drm/i915: Convert intel_dp to use atomic state
Slightly less straightforward. Some of the drrs calls are done from
workers or from intel_ddi.c, pass along crtc_state when we can,
or crtc->config when we can't.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470755054-32699-15-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index b238728..309ba7b 100644
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -1745,7 +1745,7 @@
intel_edp_backlight_on(intel_dp);
intel_psr_enable(intel_dp);
- intel_edp_drrs_enable(intel_dp);
+ intel_edp_drrs_enable(intel_dp, pipe_config);
}
if (intel_crtc->config->has_audio) {
@@ -1773,7 +1773,7 @@
if (type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
- intel_edp_drrs_disable(intel_dp);
+ intel_edp_drrs_disable(intel_dp, old_crtc_state);
intel_psr_disable(intel_dp);
intel_edp_backlight_off(intel_dp);
}
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 9bf71f5..f3e17cd 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1648,16 +1648,17 @@
intel_dp->link_mst = intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DP_MST);
}
-static void intel_dp_prepare(struct intel_encoder *encoder)
+static void intel_dp_prepare(struct intel_encoder *encoder,
+ struct intel_crtc_state *pipe_config)
{
struct drm_device *dev = encoder->base.dev;
struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
enum port port = dp_to_dig_port(intel_dp)->port;
struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
- const struct drm_display_mode *adjusted_mode = &crtc->config->base.adjusted_mode;
+ const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
- intel_dp_set_link_params(intel_dp, crtc->config);
+ intel_dp_set_link_params(intel_dp, pipe_config);
/*
* There are four kinds of DP registers:
@@ -1683,7 +1684,7 @@
/* Handle DP bits in common between all three register formats */
intel_dp->DP |= DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0;
- intel_dp->DP |= DP_PORT_WIDTH(crtc->config->lane_count);
+ intel_dp->DP |= DP_PORT_WIDTH(pipe_config->lane_count);
/* Split out the IBX/CPU vs CPT settings */
@@ -1711,7 +1712,7 @@
I915_WRITE(TRANS_DP_CTL(crtc->pipe), trans_dp);
} else {
if (!HAS_PCH_SPLIT(dev) && !IS_VALLEYVIEW(dev) &&
- !IS_CHERRYVIEW(dev) && crtc->config->limited_color_range)
+ !IS_CHERRYVIEW(dev) && pipe_config->limited_color_range)
intel_dp->DP |= DP_COLOR_RANGE_16_235;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
@@ -2250,10 +2251,10 @@
#define assert_edp_pll_enabled(d) assert_edp_pll((d), true)
#define assert_edp_pll_disabled(d) assert_edp_pll((d), false)
-static void ironlake_edp_pll_on(struct intel_dp *intel_dp)
+static void ironlake_edp_pll_on(struct intel_dp *intel_dp,
+ struct intel_crtc_state *pipe_config)
{
- struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
- struct intel_crtc *crtc = to_intel_crtc(intel_dig_port->base.base.crtc);
+ struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
assert_pipe_disabled(dev_priv, crtc->pipe);
@@ -2261,11 +2262,11 @@
assert_edp_pll_disabled(dev_priv);
DRM_DEBUG_KMS("enabling eDP PLL for clock %d\n",
- crtc->config->port_clock);
+ pipe_config->port_clock);
intel_dp->DP &= ~DP_PLL_FREQ_MASK;
- if (crtc->config->port_clock == 162000)
+ if (pipe_config->port_clock == 162000)
intel_dp->DP |= DP_PLL_FREQ_162MHZ;
else
intel_dp->DP |= DP_PLL_FREQ_270MHZ;
@@ -2479,13 +2480,12 @@
struct drm_connector_state *old_conn_state)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
- struct drm_device *dev = encoder->base.dev;
- struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
+ struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
- if (crtc->config->has_audio)
+ if (old_crtc_state->has_audio)
intel_audio_codec_disable(encoder);
- if (HAS_PSR(dev) && !HAS_DDI(dev))
+ if (HAS_PSR(dev_priv) && !HAS_DDI(dev_priv))
intel_psr_disable(intel_dp);
/* Make sure the panel is off before trying to change the mode. But also
@@ -2496,7 +2496,7 @@
intel_edp_panel_off(intel_dp);
/* disable the port before the pipe on g4x */
- if (INTEL_INFO(dev)->gen < 5)
+ if (INTEL_GEN(dev_priv) < 5)
intel_dp_link_down(intel_dp);
}
@@ -2625,12 +2625,11 @@
}
}
-static void intel_dp_enable_port(struct intel_dp *intel_dp)
+static void intel_dp_enable_port(struct intel_dp *intel_dp,
+ struct intel_crtc_state *old_crtc_state)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = to_i915(dev);
- struct intel_crtc *crtc =
- to_intel_crtc(dp_to_dig_port(intel_dp)->base.base.crtc);
/* enable with pattern 1 (as per spec) */
_intel_dp_set_link_train(intel_dp, &intel_dp->DP,
@@ -2646,14 +2645,15 @@
* fail when the power sequencer is freshly used for this port.
*/
intel_dp->DP |= DP_PORT_EN;
- if (crtc->config->has_audio)
+ if (old_crtc_state->has_audio)
intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE;
I915_WRITE(intel_dp->output_reg, intel_dp->DP);
POSTING_READ(intel_dp->output_reg);
}
-static void intel_enable_dp(struct intel_encoder *encoder)
+static void intel_enable_dp(struct intel_encoder *encoder,
+ struct intel_crtc_state *pipe_config)
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
struct drm_device *dev = encoder->base.dev;
@@ -2670,7 +2670,7 @@
if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
vlv_init_panel_power_sequencer(intel_dp);
- intel_dp_enable_port(intel_dp);
+ intel_dp_enable_port(intel_dp, pipe_config);
edp_panel_vdd_on(intel_dp);
edp_panel_on(intel_dp);
@@ -2682,7 +2682,7 @@
unsigned int lane_mask = 0x0;
if (IS_CHERRYVIEW(dev))
- lane_mask = intel_dp_unused_lane_mask(crtc->config->lane_count);
+ lane_mask = intel_dp_unused_lane_mask(pipe_config->lane_count);
vlv_wait_port_ready(dev_priv, dp_to_dig_port(intel_dp),
lane_mask);
@@ -2692,7 +2692,7 @@
intel_dp_start_link_train(intel_dp);
intel_dp_stop_link_train(intel_dp);
- if (crtc->config->has_audio) {
+ if (pipe_config->has_audio) {
DRM_DEBUG_DRIVER("Enabling DP audio on pipe %c\n",
pipe_name(pipe));
intel_audio_codec_enable(encoder);
@@ -2705,7 +2705,7 @@
{
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
- intel_enable_dp(encoder);
+ intel_enable_dp(encoder, pipe_config);
intel_edp_backlight_on(intel_dp);
}
@@ -2726,11 +2726,11 @@
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
enum port port = dp_to_dig_port(intel_dp)->port;
- intel_dp_prepare(encoder);
+ intel_dp_prepare(encoder, pipe_config);
/* Only ilk+ has port A */
if (port == PORT_A)
- ironlake_edp_pll_on(intel_dp);
+ ironlake_edp_pll_on(intel_dp, pipe_config);
}
static void vlv_detach_power_sequencer(struct intel_dp *intel_dp)
@@ -2842,14 +2842,14 @@
{
vlv_phy_pre_encoder_enable(encoder);
- intel_enable_dp(encoder);
+ intel_enable_dp(encoder, pipe_config);
}
static void vlv_dp_pre_pll_enable(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
{
- intel_dp_prepare(encoder);
+ intel_dp_prepare(encoder, pipe_config);
vlv_phy_pre_pll_enable(encoder);
}
@@ -2860,7 +2860,7 @@
{
chv_phy_pre_encoder_enable(encoder);
- intel_enable_dp(encoder);
+ intel_enable_dp(encoder, pipe_config);
/* Second common lane will stay alive on its own now */
chv_phy_release_cl2_override(encoder);
@@ -2870,7 +2870,7 @@
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
{
- intel_dp_prepare(encoder);
+ intel_dp_prepare(encoder, pipe_config);
chv_phy_pre_pll_enable(encoder);
}
@@ -5057,14 +5057,14 @@
*
* The caller of this function needs to take a lock on dev_priv->drrs.
*/
-static void intel_dp_set_drrs_state(struct drm_device *dev, int refresh_rate)
+static void intel_dp_set_drrs_state(struct drm_i915_private *dev_priv,
+ struct intel_crtc_state *crtc_state,
+ int refresh_rate)
{
- struct drm_i915_private *dev_priv = to_i915(dev);
struct intel_encoder *encoder;
struct intel_digital_port *dig_port = NULL;
struct intel_dp *intel_dp = dev_priv->drrs.dp;
- struct intel_crtc_state *config = NULL;
- struct intel_crtc *intel_crtc = NULL;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
enum drrs_refresh_rate_type index = DRRS_HIGH_RR;
if (refresh_rate <= 0) {
@@ -5091,8 +5091,6 @@
return;
}
- config = intel_crtc->config;
-
if (dev_priv->drrs.type < SEAMLESS_DRRS_SUPPORT) {
DRM_DEBUG_KMS("Only Seamless DRRS supported.\n");
return;
@@ -5108,12 +5106,12 @@
return;
}
- if (!intel_crtc->active) {
+ if (!crtc_state->base.active) {
DRM_DEBUG_KMS("eDP encoder disabled. CRTC not Active\n");
return;
}
- if (INTEL_INFO(dev)->gen >= 8 && !IS_CHERRYVIEW(dev)) {
+ if (INTEL_GEN(dev_priv) >= 8 && !IS_CHERRYVIEW(dev_priv)) {
switch (index) {
case DRRS_HIGH_RR:
intel_dp_set_m_n(intel_crtc, M1_N1);
@@ -5125,18 +5123,18 @@
default:
DRM_ERROR("Unsupported refreshrate type\n");
}
- } else if (INTEL_INFO(dev)->gen > 6) {
- i915_reg_t reg = PIPECONF(intel_crtc->config->cpu_transcoder);
+ } else if (INTEL_GEN(dev_priv) > 6) {
+ i915_reg_t reg = PIPECONF(crtc_state->cpu_transcoder);
u32 val;
val = I915_READ(reg);
if (index > DRRS_HIGH_RR) {
- if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
+ if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
val |= PIPECONF_EDP_RR_MODE_SWITCH_VLV;
else
val |= PIPECONF_EDP_RR_MODE_SWITCH;
} else {
- if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
+ if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
val &= ~PIPECONF_EDP_RR_MODE_SWITCH_VLV;
else
val &= ~PIPECONF_EDP_RR_MODE_SWITCH;
@@ -5155,15 +5153,13 @@
*
* Initializes frontbuffer_bits and drrs.dp
*/
-void intel_edp_drrs_enable(struct intel_dp *intel_dp)
+void intel_edp_drrs_enable(struct intel_dp *intel_dp,
+ struct intel_crtc_state *crtc_state)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = to_i915(dev);
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- struct drm_crtc *crtc = dig_port->base.base.crtc;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- if (!intel_crtc->config->has_drrs) {
+ if (!crtc_state->has_drrs) {
DRM_DEBUG_KMS("Panel doesn't support DRRS\n");
return;
}
@@ -5187,15 +5183,13 @@
* @intel_dp: DP struct
*
*/
-void intel_edp_drrs_disable(struct intel_dp *intel_dp)
+void intel_edp_drrs_disable(struct intel_dp *intel_dp,
+ struct intel_crtc_state *old_crtc_state)
{
struct drm_device *dev = intel_dp_to_dev(intel_dp);
struct drm_i915_private *dev_priv = to_i915(dev);
- struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
- struct drm_crtc *crtc = dig_port->base.base.crtc;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- if (!intel_crtc->config->has_drrs)
+ if (!old_crtc_state->has_drrs)
return;
mutex_lock(&dev_priv->drrs.mutex);
@@ -5205,9 +5199,8 @@
}
if (dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
- intel_dp_set_drrs_state(&dev_priv->drm,
- intel_dp->attached_connector->panel.
- fixed_mode->vrefresh);
+ intel_dp_set_drrs_state(dev_priv, old_crtc_state,
+ intel_dp->attached_connector->panel.fixed_mode->vrefresh);
dev_priv->drrs.dp = NULL;
mutex_unlock(&dev_priv->drrs.mutex);
@@ -5236,10 +5229,12 @@
if (dev_priv->drrs.busy_frontbuffer_bits)
goto unlock;
- if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR)
- intel_dp_set_drrs_state(&dev_priv->drm,
- intel_dp->attached_connector->panel.
- downclock_mode->vrefresh);
+ if (dev_priv->drrs.refresh_rate_type != DRRS_LOW_RR) {
+ struct drm_crtc *crtc = dp_to_dig_port(intel_dp)->base.base.crtc;
+
+ intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
+ intel_dp->attached_connector->panel.downclock_mode->vrefresh);
+ }
unlock:
mutex_unlock(&dev_priv->drrs.mutex);
@@ -5280,9 +5275,8 @@
/* invalidate means busy screen hence upclock */
if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
- intel_dp_set_drrs_state(&dev_priv->drm,
- dev_priv->drrs.dp->attached_connector->panel.
- fixed_mode->vrefresh);
+ intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
+ dev_priv->drrs.dp->attached_connector->panel.fixed_mode->vrefresh);
mutex_unlock(&dev_priv->drrs.mutex);
}
@@ -5324,9 +5318,8 @@
/* flush means busy screen hence upclock */
if (frontbuffer_bits && dev_priv->drrs.refresh_rate_type == DRRS_LOW_RR)
- intel_dp_set_drrs_state(&dev_priv->drm,
- dev_priv->drrs.dp->attached_connector->panel.
- fixed_mode->vrefresh);
+ intel_dp_set_drrs_state(dev_priv, to_intel_crtc(crtc)->config,
+ dev_priv->drrs.dp->attached_connector->panel.fixed_mode->vrefresh);
/*
* flush also means no more activity hence schedule downclock, if all
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 0b72eed..6480c59 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -1409,8 +1409,10 @@
void intel_power_sequencer_reset(struct drm_i915_private *dev_priv);
uint32_t intel_dp_pack_aux(const uint8_t *src, int src_bytes);
void intel_plane_destroy(struct drm_plane *plane);
-void intel_edp_drrs_enable(struct intel_dp *intel_dp);
-void intel_edp_drrs_disable(struct intel_dp *intel_dp);
+void intel_edp_drrs_enable(struct intel_dp *intel_dp,
+ struct intel_crtc_state *crtc_state);
+void intel_edp_drrs_disable(struct intel_dp *intel_dp,
+ struct intel_crtc_state *crtc_state);
void intel_edp_drrs_invalidate(struct drm_i915_private *dev_priv,
unsigned int frontbuffer_bits);
void intel_edp_drrs_flush(struct drm_i915_private *dev_priv,