ASoC: da7219: Improve pop/click performance for sensitive HPs
Currently on some headsets slight pops can be heard during DAPM
power-up/down. This can also be witnessed during the HP detect
procedure. This patch addresses the issue by adjusting DAPM power
sequencing slightly, the introduction of delays and use of
minimum HP gain to avoid such noise artefacts.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c
index 2b8914d..6274d79 100644
--- a/sound/soc/codecs/da7219-aad.c
+++ b/sound/soc/codecs/da7219-aad.c
@@ -204,10 +204,19 @@
snd_soc_update_bits(codec, DA7219_MIXOUT_R_CTRL,
DA7219_MIXOUT_R_AMP_EN_MASK,
DA7219_MIXOUT_R_AMP_EN_MASK);
- snd_soc_write(codec, DA7219_HP_L_CTRL,
- DA7219_HP_L_AMP_OE_MASK | DA7219_HP_L_AMP_EN_MASK);
- snd_soc_write(codec, DA7219_HP_R_CTRL,
- DA7219_HP_R_AMP_OE_MASK | DA7219_HP_R_AMP_EN_MASK);
+ snd_soc_update_bits(codec, DA7219_HP_L_CTRL,
+ DA7219_HP_L_AMP_OE_MASK | DA7219_HP_L_AMP_EN_MASK,
+ DA7219_HP_L_AMP_OE_MASK | DA7219_HP_L_AMP_EN_MASK);
+ snd_soc_update_bits(codec, DA7219_HP_R_CTRL,
+ DA7219_HP_R_AMP_OE_MASK | DA7219_HP_R_AMP_EN_MASK,
+ DA7219_HP_R_AMP_OE_MASK | DA7219_HP_R_AMP_EN_MASK);
+ msleep(DA7219_SETTLING_DELAY);
+ snd_soc_update_bits(codec, DA7219_HP_L_CTRL,
+ DA7219_HP_L_AMP_MUTE_EN_MASK |
+ DA7219_HP_L_AMP_MIN_GAIN_EN_MASK, 0);
+ snd_soc_update_bits(codec, DA7219_HP_R_CTRL,
+ DA7219_HP_R_AMP_MUTE_EN_MASK |
+ DA7219_HP_R_AMP_MIN_GAIN_EN_MASK, 0);
/*
* If we're running from the internal oscillator then give audio paths
@@ -244,6 +253,7 @@
regcache_mark_dirty(da7219->regmap);
regcache_sync_region(da7219->regmap, DA7219_HP_L_CTRL,
DA7219_HP_R_CTRL);
+ msleep(DA7219_SETTLING_DELAY);
regcache_sync_region(da7219->regmap, DA7219_MIXOUT_L_CTRL,
DA7219_MIXOUT_R_CTRL);
regcache_sync_region(da7219->regmap, DA7219_DROUTING_ST_OUTFILT_1L,