Merge branch 'next-s3c24xx' into for-next
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 11bb0f0..e5a68ea 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -152,8 +152,8 @@
#define IRQ_S3C2416_HSMMC0 S3C2410_IRQ(21) /* S3C2416/S3C2450 */
-#define IRQ_HSMMC0 IRQ_S3C2443_HSMMC
-#define IRQ_HSMMC1 IRQ_S3C2416_HSMMC0
+#define IRQ_HSMMC0 IRQ_S3C2416_HSMMC0
+#define IRQ_HSMMC1 IRQ_S3C2443_HSMMC
#define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14)
#define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15)
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index cd3983a..25bbf5a 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -112,8 +112,8 @@
#define S3C_PA_IIC S3C2410_PA_IIC
#define S3C_PA_UART S3C24XX_PA_UART
#define S3C_PA_USBHOST S3C2410_PA_USBHOST
-#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC
-#define S3C_PA_HSMMC1 S3C2416_PA_HSMMC0
+#define S3C_PA_HSMMC0 S3C2416_PA_HSMMC0
+#define S3C_PA_HSMMC1 S3C2443_PA_HSMMC
#define S3C_PA_WDT S3C2410_PA_WATCHDOG
#define S3C_PA_NAND S3C24XX_PA_NAND
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
index 101aeea..44494a5 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h
@@ -86,6 +86,7 @@
#define S3C2443_HCLKCON_LCDC (1<<9)
#define S3C2443_HCLKCON_USBH (1<<11)
#define S3C2443_HCLKCON_USBD (1<<12)
+#define S3C2416_HCLKCON_HSMMC0 (1<<15)
#define S3C2443_HCLKCON_HSMMC (1<<16)
#define S3C2443_HCLKCON_CFC (1<<17)
#define S3C2443_HCLKCON_SSMC (1<<18)
diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig
index df8d149..69b48a7 100644
--- a/arch/arm/mach-s3c2416/Kconfig
+++ b/arch/arm/mach-s3c2416/Kconfig
@@ -31,6 +31,17 @@
help
Internal config node to apply S3C2416 power management
+config S3C2416_SETUP_SDHCI
+ bool
+ select S3C2416_SETUP_SDHCI_GPIO
+ help
+ Internal helper functions for S3C2416 based SDHCI systems
+
+config S3C2416_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for SDHCI gpio.
+
menu "S3C2416 Machines"
config MACH_SMDK2416
@@ -42,6 +53,7 @@
select S3C_DEV_HSMMC1
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
+ select S3C2416_SETUP_SDHCI
select S3C2416_PM if PM
help
Say Y here if you are using an SMDK2416
diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile
index ef038d6..7b805b2 100644
--- a/arch/arm/mach-s3c2416/Makefile
+++ b/arch/arm/mach-s3c2416/Makefile
@@ -14,6 +14,10 @@
obj-$(CONFIG_S3C2416_PM) += pm.o
#obj-$(CONFIG_S3C2416_DMA) += dma.o
+# Device setup
+obj-$(CONFIG_S3C2416_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+
# Machine support
obj-$(CONFIG_MACH_SMDK2416) += mach-smdk2416.o
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index 7ccf5a2..3b02d85 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -38,12 +38,11 @@
[7] = 8,
};
-/* ID to hardware numbering, 0 is HSMMC1, 1 is HSMMC0 */
static struct clksrc_clk hsmmc_div[] = {
[0] = {
.clk = {
.name = "hsmmc-div",
- .id = 1,
+ .id = 0,
.parent = &clk_esysclk.clk,
},
.reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
@@ -51,7 +50,7 @@
[1] = {
.clk = {
.name = "hsmmc-div",
- .id = 0,
+ .id = 1,
.parent = &clk_esysclk.clk,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
@@ -61,7 +60,7 @@
static struct clksrc_clk hsmmc_mux[] = {
[0] = {
.clk = {
- .id = 1,
+ .id = 0,
.name = "hsmmc-if",
.ctrlbit = (1 << 6),
.enable = s3c2443_clkcon_enable_s,
@@ -77,7 +76,7 @@
},
[1] = {
.clk = {
- .id = 0,
+ .id = 1,
.name = "hsmmc-if",
.ctrlbit = (1 << 12),
.enable = s3c2443_clkcon_enable_s,
@@ -93,6 +92,13 @@
},
};
+static struct clk hsmmc0_clk = {
+ .name = "hsmmc",
+ .id = 0,
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2416_HCLKCON_HSMMC0,
+};
static inline unsigned int s3c2416_fclk_div(unsigned long clkcon0)
{
@@ -130,6 +136,8 @@
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_register_clksrc(clksrcs[ptr], 1);
+ s3c24xx_register_clock(&hsmmc0_clk);
+
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index 7fc3664..3f83177 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -46,6 +46,7 @@
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/nand.h>
+#include <plat/sdhci.h>
#include <plat/regs-fb-v4.h>
#include <plat/fb.h>
@@ -110,6 +111,13 @@
.ucon = UCON,
.ulcon = ULCON | 0x50,
.ufcon = UFCON,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
}
};
@@ -159,6 +167,18 @@
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
};
+static struct s3c_sdhci_platdata smdk2416_hsmmc0_pdata __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_GPIO,
+ .ext_cd_gpio = S3C2410_GPF(1),
+ .ext_cd_gpio_invert = 1,
+};
+
+static struct s3c_sdhci_platdata smdk2416_hsmmc1_pdata __initdata = {
+ .max_width = 4,
+ .cd_type = S3C_SDHCI_CD_NONE,
+};
+
static struct platform_device *smdk2416_devices[] __initdata = {
&s3c_device_fb,
&s3c_device_wdt,
@@ -180,6 +200,9 @@
s3c_i2c0_set_platdata(NULL);
s3c_fb_set_platdata(&smdk2416_fb_platdata);
+ s3c_sdhci0_set_platdata(&smdk2416_hsmmc0_pdata);
+ s3c_sdhci1_set_platdata(&smdk2416_hsmmc1_pdata);
+
gpio_request(S3C2410_GPB(4), "USBHost Power");
gpio_direction_output(S3C2410_GPB(4), 1);
diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c
index 63f39cd..ba7fd87 100644
--- a/arch/arm/mach-s3c2416/s3c2416.c
+++ b/arch/arm/mach-s3c2416/s3c2416.c
@@ -53,6 +53,7 @@
#include <plat/s3c2416.h>
#include <plat/devs.h>
#include <plat/cpu.h>
+#include <plat/sdhci.h>
#include <plat/iic-core.h>
#include <plat/fb-core.h>
@@ -115,6 +116,10 @@
s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown;
s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown;
+ /* initialize device information early */
+ s3c2416_default_sdhci0();
+ s3c2416_default_sdhci1();
+
iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
}
diff --git a/arch/arm/mach-s3c2416/setup-sdhci-gpio.c b/arch/arm/mach-s3c2416/setup-sdhci-gpio.c
new file mode 100644
index 0000000..f65cb3e
--- /dev/null
+++ b/arch/arm/mach-s3c2416/setup-sdhci-gpio.c
@@ -0,0 +1,34 @@
+/* linux/arch/arm/plat-s3c2416/setup-sdhci-gpio.c
+ *
+ * Copyright 2010 Promwad Innovation Company
+ * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * S3C2416 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * Based on mach-s3c64xx/setup-sdhci-gpio.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-gpio.h>
+#include <plat/gpio-cfg.h>
+
+void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ s3c_gpio_cfgrange_nopull(S3C2410_GPE(5), 2 + width, S3C_GPIO_SFN(2));
+}
+
+void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ s3c_gpio_cfgrange_nopull(S3C2410_GPL(0), width, S3C_GPIO_SFN(2));
+ s3c_gpio_cfgrange_nopull(S3C2410_GPL(8), 2, S3C_GPIO_SFN(2));
+}
diff --git a/arch/arm/mach-s3c2416/setup-sdhci.c b/arch/arm/mach-s3c2416/setup-sdhci.c
new file mode 100644
index 0000000..ed34fad
--- /dev/null
+++ b/arch/arm/mach-s3c2416/setup-sdhci.c
@@ -0,0 +1,61 @@
+/* linux/arch/arm/mach-s3c2416/setup-sdhci.c
+ *
+ * Copyright 2010 Promwad Innovation Company
+ * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
+ *
+ * S3C2416 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * Based on mach-s3c64xx/setup-sdhci.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c2416_hsmmc_clksrcs[4] = {
+ [0] = "hsmmc",
+ [1] = "hsmmc",
+ [2] = "hsmmc-if",
+ /* [3] = "48m", - note not successfully used yet */
+};
+
+void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card)
+{
+ u32 ctrl2, ctrl3;
+
+ ctrl2 = __raw_readl(r + S3C_SDHCI_CONTROL2);
+ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+ ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+ S3C_SDHCI_CTRL2_ENFBCLKRX |
+ S3C_SDHCI_CTRL2_DFCNT_NONE |
+ S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+ if (ios->clock < 25 * 1000000)
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+ S3C_SDHCI_CTRL3_FCSEL2 |
+ S3C_SDHCI_CTRL3_FCSEL1 |
+ S3C_SDHCI_CTRL3_FCSEL0);
+ else
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+ __raw_writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+ __raw_writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 31babec..d8eb868 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -10,6 +10,7 @@
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
select S3C2443_CLOCK
+ select S3C_GPIO_PULL_S3C2443
help
Support for the S3C2443 SoC from the S3C24XX line
@@ -25,7 +26,7 @@
bool "SMDK2443"
select CPU_S3C2443
select MACH_SMDK
- select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
help
Say Y here if you are using an SMDK2443
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index 0c3c0c8..f4ec6d5 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -196,7 +196,7 @@
static struct clksrc_clk clk_hsmmc_div = {
.clk = {
.name = "hsmmc-div",
- .id = -1,
+ .id = 1,
.parent = &clk_esysclk.clk,
},
.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
@@ -231,7 +231,7 @@
static struct clk clk_hsmmc = {
.name = "hsmmc-if",
- .id = -1,
+ .id = 1,
.parent = &clk_hsmmc_div.clk,
.enable = s3c2443_enable_hsmmc,
.ops = &(struct clk_ops) {
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 4337f0a..514275e 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -99,13 +99,20 @@
.ucon = 0x3c5,
.ulcon = 0x43,
.ufcon = 0x51,
+ },
+ [3] = {
+ .hwport = 3,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
}
};
static struct platform_device *smdk2443_devices[] __initdata = {
&s3c_device_wdt,
&s3c_device_i2c0,
- &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
#ifdef CONFIG_SND_SOC_SMDK2443_WM9710
&s3c_device_ac97,
#endif
diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c
index 33d18dd..e6a28ba 100644
--- a/arch/arm/mach-s3c2443/s3c2443.c
+++ b/arch/arm/mach-s3c2443/s3c2443.c
@@ -16,6 +16,7 @@
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/sysdev.h>
@@ -32,6 +33,9 @@
#include <mach/regs-s3c2443-clock.h>
#include <mach/reset.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
#include <plat/s3c2443.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -86,6 +90,9 @@
void __init s3c2443_map_io(void)
{
+ s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443;
+ s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443;
+
iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
}
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 2f91057..10ce666 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -194,7 +194,6 @@
memcpy(&s3c2410ts_info, hard_s3c2410ts_info, sizeof(struct s3c2410_ts_mach_info));
s3c_device_ts.dev.platform_data = &s3c2410ts_info;
}
-EXPORT_SYMBOL(s3c24xx_ts_set_platdata);
/* USB Device (Gadget)*/
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 461f070..82f2d4a 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -271,7 +271,7 @@
.ctrlbit = S3C2443_HCLKCON_DMA5,
}, {
.name = "hsmmc",
- .id = 0,
+ .id = 1,
.parent = &clk_h,
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_HSMMC,
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 2ebf415..32be05c 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -95,6 +95,12 @@
help
Internal configuration to enable the correct GPIO pull helper
+config S3C_GPIO_PULL_S3C2443
+ bool
+ select S3C_GPIO_PULL_UPDOWN
+ help
+ Internal configuration to enable the correct GPIO pull helper for S3C2443-style GPIO
+
config S3C_GPIO_PULL_DOWN
bool
help
diff --git a/arch/arm/plat-samsung/dev-nand.c b/arch/arm/plat-samsung/dev-nand.c
index 3a7b8891..6927ae8 100644
--- a/arch/arm/plat-samsung/dev-nand.c
+++ b/arch/arm/plat-samsung/dev-nand.c
@@ -126,5 +126,3 @@
s3c_device_nand.dev.platform_data = npd;
}
-
-EXPORT_SYMBOL_GPL(s3c_nand_set_platdata);
diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c
index 0aa32f2..1c0b040 100644
--- a/arch/arm/plat-samsung/gpio-config.c
+++ b/arch/arm/plat-samsung/gpio-config.c
@@ -278,6 +278,48 @@
pup &= 0x3;
return (__force s3c_gpio_pull_t)pup;
}
+
+#ifdef CONFIG_S3C_GPIO_PULL_S3C2443
+int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull)
+{
+ switch (pull) {
+ case S3C_GPIO_PULL_NONE:
+ pull = 0x01;
+ break;
+ case S3C_GPIO_PULL_UP:
+ pull = 0x00;
+ break;
+ case S3C_GPIO_PULL_DOWN:
+ pull = 0x02;
+ break;
+ }
+ return s3c_gpio_setpull_updown(chip, off, pull);
+}
+
+s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
+ unsigned int off)
+{
+ s3c_gpio_pull_t pull;
+
+ pull = s3c_gpio_getpull_updown(chip, off);
+
+ switch (pull) {
+ case 0x00:
+ pull = S3C_GPIO_PULL_UP;
+ break;
+ case 0x01:
+ case 0x03:
+ pull = S3C_GPIO_PULL_NONE;
+ break;
+ case 0x02:
+ pull = S3C_GPIO_PULL_DOWN;
+ break;
+ }
+
+ return pull;
+}
+#endif
#endif
#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 0d2c570..5603db0 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -244,7 +244,7 @@
* This helper function reads the state of the pull-{up,down} resistor for the
* given GPIO in the same case as s3c_gpio_setpull_upown.
*/
-extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip,
+extern s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip,
unsigned int off);
#endif /* __PLAT_GPIO_CFG_HELPERS_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 85853f8..5a41a0b 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -107,6 +107,8 @@
/* Helper function availablity */
+extern void s3c2416_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c2416_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
@@ -122,6 +124,39 @@
extern void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
+/* S3C2416 SDHCI setup */
+
+#ifdef CONFIG_S3C2416_SETUP_SDHCI
+extern char *s3c2416_hsmmc_clksrcs[4];
+
+extern void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card);
+
+static inline void s3c2416_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+ s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
+ s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
+ s3c_hsmmc0_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
+#endif /* CONFIG_S3C_DEV_HSMMC */
+}
+
+static inline void s3c2416_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+ s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
+ s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
+ s3c_hsmmc1_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+}
+
+#else
+static inline void s3c2416_default_sdhci0(void) { }
+static inline void s3c2416_default_sdhci1(void) { }
+
+#endif /* CONFIG_S3C2416_SETUP_SDHCI */
/* S3C64XX SDHCI setup */
#ifdef CONFIG_S3C64XX_SETUP_SDHCI