stmmac: convert to dev_pm_ops.
This patch updates the PM support using the dev_pm_ops
and reviews the hibernation support.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index b806cd3..f1dbc18 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -844,8 +844,6 @@
if (priv->plat->tx_coe)
pr_info("\tTX Checksum insertion supported\n");
- priv->shutdown = 0;
-
/* Initialise the MMC (if present) to disable all interrupts. */
writel(0xffffffff, priv->ioaddr + MMC_HIGH_INTR_MASK);
writel(0xffffffff, priv->ioaddr + MMC_LOW_INTR_MASK);
@@ -1799,61 +1797,53 @@
}
#ifdef CONFIG_PM
-static int stmmac_suspend(struct platform_device *pdev, pm_message_t state)
+static int stmmac_suspend(struct device *dev)
{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct stmmac_priv *priv = netdev_priv(dev);
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
int dis_ic = 0;
- if (!dev || !netif_running(dev))
+ if (!ndev || !netif_running(ndev))
return 0;
spin_lock(&priv->lock);
- if (state.event == PM_EVENT_SUSPEND) {
- netif_device_detach(dev);
- netif_stop_queue(dev);
- if (priv->phydev)
- phy_stop(priv->phydev);
+ netif_device_detach(ndev);
+ netif_stop_queue(ndev);
+ if (priv->phydev)
+ phy_stop(priv->phydev);
#ifdef CONFIG_STMMAC_TIMER
- priv->tm->timer_stop();
- if (likely(priv->tm->enable))
- dis_ic = 1;
+ priv->tm->timer_stop();
+ if (likely(priv->tm->enable))
+ dis_ic = 1;
#endif
- napi_disable(&priv->napi);
+ napi_disable(&priv->napi);
- /* Stop TX/RX DMA */
- priv->hw->dma->stop_tx(priv->ioaddr);
- priv->hw->dma->stop_rx(priv->ioaddr);
- /* Clear the Rx/Tx descriptors */
- priv->hw->desc->init_rx_desc(priv->dma_rx, priv->dma_rx_size,
- dis_ic);
- priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
+ /* Stop TX/RX DMA */
+ priv->hw->dma->stop_tx(priv->ioaddr);
+ priv->hw->dma->stop_rx(priv->ioaddr);
+ /* Clear the Rx/Tx descriptors */
+ priv->hw->desc->init_rx_desc(priv->dma_rx, priv->dma_rx_size,
+ dis_ic);
+ priv->hw->desc->init_tx_desc(priv->dma_tx, priv->dma_tx_size);
- /* Enable Power down mode by programming the PMT regs */
- if (device_can_wakeup(priv->device))
- priv->hw->mac->pmt(priv->ioaddr, priv->wolopts);
- else
- stmmac_disable_mac(priv->ioaddr);
- } else {
- priv->shutdown = 1;
- /* Although this can appear slightly redundant it actually
- * makes fast the standby operation and guarantees the driver
- * working if hibernation is on media. */
- stmmac_release(dev);
- }
+ /* Enable Power down mode by programming the PMT regs */
+ if (device_may_wakeup(priv->device))
+ priv->hw->mac->pmt(priv->ioaddr, priv->wolopts);
+ else
+ stmmac_disable_mac(priv->ioaddr);
spin_unlock(&priv->lock);
return 0;
}
-static int stmmac_resume(struct platform_device *pdev)
+static int stmmac_resume(struct device *dev)
{
- struct net_device *dev = platform_get_drvdata(pdev);
- struct stmmac_priv *priv = netdev_priv(dev);
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
- if (!netif_running(dev))
+ if (!netif_running(ndev))
return 0;
if (priv->shutdown) {
@@ -1870,10 +1860,10 @@
* is received. Anyway, it's better to manually clear
* this bit because it can generate problems while resuming
* from another devices (e.g. serial console). */
- if (device_can_wakeup(priv->device))
+ if (device_may_wakeup(priv->device))
priv->hw->mac->pmt(priv->ioaddr, 0);
- netif_device_attach(dev);
+ netif_device_attach(ndev);
/* Enable the MAC and DMA */
stmmac_enable_mac(priv->ioaddr);
@@ -1881,31 +1871,59 @@
priv->hw->dma->start_rx(priv->ioaddr);
#ifdef CONFIG_STMMAC_TIMER
- priv->tm->timer_start(tmrate);
+ if (likely(priv->tm->enable))
+ priv->tm->timer_start(tmrate);
#endif
napi_enable(&priv->napi);
if (priv->phydev)
phy_start(priv->phydev);
- netif_start_queue(dev);
+ netif_start_queue(ndev);
spin_unlock(&priv->lock);
return 0;
}
-#endif
-static struct platform_driver stmmac_driver = {
- .driver = {
- .name = STMMAC_RESOURCE_NAME,
- },
- .probe = stmmac_dvr_probe,
- .remove = stmmac_dvr_remove,
-#ifdef CONFIG_PM
+static int stmmac_freeze(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+
+ if (!ndev || !netif_running(ndev))
+ return 0;
+
+ return stmmac_release(ndev);
+}
+
+static int stmmac_restore(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+
+ if (!ndev || !netif_running(ndev))
+ return 0;
+
+ return stmmac_open(ndev);
+}
+
+static const struct dev_pm_ops stmmac_pm_ops = {
.suspend = stmmac_suspend,
.resume = stmmac_resume,
-#endif
+ .freeze = stmmac_freeze,
+ .thaw = stmmac_restore,
+ .restore = stmmac_restore,
+};
+#else
+static const struct dev_pm_ops stmmac_pm_ops;
+#endif /* CONFIG_PM */
+static struct platform_driver stmmac_driver = {
+ .probe = stmmac_dvr_probe,
+ .remove = stmmac_dvr_remove,
+ .driver = {
+ .name = STMMAC_RESOURCE_NAME,
+ .owner = THIS_MODULE,
+ .pm = &stmmac_pm_ops,
+ },
};
/**