libata: convert to using sg helpers
This converts libata to using the sg helpers for looking up sg
elements, instead of doing it manually.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 68699b3..e52c331 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1410,7 +1410,7 @@
*/
unsigned ata_exec_internal_sg(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
- int dma_dir, struct scatterlist *sg,
+ int dma_dir, struct scatterlist *sgl,
unsigned int n_elem, unsigned long timeout)
{
struct ata_link *link = dev->link;
@@ -1472,11 +1472,12 @@
qc->dma_dir = dma_dir;
if (dma_dir != DMA_NONE) {
unsigned int i, buflen = 0;
+ struct scatterlist *sg;
- for (i = 0; i < n_elem; i++)
- buflen += sg[i].length;
+ for_each_sg(sgl, sg, n_elem, i)
+ buflen += sg->length;
- ata_sg_init(qc, sg, n_elem);
+ ata_sg_init(qc, sgl, n_elem);
qc->nbytes = buflen;
}
@@ -4292,7 +4293,7 @@
if (qc->n_elem)
dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
/* restore last sg */
- sg[qc->orig_n_elem - 1].length += qc->pad_len;
+ sg_last(sg, qc->orig_n_elem)->length += qc->pad_len;
if (pad_buf) {
struct scatterlist *psg = &qc->pad_sgent;
void *addr = kmap_atomic(psg->page, KM_IRQ0);
@@ -4547,6 +4548,7 @@
qc->orig_n_elem = 1;
qc->buf_virt = buf;
qc->nbytes = buflen;
+ qc->cursg = qc->__sg;
sg_init_one(&qc->sgent, buf, buflen);
}
@@ -4572,6 +4574,7 @@
qc->__sg = sg;
qc->n_elem = n_elem;
qc->orig_n_elem = n_elem;
+ qc->cursg = qc->__sg;
}
/**
@@ -4661,7 +4664,7 @@
{
struct ata_port *ap = qc->ap;
struct scatterlist *sg = qc->__sg;
- struct scatterlist *lsg = &sg[qc->n_elem - 1];
+ struct scatterlist *lsg = sg_last(qc->__sg, qc->n_elem);
int n_elem, pre_n_elem, dir, trim_sg = 0;
VPRINTK("ENTER, ata%u\n", ap->print_id);
@@ -4825,7 +4828,6 @@
static void ata_pio_sector(struct ata_queued_cmd *qc)
{
int do_write = (qc->tf.flags & ATA_TFLAG_WRITE);
- struct scatterlist *sg = qc->__sg;
struct ata_port *ap = qc->ap;
struct page *page;
unsigned int offset;
@@ -4834,8 +4836,8 @@
if (qc->curbytes == qc->nbytes - qc->sect_size)
ap->hsm_task_state = HSM_ST_LAST;
- page = sg[qc->cursg].page;
- offset = sg[qc->cursg].offset + qc->cursg_ofs;
+ page = qc->cursg->page;
+ offset = qc->cursg->offset + qc->cursg_ofs;
/* get the current page and offset */
page = nth_page(page, (offset >> PAGE_SHIFT));
@@ -4863,8 +4865,8 @@
qc->curbytes += qc->sect_size;
qc->cursg_ofs += qc->sect_size;
- if (qc->cursg_ofs == (&sg[qc->cursg])->length) {
- qc->cursg++;
+ if (qc->cursg_ofs == qc->cursg->length) {
+ qc->cursg = sg_next(qc->cursg);
qc->cursg_ofs = 0;
}
}
@@ -4959,7 +4961,7 @@
ap->hsm_task_state = HSM_ST_LAST;
next_sg:
- if (unlikely(qc->cursg >= qc->n_elem)) {
+ if (unlikely(qc->cursg == sg_last(qc->__sg, qc->n_elem))) {
/*
* The end of qc->sg is reached and the device expects
* more data to transfer. In order not to overrun qc->sg
@@ -4982,7 +4984,7 @@
return;
}
- sg = &qc->__sg[qc->cursg];
+ sg = qc->cursg;
page = sg->page;
offset = sg->offset + qc->cursg_ofs;
@@ -5021,7 +5023,7 @@
qc->cursg_ofs += count;
if (qc->cursg_ofs == sg->length) {
- qc->cursg++;
+ qc->cursg = sg_next(qc->cursg);
qc->cursg_ofs = 0;
}
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 229a9ff..377e6d4 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -29,7 +29,7 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
-#include <asm/scatterlist.h>
+#include <linux/scatterlist.h>
#include <linux/io.h>
#include <linux/ata.h>
#include <linux/workqueue.h>
@@ -416,6 +416,7 @@
unsigned long flags; /* ATA_QCFLAG_xxx */
unsigned int tag;
unsigned int n_elem;
+ unsigned int n_iter;
unsigned int orig_n_elem;
int dma_dir;
@@ -426,7 +427,7 @@
unsigned int nbytes;
unsigned int curbytes;
- unsigned int cursg;
+ struct scatterlist *cursg;
unsigned int cursg_ofs;
struct scatterlist sgent;
@@ -1043,7 +1044,7 @@
return 1;
if (qc->pad_len)
return 0;
- if (((sg - qc->__sg) + 1) == qc->n_elem)
+ if (qc->n_iter == qc->n_elem)
return 1;
return 0;
}
@@ -1051,6 +1052,7 @@
static inline struct scatterlist *
ata_qc_first_sg(struct ata_queued_cmd *qc)
{
+ qc->n_iter = 0;
if (qc->n_elem)
return qc->__sg;
if (qc->pad_len)
@@ -1063,8 +1065,8 @@
{
if (sg == &qc->pad_sgent)
return NULL;
- if (++sg - qc->__sg < qc->n_elem)
- return sg;
+ if (++qc->n_iter < qc->n_elem)
+ return sg_next(sg);
if (qc->pad_len)
return &qc->pad_sgent;
return NULL;
@@ -1309,9 +1311,11 @@
qc->dma_dir = DMA_NONE;
qc->__sg = NULL;
qc->flags = 0;
- qc->cursg = qc->cursg_ofs = 0;
+ qc->cursg = NULL;
+ qc->cursg_ofs = 0;
qc->nbytes = qc->curbytes = 0;
qc->n_elem = 0;
+ qc->n_iter = 0;
qc->err_mask = 0;
qc->pad_len = 0;
qc->sect_size = ATA_SECT_SIZE;