| /* |
| * AS3711 PMIC regulator driver, using DCDC Step Down and LDO supplies |
| * |
| * Copyright (C) 2012 Renesas Electronics Corporation |
| * Author: Guennadi Liakhovetski, <g.liakhovetski@gmx.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the version 2 of the GNU General Public License as |
| * published by the Free Software Foundation |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/mfd/as3711.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/slab.h> |
| |
| struct as3711_regulator_info { |
| struct regulator_desc desc; |
| unsigned int max_uV; |
| }; |
| |
| struct as3711_regulator { |
| struct as3711_regulator_info *reg_info; |
| struct regulator_dev *rdev; |
| }; |
| |
| static int as3711_list_voltage_sd(struct regulator_dev *rdev, |
| unsigned int selector) |
| { |
| if (selector >= rdev->desc->n_voltages) |
| return -EINVAL; |
| |
| if (!selector) |
| return 0; |
| if (selector < 0x41) |
| return 600000 + selector * 12500; |
| if (selector < 0x71) |
| return 1400000 + (selector - 0x40) * 25000; |
| return 2600000 + (selector - 0x70) * 50000; |
| } |
| |
| static int as3711_list_voltage_aldo(struct regulator_dev *rdev, |
| unsigned int selector) |
| { |
| if (selector >= rdev->desc->n_voltages) |
| return -EINVAL; |
| |
| if (selector < 0x10) |
| return 1200000 + selector * 50000; |
| return 1800000 + (selector - 0x10) * 100000; |
| } |
| |
| static int as3711_list_voltage_dldo(struct regulator_dev *rdev, |
| unsigned int selector) |
| { |
| if (selector >= rdev->desc->n_voltages || |
| (selector > 0x10 && selector < 0x20)) |
| return -EINVAL; |
| |
| if (selector < 0x11) |
| return 900000 + selector * 50000; |
| return 1750000 + (selector - 0x20) * 50000; |
| } |
| |
| static int as3711_bound_check(struct regulator_dev *rdev, |
| int *min_uV, int *max_uV) |
| { |
| struct as3711_regulator *reg = rdev_get_drvdata(rdev); |
| struct as3711_regulator_info *info = reg->reg_info; |
| |
| dev_dbg(&rdev->dev, "%s(), %d, %d, %d\n", __func__, |
| *min_uV, rdev->desc->min_uV, info->max_uV); |
| |
| if (*max_uV < *min_uV || |
| *min_uV > info->max_uV || rdev->desc->min_uV > *max_uV) |
| return -EINVAL; |
| |
| if (rdev->desc->n_voltages == 1) |
| return 0; |
| |
| if (*max_uV > info->max_uV) |
| *max_uV = info->max_uV; |
| |
| if (*min_uV < rdev->desc->min_uV) |
| *min_uV = rdev->desc->min_uV; |
| |
| return *min_uV; |
| } |
| |
| static int as3711_sel_check(int min, int max, int bottom, int step) |
| { |
| int sel, voltage; |
| |
| /* Round up min, when dividing: keeps us within the range */ |
| sel = DIV_ROUND_UP(min - bottom, step); |
| voltage = sel * step + bottom; |
| pr_debug("%s(): select %d..%d in %d+N*%d: %d\n", __func__, |
| min, max, bottom, step, sel); |
| if (voltage > max) |
| return -EINVAL; |
| |
| return sel; |
| } |
| |
| static int as3711_map_voltage_sd(struct regulator_dev *rdev, |
| int min_uV, int max_uV) |
| { |
| int ret; |
| |
| ret = as3711_bound_check(rdev, &min_uV, &max_uV); |
| if (ret <= 0) |
| return ret; |
| |
| if (min_uV <= 1400000) |
| return as3711_sel_check(min_uV, max_uV, 600000, 12500); |
| |
| if (min_uV <= 2600000) |
| return as3711_sel_check(min_uV, max_uV, 1400000, 25000) + 0x40; |
| |
| return as3711_sel_check(min_uV, max_uV, 2600000, 50000) + 0x70; |
| } |
| |
| /* |
| * The regulator API supports 4 modes of operataion: FAST, NORMAL, IDLE and |
| * STANDBY. We map them in the following way to AS3711 SD1-4 DCDC modes: |
| * FAST: sdX_fast=1 |
| * NORMAL: low_noise=1 |
| * IDLE: low_noise=0 |
| */ |
| |
| static int as3711_set_mode_sd(struct regulator_dev *rdev, unsigned int mode) |
| { |
| unsigned int fast_bit = rdev->desc->enable_mask, |
| low_noise_bit = fast_bit << 4; |
| u8 val; |
| |
| switch (mode) { |
| case REGULATOR_MODE_FAST: |
| val = fast_bit | low_noise_bit; |
| break; |
| case REGULATOR_MODE_NORMAL: |
| val = low_noise_bit; |
| break; |
| case REGULATOR_MODE_IDLE: |
| val = 0; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return regmap_update_bits(rdev->regmap, AS3711_SD_CONTROL_1, |
| low_noise_bit | fast_bit, val); |
| } |
| |
| static unsigned int as3711_get_mode_sd(struct regulator_dev *rdev) |
| { |
| unsigned int fast_bit = rdev->desc->enable_mask, |
| low_noise_bit = fast_bit << 4, mask = fast_bit | low_noise_bit; |
| unsigned int val; |
| int ret = regmap_read(rdev->regmap, AS3711_SD_CONTROL_1, &val); |
| |
| if (ret < 0) |
| return ret; |
| |
| if ((val & mask) == mask) |
| return REGULATOR_MODE_FAST; |
| |
| if ((val & mask) == low_noise_bit) |
| return REGULATOR_MODE_NORMAL; |
| |
| if (!(val & mask)) |
| return REGULATOR_MODE_IDLE; |
| |
| return -EINVAL; |
| } |
| |
| static int as3711_map_voltage_aldo(struct regulator_dev *rdev, |
| int min_uV, int max_uV) |
| { |
| int ret; |
| |
| ret = as3711_bound_check(rdev, &min_uV, &max_uV); |
| if (ret <= 0) |
| return ret; |
| |
| if (min_uV <= 1800000) |
| return as3711_sel_check(min_uV, max_uV, 1200000, 50000); |
| |
| return as3711_sel_check(min_uV, max_uV, 1800000, 100000) + 0x10; |
| } |
| |
| static int as3711_map_voltage_dldo(struct regulator_dev *rdev, |
| int min_uV, int max_uV) |
| { |
| int ret; |
| |
| ret = as3711_bound_check(rdev, &min_uV, &max_uV); |
| if (ret <= 0) |
| return ret; |
| |
| if (min_uV <= 1700000) |
| return as3711_sel_check(min_uV, max_uV, 900000, 50000); |
| |
| return as3711_sel_check(min_uV, max_uV, 1750000, 50000) + 0x20; |
| } |
| |
| static struct regulator_ops as3711_sd_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = as3711_list_voltage_sd, |
| .map_voltage = as3711_map_voltage_sd, |
| .get_mode = as3711_get_mode_sd, |
| .set_mode = as3711_set_mode_sd, |
| }; |
| |
| static struct regulator_ops as3711_aldo_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = as3711_list_voltage_aldo, |
| .map_voltage = as3711_map_voltage_aldo, |
| }; |
| |
| static struct regulator_ops as3711_dldo_ops = { |
| .is_enabled = regulator_is_enabled_regmap, |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .list_voltage = as3711_list_voltage_dldo, |
| .map_voltage = as3711_map_voltage_dldo, |
| }; |
| |
| #define AS3711_REG(_id, _en_reg, _en_bit, _vmask, _vshift, _min_uV, _max_uV, _sfx) \ |
| [AS3711_REGULATOR_ ## _id] = { \ |
| .desc = { \ |
| .name = "as3711-regulator-" # _id, \ |
| .id = AS3711_REGULATOR_ ## _id, \ |
| .n_voltages = (_vmask + 1), \ |
| .ops = &as3711_ ## _sfx ## _ops, \ |
| .type = REGULATOR_VOLTAGE, \ |
| .owner = THIS_MODULE, \ |
| .vsel_reg = AS3711_ ## _id ## _VOLTAGE, \ |
| .vsel_mask = _vmask << _vshift, \ |
| .enable_reg = AS3711_ ## _en_reg, \ |
| .enable_mask = BIT(_en_bit), \ |
| .min_uV = _min_uV, \ |
| }, \ |
| .max_uV = _max_uV, \ |
| } |
| |
| static struct as3711_regulator_info as3711_reg_info[] = { |
| AS3711_REG(SD_1, SD_CONTROL, 0, 0x7f, 0, 612500, 3350000, sd), |
| AS3711_REG(SD_2, SD_CONTROL, 1, 0x7f, 0, 612500, 3350000, sd), |
| AS3711_REG(SD_3, SD_CONTROL, 2, 0x7f, 0, 612500, 3350000, sd), |
| AS3711_REG(SD_4, SD_CONTROL, 3, 0x7f, 0, 612500, 3350000, sd), |
| AS3711_REG(LDO_1, LDO_1_VOLTAGE, 7, 0x1f, 0, 1200000, 3300000, aldo), |
| AS3711_REG(LDO_2, LDO_2_VOLTAGE, 7, 0x1f, 0, 1200000, 3300000, aldo), |
| AS3711_REG(LDO_3, LDO_3_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), |
| AS3711_REG(LDO_4, LDO_4_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), |
| AS3711_REG(LDO_5, LDO_5_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), |
| AS3711_REG(LDO_6, LDO_6_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), |
| AS3711_REG(LDO_7, LDO_7_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), |
| AS3711_REG(LDO_8, LDO_8_VOLTAGE, 7, 0x3f, 0, 900000, 3300000, dldo), |
| /* StepUp output voltage depends on supplying regulator */ |
| }; |
| |
| #define AS3711_REGULATOR_NUM ARRAY_SIZE(as3711_reg_info) |
| |
| static int as3711_regulator_probe(struct platform_device *pdev) |
| { |
| struct as3711_regulator_pdata *pdata = dev_get_platdata(&pdev->dev); |
| struct as3711 *as3711 = dev_get_drvdata(pdev->dev.parent); |
| struct regulator_init_data *reg_data; |
| struct regulator_config config = {.dev = &pdev->dev,}; |
| struct as3711_regulator *reg = NULL; |
| struct as3711_regulator *regs; |
| struct regulator_dev *rdev; |
| struct as3711_regulator_info *ri; |
| int ret; |
| int id; |
| |
| if (!pdata) |
| dev_dbg(&pdev->dev, "No platform data...\n"); |
| |
| regs = devm_kzalloc(&pdev->dev, AS3711_REGULATOR_NUM * |
| sizeof(struct as3711_regulator), GFP_KERNEL); |
| if (!regs) { |
| dev_err(&pdev->dev, "Memory allocation failed exiting..\n"); |
| return -ENOMEM; |
| } |
| |
| for (id = 0, ri = as3711_reg_info; id < AS3711_REGULATOR_NUM; ++id, ri++) { |
| reg_data = pdata ? pdata->init_data[id] : NULL; |
| |
| /* No need to register if there is no regulator data */ |
| if (!reg_data) |
| continue; |
| |
| reg = ®s[id]; |
| reg->reg_info = ri; |
| |
| config.init_data = reg_data; |
| config.driver_data = reg; |
| config.regmap = as3711->regmap; |
| |
| rdev = regulator_register(&ri->desc, &config); |
| if (IS_ERR(rdev)) { |
| dev_err(&pdev->dev, "Failed to register regulator %s\n", |
| ri->desc.name); |
| ret = PTR_ERR(rdev); |
| goto eregreg; |
| } |
| reg->rdev = rdev; |
| } |
| platform_set_drvdata(pdev, regs); |
| return 0; |
| |
| eregreg: |
| while (--id >= 0) |
| regulator_unregister(regs[id].rdev); |
| |
| return ret; |
| } |
| |
| static int as3711_regulator_remove(struct platform_device *pdev) |
| { |
| struct as3711_regulator *regs = platform_get_drvdata(pdev); |
| int id; |
| |
| for (id = 0; id < AS3711_REGULATOR_NUM; ++id) |
| regulator_unregister(regs[id].rdev); |
| return 0; |
| } |
| |
| static struct platform_driver as3711_regulator_driver = { |
| .driver = { |
| .name = "as3711-regulator", |
| .owner = THIS_MODULE, |
| }, |
| .probe = as3711_regulator_probe, |
| .remove = as3711_regulator_remove, |
| }; |
| |
| static int __init as3711_regulator_init(void) |
| { |
| return platform_driver_register(&as3711_regulator_driver); |
| } |
| subsys_initcall(as3711_regulator_init); |
| |
| static void __exit as3711_regulator_exit(void) |
| { |
| platform_driver_unregister(&as3711_regulator_driver); |
| } |
| module_exit(as3711_regulator_exit); |
| |
| MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>"); |
| MODULE_DESCRIPTION("AS3711 regulator driver"); |
| MODULE_ALIAS("platform:as3711-regulator"); |
| MODULE_LICENSE("GPL v2"); |