| /* |
| * Copyright (C) 2012 STMicroelectronics Limited. |
| * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * publishhed by the Free Software Foundation. |
| */ |
| #include "stih41x.dtsi" |
| #include "stih416-clock.dtsi" |
| #include "stih416-pinctrl.dtsi" |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/reset-controller/stih416-resets.h> |
| / { |
| L2: cache-controller { |
| compatible = "arm,pl310-cache"; |
| reg = <0xfffe2000 0x1000>; |
| arm,data-latency = <3 3 3>; |
| arm,tag-latency = <2 2 2>; |
| cache-unified; |
| cache-level = <2>; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&intc>; |
| ranges; |
| compatible = "simple-bus"; |
| |
| powerdown: powerdown-controller { |
| #reset-cells = <1>; |
| compatible = "st,stih416-powerdown"; |
| }; |
| |
| softreset: softreset-controller { |
| #reset-cells = <1>; |
| compatible = "st,stih416-softreset"; |
| }; |
| |
| syscfg_sbc:sbc-syscfg@fe600000{ |
| compatible = "st,stih416-sbc-syscfg", "syscon"; |
| reg = <0xfe600000 0x1000>; |
| }; |
| |
| syscfg_front:front-syscfg@fee10000{ |
| compatible = "st,stih416-front-syscfg", "syscon"; |
| reg = <0xfee10000 0x1000>; |
| }; |
| |
| syscfg_rear:rear-syscfg@fe830000{ |
| compatible = "st,stih416-rear-syscfg", "syscon"; |
| reg = <0xfe830000 0x1000>; |
| }; |
| |
| /* MPE */ |
| syscfg_fvdp_fe:fvdp-fe-syscfg@fddf0000{ |
| compatible = "st,stih416-fvdp-fe-syscfg", "syscon"; |
| reg = <0xfddf0000 0x1000>; |
| }; |
| |
| syscfg_fvdp_lite:fvdp-lite-syscfg@fd6a0000{ |
| compatible = "st,stih416-fvdp-lite-syscfg", "syscon"; |
| reg = <0xfd6a0000 0x1000>; |
| }; |
| |
| syscfg_cpu:cpu-syscfg@fdde0000{ |
| compatible = "st,stih416-cpu-syscfg", "syscon"; |
| reg = <0xfdde0000 0x1000>; |
| }; |
| |
| syscfg_compo:compo-syscfg@fd320000{ |
| compatible = "st,stih416-compo-syscfg", "syscon"; |
| reg = <0xfd320000 0x1000>; |
| }; |
| |
| syscfg_transport:transport-syscfg@fd690000{ |
| compatible = "st,stih416-transport-syscfg", "syscon"; |
| reg = <0xfd690000 0x1000>; |
| }; |
| |
| syscfg_lpm:lpm-syscfg@fe4b5100{ |
| compatible = "st,stih416-lpm-syscfg", "syscon"; |
| reg = <0xfe4b5100 0x8>; |
| }; |
| |
| serial2: serial@fed32000{ |
| compatible = "st,asc"; |
| status = "disabled"; |
| reg = <0xfed32000 0x2c>; |
| interrupts = <0 197 0>; |
| clocks = <&clk_s_a0_ls CLK_ICN_REG>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_serial2 &pinctrl_serial2_oe>; |
| }; |
| |
| /* SBC_UART1 */ |
| sbc_serial1: serial@fe531000 { |
| compatible = "st,asc"; |
| status = "disabled"; |
| reg = <0xfe531000 0x2c>; |
| interrupts = <0 210 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sbc_serial1>; |
| clocks = <&clk_sysin>; |
| }; |
| |
| i2c@fed40000 { |
| compatible = "st,comms-ssc4-i2c"; |
| reg = <0xfed40000 0x110>; |
| interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_s_a0_ls CLK_ICN_REG>; |
| clock-names = "ssc"; |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c0_default>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c@fed41000 { |
| compatible = "st,comms-ssc4-i2c"; |
| reg = <0xfed41000 0x110>; |
| interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_s_a0_ls CLK_ICN_REG>; |
| clock-names = "ssc"; |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1_default>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c@fe540000 { |
| compatible = "st,comms-ssc4-i2c"; |
| reg = <0xfe540000 0x110>; |
| interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_sysin>; |
| clock-names = "ssc"; |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sbc_i2c0_default>; |
| |
| status = "disabled"; |
| }; |
| |
| i2c@fe541000 { |
| compatible = "st,comms-ssc4-i2c"; |
| reg = <0xfe541000 0x110>; |
| interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk_sysin>; |
| clock-names = "ssc"; |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_sbc_i2c1_default>; |
| |
| status = "disabled"; |
| }; |
| |
| ethernet0: dwmac@fe810000 { |
| device_type = "network"; |
| compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710"; |
| status = "disabled"; |
| reg = <0xfe810000 0x8000>, <0x8bc 0x4>; |
| reg-names = "stmmaceth", "sti-ethconf"; |
| |
| interrupts = <0 133 0>, <0 134 0>, <0 135 0>; |
| interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; |
| |
| snps,pbl = <32>; |
| snps,mixed-burst; |
| |
| st,syscon = <&syscfg_rear>; |
| resets = <&softreset STIH416_ETH0_SOFTRESET>; |
| reset-names = "stmmaceth"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_mii0>; |
| clock-names = "stmmaceth", "sti-ethclk"; |
| clocks = <&clk_s_a1_ls CLK_ICN_IF_2>, <&clk_s_a1_ls CLK_GMAC0_PHY>; |
| }; |
| |
| ethernet1: dwmac@fef08000 { |
| device_type = "network"; |
| compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710"; |
| status = "disabled"; |
| reg = <0xfef08000 0x8000>, <0x7f0 0x4>; |
| reg-names = "stmmaceth", "sti-ethconf"; |
| interrupts = <0 136 0>, <0 137 0>, <0 138 0>; |
| interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; |
| |
| snps,pbl = <32>; |
| snps,mixed-burst; |
| |
| st,syscon = <&syscfg_sbc>; |
| |
| resets = <&softreset STIH416_ETH1_SOFTRESET>; |
| reset-names = "stmmaceth"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_mii1>; |
| clock-names = "stmmaceth", "sti-ethclk"; |
| clocks = <&clk_s_a0_ls CLK_ICN_REG>, <&clk_s_a0_ls CLK_ETH1_PHY>; |
| }; |
| |
| rc: rc@fe518000 { |
| compatible = "st,comms-irb"; |
| reg = <0xfe518000 0x234>; |
| interrupts = <0 203 0>; |
| rx-mode = "infrared"; |
| clocks = <&clk_sysin>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_ir>; |
| resets = <&softreset STIH416_IRB_SOFTRESET>; |
| }; |
| |
| /* FSM */ |
| spifsm: spifsm@fe902000 { |
| compatible = "st,spi-fsm"; |
| reg = <0xfe902000 0x1000>; |
| pinctrl-0 = <&pinctrl_fsm>; |
| |
| st,syscfg = <&syscfg_rear>; |
| st,boot-device-reg = <0x958>; |
| st,boot-device-spi = <0x1a>; |
| |
| status = "disabled"; |
| }; |
| |
| keyscan: keyscan@fe4b0000 { |
| compatible = "st,sti-keyscan"; |
| status = "disabled"; |
| reg = <0xfe4b0000 0x2000>; |
| interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>; |
| clocks = <&clk_sysin>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_keyscan>; |
| resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, |
| <&softreset STIH416_KEYSCAN_SOFTRESET>; |
| }; |
| }; |
| }; |