V4L/DVB (7663): budget: Support for Activy budget card with BSBE1 tuner
Add support for Activy budget card with BSBE1 tuner, subsystem id 0x1131:0x4f60.
Low band and DiSEqC support should work now (BSBE1 and BSRU6 tuner).
Signed-off-by: Oliver Endriss <o.endriss@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c
index 7adfe17..2293d80 100644
--- a/drivers/media/dvb/ttpci/budget.c
+++ b/drivers/media/dvb/ttpci/budget.c
@@ -45,6 +45,7 @@
#include "tda826x.h"
#include "lnbp21.h"
#include "bsru6.h"
+#include "bsbe1.h"
static int diseqc_method;
module_param(diseqc_method, int, 0444);
@@ -368,6 +369,38 @@
.xtal_freq = TDA10086_XTAL_16M,
};
+static struct stv0299_config alps_bsru6_config_activy = {
+ .demod_address = 0x68,
+ .inittab = alps_bsru6_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .op0_off = 1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = alps_bsru6_set_symbol_rate,
+};
+
+static struct stv0299_config alps_bsbe1_config_activy = {
+ .demod_address = 0x68,
+ .inittab = alps_bsbe1_inittab,
+ .mclk = 88000000UL,
+ .invert = 1,
+ .op0_off = 1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = alps_bsbe1_set_symbol_rate,
+};
+
+
+static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg)
+{
+ u8 val;
+ struct i2c_msg msg[] = {
+ { .addr = adr, .flags = 0, .buf = ®, .len = 1 },
+ { .addr = adr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
+ };
+
+ return (i2c_transfer(i2c, msg, 2) != 2) ? -EIO : val;
+}
+
static u8 read_pwm(struct budget* budget)
{
u8 b = 0xff;
@@ -383,6 +416,8 @@
static void frontend_init(struct budget *budget)
{
+ (void)alps_bsbe1_config; /* avoid warning */
+
switch(budget->dev->pci->subsystem_device) {
case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
case 0x1013:
@@ -428,15 +463,43 @@
}
break;
- case 0x4f60: // Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/ALPS BSRU6(tsa5059))
- budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap);
- if (budget->dvb_frontend) {
- budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
- budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
- budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
- budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
+ case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/tsa5059) */
+ {
+ int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67);
+
+ if (subtype < 0)
+ break;
+ /* fixme: find a better way to identify the card */
+ if (subtype < 0x36) {
+ /* assume ALPS BSRU6 */
+ budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config_activy, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ printk(KERN_INFO "budget: tuner ALPS BSRU6 detected\n");
+ budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
+ budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
+ budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
+ budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
+ break;
+ }
+ } else {
+ /* assume ALPS BSBE1 */
+ /* reset tuner */
+ saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTLO);
+ msleep(50);
+ saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTHI);
+ msleep(250);
+ budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config_activy, &budget->i2c_adap);
+ if (budget->dvb_frontend) {
+ printk(KERN_INFO "budget: tuner ALPS BSBE1 detected\n");
+ budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params;
+ budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
+ budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
+ budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
+ break;
+ }
}
break;
+ }
case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522))
budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap);