4_IRQ_GPIO_XA
+
+#define IRQ_IIC EXYNOS4_IRQ_IIC
+#define IRQ_IIC1 EXYNOS4_IRQ_IIC1
+#define IRQ_IIC3 EXYNOS4_IRQ_IIC3
+#define IRQ_IIC5 EXYNOS4_IRQ_IIC5
+#define IRQ_IIC6 EXYNOS4_IRQ_IIC6
+#define IRQ_IIC7 EXYNOS4_IRQ_IIC7
+
+#define IRQ_USB_HOST EXYNOS4_IRQ_USB_HOST
+
+#define IRQ_HSMMC0 EXYNOS4_IRQ_HSMMC0
+#define IRQ_HSMMC1 EXYNOS4_IRQ_HSMMC1
+#define IRQ_HSMMC2 EXYNOS4_IRQ_HSMMC2
+#define IRQ_HSMMC3 EXYNOS4_IRQ_HSMMC3
+
+#define IRQ_MIPI_CSIS0 EXYNOS4_IRQ_MIPI_CSIS0
+
+#define IRQ_ONENAND_AUDI EXYNOS4_IRQ_ONENAND_AUDI
+
+#define IRQ_FIMC0 EXYNOS4_IRQ_FIMC0
+#define IRQ_FIMC1 EXYNOS4_IRQ_FIMC1
+#define IRQ_FIMC2 EXYNOS4_IRQ_FIMC2
+#define IRQ_FIMC3 EXYNOS4_IRQ_FIMC3
+#define IRQ_JPEG EXYNOS4_IRQ_JPEG
+#define IRQ_2D EXYNOS4_IRQ_2D
+
+#define IRQ_MIXER EXYNOS4_IRQ_MIXER
+#define IRQ_HDMI EXYNOS4_IRQ_HDMI
+#define IRQ_IIC_HDMIPHY EXYNOS4_IRQ_IIC_HDMIPHY
+#define IRQ_MFC EXYNOS4_IRQ_MFC
+#define IRQ_SDO EXYNOS4_IRQ_SDO
+
+#define IRQ_ADC EXYNOS4_IRQ_ADC0
+#define IRQ_TC EXYNOS4_IRQ_PEN0
+
+#define IRQ_KEYPAD EXYNOS4_IRQ_KEYPAD
+#define IRQ_PMU EXYNOS4_IRQ_PMU
+
+#define IRQ_SYSMMU_MDMA0_0 EXYNOS4_IRQ_SYSMMU_MDMA0_0
+#define IRQ_SYSMMU_SSS_0 EXYNOS4_IRQ_SYSMMU_SSS_0
+#define IRQ_SYSMMU_FIMC0_0 EXYNOS4_IRQ_SYSMMU_FIMC0_0
+#define IRQ_SYSMMU_FIMC1_0 EXYNOS4_IRQ_SYSMMU_FIMC1_0
+#define IRQ_SYSMMU_FIMC2_0 EXYNOS4_IRQ_SYSMMU_FIMC2_0
+#define IRQ_SYSMMU_FIMC3_0 EXYNOS4_IRQ_SYSMMU_FIMC3_0
+#define IRQ_SYSMMU_JPEG_0 EXYNOS4_IRQ_SYSMMU_JPEG_0
+#define IRQ_SYSMMU_2D_0 EXYNOS4_IRQ_SYSMMU_2D_0
+
+#define IRQ_SYSMMU_ROTATOR_0 EXYNOS4_IRQ_SYSMMU_ROTATOR_0
+#define IRQ_SYSMMU_MDMA1_0 EXYNOS4_IRQ_SYSMMU_MDMA1_0
+#define IRQ_SYSMMU_LCD0_M0_0 EXYNOS4_IRQ_SYSMMU_LCD0_M0_0
+#define IRQ_SYSMMU_LCD1_M1_0 EXYNOS4_IRQ_SYSMMU_LCD1_M1_0
+#define IRQ_SYSMMU_TV_M0_0 EXYNOS4_IRQ_SYSMMU_TV_M0_0
+#define IRQ_SYSMMU_MFC_M0_0 EXYNOS4_IRQ_SYSMMU_MFC_M0_0
+#define IRQ_SYSMMU_MFC_M1_0 EXYNOS4_IRQ_SYSMMU_MFC_M1_0
+#define IRQ_SYSMMU_PCIE_0 EXYNOS4_IRQ_SYSMMU_PCIE_0
+
+#define IRQ_FIMD0_FIFO EXYNOS4_IRQ_FIMD0_FIFO
+#define IRQ_FIMD0_VSYNC EXYNOS4_IRQ_FIMD0_VSYNC
+#define IRQ_FIMD0_SYSTEM EXYNOS4_IRQ_FIMD0_SYSTEM
+
+#define IRQ_GPIO1_NR_GROUPS EXYNOS4_IRQ_GPIO1_NR_GROUPS
+#define IRQ_GPIO2_NR_GROUPS EXYNOS4_IRQ_GPIO2_NR_GROUPS
+
+/* For EXYNOS5 SoCs */
+
+#define EXYNOS5_IRQ_MDMA0 IRQ_SPI(33)
+#define EXYNOS5_IRQ_PDMA0 IRQ_SPI(34)
+#define EXYNOS5_IRQ_PDMA1 IRQ_SPI(35)
+#define EXYNOS5_IRQ_TIMER0_VIC IRQ_SPI(36)
+#define EXYNOS5_IRQ_TIMER1_VIC IRQ_SPI(37)
+#define EXYNOS5_IRQ_TIMER2_VIC IRQ_SPI(38)
+#define EXYNOS5_IRQ_TIMER3_VIC IRQ_SPI(39)
+#define EXYNOS5_IRQ_TIMER4_VIC IRQ_SPI(40)
+#define EXYNOS5_IRQ_RTIC IRQ_SPI(41)
+#define EXYNOS5_IRQ_WDT IRQ_SPI(42)
+#define EXYNOS5_IRQ_RTC_ALARM IRQ_SPI(43)
+#define EXYNOS5_IRQ_RTC_TIC IRQ_SPI(44)
+#define EXYNOS5_IRQ_GPIO_XB IRQ_SPI(45)
+#define EXYNOS5_IRQ_GPIO_XA IRQ_SPI(46)
+#define EXYNOS5_IRQ_GPIO IRQ_SPI(47)
+#define EXYNOS5_IRQ_IEM_IEC IRQ_SPI(48)
+#define EXYNOS5_IRQ_IEM_APC IRQ_SPI(49)
+#define EXYNOS5_IRQ_GPIO_C2C IRQ_SPI(50)
+#define EXYNOS5_IRQ_UART0 IRQ_SPI(51)
+#define EXYNOS5_IRQ_UART1 IRQ_SPI(52)
+#define EXYNOS5_IRQ_UART2 IRQ_SPI(53)
+#define EXYNOS5_IRQ_UART3 IRQ_SPI(54)
+#define EXYNOS5_IRQ_UART4 IRQ_SPI(55)
+#define EXYNOS5_IRQ_IIC IRQ_SPI(56)
+#define EXYNOS5_IRQ_IIC1 IRQ_SPI(57)
+#define EXYNOS5_IRQ_IIC2 IRQ_SPI(58)
+#define EXYNOS5_IRQ_IIC3 IRQ_SPI(59)
+#define EXYNOS5_IRQ_IIC4 IRQ_SPI(60)
+#define EXYNOS5_IRQ_IIC5 IRQ_SPI(61)
+#define EXYNOS5_IRQ_IIC6 IRQ_SPI(62)
+#define EXYNOS5_IRQ_IIC7 IRQ_SPI(63)
+#define EXYNOS5_IRQ_IIC_HDMIPHY IRQ_SPI(64)
+#define EXYNOS5_IRQ_TMU IRQ_SPI(65)
+#define EXYNOS5_IRQ_FIQ_0 IRQ_SPI(66)
+#define EXYNOS5_IRQ_FIQ_1 IRQ_SPI(67)
+#define EXYNOS5_IRQ_SPI0 IRQ_SPI(68)
+#define EXYNOS5_IRQ_SPI1 IRQ_SPI(69)
+#define EXYNOS5_IRQ_SPI2 IRQ_SPI(70)
+#define EXYNOS5_IRQ_USB_HOST IRQ_SPI(71)
+#define EXYNOS5_IRQ_USB3_DRD IRQ_SPI(72)
+#define EXYNOS5_IRQ_MIPI_HSI IRQ_SPI(73)
+#define EXYNOS5_IRQ_USB_HSOTG IRQ_SPI(74)
+#define EXYNOS5_IRQ_HSMMC0 IRQ_SPI(75)
+#define EXYNOS5_IRQ_HSMMC1 IRQ_SPI(76)
+#define EXYNOS5_IRQ_HSMMC2 IRQ_SPI(77)
+#define EXYNOS5_IRQ_HSMMC3 IRQ_SPI(78)
+#define EXYNOS5_IRQ_MIPICSI0 IRQ_SPI(79)
+#define EXYNOS5_IRQ_MIPICSI1 IRQ_SPI(80)
+#define EXYNOS5_IRQ_EFNFCON_DMA_ABORT IRQ_SPI(81)
+#define EXYNOS5_IRQ_MIPIDSI0 IRQ_SPI(82)
+#define EXYNOS5_IRQ_ROTATOR IRQ_SPI(84)
+#define EXYNOS5_IRQ_GSC0 IRQ_SPI(85)
+#define EXYNOS5_IRQ_GSC1 IRQ_SPI(86)
+#define EXYNOS5_IRQ_GSC2 IRQ_SPI(87)
+#define EXYNOS5_IRQ_GSC3 IRQ_SPI(88)
+#define EXYNOS5_IRQ_JPEG IRQ_SPI(89)
+#define EXYNOS5_IRQ_EFNFCON_DMA IRQ_SPI(90)
+#define EXYNOS5_IRQ_2D IRQ_SPI(91)
+#define EXYNOS5_IRQ_SFMC0 IRQ_SPI(92)
+#define EXYNOS5_IRQ_SFMC1 IRQ_SPI(93)
+#define EXYNOS5_IRQ_MIXER IRQ_SPI(94)
+#define EXYNOS5_IRQ_HDMI IRQ_SPI(95)
+#define EXYNOS5_IRQ_MFC IRQ_SPI(96)
+#define EXYNOS5_IRQ_AUDIO_SS IRQ_SPI(97)
+#define EXYNOS5_IRQ_I2S0 IRQ_SPI(98)
+#define EXYNOS5_IRQ_I2S1 IRQ_SPI(99)
+#define EXYNOS5_IRQ_I2S2 IRQ_SPI(100)
+#define EXYNOS5_IRQ_AC97 IRQ_SPI(101)
+#define EXYNOS5_IRQ_PCM0 IRQ_SPI(102)
+#define EXYNOS5_IRQ_PCM1 IRQ_SPI(103)
+#define EXYNOS5_IRQ_PCM2 IRQ_SPI(104)
+#define EXYNOS5_IRQ_SPDIF IRQ_SPI(105)
+#define EXYNOS5_IRQ_ADC0 IRQ_SPI(106)
+
+#define EXYNOS5_IRQ_SATA_PHY IRQ_SPI(108)
+#define EXYNOS5_IRQ_SATA_PMEMREQ IRQ_SPI(109)
+#define EXYNOS5_IRQ_CAM_C IRQ_SPI(110)
+#define EXYNOS5_IRQ_EAGLE_PMU IRQ_SPI(111)
+#define EXYNOS5_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
+#define EXYNOS5_IRQ_DP1_INTP1 IRQ_SPI(113)
+#define EXYNOS5_IRQ_CEC IRQ_SPI(114)
+#define EXYNOS5_IRQ_SATA IRQ_SPI(115)
+#define EXYNOS5_IRQ_NFCON IRQ_SPI(116)
+
+#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123)
+#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124)
+#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125)
+#define EXYNOS5_IRQ_FIMC_LITE1 IRQ_SPI(126)
+#define EXYNOS5_IRQ_RP_TIMER IRQ_SPI(127)
+
+#define EXYNOS5_IRQ_PMU COMBINER_IRQ(1, 2)
+#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(1, 6)
+
+#define EXYNOS5_IRQ_SYSMMU_GSC0_0 COMBINER_IRQ(2, 0)
+#define EXYNOS5_IRQ_SYSMMU_GSC0_1 COMBINER_IRQ(2, 1)
+#define EXYNOS5_IRQ_SYSMMU_GSC1_0 COMBINER_IRQ(2, 2)
+#define EXYNOS5_IRQ_SYSMMU_GSC1_1 COMBINER_IRQ(2, 3)
+#define EXYNOS5_IRQ_SYSMMU_GSC2_0 COMBINER_IRQ(2, 4)
+#define EXYNOS5_IRQ_SYSMMU_GSC2_1 COMBINER_IRQ(2, 5)
+#define EXYNOS5_IRQ_SYSMMU_GSC3_0 COMBINER_IRQ(2, 6)
+#define EXYNOS5_IRQ_SYSMMU_GSC3_1 COMBINER_IRQ(2, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_FIMD1_0 COMBINER_IRQ(3, 2)
+#define EXYNOS5_IRQ_SYSMMU_FIMD1_1 COMBINER_IRQ(3, 3)
+#define EXYNOS5_IRQ_SYSMMU_LITE0_0 COMBINER_IRQ(3, 4)
+#define EXYNOS5_IRQ_SYSMMU_LITE0_1 COMBINER_IRQ(3, 5)
+#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_0 COMBINER_IRQ(3, 6)
+#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_1 COMBINER_IRQ(3, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(4, 0)
+#define EXYNOS5_IRQ_SYSMMU_ROTATOR_1 COMBINER_IRQ(4, 1)
+#define EXYNOS5_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 2)
+#define EXYNOS5_IRQ_SYSMMU_JPEG_1 COMBINER_IRQ(4, 3)
+
+#define EXYNOS5_IRQ_SYSMMU_FD_0 COMBINER_IRQ(5, 0)
+#define EXYNOS5_IRQ_SYSMMU_FD_1 COMBINER_IRQ(5, 1)
+#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_0 COMBINER_IRQ(5, 2)
+#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_1 COMBINER_IRQ(5, 3)
+#define EXYNOS5_IRQ_SYSMMU_MCUISP_0 COMBINER_IRQ(5, 4)
+#define EXYNOS5_IRQ_SYSMMU_MCUISP_1 COMBINER_IRQ(5, 5)
+#define EXYNOS5_IRQ_SYSMMU_3DNR_0 COMBINER_IRQ(5, 6)
+#define EXYNOS5_IRQ_SYSMMU_3DNR_1 COMBINER_IRQ(5, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_ARM_0 COMBINER_IRQ(6, 0)
+#define EXYNOS5_IRQ_SYSMMU_ARM_1 COMBINER_IRQ(6, 1)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_0 COMBINER_IRQ(6, 2)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_1 COMBINER_IRQ(6, 3)
+#define EXYNOS5_IRQ_SYSMMU_RTIC_0 COMBINER_IRQ(6, 4)
+#define EXYNOS5_IRQ_SYSMMU_RTIC_1 COMBINER_IRQ(6, 5)
+#define EXYNOS5_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(6, 6)
+#define EXYNOS5_IRQ_SYSMMU_SSS_1 COMBINER_IRQ(6, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(7, 0)
+#define EXYNOS5_IRQ_SYSMMU_MDMA0_1 COMBINER_IRQ(7, 1)
+#define EXYNOS5_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(7, 2)
+#define EXYNOS5_IRQ_SYSMMU_MDMA1_1 COMBINER_IRQ(7, 3)
+#define EXYNOS5_IRQ_SYSMMU_TV_0 COMBINER_IRQ(7, 4)
+#define EXYNOS5_IRQ_SYSMMU_TV_1 COMBINER_IRQ(7, 5)
+#define EXYNOS5_IRQ_SYSMMU_GPSX_0 COMBINER_IRQ(7, 6)
+#define EXYNOS5_IRQ_SYSMMU_GPSX_1 COMBINER_IRQ(7, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_0 COMBINER_IRQ(8, 5)
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_1 COMBINER_IRQ(8, 6)
+
+#define EXYNOS5_IRQ_SYSMMU_DIS1_0 COMBINER_IRQ(9, 4)
+#define EXYNOS5_IRQ_SYSMMU_DIS1_1 COMBINER_IRQ(9, 5)
+
+#define EXYNOS5_IRQ_DP COMBINER_IRQ(10, 3)
+#define EXYNOS5_IRQ_SYSMMU_DIS0_0 COMBINER_IRQ(10, 4)
+#define EXYNOS5_IRQ_SYSMMU_DIS0_1 COMBINER_IRQ(10, 5)
+#define EXYNOS5_IRQ_SYSMMU_ISP_0 COMBINER_IRQ(10, 6)
+#define EXYNOS5_IRQ_SYSMMU_ISP_1 COMBINER_IRQ(10, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_ODC_0 COMBINER_IRQ(11, 0)
+#define EXYNOS5_IRQ_SYSMMU_ODC_1 COMBINER_IRQ(11, 1)
+#define EXYNOS5_IRQ_SYSMMU_DRC_0 COMBINER_IRQ(11, 6)
+#define EXYNOS5_IRQ_SYSMMU_DRC_1 COMBINER_IRQ(11, 7)
+
+#define EXYNOS5_IRQ_FIMD1_FIFO COMBINER_IRQ(18, 4)
+#define EXYNOS5_IRQ_FIMD1_VSYNC COMBINER_IRQ(18, 5)
+#define EXYNOS5_IRQ_FIMD1_SYSTEM COMBINER_IRQ(18, 6)
+
+#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0)
+#define EXYNOS5_IRQ_MCT_L0 COMBINER_IRQ(23, 1)
+#define EXYNOS5_IRQ_MCT_L1 COMBINER_IRQ(23, 2)
+#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3)
+#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4)
+#define EXYNOS5_IRQ_MCT_G2 COMBINER_IRQ(23, 5)
+#define EXYNOS5_IRQ_MCT_G3 COMBINER_IRQ(23, 6)
+
+#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0)
+#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1)
+#define EXYNOS5_IRQ_SYSMMU_LITE1_1 COMBINER_IRQ(24, 2)
+#define EXYNOS5_IRQ_SYSMMU_2D_0 COMBINER_IRQ(24, 5)
+#define EXYNOS5_IRQ_SYSMMU_2D_1 COMBINER_IRQ(24, 6)
+
+#define EXYNOS5_IRQ_EINT2 COMBINER_IRQ(25, 0)
+#define EXYNOS5_IRQ_EINT3 COMBINER_IRQ(25, 1)
+
+#define EXYNOS5_IRQ_EINT4 COMBINER_IRQ(26, 0)
+#define EXYNOS5_IRQ_EINT5 COMBINER_IRQ(26, 1)
+
+#define EXYNOS5_IRQ_EINT6 COMBINER_IRQ(27, 0)
+#define EXYNOS5_IRQ_EINT7 COMBINER_IRQ(27, 1)
+
+#define EXYNOS5_IRQ_EINT8 COMBINER_IRQ(28, 0)
+#define EXYNOS5_IRQ_EINT9 COMBINER_IRQ(28, 1)
+
+#define EXYNOS5_IRQ_EINT10 COMBINER_IRQ(29, 0)
+#define EXYNOS5_IRQ_EINT11 COMBINER_IRQ(29, 1)
+
+#define EXYNOS5_IRQ_EINT12 COMBINER_IRQ(30, 0)
+#define EXYNOS5_IRQ_EINT13 COMBINER_IRQ(30, 1)
+
+#define EXYNOS5_IRQ_EINT14 COMBINER_IRQ(31, 0)
+#define EXYNOS5_IRQ_EINT15 COMBINER_IRQ(31, 1)
+
+#define EXYNOS5_MAX_COMBINER_NR 32
+
+#define EXYNOS5_IRQ_GPIO1_NR_GROUPS 13
+#define EXYNOS5_IRQ_GPIO2_NR_GROUPS 9
+#define EXYNOS5_IRQ_GPIO3_NR_GROUPS 5
+#define EXYNOS5_IRQ_GPIO4_NR_GROUPS 1
+
+#define MAX_COMBINER_NR (EXYNOS4_MAX_COMBINER_NR > EXYNOS5_MAX_COMBINER_NR ? \
+ EXYNOS4_MAX_COMBINER_NR : EXYNOS5_MAX_COMBINER_NR)
+
+#define S5P_EINT_BASE1 COMBINER_IRQ(MAX_COMBINER_NR, 0)
+#define S5P_EINT_BASE2 (S5P_EINT_BASE1 + 16)
+#define S5P_GPIOINT_BASE (S5P_EINT_BASE1 + 32)
+#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
+#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64)
/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
+
+#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index c754a22..188d87d 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -25,12 +25,17 @@
#define EXYNOS4_PA_SYSRAM0 0x02025000
#define EXYNOS4_PA_SYSRAM1 0x02020000
+#define EXYNOS5_PA_SYSRAM 0x02020000
#define EXYNOS4_PA_FIMC0 0x11800000
#define EXYNOS4_PA_FIMC1 0x11810000
#define EXYNOS4_PA_FIMC2 0x11820000
#define EXYNOS4_PA_FIMC3 0x11830000
+#define EXYNOS4_PA_JPEG 0x11840000
+
+#define EXYNOS4_PA_G2D 0x12800000
+
#define EXYNOS4_PA_I2S0 0x03830000
#define EXYNOS4_PA_I2S1 0xE3100000
#define EXYNOS4_PA_I2S2 0xE2A00000
@@ -44,30 +49,44 @@
#define EXYNOS4_PA_ONENAND 0x0C000000
#define EXYNOS4_PA_ONENAND_DMA 0x0C600000
-#define EXYNOS4_PA_CHIPID 0x10000000
+#define EXYNOS_PA_CHIPID 0x10000000
#define EXYNOS4_PA_SYSCON 0x10010000
+#define EXYNOS5_PA_SYSCON 0x10050100
+
#define EXYNOS4_PA_PMU 0x10020000
+#define EXYNOS5_PA_PMU 0x10040000
+
#define EXYNOS4_PA_CMU 0x10030000
+#define EXYNOS5_PA_CMU 0x10010000
#define EXYNOS4_PA_SYSTIMER 0x10050000
+#define EXYNOS5_PA_SYSTIMER 0x101C0000
+
#define EXYNOS4_PA_WATCHDOG 0x10060000
+#define EXYNOS5_PA_WATCHDOG 0x101D0000
+
#define EXYNOS4_PA_RTC 0x10070000
#define EXYNOS4_PA_KEYPAD 0x100A0000
#define EXYNOS4_PA_DMC0 0x10400000
+#define EXYNOS4_PA_DMC1 0x10410000
#define EXYNOS4_PA_COMBINER 0x10440000
+#define EXYNOS5_PA_COMBINER 0x10440000
#define EXYNOS4_PA_GIC_CPU 0x10480000
#define EXYNOS4_PA_GIC_DIST 0x10490000
+#define EXYNOS5_PA_GIC_CPU 0x10480000
+#define EXYNOS5_PA_GIC_DIST 0x10490000
#define EXYNOS4_PA_COREPERI 0x10500000
#define EXYNOS4_PA_TWD 0x10500600
#define EXYNOS4_PA_L2CC 0x10502000
-#define EXYNOS4_PA_MDMA 0x10810000
+#define EXYNOS4_PA_MDMA0 0x10810000
+#define EXYNOS4_PA_MDMA1 0x12840000
#define EXYNOS4_PA_PDMA0 0x12680000
#define EXYNOS4_PA_PDMA1 0x12690000
@@ -91,7 +110,6 @@
#define EXYNOS4_PA_SPI1 0x13930000
#define EXYNOS4_PA_SPI2 0x13940000
-
#define EXYNOS4_PA_GPIO1 0x11400000
#define EXYNOS4_PA_GPIO2 0x11000000
#define EXYNOS4_PA_GPIO3 0x03860000
@@ -109,6 +127,7 @@
#define EXYNOS4_PA_SATAPHY_CTRL 0x126B0000
#define EXYNOS4_PA_SROMC 0x12570000
+#define EXYNOS5_PA_SROMC 0x12250000
#define EXYNOS4_PA_EHCI 0x12580000
#define EXYNOS4_PA_OHCI 0x12590000
@@ -116,6 +135,7 @@
#define EXYNOS4_PA_MFC 0x13400000
#define EXYNOS4_PA_UART 0x13800000
+#define EXYNOS5_PA_UART 0x12C00000
#define EXYNOS4_PA_VP 0x12C00000
#define EXYNOS4_PA_MIXER 0x12C10000
@@ -124,6 +144,7 @@
#define EXYNOS4_PA_IIC_HDMIPHY 0x138E0000
#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
+#define EXYNOS5_PA_IIC(x) (0x12C60000 + ((x) * 0x10000))
#define EXYNOS4_PA_ADC 0x13910000
#define EXYNOS4_PA_ADC1 0x13911000
@@ -133,8 +154,10 @@
#define EXYNOS4_PA_SPDIF 0x139B0000
#define EXYNOS4_PA_TIMER 0x139D0000
+#define EXYNOS5_PA_TIMER 0x12DD0000
#define EXYNOS4_PA_SDRAM 0x40000000
+#define EXYNOS5_PA_SDRAM 0x40000000
/* Compatibiltiy Defines */
@@ -152,7 +175,6 @@
#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7)
#define S3C_PA_RTC EXYNOS4_PA_RTC
#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG
-#define S3C_PA_UART EXYNOS4_PA_UART
#define S3C_PA_SPI0 EXYNOS4_PA_SPI0
#define S3C_PA_SPI1 EXYNOS4_PA_SPI1
#define S3C_PA_SPI2 EXYNOS4_PA_SPI2
@@ -162,6 +184,8 @@
#define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1
#define S5P_PA_FIMC2 EXYNOS4_PA_FIMC2
#define S5P_PA_FIMC3 EXYNOS4_PA_FIMC3
+#define S5P_PA_JPEG EXYNOS4_PA_JPEG
+#define S5P_PA_G2D EXYNOS4_PA_G2D
#define S5P_PA_FIMD0 EXYNOS4_PA_FIMD0
#define S5P_PA_HDMI EXYNOS4_PA_HDMI
#define S5P_PA_IIC_HDMIPHY EXYNOS4_PA_IIC_HDMIPHY
@@ -181,15 +205,18 @@
/* Compatibility UART */
+#define EXYNOS4_PA_UART0 0x13800000
+#define EXYNOS4_PA_UART1 0x13810000
+#define EXYNOS4_PA_UART2 0x13820000
+#define EXYNOS4_PA_UART3 0x13830000
+#define EXYNOS4_SZ_UART SZ_256
+
+#define EXYNOS5_PA_UART0 0x12C00000
+#define EXYNOS5_PA_UART1 0x12C10000
+#define EXYNOS5_PA_UART2 0x12C20000
+#define EXYNOS5_PA_UART3 0x12C30000
+#define EXYNOS5_SZ_UART SZ_256
+
#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART(x) (EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0 S5P_PA_UART(0)
-#define S5P_PA_UART1 S5P_PA_UART(1)
-#define S5P_PA_UART2 S5P_PA_UART(2)
-#define S5P_PA_UART3 S5P_PA_UART(3)
-#define S5P_PA_UART4 S5P_PA_UART(4)
-
-#define S5P_SZ_UART SZ_256
-
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-exynos/include/mach/pmu.h b/arch/arm/mach-exynos/include/mach/pmu.h
index 632dd56..e76b7fa 100644
--- a/arch/arm/mach-exynos/include/mach/pmu.h
+++ b/arch/arm/mach-exynos/include/mach/pmu.h
@@ -22,11 +22,13 @@
NUM_SYS_POWERDOWN,
};
+extern unsigned long l2x0_regs_phys;
struct exynos4_pmu_conf {
void __iomem *reg;
unsigned int val[NUM_SYS_POWERDOWN];
};
extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode);
+extern void s3c_cpu_resume(void);
#endif /* __ASM_ARCH_PMU_H */
diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h
index 6c37ebe..e141c1f 100644
--- a/arch/arm/mach-exynos/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos/include/mach/regs-clock.h
@@ -16,195 +16,309 @@
#include <plat/cpu.h>
#include <mach/map.h>
-#define S5P_CLKREG(x) (S5P_VA_CMU + (x))
+#define EXYNOS_CLKREG(x) (S5P_VA_CMU + (x))
-#define S5P_CLKDIV_LEFTBUS S5P_CLKREG(0x04500)
-#define S5P_CLKDIV_STAT_LEFTBUS S5P_CLKREG(0x04600)
-#define S5P_CLKGATE_IP_LEFTBUS S5P_CLKREG(0x04800)
+#define EXYNOS4_CLKDIV_LEFTBUS EXYNOS_CLKREG(0x04500)
+#define EXYNOS4_CLKDIV_STAT_LEFTBUS EXYNOS_CLKREG(0x04600)
+#define EXYNOS4_CLKGATE_IP_LEFTBUS EXYNOS_CLKREG(0x04800)
-#define S5P_CLKDIV_RIGHTBUS S5P_CLKREG(0x08500)
-#define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600)
-#define S5P_CLKGATE_IP_RIGHTBUS S5P_CLKREG(0x08800)
+#define EXYNOS4_CLKDIV_RIGHTBUS EXYNOS_CLKREG(0x08500)
+#define EXYNOS4_CLKDIV_STAT_RIGHTBUS EXYNOS_CLKREG(0x08600)
+#define EXYNOS4_CLKGATE_IP_RIGHTBUS EXYNOS_CLKREG(0x08800)
-#define S5P_EPLL_LOCK S5P_CLKREG(0x0C010)
-#define S5P_VPLL_LOCK S5P_CLKREG(0x0C020)
+#define EXYNOS4_EPLL_LOCK EXYNOS_CLKREG(0x0C010)
+#define EXYNOS4_VPLL_LOCK EXYNOS_CLKREG(0x0C020)
-#define S5P_EPLL_CON0 S5P_CLKREG(0x0C110)
-#define S5P_EPLL_CON1 S5P_CLKREG(0x0C114)
-#define S5P_VPLL_CON0 S5P_CLKREG(0x0C120)
-#define S5P_VPLL_CON1 S5P_CLKREG(0x0C124)
+#define EXYNOS4_EPLL_CON0 EXYNOS_CLKREG(0x0C110)
+#define EXYNOS4_EPLL_CON1 EXYNOS_CLKREG(0x0C114)
+#define EXYNOS4_VPLL_CON0 EXYNOS_CLKREG(0x0C120)
+#define EXYNOS4_VPLL_CON1 EXYNOS_CLKREG(0x0C124)
-#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210)
-#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214)
-#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220)
-#define S5P_CLKSRC_TV S5P_CLKREG(0x0C224)
-#define S5P_CLKSRC_MFC S5P_CLKREG(0x0C228)
-#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C)
-#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230)
-#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234)
-#define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C)
-#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240)
-#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250)
-#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254)
+#define EXYNOS4_CLKSRC_TOP0 EXYNOS_CLKREG(0x0C210)
+#define EXYNOS4_CLKSRC_TOP1 EXYNOS_CLKREG(0x0C214)
+#define EXYNOS4_CLKSRC_CAM EXYNOS_CLKREG(0x0C220)
+#define EXYNOS4_CLKSRC_TV EXYNOS_CLKREG(0x0C224)
+#define EXYNOS4_CLKSRC_MFC EXYNOS_CLKREG(0x0C228)
+#define EXYNOS4_CLKSRC_G3D EXYNOS_CLKREG(0x0C22C)
+#define EXYNOS4_CLKSRC_IMAGE EXYNOS_CLKREG(0x0C230)
+#define EXYNOS4_CLKSRC_LCD0 EXYNOS_CLKREG(0x0C234)
+#define EXYNOS4_CLKSRC_MAUDIO EXYNOS_CLKREG(0x0C23C)
+#define EXYNOS4_CLKSRC_FSYS EXYNOS_CLKREG(0x0C240)
+#define EXYNOS4_CLKSRC_PERIL0 EXYNOS_CLKREG(0x0C250)
+#define EXYNOS4_CLKSRC_PERIL1 EXYNOS_CLKREG(0x0C254)
-#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
-#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
-#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324)
-#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
-#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C)
-#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
-#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
-#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
+#define EXYNOS4_CLKSRC_MASK_TOP EXYNOS_CLKREG(0x0C310)
+#define EXYNOS4_CLKSRC_MASK_CAM EXYNOS_CLKREG(0x0C320)
+#define EXYNOS4_CLKSRC_MASK_TV EXYNOS_CLKREG(0x0C324)
+#define EXYNOS4_CLKSRC_MASK_LCD0 EXYNOS_CLKREG(0x0C334)
+#define EXYNOS4_CLKSRC_MASK_MAUDIO EXYNOS_CLKREG(0x0C33C)
+#define EXYNOS4_CLKSRC_MASK_FSYS EXYNOS_CLKREG(0x0C340)
+#define EXYNOS4_CLKSRC_MASK_PERIL0 EXYNOS_CLKREG(0x0C350)
+#define EXYNOS4_CLKSRC_MASK_PERIL1 EXYNOS_CLKREG(0x0C354)
-#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510)
-#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520)
-#define S5P_CLKDIV_TV S5P_CLKREG(0x0C524)
-#define S5P_CLKDIV_MFC S5P_CLKREG(0x0C528)
-#define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C)
-#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530)
-#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534)
-#define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C)
-#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540)
-#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544)
-#define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548)
-#define S5P_CLKDIV_FSYS3 S5P_CLKREG(0x0C54C)
-#define S5P_CLKDIV_PERIL0 S5P_CLKREG(0x0C550)
-#define S5P_CLKDIV_PERIL1 S5P_CLKREG(0x0C554)
-#define S5P_CLKDIV_PERIL2 S5P_CLKREG(0x0C558)
-#define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x0C55C)
-#define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560)
-#define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564)
-#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580)
+#define EXYNOS4_CLKDIV_TOP EXYNOS_CLKREG(0x0C510)
+#define EXYNOS4_CLKDIV_CAM EXYNOS_CLKREG(0x0C520)
+#define EXYNOS4_CLKDIV_TV EXYNOS_CLKREG(0x0C524)
+#define EXYNOS4_CLKDIV_MFC EXYNOS_CLKREG(0x0C528)
+#define EXYNOS4_CLKDIV_G3D EXYNOS_CLKREG(0x0C52C)
+#define EXYNOS4_CLKDIV_IMAGE EXYNOS_CLKREG(0x0C530)
+#define EXYNOS4_CLKDIV_LCD0 EXYNOS_CLKREG(0x0C534)
+#define EXYNOS4_CLKDIV_MAUDIO EXYNOS_CLKREG(0x0C53C)
+#define EXYNOS4_CLKDIV_FSYS0 EXYNOS_CLKREG(0x0C540)
+#define EXYNOS4_CLKDIV_FSYS1 EXYNOS_CLKREG(0x0C544)
+#define EXYNOS4_CLKDIV_FSYS2 EXYNOS_CLKREG(0x0C548)
+#define EXYNOS4_CLKDIV_FSYS3 EXYNOS_CLKREG(0x0C54C)
+#define EXYNOS4_CLKDIV_PERIL0 EXYNOS_CLKREG(0x0C550)
+#define EXYNOS4_CLKDIV_PERIL1 EXYNOS_CLKREG(0x0C554)
+#define EXYNOS4_CLKDIV_PERIL2 EXYNOS_CLKREG(0x0C558)
+#define EXYNOS4_CLKDIV_PERIL3 EXYNOS_CLKREG(0x0C55C)
+#define EXYNOS4_CLKDIV_PERIL4 EXYNOS_CLKREG(0x0C560)
+#define EXYNOS4_CLKDIV_PERIL5 EXYNOS_CLKREG(0x0C564)
+#define EXYNOS4_CLKDIV2_RATIO EXYNOS_CLKREG(0x0C580)
-#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610)
+#define EXYNOS4_CLKDIV_STAT_TOP EXYNOS_CLKREG(0x0C610)
+#define EXYNOS4_CLKDIV_STAT_MFC EXYNOS_CLKREG(0x0C628)
-#define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820)
-#define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920)
-#define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924)
-#define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928)
-#define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C)
-#define S5P_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \
- S5P_CLKREG(0x0C930) : \
- S5P_CLKREG(0x04930))
-#define S5P_CLKGATE_IP_IMAGE_4210 S5P_CLKREG(0x0C930)
-#define S5P_CLKGATE_IP_IMAGE_4212 S5P_CLKREG(0x04930)
-#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934)
-#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940)
-#define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C)
-#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950)
-#define S5P_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \
- S5P_CLKREG(0x0C960) : \
- S5P_CLKREG(0x08960))
-#define S5P_CLKGATE_IP_PERIR_4210 S5P_CLKREG(0x0C960)
-#define S5P_CLKGATE_IP_PERIR_4212 S5P_CLKREG(0x08960)
-#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970)
+#define EXYNOS4_CLKGATE_SCLKCAM EXYNOS_CLKREG(0x0C820)
+#define EXYNOS4_CLKGATE_IP_CAM EXYNOS_CLKREG(0x0C920)
+#define EXYNOS4_CLKGATE_IP_TV EXYNOS_CLKREG(0x0C924)
+#define EXYNOS4_CLKGATE_IP_MFC EXYNOS_CLKREG(0x0C928)
+#define EXYNOS4_CLKGATE_IP_G3D EXYNOS_CLKREG(0x0C92C)
+#define EXYNOS4_CLKGATE_IP_IMAGE (soc_is_exynos4210() ? \
+ EXYNOS_CLKREG(0x0C930) : \
+ EXYNOS_CLKREG(0x04930))
+#define EXYNOS4210_CLKGATE_IP_IMAGE EXYNOS_CLKREG(0x0C930)
+#define EXYNOS4212_CLKGATE_IP_IMAGE EXYNOS_CLKREG(0x04930)
+#define EXYNOS4_CLKGATE_IP_LCD0 EXYNOS_CLKREG(0x0C934)
+#define EXYNOS4_CLKGATE_IP_FSYS EXYNOS_CLKREG(0x0C940)
+#define EXYNOS4_CLKGATE_IP_GPS EXYNOS_CLKREG(0x0C94C)
+#define EXYNOS4_CLKGATE_IP_PERIL EXYNOS_CLKREG(0x0C950)
+#define EXYNOS4_CLKGATE_IP_PERIR (soc_is_exynos4210() ? \
+ EXYNOS_CLKREG(0x0C960) : \
+ EXYNOS_CLKREG(0x08960))
+#define EXYNOS4210_CLKGATE_IP_PERIR EXYNOS_CLKREG(0x0C960)
+#define EXYNOS4212_CLKGATE_IP_PERIR EXYNOS_CLKREG(0x08960)
+#define EXYNOS4_CLKGATE_BLOCK EXYNOS_CLKREG(0x0C970)
-#define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300)
-#define S5P_CLKSRC_DMC S5P_CLKREG(0x10200)
-#define S5P_CLKDIV_DMC0 S5P_CLKREG(0x10500)
-#define S5P_CLKDIV_DMC1 S5P_CLKREG(0x10504)
-#define S5P_CLKDIV_STAT_DMC0 S5P_CLKREG(0x10600)
-#define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900)
+#define EXYNOS4_CLKSRC_MASK_DMC EXYNOS_CLKREG(0x10300)
+#define EXYNOS4_CLKSRC_DMC EXYNOS_CLKREG(0x10200)
+#define EXYNOS4_CLKDIV_DMC0 EXYNOS_CLKREG(0x10500)
+#define EXYNOS4_CLKDIV_DMC1 EXYNOS_CLKREG(0x10504)
+#define EXYNOS4_CLKDIV_STAT_DMC0 EXYNOS_CLKREG(0x10600)
+#define EXYNOS4_CLKDIV_STAT_DMC1 EXYNOS_CLKREG(0x10604)
+#define EXYNOS4_CLKGATE_IP_DMC EXYNOS_CLKREG(0x10900)
-#define S5P_APLL_LOCK S5P_CLKREG(0x14000)
-#define S5P_MPLL_LOCK (soc_is_exynos4210() ? \
- S5P_CLKREG(0x14004) : \
- S5P_CLKREG(0x10008))
-#define S5P_APLL_CON0 S5P_CLKREG(0x14100)
-#define S5P_APLL_CON1 S5P_CLKREG(0x14104)
-#define S5P_MPLL_CON0 (soc_is_exynos4210() ? \
- S5P_CLKREG(0x14108) : \
- S5P_CLKREG(0x10108))
-#define S5P_MPLL_CON1 (soc_is_exynos4210() ? \
- S5P_CLKREG(0x1410C) : \
- S5P_CLKREG(0x1010C))
+#define EXYNOS4_DMC_PAUSE_CTRL EXYNOS_CLKREG(0x11094)
+#define EXYNOS4_DMC_PAUSE_ENABLE (1 << 0)
-#define S5P_CLKSRC_CPU S5P_CLKREG(0x14200)
-#define S5P_CLKMUX_STATCPU S5P_CLKREG(0x14400)
+#define EXYNOS4_APLL_LOCK EXYNOS_CLKREG(0x14000)
+#define EXYNOS4_MPLL_LOCK (soc_is_exynos4210() ? \
+ EXYNOS_CLKREG(0x14004) : \
+ EXYNOS_CLKREG(0x10008))
+#define EXYNOS4_APLL_CON0 EXYNOS_CLKREG(0x14100)
+#define EXYNOS4_APLL_CON1 EXYNOS_CLKREG(0x14104)
+#define EXYNOS4_MPLL_CON0 (soc_is_exynos4210() ? \
+ EXYNOS_CLKREG(0x14108) : \
+ EXYNOS_CLKREG(0x10108))
+#define EXYNOS4_MPLL_CON1 (soc_is_exynos4210() ? \
+ EXYNOS_CLKREG(0x1410C) : \
+ EXYNOS_CLKREG(0x1010C))
-#define S5P_CLKDIV_CPU S5P_CLKREG(0x14500)
-#define S5P_CLKDIV_CPU1 S5P_CLKREG(0x14504)
-#define S5P_CLKDIV_STATCPU S5P_CLKREG(0x14600)
-#define S5P_CLKDIV_STATCPU1 S5P_CLKREG(0x14604)
+#define EXYNOS4_CLKSRC_CPU EXYNOS_CLKREG(0x14200)
+#define EXYNOS4_CLKMUX_STATCPU EXYNOS_CLKREG(0x14400)
-#define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800)
-#define S5P_CLKGATE_IP_CPU S5P_CLKREG(0x14900)
+#define EXYNOS4_CLKDIV_CPU EXYNOS_CLKREG(0x14500)
+#define EXYNOS4_CLKDIV_CPU1 EXYNOS_CLKREG(0x14504)
+#define EXYNOS4_CLKDIV_STATCPU EXYNOS_CLKREG(0x14600)
+#define EXYNOS4_CLKDIV_STATCPU1 EXYNOS_CLKREG(0x14604)
-#define S5P_APLL_LOCKTIME (0x1C20) /* 300us */
+#define EXYNOS4_CLKGATE_SCLKCPU EXYNOS_CLKREG(0x14800)
+#define EXYNOS4_CLKGATE_IP_CPU EXYNOS_CLKREG(0x14900)
-#define S5P_APLLCON0_ENABLE_SHIFT (31)
-#define S5P_APLLCON0_LOCKED_SHIFT (29)
-#define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1)
-#define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1)
+#define EXYNOS4_APLL_LOCKTIME (0x1C20) /* 300us */
-#define S5P_EPLLCON0_ENABLE_SHIFT (31)
-#define S5P_EPLLCON0_LOCKED_SHIFT (29)
+#define EXYNOS4_APLLCON0_ENABLE_SHIFT (31)
+#define EXYNOS4_APLLCON0_LOCKED_SHIFT (29)
+#define EXYNOS4_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1)
+#define EXYNOS4_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1)
-#define S5P_VPLLCON0_ENABLE_SHIFT (31)
-#define S5P_VPLLCON0_LOCKED_SHIFT (29)
+#define EXYNOS4_EPLLCON0_ENABLE_SHIFT (31)
+#define EXYNOS4_EPLLCON0_LOCKED_SHIFT (29)
-#define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16)
-#define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)
+#define EXYNOS4_VPLLCON0_ENABLE_SHIFT (31)
+#define EXYNOS4_VPLLCON0_LOCKED_SHIFT (29)
-#define S5P_CLKDIV_CPU0_CORE_SHIFT (0)
-#define S5P_CLKDIV_CPU0_CORE_MASK (0x7 << S5P_CLKDIV_CPU0_CORE_SHIFT)
-#define S5P_CLKDIV_CPU0_COREM0_SHIFT (4)
-#define S5P_CLKDIV_CPU0_COREM0_MASK (0x7 << S5P_CLKDIV_CPU0_COREM0_SHIFT)
-#define S5P_CLKDIV_CPU0_COREM1_SHIFT (8)
-#define S5P_CLKDIV_CPU0_COREM1_MASK (0x7 << S5P_CLKDIV_CPU0_COREM1_SHIFT)
-#define S5P_CLKDIV_CPU0_PERIPH_SHIFT (12)
-#define S5P_CLKDIV_CPU0_PERIPH_MASK (0x7 << S5P_CLKDIV_CPU0_PERIPH_SHIFT)
-#define S5P_CLKDIV_CPU0_ATB_SHIFT (16)
-#define S5P_CLKDIV_CPU0_ATB_MASK (0x7 << S5P_CLKDIV_CPU0_ATB_SHIFT)
-#define S5P_CLKDIV_CPU0_PCLKDBG_SHIFT (20)
-#define S5P_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT)
-#define S5P_CLKDIV_CPU0_APLL_SHIFT (24)
-#define S5P_CLKDIV_CPU0_APLL_MASK (0x7 << S5P_CLKDIV_CPU0_APLL_SHIFT)
+#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16)
+#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)
-#define S5P_CLKDIV_DMC0_ACP_SHIFT (0)
-#define S5P_CLKDIV_DMC0_ACP_MASK (0x7 << S5P_CLKDIV_DMC0_ACP_SHIFT)
-#define S5P_CLKDIV_DMC0_ACPPCLK_SHIFT (4)
-#define S5P_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT)
-#define S5P_CLKDIV_DMC0_DPHY_SHIFT (8)
-#define S5P_CLKDIV_DMC0_DPHY_MASK (0x7 << S5P_CLKDIV_DMC0_DPHY_SHIFT)
-#define S5P_CLKDIV_DMC0_DMC_SHIFT (12)
-#define S5P_CLKDIV_DMC0_DMC_MASK (0x7 << S5P_CLKDIV_DMC0_DMC_SHIFT)
-#define S5P_CLKDIV_DMC0_DMCD_SHIFT (16)
-#define S5P_CLKDIV_DMC0_DMCD_MASK (0x7 << S5P_CLKDIV_DMC0_DMCD_SHIFT)
-#define S5P_CLKDIV_DMC0_DMCP_SHIFT (20)
-#define S5P_CLKDIV_DMC0_DMCP_MASK (0x7 << S5P_CLKDIV_DMC0_DMCP_SHIFT)
-#define S5P_CLKDIV_DMC0_COPY2_SHIFT (24)
-#define S5P_CLKDIV_DMC0_COPY2_MASK (0x7 << S5P_CLKDIV_DMC0_COPY2_SHIFT)
-#define S5P_CLKDIV_DMC0_CORETI_SHIFT (28)
-#define S5P_CLKDIV_DMC0_CORETI_MASK (0x7 << S5P_CLKDIV_DMC0_CORETI_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_CORE_SHIFT (0)
+#define EXYNOS4_CLKDIV_CPU0_CORE_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_CORE_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT (4)
+#define EXYNOS4_CLKDIV_CPU0_COREM0_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_COREM0_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT (8)
+#define EXYNOS4_CLKDIV_CPU0_COREM1_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_COREM1_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT (12)
+#define EXYNOS4_CLKDIV_CPU0_PERIPH_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_PERIPH_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_ATB_SHIFT (16)
+#define EXYNOS4_CLKDIV_CPU0_ATB_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_ATB_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT (20)
+#define EXYNOS4_CLKDIV_CPU0_PCLKDBG_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_PCLKDBG_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_APLL_SHIFT (24)
+#define EXYNOS4_CLKDIV_CPU0_APLL_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_APLL_SHIFT)
+#define EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT 28
+#define EXYNOS4_CLKDIV_CPU0_CORE2_MASK (0x7 << EXYNOS4_CLKDIV_CPU0_CORE2_SHIFT)
-#define S5P_CLKDIV_TOP_ACLK200_SHIFT (0)
-#define S5P_CLKDIV_TOP_ACLK200_MASK (0x7 << S5P_CLKDIV_TOP_ACLK200_SHIFT)
-#define S5P_CLKDIV_TOP_ACLK100_SHIFT (4)
-#define S5P_CLKDIV_TOP_ACLK100_MASK (0xf << S5P_CLKDIV_TOP_ACLK100_SHIFT)
-#define S5P_CLKDIV_TOP_ACLK160_SHIFT (8)
-#define S5P_CLKDIV_TOP_ACLK160_MASK (0x7 << S5P_CLKDIV_TOP_ACLK160_SHIFT)
-#define S5P_CLKDIV_TOP_ACLK133_SHIFT (12)
-#define S5P_CLKDIV_TOP_ACLK133_MASK (0x7 << S5P_CLKDIV_TOP_ACLK133_SHIFT)
-#define S5P_CLKDIV_TOP_ONENAND_SHIFT (16)
-#define S5P_CLKDIV_TOP_ONENAND_MASK (0x7 << S5P_CLKDIV_TOP_ONENAND_SHIFT)
+#define EXYNOS4_CLKDIV_CPU1_COPY_SHIFT 0
+#define EXYNOS4_CLKDIV_CPU1_COPY_MASK (0x7 << EXYNOS4_CLKDIV_CPU1_COPY_SHIFT)
+#define EXYNOS4_CLKDIV_CPU1_HPM_SHIFT 4
+#define EXYNOS4_CLKDIV_CPU1_HPM_MASK (0x7 << EXYNOS4_CLKDIV_CPU1_HPM_SHIFT)
+#define EXYNOS4_CLKDIV_CPU1_CORES_SHIFT 8
+#define EXYNOS4_CLKDIV_CPU1_CORES_MASK (0x7 << EXYNOS4_CLKDIV_CPU1_CORES_SHIFT)
-#define S5P_CLKDIV_BUS_GDLR_SHIFT (0)
-#define S5P_CLKDIV_BUS_GDLR_MASK (0x7 << S5P_CLKDIV_BUS_GDLR_SHIFT)
-#define S5P_CLKDIV_BUS_GPLR_SHIFT (4)
-#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_ACP_SHIFT (0)
+#define EXYNOS4_CLKDIV_DMC0_ACP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACP_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT (4)
+#define EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT (8)
+#define EXYNOS4_CLKDIV_DMC0_DPHY_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_DMC_SHIFT (12)
+#define EXYNOS4_CLKDIV_DMC0_DMC_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMC_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT (16)
+#define EXYNOS4_CLKDIV_DMC0_DMCD_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT (20)
+#define EXYNOS4_CLKDIV_DMC0_DMCP_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT (24)
+#define EXYNOS4_CLKDIV_DMC0_COPY2_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT)
+#define EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT (28)
+#define EXYNOS4_CLKDIV_DMC0_CORETI_MASK (0x7 << EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT)
+
+#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT (0)
+#define EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK (0xf << EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT)
+#define EXYNOS4_CLKDIV_DMC1_C2C_SHIFT (4)
+#define EXYNOS4_CLKDIV_DMC1_C2C_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2C_SHIFT)
+#define EXYNOS4_CLKDIV_DMC1_PWI_SHIFT (8)
+#define EXYNOS4_CLKDIV_DMC1_PWI_MASK (0xf << EXYNOS4_CLKDIV_DMC1_PWI_SHIFT)
+#define EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT (12)
+#define EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK (0x7 << EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT)
+#define EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT (16)
+#define EXYNOS4_CLKDIV_DMC1_DVSEM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DVSEM_SHIFT)
+#define EXYNOS4_CLKDIV_DMC1_DPM_SHIFT (24)
+#define EXYNOS4_CLKDIV_DMC1_DPM_MASK (0x7f << EXYNOS4_CLKDIV_DMC1_DPM_SHIFT)
+
+#define EXYNOS4_CLKDIV_MFC_SHIFT (0)
+#define EXYNOS4_CLKDIV_MFC_MASK (0x7 << EXYNOS4_CLKDIV_MFC_SHIFT)
+
+#define EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT (0)
+#define EXYNOS4_CLKDIV_TOP_ACLK200_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT)
+#define EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT (4)
+#define EXYNOS4_CLKDIV_TOP_ACLK100_MASK (0xF << EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT)
+#define EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT (8)
+#define EXYNOS4_CLKDIV_TOP_ACLK160_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT)
+#define EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT (12)
+#define EXYNOS4_CLKDIV_TOP_ACLK133_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT)
+#define EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT (16)
+#define EXYNOS4_CLKDIV_TOP_ONENAND_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT)
+#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT (20)
+#define EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT)
+#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT (24)
+#define EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_MASK (0x7 << EXYNOS4_CLKDIV_TOP_ACLK400_MCUISP_SHIFT)
+
+#define EXYNOS4_CLKDIV_BUS_GDLR_SHIFT (0)
+#define EXYNOS4_CLKDIV_BUS_GDLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GDLR_SHIFT)
+#define EXYNOS4_CLKDIV_BUS_GPLR_SHIFT (4)
+#define EXYNOS4_CLKDIV_BUS_GPLR_MASK (0x7 << EXYNOS4_CLKDIV_BUS_GPLR_SHIFT)
+
+#define EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT (0)
+#define EXYNOS4_CLKDIV_CAM_FIMC0_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT)
+#define EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT (4)
+#define EXYNOS4_CLKDIV_CAM_FIMC1_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT)
+#define EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT (8)
+#define EXYNOS4_CLKDIV_CAM_FIMC2_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT)
+#define EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT (12)
+#define EXYNOS4_CLKDIV_CAM_FIMC3_MASK (0xf << EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT)
/* Only for EXYNOS4210 */
-#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
-#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
-#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
-#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
+#define EXYNOS4210_CLKSRC_LCD1 EXYNOS_CLKREG(0x0C238)
+#define EXYNOS4210_CLKSRC_MASK_LCD1 EXYNOS_CLKREG(0x0C338)
+#define EXYNOS4210_CLKDIV_LCD1 EXYNOS_CLKREG(0x0C538)
+#define EXYNOS4210_CLKGATE_IP_LCD1 EXYNOS_CLKREG(0x0C938)
+
+/* Only for EXYNOS4212 */
+
+#define EXYNOS4_CLKDIV_CAM1 EXYNOS_CLKREG(0x0C568)
+
+#define EXYNOS4_CLKDIV_STAT_CAM1 EXYNOS_CLKREG(0x0C668)
+
+#define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT (0)
+#define EXYNOS4_CLKDIV_CAM1_JPEG_MASK (0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)
+
+/* For EXYNOS5250 */
+
+#define EXYNOS5_APLL_CON0 EXYNOS_CLKREG(0x00100)
+#define EXYNOS5_CLKSRC_CPU EXYNOS_CLKREG(0x00200)
+#define EXYNOS5_CLKDIV_CPU0 EXYNOS_CLKREG(0x00500)
+#define EXYNOS5_MPLL_CON0 EXYNOS_CLKREG(0x04100)
+#define EXYNOS5_CLKSRC_CORE1 EXYNOS_CLKREG(0x04204)
+
+#define EXYNOS5_CLKGATE_IP_CORE EXYNOS_CLKREG(0x04900)
+
+#define EXYNOS5_CLKDIV_ACP EXYNOS_CLKREG(0x08500)
+
+#define EXYNOS5_CLKSRC_TOP2 EXYNOS_CLKREG(0x10218)
+#define EXYNOS5_EPLL_CON0 EXYNOS_CLKREG(0x10130)
+#define EXYNOS5_EPLL_CON1 EXYNOS_CLKREG(0x10134)
+#define EXYNOS5_VPLL_CON0 EXYNOS_CLKREG(0x10140)
+#define EXYNOS5_VPLL_CON1 EXYNOS_CLKREG(0x10144)
+#define EXYNOS5_CPLL_CON0 EXYNOS_CLKREG(0x10120)
+
+#define EXYNOS5_CLKSRC_TOP0 EXYNOS_CLKREG(0x10210)
+#define EXYNOS5_CLKSRC_TOP3 EXYNOS_CLKREG(0x1021C)
+#define EXYNOS5_CLKSRC_GSCL EXYNOS_CLKREG(0x10220)
+#define EXYNOS5_CLKSRC_DISP1_0 EXYNOS_CLKREG(0x1022C)
+#define EXYNOS5_CLKSRC_FSYS EXYNOS_CLKREG(0x10244)
+#define EXYNOS5_CLKSRC_PERIC0 EXYNOS_CLKREG(0x10250)
+
+#define EXYNOS5_CLKSRC_MASK_TOP EXYNOS_CLKREG(0x10310)
+#define EXYNOS5_CLKSRC_MASK_GSCL EXYNOS_CLKREG(0x10320)
+#define EXYNOS5_CLKSRC_MASK_DISP1_0 EXYNOS_CLKREG(0x1032C)
+#define EXYNOS5_CLKSRC_MASK_FSYS EXYNOS_CLKREG(0x10340)
+#define EXYNOS5_CLKSRC_MASK_PERIC0 EXYNOS_CLKREG(0x10350)
+
+#define EXYNOS5_CLKDIV_TOP0 EXYNOS_CLKREG(0x10510)
+#define EXYNOS5_CLKDIV_TOP1 EXYNOS_CLKREG(0x10514)
+#define EXYNOS5_CLKDIV_GSCL EXYNOS_CLKREG(0x10520)
+#define EXYNOS5_CLKDIV_DISP1_0 EXYNOS_CLKREG(0x1052C)
+#define EXYNOS5_CLKDIV_GEN EXYNOS_CLKREG(0x1053C)
+#define EXYNOS5_CLKDIV_FSYS0 EXYNOS_CLKREG(0x10548)
+#define EXYNOS5_CLKDIV_FSYS1 EXYNOS_CLKREG(0x1054C)
+#define EXYNOS5_CLKDIV_FSYS2 EXYNOS_CLKREG(0x10550)
+#define EXYNOS5_CLKDIV_FSYS3 EXYNOS_CLKREG(0x10554)
+#define EXYNOS5_CLKDIV_PERIC0 EXYNOS_CLKREG(0x10558)
+
+#define EXYNOS5_CLKGATE_IP_ACP EXYNOS_CLKREG(0x08800)
+#define EXYNOS5_CLKGATE_IP_GSCL EXYNOS_CLKREG(0x10920)
+#define EXYNOS5_CLKGATE_IP_DISP1 EXYNOS_CLKREG(0x10928)
+#define EXYNOS5_CLKGATE_IP_MFC EXYNOS_CLKREG(0x1092C)
+#define EXYNOS5_CLKGATE_IP_GEN EXYNOS_CLKREG(0x10934)
+#define EXYNOS5_CLKGATE_IP_FSYS EXYNOS_CLKREG(0x10944)
+#define EXYNOS5_CLKGATE_IP_GPS EXYNOS_CLKREG(0x1094C)
+#define EXYNOS5_CLKGATE_IP_PERIC EXYNOS_CLKREG(0x10950)
+#define EXYNOS5_CLKGATE_IP_PERIS EXYNOS_CLKREG(0x10960)
+#define EXYNOS5_CLKGATE_BLOCK EXYNOS_CLKREG(0x10980)
+
+#define EXYNOS5_BPLL_CON0 EXYNOS_CLKREG(0x20110)
+#define EXYNOS5_CLKSRC_CDREX EXYNOS_CLKREG(0x20200)
+#define EXYNOS5_CLKDIV_CDREX EXYNOS_CLKREG(0x20500)
+
+#define EXYNOS5_EPLL_LOCK EXYNOS_CLKREG(0x10030)
+
+#define EXYNOS5_EPLLCON0_LOCKED_SHIFT (29)
/* Compatibility defines and inclusion */
#include <mach/regs-pmu.h>
-#define S5P_EPLL_CON S5P_EPLL_CON0
+#define S5P_EPLL_CON EXYNOS4_EPLL_CON0
#endif /* __ASM_ARCH_REGS_CLOCK_H */
diff --git a/arch/arm/mach-exynos/include/mach/regs-gpio.h b/arch/arm/mach-exynos/include/mach/regs-gpio.h
index 1401b21..e4b5b60 100644
--- a/arch/arm/mach-exynos/include/mach/regs-gpio.h
+++ b/arch/arm/mach-exynos/include/mach/regs-gpio.h
@@ -16,6 +16,15 @@
#include <mach/map.h>
#include <mach/irqs.h>
+#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
+#define EINT_CON(b, x) (b + 0xE00 + (EINT_REG_NR(x) * 4))
+#define EINT_FLTCON(b, x) (b + 0xE80 + (EINT_REG_NR(x) * 4))
+#define EINT_MASK(b, x) (b + 0xF00 + (EINT_REG_NR(x) * 4))
+#define EINT_PEND(b, x) (b + 0xF40 + (EINT_REG_NR(x) * 4))
+
+#define EINT_OFFSET_BIT(x) (1 << (EINT_OFFSET(x) & 0x7))
+
+/* compatibility for plat-s5p/irq-pm.c */
#define EXYNOS4_EINT40CON (S5P_VA_GPIO2 + 0xE00)
#define S5P_EINT_CON(x) (EXYNOS4_EINT40CON + ((x) * 0x4))
@@ -28,15 +37,4 @@
#define EXYNOS4_EINT40PEND (S5P_VA_GPIO2 + 0xF40)
#define S5P_EINT_PEND(x) (EXYNOS4_EINT40PEND + ((x) * 0x4))
-#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
-
-#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
-
-#define EINT_MODE S3C_GPIO_SFN(0xf)
-
-#define EINT_GPIO_0(x) EXYNOS4_GPX0(x)
-#define EINT_GPIO_1(x) EXYNOS4_GPX1(x)
-#define EINT_GPIO_2(x) EXYNOS4_GPX2(x)
-#define EINT_GPIO_3(x) EXYNOS4_GPX3(x)
-
#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index 4fff8e9..4c53f38 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -31,6 +31,7 @@
#define S5P_USE_STANDBYWFE_ISP_ARM (1 << 26)
#define S5P_SWRESET S5P_PMUREG(0x0400)
+#define EXYNOS_SWRESET S5P_PMUREG(0x0400)
#define S5P_WAKEUP_STAT S5P_PMUREG(0x0600)
#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604)
diff --git a/arch/arm/mach-exynos/include/mach/system.h b/arch/arm/mach-exynos/include/mach/system.h
deleted file mode 100644
index 0063a6d..0000000
--- a/arch/arm/mach-exynos/include/mach/system.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/system.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h
index 21d97bc..493f4f3 100644
--- a/arch/arm/mach-exynos/include/mach/uncompress.h
+++ b/arch/arm/mach-exynos/include/mach/uncompress.h
@@ -1,9 +1,8 @@
-/* linux/arch/arm/mach-exynos4/include/mach/uncompress.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * EXYNOS4 - uncompress code
+ * EXYNOS - uncompress code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -13,12 +12,20 @@
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H __FILE__
+#include <asm/mach-types.h>
+
#include <mach/map.h>
+
+volatile u8 *uart_base;
+
#include <plat/uncompress.h>
static void arch_detect_cpu(void)
{
- /* we do not need to do any cpu detection here at the moment. */
+ if (machine_is_smdk5250())
+ uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
+ else
+ uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
/*
* For preventing FIFO overrun or infinite loop of UART console,
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index e6b02fd..8245f1c 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -37,13 +37,13 @@
* data from the device tree.
*/
static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
- OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART0,
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0,
"exynos4210-uart.0", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART1,
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1,
"exynos4210-uart.1", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART2,
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART2,
"exynos4210-uart.2", NULL),
- OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART3,
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART3,
"exynos4210-uart.3", NULL),
OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0),
"exynos4-sdhci.0", NULL),
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
new file mode 100644
index 0000000..0d26f50
--- /dev/null
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -0,0 +1,78 @@
+/*
+ * SAMSUNG EXYNOS5250 Flattened Device Tree enabled machine
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/of_platform.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+/*
+ * The following lookup table is used to override device names when devices
+ * are registered from device tree. This is temporarily added to enable
+ * device tree support addition for the EXYNOS5 architecture.
+ *
+ * For drivers that require platform data to be provided from the machine
+ * file, a platform data pointer can also be supplied along with the
+ * devices names. Usually, the platform data elements that cannot be parsed
+ * from the device tree by the drivers (example: function pointers) are
+ * supplied. But it should be noted that this is a temporary mechanism and
+ * at some point, the drivers should be capable of parsing all the platform
+ * data from the device tree.
+ */
+static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART0,
+ "exynos4210-uart.0", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART1,
+ "exynos4210-uart.1", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART2,
+ "exynos4210-uart.2", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
+ "exynos4210-uart.3", NULL),
+ OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
+ OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
+ OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL),
+ {},
+};
+
+static void __init exynos5250_dt_map_io(void)
+{
+ exynos_init_io(NULL, 0);
+ s3c24xx_init_clocks(24000000);
+}
+
+static void __init exynos5250_dt_machine_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ exynos5250_auxdata_lookup, NULL);
+}
+
+static char const *exynos5250_dt_compat[] __initdata = {
+ "samsung,exynos5250",
+ NULL
+};
+
+DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .init_irq = exynos5_init_irq,
+ .map_io = exynos5250_dt_map_io,
+ .handle_irq = gic_handle_irq,
+ .init_machine = exynos5250_dt_machine_init,
+ .timer = &exynos4_timer,
+ .dt_compat = exynos5250_dt_compat,
+ .restart = exynos5_restart,
+MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 0679b8a..3ec3ccf 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -412,7 +412,7 @@
{ MAX8997_BUCK7, &max8997_buck7_data },
};
-struct max8997_platform_data __initdata origen_max8997_pdata = {
+static struct max8997_platform_data __initdata origen_max8997_pdata = {
.num_regulators = ARRAY_SIZE(origen_max8997_regulators),
.regulators = origen_max8997_regulators,
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 3893995..5ca91ec 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -999,7 +999,7 @@
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
}
-void s5p_tv_setup(void)
+static void s5p_tv_setup(void)
{
/* direct HPD to HDMI chip */
gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 85b5527..cae3e2d 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -29,12 +29,13 @@
#include <mach/regs-mct.h>
#include <asm/mach/time.h>
+#define TICK_BASE_CNT 1
+
enum {
MCT_INT_SPI,
MCT_INT_PPI
};
-static unsigned long clk_cnt_per_tick;
static unsigned long clk_rate;
static unsigned int mct_int_type;
@@ -205,11 +206,14 @@
static void exynos4_comp_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
+ unsigned long cycles_per_jiffy;
exynos4_mct_comp0_stop();
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- exynos4_mct_comp0_start(mode, clk_cnt_per_tick);
+ cycles_per_jiffy =
+ (((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift);
+ exynos4_mct_comp0_start(mode, cycles_per_jiffy);
break;
case CLOCK_EVT_MODE_ONESHOT:
@@ -248,9 +252,7 @@
static void exynos4_clockevent_init(void)
{
- clk_cnt_per_tick = clk_rate / 2 / HZ;
-
- clockevents_calc_mult_shift(&mct_comp_device, clk_rate / 2, 5);
+ clockevents_calc_mult_shift(&mct_comp_device, clk_rate, 5);
mct_comp_device.max_delta_ns =
clockevent_delta2ns(0xffffffff, &mct_comp_device);
mct_comp_device.min_delta_ns =
@@ -258,7 +260,10 @@
mct_comp_device.cpumask = cpumask_of(0);
clockevents_register_device(&mct_comp_device);
- setup_irq(IRQ_MCT_G0, &mct_comp_event_irq);
+ if (soc_is_exynos5250())
+ setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq);
+ else
+ setup_irq(EXYNOS4_IRQ_MCT_G0, &mct_comp_event_irq);
}
#ifdef CONFIG_LOCAL_TIMERS
@@ -314,12 +319,15 @@
struct clock_event_device *evt)
{
struct mct_clock_event_device *mevt = this_cpu_ptr(&percpu_mct_tick);
+ unsigned long cycles_per_jiffy;
exynos4_mct_tick_stop(mevt);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- exynos4_mct_tick_start(clk_cnt_per_tick, mevt);
+ cycles_per_jiffy =
+ (((unsigned long long) NSEC_PER_SEC / HZ * evt->mult) >> evt->shift);
+ exynos4_mct_tick_start(cycles_per_jiffy, mevt);
break;
case CLOCK_EVT_MODE_ONESHOT:
@@ -393,7 +401,7 @@
evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
evt->rating = 450;
- clockevents_calc_mult_shift(evt, clk_rate / 2, 5);
+ clockevents_calc_mult_shift(evt, clk_rate / (TICK_BASE_CNT + 1), 5);
evt->max_delta_ns =
clockevent_delta2ns(0x7fffffff, evt);
evt->min_delta_ns =
@@ -401,21 +409,21 @@
clockevents_register_device(evt);
- exynos4_mct_write(0x1, mevt->base + MCT_L_TCNTB_OFFSET);
+ exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
if (mct_int_type == MCT_INT_SPI) {
if (cpu == 0) {
mct_tick0_event_irq.dev_id = mevt;
- evt->irq = IRQ_MCT_L0;
- setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+ evt->irq = EXYNOS4_IRQ_MCT_L0;
+ setup_irq(EXYNOS4_IRQ_MCT_L0, &mct_tick0_event_irq);
} else {
mct_tick1_event_irq.dev_id = mevt;
- evt->irq = IRQ_MCT_L1;
- setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
- irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+ evt->irq = EXYNOS4_IRQ_MCT_L1;
+ setup_irq(EXYNOS4_IRQ_MCT_L1, &mct_tick1_event_irq);
+ irq_set_affinity(EXYNOS4_IRQ_MCT_L1, cpumask_of(1));
}
} else {
- enable_percpu_irq(IRQ_MCT_LOCALTIMER, 0);
+ enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
}
}
@@ -437,7 +445,7 @@
else
remove_irq(evt->irq, &mct_tick1_event_irq);
else
- disable_percpu_irq(IRQ_MCT_LOCALTIMER);
+ disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER);
}
#endif /* CONFIG_LOCAL_TIMERS */
@@ -452,11 +460,11 @@
if (mct_int_type == MCT_INT_PPI) {
int err;
- err = request_percpu_irq(IRQ_MCT_LOCALTIMER,
+ err = request_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER,
exynos4_mct_tick_isr, "MCT",
&percpu_mct_tick);
WARN(err, "MCT: can't request IRQ %d (%d)\n",
- IRQ_MCT_LOCALTIMER, err);
+ EXYNOS_IRQ_MCT_LOCALTIMER, err);
}
#endif /* CONFIG_LOCAL_TIMERS */
}
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 0f2035a..36c3984a 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -166,7 +166,10 @@
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
- ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+ if (soc_is_exynos5250())
+ ncores = 2;
+ else
+ ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
if (ncores > nr_cpu_ids) {
@@ -183,8 +186,8 @@
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
-
- scu_enable(scu_base_addr());
+ if (!soc_is_exynos5250())
+ scu_enable(scu_base_addr());
/*
* Write the address of secondary startup into the
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index e190130..428cfeb 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -38,29 +38,29 @@
#include <mach/pmu.h>
static struct sleep_save exynos4_set_clksrc[] = {
- { .reg = S5P_CLKSRC_MASK_TOP , .val = 0x00000001, },
- { .reg = S5P_CLKSRC_MASK_CAM , .val = 0x11111111, },
- { .reg = S5P_CLKSRC_MASK_TV , .val = 0x00000111, },
- { .reg = S5P_CLKSRC_MASK_LCD0 , .val = 0x00001111, },
- { .reg = S5P_CLKSRC_MASK_MAUDIO , .val = 0x00000001, },
- { .reg = S5P_CLKSRC_MASK_FSYS , .val = 0x01011111, },
- { .reg = S5P_CLKSRC_MASK_PERIL0 , .val = 0x01111111, },
- { .reg = S5P_CLKSRC_MASK_PERIL1 , .val = 0x01110111, },
- { .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, },
+ { .reg = EXYNOS4_CLKSRC_MASK_TOP , .val = 0x00000001, },
+ { .reg = EXYNOS4_CLKSRC_MASK_CAM , .val = 0x11111111, },
+ { .reg = EXYNOS4_CLKSRC_MASK_TV , .val = 0x00000111, },
+ { .reg = EXYNOS4_CLKSRC_MASK_LCD0 , .val = 0x00001111, },
+ { .reg = EXYNOS4_CLKSRC_MASK_MAUDIO , .val = 0x00000001, },
+ { .reg = EXYNOS4_CLKSRC_MASK_FSYS , .val = 0x01011111, },
+ { .reg = EXYNOS4_CLKSRC_MASK_PERIL0 , .val = 0x01111111, },
+ { .reg = EXYNOS4_CLKSRC_MASK_PERIL1 , .val = 0x01110111, },
+ { .reg = EXYNOS4_CLKSRC_MASK_DMC , .val = 0x00010000, },
};
static struct sleep_save exynos4210_set_clksrc[] = {
- { .reg = S5P_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
+ { .reg = EXYNOS4210_CLKSRC_MASK_LCD1 , .val = 0x00001111, },
};
static struct sleep_save exynos4_epll_save[] = {
- SAVE_ITEM(S5P_EPLL_CON0),
- SAVE_ITEM(S5P_EPLL_CON1),
+ SAVE_ITEM(EXYNOS4_EPLL_CON0),
+ SAVE_ITEM(EXYNOS4_EPLL_CON1),
};
static struct sleep_save exynos4_vpll_save[] = {
- SAVE_ITEM(S5P_VPLL_CON0),
- SAVE_ITEM(S5P_VPLL_CON1),
+ SAVE_ITEM(EXYNOS4_VPLL_CON0),
+ SAVE_ITEM(EXYNOS4_VPLL_CON1),
};
static struct sleep_save exynos4_core_save[] = {
@@ -155,13 +155,6 @@
SAVE_ITEM(S5P_SROM_BC3),
};
-static struct sleep_save exynos4_l2cc_save[] = {
- SAVE_ITEM(S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL),
- SAVE_ITEM(S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL),
- SAVE_ITEM(S5P_VA_L2CC + L2X0_PREFETCH_CTRL),
- SAVE_ITEM(S5P_VA_L2CC + L2X0_POWER_CTRL),
- SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL),
-};
/* For Cortex-A9 Diagnostic and Power control register */
static unsigned int save_arm_register[2];
@@ -182,7 +175,6 @@
u32 tmp;
s3c_pm_do_save(exynos4_core_save, ARRAY_SIZE(exynos4_core_save));
- s3c_pm_do_save(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save));
s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save));
@@ -239,7 +231,7 @@
locktime = (3000 / pll_in_rate) * p_div;
lockcnt = locktime * 10000 / (10000 / pll_in_rate);
- __raw_writel(lockcnt, S5P_EPLL_LOCK);
+ __raw_writel(lockcnt, EXYNOS4_EPLL_LOCK);
s3c_pm_do_restore_core(exynos4_epll_save,
ARRAY_SIZE(exynos4_epll_save));
@@ -257,7 +249,7 @@
locktime = 750;
lockcnt = locktime * 10000 / (10000 / pll_in_rate);
- __raw_writel(lockcnt, S5P_VPLL_LOCK);
+ __raw_writel(lockcnt, EXYNOS4_VPLL_LOCK);
s3c_pm_do_restore_core(exynos4_vpll_save,
ARRAY_SIZE(exynos4_vpll_save));
@@ -268,14 +260,14 @@
do {
if (epll_wait) {
- pll_con = __raw_readl(S5P_EPLL_CON0);
- if (pll_con & (1 << S5P_EPLLCON0_LOCKED_SHIFT))
+ pll_con = __raw_readl(EXYNOS4_EPLL_CON0);
+ if (pll_con & (1 << EXYNOS4_EPLLCON0_LOCKED_SHIFT))
epll_wait = 0;
}
if (vpll_wait) {
- pll_con = __raw_readl(S5P_VPLL_CON0);
- if (pll_con & (1 << S5P_VPLLCON0_LOCKED_SHIFT))
+ pll_con = __raw_readl(EXYNOS4_VPLL_CON0);
+ if (pll_con & (1 << EXYNOS4_VPLLCON0_LOCKED_SHIFT))
vpll_wait = 0;
}
} while (epll_wait || vpll_wait);
@@ -388,13 +380,6 @@
scu_enable(S5P_VA_SCU);
#endif
-#ifdef CONFIG_CACHE_L2X0
- s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
- outer_inv_all();
- /* enable L2X0*/
- writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL);
-#endif
-
early_wakeup:
return;
}
diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c
index d395bd1..b90d94c 100644
--- a/arch/arm/mach-exynos/setup-i2c0.c
+++ b/arch/arm/mach-exynos/setup-i2c0.c
@@ -1,7 +1,5 @@
/*
- * linux/arch/arm/mach-exynos4/setup-i2c0.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2009-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* I2C0 GPIO configuration.
@@ -18,9 +16,14 @@
#include <linux/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
+#include <plat/cpu.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
+ if (soc_is_exynos5250())
+ /* will be implemented with gpio function */
+ return;
+
s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/mach-footbridge/include/mach/entry-macro.S b/arch/arm/mach-footbridge/include/mach/entry-macro.S
index d3847be..dabbd5c 100644
--- a/arch/arm/mach-footbridge/include/mach/entry-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/entry-macro.S
@@ -14,9 +14,6 @@
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
mov \base, #dc21285_high
.if dc21285_low
@@ -24,9 +21,6 @@
.endif
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #0x180] @ get interrupts
diff --git a/arch/arm/mach-footbridge/include/mach/system.h b/arch/arm/mach-footbridge/include/mach/system.h
deleted file mode 100644
index a174a58..0000000
--- a/arch/arm/mach-footbridge/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-footbridge/include/mach/system.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-gemini/Makefile b/arch/arm/mach-gemini/Makefile
index c5b24b9..7355c0b 100644
--- a/arch/arm/mach-gemini/Makefile
+++ b/arch/arm/mach-gemini/Makefile
@@ -4,7 +4,7 @@
# Object file lists.
-obj-y := irq.o mm.o time.o devices.o gpio.o
+obj-y := irq.o mm.o time.o devices.o gpio.o idle.o
# Board-specific support
obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
diff --git a/arch/arm/mach-gemini/idle.c b/arch/arm/mach-gemini/idle.c
new file mode 100644
index 0000000..92bbd6b
--- /dev/null
+++ b/arch/arm/mach-gemini/idle.c
@@ -0,0 +1,29 @@
+/*
+ * arch/arm/mach-gemini/idle.c
+ */
+
+#include <linux/init.h>
+#include <asm/system.h>
+#include <asm/proc-fns.h>
+
+static void gemini_idle(void)
+{
+ /*
+ * Because of broken hardware we have to enable interrupts or the CPU
+ * will never wakeup... Acctualy it is not very good to enable
+ * interrupts first since scheduler can miss a tick, but there is
+ * no other way around this. Platforms that needs it for power saving
+ * should call enable_hlt() in init code, since by default it is
+ * disabled.
+ */
+ local_irq_enable();
+ cpu_do_idle();
+}
+
+static int __init gemini_idle_init(void)
+{
+ arm_pm_idle = gemini_idle;
+ return 0;
+}
+
+arch_initcall(gemini_idle_init);
diff --git a/arch/arm/mach-gemini/include/mach/entry-macro.S b/arch/arm/mach-gemini/include/mach/entry-macro.S
index 1624f91..f044e43 100644
--- a/arch/arm/mach-gemini/include/mach/entry-macro.S
+++ b/arch/arm/mach-gemini/include/mach/entry-macro.S
@@ -12,15 +12,9 @@
#define IRQ_STATUS 0x14
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =IO_ADDRESS(GEMINI_INTERRUPT_BASE + IRQ_STATUS)
ldr \irqnr, [\irqstat]
diff --git a/arch/arm/mach-gemini/include/mach/system.h b/arch/arm/mach-gemini/include/mach/system.h
index 4d9c1f8..a33b5a1 100644
--- a/arch/arm/mach-gemini/include/mach/system.h
+++ b/arch/arm/mach-gemini/include/mach/system.h
@@ -14,20 +14,6 @@
#include <mach/hardware.h>
#include <mach/global_reg.h>
-static inline void arch_idle(void)
-{
- /*
- * Because of broken hardware we have to enable interrupts or the CPU
- * will never wakeup... Acctualy it is not very good to enable
- * interrupts here since scheduler can miss a tick, but there is
- * no other way around this. Platforms that needs it for power saving
- * should call enable_hlt() in init code, since by default it is
- * disabled.
- */
- local_irq_enable();
- cpu_do_idle();
-}
-
static inline void arch_reset(char mode, const char *cmd)
{
__raw_writel(RESET_GLOBAL | RESET_CPU1,
diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c
index 9485a8f..ca70e5f 100644
--- a/arch/arm/mach-gemini/irq.c
+++ b/arch/arm/mach-gemini/irq.c
@@ -73,8 +73,8 @@
unsigned int i, mode = 0, level = 0;
/*
- * Disable arch_idle() by default since it is buggy
- * For more info see arch/arm/mach-gemini/include/mach/system.h
+ * Disable the idle handler by default since it is buggy
+ * For more info see arch/arm/mach-gemini/idle.c
*/
disable_hlt();
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index f8a2f6b..e756d1a 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -247,3 +247,21 @@
{
CPU_REG (PMU_BASE, PMU_STAT) |= PMU_WARMRESET;
}
+
+static void h720x__idle(void)
+{
+ CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
+ nop();
+ nop();
+ CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
+ nop();
+ nop();
+}
+
+static int __init h720x_idle_init(void)
+{
+ arm_pm_idle = h720x__idle;
+ return 0;
+}
+
+arch_initcall(h720x_idle_init);
diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S
index c3948e5..75267fa 100644
--- a/arch/arm/mach-h720x/include/mach/entry-macro.S
+++ b/arch/arm/mach-h720x/include/mach/entry-macro.S
@@ -8,15 +8,9 @@
* warranty of any kind, whether express or implied.
*/
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
#if defined (CONFIG_CPU_H7201) || defined (CONFIG_CPU_H7202)
@ we could use the id register on H7202, but this is not
diff --git a/arch/arm/mach-h720x/include/mach/system.h b/arch/arm/mach-h720x/include/mach/system.h
deleted file mode 100644
index 16ac46e..0000000
--- a/arch/arm/mach-h720x/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/system.h
- *
- * Copyright (C) 2001-2002 Jungjun Kim, Hynix Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- * arch/arm/mach-h720x/include/mach/system.h
- *
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-
-static void arch_idle(void)
-{
- CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE;
- nop();
- nop();
- CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN;
- nop();
- nop();
-}
-
-#endif
diff --git a/arch/arm/mach-highbank/include/mach/entry-macro.S b/arch/arm/mach-highbank/include/mach/entry-macro.S
deleted file mode 100644
index a14f9e6..0000000
--- a/arch/arm/mach-highbank/include/mach/entry-macro.S
+++ /dev/null
@@ -1,5 +0,0 @@
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 31807d2..8404ee7 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -34,31 +34,29 @@
{
unsigned long reg = 0;
- if (!need_resched())
- __asm__ __volatile__(
- /* disable I and D cache */
- "mrc p15, 0, %0, c1, c0, 0\n"
- "bic %0, %0, #0x00001000\n"
- "bic %0, %0, #0x00000004\n"
- "mcr p15, 0, %0, c1, c0, 0\n"
- /* invalidate I cache */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c5, 0\n"
- /* clear and invalidate D cache */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c14, 0\n"
- /* WFI */
- "mov %0, #0\n"
- "mcr p15, 0, %0, c7, c0, 4\n"
- "nop\n" "nop\n" "nop\n" "nop\n"
- "nop\n" "nop\n" "nop\n"
- /* enable I and D cache */
- "mrc p15, 0, %0, c1, c0, 0\n"
- "orr %0, %0, #0x00001000\n"
- "orr %0, %0, #0x00000004\n"
- "mcr p15, 0, %0, c1, c0, 0\n"
- : "=r" (reg));
- local_irq_enable();
+ __asm__ __volatile__(
+ /* disable I and D cache */
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ "bic %0, %0, #0x00001000\n"
+ "bic %0, %0, #0x00000004\n"
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ /* invalidate I cache */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c5, 0\n"
+ /* clear and invalidate D cache */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c14, 0\n"
+ /* WFI */
+ "mov %0, #0\n"
+ "mcr p15, 0, %0, c7, c0, 4\n"
+ "nop\n" "nop\n" "nop\n" "nop\n"
+ "nop\n" "nop\n" "nop\n"
+ /* enable I and D cache */
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ "orr %0, %0, #0x00001000\n"
+ "orr %0, %0, #0x00000004\n"
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ : "=r" (reg));
}
static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
@@ -134,8 +132,8 @@
{
mxc_set_cpu_type(MXC_CPU_MX31);
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
- pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
+ arm_pm_idle = imx3_idle;
}
void __init mx31_init_irq(void)
@@ -197,7 +195,7 @@
mxc_set_cpu_type(MXC_CPU_MX35);
mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
- pm_idle = imx3_idle;
+ arm_pm_idle = imx3_idle;
imx_ioremap = imx3_ioremap;
}
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index bc17dfe..49549a7 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -26,23 +26,17 @@
static void imx5_idle(void)
{
- if (!need_resched()) {
- /* gpc clock is needed for SRPG */
- if (gpc_dvfs_clk == NULL) {
- gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
- if (IS_ERR(gpc_dvfs_clk))
- goto err0;
- }
- clk_enable(gpc_dvfs_clk);
- mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
- if (tzic_enable_wake())
- goto err1;
- cpu_do_idle();
-err1:
- clk_disable(gpc_dvfs_clk);
+ /* gpc clock is needed for SRPG */
+ if (gpc_dvfs_clk == NULL) {
+ gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+ if (IS_ERR(gpc_dvfs_clk))
+ return;
}
-err0:
- local_irq_enable();
+ clk_enable(gpc_dvfs_clk);
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ if (tzic_enable_wake() != 0)
+ cpu_do_idle();
+ clk_disable(gpc_dvfs_clk);
}
/*
@@ -108,7 +102,7 @@
mxc_set_cpu_type(MXC_CPU_MX51);
mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
- pm_idle = imx5_idle;
+ arm_pm_idle = imx5_idle;
}
void __init imx53_init_early(void)
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index e455d2f..6fcffa7 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -10,7 +10,6 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
-#include <mach/system.h>
#include <mach/hardware.h>
static int mx27_suspend_enter(suspend_state_t state)
@@ -23,7 +22,7 @@
cscr &= 0xFFFFFFFC;
__raw_writel(cscr, MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR));
/* Executes WFI */
- arch_idle();
+ cpu_do_idle();
break;
default:
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 019f0ab..15b87f2 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -35,67 +35,23 @@
static struct amba_pl010_data integrator_uart_data;
-static struct amba_device rtc_device = {
- .dev = {
- .init_name = "mb:15",
- },
- .res = {
- .start = INTEGRATOR_RTC_BASE,
- .end = INTEGRATOR_RTC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_RTCINT, NO_IRQ },
-};
+#define INTEGRATOR_RTC_IRQ { IRQ_RTCINT }
+#define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 }
+#define INTEGRATOR_UART1_IRQ { IRQ_UARTINT1 }
+#define KMI0_IRQ { IRQ_KMIINT0 }
+#define KMI1_IRQ { IRQ_KMIINT1 }
-static struct amba_device uart0_device = {
- .dev = {
- .init_name = "mb:16",
- .platform_data = &integrator_uart_data,
- },
- .res = {
- .start = INTEGRATOR_UART0_BASE,
- .end = INTEGRATOR_UART0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_UARTINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(rtc, "mb:15", 0,
+ INTEGRATOR_RTC_BASE, INTEGRATOR_RTC_IRQ, NULL);
-static struct amba_device uart1_device = {
- .dev = {
- .init_name = "mb:17",
- .platform_data = &integrator_uart_data,
- },
- .res = {
- .start = INTEGRATOR_UART1_BASE,
- .end = INTEGRATOR_UART1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_UARTINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart0, "mb:16", 0,
+ INTEGRATOR_UART0_BASE, INTEGRATOR_UART0_IRQ, &integrator_uart_data);
-static struct amba_device kmi0_device = {
- .dev = {
- .init_name = "mb:18",
- },
- .res = {
- .start = KMI0_BASE,
- .end = KMI0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_KMIINT0, NO_IRQ },
-};
+static AMBA_APB_DEVICE(uart1, "mb:17", 0,
+ INTEGRATOR_UART1_BASE, INTEGRATOR_UART1_IRQ, &integrator_uart_data);
-static struct amba_device kmi1_device = {
- .dev = {
- .init_name = "mb:19",
- },
- .res = {
- .start = KMI1_BASE,
- .end = KMI1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_KMIINT1, NO_IRQ },
-};
+static AMBA_APB_DEVICE(kmi0, "mb:18", 0, KMI0_BASE, KMI0_IRQ, NULL);
+static AMBA_APB_DEVICE(kmi1, "mb:19", 0, KMI1_BASE, KMI1_IRQ, NULL);
static struct amba_device *amba_devs[] __initdata = {
&rtc_device,
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 8cbb75a..3e538da 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -401,24 +401,21 @@
pc_base = dev->resource.start + idev->offset;
- d = kzalloc(sizeof(struct amba_device), GFP_KERNEL);
+ d = amba_device_alloc(NULL, pc_base, SZ_4K);
if (!d)
continue;
dev_set_name(&d->dev, "lm%x:%5.5lx", dev->id, idev->offset >> 12);
d->dev.parent = &dev->dev;
- d->res.start = dev->resource.start + idev->offset;
- d->res.end = d->res.start + SZ_4K - 1;
- d->res.flags = IORESOURCE_MEM;
d->irq[0] = dev->irq;
d->irq[1] = dev->irq;
d->periphid = idev->id;
d->dev.platform_data = idev->platform_data;
- ret = amba_device_register(d, &dev->resource);
+ ret = amba_device_add(d, &dev->resource);
if (ret) {
dev_err(&d->dev, "unable to register device: %d\n", ret);
- kfree(d);
+ amba_device_put(d);
}
}
diff --git a/arch/arm/mach-integrator/include/mach/entry-macro.S b/arch/arm/mach-integrator/include/mach/entry-macro.S
index 3d029c9..5cc7b85 100644
--- a/arch/arm/mach-integrator/include/mach/entry-macro.S
+++ b/arch/arm/mach-integrator/include/mach/entry-macro.S
@@ -11,15 +11,9 @@
#include <mach/platform.h>
#include <mach/irqs.h>
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
/* FIXME: should not be using soo many LDRs here */
ldr \base, =IO_ADDRESS(INTEGRATOR_IC_BASE)
diff --git a/arch/arm/mach-integrator/include/mach/system.h b/arch/arm/mach-integrator/include/mach/system.h
deleted file mode 100644
index 901514e..0000000
--- a/arch/arm/mach-integrator/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-integrator/include/mach/system.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a8b6aa6..be9ead4 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -347,32 +347,14 @@
.gpio_cd = -1,
};
-static struct amba_device mmc_device = {
- .dev = {
- .init_name = "mb:1c",
- .platform_data = &mmc_data,
- },
- .res = {
- .start = INTEGRATOR_CP_MMC_BASE,
- .end = INTEGRATOR_CP_MMC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 },
- .periphid = 0,
-};
+#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
+#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT }
-static struct amba_device aaci_device = {
- .dev = {
- .init_name = "mb:1d",
- },
- .res = {
- .start = INTEGRATOR_CP_AACI_BASE,
- .end = INTEGRATOR_CP_AACI_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_CP_AACIINT, NO_IRQ },
- .periphid = 0,
-};
+static AMBA_APB_DEVICE(mmc, "mb:1c", 0, INTEGRATOR_CP_MMC_BASE,
+ INTEGRATOR_CP_MMC_IRQS, &mmc_data);
+
+static AMBA_APB_DEVICE(aaci, "mb:1d", 0, INTEGRATOR_CP_AACI_BASE,
+ INTEGRATOR_CP_AACI_IRQS, NULL);
/*
@@ -425,21 +407,8 @@
.remove = versatile_clcd_remove_dma,
};
-static struct amba_device clcd_device = {
- .dev = {
- .init_name = "mb:c0",
- .coherent_dma_mask = ~0,
- .platform_data = &clcd_data,
- },
- .res = {
- .start = INTCP_PA_CLCD_BASE,
- .end = INTCP_PA_CLCD_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .dma_mask = ~0,
- .irq = { IRQ_CP_CLCDCINT, NO_IRQ },
- .periphid = 0,
-};
+static AMBA_AHB_DEVICE(clcd, "mb:c0", 0, INTCP_PA_CLCD_BASE,
+ { IRQ_CP_CLCDCINT }, &clcd_data);
static struct amba_device *amba_devs[] __initdata = {
&mmc_device,
diff --git a/arch/arm/mach-iop13xx/include/mach/entry-macro.S b/arch/arm/mach-iop13xx/include/mach/entry-macro.S
index a624a78..1a2d603 100644
--- a/arch/arm/mach-iop13xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/entry-macro.S
@@ -16,9 +16,6 @@
* Place - Suite 330, Boston, MA 02111-1307 USA.
*
*/
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c15, c1, 0
orr \tmp, \tmp, #(1 << 6)
diff --git a/arch/arm/mach-iop13xx/include/mach/system.h b/arch/arm/mach-iop13xx/include/mach/system.h
deleted file mode 100644
index 1f31ed3..0000000
--- a/arch/arm/mach-iop13xx/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop13xx/include/mach/system.h
- *
- * Copyright (C) 2004 Intel Corp.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-iop32x/include/mach/entry-macro.S b/arch/arm/mach-iop32x/include/mach/entry-macro.S
index b02fb56..ea13ae0 100644
--- a/arch/arm/mach-iop32x/include/mach/entry-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/entry-macro.S
@@ -9,9 +9,6 @@
*/
#include <mach/iop32x.h>
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c15, c1, 0
orr \tmp, \tmp, #(1 << 6)
diff --git a/arch/arm/mach-iop32x/include/mach/system.h b/arch/arm/mach-iop32x/include/mach/system.h
deleted file mode 100644
index 4a88727..0000000
--- a/arch/arm/mach-iop32x/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-iop33x/include/mach/entry-macro.S b/arch/arm/mach-iop33x/include/mach/entry-macro.S
index 4e1f728..0a398fe 100644
--- a/arch/arm/mach-iop33x/include/mach/entry-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/entry-macro.S
@@ -9,9 +9,6 @@
*/
#include <mach/iop33x.h>
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c15, c1, 0
orr \tmp, \tmp, #(1 << 6)
diff --git a/arch/arm/mach-iop33x/include/mach/system.h b/arch/arm/mach-iop33x/include/mach/system.h
deleted file mode 100644
index 4f98e76..0000000
--- a/arch/arm/mach-iop33x/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/system.h
- *
- * Copyright (C) 2001 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-ixp2000/include/mach/entry-macro.S b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
index 5850ffc..c4444df 100644
--- a/arch/arm/mach-ixp2000/include/mach/entry-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/entry-macro.S
@@ -9,15 +9,9 @@
*/
#include <mach/irqs.h>
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqnr, #0x0 @clear out irqnr as default
diff --git a/arch/arm/mach-ixp2000/include/mach/system.h b/arch/arm/mach-ixp2000/include/mach/system.h
deleted file mode 100644
index a7fb08b..0000000
--- a/arch/arm/mach-ixp2000/include/mach/system.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * arch/arm/mach-ixp2000/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corp.
- * Copyricht (C) 2003-2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c
index 0923bb9..7c1495e 100644
--- a/arch/arm/mach-ixp23xx/core.c
+++ b/arch/arm/mach-ixp23xx/core.c
@@ -441,6 +441,9 @@
void __init ixp23xx_sys_init(void)
{
+ /* by default, the idle code is disabled */
+ disable_hlt();
+
*IXP23XX_EXP_UNIT_FUSE |= 0xf;
platform_add_devices(ixp23xx_devices, ARRAY_SIZE(ixp23xx_devices));
}
diff --git a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
index 3f5338a..3fd2cb9 100644
--- a/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/entry-macro.S
@@ -2,15 +2,9 @@
* arch/arm/mach-ixp23xx/include/mach/entry-macro.S
*/
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, =(IXP23XX_INTC_VIRT + IXP23XX_INTR_IRQ_ENC_ST_OFFSET)
ldr \irqnr, [\irqnr] @ get interrupt number
diff --git a/arch/arm/mach-ixp23xx/include/mach/system.h b/arch/arm/mach-ixp23xx/include/mach/system.h
deleted file mode 100644
index 277dda7..0000000
--- a/arch/arm/mach-ixp23xx/include/mach/system.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-ixp23xx/include/mach/system.h
- *
- * Copyright (C) 2003 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
-#if 0
- if (!hlt_counter)
- cpu_do_idle();
-#endif
-}
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 3841ab4..a6329a0 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -236,6 +236,12 @@
{
int i = 0;
+ /*
+ * ixp4xx does not implement the XScale PWRMODE register
+ * so it must not call cpu_do_idle().
+ */
+ disable_hlt();
+
/* Route all sources to IRQ instead of FIQ */
*IXP4XX_ICLR = 0x0;
diff --git a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
index f2e14e9..79adf83 100644
--- a/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/entry-macro.S
@@ -9,15 +9,9 @@
*/
#include <mach/hardware.h>
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, =(IXP4XX_INTC_BASE_VIRT+IXP4XX_ICIP_OFFSET)
ldr \irqstat, [\irqstat] @ get interrupts
diff --git a/arch/arm/mach-ixp4xx/include/mach/system.h b/arch/arm/mach-ixp4xx/include/mach/system.h
deleted file mode 100644
index 140a9be..0000000
--- a/arch/arm/mach-ixp4xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/system.h
- *
- * Copyright (C) 2002 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-static inline void arch_idle(void)
-{
- /* ixp4xx does not implement the XScale PWRMODE register,
- * so it must not call cpu_do_idle() here.
- */
-#if 0
- cpu_do_idle();
-#endif
-}
diff --git a/arch/arm/mach-kirkwood/include/mach/entry-macro.S b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
index 8939d36..82db29f 100644
--- a/arch/arm/mach-kirkwood/include/mach/entry-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/entry-macro.S
@@ -10,12 +10,6 @@
#include <mach/bridge-regs.h>
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm
diff --git a/arch/arm/mach-kirkwood/include/mach/system.h b/arch/arm/mach-kirkwood/include/mach/system.h
deleted file mode 100644
index 5fddde0..0000000
--- a/arch/arm/mach-kirkwood/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-ks8695/include/mach/entry-macro.S b/arch/arm/mach-ks8695/include/mach/entry-macro.S
index b4fe0c1..8315b34 100644
--- a/arch/arm/mach-ks8695/include/mach/entry-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/entry-macro.S
@@ -14,16 +14,10 @@
#include <mach/hardware.h>
#include <mach/regs-irq.h>
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
ldr \base, =KS8695_IRQ_VA @ Base address of interrupt controller
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #KS8695_INTMS] @ Mask Status register
diff --git a/arch/arm/mach-ks8695/include/mach/system.h b/arch/arm/mach-ks8695/include/mach/system.h
deleted file mode 100644
index 59fe992..0000000
--- a/arch/arm/mach-ks8695/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-s3c2410/include/mach/system.h
- *
- * Copyright (C) 2006 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * KS8695 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks,
- */
- cpu_do_idle();
-
-}
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
index b725f6c..24ca11b 100644
--- a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
+++ b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S
@@ -21,16 +21,10 @@
#define LPC32XX_INTC_MASKED_STATUS_OFS 0x8
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
ldr \base, =IO_ADDRESS(LPC32XX_MIC_BASE)
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
/*
* Return IRQ number in irqnr. Also return processor Z flag status in CPSR
* as set if an interrupt is pending.
diff --git a/arch/arm/mach-lpc32xx/include/mach/system.h b/arch/arm/mach-lpc32xx/include/mach/system.h
deleted file mode 100644
index bf176c9..0000000
--- a/arch/arm/mach-lpc32xx/include/mach/system.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/system.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index bfee5b4..5d51c10 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -149,20 +149,8 @@
.remove = lpc32xx_clcd_remove,
};
-static struct amba_device lpc32xx_clcd_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "dev:clcd",
- .platform_data = &lpc32xx_clcd_data,
- },
- .res = {
- .start = LPC32XX_LCD_BASE,
- .end = (LPC32XX_LCD_BASE + SZ_4K - 1),
- .flags = IORESOURCE_MEM,
- },
- .dma_mask = ~0,
- .irq = {IRQ_LPC32XX_LCD, NO_IRQ},
-};
+static AMBA_AHB_DEVICE(lpc32xx_clcd, "dev:clcd", 0,
+ LPC32XX_LCD_BASE, { IRQ_LPC32XX_LCD }, &lpc32xx_clcd_data);
/*
* AMBA SSP (SPI)
@@ -191,20 +179,8 @@
.enable_dma = 0,
};
-static struct amba_device lpc32xx_ssp0_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "dev:ssp0",
- .platform_data = &lpc32xx_ssp0_data,
- },
- .res = {
- .start = LPC32XX_SSP0_BASE,
- .end = (LPC32XX_SSP0_BASE + SZ_4K - 1),
- .flags = IORESOURCE_MEM,
- },
- .dma_mask = ~0,
- .irq = {IRQ_LPC32XX_SSP0, NO_IRQ},
-};
+static AMBA_APB_DEVICE(lpc32xx_ssp0, "dev:ssp0", 0,
+ LPC32XX_SSP0_BASE, { IRQ_LPC32XX_SSP0 }, &lpc32xx_ssp0_data);
/* AT25 driver registration */
static int __init phy3250_spi_board_register(void)
diff --git a/arch/arm/mach-mmp/include/mach/entry-macro.S b/arch/arm/mach-mmp/include/mach/entry-macro.S
index c42d9d4..9cff9e7 100644
--- a/arch/arm/mach-mmp/include/mach/entry-macro.S
+++ b/arch/arm/mach-mmp/include/mach/entry-macro.S
@@ -8,12 +8,6 @@
#include <mach/regs-icu.h>
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_preamble, base, tmp
mrc p15, 0, \tmp, c0, c0, 0 @ CPUID
and \tmp, \tmp, #0xff00
diff --git a/arch/arm/mach-mmp/include/mach/system.h b/arch/arm/mach-mmp/include/mach/system.h
deleted file mode 100644
index 1d001ea..0000000
--- a/arch/arm/mach-mmp/include/mach/system.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_SYSTEM_H
-#define __ASM_MACH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-#endif /* __ASM_MACH_SYSTEM_H */
diff --git a/arch/arm/mach-msm/idle.S b/arch/arm/mach-msm/idle.S
deleted file mode 100644
index 6a94f05..0000000
--- a/arch/arm/mach-msm/idle.S
+++ /dev/null
@@ -1,36 +0,0 @@
-/* arch/arm/mach-msm/include/mach/idle.S
- *
- * Idle processing for MSM7K - work around bugs with SWFI.
- *
- * Copyright (c) 2007 QUALCOMM Incorporated.
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-
-ENTRY(arch_idle)
-#ifdef CONFIG_MSM7X00A_IDLE
- mrc p15, 0, r1, c1, c0, 0 /* read current CR */
- bic r0, r1, #(1 << 2) /* clear dcache bit */
- bic r0, r0, #(1 << 12) /* clear icache bit */
- mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */
-
- mov r0, #0 /* prepare wfi value */
- mcr p15, 0, r0, c7, c10, 0 /* flush the cache */
- mcr p15, 0, r0, c7, c10, 4 /* memory barrier */
- mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */
-
- mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */
-#endif
- mov pc, lr
diff --git a/arch/arm/mach-msm/idle.c b/arch/arm/mach-msm/idle.c
new file mode 100644
index 0000000..0c9e13c
--- /dev/null
+++ b/arch/arm/mach-msm/idle.c
@@ -0,0 +1,49 @@
+/* arch/arm/mach-msm/idle.c
+ *
+ * Idle processing for MSM7K - work around bugs with SWFI.
+ *
+ * Copyright (c) 2007 QUALCOMM Incorporated.
+ * Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <asm/system.h>
+
+static void msm_idle(void)
+{
+#ifdef CONFIG_MSM7X00A_IDLE
+ asm volatile (
+
+ "mrc p15, 0, r1, c1, c0, 0 /* read current CR */ \n\t"
+ "bic r0, r1, #(1 << 2) /* clear dcache bit */ \n\t"
+ "bic r0, r0, #(1 << 12) /* clear icache bit */ \n\t"
+ "mcr p15, 0, r0, c1, c0, 0 /* disable d/i cache */ \n\t"
+
+ "mov r0, #0 /* prepare wfi value */ \n\t"
+ "mcr p15, 0, r0, c7, c10, 0 /* flush the cache */ \n\t"
+ "mcr p15, 0, r0, c7, c10, 4 /* memory barrier */ \n\t"
+ "mcr p15, 0, r0, c7, c0, 4 /* wait for interrupt */ \n\t"
+
+ "mcr p15, 0, r1, c1, c0, 0 /* restore d/i cache */ \n\t"
+
+ : : : "r0","r1" );
+#endif
+}
+
+static int __init msm_idle_init(void)
+{
+ arm_pm_idle = msm_idle;
+ return 0;
+}
+
+arch_initcall(msm_idle_init);
diff --git a/arch/arm/mach-msm/include/mach/entry-macro.S b/arch/arm/mach-msm/include/mach/entry-macro.S
index 41f7003..f2ae9087 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro.S
@@ -16,12 +16,6 @@
*
*/
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
#if !defined(CONFIG_ARM_GIC)
#include <mach/msm_iomap.h>
diff --git a/arch/arm/mach-msm/include/mach/system.h b/arch/arm/mach-msm/include/mach/system.h
index 311db2b..f5fb2ec 100644
--- a/arch/arm/mach-msm/include/mach/system.h
+++ b/arch/arm/mach-msm/include/mach/system.h
@@ -12,7 +12,6 @@
* GNU General Public License for more details.
*
*/
-void arch_idle(void);
/* low level hardware reset hook -- for example, hitting the
* PSHOLD line on the PMIC to hard reset the system
diff --git a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
index 66ae2d2..6b1f088 100644
--- a/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/entry-macro.S
@@ -10,12 +10,6 @@
#include <mach/bridge-regs.h>
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm
diff --git a/arch/arm/mach-mv78xx0/include/mach/system.h b/arch/arm/mach-mv78xx0/include/mach/system.h
deleted file mode 100644
index 8c3a538..0000000
--- a/arch/arm/mach-mv78xx0/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/system.h
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c
index fe3e847..01faffe 100644
--- a/arch/arm/mach-mxs/devices.c
+++ b/arch/arm/mach-mxs/devices.c
@@ -77,16 +77,18 @@
int __init mxs_add_amba_device(const struct amba_device *dev)
{
- struct amba_device *adev = kmalloc(sizeof(*adev), GFP_KERNEL);
+ struct amba_device *adev = amba_device_alloc(dev->dev.init_name,
+ dev->res.start, resource_size(&dev->res));
if (!adev) {
pr_err("%s: failed to allocate memory", __func__);
return -ENOMEM;
}
- *adev = *dev;
+ adev->irq[0] = dev->irq[0];
+ adev->irq[1] = dev->irq[1];
- return amba_device_register(adev, &iomem_resource);
+ return amba_device_add(adev, &iomem_resource);
}
struct device mxs_apbh_bus = {
diff --git a/arch/arm/mach-mxs/devices/amba-duart.c b/arch/arm/mach-mxs/devices/amba-duart.c
index a559db0..a5479f7 100644
--- a/arch/arm/mach-mxs/devices/amba-duart.c
+++ b/arch/arm/mach-mxs/devices/amba-duart.c
@@ -23,7 +23,7 @@
.end = (soc ## _DUART_BASE_ADDR) + SZ_8K - 1, \
.flags = IORESOURCE_MEM, \
}, \
- .irq = {soc ## _INT_DUART, NO_IRQ}, \
+ .irq = {soc ## _INT_DUART}, \
}
#ifdef CONFIG_SOC_IMX23
diff --git a/arch/arm/mach-mxs/include/mach/entry-macro.S b/arch/arm/mach-mxs/include/mach/entry-macro.S
index 9f0da12..0c14259 100644
--- a/arch/arm/mach-mxs/include/mach/entry-macro.S
+++ b/arch/arm/mach-mxs/include/mach/entry-macro.S
@@ -23,9 +23,6 @@
#define MXS_ICOLL_VBASE MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR)
#define HW_ICOLL_STAT_OFFSET 0x70
- .macro disable_fiq
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base, #HW_ICOLL_STAT_OFFSET]
cmp \irqnr, #0x7F
@@ -36,6 +33,3 @@
.macro get_irqnr_preamble, base, tmp
ldr \base, =MXS_ICOLL_VBASE
.endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-mxs/include/mach/system.h b/arch/arm/mach-mxs/include/mach/system.h
deleted file mode 100644
index e7ad1bb..0000000
--- a/arch/arm/mach-mxs/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MXS_SYSTEM_H__
-#define __MACH_MXS_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif /* __MACH_MXS_SYSTEM_H__ */
diff --git a/arch/arm/mach-mxs/pm.c b/arch/arm/mach-mxs/pm.c
index fb042da..a9b4bbc 100644
--- a/arch/arm/mach-mxs/pm.c
+++ b/arch/arm/mach-mxs/pm.c
@@ -15,13 +15,12 @@
#include <linux/kernel.h>
#include <linux/suspend.h>
#include <linux/io.h>
-#include <mach/system.h>
static int mxs_suspend_enter(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_MEM:
- arch_idle();
+ cpu_do_idle();
break;
default:
diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c
index b991323..2cdf6ef 100644
--- a/arch/arm/mach-netx/fb.c
+++ b/arch/arm/mach-netx/fb.c
@@ -92,18 +92,7 @@
{
}
-static struct amba_device fb_device = {
- .dev = {
- .init_name = "fb",
- .coherent_dma_mask = ~0,
- },
- .res = {
- .start = 0x00104000,
- .end = 0x00104fff,
- .flags = IORESOURCE_MEM,
- },
- .irq = { NETX_IRQ_LCD, NO_IRQ },
-};
+static AMBA_AHB_DEVICE(fb, "fb", 0, 0x00104000, { NETX_IRQ_LCD }, NULL);
int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel)
{
diff --git a/arch/arm/mach-netx/include/mach/entry-macro.S b/arch/arm/mach-netx/include/mach/entry-macro.S
deleted file mode 100644
index 6e9f1cb..0000000
--- a/arch/arm/mach-netx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Hilscher netX based platforms
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-netx/include/mach/system.h b/arch/arm/mach-netx/include/mach/system.h
deleted file mode 100644
index b38fa36..0000000
--- a/arch/arm/mach-netx/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/system.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
-
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 7c878bf..f6f74ad 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -185,20 +185,11 @@
#endif
}
-#define __MEM_4K_RESOURCE(x) \
- .res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+static AMBA_APB_DEVICE(uart0, "uart0", 0, NOMADIK_UART0_BASE,
+ { IRQ_UART0 }, NULL);
-static struct amba_device uart0_device = {
- .dev = { .init_name = "uart0" },
- __MEM_4K_RESOURCE(NOMADIK_UART0_BASE),
- .irq = {IRQ_UART0, NO_IRQ},
-};
-
-static struct amba_device uart1_device = {
- .dev = { .init_name = "uart1" },
- __MEM_4K_RESOURCE(NOMADIK_UART1_BASE),
- .irq = {IRQ_UART1, NO_IRQ},
-};
+static AMBA_APB_DEVICE(uart1, "uart1", 0, NOMADIK_UART1_BASE,
+ { IRQ_UART1 }, NULL);
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 65df7b4..27f43a4 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -97,12 +97,7 @@
GPIO_DEVICE(3),
};
-static struct amba_device cpu8815_amba_rng = {
- .dev = {
- .init_name = "rng",
- },
- __MEM_4K_RESOURCE(NOMADIK_RNG_BASE),
-};
+static AMBA_APB_DEVICE(cpu8815_amba_rng, "rng", 0, NOMADIK_RNG_BASE, { }, NULL);
static struct platform_device *platform_devs[] __initdata = {
cpu8815_platform_gpio + 0,
@@ -112,7 +107,7 @@
};
static struct amba_device *amba_devs[] __initdata = {
- &cpu8815_amba_rng
+ &cpu8815_amba_rng_device
};
static int __init cpu8815_init(void)
diff --git a/arch/arm/mach-nomadik/include/mach/entry-macro.S b/arch/arm/mach-nomadik/include/mach/entry-macro.S
deleted file mode 100644
index 98ea1c1..0000000
--- a/arch/arm/mach-nomadik/include/mach/entry-macro.S
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * Low-level IRQ helper macros for Nomadik platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-nomadik/include/mach/system.h b/arch/arm/mach-nomadik/include/mach/system.h
deleted file mode 100644
index 25e198b..0000000
--- a/arch/arm/mach-nomadik/include/mach/system.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * mach-nomadik/include/mach/system.h
- *
- * Copyright (C) 2008 STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S
index bfb4fb1..83c0250 100644
--- a/arch/arm/mach-omap1/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@@ -14,15 +14,9 @@
#include <mach/irqs.h>
#include <asm/hardware/gic.h>
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
ldr \irqnr, [\base, #IRQ_ITR_REG_OFFSET]
diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h
deleted file mode 100644
index a6c1b3a..0000000
--- a/arch/arm/mach-omap1/include/mach/system.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap1/include/mach/system.h
- */
-
-#include <plat/system.h>
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 89ea20c..0c2c366 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -42,9 +42,9 @@
#include <linux/sysfs.h>
#include <linux/module.h>
#include <linux/io.h>
+#include <linux/atomic.h>
#include <asm/irq.h>
-#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
@@ -108,13 +108,7 @@
__u32 use_idlect1 = arm_idlect1_mask;
int do_sleep = 0;
- local_irq_disable();
local_fiq_disable();
- if (need_resched()) {
- local_fiq_enable();
- local_irq_enable();
- return;
- }
#if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
#warning Enable 32kHz OS timer in order to allow sleep states in idle
@@ -157,14 +151,12 @@
omap_writel(saved_idlect1, ARM_IDLECT1);
local_fiq_enable();
- local_irq_enable();
return;
}
omap_sram_suspend(omap_readl(ARM_IDLECT1),
omap_readl(ARM_IDLECT2));
local_fiq_enable();
- local_irq_enable();
}
/*
@@ -583,8 +575,6 @@
#endif /* DEBUG && CONFIG_PROC_FS */
-static void (*saved_idle)(void) = NULL;
-
/*
* omap_pm_prepare - Do preliminary suspend work.
*
@@ -592,8 +582,7 @@
static int omap_pm_prepare(void)
{
/* We cannot sleep in idle until we have resumed */
- saved_idle = pm_idle;
- pm_idle = NULL;
+ disable_hlt();
return 0;
}
@@ -630,7 +619,7 @@
static void omap_pm_finish(void)
{
- pm_idle = saved_idle;
+ enable_hlt();
}
@@ -687,7 +676,7 @@
return -ENODEV;
}
- pm_idle = omap1_pm_idle;
+ arm_pm_idle = omap1_pm_idle;
if (cpu_is_omap7xx())
setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
index 9c442e2..ce91aad 100644
--- a/arch/arm/mach-omap2/emu.c
+++ b/arch/arm/mach-omap2/emu.c
@@ -30,29 +30,8 @@
#define ETB_BASE (L4_EMU_34XX_PHYS + 0x1b000)
#define DAPCTL (L4_EMU_34XX_PHYS + 0x1d000)
-static struct amba_device omap3_etb_device = {
- .dev = {
- .init_name = "etb",
- },
- .res = {
- .start = ETB_BASE,
- .end = ETB_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .periphid = 0x000bb907,
-};
-
-static struct amba_device omap3_etm_device = {
- .dev = {
- .init_name = "etm",
- },
- .res = {
- .start = ETM_BASE,
- .end = ETM_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .periphid = 0x102bb921,
-};
+static AMBA_APB_DEVICE(omap3_etb, "etb", 0x000bb907, ETB_BASE, { }, NULL);
+static AMBA_APB_DEVICE(omap3_etm, "etm", 0x102bb921, ETM_BASE, { }, NULL);
static int __init emu_init(void)
{
@@ -66,4 +45,3 @@
}
subsys_initcall(emu_init);
-
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
deleted file mode 100644
index 56964a0..0000000
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for OMAP-based platforms
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h
deleted file mode 100644
index d488721..0000000
--- a/arch/arm/mach-omap2/include/mach/system.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/system.h
- */
-
-#include <plat/system.h>
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index 23de98d..a4eb5c2 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -226,7 +226,6 @@
static void omap2_pm_idle(void)
{
- local_irq_disable();
local_fiq_disable();
if (!omap2_can_sleep()) {
@@ -243,7 +242,6 @@
out:
local_fiq_enable();
- local_irq_enable();
}
#ifdef CONFIG_SUSPEND
@@ -462,7 +460,7 @@
}
suspend_set_ops(&omap_pm_ops);
- pm_idle = omap2_pm_idle;
+ arm_pm_idle = omap2_pm_idle;
return 0;
}
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index fc69875..b77df73 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -418,10 +418,9 @@
static void omap3_pm_idle(void)
{
- local_irq_disable();
local_fiq_disable();
- if (omap_irq_pending() || need_resched())
+ if (omap_irq_pending())
goto out;
trace_power_start(POWER_CSTATE, 1, smp_processor_id());
@@ -434,7 +433,6 @@
out:
local_fiq_enable();
- local_irq_enable();
}
#ifdef CONFIG_SUSPEND
@@ -848,7 +846,7 @@
suspend_set_ops(&omap_pm_ops);
#endif /* CONFIG_SUSPEND */
- pm_idle = omap3_pm_idle;
+ arm_pm_idle = omap3_pm_idle;
omap3_idle_init();
/*
diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c
index c264ef7..c840689 100644
--- a/arch/arm/mach-omap2/pm44xx.c
+++ b/arch/arm/mach-omap2/pm44xx.c
@@ -173,18 +173,16 @@
* omap_default_idle - OMAP4 default ilde routine.'
*
* Implements OMAP4 memory, IO ordering requirements which can't be addressed
- * with default arch_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
+ * with default cpu_do_idle() hook. Used by all CPUs with !CONFIG_CPUIDLE and
* by secondary CPU with CONFIG_CPUIDLE.
*/
static void omap_default_idle(void)
{
- local_irq_disable();
local_fiq_disable();
omap_do_wfi();
local_fiq_enable();
- local_irq_enable();
}
/**
@@ -255,8 +253,8 @@
suspend_set_ops(&omap_pm_ops);
#endif /* CONFIG_SUSPEND */
- /* Overwrite the default arch_idle() */
- pm_idle = omap_default_idle;
+ /* Overwrite the default cpu_do_idle() */
+ arm_pm_idle = omap_default_idle;
omap4_idle_init();
diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c
index 860118a..873b51d 100644
--- a/arch/arm/mach-omap2/prm_common.c
+++ b/arch/arm/mach-omap2/prm_common.c
@@ -24,7 +24,6 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
-#include <mach/system.h>
#include <plat/common.h>
#include <plat/prcm.h>
#include <plat/irqs.h>
diff --git a/arch/arm/mach-orion5x/include/mach/entry-macro.S b/arch/arm/mach-orion5x/include/mach/entry-macro.S
index d658992..79eb502 100644
--- a/arch/arm/mach-orion5x/include/mach/entry-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/entry-macro.S
@@ -10,12 +10,6 @@
#include <mach/bridge-regs.h>
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_preamble, base, tmp
ldr \base, =MAIN_IRQ_CAUSE
.endm
diff --git a/arch/arm/mach-orion5x/include/mach/system.h b/arch/arm/mach-orion5x/include/mach/system.h
deleted file mode 100644
index 825a265..0000000
--- a/arch/arm/mach-orion5x/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/system.h
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-picoxcell/include/mach/entry-macro.S b/arch/arm/mach-picoxcell/include/mach/entry-macro.S
deleted file mode 100644
index 9b505ac..0000000
--- a/arch/arm/mach-picoxcell/include/mach/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * entry-macro.S
- *
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * Low-level IRQ helper macros for picoXcell platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-picoxcell/include/mach/system.h b/arch/arm/mach-picoxcell/include/mach/system.h
deleted file mode 100644
index 1a5d8cb..0000000
--- a/arch/arm/mach-picoxcell/include/mach/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright (c) 2011 Picochip Ltd., Jamie Iles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching and wait for interrupt
- * tricks.
- */
- cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
index db7eeeb..77a5558 100644
--- a/arch/arm/mach-pnx4008/include/mach/entry-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/entry-macro.S
@@ -25,15 +25,9 @@
#define SIC1_BASE_INT 32
#define SIC2_BASE_INT 64
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
/* decode the MIC interrupt numbers */
ldr \base, =IO_ADDRESS(PNX4008_INTCTRLMIC_BASE)
diff --git a/arch/arm/mach-pnx4008/include/mach/system.h b/arch/arm/mach-pnx4008/include/mach/system.h
deleted file mode 100644
index 60cfe71..0000000
--- a/arch/arm/mach-pnx4008/include/mach/system.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/system.h
- *
- * Copyright (C) 2003 Philips Semiconductors
- * Copyright (C) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-prima2/include/mach/entry-macro.S b/arch/arm/mach-prima2/include/mach/entry-macro.S
index 1c8a50f..86434e7 100644
--- a/arch/arm/mach-prima2/include/mach/entry-macro.S
+++ b/arch/arm/mach-prima2/include/mach/entry-macro.S
@@ -20,10 +20,3 @@
cmp \irqnr, #0x40 @ the irq num can't be larger than 0x3f
movges \irqnr, #0
.endm
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h
deleted file mode 100644
index 2c7d2a9..0000000
--- a/arch/arm/mach-prima2/include/mach/system.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/system.h
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __MACH_SYSTEM_H__
-#define __MACH_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
deleted file mode 100644
index 260c0c1..0000000
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for PXA-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
deleted file mode 100644
index c5afacd..0000000
--- a/arch/arm/mach-pxa/include/mach/system.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/system.h
- *
- * Author: Nicolas Pitre
- * Created: Jun 15, 2001
- * Copyright: MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 735b57a..f8f2c0a 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -28,21 +28,11 @@
#include <asm/setup.h>
#include <asm/leds.h>
-#define AMBA_DEVICE(name,busid,base,plat) \
-static struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0, \
- .init_name = busid, \
- .platform_data = plat, \
- }, \
- .res = { \
- .start = REALVIEW_##base##_BASE, \
- .end = (REALVIEW_##base##_BASE) + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, \
- .dma_mask = ~0, \
- .irq = base##_IRQ, \
-}
+#define APB_DEVICE(name, busid, base, plat) \
+static AMBA_APB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
+
+#define AHB_DEVICE(name, busid, base, plat) \
+static AMBA_AHB_DEVICE(name, busid, 0, REALVIEW_##base##_BASE, base##_IRQ, plat)
struct machine_desc;
diff --git a/arch/arm/mach-realview/include/mach/entry-macro.S b/arch/arm/mach-realview/include/mach/entry-macro.S
deleted file mode 100644
index e8a5179..0000000
--- a/arch/arm/mach-realview/include/mach/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for RealView platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
diff --git a/arch/arm/mach-realview/include/mach/irqs-pb1176.h b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
index 5c3c625..708f841 100644
--- a/arch/arm/mach-realview/include/mach/irqs-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/irqs-pb1176.h
@@ -40,6 +40,7 @@
#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13)
#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14)
#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */
+#define IRQ_DC1176_GPIO0 (IRQ_DC1176_GIC_START + 16)
#define IRQ_DC1176_SSP (IRQ_DC1176_GIC_START + 17) /* SSP port */
#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */
#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */
@@ -73,7 +74,6 @@
#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */
#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */
-#define IRQ_PB1176_GPIO0 -1
#define IRQ_PB1176_SCTL -1
#define NR_GIC_PB1176 2
diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h
deleted file mode 100644
index 471b671..0000000
--- a/arch/arm/mach-realview/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-realview/include/mach/system.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 9578145..157e1bc6 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -135,63 +135,63 @@
/*
* These devices are connected via the core APB bridge
*/
-#define GPIO2_IRQ { IRQ_EB_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_EB_GPIO3, NO_IRQ }
+#define GPIO2_IRQ { IRQ_EB_GPIO2 }
+#define GPIO3_IRQ { IRQ_EB_GPIO3 }
-#define AACI_IRQ { IRQ_EB_AACI, NO_IRQ }
+#define AACI_IRQ { IRQ_EB_AACI }
#define MMCI0_IRQ { IRQ_EB_MMCI0A, IRQ_EB_MMCI0B }
-#define KMI0_IRQ { IRQ_EB_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_EB_KMI1, NO_IRQ }
+#define KMI0_IRQ { IRQ_EB_KMI0 }
+#define KMI1_IRQ { IRQ_EB_KMI1 }
/*
* These devices are connected directly to the multi-layer AHB switch
*/
-#define EB_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define EB_CLCD_IRQ { IRQ_EB_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_EB_DMA, NO_IRQ }
+#define EB_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define EB_CLCD_IRQ { IRQ_EB_CLCD }
+#define DMAC_IRQ { IRQ_EB_DMA }
/*
* These devices are connected via the core APB bridge
*/
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG, NO_IRQ }
-#define EB_GPIO0_IRQ { IRQ_EB_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_EB_GPIO1, NO_IRQ }
-#define EB_RTC_IRQ { IRQ_EB_RTC, NO_IRQ }
+#define SCTL_IRQ { }
+#define EB_WATCHDOG_IRQ { IRQ_EB_WDOG }
+#define EB_GPIO0_IRQ { IRQ_EB_GPIO0 }
+#define GPIO1_IRQ { IRQ_EB_GPIO1 }
+#define EB_RTC_IRQ { IRQ_EB_RTC }
/*
* These devices are connected via the DMA APB bridge
*/
-#define SCI_IRQ { IRQ_EB_SCI, NO_IRQ }
-#define EB_UART0_IRQ { IRQ_EB_UART0, NO_IRQ }
-#define EB_UART1_IRQ { IRQ_EB_UART1, NO_IRQ }
-#define EB_UART2_IRQ { IRQ_EB_UART2, NO_IRQ }
-#define EB_UART3_IRQ { IRQ_EB_UART3, NO_IRQ }
-#define EB_SSP_IRQ { IRQ_EB_SSP, NO_IRQ }
+#define SCI_IRQ { IRQ_EB_SCI }
+#define EB_UART0_IRQ { IRQ_EB_UART0 }
+#define EB_UART1_IRQ { IRQ_EB_UART1 }
+#define EB_UART2_IRQ { IRQ_EB_UART2 }
+#define EB_UART3_IRQ { IRQ_EB_UART3 }
+#define EB_SSP_IRQ { IRQ_EB_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", EB_SMC, NULL);
-AMBA_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "dev:dmac", DMAC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", EB_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", EB_SMC, NULL);
+AHB_DEVICE(clcd, "dev:clcd", EB_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "dev:dmac", DMAC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", EB_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", EB_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", EB_SSP, &ssp0_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index e4abe94..b1d7caf 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -132,50 +132,50 @@
/*
* RealView PB1176 AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PB1176_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PB1176_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_PB1176_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PB1176_GPIO2 }
+#define GPIO3_IRQ { IRQ_PB1176_GPIO3 }
+#define AACI_IRQ { IRQ_PB1176_AACI }
#define MMCI0_IRQ { IRQ_PB1176_MMCI0A, IRQ_PB1176_MMCI0B }
-#define KMI0_IRQ { IRQ_PB1176_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_PB1176_KMI1, NO_IRQ }
-#define PB1176_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG, NO_IRQ }
-#define PB1176_GPIO0_IRQ { IRQ_PB1176_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PB1176_GPIO1, NO_IRQ }
-#define PB1176_RTC_IRQ { IRQ_DC1176_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PB1176_SCI, NO_IRQ }
-#define PB1176_UART0_IRQ { IRQ_DC1176_UART0, NO_IRQ }
-#define PB1176_UART1_IRQ { IRQ_DC1176_UART1, NO_IRQ }
-#define PB1176_UART2_IRQ { IRQ_DC1176_UART2, NO_IRQ }
-#define PB1176_UART3_IRQ { IRQ_DC1176_UART3, NO_IRQ }
-#define PB1176_UART4_IRQ { IRQ_PB1176_UART4, NO_IRQ }
-#define PB1176_SSP_IRQ { IRQ_DC1176_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_PB1176_KMI0 }
+#define KMI1_IRQ { IRQ_PB1176_KMI1 }
+#define PB1176_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PB1176_CLCD_IRQ { IRQ_DC1176_CLCD }
+#define SCTL_IRQ { }
+#define PB1176_WATCHDOG_IRQ { IRQ_DC1176_WATCHDOG }
+#define PB1176_GPIO0_IRQ { IRQ_DC1176_GPIO0 }
+#define GPIO1_IRQ { IRQ_PB1176_GPIO1 }
+#define PB1176_RTC_IRQ { IRQ_DC1176_RTC }
+#define SCI_IRQ { IRQ_PB1176_SCI }
+#define PB1176_UART0_IRQ { IRQ_DC1176_UART0 }
+#define PB1176_UART1_IRQ { IRQ_DC1176_UART1 }
+#define PB1176_UART2_IRQ { IRQ_DC1176_UART2 }
+#define PB1176_UART3_IRQ { IRQ_DC1176_UART3 }
+#define PB1176_UART4_IRQ { IRQ_PB1176_UART4 }
+#define PB1176_SSP_IRQ { IRQ_DC1176_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart4, "fpga:uart4", PB1176_UART4, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PB1176_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL);
-AMBA_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data);
-AMBA_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data);
+AHB_DEVICE(smc, "dev:smc", PB1176_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PB1176_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PB1176_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PB1176_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PB1176_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PB1176_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PB1176_UART2, NULL);
+APB_DEVICE(uart3, "dev:uart3", PB1176_UART3, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PB1176_SSP, &ssp0_plat_data);
+AHB_DEVICE(clcd, "dev:clcd", PB1176_CLCD, &clcd_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&uart0_device,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 2147335..ae7fe54 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -127,52 +127,52 @@
* RealView PB11MPCore AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PB11MP_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PB11MP_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_TC11MP_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PB11MP_GPIO2 }
+#define GPIO3_IRQ { IRQ_PB11MP_GPIO3 }
+#define AACI_IRQ { IRQ_TC11MP_AACI }
#define MMCI0_IRQ { IRQ_TC11MP_MMCI0A, IRQ_TC11MP_MMCI0B }
-#define KMI0_IRQ { IRQ_TC11MP_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_TC11MP_KMI1, NO_IRQ }
-#define PB11MP_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_PB11MP_DMAC, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG, NO_IRQ }
-#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PB11MP_GPIO1, NO_IRQ }
-#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PB11MP_SCI, NO_IRQ }
-#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0, NO_IRQ }
-#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1, NO_IRQ }
-#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2, NO_IRQ }
-#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3, NO_IRQ }
-#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_TC11MP_KMI0 }
+#define KMI1_IRQ { IRQ_TC11MP_KMI1 }
+#define PB11MP_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PB11MP_CLCD_IRQ { IRQ_PB11MP_CLCD }
+#define DMAC_IRQ { IRQ_PB11MP_DMAC }
+#define SCTL_IRQ { }
+#define PB11MP_WATCHDOG_IRQ { IRQ_PB11MP_WATCHDOG }
+#define PB11MP_GPIO0_IRQ { IRQ_PB11MP_GPIO0 }
+#define GPIO1_IRQ { IRQ_PB11MP_GPIO1 }
+#define PB11MP_RTC_IRQ { IRQ_TC11MP_RTC }
+#define SCI_IRQ { IRQ_PB11MP_SCI }
+#define PB11MP_UART0_IRQ { IRQ_TC11MP_UART0 }
+#define PB11MP_UART1_IRQ { IRQ_TC11MP_UART1 }
+#define PB11MP_UART2_IRQ { IRQ_PB11MP_UART2 }
+#define PB11MP_UART3_IRQ { IRQ_PB11MP_UART3 }
+#define PB11MP_SSP_IRQ { IRQ_PB11MP_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", PB11MP_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", PB11MP_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PB11MP_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PB11MP_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PB11MP_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PB11MP_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PB11MP_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PB11MP_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PB11MP_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
+AHB_DEVICE(clcd, "issp:clcd", PB11MP_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 25b2e59..5965017 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -122,52 +122,52 @@
* RealView PBA8Core AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PBA8_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PBA8_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_PBA8_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PBA8_GPIO2 }
+#define GPIO3_IRQ { IRQ_PBA8_GPIO3 }
+#define AACI_IRQ { IRQ_PBA8_AACI }
#define MMCI0_IRQ { IRQ_PBA8_MMCI0A, IRQ_PBA8_MMCI0B }
-#define KMI0_IRQ { IRQ_PBA8_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_PBA8_KMI1, NO_IRQ }
-#define PBA8_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_PBA8_DMAC, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG, NO_IRQ }
-#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PBA8_GPIO1, NO_IRQ }
-#define PBA8_RTC_IRQ { IRQ_PBA8_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PBA8_SCI, NO_IRQ }
-#define PBA8_UART0_IRQ { IRQ_PBA8_UART0, NO_IRQ }
-#define PBA8_UART1_IRQ { IRQ_PBA8_UART1, NO_IRQ }
-#define PBA8_UART2_IRQ { IRQ_PBA8_UART2, NO_IRQ }
-#define PBA8_UART3_IRQ { IRQ_PBA8_UART3, NO_IRQ }
-#define PBA8_SSP_IRQ { IRQ_PBA8_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_PBA8_KMI0 }
+#define KMI1_IRQ { IRQ_PBA8_KMI1 }
+#define PBA8_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PBA8_CLCD_IRQ { IRQ_PBA8_CLCD }
+#define DMAC_IRQ { IRQ_PBA8_DMAC }
+#define SCTL_IRQ { }
+#define PBA8_WATCHDOG_IRQ { IRQ_PBA8_WATCHDOG }
+#define PBA8_GPIO0_IRQ { IRQ_PBA8_GPIO0 }
+#define GPIO1_IRQ { IRQ_PBA8_GPIO1 }
+#define PBA8_RTC_IRQ { IRQ_PBA8_RTC }
+#define SCI_IRQ { IRQ_PBA8_SCI }
+#define PBA8_UART0_IRQ { IRQ_PBA8_UART0 }
+#define PBA8_UART1_IRQ { IRQ_PBA8_UART1 }
+#define PBA8_UART2_IRQ { IRQ_PBA8_UART2 }
+#define PBA8_UART3_IRQ { IRQ_PBA8_UART3 }
+#define PBA8_SSP_IRQ { IRQ_PBA8_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", PBA8_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PBA8_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", PBA8_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PBA8_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PBA8_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PBA8_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PBA8_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PBA8_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PBA8_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PBA8_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
+AHB_DEVICE(clcd, "issp:clcd", PBA8_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ac71564..1cd9956 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -144,52 +144,52 @@
* RealView PBXCore AMBA devices
*/
-#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ }
-#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ }
+#define GPIO2_IRQ { IRQ_PBX_GPIO2 }
+#define GPIO3_IRQ { IRQ_PBX_GPIO3 }
+#define AACI_IRQ { IRQ_PBX_AACI }
#define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
-#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ }
-#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ }
-#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ }
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ }
-#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ }
-#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ }
-#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ }
-#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ }
-#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ }
-#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ }
-#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ }
-#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ }
+#define KMI0_IRQ { IRQ_PBX_KMI0 }
+#define KMI1_IRQ { IRQ_PBX_KMI1 }
+#define PBX_SMC_IRQ { }
+#define MPMC_IRQ { }
+#define PBX_CLCD_IRQ { IRQ_PBX_CLCD }
+#define DMAC_IRQ { IRQ_PBX_DMAC }
+#define SCTL_IRQ { }
+#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG }
+#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0 }
+#define GPIO1_IRQ { IRQ_PBX_GPIO1 }
+#define PBX_RTC_IRQ { IRQ_PBX_RTC }
+#define SCI_IRQ { IRQ_PBX_SCI }
+#define PBX_UART0_IRQ { IRQ_PBX_UART0 }
+#define PBX_UART1_IRQ { IRQ_PBX_UART1 }
+#define PBX_UART2_IRQ { IRQ_PBX_UART2 }
+#define PBX_UART3_IRQ { IRQ_PBX_UART3 }
+#define PBX_SSP_IRQ { IRQ_PBX_SSP }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
-AMBA_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL);
+APB_DEVICE(aaci, "fpga:aaci", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
+APB_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:smc", PBX_SMC, NULL);
-AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL);
-AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:smc", PBX_SMC, NULL);
+AHB_DEVICE(sctl, "dev:sctl", SCTL, NULL);
+APB_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
+APB_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
+APB_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL);
+APB_DEVICE(sci0, "dev:sci0", SCI, NULL);
+APB_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL);
+APB_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL);
+APB_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL);
+APB_DEVICE(ssp0, "dev:ssp0", PBX_SSP, &ssp0_plat_data);
/* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
+AHB_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-rpc/Makefile b/arch/arm/mach-rpc/Makefile
index aa77bc9..dfa405c 100644
--- a/arch/arm/mach-rpc/Makefile
+++ b/arch/arm/mach-rpc/Makefile
@@ -4,7 +4,7 @@
# Object file lists.
-obj-y := dma.o irq.o riscpc.o
+obj-y := dma.o fiq.o irq.o riscpc.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-rpc/fiq.S b/arch/arm/mach-rpc/fiq.S
new file mode 100644
index 0000000..48ddd57
--- /dev/null
+++ b/arch/arm/mach-rpc/fiq.S
@@ -0,0 +1,16 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/hardware.h>
+#include <mach/entry-macro.S>
+
+ .text
+
+ .global rpc_default_fiq_end
+ENTRY(rpc_default_fiq_start)
+ mov r12, #ioc_base_high
+ .if ioc_base_low
+ orr r12, r12, #ioc_base_low
+ .endif
+ strb r12, [r12, #0x38] @ Disable FIQ register
+ subs pc, lr, #4
+rpc_default_fiq_end:
diff --git a/arch/arm/mach-rpc/include/mach/entry-macro.S b/arch/arm/mach-rpc/include/mach/entry-macro.S
index 4e7e541..7178368 100644
--- a/arch/arm/mach-rpc/include/mach/entry-macro.S
+++ b/arch/arm/mach-rpc/include/mach/entry-macro.S
@@ -10,7 +10,3 @@
orr \base, \base, #ioc_base_low
.endif
.endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
diff --git a/arch/arm/mach-rpc/include/mach/system.h b/arch/arm/mach-rpc/include/mach/system.h
deleted file mode 100644
index 359bab9..0000000
--- a/arch/arm/mach-rpc/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-rpc/include/mach/system.h
- *
- * Copyright (C) 1996-1999 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-rpc/irq.c b/arch/arm/mach-rpc/irq.c
index 2e1b530..cf0e669 100644
--- a/arch/arm/mach-rpc/irq.c
+++ b/arch/arm/mach-rpc/irq.c
@@ -5,6 +5,7 @@
#include <asm/mach/irq.h>
#include <asm/hardware/iomd.h>
#include <asm/irq.h>
+#include <asm/fiq.h>
static void iomd_ack_irq_a(struct irq_data *d)
{
@@ -112,6 +113,8 @@
.irq_unmask = iomd_unmask_irq_fiq,
};
+extern unsigned char rpc_default_fiq_start, rpc_default_fiq_end;
+
void __init rpc_init_irq(void)
{
unsigned int irq, flags;
@@ -121,6 +124,9 @@
iomd_writeb(0, IOMD_FIQMASK);
iomd_writeb(0, IOMD_DMAMASK);
+ set_fiq_handler(&rpc_default_fiq_start,
+ &rpc_default_fiq_end - &rpc_default_fiq_start);
+
for (irq = 0; irq < NR_IRQS; irq++) {
flags = IRQF_VALID;
diff --git a/arch/arm/mach-s3c2410/include/mach/entry-macro.S b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
index 473b3cd..7615a14 100644
--- a/arch/arm/mach-s3c2410/include/mach/entry-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/entry-macro.S
@@ -25,9 +25,6 @@
.macro get_irqnr_preamble, base, tmp
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \base, #S3C24XX_VA_IRQ
@@ -71,8 +68,3 @@
@@ exit here, Z flag unset if IRQ
.endm
-
- /* currently don't need an disable_fiq macro */
-
- .macro disable_fiq
- .endm
diff --git a/arch/arm/mach-s3c2410/include/mach/system.h b/arch/arm/mach-s3c2410/include/mach/system.h
deleted file mode 100644
index 5e215c1..0000000
--- a/arch/arm/mach-s3c2410/include/mach/system.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/system.h
- *
- * Copyright (c) 2003 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - System function defines and includes
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-#include <mach/map.h>
-#include <mach/idle.h>
-
-#include <mach/regs-clock.h>
-
-void (*s3c24xx_idle)(void);
-
-void s3c24xx_default_idle(void)
-{
- unsigned long tmp;
- int i;
-
- /* idle the system by using the idle mode which will wait for an
- * interrupt to happen before restarting the system.
- */
-
- /* Warning: going into idle state upsets jtag scanning */
-
- __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
- S3C2410_CLKCON);
-
- /* the samsung port seems to do a loop and then unset idle.. */
- for (i = 0; i < 50; i++) {
- tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
- }
-
- /* this bit is not cleared on re-start... */
-
- __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
- S3C2410_CLKCON);
-}
-
-static void arch_idle(void)
-{
- if (s3c24xx_idle != NULL)
- (s3c24xx_idle)();
- else
- s3c24xx_default_idle();
-}
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 41245a6..6b21ba1 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -162,7 +162,7 @@
return (latch_state >> (offset + 16)) & 1;
}
-struct gpio_chip h1940_latch_gpiochip = {
+static struct gpio_chip h1940_latch_gpiochip = {
.base = H1940_LATCH_GPIO(0),
.owner = THIS_MODULE,
.label = "H1940_LATCH",
@@ -304,7 +304,7 @@
{ .volt = 3841, .cur = 0, .level = 0},
};
-int h1940_bat_init(void)
+static int h1940_bat_init(void)
{
int ret;
@@ -317,17 +317,17 @@
}
-void h1940_bat_exit(void)
+static void h1940_bat_exit(void)
{
gpio_free(H1940_LATCH_SM803_ENABLE);
}
-void h1940_enable_charger(void)
+static void h1940_enable_charger(void)
{
gpio_set_value(H1940_LATCH_SM803_ENABLE, 1);
}
-void h1940_disable_charger(void)
+static void h1940_disable_charger(void)
{
gpio_set_value(H1940_LATCH_SM803_ENABLE, 0);
}
@@ -364,7 +364,7 @@
},
};
-DEFINE_SPINLOCK(h1940_blink_spin);
+static DEFINE_SPINLOCK(h1940_blink_spin);
int h1940_led_blink_set(unsigned gpio, int state,
unsigned long *delay_on, unsigned long *delay_off)
diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c
index aff6e85..c6eac98 100644
--- a/arch/arm/mach-s3c2412/s3c2412.c
+++ b/arch/arm/mach-s3c2412/s3c2412.c
@@ -32,8 +32,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
-#include <mach/idle.h>
-
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
@@ -164,7 +162,7 @@
/* set our idle function */
- s3c24xx_idle = s3c2412_idle;
+ arm_pm_idle = s3c2412_idle;
/* register our io-tables */
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 59f54d1..e01490d 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -132,12 +132,6 @@
.ctrlbit = S3C2416_HCLKCON_HSMMC0,
};
-void __init_or_cpufreq s3c2416_setup_clocks(void)
-{
- s3c2443_common_setup_clocks(s3c2416_get_pll);
-}
-
-
static struct clksrc_clk *clksrcs[] __initdata = {
&hsspi_eplldiv,
&hsspi_mux,
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index eebe1e7..30a44f8 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -125,7 +125,7 @@
}
};
-void smdk2416_hsudc_gpio_init(void)
+static void smdk2416_hsudc_gpio_init(void)
{
s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_UP);
s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_NONE);
@@ -133,20 +133,20 @@
s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 0);
}
-void smdk2416_hsudc_gpio_uninit(void)
+static void smdk2416_hsudc_gpio_uninit(void)
{
s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 1);
s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(0));
}
-struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = {
+static struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = {
.epnum = 9,
.gpio_init = smdk2416_hsudc_gpio_init,
.gpio_uninit = smdk2416_hsudc_gpio_uninit,
};
-struct s3c_fb_pd_win smdk2416_fb_win[] = {
+static struct s3c_fb_pd_win smdk2416_fb_win[] = {
[0] = {
/* think this is the same as the smdk6410 */
.win_mode = {
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 5287d28..08bb035 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -44,7 +44,6 @@
#include <asm/proc-fns.h>
#include <asm/irq.h>
-#include <mach/idle.h>
#include <mach/regs-s3c2443-clock.h>
#include <plat/gpio-core.h>
@@ -88,8 +87,6 @@
{
printk(KERN_INFO "S3C2416: Initializing architecture\n");
- /* s3c24xx_idle = s3c2416_idle; */
-
/* change WDT IRQ number */
s3c_device_wdt.resource[1].start = IRQ_S3C2443_WDT;
s3c_device_wdt.resource[1].end = IRQ_S3C2443_WDT;
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index 9a4a5bc..cfd2020 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -258,7 +258,7 @@
.ramp_time = 5,
};
-struct pcf50633_platform_data gta02_pcf_pdata = {
+static struct pcf50633_platform_data gta02_pcf_pdata = {
.resumers = {
[0] = PCF50633_INT1_USBINS |
PCF50633_INT1_USBREM |
@@ -404,7 +404,7 @@
};
-struct platform_device s3c24xx_pwm_device = {
+static struct platform_device s3c24xx_pwm_device = {
.name = "s3c24xx_pwm",
.num_resources = 0,
};
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 6f68abf..200debb 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -217,7 +217,7 @@
{ .volt = 3820, .cur = 0, .level = 0},
};
-int rx1950_bat_init(void)
+static int rx1950_bat_init(void)
{
int ret;
@@ -236,25 +236,25 @@
return ret;
}
-void rx1950_bat_exit(void)
+static void rx1950_bat_exit(void)
{
gpio_free(S3C2410_GPJ(2));
gpio_free(S3C2410_GPJ(3));
}
-void rx1950_enable_charger(void)
+static void rx1950_enable_charger(void)
{
gpio_direction_output(S3C2410_GPJ(2), 1);
gpio_direction_output(S3C2410_GPJ(3), 1);
}
-void rx1950_disable_charger(void)
+static void rx1950_disable_charger(void)
{
gpio_direction_output(S3C2410_GPJ(2), 0);
gpio_direction_output(S3C2410_GPJ(3), 0);
}
-DEFINE_SPINLOCK(rx1950_blink_spin);
+static DEFINE_SPINLOCK(rx1950_blink_spin);
static int rx1950_led_blink_set(unsigned gpio, int state,
unsigned long *delay_on, unsigned long *delay_off)
@@ -382,7 +382,7 @@
static struct pwm_device *lcd_pwm;
-void rx1950_lcd_power(int enable)
+static void rx1950_lcd_power(int enable)
{
int i;
static int enabled;
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index dd20c66..326ea3a 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -83,6 +83,11 @@
help
Common setup code for SPI GPIO configurations
+config S3C64XX_SETUP_USB_PHY
+ bool
+ help
+ Common setup code for USB PHY controller
+
# S36400 Macchine support
config MACH_SMDK6400
@@ -157,6 +162,7 @@
select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_KEYPAD
+ select S3C64XX_SETUP_USB_PHY
help
Machine support for the Samsung SMDK6410
@@ -256,6 +262,7 @@
select S3C_DEV_USB_HOST
select S3C64XX_SETUP_SDHCI
select S3C64XX_SETUP_FB_24BPP
+ select S3C64XX_SETUP_USB_PHY
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
@@ -283,6 +290,7 @@
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_KEYPAD
select S3C64XX_SETUP_SPI
+ select S3C64XX_SETUP_USB_PHY
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_KEYPAD
select S3C_DEV_USB_HOST
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 1822ac2..f9ce1dc 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -22,6 +22,7 @@
# PM
obj-$(CONFIG_PM) += pm.o irq-pm.o sleep.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
# DMA support
@@ -42,6 +43,7 @@
obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi.o
+obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy.o
# Machine support
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index aebbcc2..52f079a 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -207,6 +207,15 @@
.enable = s3c64xx_sclk_ctrl,
.ctrlbit = S3C_CLKCON_SCLK_MMC2_48,
}, {
+ .name = "ac97",
+ .parent = &clk_p,
+ .ctrlbit = S3C_CLKCON_PCLK_AC97,
+ }, {
+ .name = "cfcon",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_IHOST,
+ }, {
.name = "dma0",
.parent = &clk_h,
.enable = s3c64xx_hclk_ctrl,
@@ -216,6 +225,107 @@
.parent = &clk_h,
.enable = s3c64xx_hclk_ctrl,
.ctrlbit = S3C_CLKCON_HCLK_DMA1,
+ }, {
+ .name = "3dse",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_3DSE,
+ }, {
+ .name = "hclk_secur",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_SECUR,
+ }, {
+ .name = "sdma1",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_SDMA1,
+ }, {
+ .name = "sdma0",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_SDMA0,
+ }, {
+ .name = "hclk_jpeg",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_JPEG,
+ }, {
+ .name = "camif",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_CAMIF,
+ }, {
+ .name = "hclk_scaler",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_SCALER,
+ }, {
+ .name = "2d",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_2D,
+ }, {
+ .name = "tv",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_TV,
+ }, {
+ .name = "post0",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_POST0,
+ }, {
+ .name = "rot",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_ROT,
+ }, {
+ .name = "hclk_mfc",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_MFC,
+ }, {
+ .name = "pclk_mfc",
+ .parent = &clk_p,
+ .enable = s3c64xx_pclk_ctrl,
+ .ctrlbit = S3C_CLKCON_PCLK_MFC,
+ }, {
+ .name = "dac27",
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_DAC27,
+ }, {
+ .name = "tv27",
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_TV27,
+ }, {
+ .name = "scaler27",
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_SCALER27,
+ }, {
+ .name = "sclk_scaler",
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_SCALER,
+ }, {
+ .name = "post0_27",
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_POST0_27,
+ }, {
+ .name = "secur",
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_SECUR,
+ }, {
+ .name = "sclk_mfc",
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_MFC,
+ }, {
+ .name = "cam",
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_CAM,
+ }, {
+ .name = "sclk_jpeg",
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_JPEG,
},
};
@@ -289,16 +399,7 @@
.name = "watchdog",
.parent = &clk_p,
.ctrlbit = S3C_CLKCON_PCLK_WDT,
- }, {
- .name = "ac97",
- .parent = &clk_p,
- .ctrlbit = S3C_CLKCON_PCLK_AC97,
- }, {
- .name = "cfcon",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_IHOST,
- }
+ },
};
static struct clk clk_hsmmc0 = {
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index 5eb9c9a..7a10be6 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -25,8 +25,6 @@
void s3c64xx_restart(char mode, const char *cmd);
-extern struct syscore_ops s3c64xx_irq_syscore_ops;
-
#ifdef CONFIG_CPU_S3C6400
extern int s3c6400_init(void);
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
new file mode 100644
index 0000000..179460f
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -0,0 +1,91 @@
+/* linux/arch/arm/mach-s3c64xx/cpuidle.c
+ *
+ * Copyright (c) 2011 Wolfson Microelectronics, plc
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <linux/export.h>
+#include <linux/time.h>
+
+#include <asm/proc-fns.h>
+
+#include <mach/map.h>
+
+#include <mach/regs-sys.h>
+#include <mach/regs-syscon-power.h>
+
+static int s3c64xx_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv,
+ int index)
+{
+ struct timeval before, after;
+ unsigned long tmp;
+ int idle_time;
+
+ local_irq_disable();
+ do_gettimeofday(&before);
+
+ /* Setup PWRCFG to enter idle mode */
+ tmp = __raw_readl(S3C64XX_PWR_CFG);
+ tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+ tmp |= S3C64XX_PWRCFG_CFG_WFI_IDLE;
+ __raw_writel(tmp, S3C64XX_PWR_CFG);
+
+ cpu_do_idle();
+
+ do_gettimeofday(&after);
+ local_irq_enable();
+ idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+ (after.tv_usec - before.tv_usec);
+
+ dev->last_residency = idle_time;
+ return index;
+}
+
+static struct cpuidle_state s3c64xx_cpuidle_set[] = {
+ [0] = {
+ .enter = s3c64xx_enter_idle,
+ .exit_latency = 1,
+ .target_residency = 1,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "IDLE",
+ .desc = "System active, ARM gated",
+ },
+};
+
+static struct cpuidle_driver s3c64xx_cpuidle_driver = {
+ .name = "s3c64xx_cpuidle",
+ .owner = THIS_MODULE,
+ .state_count = ARRAY_SIZE(s3c64xx_cpuidle_set),
+};
+
+static struct cpuidle_device s3c64xx_cpuidle_device = {
+ .state_count = ARRAY_SIZE(s3c64xx_cpuidle_set),
+};
+
+static int __init s3c64xx_init_cpuidle(void)
+{
+ int ret;
+
+ memcpy(s3c64xx_cpuidle_driver.states, s3c64xx_cpuidle_set,
+ sizeof(s3c64xx_cpuidle_set));
+ cpuidle_register_driver(&s3c64xx_cpuidle_driver);
+
+ ret = cpuidle_register_device(&s3c64xx_cpuidle_device);
+ if (ret) {
+ pr_err("Failed to register cpuidle device: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+device_initcall(s3c64xx_init_cpuidle);
diff --git a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S b/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
deleted file mode 100644
index dc2bc15..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,19 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/entry-macro.S
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Low-level IRQ helper macros for the Samsung S3C64XX series
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
-*/
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-s3c64xx/include/mach/system.h b/arch/arm/mach-s3c64xx/include/mach/system.h
deleted file mode 100644
index 353ed43..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s3c6400/include/mach/system.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400 - system implementation
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/irq-pm.c b/arch/arm/mach-s3c64xx/irq-pm.c
index 8bec61e..0c7e1d9 100644
--- a/arch/arm/mach-s3c64xx/irq-pm.c
+++ b/arch/arm/mach-s3c64xx/irq-pm.c
@@ -96,7 +96,7 @@
S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
}
-struct syscore_ops s3c64xx_irq_syscore_ops = {
+static struct syscore_ops s3c64xx_irq_syscore_ops = {
.suspend = s3c64xx_irq_pm_suspend,
.resume = s3c64xx_irq_pm_resume,
};
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 8077f65..3b56bd9 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -59,6 +59,7 @@
#include <plat/sdhci.h>
#include <plat/gpio-cfg.h>
#include <plat/s3c64xx-spi.h>
+#include <plat/udc-hs.h>
#include <plat/keypad.h>
#include <plat/clock.h>
@@ -698,6 +699,8 @@
.cfg_gpio = crag6410_cfg_sdhci0,
};
+static struct s3c_hsotg_plat crag6410_hsotg_pdata;
+
static void __init crag6410_machine_init(void)
{
/* Open drain IRQs need pullups */
@@ -722,6 +725,7 @@
s3c_i2c0_set_platdata(&i2c0_pdata);
s3c_i2c1_set_platdata(&i2c1_pdata);
s3c_fb_set_platdata(&crag6410_lcd_pdata);
+ s3c_hsotg_set_platdata(&crag6410_hsotg_pdata);
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index ce31db1..ce745e1 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -187,6 +187,8 @@
},
};
+static struct s3c_hsotg_plat smartq_hsotg_pdata;
+
static int __init smartq_lcd_setup_gpio(void)
{
int ret;
@@ -383,6 +385,7 @@
void __init smartq_machine_init(void)
{
s3c_i2c0_set_platdata(NULL);
+ s3c_hsotg_set_platdata(&smartq_hsotg_pdata);
s3c_hwmon_set_platdata(&smartq_hwmon_pdata);
s3c_sdhci1_set_platdata(&smartq_internal_hsmmc_pdata);
s3c_sdhci2_set_platdata(&smartq_internal_hsmmc_pdata);
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index ca6fc20..d55bc96 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -72,6 +72,7 @@
#include <plat/keypad.h>
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
+#include <plat/udc-hs.h>
#include "common.h"
@@ -631,6 +632,8 @@
.pwm_id = 1,
};
+static struct s3c_hsotg_plat smdk6410_hsotg_pdata;
+
static void __init smdk6410_map_io(void)
{
u32 tmp;
@@ -659,6 +662,7 @@
s3c_i2c0_set_platdata(NULL);
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+ s3c_hsotg_set_platdata(&smdk6410_hsotg_pdata);
samsung_keypad_set_platdata(&smdk6410_keypad_data);
diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c
new file mode 100644
index 0000000..f6757e0
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <mach/map.h>
+#include <mach/regs-sys.h>
+#include <plat/cpu.h>
+#include <plat/regs-usb-hsotg-phy.h>
+#include <plat/usb-phy.h>
+
+static int s3c_usb_otgphy_init(struct platform_device *pdev)
+{
+ struct clk *xusbxti;
+ u32 phyclk;
+
+ writel(readl(S3C64XX_OTHERS) | S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
+
+ /* set clock frequency for PLL */
+ phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
+
+ xusbxti = clk_get(&pdev->dev, "xusbxti");
+ if (xusbxti && !IS_ERR(xusbxti)) {
+ switch (clk_get_rate(xusbxti)) {
+ case 12 * MHZ:
+ phyclk |= S3C_PHYCLK_CLKSEL_12M;
+ break;
+ case 24 * MHZ:
+ phyclk |= S3C_PHYCLK_CLKSEL_24M;
+ break;
+ default:
+ case 48 * MHZ:
+ /* default reference clock */
+ break;
+ }
+ clk_put(xusbxti);
+ }
+
+ /* TODO: select external clock/oscillator */
+ writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK);
+
+ /* set to normal OTG PHY */
+ writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR);
+ mdelay(1);
+
+ /* reset OTG PHY and Link */
+ writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK,
+ S3C_RSTCON);
+ udelay(20); /* at-least 10uS */
+ writel(0, S3C_RSTCON);
+
+ return 0;
+}
+
+static int s3c_usb_otgphy_exit(struct platform_device *pdev)
+{
+ writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN |
+ S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR);
+
+ writel(readl(S3C64XX_OTHERS) & ~S3C64XX_OTHERS_USBMASK, S3C64XX_OTHERS);
+
+ return 0;
+}
+
+int s5p_usb_phy_init(struct platform_device *pdev, int type)
+{
+ if (type == S5P_USB_PHY_DEVICE)
+ return s3c_usb_otgphy_init(pdev);
+
+ return -EINVAL;
+}
+
+int s5p_usb_phy_exit(struct platform_device *pdev, int type)
+{
+ if (type == S5P_USB_PHY_DEVICE)
+ return s3c_usb_otgphy_exit(pdev);
+
+ return -EINVAL;
+}
diff --git a/arch/arm/mach-s5p64x0/clock.c b/arch/arm/mach-s5p64x0/clock.c
index 241d0e6..57e7189 100644
--- a/arch/arm/mach-s5p64x0/clock.c
+++ b/arch/arm/mach-s5p64x0/clock.c
@@ -73,7 +73,7 @@
{L2 * 1000, (3 << ARM_DIV_RATIO_SHIFT), (0 << S5P64X0_CLKDIV0_HCLK_SHIFT)},
};
-unsigned long s5p64x0_armclk_get_rate(struct clk *clk)
+static unsigned long s5p64x0_armclk_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
u32 clkdiv;
@@ -84,7 +84,8 @@
return rate / (clkdiv + 1);
}
-unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate)
+static unsigned long s5p64x0_armclk_round_rate(struct clk *clk,
+ unsigned long rate)
{
u32 iter;
@@ -96,7 +97,7 @@
return clock_table[ARRAY_SIZE(clock_table) - 1][0];
}
-int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate)
+static int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate)
{
u32 round_tmp;
u32 iter;
@@ -148,7 +149,7 @@
return 0;
}
-struct clk_ops s5p64x0_clkarm_ops = {
+static struct clk_ops s5p64x0_clkarm_ops = {
.get_rate = s5p64x0_armclk_get_rate,
.set_rate = s5p64x0_armclk_set_rate,
.round_rate = s5p64x0_armclk_round_rate,
@@ -173,7 +174,7 @@
.reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 4, .size = 1 },
};
-struct clk *clkset_hclk_low_list[] = {
+static struct clk *clkset_hclk_low_list[] = {
&clk_mout_apll.clk,
&clk_mout_mpll.clk,
};
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 52b89a3..9143f8b 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -146,15 +146,12 @@
{
unsigned long val;
- if (!need_resched()) {
- val = __raw_readl(S5P64X0_PWR_CFG);
- val &= ~(0x3 << 5);
- val |= (0x1 << 5);
- __raw_writel(val, S5P64X0_PWR_CFG);
+ val = __raw_readl(S5P64X0_PWR_CFG);
+ val &= ~(0x3 << 5);
+ val |= (0x1 << 5);
+ __raw_writel(val, S5P64X0_PWR_CFG);
- cpu_do_idle();
- }
- local_irq_enable();
+ cpu_do_idle();
}
/*
@@ -286,7 +283,7 @@
printk(KERN_INFO "S5P64X0(S5P6440/S5P6450): Initializing architecture\n");
/* set idle function */
- pm_idle = s5p64x0_idle;
+ arm_pm_idle = s5p64x0_idle;
return device_register(&s5p64x0_dev);
}
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index f820c07..2ee5dc0 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -38,7 +38,7 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-u8 s5p6440_pdma_peri[] = {
+static u8 s5p6440_pdma_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
@@ -63,12 +63,12 @@
DMACH_SPI1_RX,
};
-struct dma_pl330_platdata s5p6440_pdma_pdata = {
+static struct dma_pl330_platdata s5p6440_pdma_pdata = {
.nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
.peri_id = s5p6440_pdma_peri,
};
-u8 s5p6450_pdma_peri[] = {
+static u8 s5p6450_pdma_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
@@ -103,39 +103,27 @@
DMACH_UART5_TX,
};
-struct dma_pl330_platdata s5p6450_pdma_pdata = {
+static struct dma_pl330_platdata s5p6450_pdma_pdata = {
.nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
.peri_id = s5p6450_pdma_peri,
};
-struct amba_device s5p64x0_device_pdma = {
- .dev = {
- .init_name = "dma-pl330",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .res = {
- .start = S5P64X0_PA_PDMA,
- .end = S5P64X0_PA_PDMA + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_DMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+static AMBA_AHB_DEVICE(s5p64x0_pdma, "dma-pl330", 0x00041330,
+ S5P64X0_PA_PDMA, {IRQ_DMA0}, NULL);
static int __init s5p64x0_dma_init(void)
{
if (soc_is_s5p6450()) {
dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
- s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
+ s5p64x0_pdma_device.dev.platform_data = &s5p6450_pdma_pdata;
} else {
dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
- s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+ s5p64x0_pdma_device.dev.platform_data = &s5p6440_pdma_pdata;
}
- amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
+ amba_device_register(&s5p64x0_pdma_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S b/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
deleted file mode 100644
index fbb246d..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/entry-macro.S
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Low-level IRQ helper macros for the Samsung S5P64X0
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
index ff85b4b..0ef47d1 100644
--- a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
+++ b/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
@@ -22,16 +22,9 @@
extern int s5p64x0_epll_enable(struct clk *clk, int enable);
extern unsigned long s5p64x0_epll_get_rate(struct clk *clk);
-extern unsigned long s5p64x0_armclk_get_rate(struct clk *clk);
-extern unsigned long s5p64x0_armclk_round_rate(struct clk *clk, unsigned long rate);
-extern int s5p64x0_armclk_set_rate(struct clk *clk, unsigned long rate);
-
-extern struct clk_ops s5p64x0_clkarm_ops;
-
extern struct clksrc_clk clk_armclk;
extern struct clksrc_clk clk_dout_mpll;
-extern struct clk *clkset_hclk_low_list[];
extern struct clksrc_sources clkset_hclk_low;
extern int s5p64x0_pclk_ctrl(struct clk *clk, int enable);
diff --git a/arch/arm/mach-s5p64x0/include/mach/system.h b/arch/arm/mach-s5p64x0/include/mach/system.h
deleted file mode 100644
index cf26e09..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/system.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index 247194d..16eca4e 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -170,7 +170,7 @@
[1] = &clk_div_apll2.clk,
};
-struct clksrc_sources clk_src_mout_am = {
+static struct clksrc_sources clk_src_mout_am = {
.sources = clk_src_mout_am_list,
.nr_sources = ARRAY_SIZE(clk_src_mout_am_list),
};
@@ -212,7 +212,7 @@
[1] = &clk_div_d1_bus.clk,
};
-struct clksrc_sources clk_src_mout_onenand = {
+static struct clksrc_sources clk_src_mout_onenand = {
.sources = clk_src_mout_onenand_list,
.nr_sources = ARRAY_SIZE(clk_src_mout_onenand_list),
};
@@ -756,7 +756,7 @@
[3] = &clk_mout_hpll.clk,
};
-struct clksrc_sources clk_src_group1 = {
+static struct clksrc_sources clk_src_group1 = {
.sources = clk_src_group1_list,
.nr_sources = ARRAY_SIZE(clk_src_group1_list),
};
@@ -766,7 +766,7 @@
[1] = &clk_div_mpll.clk,
};
-struct clksrc_sources clk_src_group2 = {
+static struct clksrc_sources clk_src_group2 = {
.sources = clk_src_group2_list,
.nr_sources = ARRAY_SIZE(clk_src_group2_list),
};
@@ -780,7 +780,7 @@
[5] = &clk_mout_hpll.clk,
};
-struct clksrc_sources clk_src_group3 = {
+static struct clksrc_sources clk_src_group3 = {
.sources = clk_src_group3_list,
.nr_sources = ARRAY_SIZE(clk_src_group3_list),
};
@@ -806,7 +806,7 @@
[5] = &clk_mout_hpll.clk,
};
-struct clksrc_sources clk_src_group4 = {
+static struct clksrc_sources clk_src_group4 = {
.sources = clk_src_group4_list,
.nr_sources = ARRAY_SIZE(clk_src_group4_list),
};
@@ -831,7 +831,7 @@
[4] = &clk_mout_hpll.clk,
};
-struct clksrc_sources clk_src_group5 = {
+static struct clksrc_sources clk_src_group5 = {
.sources = clk_src_group5_list,
.nr_sources = ARRAY_SIZE(clk_src_group5_list),
};
@@ -854,7 +854,7 @@
[2] = &clk_div_hdmi.clk,
};
-struct clksrc_sources clk_src_group6 = {
+static struct clksrc_sources clk_src_group6 = {
.sources = clk_src_group6_list,
.nr_sources = ARRAY_SIZE(clk_src_group6_list),
};
@@ -866,7 +866,7 @@
[3] = &clk_vclk54m,
};
-struct clksrc_sources clk_src_group7 = {
+static struct clksrc_sources clk_src_group7 = {
.sources = clk_src_group7_list,
.nr_sources = ARRAY_SIZE(clk_src_group7_list),
};
@@ -877,7 +877,7 @@
[2] = &clk_fin_epll,
};
-struct clksrc_sources clk_src_mmc0 = {
+static struct clksrc_sources clk_src_mmc0 = {
.sources = clk_src_mmc0_list,
.nr_sources = ARRAY_SIZE(clk_src_mmc0_list),
};
@@ -889,7 +889,7 @@
[3] = &clk_mout_hpll.clk,
};
-struct clksrc_sources clk_src_mmc12 = {
+static struct clksrc_sources clk_src_mmc12 = {
.sources = clk_src_mmc12_list,
.nr_sources = ARRAY_SIZE(clk_src_mmc12_list),
};
@@ -901,7 +901,7 @@
[3] = &clk_mout_hpll.clk,
};
-struct clksrc_sources clk_src_irda_usb = {
+static struct clksrc_sources clk_src_irda_usb = {
.sources = clk_src_irda_usb_list,
.nr_sources = ARRAY_SIZE(clk_src_irda_usb_list),
};
@@ -912,7 +912,7 @@
[2] = &clk_div_mpll.clk,
};
-struct clksrc_sources clk_src_pwi = {
+static struct clksrc_sources clk_src_pwi = {
.sources = clk_src_pwi_list,
.nr_sources = ARRAY_SIZE(clk_src_pwi_list),
};
@@ -923,7 +923,7 @@
[2] = &clk_sclk_audio2.clk,
};
-struct clksrc_sources clk_src_sclk_spdif = {
+static struct clksrc_sources clk_src_sclk_spdif = {
.sources = clk_sclk_spdif_list,
.nr_sources = ARRAY_SIZE(clk_sclk_spdif_list),
};
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index c909573..ff71e2d 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -129,14 +129,6 @@
}
};
-static void s5pc100_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
/*
* s5pc100_map_io
*
@@ -210,10 +202,6 @@
int __init s5pc100_init(void)
{
printk(KERN_INFO "S5PC100: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = s5pc100_idle;
-
return device_register(&s5pc100_dev);
}
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index c841f4d3..afd8db2 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -35,7 +35,7 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-u8 pdma0_peri[] = {
+static u8 pdma0_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
@@ -68,28 +68,15 @@
DMACH_HSI_TX,
};
-struct dma_pl330_platdata s5pc100_pdma0_pdata = {
+static struct dma_pl330_platdata s5pc100_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
.peri_id = pdma0_peri,
};
-struct amba_device s5pc100_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_pdma0_pdata,
- },
- .res = {
- .start = S5PC100_PA_PDMA0,
- .end = S5PC100_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+static AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330,
+ S5PC100_PA_PDMA0, {IRQ_PDMA0}, &s5pc100_pdma0_pdata);
-u8 pdma1_peri[] = {
+static u8 pdma1_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
@@ -122,36 +109,23 @@
DMACH_MSM_REQ3,
};
-struct dma_pl330_platdata s5pc100_pdma1_pdata = {
+static struct dma_pl330_platdata s5pc100_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
.peri_id = pdma1_peri,
};
-struct amba_device s5pc100_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_pdma1_pdata,
- },
- .res = {
- .start = S5PC100_PA_PDMA1,
- .end = S5PC100_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
-};
+static AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330,
+ S5PC100_PA_PDMA1, {IRQ_PDMA1}, &s5pc100_pdma1_pdata);
static int __init s5pc100_dma_init(void)
{
dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
- amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+ amba_device_register(&s5pc100_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
- amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
+ amba_device_register(&s5pc100_pdma1_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5pc100/include/mach/entry-macro.S b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
index b8c242e..bad0700 100644
--- a/arch/arm/mach-s5pc100/include/mach/entry-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/entry-macro.S
@@ -12,14 +12,8 @@
* warranty of any kind, whether express or implied.
*/
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
.endm
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
deleted file mode 100644
index afc96c2..0000000
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/include/mach/system.h
- *
- * Copyright 2009 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * S5PC100 - system implementation
- *
- * Based on mach-s3c6400/include/mach/system.h
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 2cdc42e..82525e3 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -65,6 +65,11 @@
help
Common setup code for SPI GPIO configurations.
+config S5PV210_SETUP_USB_PHY
+ bool
+ help
+ Common setup code for USB PHY controller
+
menu "S5PC110 Machines"
config MACH_AQUILA
@@ -107,6 +112,7 @@
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
select S5PV210_SETUP_FIMC
+ select S5PV210_SETUP_USB_PHY
help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 76a121d..1c4e419 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -39,3 +39,4 @@
obj-$(CONFIG_S5PV210_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
obj-$(CONFIG_S5PV210_SETUP_SPI) += setup-spi.o
+obj-$(CONFIG_S5PV210_SETUP_USB_PHY) += setup-usb-phy.o
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 9c1bcdc..4c9e902 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -142,14 +142,6 @@
}
};
-static void s5pv210_idle(void)
-{
- if (!need_resched())
- cpu_do_idle();
-
- local_irq_enable();
-}
-
void s5pv210_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
@@ -247,10 +239,6 @@
int __init s5pv210_init(void)
{
printk(KERN_INFO "S5PV210: Initializing architecture\n");
-
- /* set idle function */
- pm_idle = s5pv210_idle;
-
return device_register(&s5pv210_dev);
}
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index a6113e0..86ce62f 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -35,7 +35,7 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-u8 pdma0_peri[] = {
+static u8 pdma0_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
@@ -66,28 +66,15 @@
DMACH_SPDIF,
};
-struct dma_pl330_platdata s5pv210_pdma0_pdata = {
+static struct dma_pl330_platdata s5pv210_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
.peri_id = pdma0_peri,
};
-struct amba_device s5pv210_device_pdma0 = {
- .dev = {
- .init_name = "dma-pl330.0",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pv210_pdma0_pdata,
- },
- .res = {
- .start = S5PV210_PA_PDMA0,
- .end = S5PV210_PA_PDMA0 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA0, NO_IRQ},
- .periphid = 0x00041330,
-};
+static AMBA_AHB_DEVICE(s5pv210_pdma0, "dma-pl330.0", 0x00041330,
+ S5PV210_PA_PDMA0, {IRQ_PDMA0}, &s5pv210_pdma0_pdata);
-u8 pdma1_peri[] = {
+static u8 pdma1_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,
DMACH_UART1_RX,
@@ -122,36 +109,23 @@
DMACH_PCM2_TX,
};
-struct dma_pl330_platdata s5pv210_pdma1_pdata = {
+static struct dma_pl330_platdata s5pv210_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
.peri_id = pdma1_peri,
};
-struct amba_device s5pv210_device_pdma1 = {
- .dev = {
- .init_name = "dma-pl330.1",
- .dma_mask = &dma_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pv210_pdma1_pdata,
- },
- .res = {
- .start = S5PV210_PA_PDMA1,
- .end = S5PV210_PA_PDMA1 + SZ_4K,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_PDMA1, NO_IRQ},
- .periphid = 0x00041330,
-};
+static AMBA_AHB_DEVICE(s5pv210_pdma1, "dma-pl330.1", 0x00041330,
+ S5PV210_PA_PDMA1, {IRQ_PDMA1}, &s5pv210_pdma1_pdata);
static int __init s5pv210_dma_init(void)
{
dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask);
- amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+ amba_device_register(&s5pv210_pdma0_device, &iomem_resource);
dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask);
dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask);
- amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
+ amba_device_register(&s5pv210_pdma1_device, &iomem_resource);
return 0;
}
diff --git a/arch/arm/mach-s5pv210/include/mach/entry-macro.S b/arch/arm/mach-s5pv210/include/mach/entry-macro.S
deleted file mode 100644
index bebca1b..0000000
--- a/arch/arm/mach-s5pv210/include/mach/entry-macro.S
+++ /dev/null
@@ -1,17 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/entry-macro.S
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Low-level IRQ helper macros for the Samsung S5PV210
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-sys.h b/arch/arm/mach-s5pv210/include/mach/regs-sys.h
index 26691d3..cccb1ed 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-sys.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-sys.h
@@ -13,7 +13,3 @@
#define S5PV210_USB_PHY_CON (S3C_VA_SYS + 0xE80C)
#define S5PV210_USB_PHY0_EN (1 << 0)
#define S5PV210_USB_PHY1_EN (1 << 1)
-
-/* compatibility defines for s3c-hsotg driver */
-#define S3C64XX_OTHERS S5PV210_USB_PHY_CON
-#define S3C64XX_OTHERS_USBMASK S5PV210_USB_PHY0_EN
diff --git a/arch/arm/mach-s5pv210/include/mach/system.h b/arch/arm/mach-s5pv210/include/mach/system.h
deleted file mode 100644
index bf288ce..0000000
--- a/arch/arm/mach-s5pv210/include/mach/system.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/system.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - system support header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H __FILE__
-
-static void arch_idle(void)
-{
- /* nothing here yet */
-}
-
-#endif /* __ASM_ARCH_SYSTEM_H */
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index ff91526..2cf5ed7 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -844,7 +844,7 @@
},
};
-struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
+static struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
.isp_info = goni_camera_sensors,
.num_clients = ARRAY_SIZE(goni_camera_sensors),
};
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index dff9ea7..0933c8e 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -140,7 +140,7 @@
.dev_addr = { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 },
};
-struct platform_device smdkv210_dm9000 = {
+static struct platform_device smdkv210_dm9000 = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(smdkv210_dm9000_resources),
diff --git a/arch/arm/mach-s5pv210/setup-usb-phy.c b/arch/arm/mach-s5pv210/setup-usb-phy.c
new file mode 100644
index 0000000..be39cf4
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-usb-phy.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundationr
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <mach/map.h>
+#include <mach/regs-sys.h>
+#include <plat/cpu.h>
+#include <plat/regs-usb-hsotg-phy.h>
+#include <plat/usb-phy.h>
+
+static int s5pv210_usb_otgphy_init(struct platform_device *pdev)
+{
+ struct clk *xusbxti;
+ u32 phyclk;
+
+ writel(readl(S5PV210_USB_PHY_CON) | S5PV210_USB_PHY0_EN,
+ S5PV210_USB_PHY_CON);
+
+ /* set clock frequency for PLL */
+ phyclk = readl(S3C_PHYCLK) & ~S3C_PHYCLK_CLKSEL_MASK;
+
+ xusbxti = clk_get(&pdev->dev, "xusbxti");
+ if (xusbxti && !IS_ERR(xusbxti)) {
+ switch (clk_get_rate(xusbxti)) {
+ case 12 * MHZ:
+ phyclk |= S3C_PHYCLK_CLKSEL_12M;
+ break;
+ case 24 * MHZ:
+ phyclk |= S3C_PHYCLK_CLKSEL_24M;
+ break;
+ default:
+ case 48 * MHZ:
+ /* default reference clock */
+ break;
+ }
+ clk_put(xusbxti);
+ }
+
+ /* TODO: select external clock/oscillator */
+ writel(phyclk | S3C_PHYCLK_CLK_FORCE, S3C_PHYCLK);
+
+ /* set to normal OTG PHY */
+ writel((readl(S3C_PHYPWR) & ~S3C_PHYPWR_NORMAL_MASK), S3C_PHYPWR);
+ mdelay(1);
+
+ /* reset OTG PHY and Link */
+ writel(S3C_RSTCON_PHY | S3C_RSTCON_HCLK | S3C_RSTCON_PHYCLK,
+ S3C_RSTCON);
+ udelay(20); /* at-least 10uS */
+ writel(0, S3C_RSTCON);
+
+ return 0;
+}
+
+static int s5pv210_usb_otgphy_exit(struct platform_device *pdev)
+{
+ writel((readl(S3C_PHYPWR) | S3C_PHYPWR_ANALOG_POWERDOWN |
+ S3C_PHYPWR_OTG_DISABLE), S3C_PHYPWR);
+
+ writel(readl(S5PV210_USB_PHY_CON) & ~S5PV210_USB_PHY0_EN,
+ S5PV210_USB_PHY_CON);
+
+ return 0;
+}
+
+int s5p_usb_phy_init(struct platform_device *pdev, int type)
+{
+ if (type == S5P_USB_PHY_DEVICE)
+ return s5pv210_usb_otgphy_init(pdev);
+
+ return -EINVAL;
+}
+
+int s5p_usb_phy_exit(struct platform_device *pdev, int type)
+{
+ if (type == S5P_USB_PHY_DEVICE)
+ return s5pv210_usb_otgphy_exit(pdev);
+
+ return -EINVAL;
+}
diff --git a/arch/arm/mach-sa1100/include/mach/entry-macro.S b/arch/arm/mach-sa1100/include/mach/entry-macro.S
index 6aa13c4..8cf7630 100644
--- a/arch/arm/mach-sa1100/include/mach/entry-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/entry-macro.S
@@ -8,17 +8,11 @@
* warranty of any kind, whether express or implied.
*/
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
mov \base, #0xfa000000 @ ICIP = 0xfa050000
add \base, \base, #0x00050000
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base] @ get irqs
ldr \irqnr, [\base, #4] @ ICMR = 0xfa050004
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
deleted file mode 100644
index e17b208..0000000
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ /dev/null
@@ -1,9 +0,0 @@
-/*
- * arch/arm/mach-sa1100/include/mach/system.h
- *
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index a851c25..6a2a7f2 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -149,10 +149,16 @@
.init = shark_timer_init,
};
+static void shark_init_early(void)
+{
+ disable_hlt();
+}
+
MACHINE_START(SHARK, "Shark")
/* Maintainer: Alexander Schulz */
.atag_offset = 0x3000,
.map_io = shark_map_io,
+ .init_early = shark_init_early,
.init_irq = shark_init_irq,
.timer = &shark_timer,
.dma_zone_size = SZ_4M,
diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S
index 0bb6cc6..5901b09 100644
--- a/arch/arm/mach-shark/include/mach/entry-macro.S
+++ b/arch/arm/mach-shark/include/mach/entry-macro.S
@@ -7,16 +7,10 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
mov \base, #0xe0000000
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \irqstat, #0x0C
diff --git a/arch/arm/mach-shark/include/mach/system.h b/arch/arm/mach-shark/include/mach/system.h
deleted file mode 100644
index 1b2f2c5..0000000
--- a/arch/arm/mach-shark/include/mach/system.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-shark/include/mach/system.h
- *
- * by Alexander Schulz
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
deleted file mode 100644
index 2a57b29..0000000
--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2010 Paul Mundt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-shmobile/include/mach/system.h b/arch/arm/mach-shmobile/include/mach/system.h
index 956ac18..3bbcb3f 100644
--- a/arch/arm/mach-shmobile/include/mach/system.h
+++ b/arch/arm/mach-shmobile/include/mach/system.h
@@ -1,11 +1,6 @@
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
static inline void arch_reset(char mode, const char *cmd)
{
soft_restart(0);
diff --git a/arch/arm/mach-spear3xx/include/mach/entry-macro.S b/arch/arm/mach-spear3xx/include/mach/entry-macro.S
deleted file mode 100644
index de3bb41..0000000
--- a/arch/arm/mach-spear3xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-spear3xx/include/mach/system.h b/arch/arm/mach-spear3xx/include/mach/system.h
deleted file mode 100644
index 92cee63..0000000
--- a/arch/arm/mach-spear3xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/system.h
- *
- * SPEAr3xx Machine family specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <plat/system.h>
-
-#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index a5e46b4..9da50e281 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -430,18 +430,8 @@
.irq_base = SPEAR300_GPIO1_INT_BASE,
};
-struct amba_device spear300_gpio1_device = {
- .dev = {
- .init_name = "gpio1",
- .platform_data = &gpio1_plat_data,
- },
- .res = {
- .start = SPEAR300_GPIO_BASE,
- .end = SPEAR300_GPIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {SPEAR300_VIRQ_GPIO1, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE,
+ {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data);
/* spear300 routines */
void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs,
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 10af45d..b1733c3 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -28,31 +28,12 @@
.irq_base = SPEAR3XX_GPIO_INT_BASE,
};
-struct amba_device spear3xx_gpio_device = {
- .dev = {
- .init_name = "gpio",
- .platform_data = &gpio_plat_data,
- },
- .res = {
- .start = SPEAR3XX_ICM3_GPIO_BASE,
- .end = SPEAR3XX_ICM3_GPIO_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {SPEAR3XX_IRQ_BASIC_GPIO, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE,
+ {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data);
/* uart device registration */
-struct amba_device spear3xx_uart_device = {
- .dev = {
- .init_name = "uart",
- },
- .res = {
- .start = SPEAR3XX_ICM1_UART_BASE,
- .end = SPEAR3XX_ICM1_UART_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {SPEAR3XX_IRQ_UART, NO_IRQ},
-};
+AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE,
+ {SPEAR3XX_IRQ_UART}, NULL);
/* Do spear3xx familiy common initialization part here */
void __init spear3xx_init(void)
diff --git a/arch/arm/mach-spear6xx/include/mach/entry-macro.S b/arch/arm/mach-spear6xx/include/mach/entry-macro.S
deleted file mode 100644
index d490a91..0000000
--- a/arch/arm/mach-spear6xx/include/mach/entry-macro.S
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-spear6xx/include/mach/system.h b/arch/arm/mach-spear6xx/include/mach/system.h
deleted file mode 100644
index 0b1d2be..0000000
--- a/arch/arm/mach-spear6xx/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/system.h
- *
- * SPEAr6xx Machine family specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-
-#include <plat/system.h>
-
-#endif /* __MACH_SYSTEM_H */
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index e0f6628..b997b1b 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -34,7 +34,7 @@
.end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_UART_0, NO_IRQ},
+ .irq = {IRQ_UART_0},
}, {
.dev = {
.init_name = "uart1",
@@ -44,7 +44,7 @@
.end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_UART_1, NO_IRQ},
+ .irq = {IRQ_UART_1},
}
};
@@ -73,7 +73,7 @@
.end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_LOCAL_GPIO, NO_IRQ},
+ .irq = {IRQ_LOCAL_GPIO},
}, {
.dev = {
.init_name = "gpio1",
@@ -84,7 +84,7 @@
.end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_BASIC_GPIO, NO_IRQ},
+ .irq = {IRQ_BASIC_GPIO},
}, {
.dev = {
.init_name = "gpio2",
@@ -95,7 +95,7 @@
.end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
- .irq = {IRQ_APPL_GPIO, NO_IRQ},
+ .irq = {IRQ_APPL_GPIO},
}
};
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index e120ff5..7c77a53 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -7,15 +7,21 @@
obj-y += timer.o
obj-y += pinmux.o
obj-y += fuse.o
+obj-y += pmc.o
+obj-y += flowctrl.o
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
+obj-$(CONFIG_CPU_IDLE) += sleep.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += powergate.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_clocks.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra2_emc.o
obj-$(CONFIG_ARCH_TEGRA_2x_SOC) += pinmux-tegra20-tables.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += pinmux-tegra30-tables.o
obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += board-dt-tegra30.o
+obj-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30_clocks.o
obj-$(CONFIG_SMP) += platsmp.o localtimer.o headsmp.o
+obj-$(CONFIG_SMP) += reset.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o
+obj-$(CONFIG_TEGRA_SYSTEM_DMA) += dma.o apbio.o
obj-$(CONFIG_CPU_FREQ) += cpu-tegra.o
obj-$(CONFIG_TEGRA_PCI) += pcie.o
obj-$(CONFIG_USB_SUPPORT) += usb_phy.o
diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c
new file mode 100644
index 0000000..e75451e
--- /dev/null
+++ b/arch/arm/mach-tegra/apbio.c
@@ -0,0 +1,145 @@
+/*
+ * Copyright (C) 2010 NVIDIA Corporation.
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/sched.h>
+#include <linux/mutex.h>
+
+#include <mach/dma.h>
+#include <mach/iomap.h>
+
+#include "apbio.h"
+
+static DEFINE_MUTEX(tegra_apb_dma_lock);
+
+static struct tegra_dma_channel *tegra_apb_dma;
+static u32 *tegra_apb_bb;
+static dma_addr_t tegra_apb_bb_phys;
+static DECLARE_COMPLETION(tegra_apb_wait);
+
+bool tegra_apb_init(void)
+{
+ struct tegra_dma_channel *ch;
+
+ mutex_lock(&tegra_apb_dma_lock);
+
+ /* Check to see if we raced to setup */
+ if (tegra_apb_dma)
+ goto out;
+
+ ch = tegra_dma_allocate_channel(TEGRA_DMA_MODE_ONESHOT |
+ TEGRA_DMA_SHARED);
+
+ if (!ch)
+ goto out_fail;
+
+ tegra_apb_bb = dma_alloc_coherent(NULL, sizeof(u32),
+ &tegra_apb_bb_phys, GFP_KERNEL);
+ if (!tegra_apb_bb) {
+ pr_err("%s: can not allocate bounce buffer\n", __func__);
+ tegra_dma_free_channel(ch);
+ goto out_fail;
+ }
+
+ tegra_apb_dma = ch;
+out:
+ mutex_unlock(&tegra_apb_dma_lock);
+ return true;
+
+out_fail:
+ mutex_unlock(&tegra_apb_dma_lock);
+ return false;
+}
+
+static void apb_dma_complete(struct tegra_dma_req *req)
+{
+ complete(&tegra_apb_wait);
+}
+
+u32 tegra_apb_readl(unsigned long offset)
+{
+ struct tegra_dma_req req;
+ int ret;
+
+ if (!tegra_apb_dma && !tegra_apb_init())
+ return readl(IO_TO_VIRT(offset));
+
+ mutex_lock(&tegra_apb_dma_lock);
+ req.complete = apb_dma_complete;
+ req.to_memory = 1;
+ req.dest_addr = tegra_apb_bb_phys;
+ req.dest_bus_width = 32;
+ req.dest_wrap = 1;
+ req.source_addr = offset;
+ req.source_bus_width = 32;
+ req.source_wrap = 4;
+ req.req_sel = TEGRA_DMA_REQ_SEL_CNTR;
+ req.size = 4;
+
+ INIT_COMPLETION(tegra_apb_wait);
+
+ tegra_dma_enqueue_req(tegra_apb_dma, &req);
+
+ ret = wait_for_completion_timeout(&tegra_apb_wait,
+ msecs_to_jiffies(50));
+
+ if (WARN(ret == 0, "apb read dma timed out")) {
+ tegra_dma_dequeue_req(tegra_apb_dma, &req);
+ *(u32 *)tegra_apb_bb = 0;
+ }
+
+ mutex_unlock(&tegra_apb_dma_lock);
+ return *((u32 *)tegra_apb_bb);
+}
+
+void tegra_apb_writel(u32 value, unsigned long offset)
+{
+ struct tegra_dma_req req;
+ int ret;
+
+ if (!tegra_apb_dma && !tegra_apb_init()) {
+ writel(value, IO_TO_VIRT(offset));
+ return;
+ }
+
+ mutex_lock(&tegra_apb_dma_lock);
+ *((u32 *)tegra_apb_bb) = value;
+ req.complete = apb_dma_complete;
+ req.to_memory = 0;
+ req.dest_addr = offset;
+ req.dest_wrap = 4;
+ req.dest_bus_width = 32;
+ req.source_addr = tegra_apb_bb_phys;
+ req.source_bus_width = 32;
+ req.source_wrap = 1;
+ req.req_sel = TEGRA_DMA_REQ_SEL_CNTR;
+ req.size = 4;
+
+ INIT_COMPLETION(tegra_apb_wait);
+
+ tegra_dma_enqueue_req(tegra_apb_dma, &req);
+
+ ret = wait_for_completion_timeout(&tegra_apb_wait,
+ msecs_to_jiffies(50));
+
+ if (WARN(ret == 0, "apb write dma timed out"))
+ tegra_dma_dequeue_req(tegra_apb_dma, &req);
+
+ mutex_unlock(&tegra_apb_dma_lock);
+}
diff --git a/arch/arm/mach-tegra/apbio.h b/arch/arm/mach-tegra/apbio.h
new file mode 100644
index 0000000..8b49e8c
--- /dev/null
+++ b/arch/arm/mach-tegra/apbio.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2010 NVIDIA Corporation.
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_APBIO_H
+#define __MACH_TEGRA_APBIO_H
+
+#ifdef CONFIG_TEGRA_SYSTEM_DMA
+
+u32 tegra_apb_readl(unsigned long offset);
+void tegra_apb_writel(u32 value, unsigned long offset);
+
+#else
+#include <asm/io.h>
+#include <mach/io.h>
+
+static inline u32 tegra_apb_readl(unsigned long offset)
+{
+ return readl(IO_TO_VIRT(offset));
+}
+
+static inline void tegra_apb_writel(u32 value, unsigned long offset)
+{
+ writel(value, IO_TO_VIRT(offset));
+}
+#endif
+
+#endif
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index 3c197e2..11f7abd 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -34,16 +34,38 @@
#include <asm/hardware/gic.h>
#include "board.h"
+#include "clock.h"
static struct of_device_id tegra_dt_match_table[] __initdata = {
{ .compatible = "simple-bus", },
{}
};
+struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000200, "sdhci-tegra.1", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000400, "sdhci-tegra.2", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000600, "sdhci-tegra.3", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C000, "tegra-i2c.0", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C400, "tegra-i2c.1", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C500, "tegra-i2c.2", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000C700, "tegra-i2c.3", NULL),
+ OF_DEV_AUXDATA("nvidia,tegra20-i2c", 0x7000D000, "tegra-i2c.4", NULL),
+ {}
+};
+
+static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
+ /* name parent rate enabled */
+ { "uarta", "pll_p", 408000000, true },
+ { NULL, NULL, 0, 0},
+};
+
static void __init tegra30_dt_init(void)
{
+ tegra_clk_init_from_table(tegra_dt_clk_init_table);
+
of_platform_populate(NULL, tegra_dt_match_table,
- NULL, NULL);
+ tegra30_auxdata_lookup, NULL);
}
static const char *tegra30_dt_board_compat[] = {
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
index 21d1285..976edfb0 100644
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ b/arch/arm/mach-tegra/board-harmony-power.c
@@ -18,18 +18,13 @@
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
-#include <linux/io.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/tps6586x.h>
-#include <mach/iomap.h>
#include <mach/irqs.h>
#include "board-harmony.h"
-#define PMC_CTRL 0x0
-#define PMC_CTRL_INTR_LOW (1 << 17)
-
static struct regulator_consumer_supply tps658621_ldo0_supply[] = {
REGULATOR_SUPPLY("pex_clk", NULL),
};
@@ -114,16 +109,6 @@
int __init harmony_regulator_init(void)
{
- void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
- u32 pmc_ctrl;
-
- /*
- * Configure the power management controller to trigger PMU
- * interrupts when low
- */
- pmc_ctrl = readl(pmc + PMC_CTRL);
- writel(pmc_ctrl | PMC_CTRL_INTR_LOW, pmc + PMC_CTRL);
-
i2c_register_board_info(3, harmony_regulators, 1);
return 0;
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 789bdc9..c00aadb 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -101,7 +101,6 @@
static struct i2c_board_info __initdata wm8903_board_info = {
I2C_BOARD_INFO("wm8903", 0x1a),
.platform_data = &harmony_wm8903_pdata,
- .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ),
};
static void __init harmony_i2c_init(void)
@@ -111,6 +110,7 @@
platform_device_register(&tegra_i2c_device3);
platform_device_register(&tegra_i2c_device4);
+ wm8903_board_info.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
i2c_register_board_info(0, &wm8903_board_info, 1);
}
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index ebac65f..d669847 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -159,7 +159,6 @@
static struct i2c_board_info __initdata isl29018_device = {
I2C_BOARD_INFO("isl29018", 0x44),
- .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_ISL29018_IRQ),
};
static struct i2c_board_info __initdata adt7461_device = {
@@ -183,7 +182,6 @@
static struct i2c_board_info __initdata wm8903_device = {
I2C_BOARD_INFO("wm8903", 0x1a),
.platform_data = &wm8903_pdata,
- .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ),
};
static int seaboard_ehci_init(void)
@@ -214,7 +212,10 @@
gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018");
gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ);
+ isl29018_device.irq = gpio_to_irq(TEGRA_GPIO_ISL29018_IRQ);
i2c_register_board_info(0, &isl29018_device, 1);
+
+ wm8903_device.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
i2c_register_board_info(0, &wm8903_device, 1);
i2c_register_board_info(3, &adt7461_device, 1);
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index 8337068..8dad8d1 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -399,6 +399,28 @@
}
EXPORT_SYMBOL(tegra_periph_reset_assert);
+/* Several extended clock configuration bits (e.g., clock routing, clock
+ * phase control) are included in PLL and peripheral clock source
+ * registers. */
+int tegra_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+{
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&c->spinlock, flags);
+
+ if (!c->ops || !c->ops->clk_cfg_ex) {
+ ret = -ENOSYS;
+ goto out;
+ }
+ ret = c->ops->clk_cfg_ex(c, p, setting);
+
+out:
+ spin_unlock_irqrestore(&c->spinlock, flags);
+
+ return ret;
+}
+
#ifdef CONFIG_DEBUG_FS
static int __clk_lock_all_spinlocks(void)
diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h
index 5c44106..bc30065 100644
--- a/arch/arm/mach-tegra/clock.h
+++ b/arch/arm/mach-tegra/clock.h
@@ -24,6 +24,8 @@
#include <linux/list.h>
#include <linux/spinlock.h>
+#include <mach/clk.h>
+
#define DIV_BUS (1 << 0)
#define DIV_U71 (1 << 1)
#define DIV_U71_FIXED (1 << 2)
@@ -39,7 +41,16 @@
#define PERIPH_MANUAL_RESET (1 << 12)
#define PLL_ALT_MISC_REG (1 << 13)
#define PLLU (1 << 14)
+#define PLLX (1 << 15)
+#define MUX_PWM (1 << 16)
+#define MUX8 (1 << 17)
+#define DIV_U71_UART (1 << 18)
+#define MUX_CLK_OUT (1 << 19)
+#define PLLM (1 << 20)
+#define DIV_U71_INT (1 << 21)
+#define DIV_U71_IDLE (1 << 22)
#define ENABLE_ON_INIT (1 << 28)
+#define PERIPH_ON_APB (1 << 29)
struct clk;
@@ -65,6 +76,8 @@
int (*set_rate)(struct clk *, unsigned long);
long (*round_rate)(struct clk *, unsigned long);
void (*reset)(struct clk *, bool);
+ int (*clk_cfg_ex)(struct clk *,
+ enum tegra_clk_ex_param, u32);
};
enum clk_state {
@@ -114,6 +127,7 @@
unsigned long vco_max;
const struct clk_pll_freq_table *freq_table;
int lock_delay;
+ unsigned long fixed_rate;
} pll;
struct {
u32 sel;
@@ -146,6 +160,7 @@
};
void tegra2_init_clocks(void);
+void tegra30_init_clocks(void);
void clk_init(struct clk *clk);
struct clk *tegra_get_clock_by_name(const char *name);
int clk_reparent(struct clk *c, struct clk *parent);
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index a2eb901..68815ce 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -27,11 +27,29 @@
#include <asm/hardware/gic.h>
#include <mach/iomap.h>
-#include <mach/system.h>
+#include <mach/powergate.h>
#include "board.h"
#include "clock.h"
#include "fuse.h"
+#include "pmc.h"
+
+/*
+ * Storage for debug-macro.S's state.
+ *
+ * This must be in .data not .bss so that it gets initialized each time the
+ * kernel is loaded. The data is declared here rather than debug-macro.S so
+ * that multiple inclusions of debug-macro.S point at the same data.
+ */
+#define TEGRA_DEBUG_UART_OFFSET (TEGRA_DEBUG_UART_BASE & 0xFFFF)
+u32 tegra_uart_config[3] = {
+ /* Debug UART initialization required */
+ 1,
+ /* Debug UART physical address */
+ (u32)(IO_APB_PHYS + TEGRA_DEBUG_UART_OFFSET),
+ /* Debug UART virtual address */
+ (u32)(IO_APB_VIRT + TEGRA_DEBUG_UART_OFFSET),
+};
#ifdef CONFIG_OF
static const struct of_device_id tegra_dt_irq_match[] __initconst = {
@@ -96,15 +114,23 @@
#ifdef CONFIG_ARCH_TEGRA_2x_SOC
void __init tegra20_init_early(void)
{
+ disable_hlt(); /* idle WFI usage needs to be confirmed */
+
tegra_init_fuse();
tegra2_init_clocks();
tegra_clk_init_from_table(tegra20_clk_init_table);
tegra_init_cache(0x331, 0x441);
+ tegra_pmc_init();
+ tegra_powergate_init();
}
#endif
#ifdef CONFIG_ARCH_TEGRA_3x_SOC
void __init tegra30_init_early(void)
{
+ tegra_init_fuse();
+ tegra30_init_clocks();
tegra_init_cache(0x441, 0x551);
+ tegra_pmc_init();
+ tegra_powergate_init();
}
#endif
diff --git a/arch/arm/mach-tegra/cpuidle.c b/arch/arm/mach-tegra/cpuidle.c
new file mode 100644
index 0000000..d83a8c0
--- /dev/null
+++ b/arch/arm/mach-tegra/cpuidle.c
@@ -0,0 +1,107 @@
+/*
+ * arch/arm/mach-tegra/cpuidle.c
+ *
+ * CPU idle driver for Tegra CPUs
+ *
+ * Copyright (c) 2010-2012, NVIDIA Corporation.
+ * Copyright (c) 2011 Google, Inc.
+ * Author: Colin Cross <ccross@android.com>
+ * Gary King <gking@nvidia.com>
+ *
+ * Rework for 3.3 by Peter De Schrijver <pdeschrijver@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/cpu.h>
+#include <linux/cpuidle.h>
+#include <linux/hrtimer.h>
+
+#include <mach/iomap.h>
+
+extern void tegra_cpu_wfi(void);
+
+static int tegra_idle_enter_lp3(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int index);
+
+struct cpuidle_driver tegra_idle_driver = {
+ .name = "tegra_idle",
+ .owner = THIS_MODULE,
+ .state_count = 1,
+ .states = {
+ [0] = {
+ .enter = tegra_idle_enter_lp3,
+ .exit_latency = 10,
+ .target_residency = 10,
+ .power_usage = 600,
+ .flags = CPUIDLE_FLAG_TIME_VALID,
+ .name = "LP3",
+ .desc = "CPU flow-controlled",
+ },
+ },
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, tegra_idle_device);
+
+static int tegra_idle_enter_lp3(struct cpuidle_device *dev,
+ struct cpuidle_driver *drv, int index)
+{
+ ktime_t enter, exit;
+ s64 us;
+
+ local_irq_disable();
+ local_fiq_disable();
+
+ enter = ktime_get();
+
+ tegra_cpu_wfi();
+
+ exit = ktime_sub(ktime_get(), enter);
+ us = ktime_to_us(exit);
+
+ local_fiq_enable();
+ local_irq_enable();
+
+ dev->last_residency = us;
+
+ return index;
+}
+
+static int __init tegra_cpuidle_init(void)
+{
+ int ret;
+ unsigned int cpu;
+ struct cpuidle_device *dev;
+ struct cpuidle_driver *drv = &tegra_idle_driver;
+
+ ret = cpuidle_register_driver(&tegra_idle_driver);
+ if (ret) {
+ pr_err("CPUidle driver registration failed\n");
+ return ret;
+ }
+
+ for_each_possible_cpu(cpu) {
+ dev = &per_cpu(tegra_idle_device, cpu);
+ dev->cpu = cpu;
+
+ dev->state_count = drv->state_count;
+ ret = cpuidle_register_device(dev);
+ if (ret) {
+ pr_err("CPU%u: CPUidle device registration failed\n",
+ cpu);
+ return ret;
+ }
+ }
+ return 0;
+}
+device_initcall(tegra_cpuidle_init);
diff --git a/arch/arm/mach-tegra/dma.c b/arch/arm/mach-tegra/dma.c
index c0cf967..abea4f6 100644
--- a/arch/arm/mach-tegra/dma.c
+++ b/arch/arm/mach-tegra/dma.c
@@ -33,6 +33,8 @@
#include <mach/iomap.h>
#include <mach/suspend.h>
+#include "apbio.h"
+
#define APB_DMA_GEN 0x000
#define GEN_ENABLE (1<<31)
@@ -50,8 +52,6 @@
#define CSR_ONCE (1<<27)
#define CSR_FLOW (1<<21)
#define CSR_REQ_SEL_SHIFT 16
-#define CSR_REQ_SEL_MASK (0x1F<<CSR_REQ_SEL_SHIFT)
-#define CSR_REQ_SEL_INVALID (31<<CSR_REQ_SEL_SHIFT)
#define CSR_WCOUNT_SHIFT 2
#define CSR_WCOUNT_MASK 0xFFFC
@@ -133,6 +133,7 @@
static bool tegra_dma_initialized;
static DEFINE_MUTEX(tegra_dma_lock);
+static DEFINE_SPINLOCK(enable_lock);
static DECLARE_BITMAP(channel_usage, NV_DMA_MAX_CHANNELS);
static struct tegra_dma_channel dma_channels[NV_DMA_MAX_CHANNELS];
@@ -180,36 +181,94 @@
static int tegra_dma_cancel(struct tegra_dma_channel *ch)
{
- u32 csr;
unsigned long irq_flags;
spin_lock_irqsave(&ch->lock, irq_flags);
while (!list_empty(&ch->list))
list_del(ch->list.next);
- csr = readl(ch->addr + APB_DMA_CHAN_CSR);
- csr &= ~CSR_REQ_SEL_MASK;
- csr |= CSR_REQ_SEL_INVALID;
- writel(csr, ch->addr + APB_DMA_CHAN_CSR);
-
tegra_dma_stop(ch);
spin_unlock_irqrestore(&ch->lock, irq_flags);
return 0;
}
+static unsigned int get_channel_status(struct tegra_dma_channel *ch,
+ struct tegra_dma_req *req, bool is_stop_dma)
+{
+ void __iomem *addr = IO_ADDRESS(TEGRA_APB_DMA_BASE);
+ unsigned int status;
+
+ if (is_stop_dma) {
+ /*
+ * STOP the DMA and get the transfer count.
+ * Getting the transfer count is tricky.
+ * - Globally disable DMA on all channels
+ * - Read the channel's status register to know the number
+ * of pending bytes to be transfered.
+ * - Stop the dma channel
+ * - Globally re-enable DMA to resume other transfers
+ */
+ spin_lock(&enable_lock);
+ writel(0, addr + APB_DMA_GEN);
+ udelay(20);
+ status = readl(ch->addr + APB_DMA_CHAN_STA);
+ tegra_dma_stop(ch);
+ writel(GEN_ENABLE, addr + APB_DMA_GEN);
+ spin_unlock(&enable_lock);
+ if (status & STA_ISE_EOC) {
+ pr_err("Got Dma Int here clearing");
+ writel(status, ch->addr + APB_DMA_CHAN_STA);
+ }
+ req->status = TEGRA_DMA_REQ_ERROR_ABORTED;
+ } else {
+ status = readl(ch->addr + APB_DMA_CHAN_STA);
+ }
+ return status;
+}
+
+/* should be called with the channel lock held */
+static unsigned int dma_active_count(struct tegra_dma_channel *ch,
+ struct tegra_dma_req *req, unsigned int status)
+{
+ unsigned int to_transfer;
+ unsigned int req_transfer_count;
+ unsigned int bytes_transferred;
+
+ to_transfer = ((status & STA_COUNT_MASK) >> STA_COUNT_SHIFT) + 1;
+ req_transfer_count = ch->req_transfer_count + 1;
+ bytes_transferred = req_transfer_count;
+ if (status & STA_BUSY)
+ bytes_transferred -= to_transfer;
+ /*
+ * In continuous transfer mode, DMA only tracks the count of the
+ * half DMA buffer. So, if the DMA already finished half the DMA
+ * then add the half buffer to the completed count.
+ */
+ if (ch->mode & TEGRA_DMA_MODE_CONTINOUS) {
+ if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL)
+ bytes_transferred += req_transfer_count;
+ if (status & STA_ISE_EOC)
+ bytes_transferred += req_transfer_count;
+ }
+ bytes_transferred *= 4;
+ return bytes_transferred;
+}
+
int tegra_dma_dequeue_req(struct tegra_dma_channel *ch,
struct tegra_dma_req *_req)
{
- unsigned int csr;
unsigned int status;
struct tegra_dma_req *req = NULL;
int found = 0;
unsigned long irq_flags;
- int to_transfer;
- int req_transfer_count;
+ int stop = 0;
spin_lock_irqsave(&ch->lock, irq_flags);
+
+ if (list_entry(ch->list.next, struct tegra_dma_req, node) == _req)
+ stop = 1;
+
list_for_each_entry(req, &ch->list, node) {
if (req == _req) {
list_del(&req->node);
@@ -222,47 +281,12 @@
return 0;
}
- /* STOP the DMA and get the transfer count.
- * Getting the transfer count is tricky.
- * - Change the source selector to invalid to stop the DMA from
- * FIFO to memory.
- * - Read the status register to know the number of pending
- * bytes to be transferred.
- * - Finally stop or program the DMA to the next buffer in the
- * list.
- */
- csr = readl(ch->addr + APB_DMA_CHAN_CSR);
- csr &= ~CSR_REQ_SEL_MASK;
- csr |= CSR_REQ_SEL_INVALID;
- writel(csr, ch->addr + APB_DMA_CHAN_CSR);
+ if (!stop)
+ goto skip_stop_dma;
- /* Get the transfer count */
- status = readl(ch->addr + APB_DMA_CHAN_STA);
- to_transfer = (status & STA_COUNT_MASK) >> STA_COUNT_SHIFT;
- req_transfer_count = ch->req_transfer_count;
- req_transfer_count += 1;
- to_transfer += 1;
+ status = get_channel_status(ch, req, true);
+ req->bytes_transferred = dma_active_count(ch, req, status);
- req->bytes_transferred = req_transfer_count;
-
- if (status & STA_BUSY)
- req->bytes_transferred -= to_transfer;
-
- /* In continuous transfer mode, DMA only tracks the count of the
- * half DMA buffer. So, if the DMA already finished half the DMA
- * then add the half buffer to the completed count.
- *
- * FIXME: There can be a race here. What if the req to
- * dequue happens at the same time as the DMA just moved to
- * the new buffer and SW didn't yet received the interrupt?
- */
- if (ch->mode & TEGRA_DMA_MODE_CONTINOUS)
- if (req->buffer_status == TEGRA_DMA_REQ_BUF_STATUS_HALF_FULL)
- req->bytes_transferred += req_transfer_count;
-
- req->bytes_transferred *= 4;
-
- tegra_dma_stop(ch);
if (!list_empty(&ch->list)) {
/* if the list is not empty, queue the next request */
struct tegra_dma_req *next_req;
@@ -270,6 +294,8 @@
typeof(*next_req), node);
tegra_dma_update_hw(ch, next_req);
}
+
+skip_stop_dma:
req->status = -TEGRA_DMA_REQ_ERROR_ABORTED;
spin_unlock_irqrestore(&ch->lock, irq_flags);
@@ -357,7 +383,7 @@
int channel;
struct tegra_dma_channel *ch = NULL;
- if (WARN_ON(!tegra_dma_initialized))
+ if (!tegra_dma_initialized)
return NULL;
mutex_lock(&tegra_dma_lock);
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
new file mode 100644
index 0000000..fef66a7
--- /dev/null
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -0,0 +1,62 @@
+/*
+ * arch/arm/mach-tegra/flowctrl.c
+ *
+ * functions and macros to control the flowcontroller
+ *
+ * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+
+#include <mach/iomap.h>
+
+#include "flowctrl.h"
+
+u8 flowctrl_offset_halt_cpu[] = {
+ FLOW_CTRL_HALT_CPU0_EVENTS,
+ FLOW_CTRL_HALT_CPU1_EVENTS,
+ FLOW_CTRL_HALT_CPU1_EVENTS + 8,
+ FLOW_CTRL_HALT_CPU1_EVENTS + 16,
+};
+
+u8 flowctrl_offset_cpu_csr[] = {
+ FLOW_CTRL_CPU0_CSR,
+ FLOW_CTRL_CPU1_CSR,
+ FLOW_CTRL_CPU1_CSR + 8,
+ FLOW_CTRL_CPU1_CSR + 16,
+};
+
+static void flowctrl_update(u8 offset, u32 value)
+{
+ void __iomem *addr = IO_ADDRESS(TEGRA_FLOW_CTRL_BASE) + offset;
+
+ writel(value, addr);
+
+ /* ensure the update has reached the flow controller */
+ wmb();
+ readl_relaxed(addr);
+}
+
+void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value)
+{
+ return flowctrl_update(flowctrl_offset_halt_cpu[cpuid], value);
+}
+
+void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value)
+{
+ return flowctrl_update(flowctrl_offset_cpu_csr[cpuid], value);
+}
diff --git a/arch/arm/mach-tegra/flowctrl.h b/arch/arm/mach-tegra/flowctrl.h
new file mode 100644
index 0000000..1942817
--- /dev/null
+++ b/arch/arm/mach-tegra/flowctrl.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/mach-tegra/flowctrl.h
+ *
+ * functions and macros to control the flowcontroller
+ *
+ * Copyright (c) 2010-2012, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MACH_TEGRA_FLOWCTRL_H
+#define __MACH_TEGRA_FLOWCTRL_H
+
+#define FLOW_CTRL_HALT_CPU0_EVENTS 0x0
+#define FLOW_CTRL_WAITEVENT (2 << 29)
+#define FLOW_CTRL_WAIT_FOR_INTERRUPT (4 << 29)
+#define FLOW_CTRL_JTAG_RESUME (1 << 28)
+#define FLOW_CTRL_HALT_CPU_IRQ (1 << 10)
+#define FLOW_CTRL_HALT_CPU_FIQ (1 << 8)
+#define FLOW_CTRL_CPU0_CSR 0x8
+#define FLOW_CTRL_CSR_INTR_FLAG (1 << 15)
+#define FLOW_CTRL_CSR_EVENT_FLAG (1 << 14)
+#define FLOW_CTRL_CSR_ENABLE (1 << 0)
+#define FLOW_CTRL_HALT_CPU1_EVENTS 0x14
+#define FLOW_CTRL_CPU1_CSR 0x18
+
+#ifndef __ASSEMBLY__
+void flowctrl_write_cpu_csr(unsigned int cpuid, u32 value);
+void flowctrl_write_cpu_halt(unsigned int cpuid, u32 value);
+#endif
+
+#endif
diff --git a/arch/arm/mach-tegra/fuse.c b/arch/arm/mach-tegra/fuse.c
index 1fa26d9..027f2b2 100644
--- a/arch/arm/mach-tegra/fuse.c
+++ b/arch/arm/mach-tegra/fuse.c
@@ -23,62 +23,107 @@
#include <mach/iomap.h>
#include "fuse.h"
+#include "apbio.h"
#define FUSE_UID_LOW 0x108
#define FUSE_UID_HIGH 0x10c
#define FUSE_SKU_INFO 0x110
#define FUSE_SPARE_BIT 0x200
-static inline u32 fuse_readl(unsigned long offset)
+int tegra_sku_id;
+int tegra_cpu_process_id;
+int tegra_core_process_id;
+int tegra_chip_id;
+enum tegra_revision tegra_revision;
+
+/* The BCT to use at boot is specified by board straps that can be read
+ * through a APB misc register and decoded. 2 bits, i.e. 4 possible BCTs.
+ */
+int tegra_bct_strapping;
+
+#define STRAP_OPT 0x008
+#define GMI_AD0 (1 << 4)
+#define GMI_AD1 (1 << 5)
+#define RAM_ID_MASK (GMI_AD0 | GMI_AD1)
+#define RAM_CODE_SHIFT 4
+
+static const char *tegra_revision_name[TEGRA_REVISION_MAX] = {
+ [TEGRA_REVISION_UNKNOWN] = "unknown",
+ [TEGRA_REVISION_A01] = "A01",
+ [TEGRA_REVISION_A02] = "A02",
+ [TEGRA_REVISION_A03] = "A03",
+ [TEGRA_REVISION_A03p] = "A03 prime",
+ [TEGRA_REVISION_A04] = "A04",
+};
+
+static inline u32 tegra_fuse_readl(unsigned long offset)
{
- return readl(IO_TO_VIRT(TEGRA_FUSE_BASE + offset));
+ return tegra_apb_readl(TEGRA_FUSE_BASE + offset);
}
-static inline void fuse_writel(u32 value, unsigned long offset)
+static inline bool get_spare_fuse(int bit)
{
- writel(value, IO_TO_VIRT(TEGRA_FUSE_BASE + offset));
+ return tegra_fuse_readl(FUSE_SPARE_BIT + bit * 4);
+}
+
+static enum tegra_revision tegra_get_revision(u32 id)
+{
+ u32 minor_rev = (id >> 16) & 0xf;
+
+ switch (minor_rev) {
+ case 1:
+ return TEGRA_REVISION_A01;
+ case 2:
+ return TEGRA_REVISION_A02;
+ case 3:
+ if (tegra_chip_id == TEGRA20 &&
+ (get_spare_fuse(18) || get_spare_fuse(19)))
+ return TEGRA_REVISION_A03p;
+ else
+ return TEGRA_REVISION_A03;
+ case 4:
+ return TEGRA_REVISION_A04;
+ default:
+ return TEGRA_REVISION_UNKNOWN;
+ }
}
void tegra_init_fuse(void)
{
+ u32 id;
+
u32 reg = readl(IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48));
reg |= 1 << 28;
writel(reg, IO_TO_VIRT(TEGRA_CLK_RESET_BASE + 0x48));
- pr_info("Tegra SKU: %d CPU Process: %d Core Process: %d\n",
- tegra_sku_id(), tegra_cpu_process_id(),
- tegra_core_process_id());
+ reg = tegra_fuse_readl(FUSE_SKU_INFO);
+ tegra_sku_id = reg & 0xFF;
+
+ reg = tegra_fuse_readl(FUSE_SPARE_BIT);
+ tegra_cpu_process_id = (reg >> 6) & 3;
+
+ reg = tegra_fuse_readl(FUSE_SPARE_BIT);
+ tegra_core_process_id = (reg >> 12) & 3;
+
+ reg = tegra_apb_readl(TEGRA_APB_MISC_BASE + STRAP_OPT);
+ tegra_bct_strapping = (reg & RAM_ID_MASK) >> RAM_CODE_SHIFT;
+
+ id = readl_relaxed(IO_ADDRESS(TEGRA_APB_MISC_BASE) + 0x804);
+ tegra_chip_id = (id >> 8) & 0xff;
+
+ tegra_revision = tegra_get_revision(id);
+
+ pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n",
+ tegra_revision_name[tegra_revision],
+ tegra_sku_id, tegra_cpu_process_id,
+ tegra_core_process_id);
}
unsigned long long tegra_chip_uid(void)
{
unsigned long long lo, hi;
- lo = fuse_readl(FUSE_UID_LOW);
- hi = fuse_readl(FUSE_UID_HIGH);
+ lo = tegra_fuse_readl(FUSE_UID_LOW);
+ hi = tegra_fuse_readl(FUSE_UID_HIGH);
return (hi << 32ull) | lo;
}
-
-int tegra_sku_id(void)
-{
- int sku_id;
- u32 reg = fuse_readl(FUSE_SKU_INFO);
- sku_id = reg & 0xFF;
- return sku_id;
-}
-
-int tegra_cpu_process_id(void)
-{
- int cpu_process_id;
- u32 reg = fuse_readl(FUSE_SPARE_BIT);
- cpu_process_id = (reg >> 6) & 3;
- return cpu_process_id;
-}
-
-int tegra_core_process_id(void)
-{
- int core_process_id;
- u32 reg = fuse_readl(FUSE_SPARE_BIT);
- core_process_id = (reg >> 12) & 3;
- return core_process_id;
-}
diff --git a/arch/arm/mach-tegra/fuse.h b/arch/arm/mach-tegra/fuse.h
index 584b2e2..d2107b2 100644
--- a/arch/arm/mach-tegra/fuse.h
+++ b/arch/arm/mach-tegra/fuse.h
@@ -1,6 +1,4 @@
/*
- * arch/arm/mach-tegra/fuse.c
- *
* Copyright (C) 2010 Google, Inc.
*
* Author:
@@ -17,8 +15,38 @@
*
*/
+#ifndef __MACH_TEGRA_FUSE_H
+#define __MACH_TEGRA_FUSE_H
+
+enum tegra_revision {
+ TEGRA_REVISION_UNKNOWN = 0,
+ TEGRA_REVISION_A01,
+ TEGRA_REVISION_A02,
+ TEGRA_REVISION_A03,
+ TEGRA_REVISION_A03p,
+ TEGRA_REVISION_A04,
+ TEGRA_REVISION_MAX,
+};
+
+#define SKU_ID_T20 8
+#define SKU_ID_T25SE 20
+#define SKU_ID_AP25 23
+#define SKU_ID_T25 24
+#define SKU_ID_AP25E 27
+#define SKU_ID_T25E 28
+
+#define TEGRA20 0x20
+#define TEGRA30 0x30
+
+extern int tegra_sku_id;
+extern int tegra_cpu_process_id;
+extern int tegra_core_process_id;
+extern int tegra_chip_id;
+extern enum tegra_revision tegra_revision;
+
+extern int tegra_bct_strapping;
+
unsigned long long tegra_chip_uid(void);
-int tegra_sku_id(void);
-int tegra_cpu_process_id(void);
-int tegra_core_process_id(void);
void tegra_init_fuse(void);
+
+#endif
diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S
index b5349b2..fef9c2c 100644
--- a/arch/arm/mach-tegra/headsmp.S
+++ b/arch/arm/mach-tegra/headsmp.S
@@ -1,6 +1,23 @@
#include <linux/linkage.h>
#include <linux/init.h>
+#include <asm/cache.h>
+
+#include <mach/iomap.h>
+
+#include "flowctrl.h"
+#include "reset.h"
+
+#define APB_MISC_GP_HIDREV 0x804
+#define PMC_SCRATCH41 0x140
+
+#define RESET_DATA(x) ((TEGRA_RESET_##x)*4)
+
+ .macro mov32, reg, val
+ movw \reg, #:lower16:\val
+ movt \reg, #:upper16:\val
+ .endm
+
.section ".text.head", "ax"
__CPUINIT
@@ -47,15 +64,149 @@
mov pc, lr
ENDPROC(v7_invalidate_l1)
+
ENTRY(tegra_secondary_startup)
- msr cpsr_fsxc, #0xd3
bl v7_invalidate_l1
- mrc p15, 0, r0, c0, c0, 5
- and r0, r0, #15
- ldr r1, =0x6000f100
- str r0, [r1]
-1: ldr r2, [r1]
- cmp r0, r2
- beq 1b
+ /* Enable coresight */
+ mov32 r0, 0xC5ACCE55
+ mcr p14, 0, r0, c7, c12, 6
b secondary_startup
ENDPROC(tegra_secondary_startup)
+
+ .align L1_CACHE_SHIFT
+ENTRY(__tegra_cpu_reset_handler_start)
+
+/*
+ * __tegra_cpu_reset_handler:
+ *
+ * Common handler for all CPU reset events.
+ *
+ * Register usage within the reset handler:
+ *
+ * R7 = CPU present (to the OS) mask
+ * R8 = CPU in LP1 state mask
+ * R9 = CPU in LP2 state mask
+ * R10 = CPU number
+ * R11 = CPU mask
+ * R12 = pointer to reset handler data
+ *
+ * NOTE: This code is copied to IRAM. All code and data accesses
+ * must be position-independent.
+ */
+
+ .align L1_CACHE_SHIFT
+ENTRY(__tegra_cpu_reset_handler)
+
+ cpsid aif, 0x13 @ SVC mode, interrupts disabled
+ mrc p15, 0, r10, c0, c0, 5 @ MPIDR
+ and r10, r10, #0x3 @ R10 = CPU number
+ mov r11, #1
+ mov r11, r11, lsl r10 @ R11 = CPU mask
+ adr r12, __tegra_cpu_reset_handler_data
+
+#ifdef CONFIG_SMP
+ /* Does the OS know about this CPU? */
+ ldr r7, [r12, #RESET_DATA(MASK_PRESENT)]
+ tst r7, r11 @ if !present
+ bleq __die @ CPU not present (to OS)
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+ /* Are we on Tegra20? */
+ mov32 r6, TEGRA_APB_MISC_BASE
+ ldr r0, [r6, #APB_MISC_GP_HIDREV]
+ and r0, r0, #0xff00
+ cmp r0, #(0x20 << 8)
+ bne 1f
+ /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
+ mov32 r6, TEGRA_PMC_BASE
+ mov r0, #0
+ cmp r10, #0
+ strne r0, [r6, #PMC_SCRATCH41]
+1:
+#endif
+
+#ifdef CONFIG_SMP
+ /*
+ * Can only be secondary boot (initial or hotplug) but CPU 0
+ * cannot be here.
+ */
+ cmp r10, #0
+ bleq __die @ CPU0 cannot be here
+ ldr lr, [r12, #RESET_DATA(STARTUP_SECONDARY)]
+ cmp lr, #0
+ bleq __die @ no secondary startup handler
+ bx lr
+#endif
+
+/*
+ * We don't know why the CPU reset. Just kill it.
+ * The LR register will contain the address we died at + 4.
+ */
+
+__die:
+ sub lr, lr, #4
+ mov32 r7, TEGRA_PMC_BASE
+ str lr, [r7, #PMC_SCRATCH41]
+
+ mov32 r7, TEGRA_CLK_RESET_BASE
+
+ /* Are we on Tegra20? */
+ mov32 r6, TEGRA_APB_MISC_BASE
+ ldr r0, [r6, #APB_MISC_GP_HIDREV]
+ and r0, r0, #0xff00
+ cmp r0, #(0x20 << 8)
+ bne 1f
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+ mov32 r0, 0x1111
+ mov r1, r0, lsl r10
+ str r1, [r7, #0x340] @ CLK_RST_CPU_CMPLX_SET
+#endif
+1:
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+ mov32 r6, TEGRA_FLOW_CTRL_BASE
+
+ cmp r10, #0
+ moveq r1, #FLOW_CTRL_HALT_CPU0_EVENTS
+ moveq r2, #FLOW_CTRL_CPU0_CSR
+ movne r1, r10, lsl #3
+ addne r2, r1, #(FLOW_CTRL_CPU1_CSR-8)
+ addne r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8)
+
+ /* Clear CPU "event" and "interrupt" flags and power gate
+ it when halting but not before it is in the "WFI" state. */
+ ldr r0, [r6, +r2]
+ orr r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+ orr r0, r0, #FLOW_CTRL_CSR_ENABLE
+ str r0, [r6, +r2]
+
+ /* Unconditionally halt this CPU */
+ mov r0, #FLOW_CTRL_WAITEVENT
+ str r0, [r6, +r1]
+ ldr r0, [r6, +r1] @ memory barrier
+
+ dsb
+ isb
+ wfi @ CPU should be power gated here
+
+ /* If the CPU didn't power gate above just kill it's clock. */
+
+ mov r0, r11, lsl #8
+ str r0, [r7, #348] @ CLK_CPU_CMPLX_SET
+#endif
+
+ /* If the CPU still isn't dead, just spin here. */
+ b .
+ENDPROC(__tegra_cpu_reset_handler)
+
+ .align L1_CACHE_SHIFT
+ .type __tegra_cpu_reset_handler_data, %object
+ .globl __tegra_cpu_reset_handler_data
+__tegra_cpu_reset_handler_data:
+ .rept TEGRA_RESET_DATA_SIZE
+ .long 0
+ .endr
+ .align L1_CACHE_SHIFT
+
+ENTRY(__tegra_cpu_reset_handler_end)
diff --git a/arch/arm/mach-tegra/include/mach/clk.h b/arch/arm/mach-tegra/include/mach/clk.h
index fc3ecb6..d97e403 100644
--- a/arch/arm/mach-tegra/include/mach/clk.h
+++ b/arch/arm/mach-tegra/include/mach/clk.h
@@ -22,10 +22,20 @@
struct clk;
+enum tegra_clk_ex_param {
+ TEGRA_CLK_VI_INP_SEL,
+ TEGRA_CLK_DTV_INVERT,
+ TEGRA_CLK_NAND_PAD_DIV2_ENB,
+ TEGRA_CLK_PLLD_CSI_OUT_ENB,
+ TEGRA_CLK_PLLD_DSI_OUT_ENB,
+ TEGRA_CLK_PLLD_MIPI_MUX_SEL,
+};
+
void tegra_periph_reset_deassert(struct clk *c);
void tegra_periph_reset_assert(struct clk *c);
unsigned long clk_get_rate_all_locked(struct clk *c);
void tegra2_sdmmc_tap_delay(struct clk *c, int delay);
+int tegra_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting);
#endif
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index 619abc6..90069ab 100644
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -1,11 +1,17 @@
/*
* arch/arm/mach-tegra/include/mach/debug-macro.S
*
- * Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2010,2011 Google, Inc.
+ * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
*
* Author:
* Colin Cross <ccross@google.com>
* Erik Gilling <konkers@google.com>
+ * Doug Anderson <dianders@chromium.org>
+ * Stephen Warren <swarren@nvidia.com>
+ *
+ * Portions based on mach-omap2's debug-macro.S
+ * Copyright (C) 1994-1999 Russell King
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -18,18 +24,78 @@
*
*/
+#include <linux/serial_reg.h>
+
#include <mach/io.h>
#include <mach/iomap.h>
+#include <mach/irammap.h>
- .macro addruart, rp, rv, tmp
- ldr \rp, =IO_APB_PHYS @ physical
- ldr \rv, =IO_APB_VIRT @ virtual
- orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF)
- orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF00)
- orr \rv, \rv, #(TEGRA_DEBUG_UART_BASE & 0xFF)
- orr \rv, \rv, #(TEGRA_DEBUG_UART_BASE & 0xFF00)
- .endm
+ .macro addruart, rp, rv, tmp
+ adr \rp, 99f @ actual addr of 99f
+ ldr \rv, [\rp] @ linked addr is stored there
+ sub \rv, \rv, \rp @ offset between the two
+ ldr \rp, [\rp, #4] @ linked tegra_uart_config
+ sub \tmp, \rp, \rv @ actual tegra_uart_config
+ ldr \rp, [\tmp] @ Load tegra_uart_config
+ cmp \rp, #1 @ needs intitialization?
+ bne 100f @ no; go load the addresses
+ mov \rv, #0 @ yes; record init is done
+ str \rv, [\tmp]
+ mov \rp, #TEGRA_IRAM_BASE @ See if cookie is in IRAM
+ ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET]
+ movw \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE & 0xffff
+ movt \rp, #TEGRA_IRAM_DEBUG_UART_COOKIE >> 16
+ cmp \rv, \rp @ Cookie present?
+ bne 100f @ No, use default UART
+ mov \rp, #TEGRA_IRAM_BASE @ Load UART address from IRAM
+ ldr \rv, [\rp, #TEGRA_IRAM_DEBUG_UART_OFFSET + 4]
+ str \rv, [\tmp, #4] @ Store in tegra_uart_phys
+ sub \rv, \rv, #IO_APB_PHYS @ Calculate virt address
+ add \rv, \rv, #IO_APB_VIRT
+ str \rv, [\tmp, #8] @ Store in tegra_uart_virt
+ b 100f
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
+ .align
+99: .word .
+ .word tegra_uart_config
+ .ltorg
+100: ldr \rp, [\tmp, #4] @ Load tegra_uart_phys
+ ldr \rv, [\tmp, #8] @ Load tegra_uart_virt
+ .endm
+
+#define UART_SHIFT 2
+
+/*
+ * Code below is swiped from <asm/hardware/debug-8250.S>, but add an extra
+ * check to make sure that we aren't in the CONFIG_TEGRA_DEBUG_UART_NONE case.
+ * We use the fact that all 5 valid UART addresses all have something in the
+ * 2nd-to-lowest byte.
+ */
+
+ .macro senduart, rd, rx
+ tst \rx, #0x0000ff00
+ strneb \rd, [\rx, #UART_TX << UART_SHIFT]
+1001:
+ .endm
+
+ .macro busyuart, rd, rx
+ tst \rx, #0x0000ff00
+ beq 1002f
+1001: ldrb \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1001b
+1002:
+ .endm
+
+ .macro waituart, rd, rx
+#ifdef FLOW_CONTROL
+ tst \rx, #0x0000ff00
+ beq 1002f
+1001: ldrb \rd, [\rx, #UART_MSR << UART_SHIFT]
+ tst \rd, #UART_MSR_CTS
+ beq 1001b
+1002:
+#endif
+ .endm
diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S
deleted file mode 100644
index e577cfe..0000000
--- a/arch/arm/mach-tegra/include/mach/entry-macro.S
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-tegra/include/mach/entry-macro.S
- *
- * Copyright (C) 2009 Palm, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-tegra/include/mach/gpio-tegra.h b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
index 87d37fd..6140820 100644
--- a/arch/arm/mach-tegra/include/mach/gpio-tegra.h
+++ b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
@@ -25,8 +25,6 @@
#define TEGRA_NR_GPIOS INT_GPIO_NR
-#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio))
-
struct tegra_gpio_table {
int gpio; /* GPIO number */
bool enable; /* Enable for GPIO at init? */
diff --git a/arch/arm/mach-tegra/include/mach/iomap.h b/arch/arm/mach-tegra/include/mach/iomap.h
index 19dec3a..cff672a 100644
--- a/arch/arm/mach-tegra/include/mach/iomap.h
+++ b/arch/arm/mach-tegra/include/mach/iomap.h
@@ -74,6 +74,9 @@
#define TEGRA_QUATERNARY_ICTLR_BASE 0x60004300
#define TEGRA_QUATERNARY_ICTLR_SIZE SZ_64
+#define TEGRA_QUINARY_ICTLR_BASE 0x60004400
+#define TEGRA_QUINARY_ICTLR_SIZE SZ_64
+
#define TEGRA_TMR1_BASE 0x60005000
#define TEGRA_TMR1_SIZE SZ_8
@@ -110,6 +113,9 @@
#define TEGRA_AHB_GIZMO_BASE 0x6000C004
#define TEGRA_AHB_GIZMO_SIZE 0x10C
+#define TEGRA_SB_BASE 0x6000C200
+#define TEGRA_SB_SIZE 256
+
#define TEGRA_STATMON_BASE 0x6000C400
#define TEGRA_STATMON_SIZE SZ_1K
diff --git a/arch/arm/mach-tegra/include/mach/irammap.h b/arch/arm/mach-tegra/include/mach/irammap.h
new file mode 100644
index 0000000..0cbe632
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/irammap.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __MACH_TEGRA_IRAMMAP_H
+#define __MACH_TEGRA_IRAMMAP_H
+
+#include <asm/sizes.h>
+
+/* The first 1K of IRAM is permanently reserved for the CPU reset handler */
+#define TEGRA_IRAM_RESET_HANDLER_OFFSET 0
+#define TEGRA_IRAM_RESET_HANDLER_SIZE SZ_1K
+
+/*
+ * These locations are written to by uncompress.h, and read by debug-macro.S.
+ * The first word holds the cookie value if the data is valid. The second
+ * word holds the UART physical address.
+ */
+#define TEGRA_IRAM_DEBUG_UART_OFFSET SZ_1K
+#define TEGRA_IRAM_DEBUG_UART_SIZE 8
+#define TEGRA_IRAM_DEBUG_UART_COOKIE 0x55415254
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/irqs.h b/arch/arm/mach-tegra/include/mach/irqs.h
index a2146cd..aad1a2c 100644
--- a/arch/arm/mach-tegra/include/mach/irqs.h
+++ b/arch/arm/mach-tegra/include/mach/irqs.h
@@ -165,11 +165,12 @@
#define INT_QUAD_RES_30 (INT_QUAD_BASE + 30)
#define INT_QUAD_RES_31 (INT_QUAD_BASE + 31)
-#define INT_MAIN_NR (INT_QUAD_BASE + 32 - INT_PRI_BASE)
-
+/* Tegra30 has 5 banks of 32 IRQs */
+#define INT_MAIN_NR (32 * 5)
#define INT_GPIO_BASE (INT_PRI_BASE + INT_MAIN_NR)
-#define INT_GPIO_NR (28 * 8)
+/* Tegra30 has 8 banks of 32 GPIOs */
+#define INT_GPIO_NR (32 * 8)
#define TEGRA_NR_IRQS (INT_GPIO_BASE + INT_GPIO_NR)
diff --git a/arch/arm/mach-tegra/include/mach/powergate.h b/arch/arm/mach-tegra/include/mach/powergate.h
index 39c396d..4752b1a68 100644
--- a/arch/arm/mach-tegra/include/mach/powergate.h
+++ b/arch/arm/mach-tegra/include/mach/powergate.h
@@ -27,8 +27,21 @@
#define TEGRA_POWERGATE_VDEC 4
#define TEGRA_POWERGATE_L2 5
#define TEGRA_POWERGATE_MPE 6
-#define TEGRA_NUM_POWERGATE 7
+#define TEGRA_POWERGATE_HEG 7
+#define TEGRA_POWERGATE_SATA 8
+#define TEGRA_POWERGATE_CPU1 9
+#define TEGRA_POWERGATE_CPU2 10
+#define TEGRA_POWERGATE_CPU3 11
+#define TEGRA_POWERGATE_CELP 12
+#define TEGRA_POWERGATE_3D1 13
+#define TEGRA_POWERGATE_CPU0 TEGRA_POWERGATE_CPU
+#define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D
+
+int __init tegra_powergate_init(void);
+
+int tegra_cpu_powergate_id(int cpuid);
+int tegra_powergate_is_powered(int id);
int tegra_powergate_power_on(int id);
int tegra_powergate_power_off(int id);
int tegra_powergate_remove_clamping(int id);
diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h
deleted file mode 100644
index a312988..0000000
--- a/arch/arm/mach-tegra/include/mach/system.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/system.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_SYSTEM_H
-#define __MACH_TEGRA_SYSTEM_H
-
-static inline void arch_idle(void)
-{
-}
-
-#endif
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
index 4e83237..b066ba0 100644
--- a/arch/arm/mach-tegra/include/mach/uncompress.h
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -2,10 +2,14 @@
* arch/arm/mach-tegra/include/mach/uncompress.h
*
* Copyright (C) 2010 Google, Inc.
+ * Copyright (C) 2011 Google, Inc.
+ * Copyright (C) 2011-2012 NVIDIA CORPORATION. All Rights Reserved.
*
* Author:
* Colin Cross <ccross@google.com>
* Erik Gilling <konkers@google.com>
+ * Doug Anderson <dianders@chromium.org>
+ * Stephen Warren <swarren@nvidia.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
@@ -21,40 +25,132 @@
#ifndef __MACH_TEGRA_UNCOMPRESS_H
#define __MACH_TEGRA_UNCOMPRESS_H
+#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/serial_reg.h>
#include <mach/iomap.h>
+#include <mach/irammap.h>
+
+#define DEBUG_UART_SHIFT 2
+
+volatile u8 *uart;
static void putc(int c)
{
- volatile u8 *uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
- int shift = 2;
-
if (uart == NULL)
return;
- while (!(uart[UART_LSR << shift] & UART_LSR_THRE))
+ while (!(uart[UART_LSR << DEBUG_UART_SHIFT] & UART_LSR_THRE))
barrier();
- uart[UART_TX << shift] = c;
+ uart[UART_TX << DEBUG_UART_SHIFT] = c;
}
static inline void flush(void)
{
}
+static inline void save_uart_address(void)
+{
+ u32 *buf = (u32 *)(TEGRA_IRAM_BASE + TEGRA_IRAM_DEBUG_UART_OFFSET);
+
+ if (uart) {
+ buf[0] = TEGRA_IRAM_DEBUG_UART_COOKIE;
+ buf[1] = (u32)uart;
+ } else
+ buf[0] = 0;
+}
+
+/*
+ * Setup before decompression. This is where we do UART selection for
+ * earlyprintk and init the uart_base register.
+ */
static inline void arch_decomp_setup(void)
{
- volatile u8 *uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
- int shift = 2;
+ static const struct {
+ u32 base;
+ u32 reset_reg;
+ u32 clock_reg;
+ u32 bit;
+ } uarts[] = {
+ {
+ TEGRA_UARTA_BASE,
+ TEGRA_CLK_RESET_BASE + 0x04,
+ TEGRA_CLK_RESET_BASE + 0x10,
+ 6,
+ },
+ {
+ TEGRA_UARTB_BASE,
+ TEGRA_CLK_RESET_BASE + 0x04,
+ TEGRA_CLK_RESET_BASE + 0x10,
+ 7,
+ },
+ {
+ TEGRA_UARTC_BASE,
+ TEGRA_CLK_RESET_BASE + 0x08,
+ TEGRA_CLK_RESET_BASE + 0x14,
+ 23,
+ },
+ {
+ TEGRA_UARTD_BASE,
+ TEGRA_CLK_RESET_BASE + 0x0c,
+ TEGRA_CLK_RESET_BASE + 0x18,
+ 1,
+ },
+ {
+ TEGRA_UARTE_BASE,
+ TEGRA_CLK_RESET_BASE + 0x0c,
+ TEGRA_CLK_RESET_BASE + 0x18,
+ 2,
+ },
+ };
+ int i;
+ volatile u32 *apb_misc = (volatile u32 *)TEGRA_APB_MISC_BASE;
+ u32 chip, div;
+ /*
+ * Look for the first UART that:
+ * a) Is not in reset.
+ * b) Is clocked.
+ * c) Has a 'D' in the scratchpad register.
+ *
+ * Note that on Tegra30, the first two conditions are required, since
+ * if not true, accesses to the UART scratch register will hang.
+ * Tegra20 doesn't have this issue.
+ *
+ * The intent is that the bootloader will tell the kernel which UART
+ * to use by setting up those conditions. If nothing found, we'll fall
+ * back to what's specified in TEGRA_DEBUG_UART_BASE.
+ */
+ for (i = 0; i < ARRAY_SIZE(uarts); i++) {
+ if (*(u8 *)uarts[i].reset_reg & BIT(uarts[i].bit))
+ continue;
+
+ if (!(*(u8 *)uarts[i].clock_reg & BIT(uarts[i].bit)))
+ continue;
+
+ uart = (volatile u8 *)uarts[i].base;
+ if (uart[UART_SCR << DEBUG_UART_SHIFT] != 'D')
+ continue;
+
+ break;
+ }
+ if (i == ARRAY_SIZE(uarts))
+ uart = (volatile u8 *)TEGRA_DEBUG_UART_BASE;
+ save_uart_address();
if (uart == NULL)
return;
- uart[UART_LCR << shift] |= UART_LCR_DLAB;
- uart[UART_DLL << shift] = 0x75;
- uart[UART_DLM << shift] = 0x0;
- uart[UART_LCR << shift] = 3;
+ chip = (apb_misc[0x804 / 4] >> 8) & 0xff;
+ if (chip == 0x20)
+ div = 0x0075;
+ else
+ div = 0x00dd;
+
+ uart[UART_LCR << DEBUG_UART_SHIFT] |= UART_LCR_DLAB;
+ uart[UART_DLL << DEBUG_UART_SHIFT] = div & 0xff;
+ uart[UART_DLM << DEBUG_UART_SHIFT] = div >> 8;
+ uart[UART_LCR << DEBUG_UART_SHIFT] = 3;
}
static inline void arch_decomp_wdog(void)
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index 4e1afcd..2f5bd2d 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -44,14 +44,16 @@
#define ICTLR_COP_IER_CLR 0x38
#define ICTLR_COP_IEP_CLASS 0x3c
-#define NUM_ICTLRS 4
#define FIRST_LEGACY_IRQ 32
+static int num_ictlrs;
+
static void __iomem *ictlr_reg_base[] = {
IO_ADDRESS(TEGRA_PRIMARY_ICTLR_BASE),
IO_ADDRESS(TEGRA_SECONDARY_ICTLR_BASE),
IO_ADDRESS(TEGRA_TERTIARY_ICTLR_BASE),
IO_ADDRESS(TEGRA_QUATERNARY_ICTLR_BASE),
+ IO_ADDRESS(TEGRA_QUINARY_ICTLR_BASE),
};
static inline void tegra_irq_write_mask(unsigned int irq, unsigned long reg)
@@ -60,7 +62,7 @@
u32 mask;
BUG_ON(irq < FIRST_LEGACY_IRQ ||
- irq >= FIRST_LEGACY_IRQ + NUM_ICTLRS * 32);
+ irq >= FIRST_LEGACY_IRQ + num_ictlrs * 32);
base = ictlr_reg_base[(irq - FIRST_LEGACY_IRQ) / 32];
mask = BIT((irq - FIRST_LEGACY_IRQ) % 32);
@@ -113,8 +115,18 @@
void __init tegra_init_irq(void)
{
int i;
+ void __iomem *distbase;
- for (i = 0; i < NUM_ICTLRS; i++) {
+ distbase = IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE);
+ num_ictlrs = readl_relaxed(distbase + GIC_DIST_CTR) & 0x1f;
+
+ if (num_ictlrs > ARRAY_SIZE(ictlr_reg_base)) {
+ WARN(1, "Too many (%d) interrupt controllers found. Maximum is %d.",
+ num_ictlrs, ARRAY_SIZE(ictlr_reg_base));
+ num_ictlrs = ARRAY_SIZE(ictlr_reg_base);
+ }
+
+ for (i = 0; i < num_ictlrs; i++) {
void __iomem *ictlr = ictlr_reg_base[i];
writel(~0, ictlr + ICTLR_CPU_IER_CLR);
writel(0, ictlr + ICTLR_CPU_IEP_CLASS);
@@ -131,6 +143,6 @@
* initialized elsewhere under DT.
*/
if (!of_have_populated_dt())
- gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE),
+ gic_init(0, 29, distbase,
IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
}
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 7d2b5d0..1a208db 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -24,19 +24,31 @@
#include <asm/mach-types.h>
#include <asm/smp_scu.h>
+#include <mach/clk.h>
#include <mach/iomap.h>
+#include <mach/powergate.h>
+
+#include "fuse.h"
+#include "flowctrl.h"
+#include "reset.h"
extern void tegra_secondary_startup(void);
-static DEFINE_SPINLOCK(boot_lock);
static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
#define EVP_CPU_RESET_VECTOR \
(IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE) + 0x100)
#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX \
(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x4c)
+#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET \
+ (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x340)
#define CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR \
(IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x344)
+#define CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR \
+ (IO_ADDRESS(TEGRA_CLK_RESET_BASE) + 0x34c)
+
+#define CPU_CLOCK(cpu) (0x1<<(8+cpu))
+#define CPU_RESET(cpu) (0x1111ul<<(cpu))
void __cpuinit platform_secondary_init(unsigned int cpu)
{
@@ -47,63 +59,106 @@
*/
gic_secondary_init(0);
- /*
- * Synchronise with the boot thread.
- */
- spin_lock(&boot_lock);
- spin_unlock(&boot_lock);
+}
+
+static int tegra20_power_up_cpu(unsigned int cpu)
+{
+ u32 reg;
+
+ /* Enable the CPU clock. */
+ reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+ writel(reg & ~CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+ barrier();
+ reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
+
+ /* Clear flow controller CSR. */
+ flowctrl_write_cpu_csr(cpu, 0);
+
+ return 0;
+}
+
+static int tegra30_power_up_cpu(unsigned int cpu)
+{
+ u32 reg;
+ int ret, pwrgateid;
+ unsigned long timeout;
+
+ pwrgateid = tegra_cpu_powergate_id(cpu);
+ if (pwrgateid < 0)
+ return pwrgateid;
+
+ /* If this is the first boot, toggle powergates directly. */
+ if (!tegra_powergate_is_powered(pwrgateid)) {
+ ret = tegra_powergate_power_on(pwrgateid);
+ if (ret)
+ return ret;
+
+ /* Wait for the power to come up. */
+ timeout = jiffies + 10*HZ;
+ while (tegra_powergate_is_powered(pwrgateid)) {
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+ udelay(10);
+ }
+ }
+
+ /* CPU partition is powered. Enable the CPU clock. */
+ writel(CPU_CLOCK(cpu), CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
+ reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX_CLR);
+ udelay(10);
+
+ /* Remove I/O clamps. */
+ ret = tegra_powergate_remove_clamping(pwrgateid);
+ udelay(10);
+
+ /* Clear flow controller CSR. */
+ flowctrl_write_cpu_csr(cpu, 0);
+
+ return 0;
}
int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
{
- unsigned long old_boot_vector;
- unsigned long boot_vector;
- unsigned long timeout;
- u32 reg;
+ int status;
/*
- * set synchronisation state between this boot processor
- * and the secondary one
+ * Force the CPU into reset. The CPU must remain in reset when the
+ * flow controller state is cleared (which will cause the flow
+ * controller to stop driving reset if the CPU has been power-gated
+ * via the flow controller). This will have no effect on first boot
+ * of the CPU since it should already be in reset.
*/
- spin_lock(&boot_lock);
+ writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET);
+ dmb();
+ /*
+ * Unhalt the CPU. If the flow controller was used to power-gate the
+ * CPU this will cause the flow controller to stop driving reset.
+ * The CPU will remain in reset because the clock and reset block
+ * is now driving reset.
+ */
+ flowctrl_write_cpu_halt(cpu, 0);
- /* set the reset vector to point to the secondary_startup routine */
-
- boot_vector = virt_to_phys(tegra_secondary_startup);
- old_boot_vector = readl(EVP_CPU_RESET_VECTOR);
- writel(boot_vector, EVP_CPU_RESET_VECTOR);
-
- /* enable cpu clock on cpu1 */
- reg = readl(CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
- writel(reg & ~(1<<9), CLK_RST_CONTROLLER_CLK_CPU_CMPLX);
-
- reg = (1<<13) | (1<<9) | (1<<5) | (1<<1);
- writel(reg, CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
-
- smp_wmb();
- flush_cache_all();
-
- /* unhalt the cpu */
- writel(0, IO_ADDRESS(TEGRA_FLOW_CTRL_BASE) + 0x14);
-
- timeout = jiffies + (1 * HZ);
- while (time_before(jiffies, timeout)) {
- if (readl(EVP_CPU_RESET_VECTOR) != boot_vector)
- break;
- udelay(10);
+ switch (tegra_chip_id) {
+ case TEGRA20:
+ status = tegra20_power_up_cpu(cpu);
+ break;
+ case TEGRA30:
+ status = tegra30_power_up_cpu(cpu);
+ break;
+ default:
+ status = -EINVAL;
+ break;
}
- /* put the old boot vector back */
- writel(old_boot_vector, EVP_CPU_RESET_VECTOR);
+ if (status)
+ goto done;
- /*
- * now the secondary core is starting up let it run its
- * calibrations, then wait for it to finish
- */
- spin_unlock(&boot_lock);
-
- return 0;
+ /* Take the CPU out of reset. */
+ writel(CPU_RESET(cpu), CLK_RST_CONTROLLER_RST_CPU_CMPLX_CLR);
+ wmb();
+done:
+ return status;
}
/*
@@ -128,6 +183,6 @@
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
-
+ tegra_cpu_reset_handler_init();
scu_enable(scu_base);
}
diff --git a/arch/arm/mach-tegra/pmc.c b/arch/arm/mach-tegra/pmc.c
new file mode 100644
index 0000000..7af6a54
--- /dev/null
+++ b/arch/arm/mach-tegra/pmc.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of.h>
+
+#include <mach/iomap.h>
+
+#define PMC_CTRL 0x0
+#define PMC_CTRL_INTR_LOW (1 << 17)
+
+static inline u32 tegra_pmc_readl(u32 reg)
+{
+ return readl(IO_ADDRESS(TEGRA_PMC_BASE + reg));
+}
+
+static inline void tegra_pmc_writel(u32 val, u32 reg)
+{
+ writel(val, IO_ADDRESS(TEGRA_PMC_BASE + reg));
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id matches[] __initconst = {
+ { .compatible = "nvidia,tegra20-pmc" },
+ { }
+};
+#endif
+
+void __init tegra_pmc_init(void)
+{
+ /*
+ * For now, Harmony is the only board that uses the PMC, and it wants
+ * the signal inverted. Seaboard would too if it used the PMC.
+ * Hopefully by the time other boards want to use the PMC, everything
+ * will be device-tree, or they also want it inverted.
+ */
+ bool invert_interrupt = true;
+ u32 val;
+
+#ifdef CONFIG_OF
+ if (of_have_populated_dt()) {
+ struct device_node *np;
+
+ invert_interrupt = false;
+
+ np = of_find_matching_node(NULL, matches);
+ if (np) {
+ if (of_find_property(np, "nvidia,invert-interrupt",
+ NULL))
+ invert_interrupt = true;
+ }
+ }
+#endif
+
+ val = tegra_pmc_readl(PMC_CTRL);
+ if (invert_interrupt)
+ val |= PMC_CTRL_INTR_LOW;
+ else
+ val &= ~PMC_CTRL_INTR_LOW;
+ tegra_pmc_writel(val, PMC_CTRL);
+}
diff --git a/arch/arm/mach-highbank/include/mach/system.h b/arch/arm/mach-tegra/pmc.h
similarity index 69%
rename from arch/arm/mach-highbank/include/mach/system.h
rename to arch/arm/mach-tegra/pmc.h
index b1d8b5f..8995ee4 100644
--- a/arch/arm/mach-highbank/include/mach/system.h
+++ b/arch/arm/mach-tegra/pmc.h
@@ -1,5 +1,5 @@
/*
- * Copyright 2010-2011 Calxeda, Inc.
+ * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
@@ -10,15 +10,14 @@
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
*/
-#ifndef __MACH_SYSTEM_H
-#define __MACH_SYSTEM_H
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
+#ifndef __MACH_TEGRA_PMC_H
+#define __MACH_TEGRA_PMC_H
+
+void tegra_pmc_init(void);
#endif
diff --git a/arch/arm/mach-tegra/powergate.c b/arch/arm/mach-tegra/powergate.c
index 9483064..c238699 100644
--- a/arch/arm/mach-tegra/powergate.c
+++ b/arch/arm/mach-tegra/powergate.c
@@ -31,6 +31,8 @@
#include <mach/iomap.h>
#include <mach/powergate.h>
+#include "fuse.h"
+
#define PWRGATE_TOGGLE 0x30
#define PWRGATE_TOGGLE_START (1 << 8)
@@ -38,6 +40,16 @@
#define PWRGATE_STATUS 0x38
+static int tegra_num_powerdomains;
+static int tegra_num_cpu_domains;
+static u8 *tegra_cpu_domains;
+static u8 tegra30_cpu_domains[] = {
+ TEGRA_POWERGATE_CPU0,
+ TEGRA_POWERGATE_CPU1,
+ TEGRA_POWERGATE_CPU2,
+ TEGRA_POWERGATE_CPU3,
+};
+
static DEFINE_SPINLOCK(tegra_powergate_lock);
static void __iomem *pmc = IO_ADDRESS(TEGRA_PMC_BASE);
@@ -75,7 +87,7 @@
int tegra_powergate_power_on(int id)
{
- if (id < 0 || id >= TEGRA_NUM_POWERGATE)
+ if (id < 0 || id >= tegra_num_powerdomains)
return -EINVAL;
return tegra_powergate_set(id, true);
@@ -83,17 +95,18 @@
int tegra_powergate_power_off(int id)
{
- if (id < 0 || id >= TEGRA_NUM_POWERGATE)
+ if (id < 0 || id >= tegra_num_powerdomains)
return -EINVAL;
return tegra_powergate_set(id, false);
}
-static bool tegra_powergate_is_powered(int id)
+int tegra_powergate_is_powered(int id)
{
u32 status;
- WARN_ON(id < 0 || id >= TEGRA_NUM_POWERGATE);
+ if (id < 0 || id >= tegra_num_powerdomains)
+ return -EINVAL;
status = pmc_read(PWRGATE_STATUS) & (1 << id);
return !!status;
@@ -103,7 +116,7 @@
{
u32 mask;
- if (id < 0 || id >= TEGRA_NUM_POWERGATE)
+ if (id < 0 || id >= tegra_num_powerdomains)
return -EINVAL;
/*
@@ -156,6 +169,34 @@
return ret;
}
+int tegra_cpu_powergate_id(int cpuid)
+{
+ if (cpuid > 0 && cpuid < tegra_num_cpu_domains)
+ return tegra_cpu_domains[cpuid];
+
+ return -EINVAL;
+}
+
+int __init tegra_powergate_init(void)
+{
+ switch (tegra_chip_id) {
+ case TEGRA20:
+ tegra_num_powerdomains = 7;
+ break;
+ case TEGRA30:
+ tegra_num_powerdomains = 14;
+ tegra_num_cpu_domains = 4;
+ tegra_cpu_domains = tegra30_cpu_domains;
+ break;
+ default:
+ /* Unknown Tegra variant. Disable powergating */
+ tegra_num_powerdomains = 0;
+ break;
+ }
+
+ return 0;
+}
+
#ifdef CONFIG_DEBUG_FS
static const char * const powergate_name[] = {
@@ -175,7 +216,7 @@
seq_printf(s, " powergate powered\n");
seq_printf(s, "------------------\n");
- for (i = 0; i < TEGRA_NUM_POWERGATE; i++)
+ for (i = 0; i < tegra_num_powerdomains; i++)
seq_printf(s, " %9s %7s\n", powergate_name[i],
tegra_powergate_is_powered(i) ? "yes" : "no");
return 0;
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
new file mode 100644
index 0000000..4d6a2ee
--- /dev/null
+++ b/arch/arm/mach-tegra/reset.c
@@ -0,0 +1,84 @@
+/*
+ * arch/arm/mach-tegra/reset.c
+ *
+ * Copyright (C) 2011,2012 NVIDIA Corporation.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/cpumask.h>
+#include <linux/bitops.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <mach/iomap.h>
+#include <mach/irammap.h>
+
+#include "reset.h"
+#include "fuse.h"
+
+#define TEGRA_IRAM_RESET_BASE (TEGRA_IRAM_BASE + \
+ TEGRA_IRAM_RESET_HANDLER_OFFSET)
+
+static bool is_enabled;
+
+static void tegra_cpu_reset_handler_enable(void)
+{
+ void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
+ void __iomem *evp_cpu_reset =
+ IO_ADDRESS(TEGRA_EXCEPTION_VECTORS_BASE + 0x100);
+ void __iomem *sb_ctrl = IO_ADDRESS(TEGRA_SB_BASE);
+ u32 reg;
+
+ BUG_ON(is_enabled);
+ BUG_ON(tegra_cpu_reset_handler_size > TEGRA_IRAM_RESET_HANDLER_SIZE);
+
+ memcpy(iram_base, (void *)__tegra_cpu_reset_handler_start,
+ tegra_cpu_reset_handler_size);
+
+ /*
+ * NOTE: This must be the one and only write to the EVP CPU reset
+ * vector in the entire system.
+ */
+ writel(TEGRA_IRAM_RESET_BASE + tegra_cpu_reset_handler_offset,
+ evp_cpu_reset);
+ wmb();
+ reg = readl(evp_cpu_reset);
+
+ /*
+ * Prevent further modifications to the physical reset vector.
+ * NOTE: Has no effect on chips prior to Tegra30.
+ */
+ if (tegra_chip_id != TEGRA20) {
+ reg = readl(sb_ctrl);
+ reg |= 2;
+ writel(reg, sb_ctrl);
+ wmb();
+ }
+
+ is_enabled = true;
+}
+
+void __init tegra_cpu_reset_handler_init(void)
+{
+
+#ifdef CONFIG_SMP
+ __tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] =
+ *((u32 *)cpu_present_mask);
+ __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_SECONDARY] =
+ virt_to_phys((void *)tegra_secondary_startup);
+#endif
+
+ tegra_cpu_reset_handler_enable();
+}
diff --git a/arch/arm/mach-tegra/reset.h b/arch/arm/mach-tegra/reset.h
new file mode 100644
index 0000000..de88bf8
--- /dev/null
+++ b/arch/arm/mach-tegra/reset.h
@@ -0,0 +1,50 @@
+/*
+ * arch/arm/mach-tegra/reset.h
+ *
+ * CPU reset dispatcher.
+ *
+ * Copyright (c) 2011, NVIDIA Corporation.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_RESET_H
+#define __MACH_TEGRA_RESET_H
+
+#define TEGRA_RESET_MASK_PRESENT 0
+#define TEGRA_RESET_MASK_LP1 1
+#define TEGRA_RESET_MASK_LP2 2
+#define TEGRA_RESET_STARTUP_SECONDARY 3
+#define TEGRA_RESET_STARTUP_LP2 4
+#define TEGRA_RESET_STARTUP_LP1 5
+#define TEGRA_RESET_DATA_SIZE 6
+
+#ifndef __ASSEMBLY__
+
+extern unsigned long __tegra_cpu_reset_handler_data[TEGRA_RESET_DATA_SIZE];
+
+void __tegra_cpu_reset_handler_start(void);
+void __tegra_cpu_reset_handler(void);
+void __tegra_cpu_reset_handler_end(void);
+void tegra_secondary_startup(void);
+
+#define tegra_cpu_reset_handler_offset \
+ ((u32)__tegra_cpu_reset_handler - \
+ (u32)__tegra_cpu_reset_handler_start)
+
+#define tegra_cpu_reset_handler_size \
+ (__tegra_cpu_reset_handler_end - \
+ __tegra_cpu_reset_handler_start)
+
+void __init tegra_cpu_reset_handler_init(void);
+
+#endif
+#endif
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
new file mode 100644
index 0000000..8f9fde1
--- /dev/null
+++ b/arch/arm/mach-tegra/sleep.S
@@ -0,0 +1,91 @@
+/*
+ * arch/arm/mach-tegra/sleep.S
+ *
+ * Copyright (c) 2010-2011, NVIDIA Corporation.
+ * Copyright (c) 2011, Google, Inc.
+ *
+ * Author: Colin Cross <ccross@android.com>
+ * Gary King <gking@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/linkage.h>
+#include <mach/io.h>
+#include <mach/iomap.h>
+
+#include "flowctrl.h"
+
+#define TEGRA_FLOW_CTRL_VIRT (TEGRA_FLOW_CTRL_BASE - IO_PPSB_PHYS \
+ + IO_PPSB_VIRT)
+
+/* returns the offset of the flow controller halt register for a cpu */
+.macro cpu_to_halt_reg rd, rcpu
+ cmp \rcpu, #0
+ subne \rd, \rcpu, #1
+ movne \rd, \rd, lsl #3
+ addne \rd, \rd, #0x14
+ moveq \rd, #0
+.endm
+
+/* returns the offset of the flow controller csr register for a cpu */
+.macro cpu_to_csr_reg rd, rcpu
+ cmp \rcpu, #0
+ subne \rd, \rcpu, #1
+ movne \rd, \rd, lsl #3
+ addne \rd, \rd, #0x18
+ moveq \rd, #8
+.endm
+
+/* returns the ID of the current processor */
+.macro cpu_id, rd
+ mrc p15, 0, \rd, c0, c0, 5
+ and \rd, \rd, #0xF
+.endm
+
+/* loads a 32-bit value into a register without a data access */
+.macro mov32, reg, val
+ movw \reg, #:lower16:\val
+ movt \reg, #:upper16:\val
+.endm
+
+/*
+ * tegra_cpu_wfi
+ *
+ * puts current CPU in clock-gated wfi using the flow controller
+ *
+ * corrupts r0-r3
+ * must be called with MMU on
+ */
+
+ENTRY(tegra_cpu_wfi)
+ cpu_id r0
+ cpu_to_halt_reg r1, r0
+ cpu_to_csr_reg r2, r0
+ mov32 r0, TEGRA_FLOW_CTRL_VIRT
+ mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+ str r3, [r0, r2] @ clear event & interrupt status
+ mov r3, #FLOW_CTRL_WAIT_FOR_INTERRUPT | FLOW_CTRL_JTAG_RESUME
+ str r3, [r0, r1] @ put flow controller in wait irq mode
+ dsb
+ wfi
+ mov r3, #0
+ str r3, [r0, r1] @ clear flow controller halt status
+ mov r3, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+ str r3, [r0, r2] @ clear event & interrupt status
+ dsb
+ mov pc, lr
+ENDPROC(tegra_cpu_wfi)
+
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index ff9e6b6..592a4ee 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -720,7 +720,7 @@
{
tegra2_pll_clk_init(c);
- if (tegra_sku_id() == 7)
+ if (tegra_sku_id == 7)
c->max_rate = 750000000;
}
@@ -1143,15 +1143,35 @@
static long tegra2_emc_clk_round_rate(struct clk *c, unsigned long rate)
{
- long new_rate = rate;
+ long emc_rate;
+ long clk_rate;
- new_rate = tegra_emc_round_rate(new_rate);
- if (new_rate < 0)
+ /*
+ * The slowest entry in the EMC clock table that is at least as
+ * fast as rate.
+ */
+ emc_rate = tegra_emc_round_rate(rate);
+ if (emc_rate < 0)
return c->max_rate;
- BUG_ON(new_rate != tegra2_periph_clk_round_rate(c, new_rate));
+ /*
+ * The fastest rate the PLL will generate that is at most the
+ * requested rate.
+ */
+ clk_rate = tegra2_periph_clk_round_rate(c, emc_rate);
- return new_rate;
+ /*
+ * If this fails, and emc_rate > clk_rate, it's because the maximum
+ * rate in the EMC tables is larger than the maximum rate of the EMC
+ * clock. The EMC clock's max rate is the rate it was running when the
+ * kernel booted. Such a mismatch is probably due to using the wrong
+ * BCT, i.e. using a Tegra20 BCT with an EMC table written for Tegra25.
+ */
+ WARN_ONCE(emc_rate != clk_rate,
+ "emc_rate %ld != clk_rate %ld",
+ emc_rate, clk_rate);
+
+ return emc_rate;
}
static int tegra2_emc_clk_set_rate(struct clk *c, unsigned long rate)
diff --git a/arch/arm/mach-tegra/tegra2_emc.c b/arch/arm/mach-tegra/tegra2_emc.c
index 0f7ae6e..5070d83 100644
--- a/arch/arm/mach-tegra/tegra2_emc.c
+++ b/arch/arm/mach-tegra/tegra2_emc.c
@@ -16,14 +16,19 @@
*/
#include <linux/kernel.h>
+#include <linux/device.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/tegra_emc.h>
#include <mach/iomap.h>
#include "tegra2_emc.h"
+#include "fuse.h"
#ifdef CONFIG_TEGRA_EMC_SCALING_ENABLE
static bool emc_enable = true;
@@ -32,18 +37,17 @@
#endif
module_param(emc_enable, bool, 0644);
-static void __iomem *emc = IO_ADDRESS(TEGRA_EMC_BASE);
-static const struct tegra_emc_table *tegra_emc_table;
-static int tegra_emc_table_size;
+static struct platform_device *emc_pdev;
+static void __iomem *emc_regbase;
static inline void emc_writel(u32 val, unsigned long addr)
{
- writel(val, emc + addr);
+ writel(val, emc_regbase + addr);
}
static inline u32 emc_readl(unsigned long addr)
{
- return readl(emc + addr);
+ return readl(emc_regbase + addr);
}
static const unsigned long emc_reg_addr[TEGRA_EMC_NUM_REGS] = {
@@ -98,15 +102,15 @@
/* Select the closest EMC rate that is higher than the requested rate */
long tegra_emc_round_rate(unsigned long rate)
{
+ struct tegra_emc_pdata *pdata;
int i;
int best = -1;
unsigned long distance = ULONG_MAX;
- if (!tegra_emc_table)
+ if (!emc_pdev)
return -EINVAL;
- if (!emc_enable)
- return -EINVAL;
+ pdata = emc_pdev->dev.platform_data;
pr_debug("%s: %lu\n", __func__, rate);
@@ -116,10 +120,10 @@
*/
rate = rate / 2 / 1000;
- for (i = 0; i < tegra_emc_table_size; i++) {
- if (tegra_emc_table[i].rate >= rate &&
- (tegra_emc_table[i].rate - rate) < distance) {
- distance = tegra_emc_table[i].rate - rate;
+ for (i = 0; i < pdata->num_tables; i++) {
+ if (pdata->tables[i].rate >= rate &&
+ (pdata->tables[i].rate - rate) < distance) {
+ distance = pdata->tables[i].rate - rate;
best = i;
}
}
@@ -127,9 +131,9 @@
if (best < 0)
return -EINVAL;
- pr_debug("%s: using %lu\n", __func__, tegra_emc_table[best].rate);
+ pr_debug("%s: using %lu\n", __func__, pdata->tables[best].rate);
- return tegra_emc_table[best].rate * 2 * 1000;
+ return pdata->tables[best].rate * 2 * 1000;
}
/*
@@ -142,37 +146,211 @@
*/
int tegra_emc_set_rate(unsigned long rate)
{
+ struct tegra_emc_pdata *pdata;
int i;
int j;
- if (!tegra_emc_table)
+ if (!emc_pdev)
return -EINVAL;
+ pdata = emc_pdev->dev.platform_data;
+
/*
* The EMC clock rate is twice the bus rate, and the bus rate is
* measured in kHz
*/
rate = rate / 2 / 1000;
- for (i = 0; i < tegra_emc_table_size; i++)
- if (tegra_emc_table[i].rate == rate)
+ for (i = 0; i < pdata->num_tables; i++)
+ if (pdata->tables[i].rate == rate)
break;
- if (i >= tegra_emc_table_size)
+ if (i >= pdata->num_tables)
return -EINVAL;
pr_debug("%s: setting to %lu\n", __func__, rate);
for (j = 0; j < TEGRA_EMC_NUM_REGS; j++)
- emc_writel(tegra_emc_table[i].regs[j], emc_reg_addr[j]);
+ emc_writel(pdata->tables[i].regs[j], emc_reg_addr[j]);
- emc_readl(tegra_emc_table[i].regs[TEGRA_EMC_NUM_REGS - 1]);
+ emc_readl(pdata->tables[i].regs[TEGRA_EMC_NUM_REGS - 1]);
return 0;
}
-void tegra_init_emc(const struct tegra_emc_table *table, int table_size)
+#ifdef CONFIG_OF
+static struct device_node *tegra_emc_ramcode_devnode(struct device_node *np)
{
- tegra_emc_table = table;
- tegra_emc_table_size = table_size;
+ struct device_node *iter;
+ u32 reg;
+
+ for_each_child_of_node(np, iter) {
+ if (of_property_read_u32(np, "nvidia,ram-code", ®))
+ continue;
+ if (reg == tegra_bct_strapping)
+ return of_node_get(iter);
+ }
+
+ return NULL;
}
+
+static struct tegra_emc_pdata *tegra_emc_dt_parse_pdata(
+ struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *tnp, *iter;
+ struct tegra_emc_pdata *pdata;
+ int ret, i, num_tables;
+
+ if (!np)
+ return NULL;
+
+ if (of_find_property(np, "nvidia,use-ram-code", NULL)) {
+ tnp = tegra_emc_ramcode_devnode(np);
+ if (!tnp)
+ dev_warn(&pdev->dev,
+ "can't find emc table for ram-code 0x%02x\n",
+ tegra_bct_strapping);
+ } else
+ tnp = of_node_get(np);
+
+ if (!tnp)
+ return NULL;
+
+ num_tables = 0;
+ for_each_child_of_node(tnp, iter)
+ if (of_device_is_compatible(iter, "nvidia,tegra20-emc-table"))
+ num_tables++;
+
+ if (!num_tables) {
+ pdata = NULL;
+ goto out;
+ }
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ pdata->tables = devm_kzalloc(&pdev->dev,
+ sizeof(*pdata->tables) * num_tables,
+ GFP_KERNEL);
+
+ i = 0;
+ for_each_child_of_node(tnp, iter) {
+ u32 prop;
+
+ ret = of_property_read_u32(iter, "clock-frequency", &prop);
+ if (ret) {
+ dev_err(&pdev->dev, "no clock-frequency in %s\n",
+ iter->full_name);
+ continue;
+ }
+ pdata->tables[i].rate = prop;
+
+ ret = of_property_read_u32_array(iter, "nvidia,emc-registers",
+ pdata->tables[i].regs,
+ TEGRA_EMC_NUM_REGS);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "malformed emc-registers property in %s\n",
+ iter->full_name);
+ continue;
+ }
+
+ i++;
+ }
+ pdata->num_tables = i;
+
+out:
+ of_node_put(tnp);
+ return pdata;
+}
+#else
+static struct tegra_emc_pdata *tegra_emc_dt_parse_pdata(
+ struct platform_device *pdev)
+{
+ return NULL;
+}
+#endif
+
+static struct tegra_emc_pdata __devinit *tegra_emc_fill_pdata(struct platform_device *pdev)
+{
+ struct clk *c = clk_get_sys(NULL, "emc");
+ struct tegra_emc_pdata *pdata;
+ unsigned long khz;
+ int i;
+
+ WARN_ON(pdev->dev.platform_data);
+ BUG_ON(IS_ERR_OR_NULL(c));
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ pdata->tables = devm_kzalloc(&pdev->dev, sizeof(*pdata->tables),
+ GFP_KERNEL);
+
+ pdata->tables[0].rate = clk_get_rate(c) / 2 / 1000;
+
+ for (i = 0; i < TEGRA_EMC_NUM_REGS; i++)
+ pdata->tables[0].regs[i] = emc_readl(emc_reg_addr[i]);
+
+ pdata->num_tables = 1;
+
+ khz = pdata->tables[0].rate;
+ dev_info(&pdev->dev, "no tables provided, using %ld kHz emc, "
+ "%ld kHz mem\n", khz * 2, khz);
+
+ return pdata;
+}
+
+static int __devinit tegra_emc_probe(struct platform_device *pdev)
+{
+ struct tegra_emc_pdata *pdata;
+ struct resource *res;
+
+ if (!emc_enable) {
+ dev_err(&pdev->dev, "disabled per module parameter\n");
+ return -ENODEV;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "missing register base\n");
+ return -ENOMEM;
+ }
+
+ emc_regbase = devm_request_and_ioremap(&pdev->dev, res);
+ if (!emc_regbase) {
+ dev_err(&pdev->dev, "failed to remap registers\n");
+ return -ENOMEM;
+ }
+
+ pdata = pdev->dev.platform_data;
+
+ if (!pdata)
+ pdata = tegra_emc_dt_parse_pdata(pdev);
+
+ if (!pdata)
+ pdata = tegra_emc_fill_pdata(pdev);
+
+ pdev->dev.platform_data = pdata;
+
+ emc_pdev = pdev;
+
+ return 0;
+}
+
+static struct of_device_id tegra_emc_of_match[] __devinitdata = {
+ { .compatible = "nvidia,tegra20-emc", },
+ { },
+};
+
+static struct platform_driver tegra_emc_driver = {
+ .driver = {
+ .name = "tegra-emc",
+ .owner = THIS_MODULE,
+ .of_match_table = tegra_emc_of_match,
+ },
+ .probe = tegra_emc_probe,
+};
+
+static int __init tegra_emc_init(void)
+{
+ return platform_driver_register(&tegra_emc_driver);
+}
+device_initcall(tegra_emc_init);
diff --git a/arch/arm/mach-tegra/tegra2_emc.h b/arch/arm/mach-tegra/tegra2_emc.h
index 19f08cb..f61409b 100644
--- a/arch/arm/mach-tegra/tegra2_emc.h
+++ b/arch/arm/mach-tegra/tegra2_emc.h
@@ -15,13 +15,10 @@
*
*/
-#define TEGRA_EMC_NUM_REGS 46
-
-struct tegra_emc_table {
- unsigned long rate;
- u32 regs[TEGRA_EMC_NUM_REGS];
-};
+#ifndef __MACH_TEGRA_TEGRA2_EMC_H_
+#define __MACH_TEGRA_TEGRA2_EMC_H
int tegra_emc_set_rate(unsigned long rate);
long tegra_emc_round_rate(unsigned long rate);
-void tegra_init_emc(const struct tegra_emc_table *table, int table_size);
+
+#endif
diff --git a/arch/arm/mach-tegra/tegra30_clocks.c b/arch/arm/mach-tegra/tegra30_clocks.c
new file mode 100644
index 0000000..6d08b53
--- /dev/null
+++ b/arch/arm/mach-tegra/tegra30_clocks.c
@@ -0,0 +1,3099 @@
+/*
+ * arch/arm/mach-tegra/tegra30_clocks.c
+ *
+ * Copyright (c) 2010-2011 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+#include <linux/syscore_ops.h>
+
+#include <asm/clkdev.h>
+
+#include <mach/iomap.h>
+
+#include "clock.h"
+#include "fuse.h"
+
+#define USE_PLL_LOCK_BITS 0
+
+#define RST_DEVICES_L 0x004
+#define RST_DEVICES_H 0x008
+#define RST_DEVICES_U 0x00C
+#define RST_DEVICES_V 0x358
+#define RST_DEVICES_W 0x35C
+#define RST_DEVICES_SET_L 0x300
+#define RST_DEVICES_CLR_L 0x304
+#define RST_DEVICES_SET_V 0x430
+#define RST_DEVICES_CLR_V 0x434
+#define RST_DEVICES_NUM 5
+
+#define CLK_OUT_ENB_L 0x010
+#define CLK_OUT_ENB_H 0x014
+#define CLK_OUT_ENB_U 0x018
+#define CLK_OUT_ENB_V 0x360
+#define CLK_OUT_ENB_W 0x364
+#define CLK_OUT_ENB_SET_L 0x320
+#define CLK_OUT_ENB_CLR_L 0x324
+#define CLK_OUT_ENB_SET_V 0x440
+#define CLK_OUT_ENB_CLR_V 0x444
+#define CLK_OUT_ENB_NUM 5
+
+#define RST_DEVICES_V_SWR_CPULP_RST_DIS (0x1 << 1)
+#define CLK_OUT_ENB_V_CLK_ENB_CPULP_EN (0x1 << 1)
+
+#define PERIPH_CLK_TO_BIT(c) (1 << (c->u.periph.clk_num % 32))
+#define PERIPH_CLK_TO_RST_REG(c) \
+ periph_clk_to_reg((c), RST_DEVICES_L, RST_DEVICES_V, 4)
+#define PERIPH_CLK_TO_RST_SET_REG(c) \
+ periph_clk_to_reg((c), RST_DEVICES_SET_L, RST_DEVICES_SET_V, 8)
+#define PERIPH_CLK_TO_RST_CLR_REG(c) \
+ periph_clk_to_reg((c), RST_DEVICES_CLR_L, RST_DEVICES_CLR_V, 8)
+
+#define PERIPH_CLK_TO_ENB_REG(c) \
+ periph_clk_to_reg((c), CLK_OUT_ENB_L, CLK_OUT_ENB_V, 4)
+#define PERIPH_CLK_TO_ENB_SET_REG(c) \
+ periph_clk_to_reg((c), CLK_OUT_ENB_SET_L, CLK_OUT_ENB_SET_V, 8)
+#define PERIPH_CLK_TO_ENB_CLR_REG(c) \
+ periph_clk_to_reg((c), CLK_OUT_ENB_CLR_L, CLK_OUT_ENB_CLR_V, 8)
+
+#define CLK_MASK_ARM 0x44
+#define MISC_CLK_ENB 0x48
+
+#define OSC_CTRL 0x50
+#define OSC_CTRL_OSC_FREQ_MASK (0xF<<28)
+#define OSC_CTRL_OSC_FREQ_13MHZ (0x0<<28)
+#define OSC_CTRL_OSC_FREQ_19_2MHZ (0x4<<28)
+#define OSC_CTRL_OSC_FREQ_12MHZ (0x8<<28)
+#define OSC_CTRL_OSC_FREQ_26MHZ (0xC<<28)
+#define OSC_CTRL_OSC_FREQ_16_8MHZ (0x1<<28)
+#define OSC_CTRL_OSC_FREQ_38_4MHZ (0x5<<28)
+#define OSC_CTRL_OSC_FREQ_48MHZ (0x9<<28)
+#define OSC_CTRL_MASK (0x3f2 | OSC_CTRL_OSC_FREQ_MASK)
+
+#define OSC_CTRL_PLL_REF_DIV_MASK (3<<26)
+#define OSC_CTRL_PLL_REF_DIV_1 (0<<26)
+#define OSC_CTRL_PLL_REF_DIV_2 (1<<26)
+#define OSC_CTRL_PLL_REF_DIV_4 (2<<26)
+
+#define OSC_FREQ_DET 0x58
+#define OSC_FREQ_DET_TRIG (1<<31)
+
+#define OSC_FREQ_DET_STATUS 0x5C
+#define OSC_FREQ_DET_BUSY (1<<31)
+#define OSC_FREQ_DET_CNT_MASK 0xFFFF
+
+#define PERIPH_CLK_SOURCE_I2S1 0x100
+#define PERIPH_CLK_SOURCE_EMC 0x19c
+#define PERIPH_CLK_SOURCE_OSC 0x1fc
+#define PERIPH_CLK_SOURCE_NUM1 \
+ ((PERIPH_CLK_SOURCE_OSC - PERIPH_CLK_SOURCE_I2S1) / 4)
+
+#define PERIPH_CLK_SOURCE_G3D2 0x3b0
+#define PERIPH_CLK_SOURCE_SE 0x42c
+#define PERIPH_CLK_SOURCE_NUM2 \
+ ((PERIPH_CLK_SOURCE_SE - PERIPH_CLK_SOURCE_G3D2) / 4 + 1)
+
+#define AUDIO_DLY_CLK 0x49c
+#define AUDIO_SYNC_CLK_SPDIF 0x4b4
+#define PERIPH_CLK_SOURCE_NUM3 \
+ ((AUDIO_SYNC_CLK_SPDIF - AUDIO_DLY_CLK) / 4 + 1)
+
+#define PERIPH_CLK_SOURCE_NUM (PERIPH_CLK_SOURCE_NUM1 + \
+ PERIPH_CLK_SOURCE_NUM2 + \
+ PERIPH_CLK_SOURCE_NUM3)
+
+#define CPU_SOFTRST_CTRL 0x380
+
+#define PERIPH_CLK_SOURCE_DIVU71_MASK 0xFF
+#define PERIPH_CLK_SOURCE_DIVU16_MASK 0xFFFF
+#define PERIPH_CLK_SOURCE_DIV_SHIFT 0
+#define PERIPH_CLK_SOURCE_DIVIDLE_SHIFT 8
+#define PERIPH_CLK_SOURCE_DIVIDLE_VAL 50
+#define PERIPH_CLK_UART_DIV_ENB (1<<24)
+#define PERIPH_CLK_VI_SEL_EX_SHIFT 24
+#define PERIPH_CLK_VI_SEL_EX_MASK (0x3<<PERIPH_CLK_VI_SEL_EX_SHIFT)
+#define PERIPH_CLK_NAND_DIV_EX_ENB (1<<8)
+#define PERIPH_CLK_DTV_POLARITY_INV (1<<25)
+
+#define AUDIO_SYNC_SOURCE_MASK 0x0F
+#define AUDIO_SYNC_DISABLE_BIT 0x10
+#define AUDIO_SYNC_TAP_NIBBLE_SHIFT(c) ((c->reg_shift - 24) * 4)
+
+#define PLL_BASE 0x0
+#define PLL_BASE_BYPASS (1<<31)
+#define PLL_BASE_ENABLE (1<<30)
+#define PLL_BASE_REF_ENABLE (1<<29)
+#define PLL_BASE_OVERRIDE (1<<28)
+#define PLL_BASE_LOCK (1<<27)
+#define PLL_BASE_DIVP_MASK (0x7<<20)
+#define PLL_BASE_DIVP_SHIFT 20
+#define PLL_BASE_DIVN_MASK (0x3FF<<8)
+#define PLL_BASE_DIVN_SHIFT 8
+#define PLL_BASE_DIVM_MASK (0x1F)
+#define PLL_BASE_DIVM_SHIFT 0
+
+#define PLL_OUT_RATIO_MASK (0xFF<<8)
+#define PLL_OUT_RATIO_SHIFT 8
+#define PLL_OUT_OVERRIDE (1<<2)
+#define PLL_OUT_CLKEN (1<<1)
+#define PLL_OUT_RESET_DISABLE (1<<0)
+
+#define PLL_MISC(c) \
+ (((c)->flags & PLL_ALT_MISC_REG) ? 0x4 : 0xc)
+#define PLL_MISC_LOCK_ENABLE(c) \
+ (((c)->flags & (PLLU | PLLD)) ? (1<<22) : (1<<18))
+
+#define PLL_MISC_DCCON_SHIFT 20
+#define PLL_MISC_CPCON_SHIFT 8
+#define PLL_MISC_CPCON_MASK (0xF<<PLL_MISC_CPCON_SHIFT)
+#define PLL_MISC_LFCON_SHIFT 4
+#define PLL_MISC_LFCON_MASK (0xF<<PLL_MISC_LFCON_SHIFT)
+#define PLL_MISC_VCOCON_SHIFT 0
+#define PLL_MISC_VCOCON_MASK (0xF<<PLL_MISC_VCOCON_SHIFT)
+#define PLLD_MISC_CLKENABLE (1<<30)
+
+#define PLLU_BASE_POST_DIV (1<<20)
+
+#define PLLD_BASE_DSIB_MUX_SHIFT 25
+#define PLLD_BASE_DSIB_MUX_MASK (1<<PLLD_BASE_DSIB_MUX_SHIFT)
+#define PLLD_BASE_CSI_CLKENABLE (1<<26)
+#define PLLD_MISC_DSI_CLKENABLE (1<<30)
+#define PLLD_MISC_DIV_RST (1<<23)
+#define PLLD_MISC_DCCON_SHIFT 12
+
+#define PLLDU_LFCON_SET_DIVN 600
+
+/* FIXME: OUT_OF_TABLE_CPCON per pll */
+#define OUT_OF_TABLE_CPCON 0x8
+
+#define SUPER_CLK_MUX 0x00
+#define SUPER_STATE_SHIFT 28
+#define SUPER_STATE_MASK (0xF << SUPER_STATE_SHIFT)
+#define SUPER_STATE_STANDBY (0x0 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_IDLE (0x1 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_RUN (0x2 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_IRQ (0x3 << SUPER_STATE_SHIFT)
+#define SUPER_STATE_FIQ (0x4 << SUPER_STATE_SHIFT)
+#define SUPER_LP_DIV2_BYPASS (0x1 << 16)
+#define SUPER_SOURCE_MASK 0xF
+#define SUPER_FIQ_SOURCE_SHIFT 12
+#define SUPER_IRQ_SOURCE_SHIFT 8
+#define SUPER_RUN_SOURCE_SHIFT 4
+#define SUPER_IDLE_SOURCE_SHIFT 0
+
+#define SUPER_CLK_DIVIDER 0x04
+#define SUPER_CLOCK_DIV_U71_SHIFT 16
+#define SUPER_CLOCK_DIV_U71_MASK (0xff << SUPER_CLOCK_DIV_U71_SHIFT)
+/* guarantees safe cpu backup */
+#define SUPER_CLOCK_DIV_U71_MIN 0x2
+
+#define BUS_CLK_DISABLE (1<<3)
+#define BUS_CLK_DIV_MASK 0x3
+
+#define PMC_CTRL 0x0
+ #define PMC_CTRL_BLINK_ENB (1 << 7)
+
+#define PMC_DPD_PADS_ORIDE 0x1c
+ #define PMC_DPD_PADS_ORIDE_BLINK_ENB (1 << 20)
+
+#define PMC_BLINK_TIMER_DATA_ON_SHIFT 0
+#define PMC_BLINK_TIMER_DATA_ON_MASK 0x7fff
+#define PMC_BLINK_TIMER_ENB (1 << 15)
+#define PMC_BLINK_TIMER_DATA_OFF_SHIFT 16
+#define PMC_BLINK_TIMER_DATA_OFF_MASK 0xffff
+
+#define PMC_PLLP_WB0_OVERRIDE 0xf8
+#define PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE (1 << 12)
+
+#define UTMIP_PLL_CFG2 0x488
+#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xfff) << 6)
+#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN (1 << 0)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN (1 << 2)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN (1 << 4)
+
+#define UTMIP_PLL_CFG1 0x484
+#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)
+#define UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN (1 << 14)
+#define UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN (1 << 12)
+#define UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN (1 << 16)
+
+#define PLLE_BASE_CML_ENABLE (1<<31)
+#define PLLE_BASE_ENABLE (1<<30)
+#define PLLE_BASE_DIVCML_SHIFT 24
+#define PLLE_BASE_DIVCML_MASK (0xf<<PLLE_BASE_DIVCML_SHIFT)
+#define PLLE_BASE_DIVP_SHIFT 16
+#define PLLE_BASE_DIVP_MASK (0x3f<<PLLE_BASE_DIVP_SHIFT)
+#define PLLE_BASE_DIVN_SHIFT 8
+#define PLLE_BASE_DIVN_MASK (0xFF<<PLLE_BASE_DIVN_SHIFT)
+#define PLLE_BASE_DIVM_SHIFT 0
+#define PLLE_BASE_DIVM_MASK (0xFF<<PLLE_BASE_DIVM_SHIFT)
+#define PLLE_BASE_DIV_MASK \
+ (PLLE_BASE_DIVCML_MASK | PLLE_BASE_DIVP_MASK | \
+ PLLE_BASE_DIVN_MASK | PLLE_BASE_DIVM_MASK)
+#define PLLE_BASE_DIV(m, n, p, cml) \
+ (((cml)<<PLLE_BASE_DIVCML_SHIFT) | ((p)<<PLLE_BASE_DIVP_SHIFT) | \
+ ((n)<<PLLE_BASE_DIVN_SHIFT) | ((m)<<PLLE_BASE_DIVM_SHIFT))
+
+#define PLLE_MISC_SETUP_BASE_SHIFT 16
+#define PLLE_MISC_SETUP_BASE_MASK (0xFFFF<<PLLE_MISC_SETUP_BASE_SHIFT)
+#define PLLE_MISC_READY (1<<15)
+#define PLLE_MISC_LOCK (1<<11)
+#define PLLE_MISC_LOCK_ENABLE (1<<9)
+#define PLLE_MISC_SETUP_EX_SHIFT 2
+#define PLLE_MISC_SETUP_EX_MASK (0x3<<PLLE_MISC_SETUP_EX_SHIFT)
+#define PLLE_MISC_SETUP_MASK \
+ (PLLE_MISC_SETUP_BASE_MASK | PLLE_MISC_SETUP_EX_MASK)
+#define PLLE_MISC_SETUP_VALUE \
+ ((0x7<<PLLE_MISC_SETUP_BASE_SHIFT) | (0x0<<PLLE_MISC_SETUP_EX_SHIFT))
+
+#define PLLE_SS_CTRL 0x68
+#define PLLE_SS_INCINTRV_SHIFT 24
+#define PLLE_SS_INCINTRV_MASK (0x3f<<PLLE_SS_INCINTRV_SHIFT)
+#define PLLE_SS_INC_SHIFT 16
+#define PLLE_SS_INC_MASK (0xff<<PLLE_SS_INC_SHIFT)
+#define PLLE_SS_MAX_SHIFT 0
+#define PLLE_SS_MAX_MASK (0x1ff<<PLLE_SS_MAX_SHIFT)
+#define PLLE_SS_COEFFICIENTS_MASK \
+ (PLLE_SS_INCINTRV_MASK | PLLE_SS_INC_MASK | PLLE_SS_MAX_MASK)
+#define PLLE_SS_COEFFICIENTS_12MHZ \
+ ((0x18<<PLLE_SS_INCINTRV_SHIFT) | (0x1<<PLLE_SS_INC_SHIFT) | \
+ (0x24<<PLLE_SS_MAX_SHIFT))
+#define PLLE_SS_DISABLE ((1<<12) | (1<<11) | (1<<10))
+
+#define PLLE_AUX 0x48c
+#define PLLE_AUX_PLLP_SEL (1<<2)
+#define PLLE_AUX_CML_SATA_ENABLE (1<<1)
+#define PLLE_AUX_CML_PCIE_ENABLE (1<<0)
+
+#define PMC_SATA_PWRGT 0x1ac
+#define PMC_SATA_PWRGT_PLLE_IDDQ_VALUE (1<<5)
+#define PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL (1<<4)
+
+#define ROUND_DIVIDER_UP 0
+#define ROUND_DIVIDER_DOWN 1
+
+/* FIXME: recommended safety delay after lock is detected */
+#define PLL_POST_LOCK_DELAY 100
+
+/**
+* Structure defining the fields for USB UTMI clocks Parameters.
+*/
+struct utmi_clk_param {
+ /* Oscillator Frequency in KHz */
+ u32 osc_frequency;
+ /* UTMIP PLL Enable Delay Count */
+ u8 enable_delay_count;
+ /* UTMIP PLL Stable count */
+ u8 stable_count;
+ /* UTMIP PLL Active delay count */
+ u8 active_delay_count;
+ /* UTMIP PLL Xtal frequency count */
+ u8 xtal_freq_count;
+};
+
+static const struct utmi_clk_param utmi_parameters[] = {
+ {
+ .osc_frequency = 13000000,
+ .enable_delay_count = 0x02,
+ .stable_count = 0x33,
+ .active_delay_count = 0x05,
+ .xtal_freq_count = 0x7F
+ },
+ {
+ .osc_frequency = 19200000,
+ .enable_delay_count = 0x03,
+ .stable_count = 0x4B,
+ .active_delay_count = 0x06,
+ .xtal_freq_count = 0xBB},
+ {
+ .osc_frequency = 12000000,
+ .enable_delay_count = 0x02,
+ .stable_count = 0x2F,
+ .active_delay_count = 0x04,
+ .xtal_freq_count = 0x76
+ },
+ {
+ .osc_frequency = 26000000,
+ .enable_delay_count = 0x04,
+ .stable_count = 0x66,
+ .active_delay_count = 0x09,
+ .xtal_freq_count = 0xFE
+ },
+ {
+ .osc_frequency = 16800000,
+ .enable_delay_count = 0x03,
+ .stable_count = 0x41,
+ .active_delay_count = 0x0A,
+ .xtal_freq_count = 0xA4
+ },
+};
+
+static void __iomem *reg_clk_base = IO_ADDRESS(TEGRA_CLK_RESET_BASE);
+static void __iomem *reg_pmc_base = IO_ADDRESS(TEGRA_PMC_BASE);
+static void __iomem *misc_gp_hidrev_base = IO_ADDRESS(TEGRA_APB_MISC_BASE);
+
+#define MISC_GP_HIDREV 0x804
+
+/*
+ * Some peripheral clocks share an enable bit, so refcount the enable bits
+ * in registers CLK_ENABLE_L, ... CLK_ENABLE_W
+ */
+static int tegra_periph_clk_enable_refcount[CLK_OUT_ENB_NUM * 32];
+
+#define clk_writel(value, reg) \
+ __raw_writel(value, (u32)reg_clk_base + (reg))
+#define clk_readl(reg) \
+ __raw_readl((u32)reg_clk_base + (reg))
+#define pmc_writel(value, reg) \
+ __raw_writel(value, (u32)reg_pmc_base + (reg))
+#define pmc_readl(reg) \
+ __raw_readl((u32)reg_pmc_base + (reg))
+#define chipid_readl() \
+ __raw_readl((u32)misc_gp_hidrev_base + MISC_GP_HIDREV)
+
+#define clk_writel_delay(value, reg) \
+ do { \
+ __raw_writel((value), (u32)reg_clk_base + (reg)); \
+ udelay(2); \
+ } while (0)
+
+
+static inline int clk_set_div(struct clk *c, u32 n)
+{
+ return clk_set_rate(c, (clk_get_rate(c->parent) + n-1) / n);
+}
+
+static inline u32 periph_clk_to_reg(
+ struct clk *c, u32 reg_L, u32 reg_V, int offs)
+{
+ u32 reg = c->u.periph.clk_num / 32;
+ BUG_ON(reg >= RST_DEVICES_NUM);
+ if (reg < 3)
+ reg = reg_L + (reg * offs);
+ else
+ reg = reg_V + ((reg - 3) * offs);
+ return reg;
+}
+
+static unsigned long clk_measure_input_freq(void)
+{
+ u32 clock_autodetect;
+ clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET);
+ do {} while (clk_readl(OSC_FREQ_DET_STATUS) & OSC_FREQ_DET_BUSY);
+ clock_autodetect = clk_readl(OSC_FREQ_DET_STATUS);
+ if (clock_autodetect >= 732 - 3 && clock_autodetect <= 732 + 3) {
+ return 12000000;
+ } else if (clock_autodetect >= 794 - 3 && clock_autodetect <= 794 + 3) {
+ return 13000000;
+ } else if (clock_autodetect >= 1172 - 3 && clock_autodetect <= 1172 + 3) {
+ return 19200000;
+ } else if (clock_autodetect >= 1587 - 3 && clock_autodetect <= 1587 + 3) {
+ return 26000000;
+ } else if (clock_autodetect >= 1025 - 3 && clock_autodetect <= 1025 + 3) {
+ return 16800000;
+ } else if (clock_autodetect >= 2344 - 3 && clock_autodetect <= 2344 + 3) {
+ return 38400000;
+ } else if (clock_autodetect >= 2928 - 3 && clock_autodetect <= 2928 + 3) {
+ return 48000000;
+ } else {
+ pr_err("%s: Unexpected clock autodetect value %d", __func__,
+ clock_autodetect);
+ BUG();
+ return 0;
+ }
+}
+
+static int clk_div71_get_divider(unsigned long parent_rate, unsigned long rate,
+ u32 flags, u32 round_mode)
+{
+ s64 divider_u71 = parent_rate;
+ if (!rate)
+ return -EINVAL;
+
+ if (!(flags & DIV_U71_INT))
+ divider_u71 *= 2;
+ if (round_mode == ROUND_DIVIDER_UP)
+ divider_u71 += rate - 1;
+ do_div(divider_u71, rate);
+ if (flags & DIV_U71_INT)
+ divider_u71 *= 2;
+
+ if (divider_u71 - 2 < 0)
+ return 0;
+
+ if (divider_u71 - 2 > 255)
+ return -EINVAL;
+
+ return divider_u71 - 2;
+}
+
+static int clk_div16_get_divider(unsigned long parent_rate, unsigned long rate)
+{
+ s64 divider_u16;
+
+ divider_u16 = parent_rate;
+ if (!rate)
+ return -EINVAL;
+ divider_u16 += rate - 1;
+ do_div(divider_u16, rate);
+
+ if (divider_u16 - 1 < 0)
+ return 0;
+
+ if (divider_u16 - 1 > 0xFFFF)
+ return -EINVAL;
+
+ return divider_u16 - 1;
+}
+
+/* clk_m functions */
+static unsigned long tegra30_clk_m_autodetect_rate(struct clk *c)
+{
+ u32 osc_ctrl = clk_readl(OSC_CTRL);
+ u32 auto_clock_control = osc_ctrl & ~OSC_CTRL_OSC_FREQ_MASK;
+ u32 pll_ref_div = osc_ctrl & OSC_CTRL_PLL_REF_DIV_MASK;
+
+ c->rate = clk_measure_input_freq();
+ switch (c->rate) {
+ case 12000000:
+ auto_clock_control |= OSC_CTRL_OSC_FREQ_12MHZ;
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+ break;
+ case 13000000:
+ auto_clock_control |= OSC_CTRL_OSC_FREQ_13MHZ;
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+ break;
+ case 19200000:
+ auto_clock_control |= OSC_CTRL_OSC_FREQ_19_2MHZ;
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+ break;
+ case 26000000:
+ auto_clock_control |= OSC_CTRL_OSC_FREQ_26MHZ;
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+ break;
+ case 16800000:
+ auto_clock_control |= OSC_CTRL_OSC_FREQ_16_8MHZ;
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_1);
+ break;
+ case 38400000:
+ auto_clock_control |= OSC_CTRL_OSC_FREQ_38_4MHZ;
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_2);
+ break;
+ case 48000000:
+ auto_clock_control |= OSC_CTRL_OSC_FREQ_48MHZ;
+ BUG_ON(pll_ref_div != OSC_CTRL_PLL_REF_DIV_4);
+ break;
+ default:
+ pr_err("%s: Unexpected clock rate %ld", __func__, c->rate);
+ BUG();
+ }
+ clk_writel(auto_clock_control, OSC_CTRL);
+ return c->rate;
+}
+
+static void tegra30_clk_m_init(struct clk *c)
+{
+ pr_debug("%s on clock %s\n", __func__, c->name);
+ tegra30_clk_m_autodetect_rate(c);
+}
+
+static int tegra30_clk_m_enable(struct clk *c)
+{
+ pr_debug("%s on clock %s\n", __func__, c->name);
+ return 0;
+}
+
+static void tegra30_clk_m_disable(struct clk *c)
+{
+ pr_debug("%s on clock %s\n", __func__, c->name);
+ WARN(1, "Attempting to disable main SoC clock\n");
+}
+
+static struct clk_ops tegra_clk_m_ops = {
+ .init = tegra30_clk_m_init,
+ .enable = tegra30_clk_m_enable,
+ .disable = tegra30_clk_m_disable,
+};
+
+static struct clk_ops tegra_clk_m_div_ops = {
+ .enable = tegra30_clk_m_enable,
+};
+
+/* PLL reference divider functions */
+static void tegra30_pll_ref_init(struct clk *c)
+{
+ u32 pll_ref_div = clk_readl(OSC_CTRL) & OSC_CTRL_PLL_REF_DIV_MASK;
+ pr_debug("%s on clock %s\n", __func__, c->name);
+
+ switch (pll_ref_div) {
+ case OSC_CTRL_PLL_REF_DIV_1:
+ c->div = 1;
+ break;
+ case OSC_CTRL_PLL_REF_DIV_2:
+ c->div = 2;
+ break;
+ case OSC_CTRL_PLL_REF_DIV_4:
+ c->div = 4;
+ break;
+ default:
+ pr_err("%s: Invalid pll ref divider %d", __func__, pll_ref_div);
+ BUG();
+ }
+ c->mul = 1;
+ c->state = ON;
+}
+
+static struct clk_ops tegra_pll_ref_ops = {
+ .init = tegra30_pll_ref_init,
+ .enable = tegra30_clk_m_enable,
+ .disable = tegra30_clk_m_disable,
+};
+
+/* super clock functions */
+/* "super clocks" on tegra30 have two-stage muxes, fractional 7.1 divider and
+ * clock skipping super divider. We will ignore the clock skipping divider,
+ * since we can't lower the voltage when using the clock skip, but we can if
+ * we lower the PLL frequency. We will use 7.1 divider for CPU super-clock
+ * only when its parent is a fixed rate PLL, since we can't change PLL rate
+ * in this case.
+ */
+static void tegra30_super_clk_init(struct clk *c)
+{
+ u32 val;
+ int source;
+ int shift;
+ const struct clk_mux_sel *sel;
+ val = clk_readl(c->reg + SUPER_CLK_MUX);
+ c->state = ON;
+ BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+ ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+ shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
+ SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
+ source = (val >> shift) & SUPER_SOURCE_MASK;
+ if (c->flags & DIV_2)
+ source |= val & SUPER_LP_DIV2_BYPASS;
+ for (sel = c->inputs; sel->input != NULL; sel++) {
+ if (sel->value == source)
+ break;
+ }
+ BUG_ON(sel->input == NULL);
+ c->parent = sel->input;
+
+ if (c->flags & DIV_U71) {
+ /* Init safe 7.1 divider value (does not affect PLLX path) */
+ clk_writel(SUPER_CLOCK_DIV_U71_MIN << SUPER_CLOCK_DIV_U71_SHIFT,
+ c->reg + SUPER_CLK_DIVIDER);
+ c->mul = 2;
+ c->div = 2;
+ if (!(c->parent->flags & PLLX))
+ c->div += SUPER_CLOCK_DIV_U71_MIN;
+ } else
+ clk_writel(0, c->reg + SUPER_CLK_DIVIDER);
+}
+
+static int tegra30_super_clk_enable(struct clk *c)
+{
+ return 0;
+}
+
+static void tegra30_super_clk_disable(struct clk *c)
+{
+ /* since tegra 3 has 2 CPU super clocks - low power lp-mode clock and
+ geared up g-mode super clock - mode switch may request to disable
+ either of them; accept request with no affect on h/w */
+}
+
+static int tegra30_super_clk_set_parent(struct clk *c, struct clk *p)
+{
+ u32 val;
+ const struct clk_mux_sel *sel;
+ int shift;
+
+ val = clk_readl(c->reg + SUPER_CLK_MUX);
+ BUG_ON(((val & SUPER_STATE_MASK) != SUPER_STATE_RUN) &&
+ ((val & SUPER_STATE_MASK) != SUPER_STATE_IDLE));
+ shift = ((val & SUPER_STATE_MASK) == SUPER_STATE_IDLE) ?
+ SUPER_IDLE_SOURCE_SHIFT : SUPER_RUN_SOURCE_SHIFT;
+ for (sel = c->inputs; sel->input != NULL; sel++) {
+ if (sel->input == p) {
+ /* For LP mode super-clock switch between PLLX direct
+ and divided-by-2 outputs is allowed only when other
+ than PLLX clock source is current parent */
+ if ((c->flags & DIV_2) && (p->flags & PLLX) &&
+ ((sel->value ^ val) & SUPER_LP_DIV2_BYPASS)) {
+ if (c->parent->flags & PLLX)
+ return -EINVAL;
+ val ^= SUPER_LP_DIV2_BYPASS;
+ clk_writel_delay(val, c->reg);
+ }
+ val &= ~(SUPER_SOURCE_MASK << shift);
+ val |= (sel->value & SUPER_SOURCE_MASK) << shift;
+
+ /* 7.1 divider for CPU super-clock does not affect
+ PLLX path */
+ if (c->flags & DIV_U71) {
+ u32 div = 0;
+ if (!(p->flags & PLLX)) {
+ div = clk_readl(c->reg +
+ SUPER_CLK_DIVIDER);
+ div &= SUPER_CLOCK_DIV_U71_MASK;
+ div >>= SUPER_CLOCK_DIV_U71_SHIFT;
+ }
+ c->div = div + 2;
+ c->mul = 2;
+ }
+
+ if (c->refcnt)
+ clk_enable(p);
+
+ clk_writel_delay(val, c->reg);
+
+ if (c->refcnt && c->parent)
+ clk_disable(c->parent);
+
+ clk_reparent(c, p);
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+/*
+ * Do not use super clocks "skippers", since dividing using a clock skipper
+ * does not allow the voltage to be scaled down. Instead adjust the rate of
+ * the parent clock. This requires that the parent of a super clock have no
+ * other children, otherwise the rate will change underneath the other
+ * children. Special case: if fixed rate PLL is CPU super clock parent the
+ * rate of this PLL can't be changed, and it has many other children. In
+ * this case use 7.1 fractional divider to adjust the super clock rate.
+ */
+static int tegra30_super_clk_set_rate(struct clk *c, unsigned long rate)
+{
+ if ((c->flags & DIV_U71) && (c->parent->flags & PLL_FIXED)) {
+ int div = clk_div71_get_divider(c->parent->u.pll.fixed_rate,
+ rate, c->flags, ROUND_DIVIDER_DOWN);
+ div = max(div, SUPER_CLOCK_DIV_U71_MIN);
+
+ clk_writel(div << SUPER_CLOCK_DIV_U71_SHIFT,
+ c->reg + SUPER_CLK_DIVIDER);
+ c->div = div + 2;
+ c->mul = 2;
+ return 0;
+ }
+ return clk_set_rate(c->parent, rate);
+}
+
+static struct clk_ops tegra_super_ops = {
+ .init = tegra30_super_clk_init,
+ .enable = tegra30_super_clk_enable,
+ .disable = tegra30_super_clk_disable,
+ .set_parent = tegra30_super_clk_set_parent,
+ .set_rate = tegra30_super_clk_set_rate,
+};
+
+static int tegra30_twd_clk_set_rate(struct clk *c, unsigned long rate)
+{
+ /* The input value 'rate' is the clock rate of the CPU complex. */
+ c->rate = (rate * c->mul) / c->div;
+ return 0;
+}
+
+static struct clk_ops tegra30_twd_ops = {
+ .set_rate = tegra30_twd_clk_set_rate,
+};
+
+/* Blink output functions */
+
+static void tegra30_blink_clk_init(struct clk *c)
+{
+ u32 val;
+
+ val = pmc_readl(PMC_CTRL);
+ c->state = (val & PMC_CTRL_BLINK_ENB) ? ON : OFF;
+ c->mul = 1;
+ val = pmc_readl(c->reg);
+
+ if (val & PMC_BLINK_TIMER_ENB) {
+ unsigned int on_off;
+
+ on_off = (val >> PMC_BLINK_TIMER_DATA_ON_SHIFT) &
+ PMC_BLINK_TIMER_DATA_ON_MASK;
+ val >>= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
+ val &= PMC_BLINK_TIMER_DATA_OFF_MASK;
+ on_off += val;
+ /* each tick in the blink timer is 4 32KHz clocks */
+ c->div = on_off * 4;
+ } else {
+ c->div = 1;
+ }
+}
+
+static int tegra30_blink_clk_enable(struct clk *c)
+{
+ u32 val;
+
+ val = pmc_readl(PMC_DPD_PADS_ORIDE);
+ pmc_writel(val | PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
+
+ val = pmc_readl(PMC_CTRL);
+ pmc_writel(val | PMC_CTRL_BLINK_ENB, PMC_CTRL);
+
+ return 0;
+}
+
+static void tegra30_blink_clk_disable(struct clk *c)
+{
+ u32 val;
+
+ val = pmc_readl(PMC_CTRL);
+ pmc_writel(val & ~PMC_CTRL_BLINK_ENB, PMC_CTRL);
+
+ val = pmc_readl(PMC_DPD_PADS_ORIDE);
+ pmc_writel(val & ~PMC_DPD_PADS_ORIDE_BLINK_ENB, PMC_DPD_PADS_ORIDE);
+}
+
+static int tegra30_blink_clk_set_rate(struct clk *c, unsigned long rate)
+{
+ unsigned long parent_rate = clk_get_rate(c->parent);
+ if (rate >= parent_rate) {
+ c->div = 1;
+ pmc_writel(0, c->reg);
+ } else {
+ unsigned int on_off;
+ u32 val;
+
+ on_off = DIV_ROUND_UP(parent_rate / 8, rate);
+ c->div = on_off * 8;
+
+ val = (on_off & PMC_BLINK_TIMER_DATA_ON_MASK) <<
+ PMC_BLINK_TIMER_DATA_ON_SHIFT;
+ on_off &= PMC_BLINK_TIMER_DATA_OFF_MASK;
+ on_off <<= PMC_BLINK_TIMER_DATA_OFF_SHIFT;
+ val |= on_off;
+ val |= PMC_BLINK_TIMER_ENB;
+ pmc_writel(val, c->reg);
+ }
+
+ return 0;
+}
+
+static struct clk_ops tegra_blink_clk_ops = {
+ .init = &tegra30_blink_clk_init,
+ .enable = &tegra30_blink_clk_enable,
+ .disable = &tegra30_blink_clk_disable,
+ .set_rate = &tegra30_blink_clk_set_rate,
+};
+
+/* PLL Functions */
+static int tegra30_pll_clk_wait_for_lock(struct clk *c, u32 lock_reg,
+ u32 lock_bit)
+{
+#if USE_PLL_LOCK_BITS
+ int i;
+ for (i = 0; i < c->u.pll.lock_delay; i++) {
+ if (clk_readl(lock_reg) & lock_bit) {
+ udelay(PLL_POST_LOCK_DELAY);
+ return 0;
+ }
+ udelay(2); /* timeout = 2 * lock time */
+ }
+ pr_err("Timed out waiting for lock bit on pll %s", c->name);
+ return -1;
+#endif
+ udelay(c->u.pll.lock_delay);
+
+ return 0;
+}
+
+
+static void tegra30_utmi_param_configure(struct clk *c)
+{
+ u32 reg;
+ int i;
+ unsigned long main_rate =
+ clk_get_rate(c->parent->parent);
+
+ for (i = 0; i < ARRAY_SIZE(utmi_parameters); i++) {
+ if (main_rate == utmi_parameters[i].osc_frequency)
+ break;
+ }
+
+ if (i >= ARRAY_SIZE(utmi_parameters)) {
+ pr_err("%s: Unexpected main rate %lu\n", __func__, main_rate);
+ return;
+ }
+
+ reg = clk_readl(UTMIP_PLL_CFG2);
+
+ /* Program UTMIP PLL stable and active counts */
+ /* [FIXME] arclk_rst.h says WRONG! This should be 1ms -> 0x50 Check! */
+ reg &= ~UTMIP_PLL_CFG2_STABLE_COUNT(~0);
+ reg |= UTMIP_PLL_CFG2_STABLE_COUNT(
+ utmi_parameters[i].stable_count);
+
+ reg &= ~UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(~0);
+
+ reg |= UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(
+ utmi_parameters[i].active_delay_count);
+
+ /* Remove power downs from UTMIP PLL control bits */
+ reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN;
+
+ clk_writel(reg, UTMIP_PLL_CFG2);
+
+ /* Program UTMIP PLL delay and oscillator frequency counts */
+ reg = clk_readl(UTMIP_PLL_CFG1);
+ reg &= ~UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(~0);
+
+ reg |= UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(
+ utmi_parameters[i].enable_delay_count);
+
+ reg &= ~UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(~0);
+ reg |= UTMIP_PLL_CFG1_XTAL_FREQ_COUNT(
+ utmi_parameters[i].xtal_freq_count);
+
+ /* Remove power downs from UTMIP PLL control bits */
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ENABLE_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLL_ACTIVE_POWERDOWN;
+ reg &= ~UTMIP_PLL_CFG1_FORCE_PLLU_POWERDOWN;
+
+ clk_writel(reg, UTMIP_PLL_CFG1);
+}
+
+static void tegra30_pll_clk_init(struct clk *c)
+{
+ u32 val = clk_readl(c->reg + PLL_BASE);
+
+ c->state = (val & PLL_BASE_ENABLE) ? ON : OFF;
+
+ if (c->flags & PLL_FIXED && !(val & PLL_BASE_OVERRIDE)) {
+ const struct clk_pll_freq_table *sel;
+ unsigned long input_rate = clk_get_rate(c->parent);
+ for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
+ if (sel->input_rate == input_rate &&
+ sel->output_rate == c->u.pll.fixed_rate) {
+ c->mul = sel->n;
+ c->div = sel->m * sel->p;
+ return;
+ }
+ }
+ pr_err("Clock %s has unknown fixed frequency\n", c->name);
+ BUG();
+ } else if (val & PLL_BASE_BYPASS) {
+ c->mul = 1;
+ c->div = 1;
+ } else {
+ c->mul = (val & PLL_BASE_DIVN_MASK) >> PLL_BASE_DIVN_SHIFT;
+ c->div = (val & PLL_BASE_DIVM_MASK) >> PLL_BASE_DIVM_SHIFT;
+ if (c->flags & PLLU)
+ c->div *= (val & PLLU_BASE_POST_DIV) ? 1 : 2;
+ else
+ c->div *= (0x1 << ((val & PLL_BASE_DIVP_MASK) >>
+ PLL_BASE_DIVP_SHIFT));
+ if (c->flags & PLL_FIXED) {
+ unsigned long rate = clk_get_rate_locked(c);
+ BUG_ON(rate != c->u.pll.fixed_rate);
+ }
+ }
+
+ if (c->flags & PLLU)
+ tegra30_utmi_param_configure(c);
+}
+
+static int tegra30_pll_clk_enable(struct clk *c)
+{
+ u32 val;
+ pr_debug("%s on clock %s\n", __func__, c->name);
+
+#if USE_PLL_LOCK_BITS
+ val = clk_readl(c->reg + PLL_MISC(c));
+ val |= PLL_MISC_LOCK_ENABLE(c);
+ clk_writel(val, c->reg + PLL_MISC(c));
+#endif
+ val = clk_readl(c->reg + PLL_BASE);
+ val &= ~PLL_BASE_BYPASS;
+ val |= PLL_BASE_ENABLE;
+ clk_writel(val, c->reg + PLL_BASE);
+
+ if (c->flags & PLLM) {
+ val = pmc_readl(PMC_PLLP_WB0_OVERRIDE);
+ val |= PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE;
+ pmc_writel(val, PMC_PLLP_WB0_OVERRIDE);
+ }
+
+ tegra30_pll_clk_wait_for_lock(c, c->reg + PLL_BASE, PLL_BASE_LOCK);
+
+ return 0;
+}
+
+static void tegra30_pll_clk_disable(struct clk *c)
+{
+ u32 val;
+ pr_debug("%s on clock %s\n", __func__, c->name);
+
+ val = clk_readl(c->reg);
+ val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
+ clk_writel(val, c->reg);
+
+ if (c->flags & PLLM) {
+ val = pmc_readl(PMC_PLLP_WB0_OVERRIDE);
+ val &= ~PMC_PLLP_WB0_OVERRIDE_PLLM_ENABLE;
+ pmc_writel(val, PMC_PLLP_WB0_OVERRIDE);
+ }
+}
+
+static int tegra30_pll_clk_set_rate(struct clk *c, unsigned long rate)
+{
+ u32 val, p_div, old_base;
+ unsigned long input_rate;
+ const struct clk_pll_freq_table *sel;
+ struct clk_pll_freq_table cfg;
+
+ pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+
+ if (c->flags & PLL_FIXED) {
+ int ret = 0;
+ if (rate != c->u.pll.fixed_rate) {
+ pr_err("%s: Can not change %s fixed rate %lu to %lu\n",
+ __func__, c->name, c->u.pll.fixed_rate, rate);
+ ret = -EINVAL;
+ }
+ return ret;
+ }
+
+ if (c->flags & PLLM) {
+ if (rate != clk_get_rate_locked(c)) {
+ pr_err("%s: Can not change memory %s rate in flight\n",
+ __func__, c->name);
+ return -EINVAL;
+ }
+ return 0;
+ }
+
+ p_div = 0;
+ input_rate = clk_get_rate(c->parent);
+
+ /* Check if the target rate is tabulated */
+ for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
+ if (sel->input_rate == input_rate && sel->output_rate == rate) {
+ if (c->flags & PLLU) {
+ BUG_ON(sel->p < 1 || sel->p > 2);
+ if (sel->p == 1)
+ p_div = PLLU_BASE_POST_DIV;
+ } else {
+ BUG_ON(sel->p < 1);
+ for (val = sel->p; val > 1; val >>= 1)
+ p_div++;
+ p_div <<= PLL_BASE_DIVP_SHIFT;
+ }
+ break;
+ }
+ }
+
+ /* Configure out-of-table rate */
+ if (sel->input_rate == 0) {
+ unsigned long cfreq;
+ BUG_ON(c->flags & PLLU);
+ sel = &cfg;
+
+ switch (input_rate) {
+ case 12000000:
+ case 26000000:
+ cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2000000;
+ break;
+ case 13000000:
+ cfreq = (rate <= 1000000 * 1000) ? 1000000 : 2600000;
+ break;
+ case 16800000:
+ case 19200000:
+ cfreq = (rate <= 1200000 * 1000) ? 1200000 : 2400000;
+ break;
+ default:
+ pr_err("%s: Unexpected reference rate %lu\n",
+ __func__, input_rate);
+ BUG();
+ }
+
+ /* Raise VCO to guarantee 0.5% accuracy */
+ for (cfg.output_rate = rate; cfg.output_rate < 200 * cfreq;
+ cfg.output_rate <<= 1)
+ p_div++;
+
+ cfg.p = 0x1 << p_div;
+ cfg.m = input_rate / cfreq;
+ cfg.n = cfg.output_rate / cfreq;
+ cfg.cpcon = OUT_OF_TABLE_CPCON;
+
+ if ((cfg.m > (PLL_BASE_DIVM_MASK >> PLL_BASE_DIVM_SHIFT)) ||
+ (cfg.n > (PLL_BASE_DIVN_MASK >> PLL_BASE_DIVN_SHIFT)) ||
+ (p_div > (PLL_BASE_DIVP_MASK >> PLL_BASE_DIVP_SHIFT)) ||
+ (cfg.output_rate > c->u.pll.vco_max)) {
+ pr_err("%s: Failed to set %s out-of-table rate %lu\n",
+ __func__, c->name, rate);
+ return -EINVAL;
+ }
+ p_div <<= PLL_BASE_DIVP_SHIFT;
+ }
+
+ c->mul = sel->n;
+ c->div = sel->m * sel->p;
+
+ old_base = val = clk_readl(c->reg + PLL_BASE);
+ val &= ~(PLL_BASE_DIVM_MASK | PLL_BASE_DIVN_MASK |
+ ((c->flags & PLLU) ? PLLU_BASE_POST_DIV : PLL_BASE_DIVP_MASK));
+ val |= (sel->m << PLL_BASE_DIVM_SHIFT) |
+ (sel->n << PLL_BASE_DIVN_SHIFT) | p_div;
+ if (val == old_base)
+ return 0;
+
+ if (c->state == ON) {
+ tegra30_pll_clk_disable(c);
+ val &= ~(PLL_BASE_BYPASS | PLL_BASE_ENABLE);
+ }
+ clk_writel(val, c->reg + PLL_BASE);
+
+ if (c->flags & PLL_HAS_CPCON) {
+ val = clk_readl(c->reg + PLL_MISC(c));
+ val &= ~PLL_MISC_CPCON_MASK;
+ val |= sel->cpcon << PLL_MISC_CPCON_SHIFT;
+ if (c->flags & (PLLU | PLLD)) {
+ val &= ~PLL_MISC_LFCON_MASK;
+ if (sel->n >= PLLDU_LFCON_SET_DIVN)
+ val |= 0x1 << PLL_MISC_LFCON_SHIFT;
+ } else if (c->flags & (PLLX | PLLM)) {
+ val &= ~(0x1 << PLL_MISC_DCCON_SHIFT);
+ if (rate >= (c->u.pll.vco_max >> 1))
+ val |= 0x1 << PLL_MISC_DCCON_SHIFT;
+ }
+ clk_writel(val, c->reg + PLL_MISC(c));
+ }
+
+ if (c->state == ON)
+ tegra30_pll_clk_enable(c);
+
+ return 0;
+}
+
+static struct clk_ops tegra_pll_ops = {
+ .init = tegra30_pll_clk_init,
+ .enable = tegra30_pll_clk_enable,
+ .disable = tegra30_pll_clk_disable,
+ .set_rate = tegra30_pll_clk_set_rate,
+};
+
+static int
+tegra30_plld_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+{
+ u32 val, mask, reg;
+
+ switch (p) {
+ case TEGRA_CLK_PLLD_CSI_OUT_ENB:
+ mask = PLLD_BASE_CSI_CLKENABLE;
+ reg = c->reg + PLL_BASE;
+ break;
+ case TEGRA_CLK_PLLD_DSI_OUT_ENB:
+ mask = PLLD_MISC_DSI_CLKENABLE;
+ reg = c->reg + PLL_MISC(c);
+ break;
+ case TEGRA_CLK_PLLD_MIPI_MUX_SEL:
+ if (!(c->flags & PLL_ALT_MISC_REG)) {
+ mask = PLLD_BASE_DSIB_MUX_MASK;
+ reg = c->reg + PLL_BASE;
+ break;
+ }
+ /* fall through - error since PLLD2 does not have MUX_SEL control */
+ default:
+ return -EINVAL;
+ }
+
+ val = clk_readl(reg);
+ if (setting)
+ val |= mask;
+ else
+ val &= ~mask;
+ clk_writel(val, reg);
+ return 0;
+}
+
+static struct clk_ops tegra_plld_ops = {
+ .init = tegra30_pll_clk_init,
+ .enable = tegra30_pll_clk_enable,
+ .disable = tegra30_pll_clk_disable,
+ .set_rate = tegra30_pll_clk_set_rate,
+ .clk_cfg_ex = tegra30_plld_clk_cfg_ex,
+};
+
+static void tegra30_plle_clk_init(struct clk *c)
+{
+ u32 val;
+
+ val = clk_readl(PLLE_AUX);
+ c->parent = (val & PLLE_AUX_PLLP_SEL) ?
+ tegra_get_clock_by_name("pll_p") :
+ tegra_get_clock_by_name("pll_ref");
+
+ val = clk_readl(c->reg + PLL_BASE);
+ c->state = (val & PLLE_BASE_ENABLE) ? ON : OFF;
+ c->mul = (val & PLLE_BASE_DIVN_MASK) >> PLLE_BASE_DIVN_SHIFT;
+ c->div = (val & PLLE_BASE_DIVM_MASK) >> PLLE_BASE_DIVM_SHIFT;
+ c->div *= (val & PLLE_BASE_DIVP_MASK) >> PLLE_BASE_DIVP_SHIFT;
+}
+
+static void tegra30_plle_clk_disable(struct clk *c)
+{
+ u32 val;
+ pr_debug("%s on clock %s\n", __func__, c->name);
+
+ val = clk_readl(c->reg + PLL_BASE);
+ val &= ~(PLLE_BASE_CML_ENABLE | PLLE_BASE_ENABLE);
+ clk_writel(val, c->reg + PLL_BASE);
+}
+
+static void tegra30_plle_training(struct clk *c)
+{
+ u32 val;
+
+ /* PLLE is already disabled, and setup cleared;
+ * create falling edge on PLLE IDDQ input */
+ val = pmc_readl(PMC_SATA_PWRGT);
+ val |= PMC_SATA_PWRGT_PLLE_IDDQ_VALUE;
+ pmc_writel(val, PMC_SATA_PWRGT);
+
+ val = pmc_readl(PMC_SATA_PWRGT);
+ val |= PMC_SATA_PWRGT_PLLE_IDDQ_SWCTL;
+ pmc_writel(val, PMC_SATA_PWRGT);
+
+ val = pmc_readl(PMC_SATA_PWRGT);
+ val &= ~PMC_SATA_PWRGT_PLLE_IDDQ_VALUE;
+ pmc_writel(val, PMC_SATA_PWRGT);
+
+ do {
+ val = clk_readl(c->reg + PLL_MISC(c));
+ } while (!(val & PLLE_MISC_READY));
+}
+
+static int tegra30_plle_configure(struct clk *c, bool force_training)
+{
+ u32 val;
+ const struct clk_pll_freq_table *sel;
+ unsigned long rate = c->u.pll.fixed_rate;
+ unsigned long input_rate = clk_get_rate(c->parent);
+
+ for (sel = c->u.pll.freq_table; sel->input_rate != 0; sel++) {
+ if (sel->input_rate == input_rate && sel->output_rate == rate)
+ break;
+ }
+
+ if (sel->input_rate == 0)
+ return -ENOSYS;
+
+ /* disable PLLE, clear setup fiels */
+ tegra30_plle_clk_disable(c);
+
+ val = clk_readl(c->reg + PLL_MISC(c));
+ val &= ~(PLLE_MISC_LOCK_ENABLE | PLLE_MISC_SETUP_MASK);
+ clk_writel(val, c->reg + PLL_MISC(c));
+
+ /* training */
+ val = clk_readl(c->reg + PLL_MISC(c));
+ if (force_training || (!(val & PLLE_MISC_READY)))
+ tegra30_plle_training(c);
+
+ /* configure dividers, setup, disable SS */
+ val = clk_readl(c->reg + PLL_BASE);
+ val &= ~PLLE_BASE_DIV_MASK;
+ val |= PLLE_BASE_DIV(sel->m, sel->n, sel->p, sel->cpcon);
+ clk_writel(val, c->reg + PLL_BASE);
+ c->mul = sel->n;
+ c->div = sel->m * sel->p;
+
+ val = clk_readl(c->reg + PLL_MISC(c));
+ val |= PLLE_MISC_SETUP_VALUE;
+ val |= PLLE_MISC_LOCK_ENABLE;
+ clk_writel(val, c->reg + PLL_MISC(c));
+
+ val = clk_readl(PLLE_SS_CTRL);
+ val |= PLLE_SS_DISABLE;
+ clk_writel(val, PLLE_SS_CTRL);
+
+ /* enable and lock PLLE*/
+ val = clk_readl(c->reg + PLL_BASE);
+ val |= (PLLE_BASE_CML_ENABLE | PLLE_BASE_ENABLE);
+ clk_writel(val, c->reg + PLL_BASE);
+
+ tegra30_pll_clk_wait_for_lock(c, c->reg + PLL_MISC(c), PLLE_MISC_LOCK);
+
+ return 0;
+}
+
+static int tegra30_plle_clk_enable(struct clk *c)
+{
+ pr_debug("%s on clock %s\n", __func__, c->name);
+ return tegra30_plle_configure(c, !c->set);
+}
+
+static struct clk_ops tegra_plle_ops = {
+ .init = tegra30_plle_clk_init,
+ .enable = tegra30_plle_clk_enable,
+ .disable = tegra30_plle_clk_disable,
+};
+
+/* Clock divider ops */
+static void tegra30_pll_div_clk_init(struct clk *c)
+{
+ if (c->flags & DIV_U71) {
+ u32 divu71;
+ u32 val = clk_readl(c->reg);
+ val >>= c->reg_shift;
+ c->state = (val & PLL_OUT_CLKEN) ? ON : OFF;
+ if (!(val & PLL_OUT_RESET_DISABLE))
+ c->state = OFF;
+
+ divu71 = (val & PLL_OUT_RATIO_MASK) >> PLL_OUT_RATIO_SHIFT;
+ c->div = (divu71 + 2);
+ c->mul = 2;
+ } else if (c->flags & DIV_2) {
+ c->state = ON;
+ if (c->flags & (PLLD | PLLX)) {
+ c->div = 2;
+ c->mul = 1;
+ } else
+ BUG();
+ } else {
+ c->state = ON;
+ c->div = 1;
+ c->mul = 1;
+ }
+}
+
+static int tegra30_pll_div_clk_enable(struct clk *c)
+{
+ u32 val;
+ u32 new_val;
+
+ pr_debug("%s: %s\n", __func__, c->name);
+ if (c->flags & DIV_U71) {
+ val = clk_readl(c->reg);
+ new_val = val >> c->reg_shift;
+ new_val &= 0xFFFF;
+
+ new_val |= PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE;
+
+ val &= ~(0xFFFF << c->reg_shift);
+ val |= new_val << c->reg_shift;
+ clk_writel_delay(val, c->reg);
+ return 0;
+ } else if (c->flags & DIV_2) {
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static void tegra30_pll_div_clk_disable(struct clk *c)
+{
+ u32 val;
+ u32 new_val;
+
+ pr_debug("%s: %s\n", __func__, c->name);
+ if (c->flags & DIV_U71) {
+ val = clk_readl(c->reg);
+ new_val = val >> c->reg_shift;
+ new_val &= 0xFFFF;
+
+ new_val &= ~(PLL_OUT_CLKEN | PLL_OUT_RESET_DISABLE);
+
+ val &= ~(0xFFFF << c->reg_shift);
+ val |= new_val << c->reg_shift;
+ clk_writel_delay(val, c->reg);
+ }
+}
+
+static int tegra30_pll_div_clk_set_rate(struct clk *c, unsigned long rate)
+{
+ u32 val;
+ u32 new_val;
+ int divider_u71;
+ unsigned long parent_rate = clk_get_rate(c->parent);
+
+ pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+ if (c->flags & DIV_U71) {
+ divider_u71 = clk_div71_get_divider(
+ parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
+ if (divider_u71 >= 0) {
+ val = clk_readl(c->reg);
+ new_val = val >> c->reg_shift;
+ new_val &= 0xFFFF;
+ if (c->flags & DIV_U71_FIXED)
+ new_val |= PLL_OUT_OVERRIDE;
+ new_val &= ~PLL_OUT_RATIO_MASK;
+ new_val |= divider_u71 << PLL_OUT_RATIO_SHIFT;
+
+ val &= ~(0xFFFF << c->reg_shift);
+ val |= new_val << c->reg_shift;
+ clk_writel_delay(val, c->reg);
+ c->div = divider_u71 + 2;
+ c->mul = 2;
+ return 0;
+ }
+ } else if (c->flags & DIV_2)
+ return clk_set_rate(c->parent, rate * 2);
+
+ return -EINVAL;
+}
+
+static long tegra30_pll_div_clk_round_rate(struct clk *c, unsigned long rate)
+{
+ int divider;
+ unsigned long parent_rate = clk_get_rate(c->parent);
+ pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+
+ if (c->flags & DIV_U71) {
+ divider = clk_div71_get_divider(
+ parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
+ if (divider < 0)
+ return divider;
+ return DIV_ROUND_UP(parent_rate * 2, divider + 2);
+ } else if (c->flags & DIV_2)
+ /* no rounding - fixed DIV_2 dividers pass rate to parent PLL */
+ return rate;
+
+ return -EINVAL;
+}
+
+static struct clk_ops tegra_pll_div_ops = {
+ .init = tegra30_pll_div_clk_init,
+ .enable = tegra30_pll_div_clk_enable,
+ .disable = tegra30_pll_div_clk_disable,
+ .set_rate = tegra30_pll_div_clk_set_rate,
+ .round_rate = tegra30_pll_div_clk_round_rate,
+};
+
+/* Periph clk ops */
+static inline u32 periph_clk_source_mask(struct clk *c)
+{
+ if (c->flags & MUX8)
+ return 7 << 29;
+ else if (c->flags & MUX_PWM)
+ return 3 << 28;
+ else if (c->flags & MUX_CLK_OUT)
+ return 3 << (c->u.periph.clk_num + 4);
+ else if (c->flags & PLLD)
+ return PLLD_BASE_DSIB_MUX_MASK;
+ else
+ return 3 << 30;
+}
+
+static inline u32 periph_clk_source_shift(struct clk *c)
+{
+ if (c->flags & MUX8)
+ return 29;
+ else if (c->flags & MUX_PWM)
+ return 28;
+ else if (c->flags & MUX_CLK_OUT)
+ return c->u.periph.clk_num + 4;
+ else if (c->flags & PLLD)
+ return PLLD_BASE_DSIB_MUX_SHIFT;
+ else
+ return 30;
+}
+
+static void tegra30_periph_clk_init(struct clk *c)
+{
+ u32 val = clk_readl(c->reg);
+ const struct clk_mux_sel *mux = 0;
+ const struct clk_mux_sel *sel;
+ if (c->flags & MUX) {
+ for (sel = c->inputs; sel->input != NULL; sel++) {
+ if (((val & periph_clk_source_mask(c)) >>
+ periph_clk_source_shift(c)) == sel->value)
+ mux = sel;
+ }
+ BUG_ON(!mux);
+
+ c->parent = mux->input;
+ } else {
+ c->parent = c->inputs[0].input;
+ }
+
+ if (c->flags & DIV_U71) {
+ u32 divu71 = val & PERIPH_CLK_SOURCE_DIVU71_MASK;
+ if ((c->flags & DIV_U71_UART) &&
+ (!(val & PERIPH_CLK_UART_DIV_ENB))) {
+ divu71 = 0;
+ }
+ if (c->flags & DIV_U71_IDLE) {
+ val &= ~(PERIPH_CLK_SOURCE_DIVU71_MASK <<
+ PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
+ val |= (PERIPH_CLK_SOURCE_DIVIDLE_VAL <<
+ PERIPH_CLK_SOURCE_DIVIDLE_SHIFT);
+ clk_writel(val, c->reg);
+ }
+ c->div = divu71 + 2;
+ c->mul = 2;
+ } else if (c->flags & DIV_U16) {
+ u32 divu16 = val & PERIPH_CLK_SOURCE_DIVU16_MASK;
+ c->div = divu16 + 1;
+ c->mul = 1;
+ } else {
+ c->div = 1;
+ c->mul = 1;
+ }
+
+ c->state = ON;
+ if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c)))
+ c->state = OFF;
+ if (!(c->flags & PERIPH_NO_RESET))
+ if (clk_readl(PERIPH_CLK_TO_RST_REG(c)) & PERIPH_CLK_TO_BIT(c))
+ c->state = OFF;
+}
+
+static int tegra30_periph_clk_enable(struct clk *c)
+{
+ pr_debug("%s on clock %s\n", __func__, c->name);
+
+ tegra_periph_clk_enable_refcount[c->u.periph.clk_num]++;
+ if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] > 1)
+ return 0;
+
+ clk_writel_delay(PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_SET_REG(c));
+ if (!(c->flags & PERIPH_NO_RESET) &&
+ !(c->flags & PERIPH_MANUAL_RESET)) {
+ if (clk_readl(PERIPH_CLK_TO_RST_REG(c)) &
+ PERIPH_CLK_TO_BIT(c)) {
+ udelay(5); /* reset propagation delay */
+ clk_writel(PERIPH_CLK_TO_BIT(c),
+ PERIPH_CLK_TO_RST_CLR_REG(c));
+ }
+ }
+ return 0;
+}
+
+static void tegra30_periph_clk_disable(struct clk *c)
+{
+ unsigned long val;
+ pr_debug("%s on clock %s\n", __func__, c->name);
+
+ if (c->refcnt)
+ tegra_periph_clk_enable_refcount[c->u.periph.clk_num]--;
+
+ if (tegra_periph_clk_enable_refcount[c->u.periph.clk_num] == 0) {
+ /* If peripheral is in the APB bus then read the APB bus to
+ * flush the write operation in apb bus. This will avoid the
+ * peripheral access after disabling clock*/
+ if (c->flags & PERIPH_ON_APB)
+ val = chipid_readl();
+
+ clk_writel_delay(
+ PERIPH_CLK_TO_BIT(c), PERIPH_CLK_TO_ENB_CLR_REG(c));
+ }
+}
+
+static void tegra30_periph_clk_reset(struct clk *c, bool assert)
+{
+ unsigned long val;
+ pr_debug("%s %s on clock %s\n", __func__,
+ assert ? "assert" : "deassert", c->name);
+
+ if (!(c->flags & PERIPH_NO_RESET)) {
+ if (assert) {
+ /* If peripheral is in the APB bus then read the APB
+ * bus to flush the write operation in apb bus. This
+ * will avoid the peripheral access after disabling
+ * clock */
+ if (c->flags & PERIPH_ON_APB)
+ val = chipid_readl();
+
+ clk_writel(PERIPH_CLK_TO_BIT(c),
+ PERIPH_CLK_TO_RST_SET_REG(c));
+ } else
+ clk_writel(PERIPH_CLK_TO_BIT(c),
+ PERIPH_CLK_TO_RST_CLR_REG(c));
+ }
+}
+
+static int tegra30_periph_clk_set_parent(struct clk *c, struct clk *p)
+{
+ u32 val;
+ const struct clk_mux_sel *sel;
+ pr_debug("%s: %s %s\n", __func__, c->name, p->name);
+
+ if (!(c->flags & MUX))
+ return (p == c->parent) ? 0 : (-EINVAL);
+
+ for (sel = c->inputs; sel->input != NULL; sel++) {
+ if (sel->input == p) {
+ val = clk_readl(c->reg);
+ val &= ~periph_clk_source_mask(c);
+ val |= (sel->value << periph_clk_source_shift(c));
+
+ if (c->refcnt)
+ clk_enable(p);
+
+ clk_writel_delay(val, c->reg);
+
+ if (c->refcnt && c->parent)
+ clk_disable(c->parent);
+
+ clk_reparent(c, p);
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int tegra30_periph_clk_set_rate(struct clk *c, unsigned long rate)
+{
+ u32 val;
+ int divider;
+ unsigned long parent_rate = clk_get_rate(c->parent);
+
+ if (c->flags & DIV_U71) {
+ divider = clk_div71_get_divider(
+ parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
+ if (divider >= 0) {
+ val = clk_readl(c->reg);
+ val &= ~PERIPH_CLK_SOURCE_DIVU71_MASK;
+ val |= divider;
+ if (c->flags & DIV_U71_UART) {
+ if (divider)
+ val |= PERIPH_CLK_UART_DIV_ENB;
+ else
+ val &= ~PERIPH_CLK_UART_DIV_ENB;
+ }
+ clk_writel_delay(val, c->reg);
+ c->div = divider + 2;
+ c->mul = 2;
+ return 0;
+ }
+ } else if (c->flags & DIV_U16) {
+ divider = clk_div16_get_divider(parent_rate, rate);
+ if (divider >= 0) {
+ val = clk_readl(c->reg);
+ val &= ~PERIPH_CLK_SOURCE_DIVU16_MASK;
+ val |= divider;
+ clk_writel_delay(val, c->reg);
+ c->div = divider + 1;
+ c->mul = 1;
+ return 0;
+ }
+ } else if (parent_rate <= rate) {
+ c->div = 1;
+ c->mul = 1;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static long tegra30_periph_clk_round_rate(struct clk *c,
+ unsigned long rate)
+{
+ int divider;
+ unsigned long parent_rate = clk_get_rate(c->parent);
+ pr_debug("%s: %s %lu\n", __func__, c->name, rate);
+
+ if (c->flags & DIV_U71) {
+ divider = clk_div71_get_divider(
+ parent_rate, rate, c->flags, ROUND_DIVIDER_UP);
+ if (divider < 0)
+ return divider;
+
+ return DIV_ROUND_UP(parent_rate * 2, divider + 2);
+ } else if (c->flags & DIV_U16) {
+ divider = clk_div16_get_divider(parent_rate, rate);
+ if (divider < 0)
+ return divider;
+ return DIV_ROUND_UP(parent_rate, divider + 1);
+ }
+ return -EINVAL;
+}
+
+static struct clk_ops tegra_periph_clk_ops = {
+ .init = &tegra30_periph_clk_init,
+ .enable = &tegra30_periph_clk_enable,
+ .disable = &tegra30_periph_clk_disable,
+ .set_parent = &tegra30_periph_clk_set_parent,
+ .set_rate = &tegra30_periph_clk_set_rate,
+ .round_rate = &tegra30_periph_clk_round_rate,
+ .reset = &tegra30_periph_clk_reset,
+};
+
+
+/* Periph extended clock configuration ops */
+static int
+tegra30_vi_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+{
+ if (p == TEGRA_CLK_VI_INP_SEL) {
+ u32 val = clk_readl(c->reg);
+ val &= ~PERIPH_CLK_VI_SEL_EX_MASK;
+ val |= (setting << PERIPH_CLK_VI_SEL_EX_SHIFT) &
+ PERIPH_CLK_VI_SEL_EX_MASK;
+ clk_writel(val, c->reg);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static struct clk_ops tegra_vi_clk_ops = {
+ .init = &tegra30_periph_clk_init,
+ .enable = &tegra30_periph_clk_enable,
+ .disable = &tegra30_periph_clk_disable,
+ .set_parent = &tegra30_periph_clk_set_parent,
+ .set_rate = &tegra30_periph_clk_set_rate,
+ .round_rate = &tegra30_periph_clk_round_rate,
+ .clk_cfg_ex = &tegra30_vi_clk_cfg_ex,
+ .reset = &tegra30_periph_clk_reset,
+};
+
+static int
+tegra30_nand_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+{
+ if (p == TEGRA_CLK_NAND_PAD_DIV2_ENB) {
+ u32 val = clk_readl(c->reg);
+ if (setting)
+ val |= PERIPH_CLK_NAND_DIV_EX_ENB;
+ else
+ val &= ~PERIPH_CLK_NAND_DIV_EX_ENB;
+ clk_writel(val, c->reg);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static struct clk_ops tegra_nand_clk_ops = {
+ .init = &tegra30_periph_clk_init,
+ .enable = &tegra30_periph_clk_enable,
+ .disable = &tegra30_periph_clk_disable,
+ .set_parent = &tegra30_periph_clk_set_parent,
+ .set_rate = &tegra30_periph_clk_set_rate,
+ .round_rate = &tegra30_periph_clk_round_rate,
+ .clk_cfg_ex = &tegra30_nand_clk_cfg_ex,
+ .reset = &tegra30_periph_clk_reset,
+};
+
+
+static int
+tegra30_dtv_clk_cfg_ex(struct clk *c, enum tegra_clk_ex_param p, u32 setting)
+{
+ if (p == TEGRA_CLK_DTV_INVERT) {
+ u32 val = clk_readl(c->reg);
+ if (setting)
+ val |= PERIPH_CLK_DTV_POLARITY_INV;
+ else
+ val &= ~PERIPH_CLK_DTV_POLARITY_INV;
+ clk_writel(val, c->reg);
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static struct clk_ops tegra_dtv_clk_ops = {
+ .init = &tegra30_periph_clk_init,
+ .enable = &tegra30_periph_clk_enable,
+ .disable = &tegra30_periph_clk_disable,
+ .set_parent = &tegra30_periph_clk_set_parent,
+ .set_rate = &tegra30_periph_clk_set_rate,
+ .round_rate = &tegra30_periph_clk_round_rate,
+ .clk_cfg_ex = &tegra30_dtv_clk_cfg_ex,
+ .reset = &tegra30_periph_clk_reset,
+};
+
+static int tegra30_dsib_clk_set_parent(struct clk *c, struct clk *p)
+{
+ const struct clk_mux_sel *sel;
+ struct clk *d = tegra_get_clock_by_name("pll_d");
+
+ pr_debug("%s: %s %s\n", __func__, c->name, p->name);
+
+ for (sel = c->inputs; sel->input != NULL; sel++) {
+ if (sel->input == p) {
+ if (c->refcnt)
+ clk_enable(p);
+
+ /* The DSIB parent selection bit is in PLLD base
+ register - can not do direct r-m-w, must be
+ protected by PLLD lock */
+ tegra_clk_cfg_ex(
+ d, TEGRA_CLK_PLLD_MIPI_MUX_SEL, sel->value);
+
+ if (c->refcnt && c->parent)
+ clk_disable(c->parent);
+
+ clk_reparent(c, p);
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static struct clk_ops tegra_dsib_clk_ops = {
+ .init = &tegra30_periph_clk_init,
+ .enable = &tegra30_periph_clk_enable,
+ .disable = &tegra30_periph_clk_disable,
+ .set_parent = &tegra30_dsib_clk_set_parent,
+ .set_rate = &tegra30_periph_clk_set_rate,
+ .round_rate = &tegra30_periph_clk_round_rate,
+ .reset = &tegra30_periph_clk_reset,
+};
+
+/* pciex clock support only reset function */
+static struct clk_ops tegra_pciex_clk_ops = {
+ .reset = tegra30_periph_clk_reset,
+};
+
+/* Output clock ops */
+
+static DEFINE_SPINLOCK(clk_out_lock);
+
+static void tegra30_clk_out_init(struct clk *c)
+{
+ const struct clk_mux_sel *mux = 0;
+ const struct clk_mux_sel *sel;
+ u32 val = pmc_readl(c->reg);
+
+ c->state = (val & (0x1 << c->u.periph.clk_num)) ? ON : OFF;
+ c->mul = 1;
+ c->div = 1;
+
+ for (sel = c->inputs; sel->input != NULL; sel++) {
+ if (((val & periph_clk_source_mask(c)) >>
+ periph_clk_source_shift(c)) == sel->value)
+ mux = sel;
+ }
+ BUG_ON(!mux);
+ c->parent = mux->input;
+}
+
+static int tegra30_clk_out_enable(struct clk *c)
+{
+ u32 val;
+ unsigned long flags;
+
+ pr_debug("%s on clock %s\n", __func__, c->name);
+
+ spin_lock_irqsave(&clk_out_lock, flags);
+ val = pmc_readl(c->reg);
+ val |= (0x1 << c->u.periph.clk_num);
+ pmc_writel(val, c->reg);
+ spin_unlock_irqrestore(&clk_out_lock, flags);
+
+ return 0;
+}
+
+static void tegra30_clk_out_disable(struct clk *c)
+{
+ u32 val;
+ unsigned long flags;
+
+ pr_debug("%s on clock %s\n", __func__, c->name);
+
+ spin_lock_irqsave(&clk_out_lock, flags);
+ val = pmc_readl(c->reg);
+ val &= ~(0x1 << c->u.periph.clk_num);
+ pmc_writel(val, c->reg);
+ spin_unlock_irqrestore(&clk_out_lock, flags);
+}
+
+static int tegra30_clk_out_set_parent(struct clk *c, struct clk *p)
+{
+ u32 val;
+ unsigned long flags;
+ const struct clk_mux_sel *sel;
+
+ pr_debug("%s: %s %s\n", __func__, c->name, p->name);
+
+ for (sel = c->inputs; sel->input != NULL; sel++) {
+ if (sel->input == p) {
+ if (c->refcnt)
+ clk_enable(p);
+
+ spin_lock_irqsave(&clk_out_lock, flags);
+ val = pmc_readl(c->reg);
+ val &= ~periph_clk_source_mask(c);
+ val |= (sel->value << periph_clk_source_shift(c));
+ pmc_writel(val, c->reg);
+ spin_unlock_irqrestore(&clk_out_lock, flags);
+
+ if (c->refcnt && c->parent)
+ clk_disable(c->parent);
+
+ clk_reparent(c, p);
+ return 0;
+ }
+ }
+ return -EINVAL;
+}
+
+static struct clk_ops tegra_clk_out_ops = {
+ .init = &tegra30_clk_out_init,
+ .enable = &tegra30_clk_out_enable,
+ .disable = &tegra30_clk_out_disable,
+ .set_parent = &tegra30_clk_out_set_parent,
+};
+
+
+/* Clock doubler ops */
+static void tegra30_clk_double_init(struct clk *c)
+{
+ u32 val = clk_readl(c->reg);
+ c->mul = val & (0x1 << c->reg_shift) ? 1 : 2;
+ c->div = 1;
+ c->state = ON;
+ if (!(clk_readl(PERIPH_CLK_TO_ENB_REG(c)) & PERIPH_CLK_TO_BIT(c)))
+ c->state = OFF;
+};
+
+static int tegra30_clk_double_set_rate(struct clk *c, unsigned long rate)
+{
+ u32 val;
+ unsigned long parent_rate = clk_get_rate(c->parent);
+ if (rate == parent_rate) {
+ val = clk_readl(c->reg) | (0x1 << c->reg_shift);
+ clk_writel(val, c->reg);
+ c->mul = 1;
+ c->div = 1;
+ return 0;
+ } else if (rate == 2 * parent_rate) {
+ val = clk_readl(c->reg) & (~(0x1 << c->reg_shift));
+ clk_writel(val, c->reg);
+ c->mul = 2;
+ c->div = 1;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static struct clk_ops tegra_clk_double_ops = {
+ .init = &tegra30_clk_double_init,
+ .enable = &tegra30_periph_clk_enable,
+ .disable = &tegra30_periph_clk_disable,
+ .set_rate = &tegra30_clk_double_set_rate,
+};
+
+/* Audio sync clock ops */
+static int tegra30_sync_source_set_rate(struct clk *c, unsigned long rate)
+{
+ c->rate = rate;
+ return 0;
+}
+
+static struct clk_ops tegra_sync_source_ops = {
+ .set_rate = &tegra30_sync_source_set_rate,
+};
+
+static void tegra30_audio_sync_clk_init(struct clk *c)
+{
+ int source;
+ const struct clk_mux_sel *sel;
+ u32 val = clk_readl(c->reg);
+ c->state = (val & AUDIO_SYNC_DISABLE_BIT) ? OFF : ON;
+ source = val & AUDIO_SYNC_SOURCE_MASK;
+ for (sel = c->inputs; sel->input != NULL; sel++)
+ if (sel->value == source)
+ break;
+ BUG_ON(sel->input == NULL);
+ c->parent = sel->input;
+}
+
+static int tegra30_audio_sync_clk_enable(struct clk *c)
+{
+ u32 val = clk_readl(c->reg);
+ clk_writel((val & (~AUDIO_SYNC_DISABLE_BIT)), c->reg);
+ return 0;
+}
+
+static void tegra30_audio_sync_clk_disable(struct clk *c)
+{
+ u32 val = clk_readl(c->reg);
+ clk_writel((val | AUDIO_SYNC_DISABLE_BIT), c->reg);
+}
+
+static int tegra30_audio_sync_clk_set_parent(struct clk *c, struct clk *p)
+{
+ u32 val;
+ const struct clk_mux_sel *sel;
+ for (sel = c->inputs; sel->input != NULL; sel++) {
+ if (sel->input == p) {
+ val = clk_readl(c->reg);
+ val &= ~AUDIO_SYNC_SOURCE_MASK;
+ val |= sel->value;
+
+ if (c->refcnt)
+ clk_enable(p);
+
+ clk_writel(val, c->reg);
+
+ if (c->refcnt && c->parent)
+ clk_disable(c->parent);
+
+ clk_reparent(c, p);
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static struct clk_ops tegra_audio_sync_clk_ops = {
+ .init = tegra30_audio_sync_clk_init,
+ .enable = tegra30_audio_sync_clk_enable,
+ .disable = tegra30_audio_sync_clk_disable,
+ .set_parent = tegra30_audio_sync_clk_set_parent,
+};
+
+/* cml0 (pcie), and cml1 (sata) clock ops */
+static void tegra30_cml_clk_init(struct clk *c)
+{
+ u32 val = clk_readl(c->reg);
+ c->state = val & (0x1 << c->u.periph.clk_num) ? ON : OFF;
+}
+
+static int tegra30_cml_clk_enable(struct clk *c)
+{
+ u32 val = clk_readl(c->reg);
+ val |= (0x1 << c->u.periph.clk_num);
+ clk_writel(val, c->reg);
+ return 0;
+}
+
+static void tegra30_cml_clk_disable(struct clk *c)
+{
+ u32 val = clk_readl(c->reg);
+ val &= ~(0x1 << c->u.periph.clk_num);
+ clk_writel(val, c->reg);
+}
+
+static struct clk_ops tegra_cml_clk_ops = {
+ .init = &tegra30_cml_clk_init,
+ .enable = &tegra30_cml_clk_enable,
+ .disable = &tegra30_cml_clk_disable,
+};
+
+/* Clock definitions */
+static struct clk tegra_clk_32k = {
+ .name = "clk_32k",
+ .rate = 32768,
+ .ops = NULL,
+ .max_rate = 32768,
+};
+
+static struct clk tegra_clk_m = {
+ .name = "clk_m",
+ .flags = ENABLE_ON_INIT,
+ .ops = &tegra_clk_m_ops,
+ .reg = 0x1fc,
+ .reg_shift = 28,
+ .max_rate = 48000000,
+};
+
+static struct clk tegra_clk_m_div2 = {
+ .name = "clk_m_div2",
+ .ops = &tegra_clk_m_div_ops,
+ .parent = &tegra_clk_m,
+ .mul = 1,
+ .div = 2,
+ .state = ON,
+ .max_rate = 24000000,
+};
+
+static struct clk tegra_clk_m_div4 = {
+ .name = "clk_m_div4",
+ .ops = &tegra_clk_m_div_ops,
+ .parent = &tegra_clk_m,
+ .mul = 1,
+ .div = 4,
+ .state = ON,
+ .max_rate = 12000000,
+};
+
+static struct clk tegra_pll_ref = {
+ .name = "pll_ref",
+ .flags = ENABLE_ON_INIT,
+ .ops = &tegra_pll_ref_ops,
+ .parent = &tegra_clk_m,
+ .max_rate = 26000000,
+};
+
+static struct clk_pll_freq_table tegra_pll_c_freq_table[] = {
+ { 12000000, 1040000000, 520, 6, 1, 8},
+ { 13000000, 1040000000, 480, 6, 1, 8},
+ { 16800000, 1040000000, 495, 8, 1, 8}, /* actual: 1039.5 MHz */
+ { 19200000, 1040000000, 325, 6, 1, 6},
+ { 26000000, 1040000000, 520, 13, 1, 8},
+
+ { 12000000, 832000000, 416, 6, 1, 8},
+ { 13000000, 832000000, 832, 13, 1, 8},
+ { 16800000, 832000000, 396, 8, 1, 8}, /* actual: 831.6 MHz */
+ { 19200000, 832000000, 260, 6, 1, 8},
+ { 26000000, 832000000, 416, 13, 1, 8},
+
+ { 12000000, 624000000, 624, 12, 1, 8},
+ { 13000000, 624000000, 624, 13, 1, 8},
+ { 16800000, 600000000, 520, 14, 1, 8},
+ { 19200000, 624000000, 520, 16, 1, 8},
+ { 26000000, 624000000, 624, 26, 1, 8},
+
+ { 12000000, 600000000, 600, 12, 1, 8},
+ { 13000000, 600000000, 600, 13, 1, 8},
+ { 16800000, 600000000, 500, 14, 1, 8},
+ { 19200000, 600000000, 375, 12, 1, 6},
+ { 26000000, 600000000, 600, 26, 1, 8},
+
+ { 12000000, 520000000, 520, 12, 1, 8},
+ { 13000000, 520000000, 520, 13, 1, 8},
+ { 16800000, 520000000, 495, 16, 1, 8}, /* actual: 519.75 MHz */
+ { 19200000, 520000000, 325, 12, 1, 6},
+ { 26000000, 520000000, 520, 26, 1, 8},
+
+ { 12000000, 416000000, 416, 12, 1, 8},
+ { 13000000, 416000000, 416, 13, 1, 8},
+ { 16800000, 416000000, 396, 16, 1, 8}, /* actual: 415.8 MHz */
+ { 19200000, 416000000, 260, 12, 1, 6},
+ { 26000000, 416000000, 416, 26, 1, 8},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_c = {
+ .name = "pll_c",
+ .flags = PLL_HAS_CPCON,
+ .ops = &tegra_pll_ops,
+ .reg = 0x80,
+ .parent = &tegra_pll_ref,
+ .max_rate = 1400000000,
+ .u.pll = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 20000000,
+ .vco_max = 1400000000,
+ .freq_table = tegra_pll_c_freq_table,
+ .lock_delay = 300,
+ },
+};
+
+static struct clk tegra_pll_c_out1 = {
+ .name = "pll_c_out1",
+ .ops = &tegra_pll_div_ops,
+ .flags = DIV_U71,
+ .parent = &tegra_pll_c,
+ .reg = 0x84,
+ .reg_shift = 0,
+ .max_rate = 700000000,
+};
+
+static struct clk_pll_freq_table tegra_pll_m_freq_table[] = {
+ { 12000000, 666000000, 666, 12, 1, 8},
+ { 13000000, 666000000, 666, 13, 1, 8},
+ { 16800000, 666000000, 555, 14, 1, 8},
+ { 19200000, 666000000, 555, 16, 1, 8},
+ { 26000000, 666000000, 666, 26, 1, 8},
+ { 12000000, 600000000, 600, 12, 1, 8},
+ { 13000000, 600000000, 600, 13, 1, 8},
+ { 16800000, 600000000, 500, 14, 1, 8},
+ { 19200000, 600000000, 375, 12, 1, 6},
+ { 26000000, 600000000, 600, 26, 1, 8},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_m = {
+ .name = "pll_m",
+ .flags = PLL_HAS_CPCON | PLLM,
+ .ops = &tegra_pll_ops,
+ .reg = 0x90,
+ .parent = &tegra_pll_ref,
+ .max_rate = 800000000,
+ .u.pll = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 20000000,
+ .vco_max = 1200000000,
+ .freq_table = tegra_pll_m_freq_table,
+ .lock_delay = 300,
+ },
+};
+
+static struct clk tegra_pll_m_out1 = {
+ .name = "pll_m_out1",
+ .ops = &tegra_pll_div_ops,
+ .flags = DIV_U71,
+ .parent = &tegra_pll_m,
+ .reg = 0x94,
+ .reg_shift = 0,
+ .max_rate = 600000000,
+};
+
+static struct clk_pll_freq_table tegra_pll_p_freq_table[] = {
+ { 12000000, 216000000, 432, 12, 2, 8},
+ { 13000000, 216000000, 432, 13, 2, 8},
+ { 16800000, 216000000, 360, 14, 2, 8},
+ { 19200000, 216000000, 360, 16, 2, 8},
+ { 26000000, 216000000, 432, 26, 2, 8},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_p = {
+ .name = "pll_p",
+ .flags = ENABLE_ON_INIT | PLL_FIXED | PLL_HAS_CPCON,
+ .ops = &tegra_pll_ops,
+ .reg = 0xa0,
+ .parent = &tegra_pll_ref,
+ .max_rate = 432000000,
+ .u.pll = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 20000000,
+ .vco_max = 1400000000,
+ .freq_table = tegra_pll_p_freq_table,
+ .lock_delay = 300,
+ .fixed_rate = 408000000,
+ },
+};
+
+static struct clk tegra_pll_p_out1 = {
+ .name = "pll_p_out1",
+ .ops = &tegra_pll_div_ops,
+ .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+ .parent = &tegra_pll_p,
+ .reg = 0xa4,
+ .reg_shift = 0,
+ .max_rate = 432000000,
+};
+
+static struct clk tegra_pll_p_out2 = {
+ .name = "pll_p_out2",
+ .ops = &tegra_pll_div_ops,
+ .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+ .parent = &tegra_pll_p,
+ .reg = 0xa4,
+ .reg_shift = 16,
+ .max_rate = 432000000,
+};
+
+static struct clk tegra_pll_p_out3 = {
+ .name = "pll_p_out3",
+ .ops = &tegra_pll_div_ops,
+ .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+ .parent = &tegra_pll_p,
+ .reg = 0xa8,
+ .reg_shift = 0,
+ .max_rate = 432000000,
+};
+
+static struct clk tegra_pll_p_out4 = {
+ .name = "pll_p_out4",
+ .ops = &tegra_pll_div_ops,
+ .flags = ENABLE_ON_INIT | DIV_U71 | DIV_U71_FIXED,
+ .parent = &tegra_pll_p,
+ .reg = 0xa8,
+ .reg_shift = 16,
+ .max_rate = 432000000,
+};
+
+static struct clk_pll_freq_table tegra_pll_a_freq_table[] = {
+ { 9600000, 564480000, 294, 5, 1, 4},
+ { 9600000, 552960000, 288, 5, 1, 4},
+ { 9600000, 24000000, 5, 2, 1, 1},
+
+ { 28800000, 56448000, 49, 25, 1, 1},
+ { 28800000, 73728000, 64, 25, 1, 1},
+ { 28800000, 24000000, 5, 6, 1, 1},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_a = {
+ .name = "pll_a",
+ .flags = PLL_HAS_CPCON,
+ .ops = &tegra_pll_ops,
+ .reg = 0xb0,
+ .parent = &tegra_pll_p_out1,
+ .max_rate = 700000000,
+ .u.pll = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 20000000,
+ .vco_max = 1400000000,
+ .freq_table = tegra_pll_a_freq_table,
+ .lock_delay = 300,
+ },
+};
+
+static struct clk tegra_pll_a_out0 = {
+ .name = "pll_a_out0",
+ .ops = &tegra_pll_div_ops,
+ .flags = DIV_U71,
+ .parent = &tegra_pll_a,
+ .reg = 0xb4,
+ .reg_shift = 0,
+ .max_rate = 100000000,
+};
+
+static struct clk_pll_freq_table tegra_pll_d_freq_table[] = {
+ { 12000000, 216000000, 216, 12, 1, 4},
+ { 13000000, 216000000, 216, 13, 1, 4},
+ { 16800000, 216000000, 180, 14, 1, 4},
+ { 19200000, 216000000, 180, 16, 1, 4},
+ { 26000000, 216000000, 216, 26, 1, 4},
+
+ { 12000000, 594000000, 594, 12, 1, 8},
+ { 13000000, 594000000, 594, 13, 1, 8},
+ { 16800000, 594000000, 495, 14, 1, 8},
+ { 19200000, 594000000, 495, 16, 1, 8},
+ { 26000000, 594000000, 594, 26, 1, 8},
+
+ { 12000000, 1000000000, 1000, 12, 1, 12},
+ { 13000000, 1000000000, 1000, 13, 1, 12},
+ { 19200000, 1000000000, 625, 12, 1, 8},
+ { 26000000, 1000000000, 1000, 26, 1, 12},
+
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_d = {
+ .name = "pll_d",
+ .flags = PLL_HAS_CPCON | PLLD,
+ .ops = &tegra_plld_ops,
+ .reg = 0xd0,
+ .parent = &tegra_pll_ref,
+ .max_rate = 1000000000,
+ .u.pll = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 40000000,
+ .vco_max = 1000000000,
+ .freq_table = tegra_pll_d_freq_table,
+ .lock_delay = 1000,
+ },
+};
+
+static struct clk tegra_pll_d_out0 = {
+ .name = "pll_d_out0",
+ .ops = &tegra_pll_div_ops,
+ .flags = DIV_2 | PLLD,
+ .parent = &tegra_pll_d,
+ .max_rate = 500000000,
+};
+
+static struct clk tegra_pll_d2 = {
+ .name = "pll_d2",
+ .flags = PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLD,
+ .ops = &tegra_plld_ops,
+ .reg = 0x4b8,
+ .parent = &tegra_pll_ref,
+ .max_rate = 1000000000,
+ .u.pll = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 40000000,
+ .vco_max = 1000000000,
+ .freq_table = tegra_pll_d_freq_table,
+ .lock_delay = 1000,
+ },
+};
+
+static struct clk tegra_pll_d2_out0 = {
+ .name = "pll_d2_out0",
+ .ops = &tegra_pll_div_ops,
+ .flags = DIV_2 | PLLD,
+ .parent = &tegra_pll_d2,
+ .max_rate = 500000000,
+};
+
+static struct clk_pll_freq_table tegra_pll_u_freq_table[] = {
+ { 12000000, 480000000, 960, 12, 2, 12},
+ { 13000000, 480000000, 960, 13, 2, 12},
+ { 16800000, 480000000, 400, 7, 2, 5},
+ { 19200000, 480000000, 200, 4, 2, 3},
+ { 26000000, 480000000, 960, 26, 2, 12},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_u = {
+ .name = "pll_u",
+ .flags = PLL_HAS_CPCON | PLLU,
+ .ops = &tegra_pll_ops,
+ .reg = 0xc0,
+ .parent = &tegra_pll_ref,
+ .max_rate = 480000000,
+ .u.pll = {
+ .input_min = 2000000,
+ .input_max = 40000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 480000000,
+ .vco_max = 960000000,
+ .freq_table = tegra_pll_u_freq_table,
+ .lock_delay = 1000,
+ },
+};
+
+static struct clk_pll_freq_table tegra_pll_x_freq_table[] = {
+ /* 1.7 GHz */
+ { 12000000, 1700000000, 850, 6, 1, 8},
+ { 13000000, 1700000000, 915, 7, 1, 8}, /* actual: 1699.2 MHz */
+ { 16800000, 1700000000, 708, 7, 1, 8}, /* actual: 1699.2 MHz */
+ { 19200000, 1700000000, 885, 10, 1, 8}, /* actual: 1699.2 MHz */
+ { 26000000, 1700000000, 850, 13, 1, 8},
+
+ /* 1.6 GHz */
+ { 12000000, 1600000000, 800, 6, 1, 8},
+ { 13000000, 1600000000, 738, 6, 1, 8}, /* actual: 1599.0 MHz */
+ { 16800000, 1600000000, 857, 9, 1, 8}, /* actual: 1599.7 MHz */
+ { 19200000, 1600000000, 500, 6, 1, 8},
+ { 26000000, 1600000000, 800, 13, 1, 8},
+
+ /* 1.5 GHz */
+ { 12000000, 1500000000, 750, 6, 1, 8},
+ { 13000000, 1500000000, 923, 8, 1, 8}, /* actual: 1499.8 MHz */
+ { 16800000, 1500000000, 625, 7, 1, 8},
+ { 19200000, 1500000000, 625, 8, 1, 8},
+ { 26000000, 1500000000, 750, 13, 1, 8},
+
+ /* 1.4 GHz */
+ { 12000000, 1400000000, 700, 6, 1, 8},
+ { 13000000, 1400000000, 969, 9, 1, 8}, /* actual: 1399.7 MHz */
+ { 16800000, 1400000000, 1000, 12, 1, 8},
+ { 19200000, 1400000000, 875, 12, 1, 8},
+ { 26000000, 1400000000, 700, 13, 1, 8},
+
+ /* 1.3 GHz */
+ { 12000000, 1300000000, 975, 9, 1, 8},
+ { 13000000, 1300000000, 1000, 10, 1, 8},
+ { 16800000, 1300000000, 928, 12, 1, 8}, /* actual: 1299.2 MHz */
+ { 19200000, 1300000000, 812, 12, 1, 8}, /* actual: 1299.2 MHz */
+ { 26000000, 1300000000, 650, 13, 1, 8},
+
+ /* 1.2 GHz */
+ { 12000000, 1200000000, 1000, 10, 1, 8},
+ { 13000000, 1200000000, 923, 10, 1, 8}, /* actual: 1199.9 MHz */
+ { 16800000, 1200000000, 1000, 14, 1, 8},
+ { 19200000, 1200000000, 1000, 16, 1, 8},
+ { 26000000, 1200000000, 600, 13, 1, 8},
+
+ /* 1.1 GHz */
+ { 12000000, 1100000000, 825, 9, 1, 8},
+ { 13000000, 1100000000, 846, 10, 1, 8}, /* actual: 1099.8 MHz */
+ { 16800000, 1100000000, 982, 15, 1, 8}, /* actual: 1099.8 MHz */
+ { 19200000, 1100000000, 859, 15, 1, 8}, /* actual: 1099.5 MHz */
+ { 26000000, 1100000000, 550, 13, 1, 8},
+
+ /* 1 GHz */
+ { 12000000, 1000000000, 1000, 12, 1, 8},
+ { 13000000, 1000000000, 1000, 13, 1, 8},
+ { 16800000, 1000000000, 833, 14, 1, 8}, /* actual: 999.6 MHz */
+ { 19200000, 1000000000, 625, 12, 1, 8},
+ { 26000000, 1000000000, 1000, 26, 1, 8},
+
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_x = {
+ .name = "pll_x",
+ .flags = PLL_HAS_CPCON | PLL_ALT_MISC_REG | PLLX,
+ .ops = &tegra_pll_ops,
+ .reg = 0xe0,
+ .parent = &tegra_pll_ref,
+ .max_rate = 1700000000,
+ .u.pll = {
+ .input_min = 2000000,
+ .input_max = 31000000,
+ .cf_min = 1000000,
+ .cf_max = 6000000,
+ .vco_min = 20000000,
+ .vco_max = 1700000000,
+ .freq_table = tegra_pll_x_freq_table,
+ .lock_delay = 300,
+ },
+};
+
+static struct clk tegra_pll_x_out0 = {
+ .name = "pll_x_out0",
+ .ops = &tegra_pll_div_ops,
+ .flags = DIV_2 | PLLX,
+ .parent = &tegra_pll_x,
+ .max_rate = 850000000,
+};
+
+
+static struct clk_pll_freq_table tegra_pll_e_freq_table[] = {
+ /* PLLE special case: use cpcon field to store cml divider value */
+ { 12000000, 100000000, 150, 1, 18, 11},
+ { 216000000, 100000000, 200, 18, 24, 13},
+ { 0, 0, 0, 0, 0, 0 },
+};
+
+static struct clk tegra_pll_e = {
+ .name = "pll_e",
+ .flags = PLL_ALT_MISC_REG,
+ .ops = &tegra_plle_ops,
+ .reg = 0xe8,
+ .max_rate = 100000000,
+ .u.pll = {
+ .input_min = 12000000,
+ .input_max = 216000000,
+ .cf_min = 12000000,
+ .cf_max = 12000000,
+ .vco_min = 1200000000,
+ .vco_max = 2400000000U,
+ .freq_table = tegra_pll_e_freq_table,
+ .lock_delay = 300,
+ .fixed_rate = 100000000,
+ },
+};
+
+static struct clk tegra_cml0_clk = {
+ .name = "cml0",
+ .parent = &tegra_pll_e,
+ .ops = &tegra_cml_clk_ops,
+ .reg = PLLE_AUX,
+ .max_rate = 100000000,
+ .u.periph = {
+ .clk_num = 0,
+ },
+};
+
+static struct clk tegra_cml1_clk = {
+ .name = "cml1",
+ .parent = &tegra_pll_e,
+ .ops = &tegra_cml_clk_ops,
+ .reg = PLLE_AUX,
+ .max_rate = 100000000,
+ .u.periph = {
+ .clk_num = 1,
+ },
+};
+
+static struct clk tegra_pciex_clk = {
+ .name = "pciex",
+ .parent = &tegra_pll_e,
+ .ops = &tegra_pciex_clk_ops,
+ .max_rate = 100000000,
+ .u.periph = {
+ .clk_num = 74,
+ },
+};
+
+/* Audio sync clocks */
+#define SYNC_SOURCE(_id) \
+ { \
+ .name = #_id "_sync", \
+ .rate = 24000000, \
+ .max_rate = 24000000, \
+ .ops = &tegra_sync_source_ops \
+ }
+static struct clk tegra_sync_source_list[] = {
+ SYNC_SOURCE(spdif_in),
+ SYNC_SOURCE(i2s0),
+ SYNC_SOURCE(i2s1),
+ SYNC_SOURCE(i2s2),
+ SYNC_SOURCE(i2s3),
+ SYNC_SOURCE(i2s4),
+ SYNC_SOURCE(vimclk),
+};
+
+static struct clk_mux_sel mux_audio_sync_clk[] = {
+ { .input = &tegra_sync_source_list[0], .value = 0},
+ { .input = &tegra_sync_source_list[1], .value = 1},
+ { .input = &tegra_sync_source_list[2], .value = 2},
+ { .input = &tegra_sync_source_list[3], .value = 3},
+ { .input = &tegra_sync_source_list[4], .value = 4},
+ { .input = &tegra_sync_source_list[5], .value = 5},
+ { .input = &tegra_pll_a_out0, .value = 6},
+ { .input = &tegra_sync_source_list[6], .value = 7},
+ { 0, 0 }
+};
+
+#define AUDIO_SYNC_CLK(_id, _index) \
+ { \
+ .name = #_id, \
+ .inputs = mux_audio_sync_clk, \
+ .reg = 0x4A0 + (_index) * 4, \
+ .max_rate = 24000000, \
+ .ops = &tegra_audio_sync_clk_ops \
+ }
+static struct clk tegra_clk_audio_list[] = {
+ AUDIO_SYNC_CLK(audio0, 0),
+ AUDIO_SYNC_CLK(audio1, 1),
+ AUDIO_SYNC_CLK(audio2, 2),
+ AUDIO_SYNC_CLK(audio3, 3),
+ AUDIO_SYNC_CLK(audio4, 4),
+ AUDIO_SYNC_CLK(audio, 5), /* SPDIF */
+};
+
+#define AUDIO_SYNC_2X_CLK(_id, _index) \
+ { \
+ .name = #_id "_2x", \
+ .flags = PERIPH_NO_RESET, \
+ .max_rate = 48000000, \
+ .ops = &tegra_clk_double_ops, \
+ .reg = 0x49C, \
+ .reg_shift = 24 + (_index), \
+ .parent = &tegra_clk_audio_list[(_index)], \
+ .u.periph = { \
+ .clk_num = 113 + (_index), \
+ }, \
+ }
+static struct clk tegra_clk_audio_2x_list[] = {
+ AUDIO_SYNC_2X_CLK(audio0, 0),
+ AUDIO_SYNC_2X_CLK(audio1, 1),
+ AUDIO_SYNC_2X_CLK(audio2, 2),
+ AUDIO_SYNC_2X_CLK(audio3, 3),
+ AUDIO_SYNC_2X_CLK(audio4, 4),
+ AUDIO_SYNC_2X_CLK(audio, 5), /* SPDIF */
+};
+
+#define MUX_I2S_SPDIF(_id, _index) \
+static struct clk_mux_sel mux_pllaout0_##_id##_2x_pllp_clkm[] = { \
+ {.input = &tegra_pll_a_out0, .value = 0}, \
+ {.input = &tegra_clk_audio_2x_list[(_index)], .value = 1}, \
+ {.input = &tegra_pll_p, .value = 2}, \
+ {.input = &tegra_clk_m, .value = 3}, \
+ { 0, 0}, \
+}
+MUX_I2S_SPDIF(audio0, 0);
+MUX_I2S_SPDIF(audio1, 1);
+MUX_I2S_SPDIF(audio2, 2);
+MUX_I2S_SPDIF(audio3, 3);
+MUX_I2S_SPDIF(audio4, 4);
+MUX_I2S_SPDIF(audio, 5); /* SPDIF */
+
+/* External clock outputs (through PMC) */
+#define MUX_EXTERN_OUT(_id) \
+static struct clk_mux_sel mux_clkm_clkm2_clkm4_extern##_id[] = { \
+ {.input = &tegra_clk_m, .value = 0}, \
+ {.input = &tegra_clk_m_div2, .value = 1}, \
+ {.input = &tegra_clk_m_div4, .value = 2}, \
+ {.input = NULL, .value = 3}, /* placeholder */ \
+ { 0, 0}, \
+}
+MUX_EXTERN_OUT(1);
+MUX_EXTERN_OUT(2);
+MUX_EXTERN_OUT(3);
+
+static struct clk_mux_sel *mux_extern_out_list[] = {
+ mux_clkm_clkm2_clkm4_extern1,
+ mux_clkm_clkm2_clkm4_extern2,
+ mux_clkm_clkm2_clkm4_extern3,
+};
+
+#define CLK_OUT_CLK(_id) \
+ { \
+ .name = "clk_out_" #_id, \
+ .lookup = { \
+ .dev_id = "clk_out_" #_id, \
+ .con_id = "extern" #_id, \
+ }, \
+ .ops = &tegra_clk_out_ops, \
+ .reg = 0x1a8, \
+ .inputs = mux_clkm_clkm2_clkm4_extern##_id, \
+ .flags = MUX_CLK_OUT, \
+ .max_rate = 216000000, \
+ .u.periph = { \
+ .clk_num = (_id - 1) * 8 + 2, \
+ }, \
+ }
+static struct clk tegra_clk_out_list[] = {
+ CLK_OUT_CLK(1),
+ CLK_OUT_CLK(2),
+ CLK_OUT_CLK(3),
+};
+
+/* called after peripheral external clocks are initialized */
+static void init_clk_out_mux(void)
+{
+ int i;
+ struct clk *c;
+
+ /* output clock con_id is the name of peripheral
+ external clock connected to input 3 of the output mux */
+ for (i = 0; i < ARRAY_SIZE(tegra_clk_out_list); i++) {
+ c = tegra_get_clock_by_name(
+ tegra_clk_out_list[i].lookup.con_id);
+ if (!c)
+ pr_err("%s: could not find clk %s\n", __func__,
+ tegra_clk_out_list[i].lookup.con_id);
+ mux_extern_out_list[i][3].input = c;
+ }
+}
+
+/* Peripheral muxes */
+static struct clk_mux_sel mux_sclk[] = {
+ { .input = &tegra_clk_m, .value = 0},
+ { .input = &tegra_pll_c_out1, .value = 1},
+ { .input = &tegra_pll_p_out4, .value = 2},
+ { .input = &tegra_pll_p_out3, .value = 3},
+ { .input = &tegra_pll_p_out2, .value = 4},
+ /* { .input = &tegra_clk_d, .value = 5}, - no use on tegra30 */
+ { .input = &tegra_clk_32k, .value = 6},
+ { .input = &tegra_pll_m_out1, .value = 7},
+ { 0, 0},
+};
+
+static struct clk tegra_clk_sclk = {
+ .name = "sclk",
+ .inputs = mux_sclk,
+ .reg = 0x28,
+ .ops = &tegra_super_ops,
+ .max_rate = 334000000,
+ .min_rate = 40000000,
+};
+
+static struct clk tegra_clk_blink = {
+ .name = "blink",
+ .parent = &tegra_clk_32k,
+ .reg = 0x40,
+ .ops = &tegra_blink_clk_ops,
+ .max_rate = 32768,
+};
+
+static struct clk_mux_sel mux_pllm_pllc_pllp_plla[] = {
+ { .input = &tegra_pll_m, .value = 0},
+ { .input = &tegra_pll_c, .value = 1},
+ { .input = &tegra_pll_p, .value = 2},
+ { .input = &tegra_pll_a_out0, .value = 3},
+ { 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllc_pllm_clkm[] = {
+ { .input = &tegra_pll_p, .value = 0},
+ { .input = &tegra_pll_c, .value = 1},
+ { .input = &tegra_pll_m, .value = 2},
+ { .input = &tegra_clk_m, .value = 3},
+ { 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_clkm[] = {
+ { .input = &tegra_pll_p, .value = 0},
+ { .input = &tegra_clk_m, .value = 3},
+ { 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_plld_pllc_clkm[] = {
+ {.input = &tegra_pll_p, .value = 0},
+ {.input = &tegra_pll_d_out0, .value = 1},
+ {.input = &tegra_pll_c, .value = 2},
+ {.input = &tegra_clk_m, .value = 3},
+ { 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllm_plld_plla_pllc_plld2_clkm[] = {
+ {.input = &tegra_pll_p, .value = 0},
+ {.input = &tegra_pll_m, .value = 1},
+ {.input = &tegra_pll_d_out0, .value = 2},
+ {.input = &tegra_pll_a_out0, .value = 3},
+ {.input = &tegra_pll_c, .value = 4},
+ {.input = &tegra_pll_d2_out0, .value = 5},
+ {.input = &tegra_clk_m, .value = 6},
+ { 0, 0},
+};
+
+static struct clk_mux_sel mux_plla_pllc_pllp_clkm[] = {
+ { .input = &tegra_pll_a_out0, .value = 0},
+ /* { .input = &tegra_pll_c, .value = 1}, no use on tegra30 */
+ { .input = &tegra_pll_p, .value = 2},
+ { .input = &tegra_clk_m, .value = 3},
+ { 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllc_clk32_clkm[] = {
+ {.input = &tegra_pll_p, .value = 0},
+ {.input = &tegra_pll_c, .value = 1},
+ {.input = &tegra_clk_32k, .value = 2},
+ {.input = &tegra_clk_m, .value = 3},
+ { 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllc_clkm_clk32[] = {
+ {.input = &tegra_pll_p, .value = 0},
+ {.input = &tegra_pll_c, .value = 1},
+ {.input = &tegra_clk_m, .value = 2},
+ {.input = &tegra_clk_32k, .value = 3},
+ { 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_pllc_pllm[] = {
+ {.input = &tegra_pll_p, .value = 0},
+ {.input = &tegra_pll_c, .value = 1},
+ {.input = &tegra_pll_m, .value = 2},
+ { 0, 0},
+};
+
+static struct clk_mux_sel mux_clk_m[] = {
+ { .input = &tegra_clk_m, .value = 0},
+ { 0, 0},
+};
+
+static struct clk_mux_sel mux_pllp_out3[] = {
+ { .input = &tegra_pll_p_out3, .value = 0},
+ { 0, 0},
+};
+
+static struct clk_mux_sel mux_plld_out0[] = {
+ { .input = &tegra_pll_d_out0, .value = 0},
+ { 0, 0},
+};
+
+static struct clk_mux_sel mux_plld_out0_plld2_out0[] = {
+ { .input = &tegra_pll_d_out0, .value = 0},
+ { .input = &tegra_pll_d2_out0, .value = 1},
+ { 0, 0},
+};
+
+static struct clk_mux_sel mux_clk_32k[] = {
+ { .input = &tegra_clk_32k, .value = 0},
+ { 0, 0},
+};
+
+static struct clk_mux_sel mux_plla_clk32_pllp_clkm_plle[] = {
+ { .input = &tegra_pll_a_out0, .value = 0},
+ { .input = &tegra_clk_32k, .value = 1},
+ { .input = &tegra_pll_p, .value = 2},
+ { .input = &tegra_clk_m, .value = 3},
+ { .input = &tegra_pll_e, .value = 4},
+ { 0, 0},
+};
+
+static struct clk_mux_sel mux_cclk_g[] = {
+ { .input = &tegra_clk_m, .value = 0},
+ { .input = &tegra_pll_c, .value = 1},
+ { .input = &tegra_clk_32k, .value = 2},
+ { .input = &tegra_pll_m, .value = 3},
+ { .input = &tegra_pll_p, .value = 4},
+ { .input = &tegra_pll_p_out4, .value = 5},
+ { .input = &tegra_pll_p_out3, .value = 6},
+ { .input = &tegra_pll_x, .value = 8},
+ { 0, 0},
+};
+
+static struct clk tegra_clk_cclk_g = {
+ .name = "cclk_g",
+ .flags = DIV_U71 | DIV_U71_INT,
+ .inputs = mux_cclk_g,
+ .reg = 0x368,
+ .ops = &tegra_super_ops,
+ .max_rate = 1700000000,
+};
+
+static struct clk tegra30_clk_twd = {
+ .parent = &tegra_clk_cclk_g,
+ .name = "twd",
+ .ops = &tegra30_twd_ops,
+ .max_rate = 1400000000, /* Same as tegra_clk_cpu_cmplx.max_rate */
+ .mul = 1,
+ .div = 2,
+};
+
+#define PERIPH_CLK(_name, _dev, _con, _clk_num, _reg, _max, _inputs, _flags) \
+ { \
+ .name = _name, \
+ .lookup = { \
+ .dev_id = _dev, \
+ .con_id = _con, \
+ }, \
+ .ops = &tegra_periph_clk_ops, \
+ .reg = _reg, \
+ .inputs = _inputs, \
+ .flags = _flags, \
+ .max_rate = _max, \
+ .u.periph = { \
+ .clk_num = _clk_num, \
+ }, \
+ }
+
+#define PERIPH_CLK_EX(_name, _dev, _con, _clk_num, _reg, _max, _inputs, \
+ _flags, _ops) \
+ { \
+ .name = _name, \
+ .lookup = { \
+ .dev_id = _dev, \
+ .con_id = _con, \
+ }, \
+ .ops = _ops, \
+ .reg = _reg, \
+ .inputs = _inputs, \
+ .flags = _flags, \
+ .max_rate = _max, \
+ .u.periph = { \
+ .clk_num = _clk_num, \
+ }, \
+ }
+
+#define SHARED_CLK(_name, _dev, _con, _parent, _id, _div, _mode)\
+ { \
+ .name = _name, \
+ .lookup = { \
+ .dev_id = _dev, \
+ .con_id = _con, \
+ }, \
+ .ops = &tegra_clk_shared_bus_ops, \
+ .parent = _parent, \
+ .u.shared_bus_user = { \
+ .client_id = _id, \
+ .client_div = _div, \
+ .mode = _mode, \
+ }, \
+ }
+struct clk tegra_list_clks[] = {
+ PERIPH_CLK("apbdma", "tegra-dma", NULL, 34, 0, 26000000, mux_clk_m, 0),
+ PERIPH_CLK("rtc", "rtc-tegra", NULL, 4, 0, 32768, mux_clk_32k, PERIPH_NO_RESET | PERIPH_ON_APB),
+ PERIPH_CLK("kbc", "tegra-kbc", NULL, 36, 0, 32768, mux_clk_32k, PERIPH_NO_RESET | PERIPH_ON_APB),
+ PERIPH_CLK("timer", "timer", NULL, 5, 0, 26000000, mux_clk_m, 0),
+ PERIPH_CLK("kfuse", "kfuse-tegra", NULL, 40, 0, 26000000, mux_clk_m, 0),
+ PERIPH_CLK("fuse", "fuse-tegra", "fuse", 39, 0, 26000000, mux_clk_m, PERIPH_ON_APB),
+ PERIPH_CLK("fuse_burn", "fuse-tegra", "fuse_burn", 39, 0, 26000000, mux_clk_m, PERIPH_ON_APB),
+ PERIPH_CLK("apbif", "tegra30-ahub", "apbif", 107, 0, 26000000, mux_clk_m, 0),
+ PERIPH_CLK("i2s0", "tegra30-i2s.0", NULL, 30, 0x1d8, 26000000, mux_pllaout0_audio0_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("i2s1", "tegra30-i2s.1", NULL, 11, 0x100, 26000000, mux_pllaout0_audio1_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("i2s2", "tegra30-i2s.2", NULL, 18, 0x104, 26000000, mux_pllaout0_audio2_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("i2s3", "tegra30-i2s.3", NULL, 101, 0x3bc, 26000000, mux_pllaout0_audio3_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("i2s4", "tegra30-i2s.4", NULL, 102, 0x3c0, 26000000, mux_pllaout0_audio4_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("spdif_out", "tegra30-spdif", "spdif_out", 10, 0x108, 100000000, mux_pllaout0_audio_2x_pllp_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("spdif_in", "tegra30-spdif", "spdif_in", 10, 0x10c, 100000000, mux_pllp_pllc_pllm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("pwm", "pwm", NULL, 17, 0x110, 432000000, mux_pllp_pllc_clk32_clkm, MUX | MUX_PWM | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("d_audio", "tegra30-ahub", "d_audio", 106, 0x3d0, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71),
+ PERIPH_CLK("dam0", "tegra30-dam.0", NULL, 108, 0x3d8, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71),
+ PERIPH_CLK("dam1", "tegra30-dam.1", NULL, 109, 0x3dc, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71),
+ PERIPH_CLK("dam2", "tegra30-dam.2", NULL, 110, 0x3e0, 48000000, mux_plla_pllc_pllp_clkm, MUX | DIV_U71),
+ PERIPH_CLK("hda", "tegra30-hda", "hda", 125, 0x428, 108000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
+ PERIPH_CLK("hda2codec_2x", "tegra30-hda", "hda2codec", 111, 0x3e4, 48000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
+ PERIPH_CLK("hda2hdmi", "tegra30-hda", "hda2hdmi", 128, 0, 48000000, mux_clk_m, 0),
+ PERIPH_CLK("sbc1", "spi_tegra.0", NULL, 41, 0x134, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("sbc2", "spi_tegra.1", NULL, 44, 0x118, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("sbc3", "spi_tegra.2", NULL, 46, 0x11c, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("sbc4", "spi_tegra.3", NULL, 68, 0x1b4, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("sbc5", "spi_tegra.4", NULL, 104, 0x3c8, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("sbc6", "spi_tegra.5", NULL, 105, 0x3cc, 160000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("sata_oob", "tegra_sata_oob", NULL, 123, 0x420, 216000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
+ PERIPH_CLK("sata", "tegra_sata", NULL, 124, 0x424, 216000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
+ PERIPH_CLK("sata_cold", "tegra_sata_cold", NULL, 129, 0, 48000000, mux_clk_m, 0),
+ PERIPH_CLK_EX("ndflash", "tegra_nand", NULL, 13, 0x160, 240000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71, &tegra_nand_clk_ops),
+ PERIPH_CLK("ndspeed", "tegra_nand_speed", NULL, 80, 0x3f8, 240000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
+ PERIPH_CLK("vfir", "vfir", NULL, 7, 0x168, 72000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("sdmmc1", "sdhci-tegra.0", NULL, 14, 0x150, 208000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */
+ PERIPH_CLK("sdmmc2", "sdhci-tegra.1", NULL, 9, 0x154, 104000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */
+ PERIPH_CLK("sdmmc3", "sdhci-tegra.2", NULL, 69, 0x1bc, 208000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */
+ PERIPH_CLK("sdmmc4", "sdhci-tegra.3", NULL, 15, 0x164, 104000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* scales with voltage */
+ PERIPH_CLK("vcp", "tegra-avp", "vcp", 29, 0, 250000000, mux_clk_m, 0),
+ PERIPH_CLK("bsea", "tegra-avp", "bsea", 62, 0, 250000000, mux_clk_m, 0),
+ PERIPH_CLK("bsev", "tegra-aes", "bsev", 63, 0, 250000000, mux_clk_m, 0),
+ PERIPH_CLK("vde", "vde", NULL, 61, 0x1c8, 520000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_INT),
+ PERIPH_CLK("csite", "csite", NULL, 73, 0x1d4, 144000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* max rate ??? */
+ PERIPH_CLK("la", "la", NULL, 76, 0x1f8, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71),
+ PERIPH_CLK("owr", "tegra_w1", NULL, 71, 0x1cc, 26000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("nor", "nor", NULL, 42, 0x1d0, 127000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71), /* requires min voltage */
+ PERIPH_CLK("mipi", "mipi", NULL, 50, 0x174, 60000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | PERIPH_ON_APB), /* scales with voltage */
+ PERIPH_CLK("i2c1", "tegra-i2c.0", NULL, 12, 0x124, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB),
+ PERIPH_CLK("i2c2", "tegra-i2c.1", NULL, 54, 0x198, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB),
+ PERIPH_CLK("i2c3", "tegra-i2c.2", NULL, 67, 0x1b8, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB),
+ PERIPH_CLK("i2c4", "tegra-i2c.3", NULL, 103, 0x3c4, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB),
+ PERIPH_CLK("i2c5", "tegra-i2c.4", NULL, 47, 0x128, 26000000, mux_pllp_clkm, MUX | DIV_U16 | PERIPH_ON_APB),
+ PERIPH_CLK("uarta", "tegra_uart.0", NULL, 6, 0x178, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+ PERIPH_CLK("uartb", "tegra_uart.1", NULL, 7, 0x17c, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+ PERIPH_CLK("uartc", "tegra_uart.2", NULL, 55, 0x1a0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+ PERIPH_CLK("uartd", "tegra_uart.3", NULL, 65, 0x1c0, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+ PERIPH_CLK("uarte", "tegra_uart.4", NULL, 66, 0x1c4, 800000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+ PERIPH_CLK("uarta_dbg", "serial8250.0", "uarta", 6, 0x178, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+ PERIPH_CLK("uartb_dbg", "serial8250.0", "uartb", 7, 0x17c, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+ PERIPH_CLK("uartc_dbg", "serial8250.0", "uartc", 55, 0x1a0, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+ PERIPH_CLK("uartd_dbg", "serial8250.0", "uartd", 65, 0x1c0, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+ PERIPH_CLK("uarte_dbg", "serial8250.0", "uarte", 66, 0x1c4, 800000000, mux_pllp_clkm, MUX | DIV_U71 | DIV_U71_UART | PERIPH_ON_APB),
+ PERIPH_CLK_EX("vi", "tegra_camera", "vi", 20, 0x148, 425000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT, &tegra_vi_clk_ops),
+ PERIPH_CLK("3d", "3d", NULL, 24, 0x158, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET),
+ PERIPH_CLK("3d2", "3d2", NULL, 98, 0x3b0, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE | PERIPH_MANUAL_RESET),
+ PERIPH_CLK("2d", "2d", NULL, 21, 0x15c, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT | DIV_U71_IDLE),
+ PERIPH_CLK("vi_sensor", "tegra_camera", "vi_sensor", 20, 0x1a8, 150000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | PERIPH_NO_RESET),
+ PERIPH_CLK("epp", "epp", NULL, 19, 0x16c, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT),
+ PERIPH_CLK("mpe", "mpe", NULL, 60, 0x170, 520000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT),
+ PERIPH_CLK("host1x", "host1x", NULL, 28, 0x180, 260000000, mux_pllm_pllc_pllp_plla, MUX | DIV_U71 | DIV_U71_INT),
+ PERIPH_CLK("cve", "cve", NULL, 49, 0x140, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
+ PERIPH_CLK("tvo", "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
+ PERIPH_CLK_EX("dtv", "dtv", NULL, 79, 0x1dc, 250000000, mux_clk_m, 0, &tegra_dtv_clk_ops),
+ PERIPH_CLK("hdmi", "hdmi", NULL, 51, 0x18c, 148500000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm, MUX | MUX8 | DIV_U71),
+ PERIPH_CLK("tvdac", "tvdac", NULL, 53, 0x194, 220000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */
+ PERIPH_CLK("disp1", "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm, MUX | MUX8),
+ PERIPH_CLK("disp2", "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_pllm_plld_plla_pllc_plld2_clkm, MUX | MUX8),
+ PERIPH_CLK("usbd", "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0), /* requires min voltage */
+ PERIPH_CLK("usb2", "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0), /* requires min voltage */
+ PERIPH_CLK("usb3", "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0), /* requires min voltage */
+ PERIPH_CLK("dsia", "tegradc.0", "dsia", 48, 0, 500000000, mux_plld_out0, 0),
+ PERIPH_CLK_EX("dsib", "tegradc.1", "dsib", 82, 0xd0, 500000000, mux_plld_out0_plld2_out0, MUX | PLLD, &tegra_dsib_clk_ops),
+ PERIPH_CLK("csi", "tegra_camera", "csi", 52, 0, 102000000, mux_pllp_out3, 0),
+ PERIPH_CLK("isp", "tegra_camera", "isp", 23, 0, 150000000, mux_clk_m, 0), /* same frequency as VI */
+ PERIPH_CLK("csus", "tegra_camera", "csus", 92, 0, 150000000, mux_clk_m, PERIPH_NO_RESET),
+
+ PERIPH_CLK("tsensor", "tegra-tsensor", NULL, 100, 0x3b8, 216000000, mux_pllp_pllc_clkm_clk32, MUX | DIV_U71),
+ PERIPH_CLK("actmon", "actmon", NULL, 119, 0x3e8, 216000000, mux_pllp_pllc_clk32_clkm, MUX | DIV_U71),
+ PERIPH_CLK("extern1", "extern1", NULL, 120, 0x3ec, 216000000, mux_plla_clk32_pllp_clkm_plle, MUX | MUX8 | DIV_U71),
+ PERIPH_CLK("extern2", "extern2", NULL, 121, 0x3f0, 216000000, mux_plla_clk32_pllp_clkm_plle, MUX | MUX8 | DIV_U71),
+ PERIPH_CLK("extern3", "extern3", NULL, 122, 0x3f4, 216000000, mux_plla_clk32_pllp_clkm_plle, MUX | MUX8 | DIV_U71),
+ PERIPH_CLK("i2cslow", "i2cslow", NULL, 81, 0x3fc, 26000000, mux_pllp_pllc_clk32_clkm, MUX | DIV_U71 | PERIPH_ON_APB),
+ PERIPH_CLK("pcie", "tegra-pcie", "pcie", 70, 0, 250000000, mux_clk_m, 0),
+ PERIPH_CLK("afi", "tegra-pcie", "afi", 72, 0, 250000000, mux_clk_m, 0),
+ PERIPH_CLK("se", "se", NULL, 127, 0x42c, 520000000, mux_pllp_pllc_pllm_clkm, MUX | DIV_U71 | DIV_U71_INT),
+};
+
+#define CLK_DUPLICATE(_name, _dev, _con) \
+ { \
+ .name = _name, \
+ .lookup = { \
+ .dev_id = _dev, \
+ .con_id = _con, \
+ }, \
+ }
+
+/* Some clocks may be used by different drivers depending on the board
+ * configuration. List those here to register them twice in the clock lookup
+ * table under two names.
+ */
+struct clk_duplicate tegra_clk_duplicates[] = {
+ CLK_DUPLICATE("usbd", "utmip-pad", NULL),
+ CLK_DUPLICATE("usbd", "tegra-ehci.0", NULL),
+ CLK_DUPLICATE("usbd", "tegra-otg", NULL),
+ CLK_DUPLICATE("hdmi", "tegradc.0", "hdmi"),
+ CLK_DUPLICATE("hdmi", "tegradc.1", "hdmi"),
+ CLK_DUPLICATE("dsib", "tegradc.0", "dsib"),
+ CLK_DUPLICATE("dsia", "tegradc.1", "dsia"),
+ CLK_DUPLICATE("pwm", "tegra_pwm.0", NULL),
+ CLK_DUPLICATE("pwm", "tegra_pwm.1", NULL),
+ CLK_DUPLICATE("pwm", "tegra_pwm.2", NULL),
+ CLK_DUPLICATE("pwm", "tegra_pwm.3", NULL),
+ CLK_DUPLICATE("bsev", "tegra-avp", "bsev"),
+ CLK_DUPLICATE("bsev", "nvavp", "bsev"),
+ CLK_DUPLICATE("vde", "tegra-aes", "vde"),
+ CLK_DUPLICATE("bsea", "tegra-aes", "bsea"),
+ CLK_DUPLICATE("bsea", "nvavp", "bsea"),
+ CLK_DUPLICATE("cml1", "tegra_sata_cml", NULL),
+ CLK_DUPLICATE("cml0", "tegra_pcie", "cml"),
+ CLK_DUPLICATE("pciex", "tegra_pcie", "pciex"),
+ CLK_DUPLICATE("i2c1", "tegra-i2c-slave.0", NULL),
+ CLK_DUPLICATE("i2c2", "tegra-i2c-slave.1", NULL),
+ CLK_DUPLICATE("i2c3", "tegra-i2c-slave.2", NULL),
+ CLK_DUPLICATE("i2c4", "tegra-i2c-slave.3", NULL),
+ CLK_DUPLICATE("i2c5", "tegra-i2c-slave.4", NULL),
+ CLK_DUPLICATE("sbc1", "spi_slave_tegra.0", NULL),
+ CLK_DUPLICATE("sbc2", "spi_slave_tegra.1", NULL),
+ CLK_DUPLICATE("sbc3", "spi_slave_tegra.2", NULL),
+ CLK_DUPLICATE("sbc4", "spi_slave_tegra.3", NULL),
+ CLK_DUPLICATE("sbc5", "spi_slave_tegra.4", NULL),
+ CLK_DUPLICATE("sbc6", "spi_slave_tegra.5", NULL),
+ CLK_DUPLICATE("twd", "smp_twd", NULL),
+ CLK_DUPLICATE("vcp", "nvavp", "vcp"),
+};
+
+struct clk *tegra_ptr_clks[] = {
+ &tegra_clk_32k,
+ &tegra_clk_m,
+ &tegra_clk_m_div2,
+ &tegra_clk_m_div4,
+ &tegra_pll_ref,
+ &tegra_pll_m,
+ &tegra_pll_m_out1,
+ &tegra_pll_c,
+ &tegra_pll_c_out1,
+ &tegra_pll_p,
+ &tegra_pll_p_out1,
+ &tegra_pll_p_out2,
+ &tegra_pll_p_out3,
+ &tegra_pll_p_out4,
+ &tegra_pll_a,
+ &tegra_pll_a_out0,
+ &tegra_pll_d,
+ &tegra_pll_d_out0,
+ &tegra_pll_d2,
+ &tegra_pll_d2_out0,
+ &tegra_pll_u,
+ &tegra_pll_x,
+ &tegra_pll_x_out0,
+ &tegra_pll_e,
+ &tegra_clk_cclk_g,
+ &tegra_cml0_clk,
+ &tegra_cml1_clk,
+ &tegra_pciex_clk,
+ &tegra_clk_sclk,
+ &tegra_clk_blink,
+ &tegra30_clk_twd,
+};
+
+
+static void tegra30_init_one_clock(struct clk *c)
+{
+ clk_init(c);
+ INIT_LIST_HEAD(&c->shared_bus_list);
+ if (!c->lookup.dev_id && !c->lookup.con_id)
+ c->lookup.con_id = c->name;
+ c->lookup.clk = c;
+ clkdev_add(&c->lookup);
+}
+
+void __init tegra30_init_clocks(void)
+{
+ int i;
+ struct clk *c;
+
+ for (i = 0; i < ARRAY_SIZE(tegra_ptr_clks); i++)
+ tegra30_init_one_clock(tegra_ptr_clks[i]);
+
+ for (i = 0; i < ARRAY_SIZE(tegra_list_clks); i++)
+ tegra30_init_one_clock(&tegra_list_clks[i]);
+
+ for (i = 0; i < ARRAY_SIZE(tegra_clk_duplicates); i++) {
+ c = tegra_get_clock_by_name(tegra_clk_duplicates[i].name);
+ if (!c) {
+ pr_err("%s: Unknown duplicate clock %s\n", __func__,
+ tegra_clk_duplicates[i].name);
+ continue;
+ }
+
+ tegra_clk_duplicates[i].lookup.clk = c;
+ clkdev_add(&tegra_clk_duplicates[i].lookup);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(tegra_sync_source_list); i++)
+ tegra30_init_one_clock(&tegra_sync_source_list[i]);
+ for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_list); i++)
+ tegra30_init_one_clock(&tegra_clk_audio_list[i]);
+ for (i = 0; i < ARRAY_SIZE(tegra_clk_audio_2x_list); i++)
+ tegra30_init_one_clock(&tegra_clk_audio_2x_list[i]);
+
+ init_clk_out_mux();
+ for (i = 0; i < ARRAY_SIZE(tegra_clk_out_list); i++)
+ tegra30_init_one_clock(&tegra_clk_out_list[i]);
+
+}
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index b4c6926..b986560 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -94,19 +94,9 @@
#endif
};
-static struct amba_device uart0_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "uart0", /* Slow device at 0x3000 offset */
- .platform_data = &uart0_plat_data,
- },
- .res = {
- .start = U300_UART0_BASE,
- .end = U300_UART0_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_U300_UART0, NO_IRQ },
-};
+/* Slow device at 0x3000 offset */
+static AMBA_APB_DEVICE(uart0, "uart0", 0, U300_UART0_BASE,
+ { IRQ_U300_UART0 }, &uart0_plat_data);
/* The U335 have an additional UART1 on the APP CPU */
#ifdef CONFIG_MACH_U300_BS335
@@ -118,71 +108,28 @@
#endif
};
-static struct amba_device uart1_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "uart1", /* Fast device at 0x7000 offset */
- .platform_data = &uart1_plat_data,
- },
- .res = {
- .start = U300_UART1_BASE,
- .end = U300_UART1_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = { IRQ_U300_UART1, NO_IRQ },
-};
+/* Fast device at 0x7000 offset */
+static AMBA_APB_DEVICE(uart1, "uart1", 0, U300_UART1_BASE,
+ { IRQ_U300_UART1 }, &uart1_plat_data);
#endif
-static struct amba_device pl172_device = {
- .dev = {
- .init_name = "pl172", /* AHB device at 0x4000 offset */
- .platform_data = NULL,
- },
- .res = {
- .start = U300_EMIF_CFG_BASE,
- .end = U300_EMIF_CFG_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
+/* AHB device at 0x4000 offset */
+static AMBA_APB_DEVICE(pl172, "pl172", 0, U300_EMIF_CFG_BASE, { }, NULL);
/*
* Everything within this next ifdef deals with external devices connected to
* the APP SPI bus.
*/
-static struct amba_device pl022_device = {
- .dev = {
- .coherent_dma_mask = ~0,
- .init_name = "pl022", /* Fast device at 0x6000 offset */
- },
- .res = {
- .start = U300_SPI_BASE,
- .end = U300_SPI_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_U300_SPI, NO_IRQ },
- /*
- * This device has a DMA channel but the Linux driver does not use
- * it currently.
- */
-};
+/* Fast device at 0x6000 offset */
+static AMBA_APB_DEVICE(pl022, "pl022", 0, U300_SPI_BASE,
+ { IRQ_U300_SPI }, NULL);
-static struct amba_device mmcsd_device = {
- .dev = {
- .init_name = "mmci", /* Fast device at 0x1000 offset */
- .platform_data = NULL, /* Added later */
- },
- .res = {
- .start = U300_MMCSD_BASE,
- .end = U300_MMCSD_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
- /*
- * This device has a DMA channel but the Linux driver does not use
- * it currently.
- */
-};
+/* Fast device at 0x1000 offset */
+#define U300_MMCSD_IRQS { IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 }
+
+static AMBA_APB_DEVICE(mmcsd, "mmci", 0, U300_MMCSD_BASE,
+ U300_MMCSD_IRQS, NULL);
/*
* The order of device declaration may be important, since some devices
diff --git a/arch/arm/mach-u300/include/mach/entry-macro.S b/arch/arm/mach-u300/include/mach/entry-macro.S
deleted file mode 100644
index 7181d6a..0000000
--- a/arch/arm/mach-u300/include/mach/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- *
- * arch-arm/mach-u300/include/mach/entry-macro.S
- *
- *
- * Copyright (C) 2006-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Low-level IRQ helper macros for ST-Ericsson U300
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-u300/include/mach/system.h b/arch/arm/mach-u300/include/mach/system.h
deleted file mode 100644
index 574d46e..0000000
--- a/arch/arm/mach-u300/include/mach/system.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/system.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * System shutdown and reset functions.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index c59e8b8..d07a3af 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -28,6 +28,7 @@
bool "U8500 Development platform"
depends on UX500_SOC_DB8500
select TPS6105X
+ select SOC_BUS
help
Include support for the mop500 development platform.
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 5dde4d4..479ebe0 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -104,7 +104,7 @@
#endif
};
-static void sdi0_configure(void)
+static void sdi0_configure(struct device *parent)
{
int ret;
@@ -123,15 +123,15 @@
gpio_direction_output(sdi0_en, 1);
/* Add the device, force v2 to subrevision 1 */
- db8500_add_sdi0(&mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
+ db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
}
-void mop500_sdi_tc35892_init(void)
+void mop500_sdi_tc35892_init(struct device *parent)
{
mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
sdi0_en = GPIO_SDMMC_EN;
sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL;
- sdi0_configure();
+ sdi0_configure(parent);
}
/*
@@ -246,12 +246,13 @@
#endif
};
-void __init mop500_sdi_init(void)
+void __init mop500_sdi_init(struct device *parent)
{
/* PoP:ed eMMC */
- db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+ db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
/* On-board eMMC */
- db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+ db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+
/*
* On boards with the TC35892 GPIO expander, sdi0 will finally
* be added when the TC35892 initializes and calls
@@ -259,31 +260,31 @@
*/
}
-void __init snowball_sdi_init(void)
+void __init snowball_sdi_init(struct device *parent)
{
/* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */
mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED;
/* On-board eMMC */
- db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+ db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
/* External Micro SD slot */
mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
mop500_sdi0_data.cd_invert = true;
sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
- sdi0_configure();
+ sdi0_configure(parent);
}
-void __init hrefv60_sdi_init(void)
+void __init hrefv60_sdi_init(struct device *parent)
{
/* PoP:ed eMMC */
- db8500_add_sdi2(&mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
+ db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
/* On-board eMMC */
- db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
+ db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
/* External Micro SD slot */
mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
sdi0_en = HREFV60_SDMMC_EN_GPIO;
sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
- sdi0_configure();
+ sdi0_configure(parent);
/* WLAN SDIO channel */
- db8500_add_sdi1(&mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
+ db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 5c00712..04afcdf 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -226,7 +226,12 @@
static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
{
- mop500_sdi_tc35892_init();
+ struct device *parent = NULL;
+#if 0
+ /* FIXME: Is the sdi actually part of tc3589x? */
+ parent = tc3589x->dev;
+#endif
+ mop500_sdi_tc35892_init(parent);
}
static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
@@ -353,12 +358,12 @@
U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-static void __init mop500_i2c_init(void)
+static void __init mop500_i2c_init(struct device *parent)
{
- db8500_add_i2c0(&u8500_i2c0_data);
- db8500_add_i2c1(&u8500_i2c1_data);
- db8500_add_i2c2(&u8500_i2c2_data);
- db8500_add_i2c3(&u8500_i2c3_data);
+ db8500_add_i2c0(parent, &u8500_i2c0_data);
+ db8500_add_i2c1(parent, &u8500_i2c1_data);
+ db8500_add_i2c2(parent, &u8500_i2c2_data);
+ db8500_add_i2c3(parent, &u8500_i2c3_data);
}
static struct gpio_keys_button mop500_gpio_keys[] = {
@@ -451,9 +456,9 @@
.num_chipselect = 5,
};
-static void __init mop500_spi_init(void)
+static void __init mop500_spi_init(struct device *parent)
{
- db8500_add_ssp0(&ssp0_platform_data);
+ db8500_add_ssp0(parent, &ssp0_platform_data);
}
#ifdef CONFIG_STE_DMA40
@@ -587,11 +592,11 @@
#endif
};
-static void __init mop500_uart_init(void)
+static void __init mop500_uart_init(struct device *parent)
{
- db8500_add_uart0(&uart0_plat);
- db8500_add_uart1(&uart1_plat);
- db8500_add_uart2(&uart2_plat);
+ db8500_add_uart0(parent, &uart0_plat);
+ db8500_add_uart1(parent, &uart1_plat);
+ db8500_add_uart2(parent, &uart2_plat);
}
static struct platform_device *snowball_platform_devs[] __initdata = {
@@ -603,21 +608,26 @@
static void __init mop500_init_machine(void)
{
+ struct device *parent = NULL;
int i2c0_devs;
+ int i;
mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
- u8500_init_devices();
+ parent = u8500_init_devices();
mop500_pins_init();
+ for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
+ mop500_platform_devs[i]->dev.parent = parent;
+
platform_add_devices(mop500_platform_devs,
ARRAY_SIZE(mop500_platform_devs));
- mop500_i2c_init();
- mop500_sdi_init();
- mop500_spi_init();
- mop500_uart_init();
+ mop500_i2c_init(parent);
+ mop500_sdi_init(parent);
+ mop500_spi_init(parent);
+ mop500_uart_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
@@ -631,19 +641,24 @@
static void __init snowball_init_machine(void)
{
+ struct device *parent = NULL;
int i2c0_devs;
+ int i;
- u8500_init_devices();
+ parent = u8500_init_devices();
snowball_pins_init();
+ for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
+ snowball_platform_devs[i]->dev.parent = parent;
+
platform_add_devices(snowball_platform_devs,
ARRAY_SIZE(snowball_platform_devs));
- mop500_i2c_init();
- snowball_sdi_init();
- mop500_spi_init();
- mop500_uart_init();
+ mop500_i2c_init(parent);
+ snowball_sdi_init(parent);
+ mop500_spi_init(parent);
+ mop500_uart_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
@@ -656,7 +671,9 @@
static void __init hrefv60_init_machine(void)
{
+ struct device *parent = NULL;
int i2c0_devs;
+ int i;
/*
* The HREFv60 board removed a GPIO expander and routed
@@ -665,17 +682,20 @@
*/
mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
- u8500_init_devices();
+ parent = u8500_init_devices();
hrefv60_pins_init();
+ for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
+ mop500_platform_devs[i]->dev.parent = parent;
+
platform_add_devices(mop500_platform_devs,
ARRAY_SIZE(mop500_platform_devs));
- mop500_i2c_init();
- hrefv60_sdi_init();
- mop500_spi_init();
- mop500_uart_init();
+ mop500_i2c_init(parent);
+ hrefv60_sdi_init(parent);
+ mop500_spi_init(parent);
+ mop500_uart_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index f926d3d..3d594c2 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -75,10 +75,10 @@
struct i2c_board_info;
-extern void mop500_sdi_init(void);
-extern void snowball_sdi_init(void);
-extern void hrefv60_sdi_init(void);
-extern void mop500_sdi_tc35892_init(void);
+extern void mop500_sdi_init(struct device *parent);
+extern void snowball_sdi_init(struct device *parent);
+extern void hrefv60_sdi_init(struct device *parent);
+extern void mop500_sdi_tc35892_init(struct device *parent);
void __init mop500_u8500uib_init(void);
void __init mop500_stuib_init(void);
void __init mop500_pins_init(void);
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
index 63c3f80..836112e 100644
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -66,9 +66,9 @@
#endif
};
-void __init u5500_sdi_init(void)
+void __init u5500_sdi_init(struct device *parent)
{
nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
- db5500_add_sdi0(&u5500_sdi0_data);
+ db5500_add_sdi0(parent, &u5500_sdi0_data);
}
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 9de9e9c..0ff4be7 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -97,9 +97,9 @@
},
};
-static void __init u5500_i2c_init(void)
+static void __init u5500_i2c_init(struct device *parent)
{
- db5500_add_i2c2(&u5500_i2c2_data);
+ db5500_add_i2c2(parent, &u5500_i2c2_data);
i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
}
@@ -126,20 +126,27 @@
&ab5500_device,
};
-static void __init u5500_uart_init(void)
+static void __init u5500_uart_init(struct device *parent)
{
- db5500_add_uart0(NULL);
- db5500_add_uart1(NULL);
- db5500_add_uart2(NULL);
+ db5500_add_uart0(parent, NULL);
+ db5500_add_uart1(parent, NULL);
+ db5500_add_uart2(parent, NULL);
}
static void __init u5500_init_machine(void)
{
- u5500_init_devices();
+ struct device *parent = NULL;
+ int i;
+
+ parent = u5500_init_devices();
nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
- u5500_i2c_init();
- u5500_sdi_init();
- u5500_uart_init();
+
+ u5500_i2c_init(parent);
+ u5500_sdi_init(parent);
+ u5500_uart_init(parent);
+
+ for (i = 0; i < ARRAY_SIZE(u5500_platform_devices); i++)
+ u5500_platform_devices[i]->dev.parent = parent;
platform_add_devices(u5500_platform_devices,
ARRAY_SIZE(u5500_platform_devices));
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 18aa5c05..bca47f3 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -147,13 +147,13 @@
U5500_GPIOBANK7_BASE,
};
-static void __init db5500_add_gpios(void)
+static void __init db5500_add_gpios(struct device *parent)
{
struct nmk_gpio_platform_data pdata = {
/* No custom data yet */
};
- dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base),
+ dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base),
IRQ_DB5500_GPIO0, &pdata);
}
@@ -212,14 +212,36 @@
DB5500_DMA_DEV38_USB_OTG_OEP_8
};
-void __init u5500_init_devices(void)
+static const char *db5500_read_soc_id(void)
{
- db5500_add_gpios();
+ return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n");
+}
+
+static struct device * __init db5500_soc_device_init(void)
+{
+ const char *soc_id = db5500_read_soc_id();
+
+ return ux500_soc_device_init(soc_id);
+}
+
+struct device * __init u5500_init_devices(void)
+{
+ struct device *parent;
+ int i;
+
+ parent = db5500_soc_device_init();
+
+ db5500_add_gpios(parent);
db5500_pmu_init();
- db5500_dma_init();
- db5500_add_rtc();
- db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
+ db5500_dma_init(parent);
+ db5500_add_rtc(parent);
+ db5500_add_usb(parent, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
+
+ for (i = 0; i < ARRAY_SIZE(db5500_platform_devs); i++)
+ db5500_platform_devs[i]->dev.parent = parent;
platform_add_devices(db5500_platform_devs,
ARRAY_SIZE(db5500_platform_devs));
+
+ return parent;
}
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 7176ee7..9bd8163 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -24,6 +24,7 @@
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/usb.h>
+#include <mach/db8500-regs.h>
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
@@ -132,13 +133,13 @@
U8500_GPIOBANK8_BASE,
};
-static void __init db8500_add_gpios(void)
+static void __init db8500_add_gpios(struct device *parent)
{
struct nmk_gpio_platform_data pdata = {
.supports_sleepmode = true,
};
- dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
+ dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
IRQ_DB8500_GPIO0, &pdata);
}
@@ -164,17 +165,44 @@
DB8500_DMA_DEV39_USB_OTG_OEP_8
};
+static const char *db8500_read_soc_id(void)
+{
+ void __iomem *uid = __io_address(U8500_BB_UID_BASE);
+
+ return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
+ readl((u32 *)uid+1),
+ readl((u32 *)uid+1), readl((u32 *)uid+2),
+ readl((u32 *)uid+3), readl((u32 *)uid+4));
+}
+
+static struct device * __init db8500_soc_device_init(void)
+{
+ const char *soc_id = db8500_read_soc_id();
+
+ return ux500_soc_device_init(soc_id);
+}
+
/*
* This function is called from the board init
*/
-void __init u8500_init_devices(void)
+struct device * __init u8500_init_devices(void)
{
- db8500_add_rtc();
- db8500_add_gpios();
- db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+ struct device *parent;
+ int i;
- platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
+ parent = db8500_soc_device_init();
+
+ db8500_add_rtc(parent);
+ db8500_add_gpios(parent);
+ db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+
+ platform_device_register_data(parent,
+ "cpufreq-u8500", -1, NULL, 0);
+
+ for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
+ platform_devs[i]->dev.parent = parent;
+
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
- return ;
+ return parent;
}
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index f418574..055fb6e 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -2,6 +2,7 @@
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
*/
@@ -11,6 +12,10 @@
#include <linux/mfd/db8500-prcmu.h>
#include <linux/mfd/db5500-prcmu.h>
#include <linux/clksrc-dbx500-prcmu.h>
+#include <linux/sys_soc.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
@@ -50,3 +55,73 @@
db8500_prcmu_early_init();
clk_init();
}
+
+static const char * __init ux500_get_machine(void)
+{
+ return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
+}
+
+static const char * __init ux500_get_family(void)
+{
+ return kasprintf(GFP_KERNEL, "ux500");
+}
+
+static const char * __init ux500_get_revision(void)
+{
+ unsigned int rev = dbx500_revision();
+
+ if (rev == 0x01)
+ return kasprintf(GFP_KERNEL, "%s", "ED");
+ else if (rev >= 0xA0)
+ return kasprintf(GFP_KERNEL, "%d.%d",
+ (rev >> 4) - 0xA + 1, rev & 0xf);
+
+ return kasprintf(GFP_KERNEL, "%s", "Unknown");
+}
+
+static ssize_t ux500_get_process(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ if (dbx500_id.process == 0x00)
+ return sprintf(buf, "Standard\n");
+
+ return sprintf(buf, "%02xnm\n", dbx500_id.process);
+}
+
+static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr,
+ const char *soc_id)
+{
+ soc_dev_attr->soc_id = soc_id;
+ soc_dev_attr->machine = ux500_get_machine();
+ soc_dev_attr->family = ux500_get_family();
+ soc_dev_attr->revision = ux500_get_revision();
+}
+
+struct device_attribute ux500_soc_attr =
+ __ATTR(process, S_IRUGO, ux500_get_process, NULL);
+
+struct device * __init ux500_soc_device_init(const char *soc_id)
+{
+ struct device *parent;
+ struct soc_device *soc_dev;
+ struct soc_device_attribute *soc_dev_attr;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return ERR_PTR(-ENOMEM);
+
+ soc_info_populate(soc_dev_attr, soc_id);
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR_OR_NULL(soc_dev)) {
+ kfree(soc_dev_attr);
+ return NULL;
+ }
+
+ parent = soc_device_to_device(soc_dev);
+ if (!IS_ERR_OR_NULL(parent))
+ device_create_file(parent, &ux500_soc_attr);
+
+ return parent;
+}
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index c563e54..c5312a4 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -20,35 +20,31 @@
#include "devices-common.h"
struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
- int irq, void *pdata, unsigned int periphid)
+dbx500_add_amba_device(struct device *parent, const char *name,
+ resource_size_t base, int irq, void *pdata,
+ unsigned int periphid)
{
struct amba_device *dev;
int ret;
- dev = kzalloc(sizeof *dev, GFP_KERNEL);
+ dev = amba_device_alloc(name, base, SZ_4K);
if (!dev)
return ERR_PTR(-ENOMEM);
- dev->dev.init_name = name;
-
- dev->res.start = base;
- dev->res.end = base + SZ_4K - 1;
- dev->res.flags = IORESOURCE_MEM;
-
dev->dma_mask = DMA_BIT_MASK(32);
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
dev->irq[0] = irq;
- dev->irq[1] = NO_IRQ;
dev->periphid = periphid;
dev->dev.platform_data = pdata;
- ret = amba_device_register(dev, &iomem_resource);
+ dev->dev.parent = parent;
+
+ ret = amba_device_add(dev, &iomem_resource);
if (ret) {
- kfree(dev);
+ amba_device_put(dev);
return ERR_PTR(ret);
}
@@ -56,60 +52,7 @@
}
static struct platform_device *
-dbx500_add_platform_device(const char *name, int id, void *pdata,
- struct resource *res, int resnum)
-{
- struct platform_device *dev;
- int ret;
-
- dev = platform_device_alloc(name, id);
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
-
- ret = platform_device_add_resources(dev, res, resnum);
- if (ret)
- goto out_free;
-
- dev->dev.platform_data = pdata;
-
- ret = platform_device_add(dev);
- if (ret)
- goto out_free;
-
- return dev;
-
-out_free:
- platform_device_put(dev);
- return ERR_PTR(ret);
-}
-
-struct platform_device *
-dbx500_add_platform_device_4k1irq(const char *name, int id,
- resource_size_t base,
- int irq, void *pdata)
-{
- struct resource resources[] = {
- [0] = {
- .start = base,
- .end = base + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = irq,
- .end = irq,
- .flags = IORESOURCE_IRQ,
- }
- };
-
- return dbx500_add_platform_device(name, id, pdata, resources,
- ARRAY_SIZE(resources));
-}
-
-static struct platform_device *
-dbx500_add_gpio(int id, resource_size_t addr, int irq,
+dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
struct nmk_gpio_platform_data *pdata)
{
struct resource resources[] = {
@@ -125,13 +68,18 @@
}
};
- return platform_device_register_resndata(NULL, "gpio", id,
- resources, ARRAY_SIZE(resources),
- pdata, sizeof(*pdata));
+ return platform_device_register_resndata(
+ parent,
+ "gpio",
+ id,
+ resources,
+ ARRAY_SIZE(resources),
+ pdata,
+ sizeof(*pdata));
}
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
- struct nmk_gpio_platform_data *pdata)
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+ int irq, struct nmk_gpio_platform_data *pdata)
{
int first = 0;
int i;
@@ -141,6 +89,6 @@
pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
pdata->num_gpio = 32;
- dbx500_add_gpio(i, base[i], irq, pdata);
+ dbx500_add_gpio(parent, i, base[i], irq, pdata);
}
}
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 7825705..39c74ec 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -8,80 +8,89 @@
#ifndef __DEVICES_COMMON_H
#define __DEVICES_COMMON_H
-extern struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
- int irq, void *pdata, unsigned int periphid);
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/sys_soc.h>
+#include <plat/i2c.h>
-extern struct platform_device *
-dbx500_add_platform_device_4k1irq(const char *name, int id,
- resource_size_t base,
- int irq, void *pdata);
+extern struct amba_device *
+dbx500_add_amba_device(struct device *parent, const char *name,
+ resource_size_t base, int irq, void *pdata,
+ unsigned int periphid);
struct spi_master_cntlr;
static inline struct amba_device *
-dbx500_add_msp_spi(const char *name, resource_size_t base, int irq,
+dbx500_add_msp_spi(struct device *parent, const char *name,
+ resource_size_t base, int irq,
struct spi_master_cntlr *pdata)
{
- return dbx500_add_amba_device(name, base, irq, pdata, 0);
+ return dbx500_add_amba_device(parent, name, base, irq,
+ pdata, 0);
}
static inline struct amba_device *
-dbx500_add_spi(const char *name, resource_size_t base, int irq,
- struct spi_master_cntlr *pdata,
+dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
+ int irq, struct spi_master_cntlr *pdata,
u32 periphid)
{
- return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+ return dbx500_add_amba_device(parent, name, base, irq,
+ pdata, periphid);
}
struct mmci_platform_data;
static inline struct amba_device *
-dbx500_add_sdi(const char *name, resource_size_t base, int irq,
- struct mmci_platform_data *pdata,
- u32 periphid)
+dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
+ int irq, struct mmci_platform_data *pdata, u32 periphid)
{
- return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+ return dbx500_add_amba_device(parent, name, base, irq,
+ pdata, periphid);
}
struct amba_pl011_data;
static inline struct amba_device *
-dbx500_add_uart(const char *name, resource_size_t base, int irq,
- struct amba_pl011_data *pdata)
+dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
+ int irq, struct amba_pl011_data *pdata)
{
- return dbx500_add_amba_device(name, base, irq, pdata, 0);
+ return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
}
struct nmk_i2c_controller;
static inline struct platform_device *
-dbx500_add_i2c(int id, resource_size_t base, int irq,
- struct nmk_i2c_controller *pdata)
+dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
+ struct nmk_i2c_controller *data)
{
- return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq,
- pdata);
-}
+ struct resource res[] = {
+ DEFINE_RES_MEM(base, SZ_4K),
+ DEFINE_RES_IRQ(irq),
+ };
-struct msp_i2s_platform_data;
+ struct platform_device_info pdevinfo = {
+ .parent = parent,
+ .name = "nmk-i2c",
+ .id = id,
+ .res = res,
+ .num_res = ARRAY_SIZE(res),
+ .data = data,
+ .size_data = sizeof(*data),
+ .dma_mask = DMA_BIT_MASK(32),
+ };
-static inline struct platform_device *
-dbx500_add_msp_i2s(int id, resource_size_t base, int irq,
- struct msp_i2s_platform_data *pdata)
-{
- return dbx500_add_platform_device_4k1irq("MSP_I2S", id, base, irq,
- pdata);
+ return platform_device_register_full(&pdevinfo);
}
static inline struct amba_device *
-dbx500_add_rtc(resource_size_t base, int irq)
+dbx500_add_rtc(struct device *parent, resource_size_t base, int irq)
{
- return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0);
+ return dbx500_add_amba_device(parent, "rtc-pl031", base, irq, NULL, 0);
}
struct nmk_gpio_platform_data;
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
- struct nmk_gpio_platform_data *pdata);
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+ int irq, struct nmk_gpio_platform_data *pdata);
#endif
diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h
index 0c4bccd..e709555 100644
--- a/arch/arm/mach-ux500/devices-db5500.h
+++ b/arch/arm/mach-ux500/devices-db5500.h
@@ -10,70 +10,90 @@
#include "devices-common.h"
-#define db5500_add_i2c1(pdata) \
- dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
-#define db5500_add_i2c2(pdata) \
- dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
-#define db5500_add_i2c3(pdata) \
- dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
+#define db5500_add_i2c1(parent, pdata) \
+ dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
+#define db5500_add_i2c2(parent, pdata) \
+ dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
+#define db5500_add_i2c3(parent, pdata) \
+ dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
-#define db5500_add_msp0_i2s(pdata) \
- dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_i2s(pdata) \
- dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_i2s(pdata) \
- dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+ IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+ IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+ IRQ_DB5500_MSP2, pdata)
-#define db5500_add_msp0_spi(pdata) \
- dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(pdata) \
- dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(pdata) \
- dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+ IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+ IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+ IRQ_DB5500_MSP2, pdata)
-#define db5500_add_rtc() \
- dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC);
+#define db5500_add_rtc(parent) \
+ dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC);
-#define db5500_add_usb(rx_cfg, tx_cfg) \
- ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
+#define db5500_add_usb(parent, rx_cfg, tx_cfg) \
+ ux500_add_usb(parent, U5500_USBOTG_BASE, \
+ IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
-#define db5500_add_sdi0(pdata) \
- dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \
+#define db5500_add_sdi0(parent, pdata) \
+ dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \
+ IRQ_DB5500_SDMMC0, pdata, \
0x10480180)
-#define db5500_add_sdi1(pdata) \
- dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \
+#define db5500_add_sdi1(parent, pdata) \
+ dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \
+ IRQ_DB5500_SDMMC1, pdata, \
0x10480180)
-#define db5500_add_sdi2(pdata) \
- dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \
+#define db5500_add_sdi2(parent, pdata) \
+ dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \
+ IRQ_DB5500_SDMMC2, pdata \
0x10480180)
-#define db5500_add_sdi3(pdata) \
- dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \
+#define db5500_add_sdi3(parent, pdata) \
+ dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \
+ IRQ_DB5500_SDMMC3, pdata \
0x10480180)
-#define db5500_add_sdi4(pdata) \
- dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \
+#define db5500_add_sdi4(parent, pdata) \
+ dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \
+ IRQ_DB5500_SDMMC4, pdata \
0x10480180)
/* This one has a bad peripheral ID in the U5500 silicon */
-#define db5500_add_spi0(pdata) \
- dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \
+#define db5500_add_spi0(parent, pdata) \
+ dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \
+ IRQ_DB5500_SPI0, pdata, \
0x10080023)
-#define db5500_add_spi1(pdata) \
- dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \
+#define db5500_add_spi1(parent, pdata) \
+ dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \
+ IRQ_DB5500_SPI1, pdata, \
0x10080023)
-#define db5500_add_spi2(pdata) \
- dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \
+#define db5500_add_spi2(parent, pdata) \
+ dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \
+ IRQ_DB5500_SPI2, pdata \
0x10080023)
-#define db5500_add_spi3(pdata) \
- dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \
+#define db5500_add_spi3(parent, pdata) \
+ dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \
+ IRQ_DB5500_SPI3, pdata \
0x10080023)
-#define db5500_add_uart0(plat) \
- dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat)
-#define db5500_add_uart1(plat) \
- dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat)
-#define db5500_add_uart2(plat) \
- dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat)
-#define db5500_add_uart3(plat) \
- dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat)
+#define db5500_add_uart0(parent, plat) \
+ dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \
+ IRQ_DB5500_UART0, plat)
+#define db5500_add_uart1(parent, plat) \
+ dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \
+ IRQ_DB5500_UART1, plat)
+#define db5500_add_uart2(parent, plat) \
+ dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \
+ IRQ_DB5500_UART2, plat)
+#define db5500_add_uart3(parent, plat) \
+ dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \
+ IRQ_DB5500_UART3, plat)
#endif
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index cbd4a9a..9fd93e9 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -14,88 +14,114 @@
struct pl022_ssp_controller;
static inline struct platform_device *
-db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
+db8500_add_ske_keypad(struct device *parent,
+ struct ske_keypad_platform_data *pdata,
+ size_t size)
{
- return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1,
- U8500_SKE_BASE,
- IRQ_DB8500_KB, pdata);
+ struct resource resources[] = {
+ DEFINE_RES_MEM(U8500_SKE_BASE, SZ_4K),
+ DEFINE_RES_IRQ(IRQ_DB8500_KB),
+ };
+
+ return platform_device_register_resndata(parent, "nmk-ske-keypad", -1,
+ resources, 2, pdata, size);
}
static inline struct amba_device *
-db8500_add_ssp(const char *name, resource_size_t base, int irq,
- struct pl022_ssp_controller *pdata)
+db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
+ int irq, struct pl022_ssp_controller *pdata)
{
- return dbx500_add_amba_device(name, base, irq, pdata, 0);
+ return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
}
-#define db8500_add_i2c0(pdata) \
- dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
-#define db8500_add_i2c1(pdata) \
- dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
-#define db8500_add_i2c2(pdata) \
- dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
-#define db8500_add_i2c3(pdata) \
- dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
-#define db8500_add_i2c4(pdata) \
- dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
+#define db8500_add_i2c0(parent, pdata) \
+ dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
+#define db8500_add_i2c1(parent, pdata) \
+ dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
+#define db8500_add_i2c2(parent, pdata) \
+ dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
+#define db8500_add_i2c3(parent, pdata) \
+ dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
+#define db8500_add_i2c4(parent, pdata) \
+ dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
-#define db8500_add_msp0_i2s(pdata) \
- dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_i2s(pdata) \
- dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_i2s(pdata) \
- dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_i2s(pdata) \
- dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp0_i2s(parent, pdata) \
+ dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_i2s(parent, pdata) \
+ dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_i2s(parent, pdata) \
+ dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_i2s(parent, pdata) \
+ dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp0_spi(pdata) \
- dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_spi(pdata) \
- dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_spi(pdata) \
- dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_spi(pdata) \
- dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp0_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
+ IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \
+ IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \
+ IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \
+ IRQ_DB8500_MSP1, pdata)
-#define db8500_add_rtc() \
- dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC);
+#define db8500_add_rtc(parent) \
+ dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC);
-#define db8500_add_usb(rx_cfg, tx_cfg) \
- ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
+#define db8500_add_usb(parent, rx_cfg, tx_cfg) \
+ ux500_add_usb(parent, U8500_USBOTG_BASE, \
+ IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-#define db8500_add_sdi0(pdata, pid) \
- dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid)
-#define db8500_add_sdi1(pdata, pid) \
- dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid)
-#define db8500_add_sdi2(pdata, pid) \
- dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid)
-#define db8500_add_sdi3(pdata, pid) \
- dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid)
-#define db8500_add_sdi4(pdata, pid) \
- dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid)
-#define db8500_add_sdi5(pdata, pid) \
- dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid)
+#define db8500_add_sdi0(parent, pdata, pid) \
+ dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \
+ IRQ_DB8500_SDMMC0, pdata, pid)
+#define db8500_add_sdi1(parent, pdata, pid) \
+ dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \
+ IRQ_DB8500_SDMMC1, pdata, pid)
+#define db8500_add_sdi2(parent, pdata, pid) \
+ dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \
+ IRQ_DB8500_SDMMC2, pdata, pid)
+#define db8500_add_sdi3(parent, pdata, pid) \
+ dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \
+ IRQ_DB8500_SDMMC3, pdata, pid)
+#define db8500_add_sdi4(parent, pdata, pid) \
+ dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \
+ IRQ_DB8500_SDMMC4, pdata, pid)
+#define db8500_add_sdi5(parent, pdata, pid) \
+ dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \
+ IRQ_DB8500_SDMMC5, pdata, pid)
-#define db8500_add_ssp0(pdata) \
- db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata)
-#define db8500_add_ssp1(pdata) \
- db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata)
+#define db8500_add_ssp0(parent, pdata) \
+ db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
+ IRQ_DB8500_SSP0, pdata)
+#define db8500_add_ssp1(parent, pdata) \
+ db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \
+ IRQ_DB8500_SSP1, pdata)
-#define db8500_add_spi0(pdata) \
- dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0)
-#define db8500_add_spi1(pdata) \
- dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0)
-#define db8500_add_spi2(pdata) \
- dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0)
-#define db8500_add_spi3(pdata) \
- dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0)
+#define db8500_add_spi0(parent, pdata) \
+ dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \
+ IRQ_DB8500_SPI0, pdata, 0)
+#define db8500_add_spi1(parent, pdata) \
+ dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \
+ IRQ_DB8500_SPI1, pdata, 0)
+#define db8500_add_spi2(parent, pdata) \
+ dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \
+ IRQ_DB8500_SPI2, pdata, 0)
+#define db8500_add_spi3(parent, pdata) \
+ dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \
+ IRQ_DB8500_SPI3, pdata, 0)
-#define db8500_add_uart0(pdata) \
- dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata)
-#define db8500_add_uart1(pdata) \
- dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata)
-#define db8500_add_uart2(pdata) \
- dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata)
+#define db8500_add_uart0(parent, pdata) \
+ dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \
+ IRQ_DB8500_UART0, pdata)
+#define db8500_add_uart1(parent, pdata) \
+ dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \
+ IRQ_DB8500_UART1, pdata)
+#define db8500_add_uart2(parent, pdata) \
+ dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \
+ IRQ_DB8500_UART2, pdata)
#endif
diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
index 1cfab68..41e9470 100644
--- a/arch/arm/mach-ux500/dma-db5500.c
+++ b/arch/arm/mach-ux500/dma-db5500.c
@@ -125,10 +125,11 @@
.resource = dma40_resources
};
-void __init db5500_dma_init(void)
+void __init db5500_dma_init(struct device *parent)
{
int ret;
+ dma40_device.dev.parent = parent;
ret = platform_device_register(&dma40_device);
if (ret)
dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 80e10f5..9ec20b9 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -161,4 +161,7 @@
#define U8500_MODEM_BASE 0xe000000
#define U8500_APE_BASE 0x6000000
+/* SoC identification number information */
+#define U8500_BB_UID_BASE (U8500_BACKUPRAM1_BASE + 0xFC0)
+
#endif
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
deleted file mode 100644
index e16299e..0000000
--- a/arch/arm/mach-ux500/include/mach/entry-macro.S
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Low-level IRQ helper macros for U8500 platforms
- *
- * Copyright (C) 2009 ST-Ericsson.
- *
- * This file is a copy of ARM Realview platform.
- * -just satisfied checkpatch script.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index a7d363f..74b43bb 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -18,14 +18,16 @@
extern void __init u5500_map_io(void);
extern void __init u8500_map_io(void);
-extern void __init u5500_init_devices(void);
-extern void __init u8500_init_devices(void);
+extern struct device * __init u5500_init_devices(void);
+extern struct device * __init u8500_init_devices(void);
extern void __init ux500_init_irq(void);
-extern void __init u5500_sdi_init(void);
+extern void __init u5500_sdi_init(struct device *parent);
-extern void __init db5500_dma_init(void);
+extern void __init db5500_dma_init(struct device *parent);
+
+extern struct device *ux500_soc_device_init(const char *soc_id);
/* We re-use nomadik_timer for this platform */
extern void nmdk_timer_init(void);
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
deleted file mode 100644
index 258e5c9..0000000
--- a/arch/arm/mach-ux500/include/mach/system.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h
index d3739d4..4c1cc50 100644
--- a/arch/arm/mach-ux500/include/mach/usb.h
+++ b/arch/arm/mach-ux500/include/mach/usb.h
@@ -20,6 +20,6 @@
bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
};
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
- int *dma_tx_cfg);
+void ux500_add_usb(struct device *parent, resource_size_t base,
+ int irq, int *dma_rx_cfg, int *dma_tx_cfg);
#endif
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 9f9e1c2..a74af38 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -7,6 +7,7 @@
#include <linux/platform_device.h>
#include <linux/usb/musb.h>
#include <linux/dma-mapping.h>
+
#include <plat/ste_dma40.h>
#include <mach/hardware.h>
#include <mach/usb.h>
@@ -140,8 +141,8 @@
musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
}
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
- int *dma_tx_cfg)
+void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
+ int *dma_rx_cfg, int *dma_tx_cfg)
{
ux500_musb_device.resource[0].start = base;
ux500_musb_device.resource[0].end = base + SZ_64K - 1;
@@ -151,5 +152,7 @@
ux500_usb_dma_update_rx_ch_config(dma_rx_cfg);
ux500_usb_dma_update_tx_ch_config(dma_tx_cfg);
+ ux500_musb_device.dev.parent = parent;
+
platform_device_register(&ux500_musb_device);
}
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 02b7b93..4f352e4 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -582,58 +582,58 @@
.num_chipselect = 1,
};
-#define AACI_IRQ { IRQ_AACI, NO_IRQ }
+#define AACI_IRQ { IRQ_AACI }
#define MMCI0_IRQ { IRQ_MMCI0A,IRQ_SIC_MMCI0B }
-#define KMI0_IRQ { IRQ_SIC_KMI0, NO_IRQ }
-#define KMI1_IRQ { IRQ_SIC_KMI1, NO_IRQ }
+#define KMI0_IRQ { IRQ_SIC_KMI0 }
+#define KMI1_IRQ { IRQ_SIC_KMI1 }
/*
* These devices are connected directly to the multi-layer AHB switch
*/
-#define SMC_IRQ { NO_IRQ, NO_IRQ }
-#define MPMC_IRQ { NO_IRQ, NO_IRQ }
-#define CLCD_IRQ { IRQ_CLCDINT, NO_IRQ }
-#define DMAC_IRQ { IRQ_DMAINT, NO_IRQ }
+#define SMC_IRQ { }
+#define MPMC_IRQ { }
+#define CLCD_IRQ { IRQ_CLCDINT }
+#define DMAC_IRQ { IRQ_DMAINT }
/*
* These devices are connected via the core APB bridge
*/
-#define SCTL_IRQ { NO_IRQ, NO_IRQ }
-#define WATCHDOG_IRQ { IRQ_WDOGINT, NO_IRQ }
-#define GPIO0_IRQ { IRQ_GPIOINT0, NO_IRQ }
-#define GPIO1_IRQ { IRQ_GPIOINT1, NO_IRQ }
-#define RTC_IRQ { IRQ_RTCINT, NO_IRQ }
+#define SCTL_IRQ { }
+#define WATCHDOG_IRQ { IRQ_WDOGINT }
+#define GPIO0_IRQ { IRQ_GPIOINT0 }
+#define GPIO1_IRQ { IRQ_GPIOINT1 }
+#define RTC_IRQ { IRQ_RTCINT }
/*
* These devices are connected via the DMA APB bridge
*/
-#define SCI_IRQ { IRQ_SCIINT, NO_IRQ }
-#define UART0_IRQ { IRQ_UARTINT0, NO_IRQ }
-#define UART1_IRQ { IRQ_UARTINT1, NO_IRQ }
-#define UART2_IRQ { IRQ_UARTINT2, NO_IRQ }
-#define SSP_IRQ { IRQ_SSPINT, NO_IRQ }
+#define SCI_IRQ { IRQ_SCIINT }
+#define UART0_IRQ { IRQ_UARTINT0 }
+#define UART1_IRQ { IRQ_UARTINT1 }
+#define UART2_IRQ { IRQ_UARTINT2 }
+#define SSP_IRQ { IRQ_SSPINT }
/* FPGA Primecells */
-AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
-AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data);
-AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
-AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
+APB_DEVICE(aaci, "fpga:04", AACI, NULL);
+APB_DEVICE(mmc0, "fpga:05", MMCI0, &mmc0_plat_data);
+APB_DEVICE(kmi0, "fpga:06", KMI0, NULL);
+APB_DEVICE(kmi1, "fpga:07", KMI1, NULL);
/* DevChip Primecells */
-AMBA_DEVICE(smc, "dev:00", SMC, NULL);
-AMBA_DEVICE(mpmc, "dev:10", MPMC, NULL);
-AMBA_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
-AMBA_DEVICE(dmac, "dev:30", DMAC, NULL);
-AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
-AMBA_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
-AMBA_DEVICE(rtc, "dev:e8", RTC, NULL);
-AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
-AMBA_DEVICE(uart0, "dev:f1", UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2", UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3", UART2, NULL);
-AMBA_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data);
+AHB_DEVICE(smc, "dev:00", SMC, NULL);
+AHB_DEVICE(mpmc, "dev:10", MPMC, NULL);
+AHB_DEVICE(clcd, "dev:20", CLCD, &clcd_plat_data);
+AHB_DEVICE(dmac, "dev:30", DMAC, NULL);
+APB_DEVICE(sctl, "dev:e0", SCTL, NULL);
+APB_DEVICE(wdog, "dev:e1", WATCHDOG, NULL);
+APB_DEVICE(gpio0, "dev:e4", GPIO0, &gpio0_plat_data);
+APB_DEVICE(gpio1, "dev:e5", GPIO1, &gpio1_plat_data);
+APB_DEVICE(rtc, "dev:e8", RTC, NULL);
+APB_DEVICE(sci0, "dev:f0", SCI, NULL);
+APB_DEVICE(uart0, "dev:f1", UART0, NULL);
+APB_DEVICE(uart1, "dev:f2", UART1, NULL);
+APB_DEVICE(uart2, "dev:f3", UART2, NULL);
+APB_DEVICE(ssp0, "dev:f4", SSP, &ssp0_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
index 2ef2f55..683e607 100644
--- a/arch/arm/mach-versatile/core.h
+++ b/arch/arm/mach-versatile/core.h
@@ -36,20 +36,10 @@
extern struct of_dev_auxdata versatile_auxdata_lookup[];
#endif
-#define AMBA_DEVICE(name,busid,base,plat) \
-static struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0, \
- .init_name = busid, \
- .platform_data = plat, \
- }, \
- .res = { \
- .start = VERSATILE_##base##_BASE, \
- .end = (VERSATILE_##base##_BASE) + SZ_4K - 1,\
- .flags = IORESOURCE_MEM, \
- }, \
- .dma_mask = ~0, \
- .irq = base##_IRQ, \
-}
+#define APB_DEVICE(name, busid, base, plat) \
+static AMBA_APB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
+
+#define AHB_DEVICE(name, busid, base, plat) \
+static AMBA_AHB_DEVICE(name, busid, 0, VERSATILE_##base##_BASE, base##_IRQ, plat)
#endif
diff --git a/arch/arm/mach-versatile/include/mach/entry-macro.S b/arch/arm/mach-versatile/include/mach/entry-macro.S
deleted file mode 100644
index b6f0dbf..0000000
--- a/arch/arm/mach-versatile/include/mach/entry-macro.S
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for Versatile platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-versatile/include/mach/system.h b/arch/arm/mach-versatile/include/mach/system.h
deleted file mode 100644
index f3fa347..0000000
--- a/arch/arm/mach-versatile/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/system.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 9581c19..1973833 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -58,28 +58,28 @@
.irq_base = IRQ_GPIO3_START,
};
-#define UART3_IRQ { IRQ_SIC_UART3, NO_IRQ }
-#define SCI1_IRQ { IRQ_SIC_SCI3, NO_IRQ }
+#define UART3_IRQ { IRQ_SIC_UART3 }
+#define SCI1_IRQ { IRQ_SIC_SCI3 }
#define MMCI1_IRQ { IRQ_MMCI1A, IRQ_SIC_MMCI1B }
/*
* These devices are connected via the core APB bridge
*/
-#define GPIO2_IRQ { IRQ_GPIOINT2, NO_IRQ }
-#define GPIO3_IRQ { IRQ_GPIOINT3, NO_IRQ }
+#define GPIO2_IRQ { IRQ_GPIOINT2 }
+#define GPIO3_IRQ { IRQ_GPIOINT3 }
/*
* These devices are connected via the DMA APB bridge
*/
/* FPGA Primecells */
-AMBA_DEVICE(uart3, "fpga:09", UART3, NULL);
-AMBA_DEVICE(sci1, "fpga:0a", SCI1, NULL);
-AMBA_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data);
+APB_DEVICE(uart3, "fpga:09", UART3, NULL);
+APB_DEVICE(sci1, "fpga:0a", SCI1, NULL);
+APB_DEVICE(mmc1, "fpga:0b", MMCI1, &mmc1_plat_data);
/* DevChip Primecells */
-AMBA_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
-AMBA_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data);
+APB_DEVICE(gpio2, "dev:e6", GPIO2, &gpio2_plat_data);
+APB_DEVICE(gpio3, "dev:e7", GPIO3, &gpio3_plat_data);
static struct amba_device *amba_devs[] __initdata = {
&uart3_device,
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
index f439715..9f0f282 100644
--- a/arch/arm/mach-vexpress/core.h
+++ b/arch/arm/mach-vexpress/core.h
@@ -1,19 +1,2 @@
#define __MMIO_P2V(x) (((x) & 0xfffff) | (((x) & 0x0f000000) >> 4) | 0xf8000000)
#define MMIO_P2V(x) ((void __iomem *)__MMIO_P2V(x))
-
-#define AMBA_DEVICE(name,busid,base,plat) \
-struct amba_device name##_device = { \
- .dev = { \
- .coherent_dma_mask = ~0UL, \
- .init_name = busid, \
- .platform_data = plat, \
- }, \
- .res = { \
- .start = base, \
- .end = base + SZ_4K - 1, \
- .flags = IORESOURCE_MEM, \
- }, \
- .dma_mask = ~0UL, \
- .irq = IRQ_##base, \
- /* .dma = DMA_##base,*/ \
-}
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index b1e87c1..1b1d2e4 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -109,10 +109,10 @@
.remove = versatile_clcd_remove_dma,
};
-static AMBA_DEVICE(clcd, "ct:clcd", CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
-static AMBA_DEVICE(dmc, "ct:dmc", CT_CA9X4_DMC, NULL);
-static AMBA_DEVICE(smc, "ct:smc", CT_CA9X4_SMC, NULL);
-static AMBA_DEVICE(gpio, "ct:gpio", CT_CA9X4_GPIO, NULL);
+static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
+static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL);
+static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL);
+static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL);
static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
&clcd_device,
diff --git a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
index a34d3d4..a40468f 100644
--- a/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
+++ b/arch/arm/mach-vexpress/include/mach/ct-ca9x4.h
@@ -35,7 +35,7 @@
* Interrupts. Those in {} are for AMBA devices
*/
#define IRQ_CT_CA9X4_CLCDC { 76 }
-#define IRQ_CT_CA9X4_DMC { -1 }
+#define IRQ_CT_CA9X4_DMC { 0 }
#define IRQ_CT_CA9X4_SMC { 77, 78 }
#define IRQ_CT_CA9X4_TIMER0 80
#define IRQ_CT_CA9X4_TIMER1 81
diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S
deleted file mode 100644
index a14f9e6..0000000
--- a/arch/arm/mach-vexpress/include/mach/entry-macro.S
+++ /dev/null
@@ -1,5 +0,0 @@
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-vexpress/include/mach/system.h b/arch/arm/mach-vexpress/include/mach/system.h
deleted file mode 100644
index f653a8e..0000000
--- a/arch/arm/mach-vexpress/include/mach/system.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-vexpress/include/mach/system.h
- *
- * Copyright (C) 2003 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index b4a28ca..ad64f97 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -266,16 +266,16 @@
.status = v2m_mmci_status,
};
-static AMBA_DEVICE(aaci, "mb:aaci", V2M_AACI, NULL);
-static AMBA_DEVICE(mmci, "mb:mmci", V2M_MMCI, &v2m_mmci_data);
-static AMBA_DEVICE(kmi0, "mb:kmi0", V2M_KMI0, NULL);
-static AMBA_DEVICE(kmi1, "mb:kmi1", V2M_KMI1, NULL);
-static AMBA_DEVICE(uart0, "mb:uart0", V2M_UART0, NULL);
-static AMBA_DEVICE(uart1, "mb:uart1", V2M_UART1, NULL);
-static AMBA_DEVICE(uart2, "mb:uart2", V2M_UART2, NULL);
-static AMBA_DEVICE(uart3, "mb:uart3", V2M_UART3, NULL);
-static AMBA_DEVICE(wdt, "mb:wdt", V2M_WDT, NULL);
-static AMBA_DEVICE(rtc, "mb:rtc", V2M_RTC, NULL);
+static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL);
+static AMBA_APB_DEVICE(mmci, "mb:mmci", 0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data);
+static AMBA_APB_DEVICE(kmi0, "mb:kmi0", 0, V2M_KMI0, IRQ_V2M_KMI0, NULL);
+static AMBA_APB_DEVICE(kmi1, "mb:kmi1", 0, V2M_KMI1, IRQ_V2M_KMI1, NULL);
+static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL);
+static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL);
+static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL);
+static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL);
+static AMBA_APB_DEVICE(wdt, "mb:wdt", 0, V2M_WDT, IRQ_V2M_WDT, NULL);
+static AMBA_APB_DEVICE(rtc, "mb:rtc", 0, V2M_RTC, IRQ_V2M_RTC, NULL);
static struct amba_device *v2m_amba_devs[] __initdata = {
&aaci_device,
diff --git a/arch/arm/mach-vt8500/include/mach/entry-macro.S b/arch/arm/mach-vt8500/include/mach/entry-macro.S
index 92684c7..367d1b5 100644
--- a/arch/arm/mach-vt8500/include/mach/entry-macro.S
+++ b/arch/arm/mach-vt8500/include/mach/entry-macro.S
@@ -8,18 +8,12 @@
* warranty of any kind, whether express or implied.
*/
- .macro disable_fiq
- .endm
-
.macro get_irqnr_preamble, base, tmp
@ physical 0xd8140000 is virtual 0xf8140000
mov \base, #0xf8000000
orr \base, \base, #0x00140000
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqnr, [\base]
cmp \irqnr, #63 @ may be false positive, check interrupt status
diff --git a/arch/arm/mach-vt8500/include/mach/system.h b/arch/arm/mach-vt8500/include/mach/system.h
index d6c757e..58fa801 100644
--- a/arch/arm/mach-vt8500/include/mach/system.h
+++ b/arch/arm/mach-vt8500/include/mach/system.h
@@ -7,11 +7,6 @@
/* PM Software Reset request register */
#define VT8500_PMSR_VIRT 0xf8130060
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
static inline void arch_reset(char mode, const char *cmd)
{
writel(1, VT8500_PMSR_VIRT);
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 78110be..db82568 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -530,6 +530,7 @@
void __init nuc900_board_init(struct platform_device **device, int size)
{
+ disable_hlt();
platform_add_devices(device, size);
platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
spi_register_board_info(nuc900_spi_board_info,
diff --git a/arch/arm/mach-w90x900/include/mach/entry-macro.S b/arch/arm/mach-w90x900/include/mach/entry-macro.S
index d39aca5..e286dac 100644
--- a/arch/arm/mach-w90x900/include/mach/entry-macro.S
+++ b/arch/arm/mach-w90x900/include/mach/entry-macro.S
@@ -15,9 +15,6 @@
.macro get_irqnr_preamble, base, tmp
.endm
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
mov \base, #AIC_BA
@@ -27,8 +24,3 @@
cmp \irqnr, #0
.endm
-
- /* currently don't need an disable_fiq macro */
-
- .macro disable_fiq
- .endm
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
deleted file mode 100644
index 2aaeb93..0000000
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/system.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/system.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-static void arch_idle(void)
-{
-}
diff --git a/arch/arm/mach-zynq/include/mach/entry-macro.S b/arch/arm/mach-zynq/include/mach/entry-macro.S
deleted file mode 100644
index d621fb7..0000000
--- a/arch/arm/mach-zynq/include/mach/entry-macro.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-zynq/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros
- *
- * Copyright (C) 2011 Xilinx
- *
- * based on arch/plat-mxc/include/mach/entry-macro.S
- *
- * Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/mach-zynq/include/mach/system.h b/arch/arm/mach-zynq/include/mach/system.h
deleted file mode 100644
index 8e88e0b..0000000
--- a/arch/arm/mach-zynq/include/mach/system.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/system.h
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_SYSTEM_H__
-#define __MACH_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
deleted file mode 100644
index def5d30..0000000
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ /dev/null
@@ -1,16 +0,0 @@
-/*
- * Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org>
- * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
- .macro disable_fiq
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
deleted file mode 100644
index 13ad0df..0000000
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- * Copyright 2004-2008 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_SYSTEM_H__
-#define __ASM_ARCH_MXC_SYSTEM_H__
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif /* __ASM_ARCH_MXC_SYSTEM_H__ */
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
deleted file mode 100644
index 8e5ebd7..0000000
--- a/arch/arm/plat-omap/include/plat/system.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * Copied from arch/arm/mach-sa1100/include/mach/system.h
- * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/proc-fns.h>
-
-static inline void arch_idle(void)
-{
- cpu_do_idle();
-}
-
-#endif
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index 21f1fda..32a0993 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -32,6 +32,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/regs-clock.h>
#include <asm/irq.h>
#include <asm/cacheflush.h>
@@ -190,8 +191,34 @@
return __raw_readl(S3C2410_GSTATUS1);
}
+static void s3c24xx_default_idle(void)
+{
+ unsigned long tmp;
+ int i;
+
+ /* idle the system by using the idle mode which will wait for an
+ * interrupt to happen before restarting the system.
+ */
+
+ /* Warning: going into idle state upsets jtag scanning */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+
+ /* the samsung port seems to do a loop and then unset idle.. */
+ for (i = 0; i < 50; i++)
+ tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
+
+ /* this bit is not cleared on re-start... */
+
+ __raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+ S3C2410_CLKCON);
+}
+
void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
{
+ arm_pm_idle = s3c24xx_default_idle;
+
/* initialise the io descriptors we need for initialisation */
iotable_init(mach_desc, size);
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 95e6819..037b448 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -53,7 +53,7 @@
* elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
* such directly equating the two source clocks is impossible.
*/
-struct clk clk_mpllref = {
+static struct clk clk_mpllref = {
.name = "mpllref",
.parent = &clk_xtal,
};
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 8167ce6..96bea32 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -9,8 +9,8 @@
bool
depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
default y
- select ARM_VIC if !ARCH_EXYNOS4
- select ARM_GIC if ARCH_EXYNOS4
+ select ARM_VIC if !ARCH_EXYNOS
+ select ARM_GIC if ARCH_EXYNOS
select GIC_NON_BANKED if ARCH_EXYNOS4
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
@@ -40,6 +40,10 @@
help
Use the High Resolution timer support
+config S5P_DEV_UART
+ def_bool y
+ depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+
config S5P_PM
bool
help
@@ -80,6 +84,16 @@
help
Compile in platform device definitions for FIMC controller 3
+config S5P_DEV_JPEG
+ bool
+ help
+ Compile in platform device definitions for JPEG codec
+
+config S5P_DEV_G2D
+ bool
+ help
+ Compile in platform device definitions for G2D device
+
config S5P_DEV_FIMD0
bool
help
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 30d8c30..4bd8241 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -12,7 +12,6 @@
# Core files
-obj-y += dev-uart.o
obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
@@ -23,5 +22,7 @@
obj-$(CONFIG_S5P_HRT) += s5p-time.o
# devices
+
+obj-$(CONFIG_S5P_DEV_UART) += dev-uart.o
obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o
obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index 963edea..f68a9bb 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -61,6 +61,20 @@
.id = -1,
};
+/* BPLL clock output */
+
+struct clk clk_fout_bpll = {
+ .name = "fout_bpll",
+ .id = -1,
+};
+
+/* CPLL clock output */
+
+struct clk clk_fout_cpll = {
+ .name = "fout_cpll",
+ .id = -1,
+};
+
/* MPLL clock output
* No need .ctrlbit, this is always on
*/
@@ -101,6 +115,28 @@
.nr_sources = ARRAY_SIZE(clk_src_apll_list),
};
+/* Possible clock sources for BPLL Mux */
+static struct clk *clk_src_bpll_list[] = {
+ [0] = &clk_fin_bpll,
+ [1] = &clk_fout_bpll,
+};
+
+struct clksrc_sources clk_src_bpll = {
+ .sources = clk_src_bpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_bpll_list),
+};
+
+/* Possible clock sources for CPLL Mux */
+static struct clk *clk_src_cpll_list[] = {
+ [0] = &clk_fin_cpll,
+ [1] = &clk_fout_cpll,
+};
+
+struct clksrc_sources clk_src_cpll = {
+ .sources = clk_src_cpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_cpll_list),
+};
+
/* Possible clock sources for MPLL Mux */
static struct clk *clk_src_mpll_list[] = {
[0] = &clk_fin_mpll,
diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c
index c496b35..139c050 100644
--- a/arch/arm/plat-s5p/irq-eint.c
+++ b/arch/arm/plat-s5p/irq-eint.c
@@ -200,7 +200,7 @@
#endif
};
-int __init s5p_init_irq_eint(void)
+static int __init s5p_init_irq_eint(void)
{
int irq;
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index 1fdfaa4..82c7311 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -41,7 +41,7 @@
void (*handler)(unsigned int, struct irq_desc *);
};
-LIST_HEAD(banks);
+static LIST_HEAD(banks);
static int s5p_gpioint_set_type(struct irq_data *d, unsigned int type)
{
diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c
index 327acb3..d1bfeca 100644
--- a/arch/arm/plat-s5p/irq-pm.c
+++ b/arch/arm/plat-s5p/irq-pm.c
@@ -39,19 +39,32 @@
int s3c_irq_wake(struct irq_data *data, unsigned int state)
{
unsigned long irqbit;
+ unsigned int irq_rtc_tic, irq_rtc_alarm;
- switch (data->irq) {
- case IRQ_RTC_TIC:
- case IRQ_RTC_ALARM:
- irqbit = 1 << (data->irq + 1 - IRQ_RTC_ALARM);
+#ifdef CONFIG_ARCH_EXYNOS
+ if (soc_is_exynos5250()) {
+ irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC;
+ irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM;
+ } else {
+ irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC;
+ irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM;
+ }
+#else
+ irq_rtc_tic = IRQ_RTC_TIC;
+ irq_rtc_alarm = IRQ_RTC_ALARM;
+#endif
+
+ if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
+ irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);
+
if (!state)
s3c_irqwake_intmask |= irqbit;
else
s3c_irqwake_intmask &= ~irqbit;
- break;
- default:
+ } else {
return -ENOENT;
}
+
return 0;
}
diff --git a/arch/arm/plat-s5p/sleep.S b/arch/arm/plat-s5p/sleep.S
index 0fd591b..006bd01 100644
--- a/arch/arm/plat-s5p/sleep.S
+++ b/arch/arm/plat-s5p/sleep.S
@@ -23,9 +23,18 @@
*/
#include <linux/linkage.h>
-#include <asm/assembler.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
- .text
+/*
+ * The following code is located into the .data section. This is to
+ * allow l2x0_regs_phys to be accessed with a relative load while we
+ * can't rely on any MMU translation. We could have put l2x0_regs_phys
+ * in the .text section as well, but some setups might insist on it to
+ * be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
+ */
+ .data
+ .align
/*
* sleep magic, to allow the bootloader to check for an valid
@@ -39,11 +48,34 @@
* s3c_cpu_resume
*
* resume code entry for bootloader to call
- *
- * we must put this code here in the data segment as we have no
- * other way of restoring the stack pointer after sleep, and we
- * must not write to the code segment (code is read-only)
*/
ENTRY(s3c_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+ adr r0, l2x0_regs_phys
+ ldr r0, [r0]
+ ldr r1, [r0, #L2X0_R_PHY_BASE]
+ ldr r2, [r1, #L2X0_CTRL]
+ tst r2, #0x1
+ bne resume_l2on
+ ldr r2, [r0, #L2X0_R_AUX_CTRL]
+ str r2, [r1, #L2X0_AUX_CTRL]
+ ldr r2, [r0, #L2X0_R_TAG_LATENCY]
+ str r2, [r1, #L2X0_TAG_LATENCY_CTRL]
+ ldr r2, [r0, #L2X0_R_DATA_LATENCY]
+ str r2, [r1, #L2X0_DATA_LATENCY_CTRL]
+ ldr r2, [r0, #L2X0_R_PREFETCH_CTRL]
+ str r2, [r1, #L2X0_PREFETCH_CTRL]
+ ldr r2, [r0, #L2X0_R_PWR_CTRL]
+ str r2, [r1, #L2X0_POWER_CTRL]
+ mov r2, #1
+ str r2, [r1, #L2X0_CTRL]
+resume_l2on:
+#endif
b cpu_resume
+ENDPROC(s3c_cpu_resume)
+#ifdef CONFIG_CACHE_L2X0
+ .globl l2x0_regs_phys
+l2x0_regs_phys:
+ .long 0
+#endif
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 10f7117..65c5eca 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -84,31 +84,35 @@
int clk_enable(struct clk *clk)
{
+ unsigned long flags;
+
if (IS_ERR(clk) || clk == NULL)
return -EINVAL;
clk_enable(clk->parent);
- spin_lock(&clocks_lock);
+ spin_lock_irqsave(&clocks_lock, flags);
if ((clk->usage++) == 0)
(clk->enable)(clk, 1);
- spin_unlock(&clocks_lock);
+ spin_unlock_irqrestore(&clocks_lock, flags);
return 0;
}
void clk_disable(struct clk *clk)
{
+ unsigned long flags;
+
if (IS_ERR(clk) || clk == NULL)
return;
- spin_lock(&clocks_lock);
+ spin_lock_irqsave(&clocks_lock, flags);
if ((--clk->usage) == 0)
(clk->enable)(clk, 0);
- spin_unlock(&clocks_lock);
+ spin_unlock_irqrestore(&clocks_lock, flags);
clk_disable(clk->parent);
}
diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c
index a976c02..5f197dc 100644
--- a/arch/arm/plat-samsung/dev-backlight.c
+++ b/arch/arm/plat-samsung/dev-backlight.c
@@ -77,7 +77,7 @@
* @gpio_info: structure containing GPIO info for PWM timer
* @bl_data: structure containing Backlight control data
*/
-void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
+void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
struct platform_pwm_backlight_data *bl_data)
{
int ret = 0;
@@ -115,6 +115,8 @@
samsung_bl_data->init = bl_data->init;
if (bl_data->notify)
samsung_bl_data->notify = bl_data->notify;
+ if (bl_data->notify_after)
+ samsung_bl_data->notify_after = bl_data->notify_after;
if (bl_data->exit)
samsung_bl_data->exit = bl_data->exit;
if (bl_data->check_fb)
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index d21d744..8b928f9 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -57,6 +57,7 @@
#include <plat/sdhci.h>
#include <plat/ts.h>
#include <plat/udc.h>
+#include <plat/udc-hs.h>
#include <plat/usb-control.h>
#include <plat/usb-phy.h>
#include <plat/regs-iic.h>
@@ -267,6 +268,52 @@
};
#endif /* CONFIG_S5P_DEV_FIMC3 */
+/* G2D */
+
+#ifdef CONFIG_S5P_DEV_G2D
+static struct resource s5p_g2d_resource[] = {
+ [0] = {
+ .start = S5P_PA_G2D,
+ .end = S5P_PA_G2D + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_2D,
+ .end = IRQ_2D,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s5p_device_g2d = {
+ .name = "s5p-g2d",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p_g2d_resource),
+ .resource = s5p_g2d_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+#endif /* CONFIG_S5P_DEV_G2D */
+
+#ifdef CONFIG_S5P_DEV_JPEG
+static struct resource s5p_jpeg_resource[] = {
+ [0] = DEFINE_RES_MEM(S5P_PA_JPEG, SZ_4K),
+ [1] = DEFINE_RES_IRQ(IRQ_JPEG),
+};
+
+struct platform_device s5p_device_jpeg = {
+ .name = "s5p-jpeg",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s5p_jpeg_resource),
+ .resource = s5p_jpeg_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+#endif /* CONFIG_S5P_DEV_JPEG */
+
/* FIMD0 */
#ifdef CONFIG_S5P_DEV_FIMD0
@@ -744,17 +791,6 @@
};
#endif /* CONFIG_PLAT_S3C24XX */
-#ifdef CONFIG_CPU_S3C2440
-struct platform_device s3c2412_device_iis = {
- .name = "s3c2412-iis",
- .id = -1,
- .dev = {
- .dma_mask = &samsung_device_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-#endif /* CONFIG_CPU_S3C2440 */
-
/* IDE CFCON */
#ifdef CONFIG_SAMSUNG_DEV_IDE
@@ -769,7 +805,7 @@
.resource = s3c_cfcon_resource,
};
-void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
+void __init s3c_ide_set_platdata(struct s3c_ide_platdata *pdata)
{
s3c_set_platdata(pdata, sizeof(struct s3c_ide_platdata),
&s3c_device_cfcon);
@@ -887,7 +923,7 @@
#ifdef CONFIG_S5P_DEV_CSIS0
static struct resource s5p_mipi_csis0_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_4K),
+ [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS0, SZ_16K),
[1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS0),
};
@@ -901,7 +937,7 @@
#ifdef CONFIG_S5P_DEV_CSIS1
static struct resource s5p_mipi_csis1_resource[] = {
- [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_4K),
+ [0] = DEFINE_RES_MEM(S5P_PA_MIPI_CSIS1, SZ_16K),
[1] = DEFINE_RES_IRQ(IRQ_MIPI_CSIS1),
};
@@ -1049,7 +1085,7 @@
.resource = s3c64xx_onenand1_resources,
};
-void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
+void __init s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
{
s3c_set_platdata(pdata, sizeof(struct onenand_platform_data),
&s3c64xx_device_onenand1);
@@ -1078,7 +1114,7 @@
DEFINE_RES_IRQ(IRQ_PMU)
};
-struct platform_device s5p_device_pmu = {
+static struct platform_device s5p_device_pmu = {
.name = "arm-pmu",
.id = ARM_PMU_DEVICE_CPU,
.num_resources = ARRAY_SIZE(s5p_pmu_resource),
@@ -1423,6 +1459,19 @@
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
+
+void __init s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd)
+{
+ struct s3c_hsotg_plat *npd;
+
+ npd = s3c_set_platdata(pd, sizeof(struct s3c_hsotg_plat),
+ &s3c_device_usb_hsotg);
+
+ if (!npd->phy_init)
+ npd->phy_init = s5p_usb_phy_init;
+ if (!npd->phy_exit)
+ npd->phy_exit = s5p_usb_phy_exit;
+}
#endif /* CONFIG_S3C_DEV_USB_HSOTG */
/* USB High Spped 2.0 Device (Gadget) */
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index 0747c77..301d9c3 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -116,7 +116,7 @@
return dmaengine_terminate_all((struct dma_chan *)ch);
}
-struct samsung_dma_ops dmadev_ops = {
+static struct samsung_dma_ops dmadev_ops = {
.request = samsung_dmadev_request,
.release = samsung_dmadev_release,
.prepare = samsung_dmadev_prepare,
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 73cb3cf..787ceac 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -42,6 +42,9 @@
#define EXYNOS4412_CPU_ID 0xE4412200
#define EXYNOS4_CPU_MASK 0xFFFE0000
+#define EXYNOS5250_SOC_ID 0x43520000
+#define EXYNOS5_SOC_MASK 0xFFFFF000
+
#define IS_SAMSUNG_CPU(name, id, mask) \
static inline int is_samsung_##name(void) \
{ \
@@ -58,6 +61,7 @@
IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
@@ -120,6 +124,12 @@
#define EXYNOS4210_REV_1_0 (0x10)
#define EXYNOS4210_REV_1_1 (0x11)
+#if defined(CONFIG_SOC_EXYNOS5250)
+# define soc_is_exynos5250() is_samsung_exynos5250()
+#else
+# define soc_is_exynos5250() 0
+#endif
+
#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef MHZ
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 4214ea0..2155d4a 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -26,6 +26,8 @@
extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
extern struct s3c24xx_uart_resources s5p_uart_resources[];
+extern struct s3c24xx_uart_resources exynos4_uart_resources[];
+extern struct s3c24xx_uart_resources exynos5_uart_resources[];
extern struct platform_device *s3c24xx_uart_devs[];
extern struct platform_device *s3c24xx_uart_src[];
@@ -79,6 +81,8 @@
extern struct platform_device s5p_device_fimc2;
extern struct platform_device s5p_device_fimc3;
extern struct platform_device s5p_device_fimc_md;
+extern struct platform_device s5p_device_jpeg;
+extern struct platform_device s5p_device_g2d;
extern struct platform_device s5p_device_fimd0;
extern struct platform_device s5p_device_hdmi;
extern struct platform_device s5p_device_i2c_hdmiphy;
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
index c5eaad5..0670f37 100644
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -82,6 +82,22 @@
DMACH_SLIMBUS4_TX,
DMACH_SLIMBUS5_RX,
DMACH_SLIMBUS5_TX,
+ DMACH_MIPI_HSI0,
+ DMACH_MIPI_HSI1,
+ DMACH_MIPI_HSI2,
+ DMACH_MIPI_HSI3,
+ DMACH_MIPI_HSI4,
+ DMACH_MIPI_HSI5,
+ DMACH_MIPI_HSI6,
+ DMACH_MIPI_HSI7,
+ DMACH_MTOM_0,
+ DMACH_MTOM_1,
+ DMACH_MTOM_2,
+ DMACH_MTOM_3,
+ DMACH_MTOM_4,
+ DMACH_MTOM_5,
+ DMACH_MTOM_6,
+ DMACH_MTOM_7,
/* END Marker, also used to denote a reserved channel */
DMACH_MAX,
};
diff --git a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
index a111ad8..fcf2796 100644
--- a/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
+++ b/arch/arm/plat-samsung/include/plat/regs-usb-hsotg-phy.h
@@ -25,8 +25,9 @@
#define S3C_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
#define S3C_PHYPWR S3C_HSOTG_PHYREG(0x00)
-#define SRC_PHYPWR_OTG_DISABLE (1 << 4)
-#define SRC_PHYPWR_ANALOG_POWERDOWN (1 << 3)
+#define S3C_PHYPWR_NORMAL_MASK (0x19 << 0)
+#define S3C_PHYPWR_OTG_DISABLE (1 << 4)
+#define S3C_PHYPWR_ANALOG_POWERDOWN (1 << 3)
#define SRC_PHYPWR_FORCE_SUSPEND (1 << 1)
#define S3C_PHYCLK S3C_HSOTG_PHYREG(0x04)
@@ -42,7 +43,7 @@
#define S3C_RSTCON S3C_HSOTG_PHYREG(0x08)
#define S3C_RSTCON_PHYCLK (1 << 2)
-#define S3C_RSTCON_HCLK (1 << 2)
+#define S3C_RSTCON_HCLK (1 << 1)
#define S3C_RSTCON_PHY (1 << 0)
#define S3C_PHYTUNE S3C_HSOTG_PHYREG(0x20)
diff --git a/arch/arm/plat-samsung/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h
index 984bf9e..1de4b32 100644
--- a/arch/arm/plat-samsung/include/plat/s5p-clock.h
+++ b/arch/arm/plat-samsung/include/plat/s5p-clock.h
@@ -18,6 +18,8 @@
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_bpll clk_ext_xtal_mux
+#define clk_fin_cpll clk_ext_xtal_mux
#define clk_fin_mpll clk_ext_xtal_mux
#define clk_fin_epll clk_ext_xtal_mux
#define clk_fin_dpll clk_ext_xtal_mux
@@ -29,6 +31,8 @@
extern struct clk clk_48m;
extern struct clk s5p_clk_27m;
extern struct clk clk_fout_apll;
+extern struct clk clk_fout_bpll;
+extern struct clk clk_fout_cpll;
extern struct clk clk_fout_mpll;
extern struct clk clk_fout_epll;
extern struct clk clk_fout_dpll;
@@ -37,6 +41,8 @@
extern struct clk clk_vpll;
extern struct clksrc_sources clk_src_apll;
+extern struct clksrc_sources clk_src_bpll;
+extern struct clksrc_sources clk_src_cpll;
extern struct clksrc_sources clk_src_mpll;
extern struct clksrc_sources clk_src_epll;
extern struct clksrc_sources clk_src_dpll;
diff --git a/arch/arm/plat-samsung/include/plat/udc-hs.h b/arch/arm/plat-samsung/include/plat/udc-hs.h
index a22a4f2..c9e3667 100644
--- a/arch/arm/plat-samsung/include/plat/udc-hs.h
+++ b/arch/arm/plat-samsung/include/plat/udc-hs.h
@@ -26,4 +26,9 @@
struct s3c_hsotg_plat {
enum s3c_hsotg_dmamode dma;
unsigned int is_osc : 1;
+
+ int (*phy_init)(struct platform_device *pdev, int type);
+ int (*phy_exit)(struct platform_device *pdev, int type);
};
+
+extern void s3c_hsotg_set_platdata(struct s3c_hsotg_plat *pd);
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
index ee48e12..7e068d1 100644
--- a/arch/arm/plat-samsung/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -37,7 +37,9 @@
/* how many bytes we allow into the FIFO at a time in FIFO mode */
#define FIFO_MAX (14)
+#ifdef S3C_PA_UART
#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
+#endif
static __inline__ void
uart_wr(unsigned int reg, unsigned int val)
diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c
index 51583cd..f980cf3 100644
--- a/arch/arm/plat-samsung/irq-vic-timer.c
+++ b/arch/arm/plat-samsung/irq-vic-timer.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <mach/map.h>
+#include <plat/cpu.h>
#include <plat/irq-vic-timer.h>
#include <plat/regs-timer.h>
@@ -57,6 +58,21 @@
struct irq_chip_type *ct;
unsigned int i;
+#ifdef CONFIG_ARCH_EXYNOS
+ if (soc_is_exynos5250()) {
+ pirq[0] = EXYNOS5_IRQ_TIMER0_VIC;
+ pirq[1] = EXYNOS5_IRQ_TIMER1_VIC;
+ pirq[2] = EXYNOS5_IRQ_TIMER2_VIC;
+ pirq[3] = EXYNOS5_IRQ_TIMER3_VIC;
+ pirq[4] = EXYNOS5_IRQ_TIMER4_VIC;
+ } else {
+ pirq[0] = EXYNOS4_IRQ_TIMER0_VIC;
+ pirq[1] = EXYNOS4_IRQ_TIMER1_VIC;
+ pirq[2] = EXYNOS4_IRQ_TIMER2_VIC;
+ pirq[3] = EXYNOS4_IRQ_TIMER3_VIC;
+ pirq[4] = EXYNOS4_IRQ_TIMER4_VIC;
+ }
+#endif
s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq,
S3C64XX_TINT_CSTAT, handle_level_irq);
diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h
deleted file mode 100644
index 86c6f83..0000000
--- a/arch/arm/plat-spear/include/plat/system.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/system.h
- *
- * SPEAr platform specific architecture functions
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_SYSTEM_H
-#define __PLAT_SYSTEM_H
-
-static inline void arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-#endif /* __PLAT_SYSTEM_H */
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 5bed94e1..6339aa4 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -179,6 +179,9 @@
config ARCH_HAS_CACHE_LINE_SIZE
def_bool y
+config ARCH_HAS_CPU_AUTOPROBE
+ def_bool y
+
config HAVE_SETUP_PER_CPU_AREA
def_bool y
diff --git a/arch/x86/crypto/aesni-intel_glue.c b/arch/x86/crypto/aesni-intel_glue.c
index 545d0ce..b3350bd 100644
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -28,6 +28,7 @@
#include <crypto/aes.h>
#include <crypto/cryptd.h>
#include <crypto/ctr.h>
+#include <asm/cpu_device_id.h>
#include <asm/i387.h>
#include <asm/aes.h>
#include <crypto/scatterwalk.h>
@@ -1253,14 +1254,19 @@
};
#endif
+
+static const struct x86_cpu_id aesni_cpu_id[] = {
+ X86_FEATURE_MATCH(X86_FEATURE_AES),
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, aesni_cpu_id);
+
static int __init aesni_init(void)
{
int err;
- if (!cpu_has_aes) {
- printk(KERN_INFO "Intel AES-NI instructions are not detected.\n");
+ if (!x86_match_cpu(aesni_cpu_id))
return -ENODEV;
- }
if ((err = crypto_fpu_init()))
goto fpu_err;
diff --git a/arch/x86/crypto/crc32c-intel.c b/arch/x86/crypto/crc32c-intel.c
index b9d0026..493f959 100644
--- a/arch/x86/crypto/crc32c-intel.c
+++ b/arch/x86/crypto/crc32c-intel.c
@@ -31,6 +31,7 @@
#include <crypto/internal/hash.h>
#include <asm/cpufeature.h>
+#include <asm/cpu_device_id.h>
#define CHKSUM_BLOCK_SIZE 1
#define CHKSUM_DIGEST_SIZE 4
@@ -173,13 +174,17 @@
}
};
+static const struct x86_cpu_id crc32c_cpu_id[] = {
+ X86_FEATURE_MATCH(X86_FEATURE_XMM4_2),
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, crc32c_cpu_id);
static int __init crc32c_intel_mod_init(void)
{
- if (cpu_has_xmm4_2)
- return crypto_register_shash(&alg);
- else
+ if (!x86_match_cpu(crc32c_cpu_id))
return -ENODEV;
+ return crypto_register_shash(&alg);
}
static void __exit crc32c_intel_mod_fini(void)
diff --git a/arch/x86/crypto/ghash-clmulni-intel_glue.c b/arch/x86/crypto/ghash-clmulni-intel_glue.c
index 976aa64..b4bf0a6 100644
--- a/arch/x86/crypto/ghash-clmulni-intel_glue.c
+++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c
@@ -20,6 +20,7 @@
#include <crypto/gf128mul.h>
#include <crypto/internal/hash.h>
#include <asm/i387.h>
+#include <asm/cpu_device_id.h>
#define GHASH_BLOCK_SIZE 16
#define GHASH_DIGEST_SIZE 16
@@ -294,15 +295,18 @@
},
};
+static const struct x86_cpu_id pcmul_cpu_id[] = {
+ X86_FEATURE_MATCH(X86_FEATURE_PCLMULQDQ), /* Pickle-Mickle-Duck */
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, pcmul_cpu_id);
+
static int __init ghash_pclmulqdqni_mod_init(void)
{
int err;
- if (!cpu_has_pclmulqdq) {
- printk(KERN_INFO "Intel PCLMULQDQ-NI instructions are not"
- " detected.\n");
+ if (!x86_match_cpu(pcmul_cpu_id))
return -ENODEV;
- }
err = crypto_register_shash(&ghash_alg);
if (err)
diff --git a/arch/x86/include/asm/cpu_device_id.h b/arch/x86/include/asm/cpu_device_id.h
new file mode 100644
index 0000000..ff501e5
--- /dev/null
+++ b/arch/x86/include/asm/cpu_device_id.h
@@ -0,0 +1,13 @@
+#ifndef _CPU_DEVICE_ID
+#define _CPU_DEVICE_ID 1
+
+/*
+ * Declare drivers belonging to specific x86 CPUs
+ * Similar in spirit to pci_device_id and related PCI functions
+ */
+
+#include <linux/mod_devicetable.h>
+
+extern const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match);
+
+#endif
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 8d67d42..dcb839e 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -177,6 +177,7 @@
#define X86_FEATURE_PLN (7*32+ 5) /* Intel Power Limit Notification */
#define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */
#define X86_FEATURE_DTS (7*32+ 7) /* Digital Thermal Sensor */
+#define X86_FEATURE_HW_PSTATE (7*32+ 8) /* AMD HW-PState */
/* Virtualization flags: Linux defined, word 8 */
#define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 25f24dc..6ab6aa2 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -16,6 +16,7 @@
obj-y += proc.o capflags.o powerflags.o common.o
obj-y += vmware.o hypervisor.o sched.o mshyperv.o
obj-y += rdrand.o
+obj-y += match.o
obj-$(CONFIG_X86_32) += bugs.o
obj-$(CONFIG_X86_64) += bugs_64.o
diff --git a/arch/x86/kernel/cpu/match.c b/arch/x86/kernel/cpu/match.c
new file mode 100644
index 0000000..940e2d4
--- /dev/null
+++ b/arch/x86/kernel/cpu/match.c
@@ -0,0 +1,92 @@
+#include <asm/cpu_device_id.h>
+#include <asm/processor.h>
+#include <linux/cpu.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+/**
+ * x86_match_cpu - match current CPU again an array of x86_cpu_ids
+ * @match: Pointer to array of x86_cpu_ids. Last entry terminated with
+ * {}.
+ *
+ * Return the entry if the current CPU matches the entries in the
+ * passed x86_cpu_id match table. Otherwise NULL. The match table
+ * contains vendor (X86_VENDOR_*), family, model and feature bits or
+ * respective wildcard entries.
+ *
+ * A typical table entry would be to match a specific CPU
+ * { X86_VENDOR_INTEL, 6, 0x12 }
+ * or to match a specific CPU feature
+ * { X86_FEATURE_MATCH(X86_FEATURE_FOOBAR) }
+ *
+ * Fields can be wildcarded with %X86_VENDOR_ANY, %X86_FAMILY_ANY,
+ * %X86_MODEL_ANY, %X86_FEATURE_ANY or 0 (except for vendor)
+ *
+ * Arrays used to match for this should also be declared using
+ * MODULE_DEVICE_TABLE(x86_cpu, ...)
+ *
+ * This always matches against the boot cpu, assuming models and features are
+ * consistent over all CPUs.
+ */
+const struct x86_cpu_id *x86_match_cpu(const struct x86_cpu_id *match)
+{
+ const struct x86_cpu_id *m;
+ struct cpuinfo_x86 *c = &boot_cpu_data;
+
+ for (m = match; m->vendor | m->family | m->model | m->feature; m++) {
+ if (m->vendor != X86_VENDOR_ANY && c->x86_vendor != m->vendor)
+ continue;
+ if (m->family != X86_FAMILY_ANY && c->x86 != m->family)
+ continue;
+ if (m->model != X86_MODEL_ANY && c->x86_model != m->model)
+ continue;
+ if (m->feature != X86_FEATURE_ANY && !cpu_has(c, m->feature))
+ continue;
+ return m;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL(x86_match_cpu);
+
+ssize_t arch_print_cpu_modalias(struct device *dev,
+ struct device_attribute *attr,
+ char *bufptr)
+{
+ int size = PAGE_SIZE;
+ int i, n;
+ char *buf = bufptr;
+
+ n = snprintf(buf, size, "x86cpu:vendor:%04X:family:%04X:"
+ "model:%04X:feature:",
+ boot_cpu_data.x86_vendor,
+ boot_cpu_data.x86,
+ boot_cpu_data.x86_model);
+ size -= n;
+ buf += n;
+ size -= 2;
+ for (i = 0; i < NCAPINTS*32; i++) {
+ if (boot_cpu_has(i)) {
+ n = snprintf(buf, size, ",%04X", i);
+ if (n < 0) {
+ WARN(1, "x86 features overflow page\n");
+ break;
+ }
+ size -= n;
+ buf += n;
+ }
+ }
+ *buf++ = ',';
+ *buf++ = '\n';
+ return buf - bufptr;
+}
+
+int arch_cpu_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ char *buf = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ if (buf) {
+ arch_print_cpu_modalias(NULL, NULL, buf);
+ add_uevent_var(env, "MODALIAS=%s", buf);
+ kfree(buf);
+ }
+ return 0;
+}
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
index c7f64e6..addf9e8 100644
--- a/arch/x86/kernel/cpu/scattered.c
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -40,6 +40,7 @@
{ X86_FEATURE_EPB, CR_ECX, 3, 0x00000006, 0 },
{ X86_FEATURE_XSAVEOPT, CR_EAX, 0, 0x0000000d, 1 },
{ X86_FEATURE_CPB, CR_EDX, 9, 0x80000007, 0 },
+ { X86_FEATURE_HW_PSTATE, CR_EDX, 7, 0x80000007, 0 },
{ X86_FEATURE_NPT, CR_EDX, 0, 0x8000000a, 0 },
{ X86_FEATURE_LBRV, CR_EDX, 1, 0x8000000a, 0 },
{ X86_FEATURE_SVML, CR_EDX, 2, 0x8000000a, 0 },
diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c
index fda91c3..87a0f86 100644
--- a/arch/x86/kernel/microcode_core.c
+++ b/arch/x86/kernel/microcode_core.c
@@ -86,6 +86,7 @@
#include <asm/microcode.h>
#include <asm/processor.h>
+#include <asm/cpu_device_id.h>
MODULE_DESCRIPTION("Microcode Update Driver");
MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
@@ -504,6 +505,20 @@
.notifier_call = mc_cpu_callback,
};
+#ifdef MODULE
+/* Autoload on Intel and AMD systems */
+static const struct x86_cpu_id microcode_id[] = {
+#ifdef CONFIG_MICROCODE_INTEL
+ { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, },
+#endif
+#ifdef CONFIG_MICROCODE_AMD
+ { X86_VENDOR_AMD, X86_FAMILY_ANY, X86_MODEL_ANY, },
+#endif
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, microcode_id);
+#endif
+
static int __init microcode_init(void)
{
struct cpuinfo_x86 *c = &cpu_data(0);
diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c
index 8ae05ce..2801b41 100644
--- a/drivers/acpi/processor_driver.c
+++ b/drivers/acpi/processor_driver.c
@@ -474,6 +474,7 @@
#ifdef CONFIG_CPU_FREQ
acpi_processor_ppc_has_changed(pr, 0);
+ acpi_processor_load_module(pr);
#endif
acpi_processor_get_throttling_info(pr);
acpi_processor_get_limit_info(pr);
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 85b3237..0af48a8 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -240,6 +240,28 @@
acpi_processor_ppc_status &= ~PPC_REGISTERED;
}
+/*
+ * Do a quick check if the systems looks like it should use ACPI
+ * cpufreq. We look at a _PCT method being available, but don't
+ * do a whole lot of sanity checks.
+ */
+void acpi_processor_load_module(struct acpi_processor *pr)
+{
+ static int requested;
+ acpi_status status = 0;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+
+ if (!arch_has_acpi_pdc() || requested)
+ return;
+ status = acpi_evaluate_object(pr->handle, "_PCT", NULL, &buffer);
+ if (!ACPI_FAILURE(status)) {
+ printk(KERN_INFO PREFIX "Requesting acpi_cpufreq\n");
+ request_module_nowait("acpi_cpufreq");
+ requested = 1;
+ }
+ kfree(buffer.pointer);
+}
+
static int acpi_processor_get_performance_control(struct acpi_processor *pr)
{
int result = 0;
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 54eaf96..01c2cf4 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -497,37 +497,22 @@
}
/**
- * amba_device_register - register an AMBA device
- * @dev: AMBA device to register
- * @parent: parent memory resource
+ * amba_device_add - add a previously allocated AMBA device structure
+ * @dev: AMBA device allocated by amba_device_alloc
+ * @parent: resource parent for this devices resources
*
- * Setup the AMBA device, reading the cell ID if present.
- * Claim the resource, and register the AMBA device with
- * the Linux device manager.
+ * Claim the resource, and read the device cell ID if not already
+ * initialized. Register the AMBA device with the Linux device
+ * manager.
*/
-int amba_device_register(struct amba_device *dev, struct resource *parent)
+int amba_device_add(struct amba_device *dev, struct resource *parent)
{
u32 size;
void __iomem *tmp;
int i, ret;
- device_initialize(&dev->dev);
-
- /*
- * Copy from device_add
- */
- if (dev->dev.init_name) {
- dev_set_name(&dev->dev, "%s", dev->dev.init_name);
- dev->dev.init_name = NULL;
- }
-
- dev->dev.release = amba_device_release;
- dev->dev.bus = &amba_bustype;
- dev->dev.dma_mask = &dev->dma_mask;
- dev->res.name = dev_name(&dev->dev);
-
- if (!dev->dev.coherent_dma_mask && dev->dma_mask)
- dev_warn(&dev->dev, "coherent dma mask is unset\n");
+ WARN_ON(dev->irq[0] == (unsigned int)-1);
+ WARN_ON(dev->irq[1] == (unsigned int)-1);
ret = request_resource(parent, &dev->res);
if (ret)
@@ -582,9 +567,9 @@
if (ret)
goto err_release;
- if (dev->irq[0] != NO_IRQ)
+ if (dev->irq[0] && dev->irq[0] != NO_IRQ)
ret = device_create_file(&dev->dev, &dev_attr_irq0);
- if (ret == 0 && dev->irq[1] != NO_IRQ)
+ if (ret == 0 && dev->irq[1] && dev->irq[1] != NO_IRQ)
ret = device_create_file(&dev->dev, &dev_attr_irq1);
if (ret == 0)
return ret;
@@ -596,6 +581,74 @@
err_out:
return ret;
}
+EXPORT_SYMBOL_GPL(amba_device_add);
+
+static void amba_device_initialize(struct amba_device *dev, const char *name)
+{
+ device_initialize(&dev->dev);
+ if (name)
+ dev_set_name(&dev->dev, "%s", name);
+ dev->dev.release = amba_device_release;
+ dev->dev.bus = &amba_bustype;
+ dev->dev.dma_mask = &dev->dma_mask;
+ dev->res.name = dev_name(&dev->dev);
+}
+
+/**
+ * amba_device_alloc - allocate an AMBA device
+ * @name: sysfs name of the AMBA device
+ * @base: base of AMBA device
+ * @size: size of AMBA device
+ *
+ * Allocate and initialize an AMBA device structure. Returns %NULL
+ * on failure.
+ */
+struct amba_device *amba_device_alloc(const char *name, resource_size_t base,
+ size_t size)
+{
+ struct amba_device *dev;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev) {
+ amba_device_initialize(dev, name);
+ dev->res.start = base;
+ dev->res.end = base + size - 1;
+ dev->res.flags = IORESOURCE_MEM;
+ }
+
+ return dev;
+}
+EXPORT_SYMBOL_GPL(amba_device_alloc);
+
+/**
+ * amba_device_register - register an AMBA device
+ * @dev: AMBA device to register
+ * @parent: parent memory resource
+ *
+ * Setup the AMBA device, reading the cell ID if present.
+ * Claim the resource, and register the AMBA device with
+ * the Linux device manager.
+ */
+int amba_device_register(struct amba_device *dev, struct resource *parent)
+{
+ amba_device_initialize(dev, dev->dev.init_name);
+ dev->dev.init_name = NULL;
+
+ if (!dev->dev.coherent_dma_mask && dev->dma_mask)
+ dev_warn(&dev->dev, "coherent dma mask is unset\n");
+
+ return amba_device_add(dev, parent);
+}
+
+/**
+ * amba_device_put - put an AMBA device
+ * @dev: AMBA device to put
+ */
+void amba_device_put(struct amba_device *dev)
+{
+ put_device(&dev->dev);
+}
+EXPORT_SYMBOL_GPL(amba_device_put);
/**
* amba_device_unregister - unregister an AMBA device
diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig
index 7be9f79..9aa618a 100644
--- a/drivers/base/Kconfig
+++ b/drivers/base/Kconfig
@@ -176,6 +176,9 @@
bool
default n
+config SOC_BUS
+ bool
+
source "drivers/base/regmap/Kconfig"
config DMA_SHARED_BUFFER
diff --git a/drivers/base/Makefile b/drivers/base/Makefile
index 610f999..b6d1b9c 100644
--- a/drivers/base/Makefile
+++ b/drivers/base/Makefile
@@ -19,6 +19,7 @@
endif
obj-$(CONFIG_SYS_HYPERVISOR) += hypervisor.o
obj-$(CONFIG_REGMAP) += regmap/
+obj-$(CONFIG_SOC_BUS) += soc.o
ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 40fb122..26a06b8 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -1194,13 +1194,15 @@
void subsys_interface_unregister(struct subsys_interface *sif)
{
- struct bus_type *subsys = sif->subsys;
+ struct bus_type *subsys;
struct subsys_dev_iter iter;
struct device *dev;
- if (!sif)
+ if (!sif || !sif->subsys)
return;
+ subsys = sif->subsys;
+
mutex_lock(&subsys->p->mutex);
list_del_init(&sif->node);
if (sif->remove_dev) {
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index 4dabf50..adf937b 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -11,6 +11,7 @@
#include <linux/device.h>
#include <linux/node.h>
#include <linux/gfp.h>
+#include <linux/slab.h>
#include <linux/percpu.h>
#include "base.h"
@@ -244,6 +245,9 @@
cpu->dev.id = num;
cpu->dev.bus = &cpu_subsys;
cpu->dev.release = cpu_device_release;
+#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
+ cpu->dev.bus->uevent = arch_cpu_uevent;
+#endif
error = device_register(&cpu->dev);
if (!error && cpu->hotpluggable)
register_cpu_control(cpu);
@@ -268,6 +272,10 @@
}
EXPORT_SYMBOL_GPL(get_cpu_device);
+#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
+static DEVICE_ATTR(modalias, 0444, arch_print_cpu_modalias, NULL);
+#endif
+
static struct attribute *cpu_root_attrs[] = {
#ifdef CONFIG_ARCH_CPU_PROBE_RELEASE
&dev_attr_probe.attr,
@@ -278,6 +286,9 @@
&cpu_attrs[2].attr.attr,
&dev_attr_kernel_max.attr,
&dev_attr_offline.attr,
+#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
+ &dev_attr_modalias.attr,
+#endif
NULL
};
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index b631f7c..60e4f77 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -153,34 +153,6 @@
}
EXPORT_SYMBOL_GPL(driver_add_kobj);
-/**
- * get_driver - increment driver reference count.
- * @drv: driver.
- */
-struct device_driver *get_driver(struct device_driver *drv)
-{
- if (drv) {
- struct driver_private *priv;
- struct kobject *kobj;
-
- kobj = kobject_get(&drv->p->kobj);
- priv = to_driver(kobj);
- return priv->driver;
- }
- return NULL;
-}
-EXPORT_SYMBOL_GPL(get_driver);
-
-/**
- * put_driver - decrement driver's refcount.
- * @drv: driver.
- */
-void put_driver(struct device_driver *drv)
-{
- kobject_put(&drv->p->kobj);
-}
-EXPORT_SYMBOL_GPL(put_driver);
-
static int driver_add_groups(struct device_driver *drv,
const struct attribute_group **groups)
{
@@ -234,7 +206,6 @@
other = driver_find(drv->name, drv->bus);
if (other) {
- put_driver(other);
printk(KERN_ERR "Error: Driver '%s' is already registered, "
"aborting...\n", drv->name);
return -EBUSY;
@@ -275,7 +246,9 @@
* Call kset_find_obj() to iterate over list of drivers on
* a bus to find driver by name. Return driver if found.
*
- * Note that kset_find_obj increments driver's reference count.
+ * This routine provides no locking to prevent the driver it returns
+ * from being unregistered or unloaded while the caller is using it.
+ * The caller is responsible for preventing this.
*/
struct device_driver *driver_find(const char *name, struct bus_type *bus)
{
@@ -283,6 +256,8 @@
struct driver_private *priv;
if (k) {
+ /* Drop reference added by kset_find_obj() */
+ kobject_put(k);
priv = to_driver(k);
return priv->driver;
}
diff --git a/drivers/base/soc.c b/drivers/base/soc.c
new file mode 100644
index 0000000..05f1503
--- /dev/null
+++ b/drivers/base/soc.c
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/stat.h>
+#include <linux/slab.h>
+#include <linux/idr.h>
+#include <linux/spinlock.h>
+#include <linux/sys_soc.h>
+#include <linux/err.h>
+
+static DEFINE_IDR(soc_ida);
+static DEFINE_SPINLOCK(soc_lock);
+
+static ssize_t soc_info_get(struct device *dev,
+ struct device_attribute *attr,
+ char *buf);
+
+struct soc_device {
+ struct device dev;
+ struct soc_device_attribute *attr;
+ int soc_dev_num;
+};
+
+static struct bus_type soc_bus_type = {
+ .name = "soc",
+};
+
+static DEVICE_ATTR(machine, S_IRUGO, soc_info_get, NULL);
+static DEVICE_ATTR(family, S_IRUGO, soc_info_get, NULL);
+static DEVICE_ATTR(soc_id, S_IRUGO, soc_info_get, NULL);
+static DEVICE_ATTR(revision, S_IRUGO, soc_info_get, NULL);
+
+struct device *soc_device_to_device(struct soc_device *soc_dev)
+{
+ return &soc_dev->dev;
+}
+
+static mode_t soc_attribute_mode(struct kobject *kobj,
+ struct attribute *attr,
+ int index)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
+
+ if ((attr == &dev_attr_machine.attr)
+ && (soc_dev->attr->machine != NULL))
+ return attr->mode;
+ if ((attr == &dev_attr_family.attr)
+ && (soc_dev->attr->family != NULL))
+ return attr->mode;
+ if ((attr == &dev_attr_revision.attr)
+ && (soc_dev->attr->revision != NULL))
+ return attr->mode;
+ if ((attr == &dev_attr_soc_id.attr)
+ && (soc_dev->attr->soc_id != NULL))
+ return attr->mode;
+
+ /* Unknown or unfilled attribute. */
+ return 0;
+}
+
+static ssize_t soc_info_get(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
+
+ if (attr == &dev_attr_machine)
+ return sprintf(buf, "%s\n", soc_dev->attr->machine);
+ if (attr == &dev_attr_family)
+ return sprintf(buf, "%s\n", soc_dev->attr->family);
+ if (attr == &dev_attr_revision)
+ return sprintf(buf, "%s\n", soc_dev->attr->revision);
+ if (attr == &dev_attr_soc_id)
+ return sprintf(buf, "%s\n", soc_dev->attr->soc_id);
+
+ return -EINVAL;
+
+}
+
+static struct attribute *soc_attr[] = {
+ &dev_attr_machine.attr,
+ &dev_attr_family.attr,
+ &dev_attr_soc_id.attr,
+ &dev_attr_revision.attr,
+ NULL,
+};
+
+static const struct attribute_group soc_attr_group = {
+ .attrs = soc_attr,
+ .is_visible = soc_attribute_mode,
+};
+
+static const struct attribute_group *soc_attr_groups[] = {
+ &soc_attr_group,
+ NULL,
+};
+
+static void soc_release(struct device *dev)
+{
+ struct soc_device *soc_dev = container_of(dev, struct soc_device, dev);
+
+ kfree(soc_dev);
+}
+
+struct soc_device *soc_device_register(struct soc_device_attribute *soc_dev_attr)
+{
+ struct soc_device *soc_dev;
+ int ret;
+
+ soc_dev = kzalloc(sizeof(*soc_dev), GFP_KERNEL);
+ if (!soc_dev) {
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ /* Fetch a unique (reclaimable) SOC ID. */
+ do {
+ if (!ida_pre_get(&soc_ida, GFP_KERNEL)) {
+ ret = -ENOMEM;
+ goto out2;
+ }
+
+ spin_lock(&soc_lock);
+ ret = ida_get_new(&soc_ida, &soc_dev->soc_dev_num);
+ spin_unlock(&soc_lock);
+
+ } while (ret == -EAGAIN);
+
+ if (ret)
+ goto out2;
+
+ soc_dev->attr = soc_dev_attr;
+ soc_dev->dev.bus = &soc_bus_type;
+ soc_dev->dev.groups = soc_attr_groups;
+ soc_dev->dev.release = soc_release;
+
+ dev_set_name(&soc_dev->dev, "soc%d", soc_dev->soc_dev_num);
+
+ ret = device_register(&soc_dev->dev);
+ if (ret)
+ goto out3;
+
+ return soc_dev;
+
+out3:
+ ida_remove(&soc_ida, soc_dev->soc_dev_num);
+out2:
+ kfree(soc_dev);
+out1:
+ return ERR_PTR(ret);
+}
+
+/* Ensure soc_dev->attr is freed prior to calling soc_device_unregister. */
+void soc_device_unregister(struct soc_device *soc_dev)
+{
+ ida_remove(&soc_ida, soc_dev->soc_dev_num);
+
+ device_unregister(&soc_dev->dev);
+}
+
+static int __init soc_bus_register(void)
+{
+ spin_lock_init(&soc_lock);
+
+ return bus_register(&soc_bus_type);
+}
+core_initcall(soc_bus_register);
+
+static void __exit soc_bus_unregister(void)
+{
+ ida_destroy(&soc_ida);
+
+ bus_unregister(&soc_bus_type);
+}
+module_exit(soc_bus_unregister);
diff --git a/drivers/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c
index 7bac808..13d311e 100644
--- a/drivers/cpufreq/cpufreq-nforce2.c
+++ b/drivers/cpufreq/cpufreq-nforce2.c
@@ -385,6 +385,14 @@
.owner = THIS_MODULE,
};
+#ifdef MODULE
+static DEFINE_PCI_DEVICE_TABLE(nforce2_ids) = {
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2 },
+ {}
+};
+MODULE_DEVICE_TABLE(pci, nforce2_ids);
+#endif
+
/**
* nforce2_detect_chipset - detect the Southbridge which contains FSB PLL logic
*
diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c
index 4bd6815..3fffbe6 100644
--- a/drivers/cpufreq/e_powersaver.c
+++ b/drivers/cpufreq/e_powersaver.c
@@ -16,6 +16,7 @@
#include <linux/io.h>
#include <linux/delay.h>
+#include <asm/cpu_device_id.h>
#include <asm/msr.h>
#include <asm/tsc.h>
@@ -437,18 +438,19 @@
.attr = eps_attr,
};
+
+/* This driver will work only on Centaur C7 processors with
+ * Enhanced SpeedStep/PowerSaver registers */
+static const struct x86_cpu_id eps_cpu_id[] = {
+ { X86_VENDOR_CENTAUR, 6, X86_MODEL_ANY, X86_FEATURE_EST },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, eps_cpu_id);
+
static int __init eps_init(void)
{
- struct cpuinfo_x86 *c = &cpu_data(0);
-
- /* This driver will work only on Centaur C7 processors with
- * Enhanced SpeedStep/PowerSaver registers */
- if (c->x86_vendor != X86_VENDOR_CENTAUR
- || c->x86 != 6 || c->x86_model < 10)
+ if (!x86_match_cpu(eps_cpu_id) || boot_cpu_data.x86_model < 10)
return -ENODEV;
- if (!cpu_has(c, X86_FEATURE_EST))
- return -ENODEV;
-
if (cpufreq_register_driver(&eps_driver))
return -EINVAL;
return 0;
diff --git a/drivers/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c
index c587db4..960671f 100644
--- a/drivers/cpufreq/elanfreq.c
+++ b/drivers/cpufreq/elanfreq.c
@@ -23,6 +23,7 @@
#include <linux/delay.h>
#include <linux/cpufreq.h>
+#include <asm/cpu_device_id.h>
#include <asm/msr.h>
#include <linux/timex.h>
#include <linux/io.h>
@@ -277,17 +278,16 @@
.attr = elanfreq_attr,
};
+static const struct x86_cpu_id elan_id[] = {
+ { X86_VENDOR_AMD, 4, 10, },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, elan_id);
static int __init elanfreq_init(void)
{
- struct cpuinfo_x86 *c = &cpu_data(0);
-
- /* Test if we have the right hardware */
- if ((c->x86_vendor != X86_VENDOR_AMD) ||
- (c->x86 != 4) || (c->x86_model != 10)) {
- printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
+ if (!x86_match_cpu(elan_id))
return -ENODEV;
- }
return cpufreq_register_driver(&elanfreq_driver);
}
diff --git a/drivers/cpufreq/gx-suspmod.c b/drivers/cpufreq/gx-suspmod.c
index ffe1f2c..456bee0 100644
--- a/drivers/cpufreq/gx-suspmod.c
+++ b/drivers/cpufreq/gx-suspmod.c
@@ -82,6 +82,7 @@
#include <linux/errno.h>
#include <linux/slab.h>
+#include <asm/cpu_device_id.h>
#include <asm/processor-cyrix.h>
/* PCI config registers, all at F0 */
@@ -171,6 +172,7 @@
{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), },
{ 0, },
};
+MODULE_DEVICE_TABLE(pci, gx_chipset_tbl);
static void gx_write_byte(int reg, int value)
{
@@ -185,13 +187,6 @@
{
struct pci_dev *gx_pci = NULL;
- /* check if CPU is a MediaGX or a Geode. */
- if ((boot_cpu_data.x86_vendor != X86_VENDOR_NSC) &&
- (boot_cpu_data.x86_vendor != X86_VENDOR_CYRIX)) {
- pr_debug("error: no MediaGX/Geode processor found!\n");
- return NULL;
- }
-
/* detect which companion chip is used */
for_each_pci_dev(gx_pci) {
if ((pci_match_id(gx_chipset_tbl, gx_pci)) != NULL)
diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index f47d26e..53ddbc7 100644
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -35,6 +35,7 @@
#include <linux/acpi.h>
#include <asm/msr.h>
+#include <asm/cpu_device_id.h>
#include <acpi/processor.h>
#include "longhaul.h"
@@ -951,12 +952,17 @@
.attr = longhaul_attr,
};
+static const struct x86_cpu_id longhaul_id[] = {
+ { X86_VENDOR_CENTAUR, 6 },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, longhaul_id);
static int __init longhaul_init(void)
{
struct cpuinfo_x86 *c = &cpu_data(0);
- if (c->x86_vendor != X86_VENDOR_CENTAUR || c->x86 != 6)
+ if (!x86_match_cpu(longhaul_id))
return -ENODEV;
#ifdef CONFIG_SMP
diff --git a/drivers/cpufreq/longrun.c b/drivers/cpufreq/longrun.c
index 34ea359..8bc9f5f 100644
--- a/drivers/cpufreq/longrun.c
+++ b/drivers/cpufreq/longrun.c
@@ -14,6 +14,7 @@
#include <asm/msr.h>
#include <asm/processor.h>
+#include <asm/cpu_device_id.h>
static struct cpufreq_driver longrun_driver;
@@ -288,6 +289,12 @@
.owner = THIS_MODULE,
};
+static const struct x86_cpu_id longrun_ids[] = {
+ { X86_VENDOR_TRANSMETA, X86_FAMILY_ANY, X86_MODEL_ANY,
+ X86_FEATURE_LONGRUN },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, longrun_ids);
/**
* longrun_init - initializes the Transmeta Crusoe LongRun CPUFreq driver
@@ -296,12 +303,8 @@
*/
static int __init longrun_init(void)
{
- struct cpuinfo_x86 *c = &cpu_data(0);
-
- if (c->x86_vendor != X86_VENDOR_TRANSMETA ||
- !cpu_has(c, X86_FEATURE_LONGRUN))
+ if (!x86_match_cpu(longrun_ids))
return -ENODEV;
-
return cpufreq_register_driver(&longrun_driver);
}
diff --git a/drivers/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c
index 6be3e07..827629c9 100644
--- a/drivers/cpufreq/p4-clockmod.c
+++ b/drivers/cpufreq/p4-clockmod.c
@@ -31,6 +31,7 @@
#include <asm/processor.h>
#include <asm/msr.h>
#include <asm/timer.h>
+#include <asm/cpu_device_id.h>
#include "speedstep-lib.h"
@@ -289,21 +290,25 @@
.attr = p4clockmod_attr,
};
+static const struct x86_cpu_id cpufreq_p4_id[] = {
+ { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_ACC },
+ {}
+};
+
+/*
+ * Intentionally no MODULE_DEVICE_TABLE here: this driver should not
+ * be auto loaded. Please don't add one.
+ */
static int __init cpufreq_p4_init(void)
{
- struct cpuinfo_x86 *c = &cpu_data(0);
int ret;
/*
* THERM_CONTROL is architectural for IA32 now, so
* we can rely on the capability checks
*/
- if (c->x86_vendor != X86_VENDOR_INTEL)
- return -ENODEV;
-
- if (!test_cpu_cap(c, X86_FEATURE_ACPI) ||
- !test_cpu_cap(c, X86_FEATURE_ACC))
+ if (!x86_match_cpu(cpufreq_p4_id) || !boot_cpu_has(X86_FEATURE_ACPI))
return -ENODEV;
ret = cpufreq_register_driver(&p4clockmod_driver);
diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c
index b3379d6..54dd031 100644
--- a/drivers/cpufreq/powernow-k6.c
+++ b/drivers/cpufreq/powernow-k6.c
@@ -16,6 +16,7 @@
#include <linux/timex.h>
#include <linux/io.h>
+#include <asm/cpu_device_id.h>
#include <asm/msr.h>
#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long
@@ -210,6 +211,12 @@
.attr = powernow_k6_attr,
};
+static const struct x86_cpu_id powernow_k6_ids[] = {
+ { X86_VENDOR_AMD, 5, 12 },
+ { X86_VENDOR_AMD, 5, 13 },
+ {}
+};
+
/**
* powernow_k6_init - initializes the k6 PowerNow! CPUFreq driver
@@ -220,10 +227,7 @@
*/
static int __init powernow_k6_init(void)
{
- struct cpuinfo_x86 *c = &cpu_data(0);
-
- if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 5) ||
- ((c->x86_model != 12) && (c->x86_model != 13)))
+ if (!x86_match_cpu(powernow_k6_ids))
return -ENODEV;
if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {
diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c
index d71d9f3..501d167 100644
--- a/drivers/cpufreq/powernow-k7.c
+++ b/drivers/cpufreq/powernow-k7.c
@@ -28,6 +28,7 @@
#include <asm/timer.h> /* Needed for recalibrate_cpu_khz() */
#include <asm/msr.h>
#include <asm/system.h>
+#include <asm/cpu_device_id.h>
#ifdef CONFIG_X86_POWERNOW_K7_ACPI
#include <linux/acpi.h>
@@ -110,18 +111,19 @@
return delta < 5;
}
+static const struct x86_cpu_id powernow_k7_cpuids[] = {
+ { X86_VENDOR_AMD, 7, },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, powernow_k7_cpuids);
+
static int check_powernow(void)
{
struct cpuinfo_x86 *c = &cpu_data(0);
unsigned int maxei, eax, ebx, ecx, edx;
- if ((c->x86_vendor != X86_VENDOR_AMD) || (c->x86 != 6)) {
-#ifdef MODULE
- printk(KERN_INFO PFX "This module only works with "
- "AMD K7 CPUs\n");
-#endif
+ if (!x86_match_cpu(powernow_k7_cpuids))
return 0;
- }
/* Get maximum capabilities */
maxei = cpuid_eax(0x80000000);
diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
index 8f9b2cee..c0e8164 100644
--- a/drivers/cpufreq/powernow-k8.c
+++ b/drivers/cpufreq/powernow-k8.c
@@ -40,6 +40,7 @@
#include <linux/delay.h>
#include <asm/msr.h>
+#include <asm/cpu_device_id.h>
#include <linux/acpi.h>
#include <linux/mutex.h>
@@ -520,6 +521,15 @@
return 0;
}
+static const struct x86_cpu_id powernow_k8_ids[] = {
+ /* IO based frequency switching */
+ { X86_VENDOR_AMD, 0xf },
+ /* MSR based frequency switching supported */
+ X86_FEATURE_MATCH(X86_FEATURE_HW_PSTATE),
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, powernow_k8_ids);
+
static void check_supported_cpu(void *_rc)
{
u32 eax, ebx, ecx, edx;
@@ -527,13 +537,7 @@
*rc = -ENODEV;
- if (__this_cpu_read(cpu_info.x86_vendor) != X86_VENDOR_AMD)
- return;
-
eax = cpuid_eax(CPUID_PROCESSOR_SIGNATURE);
- if (((eax & CPUID_XFAM) != CPUID_XFAM_K8) &&
- ((eax & CPUID_XFAM) < CPUID_XFAM_10H))
- return;
if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) {
if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
@@ -1553,6 +1557,9 @@
unsigned int i, supported_cpus = 0, cpu;
int rv;
+ if (!x86_match_cpu(powernow_k8_ids))
+ return -ENODEV;
+
for_each_online_cpu(i) {
int rc;
smp_call_function_single(i, check_supported_cpu, &rc, 1);
diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c
index 1e205e6..e42e073 100644
--- a/drivers/cpufreq/sc520_freq.c
+++ b/drivers/cpufreq/sc520_freq.c
@@ -22,6 +22,7 @@
#include <linux/timex.h>
#include <linux/io.h>
+#include <asm/cpu_device_id.h>
#include <asm/msr.h>
#define MMCR_BASE 0xfffef000 /* The default base address */
@@ -150,18 +151,19 @@
.attr = sc520_freq_attr,
};
+static const struct x86_cpu_id sc520_ids[] = {
+ { X86_VENDOR_AMD, 4, 9 },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, sc520_ids);
static int __init sc520_freq_init(void)
{
- struct cpuinfo_x86 *c = &cpu_data(0);
int err;
- /* Test if we have the right hardware */
- if (c->x86_vendor != X86_VENDOR_AMD ||
- c->x86 != 4 || c->x86_model != 9) {
- pr_debug("no Elan SC520 processor found!\n");
+ if (!x86_match_cpu(sc520_ids))
return -ENODEV;
- }
+
cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
if (!cpuctl) {
printk(KERN_ERR "sc520_freq: error: failed to remap memory\n");
diff --git a/drivers/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c
index 6ea3455..3a953d5 100644
--- a/drivers/cpufreq/speedstep-centrino.c
+++ b/drivers/cpufreq/speedstep-centrino.c
@@ -25,6 +25,7 @@
#include <asm/msr.h>
#include <asm/processor.h>
#include <asm/cpufeature.h>
+#include <asm/cpu_device_id.h>
#define PFX "speedstep-centrino: "
#define MAINTAINER "cpufreq@vger.kernel.org"
@@ -595,6 +596,24 @@
.owner = THIS_MODULE,
};
+/*
+ * This doesn't replace the detailed checks above because
+ * the generic CPU IDs don't have a way to match for steppings
+ * or ASCII model IDs.
+ */
+static const struct x86_cpu_id centrino_ids[] = {
+ { X86_VENDOR_INTEL, 6, 9, X86_FEATURE_EST },
+ { X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST },
+ { X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST },
+ { X86_VENDOR_INTEL, 6, 13, X86_FEATURE_EST },
+ { X86_VENDOR_INTEL, 15, 3, X86_FEATURE_EST },
+ { X86_VENDOR_INTEL, 15, 4, X86_FEATURE_EST },
+ {}
+};
+#if 0
+/* Autoload or not? Do not for now. */
+MODULE_DEVICE_TABLE(x86cpu, centrino_ids);
+#endif
/**
* centrino_init - initializes the Enhanced SpeedStep CPUFreq driver
@@ -612,11 +631,8 @@
*/
static int __init centrino_init(void)
{
- struct cpuinfo_x86 *cpu = &cpu_data(0);
-
- if (!cpu_has(cpu, X86_FEATURE_EST))
+ if (!x86_match_cpu(centrino_ids))
return -ENODEV;
-
return cpufreq_register_driver(¢rino_driver);
}
diff --git a/drivers/cpufreq/speedstep-ich.c b/drivers/cpufreq/speedstep-ich.c
index a748ce7..7432b3a 100644
--- a/drivers/cpufreq/speedstep-ich.c
+++ b/drivers/cpufreq/speedstep-ich.c
@@ -25,6 +25,8 @@
#include <linux/pci.h>
#include <linux/sched.h>
+#include <asm/cpu_device_id.h>
+
#include "speedstep-lib.h"
@@ -388,6 +390,16 @@
.attr = speedstep_attr,
};
+static const struct x86_cpu_id ss_smi_ids[] = {
+ { X86_VENDOR_INTEL, 6, 0xb, },
+ { X86_VENDOR_INTEL, 6, 0x8, },
+ { X86_VENDOR_INTEL, 15, 2 },
+ {}
+};
+#if 0
+/* Autoload or not? Do not for now. */
+MODULE_DEVICE_TABLE(x86cpu, ss_smi_ids);
+#endif
/**
* speedstep_init - initializes the SpeedStep CPUFreq driver
@@ -398,6 +410,9 @@
*/
static int __init speedstep_init(void)
{
+ if (!x86_match_cpu(ss_smi_ids))
+ return -ENODEV;
+
/* detect processor */
speedstep_processor = speedstep_detect_processor();
if (!speedstep_processor) {
diff --git a/drivers/cpufreq/speedstep-lib.c b/drivers/cpufreq/speedstep-lib.c
index 8af2d2f..7047821 100644
--- a/drivers/cpufreq/speedstep-lib.c
+++ b/drivers/cpufreq/speedstep-lib.c
@@ -249,6 +249,7 @@
* DETECT SPEEDSTEP-CAPABLE PROCESSOR *
*********************************************************************/
+/* Keep in sync with the x86_cpu_id tables in the different modules */
unsigned int speedstep_detect_processor(void)
{
struct cpuinfo_x86 *c = &cpu_data(0);
diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c
index c76ead3..6a457fc 100644
--- a/drivers/cpufreq/speedstep-smi.c
+++ b/drivers/cpufreq/speedstep-smi.c
@@ -20,6 +20,7 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <asm/ist.h>
+#include <asm/cpu_device_id.h>
#include "speedstep-lib.h"
@@ -379,6 +380,17 @@
.attr = speedstep_attr,
};
+static const struct x86_cpu_id ss_smi_ids[] = {
+ { X86_VENDOR_INTEL, 6, 0xb, },
+ { X86_VENDOR_INTEL, 6, 0x8, },
+ { X86_VENDOR_INTEL, 15, 2 },
+ {}
+};
+#if 0
+/* Not auto loaded currently */
+MODULE_DEVICE_TABLE(x86cpu, ss_smi_ids);
+#endif
+
/**
* speedstep_init - initializes the SpeedStep CPUFreq driver
*
@@ -388,6 +400,9 @@
*/
static int __init speedstep_init(void)
{
+ if (!x86_match_cpu(ss_smi_ids))
+ return -ENODEV;
+
speedstep_processor = speedstep_detect_processor();
switch (speedstep_processor) {
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 29b9469..37b2e94 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -19,6 +19,7 @@
#include <linux/percpu.h>
#include <linux/smp.h>
#include <linux/slab.h>
+#include <asm/cpu_device_id.h>
#include <asm/byteorder.h>
#include <asm/processor.h>
#include <asm/i387.h>
@@ -503,12 +504,18 @@
}
};
+static struct x86_cpu_id padlock_cpu_id[] = {
+ X86_FEATURE_MATCH(X86_FEATURE_XCRYPT),
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, padlock_cpu_id);
+
static int __init padlock_init(void)
{
int ret;
struct cpuinfo_x86 *c = &cpu_data(0);
- if (!cpu_has_xcrypt)
+ if (!x86_match_cpu(padlock_cpu_id))
return -ENODEV;
if (!cpu_has_xcrypt_enabled) {
diff --git a/drivers/crypto/padlock-sha.c b/drivers/crypto/padlock-sha.c
index 06bdb4b..9266c0e 100644
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
@@ -22,6 +22,7 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/scatterlist.h>
+#include <asm/cpu_device_id.h>
#include <asm/i387.h>
struct padlock_sha_desc {
@@ -526,6 +527,12 @@
}
};
+static struct x86_cpu_id padlock_sha_ids[] = {
+ X86_FEATURE_MATCH(X86_FEATURE_PHE),
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, padlock_sha_ids);
+
static int __init padlock_init(void)
{
int rc = -ENODEV;
@@ -533,15 +540,8 @@
struct shash_alg *sha1;
struct shash_alg *sha256;
- if (!cpu_has_phe) {
- printk(KERN_NOTICE PFX "VIA PadLock Hash Engine not detected.\n");
+ if (!x86_match_cpu(padlock_sha_ids) || !cpu_has_phe_enabled)
return -ENODEV;
- }
-
- if (!cpu_has_phe_enabled) {
- printk(KERN_NOTICE PFX "VIA PadLock detected, but not enabled. Hmm, strange...\n");
- return -ENODEV;
- }
/* Register the newly added algorithm module if on *
* VIA Nano processor, or else just do as before */
diff --git a/drivers/devfreq/exynos4_bus.c b/drivers/devfreq/exynos4_bus.c
index 6460577..cfaa98a 100644
--- a/drivers/devfreq/exynos4_bus.c
+++ b/drivers/devfreq/exynos4_bus.c
@@ -311,51 +311,51 @@
/* Change Divider - DMC0 */
tmp = data->dmc_divtable[index];
- __raw_writel(tmp, S5P_CLKDIV_DMC0);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
} while (tmp & 0x11111111);
/* Change Divider - TOP */
tmp = data->top_divtable[index];
- __raw_writel(tmp, S5P_CLKDIV_TOP);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_TOP);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
} while (tmp & 0x11111);
/* Change Divider - LEFTBUS */
- tmp = __raw_readl(S5P_CLKDIV_LEFTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
- tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
- S5P_CLKDIV_BUS_GDLR_SHIFT) |
+ EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
(exynos4210_clkdiv_lr_bus[index][1] <<
- S5P_CLKDIV_BUS_GPLR_SHIFT));
+ EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_LEFTBUS);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
} while (tmp & 0x11);
/* Change Divider - RIGHTBUS */
- tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
- tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
- S5P_CLKDIV_BUS_GDLR_SHIFT) |
+ EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
(exynos4210_clkdiv_lr_bus[index][1] <<
- S5P_CLKDIV_BUS_GPLR_SHIFT));
+ EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_RIGHTBUS);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
} while (tmp & 0x11);
return 0;
@@ -376,137 +376,137 @@
/* Change Divider - DMC0 */
tmp = data->dmc_divtable[index];
- __raw_writel(tmp, S5P_CLKDIV_DMC0);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
} while (tmp & 0x11111111);
/* Change Divider - DMC1 */
- tmp = __raw_readl(S5P_CLKDIV_DMC1);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_DMC1);
- tmp &= ~(S5P_CLKDIV_DMC1_G2D_ACP_MASK |
- S5P_CLKDIV_DMC1_C2C_MASK |
- S5P_CLKDIV_DMC1_C2CACLK_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK |
+ EXYNOS4_CLKDIV_DMC1_C2C_MASK |
+ EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK);
tmp |= ((exynos4x12_clkdiv_dmc1[index][0] <<
- S5P_CLKDIV_DMC1_G2D_ACP_SHIFT) |
+ EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) |
(exynos4x12_clkdiv_dmc1[index][1] <<
- S5P_CLKDIV_DMC1_C2C_SHIFT) |
+ EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) |
(exynos4x12_clkdiv_dmc1[index][2] <<
- S5P_CLKDIV_DMC1_C2CACLK_SHIFT));
+ EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_DMC1);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_DMC1);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_DMC1);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC1);
} while (tmp & 0x111111);
/* Change Divider - TOP */
- tmp = __raw_readl(S5P_CLKDIV_TOP);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
- tmp &= ~(S5P_CLKDIV_TOP_ACLK266_GPS_MASK |
- S5P_CLKDIV_TOP_ACLK100_MASK |
- S5P_CLKDIV_TOP_ACLK160_MASK |
- S5P_CLKDIV_TOP_ACLK133_MASK |
- S5P_CLKDIV_TOP_ONENAND_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
+ EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
tmp |= ((exynos4x12_clkdiv_top[index][0] <<
- S5P_CLKDIV_TOP_ACLK266_GPS_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) |
(exynos4x12_clkdiv_top[index][1] <<
- S5P_CLKDIV_TOP_ACLK100_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
(exynos4x12_clkdiv_top[index][2] <<
- S5P_CLKDIV_TOP_ACLK160_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
(exynos4x12_clkdiv_top[index][3] <<
- S5P_CLKDIV_TOP_ACLK133_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
(exynos4x12_clkdiv_top[index][4] <<
- S5P_CLKDIV_TOP_ONENAND_SHIFT));
+ EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_TOP);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_TOP);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
} while (tmp & 0x11111);
/* Change Divider - LEFTBUS */
- tmp = __raw_readl(S5P_CLKDIV_LEFTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
- tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
- S5P_CLKDIV_BUS_GDLR_SHIFT) |
+ EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
(exynos4x12_clkdiv_lr_bus[index][1] <<
- S5P_CLKDIV_BUS_GPLR_SHIFT));
+ EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_LEFTBUS);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
} while (tmp & 0x11);
/* Change Divider - RIGHTBUS */
- tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
- tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
- S5P_CLKDIV_BUS_GDLR_SHIFT) |
+ EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
(exynos4x12_clkdiv_lr_bus[index][1] <<
- S5P_CLKDIV_BUS_GPLR_SHIFT));
+ EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_RIGHTBUS);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
} while (tmp & 0x11);
/* Change Divider - MFC */
- tmp = __raw_readl(S5P_CLKDIV_MFC);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_MFC);
- tmp &= ~(S5P_CLKDIV_MFC_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_MFC_MASK);
tmp |= ((exynos4x12_clkdiv_sclkip[index][0] <<
- S5P_CLKDIV_MFC_SHIFT));
+ EXYNOS4_CLKDIV_MFC_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_MFC);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_MFC);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_MFC);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_MFC);
} while (tmp & 0x1);
/* Change Divider - JPEG */
- tmp = __raw_readl(S5P_CLKDIV_CAM1);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_CAM1);
- tmp &= ~(S5P_CLKDIV_CAM1_JPEG_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_CAM1_JPEG_MASK);
tmp |= ((exynos4x12_clkdiv_sclkip[index][1] <<
- S5P_CLKDIV_CAM1_JPEG_SHIFT));
+ EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_CAM1);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_CAM1);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_CAM1);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
} while (tmp & 0x1);
/* Change Divider - FIMC0~3 */
- tmp = __raw_readl(S5P_CLKDIV_CAM);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_CAM);
- tmp &= ~(S5P_CLKDIV_CAM_FIMC0_MASK | S5P_CLKDIV_CAM_FIMC1_MASK |
- S5P_CLKDIV_CAM_FIMC2_MASK | S5P_CLKDIV_CAM_FIMC3_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_CAM_FIMC0_MASK | EXYNOS4_CLKDIV_CAM_FIMC1_MASK |
+ EXYNOS4_CLKDIV_CAM_FIMC2_MASK | EXYNOS4_CLKDIV_CAM_FIMC3_MASK);
tmp |= ((exynos4x12_clkdiv_sclkip[index][2] <<
- S5P_CLKDIV_CAM_FIMC0_SHIFT) |
+ EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) |
(exynos4x12_clkdiv_sclkip[index][2] <<
- S5P_CLKDIV_CAM_FIMC1_SHIFT) |
+ EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) |
(exynos4x12_clkdiv_sclkip[index][2] <<
- S5P_CLKDIV_CAM_FIMC2_SHIFT) |
+ EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) |
(exynos4x12_clkdiv_sclkip[index][2] <<
- S5P_CLKDIV_CAM_FIMC3_SHIFT));
+ EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT));
- __raw_writel(tmp, S5P_CLKDIV_CAM);
+ __raw_writel(tmp, EXYNOS4_CLKDIV_CAM);
do {
- tmp = __raw_readl(S5P_CLKDIV_STAT_CAM1);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
} while (tmp & 0x1111);
return 0;
@@ -760,55 +760,55 @@
int mgrp;
int i, err = 0;
- tmp = __raw_readl(S5P_CLKDIV_DMC0);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
for (i = LV_0; i < EX4210_LV_NUM; i++) {
- tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK |
- S5P_CLKDIV_DMC0_ACPPCLK_MASK |
- S5P_CLKDIV_DMC0_DPHY_MASK |
- S5P_CLKDIV_DMC0_DMC_MASK |
- S5P_CLKDIV_DMC0_DMCD_MASK |
- S5P_CLKDIV_DMC0_DMCP_MASK |
- S5P_CLKDIV_DMC0_COPY2_MASK |
- S5P_CLKDIV_DMC0_CORETI_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
+ EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
+ EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMC_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMCP_MASK |
+ EXYNOS4_CLKDIV_DMC0_COPY2_MASK |
+ EXYNOS4_CLKDIV_DMC0_CORETI_MASK);
tmp |= ((exynos4210_clkdiv_dmc0[i][0] <<
- S5P_CLKDIV_DMC0_ACP_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
(exynos4210_clkdiv_dmc0[i][1] <<
- S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
(exynos4210_clkdiv_dmc0[i][2] <<
- S5P_CLKDIV_DMC0_DPHY_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
(exynos4210_clkdiv_dmc0[i][3] <<
- S5P_CLKDIV_DMC0_DMC_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
(exynos4210_clkdiv_dmc0[i][4] <<
- S5P_CLKDIV_DMC0_DMCD_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
(exynos4210_clkdiv_dmc0[i][5] <<
- S5P_CLKDIV_DMC0_DMCP_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) |
(exynos4210_clkdiv_dmc0[i][6] <<
- S5P_CLKDIV_DMC0_COPY2_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) |
(exynos4210_clkdiv_dmc0[i][7] <<
- S5P_CLKDIV_DMC0_CORETI_SHIFT));
+ EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT));
data->dmc_divtable[i] = tmp;
}
- tmp = __raw_readl(S5P_CLKDIV_TOP);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
for (i = LV_0; i < EX4210_LV_NUM; i++) {
- tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK |
- S5P_CLKDIV_TOP_ACLK100_MASK |
- S5P_CLKDIV_TOP_ACLK160_MASK |
- S5P_CLKDIV_TOP_ACLK133_MASK |
- S5P_CLKDIV_TOP_ONENAND_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK200_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
+ EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
+ EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
tmp |= ((exynos4210_clkdiv_top[i][0] <<
- S5P_CLKDIV_TOP_ACLK200_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) |
(exynos4210_clkdiv_top[i][1] <<
- S5P_CLKDIV_TOP_ACLK100_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
(exynos4210_clkdiv_top[i][2] <<
- S5P_CLKDIV_TOP_ACLK160_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
(exynos4210_clkdiv_top[i][3] <<
- S5P_CLKDIV_TOP_ACLK133_SHIFT) |
+ EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
(exynos4210_clkdiv_top[i][4] <<
- S5P_CLKDIV_TOP_ONENAND_SHIFT));
+ EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
data->top_divtable[i] = tmp;
}
@@ -868,32 +868,32 @@
int ret;
/* Enable pause function for DREX2 DVFS */
- tmp = __raw_readl(S5P_DMC_PAUSE_CTRL);
- tmp |= DMC_PAUSE_ENABLE;
- __raw_writel(tmp, S5P_DMC_PAUSE_CTRL);
+ tmp = __raw_readl(EXYNOS4_DMC_PAUSE_CTRL);
+ tmp |= EXYNOS4_DMC_PAUSE_ENABLE;
+ __raw_writel(tmp, EXYNOS4_DMC_PAUSE_CTRL);
- tmp = __raw_readl(S5P_CLKDIV_DMC0);
+ tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
for (i = 0; i < EX4x12_LV_NUM; i++) {
- tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK |
- S5P_CLKDIV_DMC0_ACPPCLK_MASK |
- S5P_CLKDIV_DMC0_DPHY_MASK |
- S5P_CLKDIV_DMC0_DMC_MASK |
- S5P_CLKDIV_DMC0_DMCD_MASK |
- S5P_CLKDIV_DMC0_DMCP_MASK);
+ tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
+ EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
+ EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMC_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
+ EXYNOS4_CLKDIV_DMC0_DMCP_MASK);
tmp |= ((exynos4x12_clkdiv_dmc0[i][0] <<
- S5P_CLKDIV_DMC0_ACP_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
(exynos4x12_clkdiv_dmc0[i][1] <<
- S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
(exynos4x12_clkdiv_dmc0[i][2] <<
- S5P_CLKDIV_DMC0_DPHY_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
(exynos4x12_clkdiv_dmc0[i][3] <<
- S5P_CLKDIV_DMC0_DMC_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
(exynos4x12_clkdiv_dmc0[i][4] <<
- S5P_CLKDIV_DMC0_DMCD_SHIFT) |
+ EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
(exynos4x12_clkdiv_dmc0[i][5] <<
- S5P_CLKDIV_DMC0_DMCP_SHIFT));
+ EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT));
data->dmc_divtable[i] = tmp;
}
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index bdc2937..6f17671 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -25,6 +25,7 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/module.h>
+#include <linux/irqdomain.h>
#include <asm/mach/irq.h>
@@ -74,9 +75,10 @@
#endif
};
-
+static struct irq_domain *irq_domain;
static void __iomem *regs;
-static struct tegra_gpio_bank tegra_gpio_banks[7];
+static u32 tegra_gpio_bank_count;
+static struct tegra_gpio_bank *tegra_gpio_banks;
static inline void tegra_gpio_writel(u32 val, u32 reg)
{
@@ -139,7 +141,7 @@
static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
{
- return TEGRA_GPIO_TO_IRQ(offset);
+ return irq_find_mapping(irq_domain, offset);
}
static struct gpio_chip tegra_gpio_chip = {
@@ -155,28 +157,28 @@
static void tegra_gpio_irq_ack(struct irq_data *d)
{
- int gpio = d->irq - INT_GPIO_BASE;
+ int gpio = d->hwirq;
tegra_gpio_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio));
}
static void tegra_gpio_irq_mask(struct irq_data *d)
{
- int gpio = d->irq - INT_GPIO_BASE;
+ int gpio = d->hwirq;
tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 0);
}
static void tegra_gpio_irq_unmask(struct irq_data *d)
{
- int gpio = d->irq - INT_GPIO_BASE;
+ int gpio = d->hwirq;
tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 1);
}
static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type)
{
- int gpio = d->irq - INT_GPIO_BASE;
+ int gpio = d->hwirq;
struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d);
int port = GPIO_PORT(gpio);
int lvl_type;
@@ -273,7 +275,7 @@
local_irq_save(flags);
- for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
+ for (b = 0; b < tegra_gpio_bank_count; b++) {
struct tegra_gpio_bank *bank = &tegra_gpio_banks[b];
for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
@@ -296,7 +298,7 @@
int p;
local_irq_save(flags);
- for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) {
+ for (b = 0; b < tegra_gpio_bank_count; b++) {
struct tegra_gpio_bank *bank = &tegra_gpio_banks[b];
for (p = 0; p < ARRAY_SIZE(bank->oe); p++) {
@@ -337,13 +339,44 @@
static int __devinit tegra_gpio_probe(struct platform_device *pdev)
{
+ int irq_base;
struct resource *res;
struct tegra_gpio_bank *bank;
int gpio;
int i;
int j;
- for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
+ for (;;) {
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, tegra_gpio_bank_count);
+ if (!res)
+ break;
+ tegra_gpio_bank_count++;
+ }
+ if (!tegra_gpio_bank_count) {
+ dev_err(&pdev->dev, "Missing IRQ resource\n");
+ return -ENODEV;
+ }
+
+ tegra_gpio_chip.ngpio = tegra_gpio_bank_count * 32;
+
+ tegra_gpio_banks = devm_kzalloc(&pdev->dev,
+ tegra_gpio_bank_count * sizeof(*tegra_gpio_banks),
+ GFP_KERNEL);
+ if (!tegra_gpio_banks) {
+ dev_err(&pdev->dev, "Couldn't allocate bank structure\n");
+ return -ENODEV;
+ }
+
+ irq_base = irq_alloc_descs(-1, 0, tegra_gpio_chip.ngpio, 0);
+ if (irq_base < 0) {
+ dev_err(&pdev->dev, "Couldn't allocate IRQ numbers\n");
+ return -ENODEV;
+ }
+ irq_domain = irq_domain_add_legacy(pdev->dev.of_node,
+ tegra_gpio_chip.ngpio, irq_base, 0,
+ &irq_domain_simple_ops, NULL);
+
+ for (i = 0; i < tegra_gpio_bank_count; i++) {
res = platform_get_resource(pdev, IORESOURCE_IRQ, i);
if (!res) {
dev_err(&pdev->dev, "Missing IRQ resource\n");
@@ -380,8 +413,8 @@
gpiochip_add(&tegra_gpio_chip);
- for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
- int irq = TEGRA_GPIO_TO_IRQ(gpio);
+ for (gpio = 0; gpio < tegra_gpio_chip.ngpio; gpio++) {
+ int irq = irq_find_mapping(irq_domain, gpio);
/* No validity check; all Tegra GPIOs are valid IRQs */
bank = &tegra_gpio_banks[GPIO_BANK(gpio)];
@@ -393,7 +426,7 @@
set_irq_flags(irq, IRQF_VALID);
}
- for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
+ for (i = 0; i < tegra_gpio_bank_count; i++) {
bank = &tegra_gpio_banks[i];
irq_set_chained_handler(bank->irq, tegra_gpio_irq_handler);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index af08ce7..bce53fa 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1619,11 +1619,7 @@
list_add_tail(&dynid->list, &hdrv->dyn_list);
spin_unlock(&hdrv->dyn_lock);
- ret = 0;
- if (get_driver(&hdrv->driver)) {
- ret = driver_attach(&hdrv->driver);
- put_driver(&hdrv->driver);
- }
+ ret = driver_attach(&hdrv->driver);
return ret ? : count;
}
diff --git a/drivers/hv/channel_mgmt.c b/drivers/hv/channel_mgmt.c
index 36484db..9ffbfc5 100644
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -37,81 +37,6 @@
void (*message_handler)(struct vmbus_channel_message_header *msg);
};
-#define MAX_MSG_TYPES 4
-#define MAX_NUM_DEVICE_CLASSES_SUPPORTED 8
-
-static const uuid_le
- supported_device_classes[MAX_NUM_DEVICE_CLASSES_SUPPORTED] = {
- /* {ba6163d9-04a1-4d29-b605-72e2ffb1dc7f} */
- /* Storage - SCSI */
- {
- .b = {
- 0xd9, 0x63, 0x61, 0xba, 0xa1, 0x04, 0x29, 0x4d,
- 0xb6, 0x05, 0x72, 0xe2, 0xff, 0xb1, 0xdc, 0x7f
- }
- },
-
- /* {F8615163-DF3E-46c5-913F-F2D2F965ED0E} */
- /* Network */
- {
- .b = {
- 0x63, 0x51, 0x61, 0xF8, 0x3E, 0xDF, 0xc5, 0x46,
- 0x91, 0x3F, 0xF2, 0xD2, 0xF9, 0x65, 0xED, 0x0E
- }
- },
-
- /* {CFA8B69E-5B4A-4cc0-B98B-8BA1A1F3F95A} */
- /* Input */
- {
- .b = {
- 0x9E, 0xB6, 0xA8, 0xCF, 0x4A, 0x5B, 0xc0, 0x4c,
- 0xB9, 0x8B, 0x8B, 0xA1, 0xA1, 0xF3, 0xF9, 0x5A
- }
- },
-
- /* {32412632-86cb-44a2-9b5c-50d1417354f5} */
- /* IDE */
- {
- .b = {
- 0x32, 0x26, 0x41, 0x32, 0xcb, 0x86, 0xa2, 0x44,
- 0x9b, 0x5c, 0x50, 0xd1, 0x41, 0x73, 0x54, 0xf5
- }
- },
- /* 0E0B6031-5213-4934-818B-38D90CED39DB */
- /* Shutdown */
- {
- .b = {
- 0x31, 0x60, 0x0B, 0X0E, 0x13, 0x52, 0x34, 0x49,
- 0x81, 0x8B, 0x38, 0XD9, 0x0C, 0xED, 0x39, 0xDB
- }
- },
- /* {9527E630-D0AE-497b-ADCE-E80AB0175CAF} */
- /* TimeSync */
- {
- .b = {
- 0x30, 0xe6, 0x27, 0x95, 0xae, 0xd0, 0x7b, 0x49,
- 0xad, 0xce, 0xe8, 0x0a, 0xb0, 0x17, 0x5c, 0xaf
- }
- },
- /* {57164f39-9115-4e78-ab55-382f3bd5422d} */
- /* Heartbeat */
- {
- .b = {
- 0x39, 0x4f, 0x16, 0x57, 0x15, 0x91, 0x78, 0x4e,
- 0xab, 0x55, 0x38, 0x2f, 0x3b, 0xd5, 0x42, 0x2d
- }
- },
- /* {A9A0F4E7-5A45-4d96-B827-8A841E8C03E6} */
- /* KVP */
- {
- .b = {
- 0xe7, 0xf4, 0xa0, 0xa9, 0x45, 0x5a, 0x96, 0x4d,
- 0xb8, 0x27, 0x8a, 0x84, 0x1e, 0x8c, 0x3, 0xe6
- }
- },
-
-};
-
/**
* vmbus_prep_negotiate_resp() - Create default response for Hyper-V Negotiate message
@@ -321,20 +246,8 @@
struct vmbus_channel *newchannel;
uuid_le *guidtype;
uuid_le *guidinstance;
- int i;
- int fsupported = 0;
offer = (struct vmbus_channel_offer_channel *)hdr;
- for (i = 0; i < MAX_NUM_DEVICE_CLASSES_SUPPORTED; i++) {
- if (!uuid_le_cmp(offer->offer.if_type,
- supported_device_classes[i])) {
- fsupported = 1;
- break;
- }
- }
-
- if (!fsupported)
- return;
guidtype = &offer->offer.if_type;
guidinstance = &offer->offer.if_instance;
diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c
index 12aa97f..15956bd 100644
--- a/drivers/hv/hv.c
+++ b/drivers/hv/hv.c
@@ -155,9 +155,9 @@
union hv_x64_msr_hypercall_contents hypercall_msr;
void *virtaddr = NULL;
- memset(hv_context.synic_event_page, 0, sizeof(void *) * MAX_NUM_CPUS);
+ memset(hv_context.synic_event_page, 0, sizeof(void *) * NR_CPUS);
memset(hv_context.synic_message_page, 0,
- sizeof(void *) * MAX_NUM_CPUS);
+ sizeof(void *) * NR_CPUS);
if (!query_hypervisor_presence())
goto cleanup;
diff --git a/drivers/hv/hv_kvp.c b/drivers/hv/hv_kvp.c
index 0e8343f..0ef4c1f 100644
--- a/drivers/hv/hv_kvp.c
+++ b/drivers/hv/hv_kvp.c
@@ -28,8 +28,6 @@
#include <linux/workqueue.h>
#include <linux/hyperv.h>
-#include "hv_kvp.h"
-
/*
@@ -73,15 +71,20 @@
{
struct cn_msg *msg;
+ struct hv_kvp_msg *kvp_msg;
+ char *version;
- msg = kzalloc(sizeof(*msg) + strlen(HV_DRV_VERSION) + 1 , GFP_ATOMIC);
+ msg = kzalloc(sizeof(*msg) + sizeof(struct hv_kvp_msg), GFP_ATOMIC);
if (msg) {
+ kvp_msg = (struct hv_kvp_msg *)msg->data;
+ version = kvp_msg->body.kvp_version;
msg->id.idx = CN_KVP_IDX;
msg->id.val = CN_KVP_VAL;
- msg->seq = KVP_REGISTER;
- strcpy(msg->data, HV_DRV_VERSION);
- msg->len = strlen(HV_DRV_VERSION) + 1;
+
+ kvp_msg->kvp_hdr.operation = KVP_OP_REGISTER;
+ strcpy(version, HV_DRV_VERSION);
+ msg->len = sizeof(struct hv_kvp_msg);
cn_netlink_send(msg, 0, GFP_ATOMIC);
kfree(msg);
}
@@ -103,23 +106,24 @@
static void
kvp_cn_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
{
- struct hv_ku_msg *message;
+ struct hv_kvp_msg *message;
+ struct hv_kvp_msg_enumerate *data;
- message = (struct hv_ku_msg *)msg->data;
- if (msg->seq == KVP_REGISTER) {
+ message = (struct hv_kvp_msg *)msg->data;
+ if (message->kvp_hdr.operation == KVP_OP_REGISTER) {
pr_info("KVP: user-mode registering done.\n");
kvp_register();
}
- if (msg->seq == KVP_USER_SET) {
+ if (message->kvp_hdr.operation == KVP_OP_ENUMERATE) {
+ data = &message->body.kvp_enum_data;
/*
* Complete the transaction by forwarding the key value
* to the host. But first, cancel the timeout.
*/
if (cancel_delayed_work_sync(&kvp_work))
- kvp_respond_to_host(message->kvp_key,
- message->kvp_value,
- !strlen(message->kvp_key));
+ kvp_respond_to_host(data->data.key, data->data.value,
+ !strlen(data->data.key));
}
}
@@ -127,6 +131,7 @@
kvp_send_key(struct work_struct *dummy)
{
struct cn_msg *msg;
+ struct hv_kvp_msg *message;
int index = kvp_transaction.index;
msg = kzalloc(sizeof(*msg) + sizeof(struct hv_kvp_msg) , GFP_ATOMIC);
@@ -134,9 +139,11 @@
if (msg) {
msg->id.idx = CN_KVP_IDX;
msg->id.val = CN_KVP_VAL;
- msg->seq = KVP_KERNEL_GET;
- ((struct hv_ku_msg *)msg->data)->kvp_index = index;
- msg->len = sizeof(struct hv_ku_msg);
+
+ message = (struct hv_kvp_msg *)msg->data;
+ message->kvp_hdr.operation = KVP_OP_ENUMERATE;
+ message->body.kvp_enum_data.index = index;
+ msg->len = sizeof(struct hv_kvp_msg);
cn_netlink_send(msg, 0, GFP_ATOMIC);
kfree(msg);
}
@@ -193,7 +200,7 @@
kvp_msg = (struct hv_kvp_msg *)
&recv_buffer[sizeof(struct vmbuspipe_hdr) +
sizeof(struct icmsg_hdr)];
- kvp_data = &kvp_msg->kvp_data;
+ kvp_data = &kvp_msg->body.kvp_enum_data;
key_name = key;
/*
@@ -268,7 +275,7 @@
sizeof(struct vmbuspipe_hdr) +
sizeof(struct icmsg_hdr)];
- kvp_data = &kvp_msg->kvp_data;
+ kvp_data = &kvp_msg->body.kvp_enum_data;
/*
* We only support the "get" operation on
diff --git a/drivers/hv/hv_kvp.h b/drivers/hv/hv_kvp.h
deleted file mode 100644
index 9b765d7..0000000
--- a/drivers/hv/hv_kvp.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * An implementation of HyperV key value pair (KVP) functionality for Linux.
- *
- *
- * Copyright (C) 2010, Novell, Inc.
- * Author : K. Y. Srinivasan <ksrinivasan@novell.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
- * NON INFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-#ifndef _KVP_H
-#define _KVP_H_
-
-/*
- * Maximum value size - used for both key names and value data, and includes
- * any applicable NULL terminators.
- *
- * Note: This limit is somewhat arbitrary, but falls easily within what is
- * supported for all native guests (back to Win 2000) and what is reasonable
- * for the IC KVP exchange functionality. Note that Windows Me/98/95 are
- * limited to 255 character key names.
- *
- * MSDN recommends not storing data values larger than 2048 bytes in the
- * registry.
- *
- * Note: This value is used in defining the KVP exchange message - this value
- * cannot be modified without affecting the message size and compatibility.
- */
-
-/*
- * bytes, including any null terminators
- */
-#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE (2048)
-
-
-/*
- * Maximum key size - the registry limit for the length of an entry name
- * is 256 characters, including the null terminator
- */
-
-#define HV_KVP_EXCHANGE_MAX_KEY_SIZE (512)
-
-/*
- * In Linux, we implement the KVP functionality in two components:
- * 1) The kernel component which is packaged as part of the hv_utils driver
- * is responsible for communicating with the host and responsible for
- * implementing the host/guest protocol. 2) A user level daemon that is
- * responsible for data gathering.
- *
- * Host/Guest Protocol: The host iterates over an index and expects the guest
- * to assign a key name to the index and also return the value corresponding to
- * the key. The host will have atmost one KVP transaction outstanding at any
- * given point in time. The host side iteration stops when the guest returns
- * an error. Microsoft has specified the following mapping of key names to
- * host specified index:
- *
- * Index Key Name
- * 0 FullyQualifiedDomainName
- * 1 IntegrationServicesVersion
- * 2 NetworkAddressIPv4
- * 3 NetworkAddressIPv6
- * 4 OSBuildNumber
- * 5 OSName
- * 6 OSMajorVersion
- * 7 OSMinorVersion
- * 8 OSVersion
- * 9 ProcessorArchitecture
- *
- * The Windows host expects the Key Name and Key Value to be encoded in utf16.
- *
- * Guest Kernel/KVP Daemon Protocol: As noted earlier, we implement all of the
- * data gathering functionality in a user mode daemon. The user level daemon
- * is also responsible for binding the key name to the index as well. The
- * kernel and user-level daemon communicate using a connector channel.
- *
- * The user mode component first registers with the
- * the kernel component. Subsequently, the kernel component requests, data
- * for the specified keys. In response to this message the user mode component
- * fills in the value corresponding to the specified key. We overload the
- * sequence field in the cn_msg header to define our KVP message types.
- *
- *
- * The kernel component simply acts as a conduit for communication between the
- * Windows host and the user-level daemon. The kernel component passes up the
- * index received from the Host to the user-level daemon. If the index is
- * valid (supported), the corresponding key as well as its
- * value (both are strings) is returned. If the index is invalid
- * (not supported), a NULL key string is returned.
- */
-
-/*
- *
- * The following definitions are shared with the user-mode component; do not
- * change any of this without making the corresponding changes in
- * the KVP user-mode component.
- */
-
-#define CN_KVP_VAL 0x1 /* This supports queries from the kernel */
-#define CN_KVP_USER_VAL 0x2 /* This supports queries from the user */
-
-enum hv_ku_op {
- KVP_REGISTER = 0, /* Register the user mode component */
- KVP_KERNEL_GET, /* Kernel is requesting the value */
- KVP_KERNEL_SET, /* Kernel is providing the value */
- KVP_USER_GET, /* User is requesting the value */
- KVP_USER_SET /* User is providing the value */
-};
-
-struct hv_ku_msg {
- __u32 kvp_index; /* Key index */
- __u8 kvp_key[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; /* Key name */
- __u8 kvp_value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE]; /* Key value */
-};
-
-
-
-
-#ifdef __KERNEL__
-
-/*
- * Registry value types.
- */
-
-#define REG_SZ 1
-
-enum hv_kvp_exchg_op {
- KVP_OP_GET = 0,
- KVP_OP_SET,
- KVP_OP_DELETE,
- KVP_OP_ENUMERATE,
- KVP_OP_COUNT /* Number of operations, must be last. */
-};
-
-enum hv_kvp_exchg_pool {
- KVP_POOL_EXTERNAL = 0,
- KVP_POOL_GUEST,
- KVP_POOL_AUTO,
- KVP_POOL_AUTO_EXTERNAL,
- KVP_POOL_AUTO_INTERNAL,
- KVP_POOL_COUNT /* Number of pools, must be last. */
-};
-
-struct hv_kvp_hdr {
- u8 operation;
- u8 pool;
-};
-
-struct hv_kvp_exchg_msg_value {
- u32 value_type;
- u32 key_size;
- u32 value_size;
- u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
- u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE];
-};
-
-struct hv_kvp_msg_enumerate {
- u32 index;
- struct hv_kvp_exchg_msg_value data;
-};
-
-struct hv_kvp_msg {
- struct hv_kvp_hdr kvp_hdr;
- struct hv_kvp_msg_enumerate kvp_data;
-};
-
-int hv_kvp_init(struct hv_util_service *);
-void hv_kvp_deinit(void);
-void hv_kvp_onchannelcallback(void *);
-
-#endif /* __KERNEL__ */
-#endif /* _KVP_H */
-
diff --git a/drivers/hv/hv_util.c b/drivers/hv/hv_util.c
index 55d58f2..dbb8b8e 100644
--- a/drivers/hv/hv_util.c
+++ b/drivers/hv/hv_util.c
@@ -28,9 +28,6 @@
#include <linux/reboot.h>
#include <linux/hyperv.h>
-#include "hv_kvp.h"
-
-
static void shutdown_onchannelcallback(void *context);
static struct hv_util_service util_shutdown = {
.util_cb = shutdown_onchannelcallback,
diff --git a/drivers/hv/hyperv_vmbus.h b/drivers/hv/hyperv_vmbus.h
index 6d7d286..699f0d8 100644
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@@ -457,7 +457,6 @@
},
};
-#define MAX_NUM_CPUS 32
struct hv_input_signal_event_buffer {
@@ -483,8 +482,8 @@
/* 8-bytes aligned of the buffer above */
struct hv_input_signal_event *signal_event_param;
- void *synic_message_page[MAX_NUM_CPUS];
- void *synic_event_page[MAX_NUM_CPUS];
+ void *synic_message_page[NR_CPUS];
+ void *synic_event_page[NR_CPUS];
};
extern struct hv_context hv_context;
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index a6c6ec3..249ac46 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -39,6 +39,7 @@
#include <linux/moduleparam.h>
#include <asm/msr.h>
#include <asm/processor.h>
+#include <asm/cpu_device_id.h>
#define DRVNAME "coretemp"
@@ -759,13 +760,23 @@
.notifier_call = coretemp_cpu_callback,
};
+static const struct x86_cpu_id coretemp_ids[] = {
+ { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, X86_FEATURE_DTS },
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, coretemp_ids);
+
static int __init coretemp_init(void)
{
int i, err = -ENODEV;
- /* quick check if we run Intel */
- if (cpu_data(0).x86_vendor != X86_VENDOR_INTEL)
- goto exit;
+ /*
+ * CPUID.06H.EAX[0] indicates whether the CPU has thermal
+ * sensors. We check this bit only, all the early CPUs
+ * without thermal sensors will be filtered out.
+ */
+ if (!x86_match_cpu(coretemp_ids))
+ return -ENODEV;
err = platform_driver_register(&coretemp_driver);
if (err)
diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c
index 8eac67d..8689664e 100644
--- a/drivers/hwmon/via-cputemp.c
+++ b/drivers/hwmon/via-cputemp.c
@@ -37,6 +37,7 @@
#include <linux/cpu.h>
#include <asm/msr.h>
#include <asm/processor.h>
+#include <asm/cpu_device_id.h>
#define DRVNAME "via_cputemp"
@@ -308,15 +309,20 @@
.notifier_call = via_cputemp_cpu_callback,
};
+static const struct x86_cpu_id cputemp_ids[] = {
+ { X86_VENDOR_CENTAUR, 6, 0xa, }, /* C7 A */
+ { X86_VENDOR_CENTAUR, 6, 0xd, }, /* C7 D */
+ { X86_VENDOR_CENTAUR, 6, 0xf, }, /* Nano */
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, cputemp_ids);
+
static int __init via_cputemp_init(void)
{
int i, err;
- if (cpu_data(0).x86_vendor != X86_VENDOR_CENTAUR) {
- printk(KERN_DEBUG DRVNAME ": Not a VIA CPU\n");
- err = -ENODEV;
- goto exit;
- }
+ if (!x86_match_cpu(cputemp_ids))
+ return -ENODEV;
err = platform_driver_register(&via_cputemp_driver);
if (err)
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 54ab97b..237fe57 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -62,6 +62,7 @@
#include <linux/notifier.h>
#include <linux/cpu.h>
#include <linux/module.h>
+#include <asm/cpu_device_id.h>
#include <asm/mwait.h>
#include <asm/msr.h>
@@ -81,6 +82,17 @@
/* Reliable LAPIC Timer States, bit 1 for C1 etc. */
static unsigned int lapic_timer_reliable_states = (1 << 1); /* Default to only C1 */
+struct idle_cpu {
+ struct cpuidle_state *state_table;
+
+ /*
+ * Hardware C-state auto-demotion may not always be optimal.
+ * Indicate which enable bits to clear here.
+ */
+ unsigned long auto_demotion_disable_flags;
+};
+
+static const struct idle_cpu *icpu;
static struct cpuidle_device __percpu *intel_idle_cpuidle_devices;
static int intel_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index);
@@ -88,12 +100,6 @@
static struct cpuidle_state *cpuidle_state_table;
/*
- * Hardware C-state auto-demotion may not always be optimal.
- * Indicate which enable bits to clear here.
- */
-static unsigned long long auto_demotion_disable_flags;
-
-/*
* Set this flag for states where the HW flushes the TLB for us
* and so we don't need cross-calls to keep it consistent.
* If this flag is set, SW flushes the TLB, so even if the
@@ -319,27 +325,72 @@
unsigned long long msr_bits;
rdmsrl(MSR_NHM_SNB_PKG_CST_CFG_CTL, msr_bits);
- msr_bits &= ~auto_demotion_disable_flags;
+ msr_bits &= ~(icpu->auto_demotion_disable_flags);
wrmsrl(MSR_NHM_SNB_PKG_CST_CFG_CTL, msr_bits);
}
+static const struct idle_cpu idle_cpu_nehalem = {
+ .state_table = nehalem_cstates,
+};
+
+static const struct idle_cpu idle_cpu_westmere = {
+ .state_table = nehalem_cstates,
+ .auto_demotion_disable_flags = NHM_C1_AUTO_DEMOTE | NHM_C3_AUTO_DEMOTE,
+};
+
+static const struct idle_cpu idle_cpu_atom = {
+ .state_table = atom_cstates,
+};
+
+static const struct idle_cpu idle_cpu_lincroft = {
+ .state_table = atom_cstates,
+ .auto_demotion_disable_flags = ATM_LNC_C6_AUTO_DEMOTE,
+};
+
+static const struct idle_cpu idle_cpu_snb = {
+ .state_table = snb_cstates,
+};
+
+#define ICPU(model, cpu) \
+ { X86_VENDOR_INTEL, 6, model, X86_FEATURE_MWAIT, (unsigned long)&cpu }
+
+static const struct x86_cpu_id intel_idle_ids[] = {
+ ICPU(0x1a, idle_cpu_nehalem),
+ ICPU(0x1e, idle_cpu_nehalem),
+ ICPU(0x1f, idle_cpu_nehalem),
+ ICPU(0x25, idle_cpu_westmere),
+ ICPU(0x2c, idle_cpu_westmere),
+ ICPU(0x2f, idle_cpu_westmere),
+ ICPU(0x1c, idle_cpu_atom),
+ ICPU(0x26, idle_cpu_lincroft),
+ ICPU(0x2f, idle_cpu_westmere),
+ ICPU(0x2a, idle_cpu_snb),
+ ICPU(0x2d, idle_cpu_snb),
+ {}
+};
+MODULE_DEVICE_TABLE(x86cpu, intel_idle_ids);
+
/*
* intel_idle_probe()
*/
static int intel_idle_probe(void)
{
unsigned int eax, ebx, ecx;
+ const struct x86_cpu_id *id;
if (max_cstate == 0) {
pr_debug(PREFIX "disabled\n");
return -EPERM;
}
- if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL)
+ id = x86_match_cpu(intel_idle_ids);
+ if (!id) {
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+ boot_cpu_data.x86 == 6)
+ pr_debug(PREFIX "does not run on family %d model %d\n",
+ boot_cpu_data.x86, boot_cpu_data.x86_model);
return -ENODEV;
-
- if (!boot_cpu_has(X86_FEATURE_MWAIT))
- return -ENODEV;
+ }
if (boot_cpu_data.cpuid_level < CPUID_MWAIT_LEAF)
return -ENODEV;
@@ -353,43 +404,8 @@
pr_debug(PREFIX "MWAIT substates: 0x%x\n", mwait_substates);
-
- if (boot_cpu_data.x86 != 6) /* family 6 */
- return -ENODEV;
-
- switch (boot_cpu_data.x86_model) {
-
- case 0x1A: /* Core i7, Xeon 5500 series */
- case 0x1E: /* Core i7 and i5 Processor - Lynnfield Jasper Forest */
- case 0x1F: /* Core i7 and i5 Processor - Nehalem */
- case 0x2E: /* Nehalem-EX Xeon */
- case 0x2F: /* Westmere-EX Xeon */
- case 0x25: /* Westmere */
- case 0x2C: /* Westmere */
- cpuidle_state_table = nehalem_cstates;
- auto_demotion_disable_flags =
- (NHM_C1_AUTO_DEMOTE | NHM_C3_AUTO_DEMOTE);
- break;
-
- case 0x1C: /* 28 - Atom Processor */
- cpuidle_state_table = atom_cstates;
- break;
-
- case 0x26: /* 38 - Lincroft Atom Processor */
- cpuidle_state_table = atom_cstates;
- auto_demotion_disable_flags = ATM_LNC_C6_AUTO_DEMOTE;
- break;
-
- case 0x2A: /* SNB */
- case 0x2D: /* SNB Xeon */
- cpuidle_state_table = snb_cstates;
- break;
-
- default:
- pr_debug(PREFIX "does not run on family %d model %d\n",
- boot_cpu_data.x86, boot_cpu_data.x86_model);
- return -ENODEV;
- }
+ icpu = (const struct idle_cpu *)id->driver_data;
+ cpuidle_state_table = icpu->state_table;
if (boot_cpu_has(X86_FEATURE_ARAT)) /* Always Reliable APIC Timer */
lapic_timer_reliable_states = LAPIC_TIMER_ALWAYS_RELIABLE;
@@ -470,7 +486,7 @@
drv->state_count += 1;
}
- if (auto_demotion_disable_flags)
+ if (icpu->auto_demotion_disable_flags)
on_each_cpu(auto_demotion_disable, NULL, 1);
return 0;
@@ -522,7 +538,7 @@
return -EIO;
}
- if (auto_demotion_disable_flags)
+ if (icpu->auto_demotion_disable_flags)
smp_call_function_single(cpu, auto_demotion_disable, NULL, 1);
return 0;
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c
index c351aa4..da739d9 100644
--- a/drivers/input/gameport/gameport.c
+++ b/drivers/input/gameport/gameport.c
@@ -449,7 +449,6 @@
} else if ((drv = driver_find(buf, &gameport_bus)) != NULL) {
gameport_disconnect_port(gameport);
error = gameport_bind_driver(gameport, to_gameport_driver(drv));
- put_driver(drv);
} else {
error = -EINVAL;
}
diff --git a/drivers/input/serio/serio.c b/drivers/input/serio/serio.c
index ba70058..d0f7533 100644
--- a/drivers/input/serio/serio.c
+++ b/drivers/input/serio/serio.c
@@ -441,7 +441,6 @@
} else if ((drv = driver_find(buf, &serio_bus)) != NULL) {
serio_disconnect_port(serio);
error = serio_bind_driver(serio, to_serio_driver(drv));
- put_driver(drv);
serio_remove_duplicate_events(serio, SERIO_RESCAN_PORT);
} else {
error = -EINVAL;
diff --git a/drivers/media/video/cx18/cx18-alsa-main.c b/drivers/media/video/cx18/cx18-alsa-main.c
index a1e6c2a..e118361 100644
--- a/drivers/media/video/cx18/cx18-alsa-main.c
+++ b/drivers/media/video/cx18/cx18-alsa-main.c
@@ -285,7 +285,6 @@
drv = driver_find("cx18", &pci_bus_type);
ret = driver_for_each_device(drv, NULL, NULL, cx18_alsa_exit_callback);
- put_driver(drv);
cx18_ext_init = NULL;
printk(KERN_INFO "cx18-alsa: module unload complete\n");
diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c
index d0fbfcf..e5e7fa9 100644
--- a/drivers/media/video/ivtv/ivtvfb.c
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -1293,7 +1293,6 @@
drv = driver_find("ivtv", &pci_bus_type);
err = driver_for_each_device(drv, NULL, ®istered, ivtvfb_callback_init);
- put_driver(drv);
if (!registered) {
printk(KERN_ERR "ivtvfb: no cards found\n");
return -ENODEV;
@@ -1310,7 +1309,6 @@
drv = driver_find("ivtv", &pci_bus_type);
err = driver_for_each_device(drv, NULL, NULL, ivtvfb_callback_cleanup);
- put_driver(drv);
}
module_init(ivtvfb_init);
diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.c b/drivers/media/video/s5p-fimc/fimc-mdevice.c
index 8ea4ee1..63eccb5 100644
--- a/drivers/media/video/s5p-fimc/fimc-mdevice.c
+++ b/drivers/media/video/s5p-fimc/fimc-mdevice.c
@@ -344,16 +344,13 @@
return -ENODEV;
ret = driver_for_each_device(driver, NULL, fmd,
fimc_register_callback);
- put_driver(driver);
if (ret)
return ret;
driver = driver_find(CSIS_DRIVER_NAME, &platform_bus_type);
- if (driver) {
+ if (driver)
ret = driver_for_each_device(driver, NULL, fmd,
csis_register_callback);
- put_driver(driver);
- }
return ret;
}
diff --git a/drivers/media/video/s5p-tv/mixer_video.c b/drivers/media/video/s5p-tv/mixer_video.c
index 7884bae..f7ca5cc 100644
--- a/drivers/media/video/s5p-tv/mixer_video.c
+++ b/drivers/media/video/s5p-tv/mixer_video.c
@@ -58,7 +58,6 @@
}
done:
- put_driver(drv);
return sd;
}
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 11e589c..bdfd055 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1326,7 +1326,7 @@
if (ret)
goto unmap;
- if (dev->irq[1] == NO_IRQ)
+ if (dev->irq[1] == NO_IRQ || !dev->irq[1])
host->singleirq = true;
else {
ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED,
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index f320f46..e8c42d6 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -915,9 +915,7 @@
phydev = to_phy_device(dev);
- /* Make sure the driver is held.
- * XXX -- Is this correct? */
- drv = get_driver(phydev->dev.driver);
+ drv = phydev->dev.driver;
phydrv = to_phy_driver(drv);
phydev->drv = phydrv;
@@ -957,8 +955,6 @@
if (phydev->drv->remove)
phydev->drv->remove(phydev);
-
- put_driver(dev->driver);
phydev->drv = NULL;
return 0;
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 63b3ec4..cae9477 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -253,7 +253,7 @@
if (!of_device_is_available(node))
return NULL;
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ dev = amba_device_alloc(NULL, 0, 0);
if (!dev)
return NULL;
@@ -283,14 +283,14 @@
if (ret)
goto err_free;
- ret = amba_device_register(dev, &iomem_resource);
+ ret = amba_device_add(dev, &iomem_resource);
if (ret)
goto err_free;
return dev;
err_free:
- kfree(dev);
+ amba_device_put(dev);
return NULL;
}
#else /* CONFIG_ARM_AMBA */
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 3623d65..8d9616b 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -72,9 +72,7 @@
list_add_tail(&dynid->node, &drv->dynids.list);
spin_unlock(&drv->dynids.lock);
- get_driver(&drv->driver);
retval = driver_attach(&drv->driver);
- put_driver(&drv->driver);
return retval;
}
@@ -190,43 +188,34 @@
static DRIVER_ATTR(remove_id, S_IWUSR, NULL, store_remove_id);
static int
-pci_create_newid_file(struct pci_driver *drv)
+pci_create_newid_files(struct pci_driver *drv)
{
int error = 0;
- if (drv->probe != NULL)
+
+ if (drv->probe != NULL) {
error = driver_create_file(&drv->driver, &driver_attr_new_id);
+ if (error == 0) {
+ error = driver_create_file(&drv->driver,
+ &driver_attr_remove_id);
+ if (error)
+ driver_remove_file(&drv->driver,
+ &driver_attr_new_id);
+ }
+ }
return error;
}
-static void pci_remove_newid_file(struct pci_driver *drv)
-{
- driver_remove_file(&drv->driver, &driver_attr_new_id);
-}
-
-static int
-pci_create_removeid_file(struct pci_driver *drv)
-{
- int error = 0;
- if (drv->probe != NULL)
- error = driver_create_file(&drv->driver,&driver_attr_remove_id);
- return error;
-}
-
-static void pci_remove_removeid_file(struct pci_driver *drv)
+static void pci_remove_newid_files(struct pci_driver *drv)
{
driver_remove_file(&drv->driver, &driver_attr_remove_id);
+ driver_remove_file(&drv->driver, &driver_attr_new_id);
}
#else /* !CONFIG_HOTPLUG */
-static inline int pci_create_newid_file(struct pci_driver *drv)
+static inline int pci_create_newid_files(struct pci_driver *drv)
{
return 0;
}
-static inline void pci_remove_newid_file(struct pci_driver *drv) {}
-static inline int pci_create_removeid_file(struct pci_driver *drv)
-{
- return 0;
-}
-static inline void pci_remove_removeid_file(struct pci_driver *drv) {}
+static inline void pci_remove_newid_files(struct pci_driver *drv) {}
#endif
/**
@@ -1138,18 +1127,12 @@
if (error)
goto out;
- error = pci_create_newid_file(drv);
+ error = pci_create_newid_files(drv);
if (error)
goto out_newid;
-
- error = pci_create_removeid_file(drv);
- if (error)
- goto out_removeid;
out:
return error;
-out_removeid:
- pci_remove_newid_file(drv);
out_newid:
driver_unregister(&drv->driver);
goto out;
@@ -1168,8 +1151,7 @@
void
pci_unregister_driver(struct pci_driver *drv)
{
- pci_remove_removeid_file(drv);
- pci_remove_newid_file(drv);
+ pci_remove_newid_files(drv);
driver_unregister(&drv->driver);
pci_free_dynids(drv);
}
diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c
index 1620088..4010901 100644
--- a/drivers/pci/xen-pcifront.c
+++ b/drivers/pci/xen-pcifront.c
@@ -593,7 +593,7 @@
}
pdrv = pcidev->driver;
- if (get_driver(&pdrv->driver)) {
+ if (pdrv) {
if (pdrv->err_handler && pdrv->err_handler->error_detected) {
dev_dbg(&pcidev->dev,
"trying to call AER service\n");
@@ -623,7 +623,6 @@
}
}
}
- put_driver(&pdrv->driver);
}
if (!flag)
result = PCI_ERS_RESULT_NONE;
diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c
index 1932029..079629b 100644
--- a/drivers/pcmcia/ds.c
+++ b/drivers/pcmcia/ds.c
@@ -127,10 +127,7 @@
list_add_tail(&dynid->node, &pdrv->dynids.list);
mutex_unlock(&pdrv->dynids.lock);
- if (get_driver(&pdrv->drv)) {
- retval = driver_attach(&pdrv->drv);
- put_driver(&pdrv->drv);
- }
+ retval = driver_attach(&pdrv->drv);
if (retval)
return retval;
@@ -160,6 +157,11 @@
return error;
}
+static void
+pcmcia_remove_newid_file(struct pcmcia_driver *drv)
+{
+ driver_remove_file(&drv->drv, &driver_attr_new_id);
+}
/**
* pcmcia_register_driver - register a PCMCIA driver with the bus core
@@ -204,6 +206,7 @@
void pcmcia_unregister_driver(struct pcmcia_driver *driver)
{
pr_debug("unregistering driver %s\n", driver->name);
+ pcmcia_remove_newid_file(driver);
driver_unregister(&driver->drv);
pcmcia_free_dynids(driver);
}
diff --git a/drivers/s390/cio/ccwgroup.c b/drivers/s390/cio/ccwgroup.c
index 4f1989d..5f1dc6f 100644
--- a/drivers/s390/cio/ccwgroup.c
+++ b/drivers/s390/cio/ccwgroup.c
@@ -580,7 +580,6 @@
struct device *dev;
/* We don't want ccwgroup devices to live longer than their driver. */
- get_driver(&cdriver->driver);
while ((dev = driver_find_device(&cdriver->driver, NULL, NULL,
__ccwgroup_match_all))) {
struct ccwgroup_device *gdev = to_ccwgroupdev(dev);
@@ -592,7 +591,6 @@
mutex_unlock(&gdev->reg_mutex);
put_device(dev);
}
- put_driver(&cdriver->driver);
driver_unregister(&cdriver->driver);
}
EXPORT_SYMBOL(ccwgroup_driver_unregister);
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index 4726985..02d0152 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -1676,15 +1676,9 @@
const char *bus_id)
{
struct device *dev;
- struct device_driver *drv;
- drv = get_driver(&cdrv->driver);
- if (!drv)
- return NULL;
-
- dev = driver_find_device(drv, NULL, (void *)bus_id,
+ dev = driver_find_device(&cdrv->driver, NULL, (void *)bus_id,
__ccwdev_check_busid);
- put_driver(drv);
return dev ? to_ccwdev(dev) : NULL;
}
diff --git a/drivers/s390/net/smsgiucv_app.c b/drivers/s390/net/smsgiucv_app.c
index 4d2ea40..32515a20 100644
--- a/drivers/s390/net/smsgiucv_app.c
+++ b/drivers/s390/net/smsgiucv_app.c
@@ -168,7 +168,7 @@
rc = dev_set_name(smsg_app_dev, KMSG_COMPONENT);
if (rc) {
kfree(smsg_app_dev);
- goto fail_put_driver;
+ goto fail;
}
smsg_app_dev->bus = &iucv_bus;
smsg_app_dev->parent = iucv_root;
@@ -177,7 +177,7 @@
rc = device_register(smsg_app_dev);
if (rc) {
put_device(smsg_app_dev);
- goto fail_put_driver;
+ goto fail;
}
/* convert sender to uppercase characters */
@@ -191,12 +191,11 @@
rc = smsg_register_callback(SMSG_PREFIX, smsg_app_callback);
if (rc) {
device_unregister(smsg_app_dev);
- goto fail_put_driver;
+ goto fail;
}
rc = 0;
-fail_put_driver:
- put_driver(smsgiucv_drv);
+fail:
return rc;
}
module_init(smsgiucv_app_init);
diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c
index bb6317f..ff109ae 100644
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -140,19 +140,6 @@
put_device(dev->dev);
}
-static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv)
-{
- if (drv)
- get_driver(&drv->drv);
- return drv;
-}
-
-static inline void ssb_driver_put(struct ssb_driver *drv)
-{
- if (drv)
- put_driver(&drv->drv);
-}
-
static int ssb_device_resume(struct device *dev)
{
struct ssb_device *ssb_dev = dev_to_ssb_dev(dev);
@@ -250,11 +237,9 @@
ssb_device_put(sdev);
continue;
}
- sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver));
- if (!sdrv || SSB_WARN_ON(!sdrv->remove)) {
- ssb_device_put(sdev);
+ sdrv = drv_to_ssb_drv(sdev->dev->driver);
+ if (SSB_WARN_ON(!sdrv->remove))
continue;
- }
sdrv->remove(sdev);
ctx->device_frozen[i] = 1;
}
@@ -293,7 +278,6 @@
dev_name(sdev->dev));
result = err;
}
- ssb_driver_put(sdrv);
ssb_device_put(sdev);
}
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index d40ff95..4fee024 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -71,10 +71,7 @@
list_add_tail(&dynid->node, &dynids->list);
spin_unlock(&dynids->lock);
- if (get_driver(driver)) {
- retval = driver_attach(driver);
- put_driver(driver);
- }
+ retval = driver_attach(driver);
if (retval)
return retval;
@@ -132,43 +129,39 @@
}
static DRIVER_ATTR(remove_id, S_IWUSR, NULL, store_remove_id);
-static int usb_create_newid_file(struct usb_driver *usb_drv)
+static int usb_create_newid_files(struct usb_driver *usb_drv)
{
int error = 0;
if (usb_drv->no_dynamic_id)
goto exit;
- if (usb_drv->probe != NULL)
+ if (usb_drv->probe != NULL) {
error = driver_create_file(&usb_drv->drvwrap.driver,
&driver_attr_new_id);
+ if (error == 0) {
+ error = driver_create_file(&usb_drv->drvwrap.driver,
+ &driver_attr_remove_id);
+ if (error)
+ driver_remove_file(&usb_drv->drvwrap.driver,
+ &driver_attr_new_id);
+ }
+ }
exit:
return error;
}
-static void usb_remove_newid_file(struct usb_driver *usb_drv)
+static void usb_remove_newid_files(struct usb_driver *usb_drv)
{
if (usb_drv->no_dynamic_id)
return;
- if (usb_drv->probe != NULL)
+ if (usb_drv->probe != NULL) {
+ driver_remove_file(&usb_drv->drvwrap.driver,
+ &driver_attr_remove_id);
driver_remove_file(&usb_drv->drvwrap.driver,
&driver_attr_new_id);
-}
-
-static int
-usb_create_removeid_file(struct usb_driver *drv)
-{
- int error = 0;
- if (drv->probe != NULL)
- error = driver_create_file(&drv->drvwrap.driver,
- &driver_attr_remove_id);
- return error;
-}
-
-static void usb_remove_removeid_file(struct usb_driver *drv)
-{
- driver_remove_file(&drv->drvwrap.driver, &driver_attr_remove_id);
+ }
}
static void usb_free_dynids(struct usb_driver *usb_drv)
@@ -183,22 +176,12 @@
spin_unlock(&usb_drv->dynids.lock);
}
#else
-static inline int usb_create_newid_file(struct usb_driver *usb_drv)
+static inline int usb_create_newid_files(struct usb_driver *usb_drv)
{
return 0;
}
-static void usb_remove_newid_file(struct usb_driver *usb_drv)
-{
-}
-
-static int
-usb_create_removeid_file(struct usb_driver *drv)
-{
- return 0;
-}
-
-static void usb_remove_removeid_file(struct usb_driver *drv)
+static void usb_remove_newid_files(struct usb_driver *usb_drv)
{
}
@@ -875,22 +858,16 @@
usbfs_update_special();
- retval = usb_create_newid_file(new_driver);
+ retval = usb_create_newid_files(new_driver);
if (retval)
goto out_newid;
- retval = usb_create_removeid_file(new_driver);
- if (retval)
- goto out_removeid;
-
pr_info("%s: registered new interface driver %s\n",
usbcore_name, new_driver->name);
out:
return retval;
-out_removeid:
- usb_remove_newid_file(new_driver);
out_newid:
driver_unregister(&new_driver->drvwrap.driver);
@@ -917,10 +894,9 @@
pr_info("%s: deregistering interface driver %s\n",
usbcore_name, driver->name);
- usb_remove_removeid_file(driver);
- usb_remove_newid_file(driver);
- usb_free_dynids(driver);
+ usb_remove_newid_files(driver);
driver_unregister(&driver->drvwrap.driver);
+ usb_free_dynids(driver);
usbfs_update_special();
}
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 64e1f7c..c68e427 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -171,14 +171,4 @@
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer");
-static int __devinit dwc3_pci_init(void)
-{
- return pci_register_driver(&dwc3_pci_driver);
-}
-module_init(dwc3_pci_init);
-
-static void __exit dwc3_pci_exit(void)
-{
- pci_unregister_driver(&dwc3_pci_driver);
-}
-module_exit(dwc3_pci_exit);
+module_pci_driver(dwc3_pci_driver);
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index fcbe742..df600d1 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -13,12 +13,11 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/w1-gpio.h>
+#include <linux/gpio.h>
#include "../w1.h"
#include "../w1_int.h"
-#include <asm/gpio.h>
-
static void w1_gpio_write_bit_dir(void *data, u8 bit)
{
struct w1_gpio_platform_data *pdata = data;
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index 956d5dd..b80bc84 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -23,9 +23,13 @@
#include <linux/debugfs.h>
#include <linux/fsnotify.h>
#include <linux/string.h>
+#include <linux/seq_file.h>
+#include <linux/parser.h>
#include <linux/magic.h>
#include <linux/slab.h>
+#define DEBUGFS_DEFAULT_MODE 0755
+
static struct vfsmount *debugfs_mount;
static int debugfs_mount_count;
static bool debugfs_registered;
@@ -125,11 +129,154 @@
return dentry->d_inode && !d_unhashed(dentry);
}
+struct debugfs_mount_opts {
+ uid_t uid;
+ gid_t gid;
+ umode_t mode;
+};
+
+enum {
+ Opt_uid,
+ Opt_gid,
+ Opt_mode,
+ Opt_err
+};
+
+static const match_table_t tokens = {
+ {Opt_uid, "uid=%u"},
+ {Opt_gid, "gid=%u"},
+ {Opt_mode, "mode=%o"},
+ {Opt_err, NULL}
+};
+
+struct debugfs_fs_info {
+ struct debugfs_mount_opts mount_opts;
+};
+
+static int debugfs_parse_options(char *data, struct debugfs_mount_opts *opts)
+{
+ substring_t args[MAX_OPT_ARGS];
+ int option;
+ int token;
+ char *p;
+
+ opts->mode = DEBUGFS_DEFAULT_MODE;
+
+ while ((p = strsep(&data, ",")) != NULL) {
+ if (!*p)
+ continue;
+
+ token = match_token(p, tokens, args);
+ switch (token) {
+ case Opt_uid:
+ if (match_int(&args[0], &option))
+ return -EINVAL;
+ opts->uid = option;
+ break;
+ case Opt_gid:
+ if (match_octal(&args[0], &option))
+ return -EINVAL;
+ opts->gid = option;
+ break;
+ case Opt_mode:
+ if (match_octal(&args[0], &option))
+ return -EINVAL;
+ opts->mode = option & S_IALLUGO;
+ break;
+ /*
+ * We might like to report bad mount options here;
+ * but traditionally debugfs has ignored all mount options
+ */
+ }
+ }
+
+ return 0;
+}
+
+static int debugfs_apply_options(struct super_block *sb)
+{
+ struct debugfs_fs_info *fsi = sb->s_fs_info;
+ struct inode *inode = sb->s_root->d_inode;
+ struct debugfs_mount_opts *opts = &fsi->mount_opts;
+
+ inode->i_mode &= ~S_IALLUGO;
+ inode->i_mode |= opts->mode;
+
+ inode->i_uid = opts->uid;
+ inode->i_gid = opts->gid;
+
+ return 0;
+}
+
+static int debugfs_remount(struct super_block *sb, int *flags, char *data)
+{
+ int err;
+ struct debugfs_fs_info *fsi = sb->s_fs_info;
+
+ err = debugfs_parse_options(data, &fsi->mount_opts);
+ if (err)
+ goto fail;
+
+ debugfs_apply_options(sb);
+
+fail:
+ return err;
+}
+
+static int debugfs_show_options(struct seq_file *m, struct dentry *root)
+{
+ struct debugfs_fs_info *fsi = root->d_sb->s_fs_info;
+ struct debugfs_mount_opts *opts = &fsi->mount_opts;
+
+ if (opts->uid != 0)
+ seq_printf(m, ",uid=%u", opts->uid);
+ if (opts->gid != 0)
+ seq_printf(m, ",gid=%u", opts->gid);
+ if (opts->mode != DEBUGFS_DEFAULT_MODE)
+ seq_printf(m, ",mode=%o", opts->mode);
+
+ return 0;
+}
+
+static const struct super_operations debugfs_super_operations = {
+ .statfs = simple_statfs,
+ .remount_fs = debugfs_remount,
+ .show_options = debugfs_show_options,
+};
+
static int debug_fill_super(struct super_block *sb, void *data, int silent)
{
static struct tree_descr debug_files[] = {{""}};
+ struct debugfs_fs_info *fsi;
+ int err;
- return simple_fill_super(sb, DEBUGFS_MAGIC, debug_files);
+ save_mount_options(sb, data);
+
+ fsi = kzalloc(sizeof(struct debugfs_fs_info), GFP_KERNEL);
+ sb->s_fs_info = fsi;
+ if (!fsi) {
+ err = -ENOMEM;
+ goto fail;
+ }
+
+ err = debugfs_parse_options(data, &fsi->mount_opts);
+ if (err)
+ goto fail;
+
+ err = simple_fill_super(sb, DEBUGFS_MAGIC, debug_files);
+ if (err)
+ goto fail;
+
+ sb->s_op = &debugfs_super_operations;
+
+ debugfs_apply_options(sb);
+
+ return 0;
+
+fail:
+ kfree(fsi);
+ sb->s_fs_info = NULL;
+ return err;
}
static struct dentry *debug_mount(struct file_system_type *fs_type,
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index 7fdf6a7..dd3779c 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -22,76 +22,100 @@
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/security.h>
+#include <linux/hash.h>
#include "sysfs.h"
DEFINE_MUTEX(sysfs_mutex);
DEFINE_SPINLOCK(sysfs_assoc_lock);
+#define to_sysfs_dirent(X) rb_entry((X), struct sysfs_dirent, s_rb);
+
static DEFINE_SPINLOCK(sysfs_ino_lock);
static DEFINE_IDA(sysfs_ino_ida);
/**
- * sysfs_link_sibling - link sysfs_dirent into sibling list
+ * sysfs_name_hash
+ * @ns: Namespace tag to hash
+ * @name: Null terminated string to hash
+ *
+ * Returns 31 bit hash of ns + name (so it fits in an off_t )
+ */
+static unsigned int sysfs_name_hash(const void *ns, const char *name)
+{
+ unsigned long hash = init_name_hash();
+ unsigned int len = strlen(name);
+ while (len--)
+ hash = partial_name_hash(*name++, hash);
+ hash = ( end_name_hash(hash) ^ hash_ptr( (void *)ns, 31 ) );
+ hash &= 0x7fffffffU;
+ /* Reserve hash numbers 0, 1 and INT_MAX for magic directory entries */
+ if (hash < 1)
+ hash += 2;
+ if (hash >= INT_MAX)
+ hash = INT_MAX - 1;
+ return hash;
+}
+
+static int sysfs_name_compare(unsigned int hash, const void *ns,
+ const char *name, const struct sysfs_dirent *sd)
+{
+ if (hash != sd->s_hash)
+ return hash - sd->s_hash;
+ if (ns != sd->s_ns)
+ return ns - sd->s_ns;
+ return strcmp(name, sd->s_name);
+}
+
+static int sysfs_sd_compare(const struct sysfs_dirent *left,
+ const struct sysfs_dirent *right)
+{
+ return sysfs_name_compare(left->s_hash, left->s_ns, left->s_name,
+ right);
+}
+
+/**
+ * sysfs_link_subling - link sysfs_dirent into sibling rbtree
* @sd: sysfs_dirent of interest
*
- * Link @sd into its sibling list which starts from
+ * Link @sd into its sibling rbtree which starts from
* sd->s_parent->s_dir.children.
*
* Locking:
* mutex_lock(sysfs_mutex)
+ *
+ * RETURNS:
+ * 0 on susccess -EEXIST on failure.
*/
-static void sysfs_link_sibling(struct sysfs_dirent *sd)
+static int sysfs_link_sibling(struct sysfs_dirent *sd)
{
- struct sysfs_dirent *parent_sd = sd->s_parent;
+ struct rb_node **node = &sd->s_parent->s_dir.children.rb_node;
+ struct rb_node *parent = NULL;
- struct rb_node **p;
- struct rb_node *parent;
+ while (*node) {
+ struct sysfs_dirent *pos;
+ int result;
- if (sysfs_type(sd) == SYSFS_DIR)
- parent_sd->s_dir.subdirs++;
-
- p = &parent_sd->s_dir.inode_tree.rb_node;
- parent = NULL;
- while (*p) {
- parent = *p;
-#define node rb_entry(parent, struct sysfs_dirent, inode_node)
- if (sd->s_ino < node->s_ino) {
- p = &node->inode_node.rb_left;
- } else if (sd->s_ino > node->s_ino) {
- p = &node->inode_node.rb_right;
- } else {
- printk(KERN_CRIT "sysfs: inserting duplicate inode '%lx'\n",
- (unsigned long) sd->s_ino);
- BUG();
- }
-#undef node
+ pos = to_sysfs_dirent(*node);
+ parent = *node;
+ result = sysfs_sd_compare(sd, pos);
+ if (result < 0)
+ node = &pos->s_rb.rb_left;
+ else if (result > 0)
+ node = &pos->s_rb.rb_right;
+ else
+ return -EEXIST;
}
- rb_link_node(&sd->inode_node, parent, p);
- rb_insert_color(&sd->inode_node, &parent_sd->s_dir.inode_tree);
-
- p = &parent_sd->s_dir.name_tree.rb_node;
- parent = NULL;
- while (*p) {
- int c;
- parent = *p;
-#define node rb_entry(parent, struct sysfs_dirent, name_node)
- c = strcmp(sd->s_name, node->s_name);
- if (c < 0) {
- p = &node->name_node.rb_left;
- } else {
- p = &node->name_node.rb_right;
- }
-#undef node
- }
- rb_link_node(&sd->name_node, parent, p);
- rb_insert_color(&sd->name_node, &parent_sd->s_dir.name_tree);
+ /* add new node and rebalance the tree */
+ rb_link_node(&sd->s_rb, parent, node);
+ rb_insert_color(&sd->s_rb, &sd->s_parent->s_dir.children);
+ return 0;
}
/**
- * sysfs_unlink_sibling - unlink sysfs_dirent from sibling list
+ * sysfs_unlink_sibling - unlink sysfs_dirent from sibling rbtree
* @sd: sysfs_dirent of interest
*
- * Unlink @sd from its sibling list which starts from
+ * Unlink @sd from its sibling rbtree which starts from
* sd->s_parent->s_dir.children.
*
* Locking:
@@ -99,11 +123,7 @@
*/
static void sysfs_unlink_sibling(struct sysfs_dirent *sd)
{
- if (sysfs_type(sd) == SYSFS_DIR)
- sd->s_parent->s_dir.subdirs--;
-
- rb_erase(&sd->inode_node, &sd->s_parent->s_dir.inode_tree);
- rb_erase(&sd->name_node, &sd->s_parent->s_dir.name_tree);
+ rb_erase(&sd->s_rb, &sd->s_parent->s_dir.children);
}
/**
@@ -198,7 +218,7 @@
rwsem_release(&sd->dep_map, 1, _RET_IP_);
}
-static int sysfs_alloc_ino(ino_t *pino)
+static int sysfs_alloc_ino(unsigned int *pino)
{
int ino, rc;
@@ -217,7 +237,7 @@
return rc;
}
-static void sysfs_free_ino(ino_t ino)
+static void sysfs_free_ino(unsigned int ino)
{
spin_lock(&sysfs_ino_lock);
ida_remove(&sysfs_ino_ida, ino);
@@ -402,6 +422,7 @@
int __sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
{
struct sysfs_inode_attrs *ps_iattr;
+ int ret;
if (!!sysfs_ns_type(acxt->parent_sd) != !!sd->s_ns) {
WARN(1, KERN_WARNING "sysfs: ns %s in '%s' for '%s'\n",
@@ -410,12 +431,12 @@
return -EINVAL;
}
- if (sysfs_find_dirent(acxt->parent_sd, sd->s_ns, sd->s_name))
- return -EEXIST;
-
+ sd->s_hash = sysfs_name_hash(sd->s_ns, sd->s_name);
sd->s_parent = sysfs_get(acxt->parent_sd);
- sysfs_link_sibling(sd);
+ ret = sysfs_link_sibling(sd);
+ if (ret)
+ return ret;
/* Update timestamps on the parent */
ps_iattr = acxt->parent_sd->s_iattr;
@@ -565,8 +586,8 @@
const void *ns,
const unsigned char *name)
{
- struct rb_node *p = parent_sd->s_dir.name_tree.rb_node;
- struct sysfs_dirent *found = NULL;
+ struct rb_node *node = parent_sd->s_dir.children.rb_node;
+ unsigned int hash;
if (!!sysfs_ns_type(parent_sd) != !!ns) {
WARN(1, KERN_WARNING "sysfs: ns %s in '%s' for '%s'\n",
@@ -575,33 +596,21 @@
return NULL;
}
- while (p) {
- int c;
-#define node rb_entry(p, struct sysfs_dirent, name_node)
- c = strcmp(name, node->s_name);
- if (c < 0) {
- p = node->name_node.rb_left;
- } else if (c > 0) {
- p = node->name_node.rb_right;
- } else {
- found = node;
- p = node->name_node.rb_left;
- }
-#undef node
- }
+ hash = sysfs_name_hash(ns, name);
+ while (node) {
+ struct sysfs_dirent *sd;
+ int result;
- if (found) {
- while (found->s_ns != ns) {
- p = rb_next(&found->name_node);
- if (!p)
- return NULL;
- found = rb_entry(p, struct sysfs_dirent, name_node);
- if (strcmp(name, found->s_name))
- return NULL;
- }
+ sd = to_sysfs_dirent(node);
+ result = sysfs_name_compare(hash, ns, name, sd);
+ if (result < 0)
+ node = node->rb_left;
+ else if (result > 0)
+ node = node->rb_right;
+ else
+ return sd;
}
-
- return found;
+ return NULL;
}
/**
@@ -804,9 +813,9 @@
pr_debug("sysfs %s: removing dir\n", dir_sd->s_name);
sysfs_addrm_start(&acxt, dir_sd);
- pos = rb_first(&dir_sd->s_dir.inode_tree);
+ pos = rb_first(&dir_sd->s_dir.children);
while (pos) {
- struct sysfs_dirent *sd = rb_entry(pos, struct sysfs_dirent, inode_node);
+ struct sysfs_dirent *sd = to_sysfs_dirent(pos);
pos = rb_next(pos);
if (sysfs_type(sd) != SYSFS_DIR)
sysfs_remove_one(&acxt, sd);
@@ -863,6 +872,7 @@
dup_name = sd->s_name;
sd->s_name = new_name;
+ sd->s_hash = sysfs_name_hash(sd->s_ns, sd->s_name);
}
/* Move to the appropriate place in the appropriate directories rbtree. */
@@ -919,38 +929,36 @@
}
static struct sysfs_dirent *sysfs_dir_pos(const void *ns,
- struct sysfs_dirent *parent_sd, ino_t ino, struct sysfs_dirent *pos)
+ struct sysfs_dirent *parent_sd, loff_t hash, struct sysfs_dirent *pos)
{
if (pos) {
int valid = !(pos->s_flags & SYSFS_FLAG_REMOVED) &&
pos->s_parent == parent_sd &&
- ino == pos->s_ino;
+ hash == pos->s_hash;
sysfs_put(pos);
if (!valid)
pos = NULL;
}
- if (!pos && (ino > 1) && (ino < INT_MAX)) {
- struct rb_node *p = parent_sd->s_dir.inode_tree.rb_node;
- while (p) {
-#define node rb_entry(p, struct sysfs_dirent, inode_node)
- if (ino < node->s_ino) {
- pos = node;
- p = node->inode_node.rb_left;
- } else if (ino > node->s_ino) {
- p = node->inode_node.rb_right;
- } else {
- pos = node;
+ if (!pos && (hash > 1) && (hash < INT_MAX)) {
+ struct rb_node *node = parent_sd->s_dir.children.rb_node;
+ while (node) {
+ pos = to_sysfs_dirent(node);
+
+ if (hash < pos->s_hash)
+ node = node->rb_left;
+ else if (hash > pos->s_hash)
+ node = node->rb_right;
+ else
break;
- }
-#undef node
}
}
+ /* Skip over entries in the wrong namespace */
while (pos && pos->s_ns != ns) {
- struct rb_node *p = rb_next(&pos->inode_node);
- if (!p)
+ struct rb_node *node = rb_next(&pos->s_rb);
+ if (!node)
pos = NULL;
else
- pos = rb_entry(p, struct sysfs_dirent, inode_node);
+ pos = to_sysfs_dirent(node);
}
return pos;
}
@@ -960,11 +968,11 @@
{
pos = sysfs_dir_pos(ns, parent_sd, ino, pos);
if (pos) do {
- struct rb_node *p = rb_next(&pos->inode_node);
- if (!p)
+ struct rb_node *node = rb_next(&pos->s_rb);
+ if (!node)
pos = NULL;
else
- pos = rb_entry(p, struct sysfs_dirent, inode_node);
+ pos = to_sysfs_dirent(node);
} while (pos && pos->s_ns != ns);
return pos;
}
@@ -1006,7 +1014,7 @@
len = strlen(name);
ino = pos->s_ino;
type = dt_type(pos);
- filp->f_pos = ino;
+ filp->f_pos = pos->s_hash;
filp->private_data = sysfs_get(pos);
mutex_unlock(&sysfs_mutex);
diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c
index 85eb816..4291fd1 100644
--- a/fs/sysfs/inode.c
+++ b/fs/sysfs/inode.c
@@ -216,9 +216,6 @@
iattrs->ia_secdata,
iattrs->ia_secdata_len);
}
-
- if (sysfs_type(sd) == SYSFS_DIR)
- set_nlink(inode, sd->s_dir.subdirs + 2);
}
int sysfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
diff --git a/fs/sysfs/mount.c b/fs/sysfs/mount.c
index e34f0d9..140f26a 100644
--- a/fs/sysfs/mount.c
+++ b/fs/sysfs/mount.c
@@ -36,7 +36,7 @@
.s_name = "",
.s_count = ATOMIC_INIT(1),
.s_flags = SYSFS_DIR | (KOBJ_NS_TYPE_NONE << SYSFS_NS_TYPE_SHIFT),
- .s_mode = S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO,
+ .s_mode = S_IFDIR | S_IRUGO | S_IXUGO,
.s_ino = 1,
};
diff --git a/fs/sysfs/sysfs.h b/fs/sysfs/sysfs.h
index 7484a36..6289a00 100644
--- a/fs/sysfs/sysfs.h
+++ b/fs/sysfs/sysfs.h
@@ -19,10 +19,8 @@
struct sysfs_elem_dir {
struct kobject *kobj;
- unsigned long subdirs;
-
- struct rb_root inode_tree;
- struct rb_root name_tree;
+ /* children rbtree starts here and goes through sd->s_rb */
+ struct rb_root children;
};
struct sysfs_elem_symlink {
@@ -62,8 +60,7 @@
struct sysfs_dirent *s_parent;
const char *s_name;
- struct rb_node inode_node;
- struct rb_node name_node;
+ struct rb_node s_rb;
union {
struct completion *completion;
@@ -71,6 +68,7 @@
} u;
const void *s_ns; /* namespace tag */
+ unsigned int s_hash; /* ns + name hash */
union {
struct sysfs_elem_dir s_dir;
struct sysfs_elem_symlink s_symlink;
@@ -78,9 +76,9 @@
struct sysfs_elem_bin_attr s_bin_attr;
};
- unsigned int s_flags;
+ unsigned short s_flags;
umode_t s_mode;
- ino_t s_ino;
+ unsigned int s_ino;
struct sysfs_inode_attrs *s_iattr;
};
@@ -95,11 +93,11 @@
#define SYSFS_ACTIVE_REF (SYSFS_KOBJ_ATTR | SYSFS_KOBJ_BIN_ATTR)
/* identify any namespace tag on sysfs_dirents */
-#define SYSFS_NS_TYPE_MASK 0xff00
+#define SYSFS_NS_TYPE_MASK 0xf00
#define SYSFS_NS_TYPE_SHIFT 8
#define SYSFS_FLAG_MASK ~(SYSFS_NS_TYPE_MASK|SYSFS_TYPE_MASK)
-#define SYSFS_FLAG_REMOVED 0x020000
+#define SYSFS_FLAG_REMOVED 0x02000
static inline unsigned int sysfs_type(struct sysfs_dirent *sd)
{
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 8cf7e98..9d65047 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -225,6 +225,7 @@
} piix4;
};
+extern void acpi_processor_load_module(struct acpi_processor *pr);
extern int acpi_processor_preregister_performance(struct
acpi_processor_performance
__percpu *performance);
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 724c69c..a9fab83 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -60,6 +60,9 @@
int amba_driver_register(struct amba_driver *);
void amba_driver_unregister(struct amba_driver *);
+struct amba_device *amba_device_alloc(const char *, resource_size_t, size_t);
+void amba_device_put(struct amba_device *);
+int amba_device_add(struct amba_device *, struct resource *);
int amba_device_register(struct amba_device *, struct resource *);
void amba_device_unregister(struct amba_device *);
struct amba_device *amba_find_device(const char *, struct device *, unsigned int, unsigned int);
@@ -89,4 +92,37 @@
#define amba_manf(d) AMBA_MANF_BITS((d)->periphid)
#define amba_part(d) AMBA_PART_BITS((d)->periphid)
+#define __AMBA_DEV(busid, data, mask) \
+ { \
+ .coherent_dma_mask = mask, \
+ .init_name = busid, \
+ .platform_data = data, \
+ }
+
+/*
+ * APB devices do not themselves have the ability to address memory,
+ * so DMA masks should be zero (much like USB peripheral devices.)
+ * The DMA controller DMA masks should be used instead (much like
+ * USB host controllers in conventional PCs.)
+ */
+#define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) \
+struct amba_device name##_device = { \
+ .dev = __AMBA_DEV(busid, data, 0), \
+ .res = DEFINE_RES_MEM(base, SZ_4K), \
+ .irq = irqs, \
+ .periphid = id, \
+}
+
+/*
+ * AHB devices are DMA capable, so set their DMA masks
+ */
+#define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data) \
+struct amba_device name##_device = { \
+ .dev = __AMBA_DEV(busid, data, ~0ULL), \
+ .res = DEFINE_RES_MEM(base, SZ_4K), \
+ .dma_mask = ~0ULL, \
+ .irq = irqs, \
+ .periphid = id, \
+}
+
#endif
diff --git a/include/linux/connector.h b/include/linux/connector.h
index 3c9c54f..7638407 100644
--- a/include/linux/connector.h
+++ b/include/linux/connector.h
@@ -43,6 +43,7 @@
#define CN_IDX_DRBD 0x8
#define CN_VAL_DRBD 0x1
#define CN_KVP_IDX 0x9 /* HyperV KVP */
+#define CN_KVP_VAL 0x1 /* queries from the kernel */
#define CN_NETLINK_USERS 10 /* Highest index + 1 */
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index 1f65875..6e53b48 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -44,6 +44,13 @@
#endif
struct notifier_block;
+#ifdef CONFIG_ARCH_HAS_CPU_AUTOPROBE
+extern int arch_cpu_uevent(struct device *dev, struct kobj_uevent_env *env);
+extern ssize_t arch_print_cpu_modalias(struct device *dev,
+ struct device_attribute *attr,
+ char *bufptr);
+#endif
+
/*
* CPU notifier priorities.
*/
diff --git a/include/linux/device.h b/include/linux/device.h
index b63fb39..f62e216 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -238,8 +238,6 @@
extern int __must_check driver_register(struct device_driver *drv);
extern void driver_unregister(struct device_driver *drv);
-extern struct device_driver *get_driver(struct device_driver *drv);
-extern void put_driver(struct device_driver *drv);
extern struct device_driver *driver_find(const char *name,
struct bus_type *bus);
extern int driver_probe_done(void);
@@ -946,14 +944,14 @@
#define dev_info(dev, fmt, arg...) _dev_info(dev, fmt, ##arg)
-#if defined(DEBUG)
-#define dev_dbg(dev, format, arg...) \
- dev_printk(KERN_DEBUG, dev, format, ##arg)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG)
#define dev_dbg(dev, format, ...) \
do { \
dynamic_dev_dbg(dev, format, ##__VA_ARGS__); \
} while (0)
+#elif defined(DEBUG)
+#define dev_dbg(dev, format, arg...) \
+ dev_printk(KERN_DEBUG, dev, format, ##arg)
#else
#define dev_dbg(dev, format, arg...) \
({ \
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index 0564e3c..7e3c53a 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -15,20 +15,24 @@
const char *function;
const char *filename;
const char *format;
- unsigned int lineno:24;
+ unsigned int lineno:18;
/*
* The flags field controls the behaviour at the callsite.
* The bits here are changed dynamically when the user
* writes commands to <debugfs>/dynamic_debug/control
*/
-#define _DPRINTK_FLAGS_PRINT (1<<0) /* printk() a message using the format */
+#define _DPRINTK_FLAGS_NONE 0
+#define _DPRINTK_FLAGS_PRINT (1<<0) /* printk() a message using the format */
#define _DPRINTK_FLAGS_INCL_MODNAME (1<<1)
#define _DPRINTK_FLAGS_INCL_FUNCNAME (1<<2)
#define _DPRINTK_FLAGS_INCL_LINENO (1<<3)
#define _DPRINTK_FLAGS_INCL_TID (1<<4)
+#if defined DEBUG
+#define _DPRINTK_FLAGS_DEFAULT _DPRINTK_FLAGS_PRINT
+#else
#define _DPRINTK_FLAGS_DEFAULT 0
+#endif
unsigned int flags:8;
- char enabled;
} __attribute__((aligned(8)));
@@ -62,21 +66,20 @@
.format = (fmt), \
.lineno = __LINE__, \
.flags = _DPRINTK_FLAGS_DEFAULT, \
- .enabled = false, \
}
#define dynamic_pr_debug(fmt, ...) \
do { \
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
- if (unlikely(descriptor.enabled)) \
+ if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT)) \
__dynamic_pr_debug(&descriptor, pr_fmt(fmt), \
##__VA_ARGS__); \
} while (0)
#define dynamic_dev_dbg(dev, fmt, ...) \
do { \
- DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
- if (unlikely(descriptor.enabled)) \
+ DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
+ if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT)) \
__dynamic_dev_dbg(&descriptor, dev, fmt, \
##__VA_ARGS__); \
} while (0)
@@ -84,7 +87,7 @@
#define dynamic_netdev_dbg(dev, fmt, ...) \
do { \
DEFINE_DYNAMIC_DEBUG_METADATA(descriptor, fmt); \
- if (unlikely(descriptor.enabled)) \
+ if (unlikely(descriptor.flags & _DPRINTK_FLAGS_PRINT)) \
__dynamic_netdev_dbg(&descriptor, dev, fmt, \
##__VA_ARGS__); \
} while (0)
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 0ae065a..e57a6c6 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -25,6 +25,147 @@
#ifndef _HYPERV_H
#define _HYPERV_H
+#include <linux/types.h>
+
+/*
+ * An implementation of HyperV key value pair (KVP) functionality for Linux.
+ *
+ *
+ * Copyright (C) 2010, Novell, Inc.
+ * Author : K. Y. Srinivasan <ksrinivasan@novell.com>
+ *
+ */
+
+/*
+ * Maximum value size - used for both key names and value data, and includes
+ * any applicable NULL terminators.
+ *
+ * Note: This limit is somewhat arbitrary, but falls easily within what is
+ * supported for all native guests (back to Win 2000) and what is reasonable
+ * for the IC KVP exchange functionality. Note that Windows Me/98/95 are
+ * limited to 255 character key names.
+ *
+ * MSDN recommends not storing data values larger than 2048 bytes in the
+ * registry.
+ *
+ * Note: This value is used in defining the KVP exchange message - this value
+ * cannot be modified without affecting the message size and compatibility.
+ */
+
+/*
+ * bytes, including any null terminators
+ */
+#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE (2048)
+
+
+/*
+ * Maximum key size - the registry limit for the length of an entry name
+ * is 256 characters, including the null terminator
+ */
+
+#define HV_KVP_EXCHANGE_MAX_KEY_SIZE (512)
+
+/*
+ * In Linux, we implement the KVP functionality in two components:
+ * 1) The kernel component which is packaged as part of the hv_utils driver
+ * is responsible for communicating with the host and responsible for
+ * implementing the host/guest protocol. 2) A user level daemon that is
+ * responsible for data gathering.
+ *
+ * Host/Guest Protocol: The host iterates over an index and expects the guest
+ * to assign a key name to the index and also return the value corresponding to
+ * the key. The host will have atmost one KVP transaction outstanding at any
+ * given point in time. The host side iteration stops when the guest returns
+ * an error. Microsoft has specified the following mapping of key names to
+ * host specified index:
+ *
+ * Index Key Name
+ * 0 FullyQualifiedDomainName
+ * 1 IntegrationServicesVersion
+ * 2 NetworkAddressIPv4
+ * 3 NetworkAddressIPv6
+ * 4 OSBuildNumber
+ * 5 OSName
+ * 6 OSMajorVersion
+ * 7 OSMinorVersion
+ * 8 OSVersion
+ * 9 ProcessorArchitecture
+ *
+ * The Windows host expects the Key Name and Key Value to be encoded in utf16.
+ *
+ * Guest Kernel/KVP Daemon Protocol: As noted earlier, we implement all of the
+ * data gathering functionality in a user mode daemon. The user level daemon
+ * is also responsible for binding the key name to the index as well. The
+ * kernel and user-level daemon communicate using a connector channel.
+ *
+ * The user mode component first registers with the
+ * the kernel component. Subsequently, the kernel component requests, data
+ * for the specified keys. In response to this message the user mode component
+ * fills in the value corresponding to the specified key. We overload the
+ * sequence field in the cn_msg header to define our KVP message types.
+ *
+ *
+ * The kernel component simply acts as a conduit for communication between the
+ * Windows host and the user-level daemon. The kernel component passes up the
+ * index received from the Host to the user-level daemon. If the index is
+ * valid (supported), the corresponding key as well as its
+ * value (both are strings) is returned. If the index is invalid
+ * (not supported), a NULL key string is returned.
+ */
+
+
+/*
+ * Registry value types.
+ */
+
+#define REG_SZ 1
+
+enum hv_kvp_exchg_op {
+ KVP_OP_GET = 0,
+ KVP_OP_SET,
+ KVP_OP_DELETE,
+ KVP_OP_ENUMERATE,
+ KVP_OP_REGISTER,
+ KVP_OP_COUNT /* Number of operations, must be last. */
+};
+
+enum hv_kvp_exchg_pool {
+ KVP_POOL_EXTERNAL = 0,
+ KVP_POOL_GUEST,
+ KVP_POOL_AUTO,
+ KVP_POOL_AUTO_EXTERNAL,
+ KVP_POOL_AUTO_INTERNAL,
+ KVP_POOL_COUNT /* Number of pools, must be last. */
+};
+
+struct hv_kvp_hdr {
+ __u8 operation;
+ __u8 pool;
+ __u16 pad;
+} __attribute__((packed));
+
+struct hv_kvp_exchg_msg_value {
+ __u32 value_type;
+ __u32 key_size;
+ __u32 value_size;
+ __u8 key[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
+ __u8 value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE];
+} __attribute__((packed));
+
+struct hv_kvp_msg_enumerate {
+ __u32 index;
+ struct hv_kvp_exchg_msg_value data;
+} __attribute__((packed));
+
+struct hv_kvp_msg {
+ struct hv_kvp_hdr kvp_hdr;
+ union {
+ struct hv_kvp_msg_enumerate kvp_enum_data;
+ char kvp_version[HV_KVP_EXCHANGE_MAX_KEY_SIZE];
+ } body;
+} __attribute__((packed));
+
+#ifdef __KERNEL__
#include <linux/scatterlist.h>
#include <linux/list.h>
#include <linux/uuid.h>
@@ -870,4 +1011,9 @@
extern void vmbus_prep_negotiate_resp(struct icmsg_hdr *,
struct icmsg_negotiate *, u8 *);
+int hv_kvp_init(struct hv_util_service *);
+void hv_kvp_deinit(void);
+void hv_kvp_onchannelcallback(void *);
+
+#endif /* __KERNEL__ */
#endif /* _HYPERV_H */
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index 83ac071..fb69ad1 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -560,4 +560,25 @@
#endif
};
+/*
+ * Match x86 CPUs for CPU specific drivers.
+ * See documentation of "x86_match_cpu" for details.
+ */
+
+struct x86_cpu_id {
+ __u16 vendor;
+ __u16 family;
+ __u16 model;
+ __u16 feature; /* bit index */
+ kernel_ulong_t driver_data;
+};
+
+#define X86_FEATURE_MATCH(x) \
+ { X86_VENDOR_ANY, X86_FAMILY_ANY, X86_MODEL_ANY, x }
+
+#define X86_VENDOR_ANY 0xffff
+#define X86_FAMILY_ANY 0
+#define X86_MODEL_ANY 0
+#define X86_FEATURE_ANY 0 /* Same as FPU, you can't test for that */
+
#endif /* LINUX_MOD_DEVICETABLE_H */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 0eac07c..f486f63 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -2687,14 +2687,14 @@
#define MODULE_ALIAS_NETDEV(device) \
MODULE_ALIAS("netdev-" device)
-#if defined(DEBUG)
-#define netdev_dbg(__dev, format, args...) \
- netdev_printk(KERN_DEBUG, __dev, format, ##args)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG)
#define netdev_dbg(__dev, format, args...) \
do { \
dynamic_netdev_dbg(__dev, format, ##args); \
} while (0)
+#elif defined(DEBUG)
+#define netdev_dbg(__dev, format, args...) \
+ netdev_printk(KERN_DEBUG, __dev, format, ##args)
#else
#define netdev_dbg(__dev, format, args...) \
({ \
diff --git a/include/linux/pci.h b/include/linux/pci.h
index a16b1df..d4afd70 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -946,6 +946,19 @@
__pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME)
void pci_unregister_driver(struct pci_driver *dev);
+
+/**
+ * module_pci_driver() - Helper macro for registering a PCI driver
+ * @__pci_driver: pci_driver struct
+ *
+ * Helper macro for PCI drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_pci_driver(__pci_driver) \
+ module_driver(__pci_driver, pci_register_driver, \
+ pci_unregister_driver)
+
void pci_remove_behind_bridge(struct pci_dev *dev);
struct pci_driver *pci_dev_driver(const struct pci_dev *dev);
int pci_add_dynid(struct pci_driver *drv,
diff --git a/include/linux/platform_data/tegra_emc.h b/include/linux/platform_data/tegra_emc.h
new file mode 100644
index 0000000..df67505
--- /dev/null
+++ b/include/linux/platform_data/tegra_emc.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ * Colin Cross <ccross@android.com>
+ * Olof Johansson <olof@lixom.net>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __TEGRA_EMC_H_
+#define __TEGRA_EMC_H_
+
+#define TEGRA_EMC_NUM_REGS 46
+
+struct tegra_emc_table {
+ unsigned long rate;
+ u32 regs[TEGRA_EMC_NUM_REGS];
+};
+
+struct tegra_emc_pdata {
+ int num_tables;
+ struct tegra_emc_table *tables;
+};
+
+#endif
diff --git a/include/linux/printk.h b/include/linux/printk.h
index f0e22f7..f9abd93 100644
--- a/include/linux/printk.h
+++ b/include/linux/printk.h
@@ -180,13 +180,13 @@
#endif
/* If you are writing a driver, please use dev_dbg instead */
-#if defined(DEBUG)
-#define pr_debug(fmt, ...) \
- printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
-#elif defined(CONFIG_DYNAMIC_DEBUG)
+#if defined(CONFIG_DYNAMIC_DEBUG)
/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
#define pr_debug(fmt, ...) \
dynamic_pr_debug(fmt, ##__VA_ARGS__)
+#elif defined(DEBUG)
+#define pr_debug(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#else
#define pr_debug(fmt, ...) \
no_printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
diff --git a/include/linux/sys_soc.h b/include/linux/sys_soc.h
new file mode 100644
index 0000000..2739ccb
--- /dev/null
+++ b/include/linux/sys_soc.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ * Author: Lee Jones <lee.jones@linaro.org> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+#ifndef __SOC_BUS_H
+#define __SOC_BUS_H
+
+#include <linux/device.h>
+
+struct soc_device_attribute {
+ const char *machine;
+ const char *family;
+ const char *revision;
+ const char *soc_id;
+};
+
+/**
+ * soc_device_register - register SoC as a device
+ * @soc_plat_dev_attr: Attributes passed from platform to be attributed to a SoC
+ */
+struct soc_device *soc_device_register(
+ struct soc_device_attribute *soc_plat_dev_attr);
+
+/**
+ * soc_device_unregister - unregister SoC device
+ * @dev: SoC device to be unregistered
+ */
+void soc_device_unregister(struct soc_device *soc_dev);
+
+/**
+ * soc_device_to_device - helper function to fetch struct device
+ * @soc: Previously registered SoC device container
+ */
+struct device *soc_device_to_device(struct soc_device *soc);
+
+#endif /* __SOC_BUS_H */
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index fea790a..13ef233 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -170,7 +170,7 @@
return false;
/* driver filter on but not yet initialized */
- drv = get_driver(dev->driver);
+ drv = dev->driver;
if (!drv)
return false;
@@ -185,7 +185,6 @@
}
read_unlock_irqrestore(&driver_name_lock, flags);
- put_driver(drv);
return ret;
}
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index dcdade3..310c753 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -60,6 +60,7 @@
static DEFINE_MUTEX(ddebug_lock);
static LIST_HEAD(ddebug_tables);
static int verbose = 0;
+module_param(verbose, int, 0644);
/* Return the last part of a pathname */
static inline const char *basename(const char *path)
@@ -68,12 +69,24 @@
return tail ? tail+1 : path;
}
+/* Return the path relative to source root */
+static inline const char *trim_prefix(const char *path)
+{
+ int skip = strlen(__FILE__) - strlen("lib/dynamic_debug.c");
+
+ if (strncmp(path, __FILE__, skip))
+ skip = 0; /* prefix mismatch, don't skip */
+
+ return path + skip;
+}
+
static struct { unsigned flag:8; char opt_char; } opt_array[] = {
{ _DPRINTK_FLAGS_PRINT, 'p' },
{ _DPRINTK_FLAGS_INCL_MODNAME, 'm' },
{ _DPRINTK_FLAGS_INCL_FUNCNAME, 'f' },
{ _DPRINTK_FLAGS_INCL_LINENO, 'l' },
{ _DPRINTK_FLAGS_INCL_TID, 't' },
+ { _DPRINTK_FLAGS_NONE, '_' },
};
/* format a string into buf[] which describes the _ddebug's flags */
@@ -83,58 +96,74 @@
char *p = buf;
int i;
- BUG_ON(maxlen < 4);
+ BUG_ON(maxlen < 6);
for (i = 0; i < ARRAY_SIZE(opt_array); ++i)
if (dp->flags & opt_array[i].flag)
*p++ = opt_array[i].opt_char;
if (p == buf)
- *p++ = '-';
+ *p++ = '_';
*p = '\0';
return buf;
}
+#define vpr_info_dq(q, msg) \
+do { \
+ if (verbose) \
+ /* trim last char off format print */ \
+ pr_info("%s: func=\"%s\" file=\"%s\" " \
+ "module=\"%s\" format=\"%.*s\" " \
+ "lineno=%u-%u", \
+ msg, \
+ q->function ? q->function : "", \
+ q->filename ? q->filename : "", \
+ q->module ? q->module : "", \
+ (int)(q->format ? strlen(q->format) - 1 : 0), \
+ q->format ? q->format : "", \
+ q->first_lineno, q->last_lineno); \
+} while (0)
+
/*
- * Search the tables for _ddebug's which match the given
- * `query' and apply the `flags' and `mask' to them. Tells
- * the user which ddebug's were changed, or whether none
- * were matched.
+ * Search the tables for _ddebug's which match the given `query' and
+ * apply the `flags' and `mask' to them. Returns number of matching
+ * callsites, normally the same as number of changes. If verbose,
+ * logs the changes. Takes ddebug_lock.
*/
-static void ddebug_change(const struct ddebug_query *query,
- unsigned int flags, unsigned int mask)
+static int ddebug_change(const struct ddebug_query *query,
+ unsigned int flags, unsigned int mask)
{
int i;
struct ddebug_table *dt;
unsigned int newflags;
unsigned int nfound = 0;
- char flagbuf[8];
+ char flagbuf[10];
/* search for matching ddebugs */
mutex_lock(&ddebug_lock);
list_for_each_entry(dt, &ddebug_tables, link) {
/* match against the module name */
- if (query->module != NULL &&
- strcmp(query->module, dt->mod_name))
+ if (query->module && strcmp(query->module, dt->mod_name))
continue;
for (i = 0 ; i < dt->num_ddebugs ; i++) {
struct _ddebug *dp = &dt->ddebugs[i];
/* match against the source filename */
- if (query->filename != NULL &&
+ if (query->filename &&
strcmp(query->filename, dp->filename) &&
- strcmp(query->filename, basename(dp->filename)))
+ strcmp(query->filename, basename(dp->filename)) &&
+ strcmp(query->filename, trim_prefix(dp->filename)))
continue;
/* match against the function */
- if (query->function != NULL &&
+ if (query->function &&
strcmp(query->function, dp->function))
continue;
/* match against the format */
- if (query->format != NULL &&
- strstr(dp->format, query->format) == NULL)
+ if (query->format &&
+ !strstr(dp->format, query->format))
continue;
/* match against the line number range */
@@ -151,13 +180,9 @@
if (newflags == dp->flags)
continue;
dp->flags = newflags;
- if (newflags)
- dp->enabled = 1;
- else
- dp->enabled = 0;
if (verbose)
- pr_info("changed %s:%d [%s]%s %s\n",
- dp->filename, dp->lineno,
+ pr_info("changed %s:%d [%s]%s =%s\n",
+ trim_prefix(dp->filename), dp->lineno,
dt->mod_name, dp->function,
ddebug_describe_flags(dp, flagbuf,
sizeof(flagbuf)));
@@ -167,6 +192,8 @@
if (!nfound && verbose)
pr_info("no matches for query\n");
+
+ return nfound;
}
/*
@@ -186,8 +213,10 @@
buf = skip_spaces(buf);
if (!*buf)
break; /* oh, it was trailing whitespace */
+ if (*buf == '#')
+ break; /* token starts comment, skip rest of line */
- /* Run `end' over a word, either whitespace separated or quoted */
+ /* find `end' of word, whitespace separated or quoted */
if (*buf == '"' || *buf == '\'') {
int quote = *buf++;
for (end = buf ; *end && *end != quote ; end++)
@@ -199,8 +228,8 @@
;
BUG_ON(end == buf);
}
- /* Here `buf' is the start of the word, `end' is one past the end */
+ /* `buf' is start of word, `end' is one past its end */
if (nwords == maxwords)
return -EINVAL; /* ran out of words[] before bytes */
if (*end)
@@ -279,6 +308,19 @@
return str;
}
+static int check_set(const char **dest, char *src, char *name)
+{
+ int rc = 0;
+
+ if (*dest) {
+ rc = -EINVAL;
+ pr_err("match-spec:%s val:%s overridden by %s",
+ name, *dest, src);
+ }
+ *dest = src;
+ return rc;
+}
+
/*
* Parse words[] as a ddebug query specification, which is a series
* of (keyword, value) pairs chosen from these possibilities:
@@ -290,11 +332,15 @@
* format <escaped-string-to-find-in-format>
* line <lineno>
* line <first-lineno>-<last-lineno> // where either may be empty
+ *
+ * Only 1 of each type is allowed.
+ * Returns 0 on success, <0 on error.
*/
static int ddebug_parse_query(char *words[], int nwords,
struct ddebug_query *query)
{
unsigned int i;
+ int rc;
/* check we have an even number of words */
if (nwords % 2 != 0)
@@ -303,41 +349,43 @@
for (i = 0 ; i < nwords ; i += 2) {
if (!strcmp(words[i], "func"))
- query->function = words[i+1];
+ rc = check_set(&query->function, words[i+1], "func");
else if (!strcmp(words[i], "file"))
- query->filename = words[i+1];
+ rc = check_set(&query->filename, words[i+1], "file");
else if (!strcmp(words[i], "module"))
- query->module = words[i+1];
+ rc = check_set(&query->module, words[i+1], "module");
else if (!strcmp(words[i], "format"))
- query->format = unescape(words[i+1]);
+ rc = check_set(&query->format, unescape(words[i+1]),
+ "format");
else if (!strcmp(words[i], "line")) {
char *first = words[i+1];
char *last = strchr(first, '-');
+ if (query->first_lineno || query->last_lineno) {
+ pr_err("match-spec:line given 2 times\n");
+ return -EINVAL;
+ }
if (last)
*last++ = '\0';
if (parse_lineno(first, &query->first_lineno) < 0)
return -EINVAL;
- if (last != NULL) {
+ if (last) {
/* range <first>-<last> */
- if (parse_lineno(last, &query->last_lineno) < 0)
+ if (parse_lineno(last, &query->last_lineno)
+ < query->first_lineno) {
+ pr_err("last-line < 1st-line\n");
return -EINVAL;
+ }
} else {
query->last_lineno = query->first_lineno;
}
} else {
- if (verbose)
- pr_err("unknown keyword \"%s\"\n", words[i]);
+ pr_err("unknown keyword \"%s\"\n", words[i]);
return -EINVAL;
}
+ if (rc)
+ return rc;
}
-
- if (verbose)
- pr_info("q->function=\"%s\" q->filename=\"%s\" "
- "q->module=\"%s\" q->format=\"%s\" q->lineno=%u-%u\n",
- query->function, query->filename,
- query->module, query->format, query->first_lineno,
- query->last_lineno);
-
+ vpr_info_dq(query, "parsed");
return 0;
}
@@ -375,8 +423,6 @@
if (i < 0)
return -EINVAL;
}
- if (flags == 0)
- return -EINVAL;
if (verbose)
pr_info("flags=0x%x\n", flags);
@@ -405,7 +451,7 @@
unsigned int flags = 0, mask = 0;
struct ddebug_query query;
#define MAXWORDS 9
- int nwords;
+ int nwords, nfound;
char *words[MAXWORDS];
nwords = ddebug_tokenize(query_string, words, MAXWORDS);
@@ -417,8 +463,47 @@
return -EINVAL;
/* actually go and implement the change */
- ddebug_change(&query, flags, mask);
- return 0;
+ nfound = ddebug_change(&query, flags, mask);
+ vpr_info_dq((&query), (nfound) ? "applied" : "no-match");
+
+ return nfound;
+}
+
+/* handle multiple queries in query string, continue on error, return
+ last error or number of matching callsites. Module name is either
+ in param (for boot arg) or perhaps in query string.
+*/
+static int ddebug_exec_queries(char *query)
+{
+ char *split;
+ int i, errs = 0, exitcode = 0, rc, nfound = 0;
+
+ for (i = 0; query; query = split) {
+ split = strpbrk(query, ";\n");
+ if (split)
+ *split++ = '\0';
+
+ query = skip_spaces(query);
+ if (!query || !*query || *query == '#')
+ continue;
+
+ if (verbose)
+ pr_info("query %d: \"%s\"\n", i, query);
+
+ rc = ddebug_exec_query(query);
+ if (rc < 0) {
+ errs++;
+ exitcode = rc;
+ } else
+ nfound += rc;
+ i++;
+ }
+ pr_info("processed %d queries, with %d matches, %d errs\n",
+ i, nfound, errs);
+
+ if (exitcode)
+ return exitcode;
+ return nfound;
}
#define PREFIX_SIZE 64
@@ -452,7 +537,8 @@
pos += snprintf(buf + pos, remaining(pos), "%s:",
desc->function);
if (desc->flags & _DPRINTK_FLAGS_INCL_LINENO)
- pos += snprintf(buf + pos, remaining(pos), "%d:", desc->lineno);
+ pos += snprintf(buf + pos, remaining(pos), "%d:",
+ desc->lineno);
if (pos - pos_after_tid)
pos += snprintf(buf + pos, remaining(pos), " ");
if (pos >= PREFIX_SIZE)
@@ -527,14 +613,16 @@
#endif
-static __initdata char ddebug_setup_string[1024];
+#define DDEBUG_STRING_SIZE 1024
+static __initdata char ddebug_setup_string[DDEBUG_STRING_SIZE];
+
static __init int ddebug_setup_query(char *str)
{
- if (strlen(str) >= 1024) {
+ if (strlen(str) >= DDEBUG_STRING_SIZE) {
pr_warn("ddebug boot param string too large\n");
return 0;
}
- strcpy(ddebug_setup_string, str);
+ strlcpy(ddebug_setup_string, str, DDEBUG_STRING_SIZE);
return 1;
}
@@ -544,25 +632,33 @@
* File_ops->write method for <debugfs>/dynamic_debug/conrol. Gathers the
* command text from userspace, parses and executes it.
*/
+#define USER_BUF_PAGE 4096
static ssize_t ddebug_proc_write(struct file *file, const char __user *ubuf,
size_t len, loff_t *offp)
{
- char tmpbuf[256];
+ char *tmpbuf;
int ret;
if (len == 0)
return 0;
- /* we don't check *offp -- multiple writes() are allowed */
- if (len > sizeof(tmpbuf)-1)
+ if (len > USER_BUF_PAGE - 1) {
+ pr_warn("expected <%d bytes into control\n", USER_BUF_PAGE);
return -E2BIG;
- if (copy_from_user(tmpbuf, ubuf, len))
+ }
+ tmpbuf = kmalloc(len + 1, GFP_KERNEL);
+ if (!tmpbuf)
+ return -ENOMEM;
+ if (copy_from_user(tmpbuf, ubuf, len)) {
+ kfree(tmpbuf);
return -EFAULT;
+ }
tmpbuf[len] = '\0';
if (verbose)
pr_info("read %d bytes from userspace\n", (int)len);
- ret = ddebug_exec_query(tmpbuf);
- if (ret)
+ ret = ddebug_exec_queries(tmpbuf);
+ kfree(tmpbuf);
+ if (ret < 0)
return ret;
*offp += len;
@@ -668,7 +764,7 @@
{
struct ddebug_iter *iter = m->private;
struct _ddebug *dp = p;
- char flagsbuf[8];
+ char flagsbuf[10];
if (verbose)
pr_info("called m=%p p=%p\n", m, p);
@@ -679,10 +775,10 @@
return 0;
}
- seq_printf(m, "%s:%u [%s]%s %s \"",
- dp->filename, dp->lineno,
- iter->table->mod_name, dp->function,
- ddebug_describe_flags(dp, flagsbuf, sizeof(flagsbuf)));
+ seq_printf(m, "%s:%u [%s]%s =%s \"",
+ trim_prefix(dp->filename), dp->lineno,
+ iter->table->mod_name, dp->function,
+ ddebug_describe_flags(dp, flagsbuf, sizeof(flagsbuf)));
seq_escape(m, dp->format, "\t\r\n\"");
seq_puts(m, "\"\n");
@@ -708,10 +804,11 @@
};
/*
- * File_ops->open method for <debugfs>/dynamic_debug/control. Does the seq_file
- * setup dance, and also creates an iterator to walk the _ddebugs.
- * Note that we create a seq_file always, even for O_WRONLY files
- * where it's not needed, as doing so simplifies the ->release method.
+ * File_ops->open method for <debugfs>/dynamic_debug/control. Does
+ * the seq_file setup dance, and also creates an iterator to walk the
+ * _ddebugs. Note that we create a seq_file always, even for O_WRONLY
+ * files where it's not needed, as doing so simplifies the ->release
+ * method.
*/
static int ddebug_proc_open(struct inode *inode, struct file *file)
{
@@ -846,33 +943,40 @@
int ret = 0;
int n = 0;
- if (__start___verbose != __stop___verbose) {
- iter = __start___verbose;
- modname = iter->modname;
- iter_start = iter;
- for (; iter < __stop___verbose; iter++) {
- if (strcmp(modname, iter->modname)) {
- ret = ddebug_add_module(iter_start, n, modname);
- if (ret)
- goto out_free;
- n = 0;
- modname = iter->modname;
- iter_start = iter;
- }
- n++;
- }
- ret = ddebug_add_module(iter_start, n, modname);
+ if (__start___verbose == __stop___verbose) {
+ pr_warn("_ddebug table is empty in a "
+ "CONFIG_DYNAMIC_DEBUG build");
+ return 1;
}
+ iter = __start___verbose;
+ modname = iter->modname;
+ iter_start = iter;
+ for (; iter < __stop___verbose; iter++) {
+ if (strcmp(modname, iter->modname)) {
+ ret = ddebug_add_module(iter_start, n, modname);
+ if (ret)
+ goto out_free;
+ n = 0;
+ modname = iter->modname;
+ iter_start = iter;
+ }
+ n++;
+ }
+ ret = ddebug_add_module(iter_start, n, modname);
+ if (ret)
+ goto out_free;
/* ddebug_query boot param got passed -> set it up */
if (ddebug_setup_string[0] != '\0') {
- ret = ddebug_exec_query(ddebug_setup_string);
- if (ret)
+ ret = ddebug_exec_queries(ddebug_setup_string);
+ if (ret < 0)
pr_warn("Invalid ddebug boot param %s",
ddebug_setup_string);
else
- pr_info("ddebug initialized with string %s",
- ddebug_setup_string);
+ pr_info("%d changes by ddebug_query\n", ret);
+
+ /* keep tables even on ddebug_query parse error */
+ ret = 0;
}
out_free:
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index b89efe6..71839eb 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -1029,6 +1029,30 @@
}
ADD_TO_DEVTABLE("amba", struct amba_id, do_amba_entry);
+/* LOOKS like x86cpu:vendor:VVVV:family:FFFF:model:MMMM:feature:*,FEAT,*
+ * All fields are numbers. It would be nicer to use strings for vendor
+ * and feature, but getting those out of the build system here is too
+ * complicated.
+ */
+
+static int do_x86cpu_entry(const char *filename, struct x86_cpu_id *id,
+ char *alias)
+{
+ id->feature = TO_NATIVE(id->feature);
+ id->family = TO_NATIVE(id->family);
+ id->model = TO_NATIVE(id->model);
+ id->vendor = TO_NATIVE(id->vendor);
+
+ strcpy(alias, "x86cpu:");
+ ADD(alias, "vendor:", id->vendor != X86_VENDOR_ANY, id->vendor);
+ ADD(alias, ":family:", id->family != X86_FAMILY_ANY, id->family);
+ ADD(alias, ":model:", id->model != X86_MODEL_ANY, id->model);
+ ADD(alias, ":feature:*,", id->feature != X86_FEATURE_ANY, id->feature);
+ strcat(alias, ",*");
+ return 1;
+}
+ADD_TO_DEVTABLE("x86cpu", struct x86_cpu_id, do_x86cpu_entry);
+
/* Does namelen bytes of name exactly match the symbol? */
static bool sym_is(const char *name, unsigned namelen, const char *symbol)
{
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index 11224ed..4ebf703 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -34,21 +34,12 @@
#include <errno.h>
#include <arpa/inet.h>
#include <linux/connector.h>
+#include <linux/hyperv.h>
#include <linux/netlink.h>
#include <ifaddrs.h>
#include <netdb.h>
#include <syslog.h>
-/*
- * KYS: TODO. Need to register these in the kernel.
- *
- * The following definitions are shared with the in-kernel component; do not
- * change any of this without making the corresponding changes in
- * the KVP kernel component.
- */
-#define CN_KVP_IDX 0x9 /* MSFT KVP functionality */
-#define CN_KVP_VAL 0x1 /* This supports queries from the kernel */
-#define CN_KVP_USER_VAL 0x2 /* This supports queries from the user */
/*
* KVP protocol: The user mode component first registers with the
@@ -60,25 +51,8 @@
* We use this infrastructure for also supporting queries from user mode
* application for state that may be maintained in the KVP kernel component.
*
- * XXXKYS: Have a shared header file between the user and kernel (TODO)
*/
-enum kvp_op {
- KVP_REGISTER = 0, /* Register the user mode component*/
- KVP_KERNEL_GET, /*Kernel is requesting the value for the specified key*/
- KVP_KERNEL_SET, /*Kernel is providing the value for the specified key*/
- KVP_USER_GET, /*User is requesting the value for the specified key*/
- KVP_USER_SET /*User is providing the value for the specified key*/
-};
-
-#define HV_KVP_EXCHANGE_MAX_KEY_SIZE 512
-#define HV_KVP_EXCHANGE_MAX_VALUE_SIZE 2048
-
-struct hv_ku_msg {
- __u32 kvp_index;
- __u8 kvp_key[HV_KVP_EXCHANGE_MAX_KEY_SIZE]; /* Key name */
- __u8 kvp_value[HV_KVP_EXCHANGE_MAX_VALUE_SIZE]; /* Key value */
-};
enum key_index {
FullyQualifiedDomainName = 0,
@@ -93,10 +67,6 @@
ProcessorArchitecture
};
-/*
- * End of shared definitions.
- */
-
static char kvp_send_buffer[4096];
static char kvp_recv_buffer[4096];
static struct sockaddr_nl addr;
@@ -332,7 +302,7 @@
struct pollfd pfd;
struct nlmsghdr *incoming_msg;
struct cn_msg *incoming_cn_msg;
- struct hv_ku_msg *hv_msg;
+ struct hv_kvp_msg *hv_msg;
char *p;
char *key_value;
char *key_name;
@@ -370,9 +340,11 @@
message = (struct cn_msg *)kvp_send_buffer;
message->id.idx = CN_KVP_IDX;
message->id.val = CN_KVP_VAL;
- message->seq = KVP_REGISTER;
+
+ hv_msg = (struct hv_kvp_msg *)message->data;
+ hv_msg->kvp_hdr.operation = KVP_OP_REGISTER;
message->ack = 0;
- message->len = 0;
+ message->len = sizeof(struct hv_kvp_msg);
len = netlink_send(fd, message);
if (len < 0) {
@@ -398,14 +370,15 @@
incoming_msg = (struct nlmsghdr *)kvp_recv_buffer;
incoming_cn_msg = (struct cn_msg *)NLMSG_DATA(incoming_msg);
+ hv_msg = (struct hv_kvp_msg *)incoming_cn_msg->data;
- switch (incoming_cn_msg->seq) {
- case KVP_REGISTER:
+ switch (hv_msg->kvp_hdr.operation) {
+ case KVP_OP_REGISTER:
/*
* Driver is registering with us; stash away the version
* information.
*/
- p = (char *)incoming_cn_msg->data;
+ p = (char *)hv_msg->body.kvp_version;
lic_version = malloc(strlen(p) + 1);
if (lic_version) {
strcpy(lic_version, p);
@@ -416,17 +389,15 @@
}
continue;
- case KVP_KERNEL_GET:
- break;
default:
- continue;
+ break;
}
- hv_msg = (struct hv_ku_msg *)incoming_cn_msg->data;
- key_name = (char *)hv_msg->kvp_key;
- key_value = (char *)hv_msg->kvp_value;
+ hv_msg = (struct hv_kvp_msg *)incoming_cn_msg->data;
+ key_name = (char *)hv_msg->body.kvp_enum_data.data.key;
+ key_value = (char *)hv_msg->body.kvp_enum_data.data.value;
- switch (hv_msg->kvp_index) {
+ switch (hv_msg->body.kvp_enum_data.index) {
case FullyQualifiedDomainName:
kvp_get_domain_name(key_value,
HV_KVP_EXCHANGE_MAX_VALUE_SIZE);
@@ -486,9 +457,8 @@
incoming_cn_msg->id.idx = CN_KVP_IDX;
incoming_cn_msg->id.val = CN_KVP_VAL;
- incoming_cn_msg->seq = KVP_USER_SET;
incoming_cn_msg->ack = 0;
- incoming_cn_msg->len = sizeof(struct hv_ku_msg);
+ incoming_cn_msg->len = sizeof(struct hv_kvp_msg);
len = netlink_send(fd, incoming_cn_msg);
if (len < 0) {